blob: 061901e9725a2d7f6d9f000a2522e59f84195658 [file] [log] [blame]
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <devices.h>
#include <timestamp.h>
#include <version.h>
#include <net.h>
#include <environment.h>
#include <nand.h>
#include <onenand_uboot.h>
#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
defined(CONFIG_ENV_IS_IN_NVRAM)
#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
#else
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
#undef DEBUG
extern int timer_init(void);
extern int incaip_set_cpuclk(void);
extern ulong uboot_end_data;
extern ulong uboot_end;
ulong monitor_flash_len;
const char version_string[] =
U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")";
static char *failed = "*** failed ***\n";
/*
* Begin and End of memory area for malloc(), and current "brk"
*/
static ulong mem_malloc_start;
static ulong mem_malloc_end;
static ulong mem_malloc_brk;
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
*/
unsigned long mips_io_port_base = -1;
int __board_early_init_f(void)
{
/*
* Nothing to do in this dummy implementation
*/
return 0;
}
int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f")));
/*
* The Malloc area is immediately below the monitor copy in DRAM
*/
static void mem_malloc_init (void)
{
ulong dest_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
mem_malloc_end = dest_addr;
mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
mem_malloc_brk = mem_malloc_start;
memset ((void *) mem_malloc_start,
0,
mem_malloc_end - mem_malloc_start);
}
void *sbrk (ptrdiff_t increment)
{
ulong old = mem_malloc_brk;
ulong new = old + increment;
if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
return (NULL);
}
mem_malloc_brk = new;
return ((void *) old);
}
static int init_func_ram (void)
{
#ifdef CONFIG_BOARD_TYPES
int board_type = gd->board_type;
#else
int board_type = 0; /* use dummy arg */
#endif
puts ("DRAM: ");
if ((gd->ram_size = initdram (board_type)) > 0) {
print_size (gd->ram_size, "\n");
return (0);
}
puts (failed);
return (1);
}
static int display_banner(void)
{
printf ("\n\n%s\n\n", version_string);
return (0);
}
#ifndef CONFIG_SYS_NO_FLASH
static void display_flash_config(ulong size)
{
puts ("Flash: ");
print_size (size, "\n");
}
#endif
static int init_baudrate (void)
{
char tmp[64]; /* long enough for environment variables */
int i = getenv_r ("baudrate", tmp, sizeof (tmp));
gd->baudrate = (i > 0)
? (int) simple_strtoul (tmp, NULL, 10)
: CONFIG_BAUDRATE;
return (0);
}
/*
* Breath some life into the board...
*
* The first part of initialization is running from Flash memory;
* its main purpose is to initialize the RAM so that we
* can relocate the monitor code to RAM.
*/
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
* requirements are just _too_ different. To get rid of the resulting
* mess of board dependend #ifdef'ed code we now make the whole
* initialization sequence configurable to the user.
*
* The requirements for any new initalization function is simple: it
* receives a pointer to the "global data" structure as it's only
* argument, and returns an integer return code, where 0 means
* "continue" and != 0 means "fatal error, hang the system".
*/
typedef int (init_fnc_t) (void);
init_fnc_t *init_sequence[] = {
board_early_init_f,
timer_init,
env_init, /* initialize environment */
#ifdef CONFIG_INCA_IP
incaip_set_cpuclk, /* set cpu clock according to environment variable */
#endif
init_baudrate, /* initialze baudrate settings */
serial_init, /* serial communications setup */
console_init_f,
display_banner, /* say that we are here */
checkboard,
init_func_ram,
NULL,
};
void board_init_f(ulong bootflag)
{
gd_t gd_data, *id;
bd_t *bd;
init_fnc_t **init_fnc_ptr;
ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE;
ulong *s;
#ifdef CONFIG_PURPLE
void copy_code (ulong);
#endif
/* Pointer is writable since we allocated a register for it.
*/
gd = &gd_data;
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
memset ((void *)gd, 0, sizeof (gd_t));
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr)() != 0) {
hang ();
}
}
/*
* Now that we have DRAM mapped and working, we can
* relocate the code and continue running from DRAM.
*/
addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
/* We can reserve some RAM "on top" here.
*/
/* round down to next 4 kB limit.
*/
addr &= ~(4096 - 1);
debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
/* Reserve memory for U-Boot code, data & bss
* round down to next 16 kB limit
*/
addr -= len;
addr &= ~(16 * 1024 - 1);
debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
/* Reserve memory for malloc() arena.
*/
addr_sp = addr - TOTAL_MALLOC_LEN;
debug ("Reserving %dk for malloc() at: %08lx\n",
TOTAL_MALLOC_LEN >> 10, addr_sp);
/*
* (permanently) allocate a Board Info struct
* and a permanent copy of the "global" data
*/
addr_sp -= sizeof(bd_t);
bd = (bd_t *)addr_sp;
gd->bd = bd;
debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof(bd_t), addr_sp);
addr_sp -= sizeof(gd_t);
id = (gd_t *)addr_sp;
debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/* Reserve memory for boot params.
*/
addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
bd->bi_boot_params = addr_sp;
debug ("Reserving %dk for boot params() at: %08lx\n",
CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
/*
* Finally, we set up a new (bigger) stack.
*
* Leave some safety gap for SP, force alignment on 16 byte boundary
* Clear initial stack frame
*/
addr_sp -= 16;
addr_sp &= ~0xF;
s = (ulong *)addr_sp;
*s-- = 0;
*s-- = 0;
addr_sp = (ulong)s;
debug ("Stack Pointer at: %08lx\n", addr_sp);
/*
* Save local variables to board info struct
*/
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
memcpy (id, (void *)gd, sizeof (gd_t));
/* On the purple board we copy the code in a special way
* in order to solve flash problems
*/
#ifdef CONFIG_PURPLE
copy_code(addr);
#endif
relocate_code (addr_sp, id, addr);
/* NOTREACHED - relocate_code() does not return */
}
/************************************************************************
*
* This is the next part if the initialization sequence: we are now
* running from RAM and have a "normal" C environment, i. e. global
* data can be written, BSS has been cleared, the stack size in not
* that critical any more, etc.
*
************************************************************************
*/
void board_init_r (gd_t *id, ulong dest_addr)
{
cmd_tbl_t *cmdtp;
#ifndef CONFIG_SYS_NO_FLASH
ulong size;
#endif
extern void malloc_bin_reloc (void);
#ifndef CONFIG_ENV_IS_NOWHERE
extern char * env_name_spec;
#endif
char *s;
bd_t *bd;
gd = id;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
/*
* We have to relocate the command table manually
*/
for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
ulong addr;
addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
#if 0
printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
cmdtp->name, (ulong) (cmdtp->cmd), addr);
#endif
cmdtp->cmd =
(int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
addr = (ulong)(cmdtp->name) + gd->reloc_off;
cmdtp->name = (char *)addr;
if (cmdtp->usage) {
addr = (ulong)(cmdtp->usage) + gd->reloc_off;
cmdtp->usage = (char *)addr;
}
#ifdef CONFIG_SYS_LONGHELP
if (cmdtp->help) {
addr = (ulong)(cmdtp->help) + gd->reloc_off;
cmdtp->help = (char *)addr;
}
#endif
}
/* there are some other pointer constants we must deal with */
#ifndef CONFIG_ENV_IS_NOWHERE
env_name_spec += gd->reloc_off;
#endif
bd = gd->bd;
#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
size = flash_init();
display_flash_config (size);
bd->bi_flashsize = size;
#endif
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */
#else
bd->bi_flashoffset = 0;
#endif
/* initialize malloc() area */
mem_malloc_init();
malloc_bin_reloc();
#ifdef CONFIG_CMD_NAND
puts ("NAND: ");
nand_init (); /* go init the NAND */
#endif
#if defined(CONFIG_CMD_ONENAND)
onenand_init();
#endif
/* relocate environment function pointers etc. */
env_relocate();
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr("ipaddr");
#if defined(CONFIG_PCI)
/*
* Do pci configuration
*/
pci_init();
#endif
/** leave this here (after malloc(), environment and PCI are working) **/
/* Initialize devices */
devices_init ();
jumptable_init ();
/* Initialize the console (after the relocation and devices init) */
console_init_r ();
/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
/* Initialize from environment */
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
}
#if defined(CONFIG_CMD_NET)
if ((s = getenv ("bootfile")) != NULL) {
copy_filename (BootFile, s, sizeof (BootFile));
}
#endif
#ifdef CONFIG_CMD_SPI
puts ("SPI: ");
spi_init (); /* go init the SPI */
puts ("ready\n");
#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
#endif
#if defined(CONFIG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
puts ("Net: ");
#endif
eth_initialize(gd->bd);
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
main_loop ();
}
/* NOTREACHED - no way out of command loop except booting */
}
void hang (void)
{
puts ("### ERROR ### Please RESET the board ###\n");
for (;;);
}