tree a319178aa16dbe1e083a6ff2b99c5cd71207c18d
parent 3bc8556f9b24af60dba2b55a0abb1182dff45ecc
author Kim Phillips <kim.phillips@freescale.com> 1244229093 -0500
committer Kim Phillips <kim.phillips@freescale.com> 1244475909 -0500

mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI operation

In GMII mode (which operates at 3.3V) both SICRH TSEC1/2 output buffer
impedance bits should be clear, i.e., SICRH[TSIOB1] = 0 and SICRH[TSIOB2] = 0.
SICRH[TSIOB1] was erroneously being set high.

U-Boot always operated this PHY interface in GMII mode.  It is assumed this
was missed in the clean up by the original board porters, and copied along
to the TQM and sbc boards.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Ira Snyder <iws@ovro.caltech.edu>
Reviewed-by: David Hawkins <dwh@ovro.caltech.edu>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Dave Liu <DaveLiu@freescale.com>