| /****************************************************************************** |
| * |
| * Name: skgeinit.h |
| * Project: GEnesis, PCI Gigabit Ethernet Adapter |
| * Version: $Revision: 1.75 $ |
| * Date: $Date: 2003/02/05 13:36:39 $ |
| * Purpose: Structures and prototypes for the GE Init Module |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * (C)Copyright 1998-2003 SysKonnect GmbH. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * The information in this file is provided "AS IS" without warranty. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * History: |
| * |
| * $Log: skgeinit.h,v $ |
| * Revision 1.75 2003/02/05 13:36:39 rschmidt |
| * Added define SK_FACT_78 for YUKON's Host Clock of 78.12 MHz |
| * Editorial changes |
| * |
| * Revision 1.74 2003/01/28 09:39:16 rschmidt |
| * Added entry GIYukonLite in s_GeInit structure |
| * Editorial changes |
| * |
| * Revision 1.73 2002/11/15 12:47:25 rschmidt |
| * Replaced error message SKERR_HWI_E024 for Cable Diagnostic with |
| * Rx queue error in SkGeStopPort(). |
| * |
| * Revision 1.72 2002/11/12 17:08:35 rschmidt |
| * Added entries for Cable Diagnostic to Port structure |
| * Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure |
| * Added error message for Cable Diagnostic |
| * Added prototypes for SkGmCableDiagStatus() |
| * Editorial changes |
| * |
| * Revision 1.71 2002/10/21 11:26:10 mkarl |
| * Changed interface of SkGeInitAssignRamToQueues(). |
| * |
| * Revision 1.70 2002/10/14 08:21:32 rschmidt |
| * Changed type of GICopperType, GIVauxAvail to SK_BOOL |
| * Added entry PRxOverCnt to Port structure |
| * Added entry GIYukon32Bit in s_GeInit structure |
| * Editorial changes |
| * |
| * Revision 1.69 2002/10/09 16:57:15 mkarl |
| * Added some constants and macros for SkGeInitAssignRamToQueues(). |
| * |
| * Revision 1.68 2002/09/12 08:58:51 rwahl |
| * Retrieve counters needed for XMAC errata workarounds directly because |
| * PNMI returns corrected counter values (e.g. #10620). |
| * |
| * Revision 1.67 2002/08/16 14:40:30 rschmidt |
| * Added entries GIGenesis and GICopperType in s_GeInit structure |
| * Added prototypes for SkMacHashing() |
| * Editorial changes |
| * |
| * Revision 1.66 2002/08/12 13:27:21 rschmidt |
| * Added defines for Link speed capabilities |
| * Added entry PLinkSpeedCap to Port structure |
| * Added entry GIVauxAvail in s_GeInit structure |
| * Added prototypes for SkMacPromiscMode() |
| * Editorial changes |
| * |
| * Revision 1.65 2002/08/08 15:46:18 rschmidt |
| * Added define SK_PHY_ACC_TO for PHY access timeout |
| * Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark |
| * Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size |
| * Added entry PhyId1 to Port structure |
| * |
| * Revision 1.64 2002/07/23 16:02:56 rschmidt |
| * Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.) |
| * Added prototypes for: SkGePhyRead(), SkGePhyWrite() |
| * |
| * Revision 1.63 2002/07/18 08:17:38 rwahl |
| * Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx. |
| * |
| * Revision 1.62 2002/07/17 18:21:55 rwahl |
| * Added SK_LSPEED_INDETERMINATED define. |
| * |
| * Revision 1.61 2002/07/17 17:16:03 rwahl |
| * - MacType now member of GIni struct. |
| * - Struct alignment to 32bit. |
| * - Editorial change. |
| * |
| * Revision 1.60 2002/07/15 18:23:39 rwahl |
| * Added GeMacFunc to GE Init structure. |
| * Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(), |
| * SkXmMacStatistic(), SkGmMacStatistic(), SkXmResetCounter(), |
| * SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus(). |
| * Added defines for current link speed state. |
| * Added ERRMSG defintions for MacUpdateStat() & MacStatistics(). |
| * |
| * Revision 1.59 2002/07/15 15:40:22 rschmidt |
| * Added entry PLinkSpeedUsed to Port structure |
| * Editorial changes |
| * |
| * Revision 1.58 2002/06/10 09:36:30 rschmidt |
| * Editorial changes. |
| * |
| * Revision 1.57 2002/06/05 08:18:00 rschmidt |
| * Corrected alignment in Port Structure |
| * Added new prototypes for GMAC |
| * Editorial changes |
| * |
| * Revision 1.56 2002/04/25 11:38:12 rschmidt |
| * Added defines for Link speed values |
| * Added defines for Loopback parameters for MAC and PHY |
| * Removed entry PRxCmd from Port structure |
| * Added entry PLinkSpeed to Port structure |
| * Added entries GIChipId and GIChipRev to GE Init structure |
| * Removed entry GIAnyPortAct from GE Init structure |
| * Added prototypes for: SkMacInit(), SkMacInitPhy(), |
| * SkMacRxTxDisable(), SkMacSoftRst(), SkMacHardRst(), SkMacIrq(), |
| * SkMacIrqDisable(), SkMacFlushTxFifo(), SkMacFlushRxFifo(), |
| * SkMacAutoNegDone(), SkMacAutoNegLipaPhy(), SkMacSetRxTxEn(), |
| * SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite(); |
| * Removed prototypes for static functions in SkXmac2.c |
| * Editorial changes |
| * |
| * Revision 1.55 2002/02/26 15:24:53 rwahl |
| * Fix: no link with manual configuration (#10673). The previous fix for |
| * #10639 was removed. So for RLMT mode = CLS the RLMT may switch to |
| * misconfigured port. It should not occur for the other RLMT modes. |
| * |
| * Revision 1.54 2002/01/18 16:52:52 rwahl |
| * Editorial corrections. |
| * |
| * Revision 1.53 2001/11/20 09:19:58 rwahl |
| * Reworked bugfix #10639 (no dependency to RLMT mode). |
| * |
| * Revision 1.52 2001/10/26 07:52:23 afischer |
| * Port switching bug in `check local link` mode |
| * |
| * Revision 1.51 2001/02/09 12:26:38 cgoos |
| * Inserted #ifdef DIAG for half duplex workaround timer. |
| * |
| * Revision 1.50 2001/02/07 07:56:40 rassmann |
| * Corrected copyright. |
| * |
| * Revision 1.49 2001/01/31 15:32:18 gklug |
| * fix: problem with autosensing an SR8800 switch |
| * add: counter for autoneg timeouts |
| * |
| * Revision 1.48 2000/11/09 11:30:10 rassmann |
| * WA: Waiting after releasing reset until BCom chip is accessible. |
| * |
| * Revision 1.47 2000/10/18 12:22:40 cgoos |
| * Added workaround for half duplex hangup. |
| * |
| * Revision 1.46 2000/08/10 11:28:00 rassmann |
| * Editorial changes. |
| * Preserving 32-bit alignment in structs for the adapter context. |
| * |
| * Revision 1.45 1999/11/22 13:56:19 cgoos |
| * Changed license header to GPL. |
| * |
| * Revision 1.44 1999/10/26 07:34:15 malthoff |
| * The define SK_LNK_ON has been lost in v1.41. |
| * |
| * Revision 1.43 1999/10/06 09:30:16 cgoos |
| * Changed SK_XM_THR_JUMBO. |
| * |
| * Revision 1.42 1999/09/16 12:58:26 cgoos |
| * Changed SK_LED_STANDY macro to be independent of HW link sync. |
| * |
| * Revision 1.41 1999/07/30 06:56:14 malthoff |
| * Correct comment for SK_MS_STAT_UNSET. |
| * |
| * Revision 1.40 1999/05/27 13:38:46 cgoos |
| * Added SK_BMU_TX_WM. |
| * Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable. |
| * Changed XMAC Tx treshold to max. values. |
| * |
| * Revision 1.39 1999/05/20 14:35:26 malthoff |
| * Remove prototypes for SkGeLinkLED(). |
| * |
| * Revision 1.38 1999/05/19 11:59:12 cgoos |
| * Added SK_MS_CAP_INDETERMINATED define. |
| * |
| * Revision 1.37 1999/05/19 07:32:33 cgoos |
| * Changes for 1000Base-T. |
| * LED-defines for HWAC_LINK_LED macro. |
| * |
| * Revision 1.36 1999/04/08 14:00:24 gklug |
| * add:Port struct field PLinkResCt |
| * |
| * Revision 1.35 1999/03/25 07:43:07 malthoff |
| * Add error string for SKERR_HWI_E018MSG. |
| * |
| * Revision 1.34 1999/03/12 16:25:57 malthoff |
| * Remove PPollRxD and PPollTxD. |
| * Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX. |
| * |
| * Revision 1.33 1999/03/12 13:34:41 malthoff |
| * Add Autonegotiation error codes. |
| * Change defines for parameter Mode in SkXmSetRxCmd(). |
| * Replace __STDC__ by SK_KR_PROTO. |
| * |
| * Revision 1.32 1999/01/25 14:40:20 mhaveman |
| * Added new return states for the virtual management port if multiple |
| * ports are active but differently configured. |
| * |
| * Revision 1.31 1998/12/11 15:17:02 gklug |
| * add: Link partnet autoneg states : Unknown Manual and Auto-negotiation |
| * |
| * Revision 1.30 1998/12/07 12:17:04 gklug |
| * add: Link Partner auto-negotiation flag |
| * |
| * Revision 1.29 1998/12/01 10:54:42 gklug |
| * add: variables for XMAC Errata |
| * |
| * Revision 1.28 1998/12/01 10:14:15 gklug |
| * add: PIsave saves the Interrupt status word |
| * |
| * Revision 1.27 1998/11/26 15:24:52 mhaveman |
| * Added link status states SK_LMODE_STAT_AUTOHALF and |
| * SK_LMODE_STAT_AUTOFULL which are used by PNMI. |
| * |
| * Revision 1.26 1998/11/26 14:53:01 gklug |
| * add:autoNeg Timeout variable |
| * |
| * Revision 1.25 1998/11/26 08:58:50 gklug |
| * add: Link Mode configuration (AUTO Sense mode) |
| * |
| * Revision 1.24 1998/11/24 13:30:27 gklug |
| * add: PCheckPar to port struct |
| * |
| * Revision 1.23 1998/11/18 13:23:26 malthoff |
| * Add SK_PKT_TO_MAX. |
| * |
| * Revision 1.22 1998/11/18 13:19:54 gklug |
| * add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1 |
| * |
| * Revision 1.21 1998/10/26 08:02:57 malthoff |
| * Add GIRamOffs. |
| * |
| * Revision 1.20 1998/10/19 07:28:37 malthoff |
| * Add prototype for SkGeInitRamIface(). |
| * |
| * Revision 1.19 1998/10/14 14:47:48 malthoff |
| * SK_TIMER should not be defined for Diagnostics. |
| * Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG. |
| * |
| * Revision 1.18 1998/10/14 14:00:03 gklug |
| * add: timer to port struct for workaround of Errata #2 |
| * |
| * Revision 1.17 1998/10/14 11:23:09 malthoff |
| * Add prototype for SkXmAutoNegDone(). |
| * Fix SkXmSetRxCmd() prototype statement. |
| * |
| * Revision 1.16 1998/10/14 05:42:29 gklug |
| * add: HWLinkUp flag to Port struct |
| * |
| * Revision 1.15 1998/10/09 08:26:33 malthoff |
| * Rename SK_RB_ULPP_B to SK_RB_LLPP_B. |
| * |
| * Revision 1.14 1998/10/09 07:11:13 malthoff |
| * bug fix: SK_FACT_53 is 85 not 117. |
| * Rework time out init values. |
| * Add GIPortUsage and corresponding defines. |
| * Add some error log messages. |
| * |
| * Revision 1.13 1998/10/06 14:13:14 malthoff |
| * Add prototype for SkGeLoadLnkSyncCnt(). |
| * |
| * Revision 1.12 1998/10/05 11:29:53 malthoff |
| * bug fix: A comment was not closed. |
| * |
| * Revision 1.11 1998/10/05 08:01:59 malthoff |
| * Add default Timeout- Threshold- and |
| * Watermark constants. Add QRam start and end |
| * variables. Also add vars to store the polling |
| * mode and receive command. Add new Error Log |
| * Messages and function prototypes. |
| * |
| * Revision 1.10 1998/09/28 13:34:48 malthoff |
| * Add mode bits for LED functions. |
| * Move Autoneg and Flow Ctrl bits from shgesirq.h |
| * Add the required Error Log Entries |
| * and Function Prototypes. |
| * |
| * Revision 1.9 1998/09/16 14:38:41 malthoff |
| * Rework the SK_LNK_xxx defines. |
| * Add error log message defines. |
| * Add prototypes for skxmac2.c |
| * |
| * Revision 1.8 1998/09/11 05:29:18 gklug |
| * add: init state of a port |
| * |
| * Revision 1.7 1998/09/08 08:35:52 gklug |
| * add: defines of the Init Levels |
| * |
| * Revision 1.6 1998/09/03 13:48:42 gklug |
| * add: Link strati, capabilities to Port struct |
| * |
| * Revision 1.5 1998/09/03 13:30:59 malthoff |
| * Add SK_LNK_BLINK and SK_LNK_PERM. |
| * |
| * Revision 1.4 1998/09/03 09:55:31 malthoff |
| * Add constants for parameters Dir and RstMode |
| * when calling SkGeStopPort(). |
| * Rework the prototype section. |
| * Add Queue Address offsets PRxQOff, PXsQOff, and PXaQOff. |
| * Remove Ioc with IoC. |
| * |
| * Revision 1.3 1998/08/19 09:11:54 gklug |
| * fix: struct are removed from c-source (see CCC) |
| * add: typedefs for all structs |
| * |
| * Revision 1.2 1998/07/28 12:38:26 malthoff |
| * The prototypes got the parameter 'IoC'. |
| * |
| * Revision 1.1 1998/07/23 09:50:24 malthoff |
| * Created. |
| * |
| ******************************************************************************/ |
| |
| #ifndef __INC_SKGEINIT_H_ |
| #define __INC_SKGEINIT_H_ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /* defines ********************************************************************/ |
| |
| /* modifying Link LED behaviour (used with SkGeLinkLED()) */ |
| #define SK_LNK_OFF LED_OFF |
| #define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) |
| #define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON) |
| #define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON) |
| #define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF) |
| |
| /* parameter 'Mode' when calling SK_HWAC_LINK_LED() */ |
| #define SK_LED_OFF LED_OFF |
| #define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) |
| #define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF) |
| |
| /* addressing LED Registers in SkGeXmitLED() */ |
| #define XMIT_LED_INI 0 |
| #define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI) |
| #define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI) |
| #define XMIT_LED_TST (RX_LED_TST - RX_LED_INI) |
| |
| /* parameter 'Mode' when calling SkGeXmitLED() */ |
| #define SK_LED_DIS 0 |
| #define SK_LED_ENA 1 |
| #define SK_LED_TST 2 |
| |
| /* Counter and Timer constants, for a host clock of 62.5 MHz */ |
| #define SK_XMIT_DUR 0x002faf08L /* 50 ms */ |
| #define SK_BLK_DUR 0x01dcd650L /* 500 ms */ |
| |
| #define SK_DPOLL_DEF 0x00ee6b28L /* 250 ms at 62.5 MHz */ |
| |
| #define SK_DPOLL_MAX 0x00ffffffL /* 268 ms at 62.5 MHz */ |
| /* 215 ms at 78.12 MHz */ |
| |
| #define SK_FACT_62 100 /* is given in percent */ |
| #define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ |
| #define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ |
| |
| /* Timeout values */ |
| #define SK_MAC_TO_53 72 /* MAC arbiter timeout */ |
| #define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ |
| #define SK_PKT_TO_MAX 0xffff /* Maximum value */ |
| #define SK_RI_TO_53 36 /* RAM interface timeout */ |
| |
| #define SK_PHY_ACC_TO 600000 /* PHY access timeout */ |
| |
| /* RAM Buffer High Pause Threshold values */ |
| #define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */ |
| #define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ |
| #define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ |
| |
| #ifndef SK_BMU_RX_WM |
| #define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ |
| #endif |
| #ifndef SK_BMU_TX_WM |
| #define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ |
| #endif |
| |
| /* XMAC II Rx High Watermark */ |
| #define SK_XM_RX_HI_WM 0x05aa /* 1450 */ |
| |
| /* XMAC II Tx Threshold */ |
| #define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */ |
| #define SK_XM_THR_SL 0x01fb /* .. for single link adapters */ |
| #define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */ |
| #define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */ |
| |
| /* values for GIPortUsage */ |
| #define SK_RED_LINK 1 /* redundant link usage */ |
| #define SK_MUL_LINK 2 /* multiple link usage */ |
| #define SK_JUMBO_LINK 3 /* driver uses jumbo frames */ |
| |
| /* Minimum RAM Buffer Rx Queue Size */ |
| #define SK_MIN_RXQ_SIZE 16 /* 16 kB */ |
| |
| /* Minimum RAM Buffer Tx Queue Size */ |
| #define SK_MIN_TXQ_SIZE 16 /* 16 kB */ |
| |
| /* Queue Size units */ |
| #define QZ_UNITS 0x7 |
| #define QZ_STEP 8 |
| |
| /* Percentage of queue size from whole memory */ |
| /* 80 % for receive */ |
| #define RAM_QUOTA_RX 80L |
| /* 0% for sync transfer */ |
| #define RAM_QUOTA_SYNC 0L |
| /* the rest (20%) is taken for async transfer */ |
| |
| /* Get the rounded queue size in Bytes in 8k steps */ |
| #define ROUND_QUEUE_SIZE(SizeInBytes) \ |
| ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \ |
| ~(QZ_STEP-1)) |
| |
| /* Get the rounded queue size in KBytes in 8k steps */ |
| #define ROUND_QUEUE_SIZE_KB(Kilobytes) \ |
| ROUND_QUEUE_SIZE((Kilobytes) * 1024L) |
| |
| /* Types of RAM Buffer Queues */ |
| #define SK_RX_SRAM_Q 1 /* small receive queue */ |
| #define SK_RX_BRAM_Q 2 /* big receive queue */ |
| #define SK_TX_RAM_Q 3 /* small or big transmit queue */ |
| |
| /* parameter 'Dir' when calling SkGeStopPort() */ |
| #define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */ |
| #define SK_STOP_RX 2 /* Stops the receive path */ |
| #define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */ |
| |
| /* parameter 'RstMode' when calling SkGeStopPort() */ |
| #define SK_SOFT_RST 1 /* perform a software reset */ |
| #define SK_HARD_RST 2 /* perform a hardware reset */ |
| |
| /* Init Levels */ |
| #define SK_INIT_DATA 0 /* Init level 0: init data structures */ |
| #define SK_INIT_IO 1 /* Init level 1: init with IOs */ |
| #define SK_INIT_RUN 2 /* Init level 2: init for run time */ |
| |
| /* Link Mode Parameter */ |
| #define SK_LMODE_HALF 1 /* Half Duplex Mode */ |
| #define SK_LMODE_FULL 2 /* Full Duplex Mode */ |
| #define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */ |
| #define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */ |
| #define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */ |
| #define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */ |
| #define SK_LMODE_INDETERMINATED 7 /* indeterminated */ |
| |
| /* Auto-negotiation timeout in 100ms granularity */ |
| #define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */ |
| |
| /* Auto-negotiation error codes */ |
| #define SK_AND_OK 0 /* no error */ |
| #define SK_AND_OTHER 1 /* other error than below */ |
| #define SK_AND_DUP_CAP 2 /* Duplex capabilities error */ |
| |
| |
| /* Link Speed Capabilities */ |
| #define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */ |
| #define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */ |
| #define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */ |
| #define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */ |
| #define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */ |
| |
| /* Link Speed Parameter */ |
| #define SK_LSPEED_AUTO 1 /* Automatic resolution */ |
| #define SK_LSPEED_10MBPS 2 /* 10 Mbps */ |
| #define SK_LSPEED_100MBPS 3 /* 100 Mbps */ |
| #define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */ |
| #define SK_LSPEED_INDETERMINATED 5 /* indeterminated */ |
| |
| /* Link Speed Current State */ |
| #define SK_LSPEED_STAT_UNKNOWN 1 |
| #define SK_LSPEED_STAT_10MBPS 2 |
| #define SK_LSPEED_STAT_100MBPS 3 |
| #define SK_LSPEED_STAT_1000MBPS 4 |
| #define SK_LSPEED_STAT_INDETERMINATED 5 |
| |
| |
| /* Link Capability Parameter */ |
| #define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */ |
| #define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */ |
| #define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */ |
| #define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */ |
| #define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */ |
| |
| /* Link Mode Current State */ |
| #define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */ |
| #define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */ |
| #define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */ |
| #define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */ |
| #define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */ |
| #define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */ |
| |
| /* Flow Control Mode Parameter (and capabilities) */ |
| #define SK_FLOW_MODE_NONE 1 /* No Flow-Control */ |
| #define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */ |
| #define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */ |
| #define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or |
| * just the remote station may send PAUSE |
| */ |
| #define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */ |
| |
| /* Flow Control Status Parameter */ |
| #define SK_FLOW_STAT_NONE 1 /* No Flow Control */ |
| #define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */ |
| #define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */ |
| #define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */ |
| #define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */ |
| |
| /* Master/Slave Mode Capabilities */ |
| #define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */ |
| #define SK_MS_CAP_MASTER (1<<1) /* This station is master */ |
| #define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */ |
| #define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */ |
| |
| /* Set Master/Slave Mode Parameter (and capabilities) */ |
| #define SK_MS_MODE_AUTO 1 /* Automatic resolution */ |
| #define SK_MS_MODE_MASTER 2 /* This station is master */ |
| #define SK_MS_MODE_SLAVE 3 /* This station is slave */ |
| #define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */ |
| |
| /* Master/Slave Status Parameter */ |
| #define SK_MS_STAT_UNSET 1 /* The M/S status is not set */ |
| #define SK_MS_STAT_MASTER 2 /* This station is Master */ |
| #define SK_MS_STAT_SLAVE 3 /* This station is Dlave */ |
| #define SK_MS_STAT_FAULT 4 /* M/S resolution failed */ |
| #define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */ |
| |
| /* parameter 'Mode' when calling SkXmSetRxCmd() */ |
| #define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */ |
| #define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */ |
| #define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */ |
| #define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */ |
| #define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */ |
| #define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */ |
| #define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */ |
| #define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ |
| #define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */ |
| #define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */ |
| |
| /* parameter 'Para' when calling SkMacSetRxTxEn() */ |
| #define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */ |
| #define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */ |
| #define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */ |
| #define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */ |
| #define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */ |
| #define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */ |
| |
| /* States of PState */ |
| #define SK_PRT_RESET 0 /* the port is reset */ |
| #define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */ |
| #define SK_PRT_INIT 2 /* the port is initialized */ |
| #define SK_PRT_RUN 3 /* the port has an active link */ |
| |
| /* Default receive frame limit for Workaround of XMAC Errata */ |
| #define SK_DEF_RX_WA_LIM SK_CONSTU64(100) |
| |
| /* Link Partner Status */ |
| #define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */ |
| #define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */ |
| #define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */ |
| |
| /* Maximum Restarts before restart is ignored (3Com WA) */ |
| #define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */ |
| |
| /* Max. Auto-neg. timeouts before link detection in sense mode is reset */ |
| #define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */ |
| |
| /* structures *****************************************************************/ |
| |
| /* |
| * MAC specific functions |
| */ |
| typedef struct s_GeMacFunc { |
| int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); |
| int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, |
| SK_U16 StatAddr, SK_U32 *pVal); |
| int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); |
| int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, |
| SK_U16 IStatus, SK_U64 *pVal); |
| } SK_GEMACFUNC; |
| |
| /* |
| * Port Structure |
| */ |
| typedef struct s_GePort { |
| #ifndef SK_DIAG |
| SK_TIMER PWaTimer; /* Workaround Timer */ |
| SK_TIMER HalfDupChkTimer; |
| #endif /* SK_DIAG */ |
| SK_U32 PPrevShorts; /* Previous short Counter checking */ |
| SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */ |
| SK_U64 PPrevRx; /* Previous RxOk Counter checking */ |
| SK_U64 PRxLim; /* Previous RxOk Counter checking */ |
| SK_U64 LastOctets; /* For half duplex hang check */ |
| int PLinkResCt; /* Link Restart Counter */ |
| int PAutoNegTimeOut;/* Auto-negotiation timeout current value */ |
| int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */ |
| int PRxQSize; /* Port Rx Queue Size in kB */ |
| int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */ |
| int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */ |
| SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */ |
| SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */ |
| SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */ |
| SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */ |
| SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */ |
| SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */ |
| SK_U32 PRxOverCnt; /* Receive Overflow Counter */ |
| int PRxQOff; /* Rx Queue Address Offset */ |
| int PXsQOff; /* Synchronous Tx Queue Address Offset */ |
| int PXaQOff; /* Asynchronous Tx Queue Address Offset */ |
| int PhyType; /* PHY used on this port */ |
| SK_U16 PhyId1; /* PHY Id1 on this port */ |
| SK_U16 PhyAddr; /* MDIO/MDC PHY address */ |
| SK_U16 PIsave; /* Saved Interrupt status word */ |
| SK_U16 PSsave; /* Saved PHY status word */ |
| SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */ |
| SK_BOOL PState; /* Is port initialized ? */ |
| SK_BOOL PLinkBroken; /* Is Link broken ? */ |
| SK_BOOL PCheckPar; /* Do we check for parity errors ? */ |
| SK_BOOL HalfDupTimerActive; |
| SK_U8 PLinkCap; /* Link Capabilities */ |
| SK_U8 PLinkModeConf; /* Link Mode configured */ |
| SK_U8 PLinkMode; /* Link Mode currently used */ |
| SK_U8 PLinkModeStatus;/* Link Mode Status */ |
| SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */ |
| SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */ |
| SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */ |
| SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */ |
| SK_U8 PFlowCtrlMode; /* Flow Control Mode */ |
| SK_U8 PFlowCtrlStatus;/* Flow Control Status */ |
| SK_U8 PMSCap; /* Master/Slave Capabilities */ |
| SK_U8 PMSMode; /* Master/Slave Mode */ |
| SK_U8 PMSStatus; /* Master/Slave Status */ |
| SK_U8 PAutoNegFail; /* Auto-negotiation fail flag */ |
| SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */ |
| SK_U8 PCableLen; /* Cable Length */ |
| SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */ |
| SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */ |
| } SK_GEPORT; |
| |
| /* |
| * Gigabit Ethernet Initialization Struct |
| * (has to be included in the adapter context) |
| */ |
| typedef struct s_GeInit { |
| SK_U8 GIPciHwRev; /* PCI HW Revision Number */ |
| SK_U8 GIChipId; /* Chip Identification Number */ |
| SK_U8 GIChipRev; /* Chip Revision Number */ |
| SK_BOOL GIGenesis; /* Genesis adapter ? */ |
| SK_BOOL GICopperType; /* Copper Type adapter ? */ |
| SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */ |
| SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */ |
| SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */ |
| SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */ |
| SK_BOOL GIYukonLite; /* YUKON-Lite chip */ |
| int GIMacsFound; /* Number of MACs found on this adapter */ |
| int GIMacType; /* MAC Type used on this adapter */ |
| int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */ |
| int GIPortUsage; /* Driver Port Usage */ |
| int GILevel; /* Initialization Level completed */ |
| int GIRamSize; /* The RAM size of the adapter in kB */ |
| int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */ |
| SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */ |
| SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */ |
| SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */ |
| SK_GEMACFUNC GIFunc; /* MAC depedent functions */ |
| } SK_GEINIT; |
| |
| /* |
| * Error numbers and messages for skxmac2.c and skgeinit.c |
| */ |
| #define SKERR_HWI_E001 (SK_ERRBASE_HWINIT) |
| #define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters" |
| #define SKERR_HWI_E002 (SKERR_HWI_E001+1) |
| #define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing" |
| #define SKERR_HWI_E003 (SKERR_HWI_E002+1) |
| #define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level" |
| #define SKERR_HWI_E004 (SKERR_HWI_E003+1) |
| #define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured" |
| #define SKERR_HWI_E005 (SKERR_HWI_E004+1) |
| #define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports" |
| #define SKERR_HWI_E006 (SKERR_HWI_E005+1) |
| #define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state" |
| #define SKERR_HWI_E007 (SKERR_HWI_E006+1) |
| #define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode" |
| #define SKERR_HWI_E008 (SKERR_HWI_E007+1) |
| #define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode" |
| #define SKERR_HWI_E009 (SKERR_HWI_E008+1) |
| #define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero" |
| #define SKERR_HWI_E010 (SKERR_HWI_E009+1) |
| #define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters" |
| #define SKERR_HWI_E011 (SKERR_HWI_E010+1) |
| #define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small" |
| #define SKERR_HWI_E012 (SKERR_HWI_E011+1) |
| #define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified" |
| #define SKERR_HWI_E013 (SKERR_HWI_E012+1) |
| #define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue" |
| #define SKERR_HWI_E014 (SKERR_HWI_E013+1) |
| #define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified" |
| #define SKERR_HWI_E015 (SKERR_HWI_E014+1) |
| #define SKERR_HWI_E015MSG "Illegal Link mode parameter" |
| #define SKERR_HWI_E016 (SKERR_HWI_E015+1) |
| #define SKERR_HWI_E016MSG "Illegal Flow control mode parameter" |
| #define SKERR_HWI_E017 (SKERR_HWI_E016+1) |
| #define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal" |
| #define SKERR_HWI_E018 (SKERR_HWI_E017+1) |
| #define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)" |
| #define SKERR_HWI_E019 (SKERR_HWI_E018+1) |
| #define SKERR_HWI_E019MSG "Illegal Speed parameter" |
| #define SKERR_HWI_E020 (SKERR_HWI_E019+1) |
| #define SKERR_HWI_E020MSG "Illegal Master/Slave parameter" |
| #define SKERR_HWI_E021 (SKERR_HWI_E020+1) |
| #define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter" |
| #define SKERR_HWI_E022 (SKERR_HWI_E021+1) |
| #define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address" |
| #define SKERR_HWI_E023 (SKERR_HWI_E022+1) |
| #define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small" |
| #define SKERR_HWI_E024 (SKERR_HWI_E023+1) |
| #define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)" |
| #define SKERR_HWI_E025 (SKERR_HWI_E024+1) |
| #define SKERR_HWI_E025MSG "" |
| |
| /* function prototypes ********************************************************/ |
| |
| #ifndef SK_KR_PROTO |
| |
| /* |
| * public functions in skgeinit.c |
| */ |
| extern void SkGePollRxD( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL PollRxD); |
| |
| extern void SkGePollTxD( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL PollTxD); |
| |
| extern void SkGeYellowLED( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int State); |
| |
| extern int SkGeCfgSync( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U32 IntTime, |
| SK_U32 LimCount, |
| int SyncMode); |
| |
| extern void SkGeLoadLnkSyncCnt( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U32 CntVal); |
| |
| extern void SkGeStopPort( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Dir, |
| int RstMode); |
| |
| extern int SkGeInit( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Level); |
| |
| extern void SkGeDeInit( |
| SK_AC *pAC, |
| SK_IOC IoC); |
| |
| extern int SkGeInitPort( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkGeXmitLED( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Led, |
| int Mode); |
| |
| extern void SkGeInitRamIface( |
| SK_AC *pAC, |
| SK_IOC IoC); |
| |
| extern int SkGeInitAssignRamToQueues( |
| SK_AC *pAC, |
| int ActivePort, |
| SK_BOOL DualNet); |
| |
| /* |
| * public functions in skxmac2.c |
| */ |
| extern void SkMacRxTxDisable( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacSoftRst( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacHardRst( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkXmInitMac( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkGmInitMac( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacInitPhy( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL DoLoop); |
| |
| extern void SkMacIrqDisable( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacFlushTxFifo( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacFlushRxFifo( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacIrq( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern int SkMacAutoNegDone( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacAutoNegLipaPhy( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U16 IStatus); |
| |
| extern void SkMacSetRxTxEn( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Para); |
| |
| extern int SkMacRxTxEnable( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacPromiscMode( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| |
| extern void SkMacHashing( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| |
| extern void SkXmPhyRead( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 *pVal); |
| |
| extern void SkXmPhyWrite( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 Val); |
| |
| extern void SkGmPhyRead( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 *pVal); |
| |
| extern void SkGmPhyWrite( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 Val); |
| |
| extern void SkGePhyRead( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 *pVal); |
| |
| extern void SkGePhyWrite( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 Val); |
| |
| extern void SkXmClrExactAddr( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int StartNum, |
| int StopNum); |
| |
| extern void SkXmInitDupMd( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkXmInitPauseMd( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkXmAutoNegLipaXmac( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U16 IStatus); |
| |
| extern int SkXmUpdateStats( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkGmUpdateStats( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkXmMacStatistic( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 StatAddr, |
| SK_U32 *pVal); |
| |
| extern int SkGmMacStatistic( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 StatAddr, |
| SK_U32 *pVal); |
| |
| extern int SkXmResetCounter( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkGmResetCounter( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkXmOverflowStatus( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 IStatus, |
| SK_U64 *pStatus); |
| |
| extern int SkGmOverflowStatus( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 MacStatus, |
| SK_U64 *pStatus); |
| |
| extern int SkGmCableDiagStatus( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL StartTest); |
| |
| #ifdef SK_DIAG |
| extern void SkMacSetRxCmd( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Mode); |
| extern void SkMacCrcGener( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| extern void SkMacTimeStamp( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| extern void SkXmSendCont( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| #endif /* SK_DIAG */ |
| |
| #else /* SK_KR_PROTO */ |
| |
| /* |
| * public functions in skgeinit.c |
| */ |
| extern void SkGePollRxD(); |
| extern void SkGePollTxD(); |
| extern void SkGeYellowLED(); |
| extern int SkGeCfgSync(); |
| extern void SkGeLoadLnkSyncCnt(); |
| extern void SkGeStopPort(); |
| extern int SkGeInit(); |
| extern void SkGeDeInit(); |
| extern int SkGeInitPort(); |
| extern void SkGeXmitLED(); |
| extern void SkGeInitRamIface(); |
| extern int SkGeInitAssignRamToQueues(); |
| |
| /* |
| * public functions in skxmac2.c |
| */ |
| extern void SkMacRxTxDisable(); |
| extern void SkMacSoftRst(); |
| extern void SkMacHardRst(); |
| extern void SkMacInitPhy(); |
| extern int SkMacRxTxEnable(); |
| extern void SkMacPromiscMode(); |
| extern void SkMacHashing(); |
| extern void SkMacIrqDisable(); |
| extern void SkMacFlushTxFifo(); |
| extern void SkMacFlushRxFifo(); |
| extern void SkMacIrq(); |
| extern int SkMacAutoNegDone(); |
| extern void SkMacAutoNegLipaPhy(); |
| extern void SkMacSetRxTxEn(); |
| extern void SkGePhyRead(); |
| extern void SkGePhyWrite(); |
| extern void SkXmInitMac(); |
| extern void SkXmPhyRead(); |
| extern void SkXmPhyWrite(); |
| extern void SkGmInitMac(); |
| extern void SkGmPhyRead(); |
| extern void SkGmPhyWrite(); |
| extern void SkXmClrExactAddr(); |
| extern void SkXmInitDupMd(); |
| extern void SkXmInitPauseMd(); |
| extern void SkXmAutoNegLipaXmac(); |
| extern int SkXmUpdateStats(); |
| extern int SkGmUpdateStats(); |
| extern int SkXmMacStatistic(); |
| extern int SkGmMacStatistic(); |
| extern int SkXmResetCounter(); |
| extern int SkGmResetCounter(); |
| extern int SkXmOverflowStatus(); |
| extern int SkGmOverflowStatus(); |
| extern int SkGmCableDiagStatus(); |
| |
| #ifdef SK_DIAG |
| extern void SkMacSetRxCmd(); |
| extern void SkMacCrcGener(); |
| extern void SkMacTimeStamp(); |
| extern void SkXmSendCont(); |
| #endif /* SK_DIAG */ |
| |
| #endif /* SK_KR_PROTO */ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* __INC_SKGEINIT_H_ */ |
