blob: 7730be343794ee693a7bce0526cd625b0805cfe1 [file] [log] [blame]
* Memory Setup stuff - taken from blob memsetup.S
* Copyright (C) 1999 2000 2001 Erik Mouw ( and
* Jan-Derk Bakker (
* See file CREDITS for list of people who contributed to this
* project.
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
#include "config.h"
#include "version.h"
/* some parameters for the board */
MEM_BASE: .long 0xa0000000
MEM_START: .long 0xc0000000
#define MDCNFG 0x00
#define MDCAS00 0x04 /* CAS waveform rotate reg 0 */
#define MDCAS01 0x08 /* CAS waveform rotate reg 1 bank */
#define MDCAS02 0x0C /* CAS waveform rotate reg 2 bank */
#define MDREFR 0x1C /* DRAM refresh control reg */
#define MDCAS20 0x20 /* CAS waveform rotate reg 0 bank */
#define MDCAS21 0x24 /* CAS waveform rotate reg 1 bank */
#define MDCAS22 0x28 /* CAS waveform rotate reg 2 bank */
#define MECR 0x18 /* Expansion memory (PCMCIA) bus configuration register */
#define MSC0 0x10 /* static memory control reg 0 */
#define MSC1 0x14 /* static memory control reg 1 */
#define MSC2 0x2C /* static memory control reg 2 */
#define SMCNFG 0x30 /* SMROM configuration reg */
mdcas00: .long 0x5555557F
mdcas01: .long 0x55555555
mdcas02: .long 0x55555555
mdcas20: .long 0x5555557F
mdcas21: .long 0x55555555
mdcas22: .long 0x55555555
mdcnfg: .long 0x0000B25C
mdrefr: .long 0x007000C1
mecr: .long 0x10841084
msc0: .long 0x00004774
msc1: .long 0x00000000
msc2: .long 0x00000000
smcnfg: .long 0x00000000
/* setting up the memory */
.globl lowlevel_init
ldr r0, MEM_BASE
/* Set up the DRAM */
/* MDCAS00 */
ldr r1, mdcas00
str r1, [r0, #MDCAS00]
/* MDCAS01 */
ldr r1, mdcas01
str r1, [r0, #MDCAS01]
/* MDCAS02 */
ldr r1, mdcas02
str r1, [r0, #MDCAS02]
/* MDCAS20 */
ldr r1, mdcas20
str r1, [r0, #MDCAS20]
/* MDCAS21 */
ldr r1, mdcas21
str r1, [r0, #MDCAS21]
/* MDCAS22 */
ldr r1, mdcas22
str r1, [r0, #MDCAS22]
/* MDREFR */
ldr r1, mdrefr
str r1, [r0, #MDREFR]
/* Set up PCMCIA space */
ldr r1, mecr
str r1, [r0, #MECR]
/* Setup the flash memory and other */
ldr r1, msc0
str r1, [r0, #MSC0]
ldr r1, msc1
str r1, [r0, #MSC1]
ldr r1, msc2
str r1, [r0, #MSC2]
ldr r1, smcnfg
str r1, [r0, #SMCNFG]
/* MDCNFG */
ldr r1, mdcnfg
bic r1, r1, #0x00000001
str r1, [r0, #MDCNFG]
/* Load something to activate bank */
ldr r2, MEM_START
.rept 8
ldr r1, [r2]
/* MDCNFG */
ldr r1, mdcnfg
orr r1, r1, #0x00000001
str r1, [r0, #MDCNFG]
/* everything is fine now */
mov pc, lr