board/mpc8540ads/mpc8540ads.c - uboot/windcharger - Git at Google

  /*
  * Copyright 2004 Freescale Semiconductor.
  * (C) Copyright 2002,2003, Motorola Inc.
  * Xianghua Xiao, (X.Xiao@motorola.com)
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */


 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
 #include <spd.h>

 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif

 extern long int spd_sdram(void);

 void local_bus_init(void);
 void sdram_init(void);
 long int fixed_sdram(void);


 int board_early_init_f (void)
 {
     return 0;
 }

 int checkboard (void)
 {
 	puts("Board: ADS\n");

 #ifdef CONFIG_PCI
 	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
 	       CONFIG_SYS_CLK_FREQ / 1000000);
 #else
 	printf("    PCI1: disabled\n");
 #endif

 	/*
 	 * Initialize local bus.
 	 */
 	local_bus_init();

 	return 0;
 }


 long int
 initdram(int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;

 	puts("Initializing\n");

 #if defined(CONFIG_DDR_DLL)
 	{
 	    volatile ccsr_gur_t *gur= &immap->im_gur;
 	    uint temp_ddrdll = 0;

 	    /*
 	     * Work around to stabilize DDR DLL
 	     */
 	    temp_ddrdll = gur->ddrdllcr;
 	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
 	    asm("sync;isync;msync");
 	}
 #endif

 #if defined(CONFIG_SPD_EEPROM)
 	dram_size = spd_sdram ();
 #else
 	dram_size = fixed_sdram ();
 #endif

 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	/*
 	 * Initialize and enable DDR ECC.
 	 */
 	ddr_enable_ecc(dram_size);
 #endif

 	/*
 	 * Initialize SDRAM.
 	 */
 	sdram_init();

 	puts("    DDR: ");
 	return dram_size;
 }


 /*
  * Initialize Local Bus
  */

 void
 local_bus_init(void)
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	volatile ccsr_lbc_t *lbc = &immap->im_lbc;

 	uint clkdiv;
 	uint lbc_hz;
 	sys_info_t sysinfo;

 	/*
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
 	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
 	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */

 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & 0x0f;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;

 	if (lbc_hz < 66) {
 		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */

 	} else if (lbc_hz >= 133) {
 		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */

 	} else {
 		/*
 		 * On REV1 boards, need to change CLKDIV before enable DLL.
 		 * Default CLKDIV is 8, change it to 4 temporarily.
 		 */
 		uint pvr = get_pvr();
 		uint temp_lbcdll = 0;

 		if (pvr == PVR_85xx_REV1) {
 			/* FIXME: Justify the high bit here. */
 			lbc->lcrr = 0x10000004;
 		}

 		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 		udelay(200);

 		/*
 		 * Sample LBC DLL ctrl reg, upshift it to set the
 		 * override bits.
 		 */
 		temp_lbcdll = gur->lbcdllcr;
 		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
 		asm("sync;isync;msync");
 	}
 }


 /*
  * Initialize SDRAM memory on the Local Bus.
  */

 void
 sdram_init(void)
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;

 	puts("    SDRAM: ");
 	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");

 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
 	lbc->or2 = CFG_OR2_PRELIM;
 	lbc->br2 = CFG_BR2_PRELIM;
 	lbc->lbcr = CFG_LBC_LBCR;
 	asm("msync");

 	lbc->lsrt = CFG_LBC_LSRT;
 	lbc->mrtpr = CFG_LBC_MRTPR;
 	asm("sync");

 	/*
 	 * Configure the SDRAM controller.
 	 */
 	lbc->lsdmr = CFG_LBC_LSDMR_1;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);

 	lbc->lsdmr = CFG_LBC_LSDMR_2;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);

 	lbc->lsdmr = CFG_LBC_LSDMR_3;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);

 	lbc->lsdmr = CFG_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);

 	lbc->lsdmr = CFG_LBC_LSDMR_5;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 }


 #if defined(CFG_DRAM_TEST)
 int testdram (void)
 {
 	uint *pstart = (uint *) CFG_MEMTEST_START;
 	uint *pend = (uint *) CFG_MEMTEST_END;
 	uint *p;

 	printf("SDRAM test phase 1:\n");
 	for (p = pstart; p < pend; p++)
 		*p = 0xaaaaaaaa;

 	for (p = pstart; p < pend; p++) {
 		if (*p != 0xaaaaaaaa) {
 			printf ("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}

 	printf("SDRAM test phase 2:\n");
 	for (p = pstart; p < pend; p++)
 		*p = 0x55555555;

 	for (p = pstart; p < pend; p++) {
 		if (*p != 0x55555555) {
 			printf ("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}

 	printf("SDRAM test passed.\n");
 	return 0;
 }
 #endif


 #if !defined(CONFIG_SPD_EEPROM)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
 long int fixed_sdram (void)
 {
   #ifndef CFG_RAMBOOT
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_ddr_t *ddr= &immap->im_ddr;

 	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
 	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
 	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
 	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
 	ddr->sdram_mode = CFG_DDR_MODE;
 	ddr->sdram_interval = CFG_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
     #endif
 	asm("sync;isync;msync");
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
 	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
     #else
 	ddr->sdram_cfg = CFG_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
 	return CFG_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */


 #if defined(CONFIG_PCI)
 /*
  * Initialize PCI Devices, report devices found.
  */

 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc85xxads_config_table[] = {
     { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
       PCI_IDSEL_NUMBER, PCI_ANY_ID,
       pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
 				   PCI_ENET0_MEMADDR,
 				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
       } },
     { }
 };
 #endif


 static struct pci_controller hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table: pci_mpc85xxads_config_table,
 #endif
 };

 #endif	/* CONFIG_PCI */


 void
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
 	extern void pci_mpc85xx_init(struct pci_controller *hose);

 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
	/*
	* Copyright 2004 Freescale Semiconductor.
	* (C) Copyright 2002,2003, Motorola Inc.
	* Xianghua Xiao, (X.Xiao@motorola.com)
	*
	* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/


	#include <common.h>
	#include <pci.h>
	#include <asm/processor.h>
	#include <asm/immap_85xx.h>
	#include <spd.h>

	#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	extern void ddr_enable_ecc(unsigned int dram_size);
	#endif

	extern long int spd_sdram(void);

	void local_bus_init(void);
	void sdram_init(void);
	long int fixed_sdram(void);


	int board_early_init_f (void)
	{
	return 0;
	}

	int checkboard (void)
	{
	puts("Board: ADS\n");

	#ifdef CONFIG_PCI
	printf(" PCI1: 32 bit, %d MHz (compiled)\n",
	CONFIG_SYS_CLK_FREQ / 1000000);
	#else
	printf(" PCI1: disabled\n");
	#endif

	/*
	* Initialize local bus.
	*/
	local_bus_init();

	return 0;
	}


	long int
	initdram(int board_type)
	{
	long dram_size = 0;
	extern long spd_sdram (void);
	volatile immap_t immap = (immap_t )CFG_IMMR;

	puts("Initializing\n");

	#if defined(CONFIG_DDR_DLL)
	{
	volatile ccsr_gur_t *gur= &immap->im_gur;
	uint temp_ddrdll = 0;

	/*
	* Work around to stabilize DDR DLL
	*/
	temp_ddrdll = gur->ddrdllcr;
	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) \| 0x80000000;
	asm("sync;isync;msync");
	}
	#endif

	#if defined(CONFIG_SPD_EEPROM)
	dram_size = spd_sdram ();
	#else
	dram_size = fixed_sdram ();
	#endif

	#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	/*
	* Initialize and enable DDR ECC.
	*/
	ddr_enable_ecc(dram_size);
	#endif

	/*
	* Initialize SDRAM.
	*/
	sdram_init();

	puts(" DDR: ");
	return dram_size;
	}


	/*
	* Initialize Local Bus
	*/

	void
	local_bus_init(void)
	{
	volatile immap_t immap = (immap_t )CFG_IMMR;
	volatile ccsr_gur_t *gur = &immap->im_gur;
	volatile ccsr_lbc_t *lbc = &immap->im_lbc;

	uint clkdiv;
	uint lbc_hz;
	sys_info_t sysinfo;

	/*
	* Errata LBC11.
	* Fix Local Bus clock glitch when DLL is enabled.
	*
	* If localbus freq is < 66Mhz, DLL bypass mode must be used.
	* If localbus freq is > 133Mhz, DLL can be safely enabled.
	* Between 66 and 133, the DLL is enabled with an override workaround.
	*/

	get_sys_info(&sysinfo);
	clkdiv = lbc->lcrr & 0x0f;
	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;

	if (lbc_hz < 66) {
	lbc->lcrr = CFG_LBC_LCRR \| 0x80000000; /* DLL Bypass */

	} else if (lbc_hz >= 133) {
	lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */

	} else {
	/*
	* On REV1 boards, need to change CLKDIV before enable DLL.
	* Default CLKDIV is 8, change it to 4 temporarily.
	*/
	uint pvr = get_pvr();
	uint temp_lbcdll = 0;

	if (pvr == PVR_85xx_REV1) {
	/* FIXME: Justify the high bit here. */
	lbc->lcrr = 0x10000004;
	}

	lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
	udelay(200);

	/*
	* Sample LBC DLL ctrl reg, upshift it to set the
	* override bits.
	*/
	temp_lbcdll = gur->lbcdllcr;
	gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) \| 0x80000000);
	asm("sync;isync;msync");
	}
	}


	/*
	* Initialize SDRAM memory on the Local Bus.
	*/

	void
	sdram_init(void)
	{
	volatile immap_t immap = (immap_t )CFG_IMMR;
	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
	uint sdram_addr = (uint )CFG_LBC_SDRAM_BASE;

	puts(" SDRAM: ");
	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");

	/*
	* Setup SDRAM Base and Option Registers
	*/
	lbc->or2 = CFG_OR2_PRELIM;
	lbc->br2 = CFG_BR2_PRELIM;
	lbc->lbcr = CFG_LBC_LBCR;
	asm("msync");

	lbc->lsrt = CFG_LBC_LSRT;
	lbc->mrtpr = CFG_LBC_MRTPR;
	asm("sync");

	/*
	* Configure the SDRAM controller.
	*/
	lbc->lsdmr = CFG_LBC_LSDMR_1;
	asm("sync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	lbc->lsdmr = CFG_LBC_LSDMR_2;
	asm("sync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	lbc->lsdmr = CFG_LBC_LSDMR_3;
	asm("sync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	lbc->lsdmr = CFG_LBC_LSDMR_4;
	asm("sync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	lbc->lsdmr = CFG_LBC_LSDMR_5;
	asm("sync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);
	}


	#if defined(CFG_DRAM_TEST)
	int testdram (void)
	{
	uint pstart = (uint ) CFG_MEMTEST_START;
	uint pend = (uint ) CFG_MEMTEST_END;
	uint *p;

	printf("SDRAM test phase 1:\n");
	for (p = pstart; p < pend; p++)
	*p = 0xaaaaaaaa;

	for (p = pstart; p < pend; p++) {
	if (*p != 0xaaaaaaaa) {
	printf ("SDRAM test fails at: %08x\n", (uint) p);
	return 1;
	}
	}

	printf("SDRAM test phase 2:\n");
	for (p = pstart; p < pend; p++)
	*p = 0x55555555;

	for (p = pstart; p < pend; p++) {
	if (*p != 0x55555555) {
	printf ("SDRAM test fails at: %08x\n", (uint) p);
	return 1;
	}
	}

	printf("SDRAM test passed.\n");
	return 0;
	}
	#endif


	#if !defined(CONFIG_SPD_EEPROM)
	/*************************************************************************
	* fixed sdram init -- doesn't use serial presence detect.
	************************************************************************/
	long int fixed_sdram (void)
	{
	#ifndef CFG_RAMBOOT
	volatile immap_t immap = (immap_t )CFG_IMMR;
	volatile ccsr_ddr_t *ddr= &immap->im_ddr;

	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
	ddr->sdram_mode = CFG_DDR_MODE;
	ddr->sdram_interval = CFG_DDR_INTERVAL;
	#if defined (CONFIG_DDR_ECC)
	ddr->err_disable = 0x0000000D;
	ddr->err_sbe = 0x00ff0000;
	#endif
	asm("sync;isync;msync");
	udelay(500);
	#if defined (CONFIG_DDR_ECC)
	/* Enable ECC checking */
	ddr->sdram_cfg = (CFG_DDR_CONTROL \| 0x20000000);
	#else
	ddr->sdram_cfg = CFG_DDR_CONTROL;
	#endif
	asm("sync; isync; msync");
	udelay(500);
	#endif
	return CFG_SDRAM_SIZE * 1024 * 1024;
	}
	#endif /* !defined(CONFIG_SPD_EEPROM) */


	#if defined(CONFIG_PCI)
	/*
	* Initialize PCI Devices, report devices found.
	*/

	#ifndef CONFIG_PCI_PNP
	static struct pci_config_table pci_mpc85xxads_config_table[] = {
	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
	PCI_IDSEL_NUMBER, PCI_ANY_ID,
	pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
	PCI_ENET0_MEMADDR,
	PCI_COMMAND_MEMORY \| PCI_COMMAND_MASTER
	} },
	{ }
	};
	#endif


	static struct pci_controller hose = {
	#ifndef CONFIG_PCI_PNP
	config_table: pci_mpc85xxads_config_table,
	#endif
	};

	#endif /* CONFIG_PCI */


	void
	pci_init_board(void)
	{
	#ifdef CONFIG_PCI
	extern void pci_mpc85xx_init(struct pci_controller *hose);

	pci_mpc85xx_init(&hose);
	#endif /* CONFIG_PCI */
	}