blob: 69742049f6374a762ce72bacfaffaa2bfe7b631f [file] [log] [blame]
/*
* (C) Copyright 2010 Quantenna Communications Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*****************************************************************************
* This module provides several critical functions for a couple of scenarios:
* 1) For the case of uboot in flash, copy code to target
* 2) For the case of uboot loaded via serial, make clean copy for subsequent flash ops
* 3) Initialize ddr
* 4) Clear BSS
*****************************************************************************/
#include <config.h>
#include <asm/arcregs.h>
#include <asm/arch/platform.h>
#include <ruby_version.h>
#include <topaz_platform.h>
#include <topaz_config.h>
#include <uboot_header.h>
#include "timestamp_autogenerated.h"
/*****MACROS**********************************************************************************/
#include "start.inl"
/*****TEXT SECTION****************************************************************************/
.section .text
.align 4
_start:
.globl _start
/*
* DON'T put any code before .ascii "U-BOOT ...",
* bootcfg driver will check "U-BOOT" string.
*/
#if defined(PIGGY_BUILD) || !defined(RUBY_MINI)
b cold_boot
#else
b run_c
#endif
/* need easily identifiable tag at beginning of file with version */
.ascii "U-BOOT " RUBY_UBOOT_VERSION "\0"
.align 32
early_flash_config_start:
.globl early_flash_config_start
/* Early board config metadata can go here */
/* Space reserved for first three fields of early_flash_config structure */
#ifdef RUBY_BOOT_METHOD
.word RUBY_BOOT_METHOD
#else
.word RUBY_BOOT_METHOD_TRYLOOP
#endif
.skip 8
/* This is required for backward compatibility when U-Boot Mini
* runs U-Boot code with offset 0x30 */
.align 16
b warm_boot
.ascii U_BOOT_TIME_UTC "\0"
#ifdef U_BOOT_TINY
.ascii U_BOOT_TYPE_TINY
#elif defined(U_BOOT_MINI)
.ascii U_BOOT_TYPE_MINI
#else
.ascii U_BOOT_TYPE_LARGE
#endif
.align 32
early_flash_config_end:
.globl early_flash_config_end
warm_boot:
.globl warm_boot
mov r0, warm_boot
sub r0, r0, _start
b 1f
cold_boot:
#if defined(PIGGY_BUILD)
/* Init CPU timer to get the boot up time */
mov_s r0, 0xFFFFFFFF
sr r0, [ARC_REG_TIMER1_LIMIT]
mov_s r0, 0
sr r0, [ARC_REG_TIMER1_CNT]
mov_s r0, TIMER_CTRL_NH
sr r0, [ARC_REG_TIMER1_CTRL]
#endif
mov_s r0, 0
1:
/* SCRATCH_DATA0 is stored with the offset of warm boot */
sr r0, [SCRATCH_DATA0]
#if defined(PIGGY_BUILD) || !defined(RUBY_MINI)
; By default, disable i-cache/d-cache in bootloader start file
; and re-enable in board specific settings in U-boot
disable_dcache:
lr r0, [0x48] ; dc_ctrl register
or r0, r0, 0x1
sr r0, [0x48]
#ifdef TOPAZ_ICACHE_WORKAROUND
disable_icache:
; Disable i-cache
lr r0, [0x11] ; ic_ctrl register
or r0, r0, 0x1
sr r0, [0x11]
#endif
#if defined(PIGGY_BUILD)
/* reset bus monitors */
mov r0, 0
mov r1, 0xe0000200
st.di.as r0,[r1, 0x00]
st.di.as r0,[r1, 0x10]
st.di.as r0,[r1, 0x20]
st.di.as r0,[r1, 0x30]
st.di.as r0,[r1, 0x40]
st.di.as r0,[r1, 0x50]
st.di.as r0,[r1, 0x60]
st.di.as r0,[r1, 0x70]
ld.di.as r0,[r1, 0x00]
ld.di.as r0,[r1, 0x10]
ld.di.as r0,[r1, 0x20]
ld.di.as r0,[r1, 0x30]
ld.di.as r0,[r1, 0x40]
ld.di.as r0,[r1, 0x50]
ld.di.as r0,[r1, 0x60]
ld.di.as r0,[r1, 0x70]
#endif
M_REMOVE_FROM_RESET
M_GOTO_IF_EXEC_REMAPPED_SRAM run_c
#if defined(RUBY_SYS_CTL_MMAP_REGVAL)
M_IF_BOOT_FROM_FLASH
bne topaz_unified_mmap /* if we are running not from flash call the flip routine to
* flip the bit in place; will return to ruby_boot label */
#endif
j ruby_boot - TEXT_BASE + RUBY_SPI_FLASH_ADDR /* jump to physical spi address */
ruby_boot:
.globl ruby_boot
M_IF_BOOT_FROM_FLASH
bne run_c
#ifdef RUBY_SYS_CTL_MMAP_REGVAL
M_REMAP_MEM
#endif
M_COPY_UBOOT TEXT_BASE, RUBY_SPI_FLASH_ADDR
j run_c
#endif /* defined(PIGGY_BUILD) || !defined(RUBY_MINI) */
run_c:
M_FILL_BSS
#if defined(CONFIG_ARC_MAKE_UBOOT_COPY) && \
(defined(PIGGY_BUILD) || !defined(RUBY_MINI))
M_COPY_UBOOT CONFIG_ARC_FREE_BEGIN, TEXT_BASE
#endif
M_GOTO_C_CODE
#if defined(RUBY_SYS_CTL_MMAP_REGVAL) && (defined(PIGGY_BUILD) || !defined(RUBY_MINI))
#include <topaz_mmap.S>
#endif
/*********************************************************************************************/