blob: 60cfa95af3c0d7667fff8316108aa57e33e8acc5 [file] [log] [blame]
Freescale MCF53017EVB ColdFire Development Board
================================================
TsiChung Liew(Tsi-Chung.Liew@freescale.com)
Created 10/22/08
===========================================
Changed files:
==============
- board/freescale/m53017evb/m53017evb.c Dram setup
- board/freescale/m53017evb/mii.c Mii access
- board/freescale/m53017evb/Makefile Makefile
- board/freescale/m53017evb/config.mk config make
- board/freescale/m53017evb/u-boot.lds Linker description
- cpu/mcf532x/cpu.c cpu specific code
- cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
- cpu/mcf532x/interrupts.c cpu specific interrupt support
- cpu/mcf532x/speed.c system, flexbus, and cpu clock
- cpu/mcf532x/Makefile Makefile
- cpu/mcf532x/config.mk config make
- cpu/mcf532x/start.S start up assembly code
- doc/README.m53017evb This readme file
- drivers/net/mcffec.c ColdFire common FEC driver
- drivers/net/mcfmii.c ColdFire common Mii driver
- drivers/serial/mcfuart.c ColdFire common UART driver
- drivers/rtc/mcfrtc.c Realtime clock Driver
- include/asm-m68k/bitops.h Bit operation function export
- include/asm-m68k/byteorder.h Byte order functions
- include/asm-m68k/fec.h FEC structure and definition
- include/asm-m68k/fsl_i2c.h I2C structure and definition
- include/asm-m68k/global_data.h Global data structure
- include/asm-m68k/immap.h ColdFire specific header file and driver macros
- include/asm-m68k/immap_5301x.h mcf5301x specific header file
- include/asm-m68k/io.h io functions
- include/asm-m68k/m532x.h mcf5301x specific header file
- include/asm-m68k/posix_types.h Posix
- include/asm-m68k/processor.h header file
- include/asm-m68k/ptrace.h Exception structure
- include/asm-m68k/rtc.h Realtime clock header file
- include/asm-m68k/string.h String function export
- include/asm-m68k/timer.h Timer structure and definition
- include/asm-m68k/types.h Data types definition
- include/asm-m68k/uart.h Uart structure and definition
- include/asm-m68k/u-boot.h u-boot structure
- include/configs/M53017EVB.h Board specific configuration file
- lib_m68k/board.c board init function
- lib_m68k/cache.c
- lib_m68k/interrupts Coldfire common interrupt functions
- lib_m68k/m68k_linux.c
- lib_m68k/time.c Timer functions (Dma timer and PIT)
- lib_m68k/traps.c Exception init code
1 MCF5301x specific Options/Settings
====================================
1.1 pre-loader is no longer suppoer in thie coldfire family
1.2 Configuration settings for M53017EVB Development Board
CONFIG_MCF5301x -- define for all MCF5301x CPUs
CONFIG_M53015 -- define for MCF53015 CPUs
CONFIG_M53017EVB -- define for M53017EVB board
CONFIG_MCFUART -- define to use common CF Uart driver
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
CONFIG_BAUDRATE -- define UART baudrate
CONFIG_MCFRTC -- define to use common CF RTC driver
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
RTC_DEBUG -- define to show RTC debug message
CONFIG_CMD_DATE -- enable to use date feature in u-boot
CONFIG_MCFFEC -- define to use common CF FEC driver
CONFIG_NET_MULTI -- define to use multi FEC in u-boot
CONFIG_MII -- enable to use MII driver
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
CONFIG_SYS_FAULT_ECHO_LINK_DOWN --
CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
MCFFEC_TOUT_LOOP -- set FEC timeout loop
CONFIG_MCFTMR -- define to use DMA timer
CONFIG_MCFPIT -- define to use PIT timer
CONFIG_FSL_I2C -- define to use FSL common I2C driver
CONFIG_HARD_I2C -- define for I2C hardware support
CONFIG_SOFT_I2C -- define for I2C bit-banged
CONFIG_SYS_I2C_SPEED -- define for I2C speed
CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
CONFIG_SYS_IMMR -- define for MBAR offset
CONFIG_SYS_MBAR -- define MBAR offset
CONFIG_MONITOR_IS_IN_RAM -- Not support
CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================
2.1. System memory map:
Flash: 0x00000000-0x3FFFFFFF (1024MB)
DDR: 0x40000000-0x7FFFFFFF (1024MB)
SRAM: 0x80000000-0x8FFFFFFF (256MB)
IP: 0xFC000000-0xFFFFFFFF (256MB)
2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
linux kernel, you can customize it based on your system requirements:
Flash0: 0x00000000-0x00FFFFFF (16MB)
DDR: 0x40000000-0x4FFFFFFF (256MB)
SRAM: 0x80000000-0x80007FFF (32KB)
IP: 0xFC000000-0xFC0FFFFF (64KB)
3. COMPILATION
==============
3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
uClinux version) from codesourcery.com was used. Download it from:
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
3.2 Compilation
export CROSS_COMPILE=cross-compile-prefix
cd u-boot
make distclean
make M53017EVB_config
make
4. SCREEN DUMP
==============
4.1 M53017EVB Development board
(NOTE: May not show exactly the same)
U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
CPU: Freescale MCF53015 (Mask:76 Version:0)
CPU CLK 240 Mhz BUS CLK 80 Mhz
Board: Freescale M53017EVB
I2C: ready
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
NAND: 16 MiB
Net: FEC0, FEC1
-> print
bootdelay=1
baudrate=115200
ethaddr=00:e0:0c:bc:e5:60
hostname=M53017EVB
netdev=eth0
loadaddr=40010000
u-boot=u-boot.bin
load=tftp ${loadaddr) ${u-boot}
upd=run load; run prog
prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
gatewayip=192.168.1.1
netmask=255.255.255.0
ipaddr=192.168.1.3
serverip=192.168.1.2
stdin=serial
stdout=serial
stderr=serial
mem=65024k
Environment size: 437/4092 bytes
->