blob: 3d2dc32231e5f14badc75ccf073d6b3e7e221995 [file] [log] [blame]
/*
* (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
*
* Modified to remove all but the IAP-command related code by
* Gary Jennejohn <garyj@denx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/hardware.h>
/* IAP commands use 32 bytes at the top of CPU internal sram, we
use 512 bytes below that */
#define COPY_BUFFER_LOCATION 0x40003de0
#define IAP_LOCATION 0x7ffffff1
#define IAP_CMD_PREPARE 50
#define IAP_CMD_COPY 51
#define IAP_CMD_ERASE 52
#define IAP_CMD_CHECK 53
#define IAP_CMD_ID 54
#define IAP_CMD_VERSION 55
#define IAP_CMD_COMPARE 56
#define IAP_RET_CMD_SUCCESS 0
static unsigned long command[5];
static unsigned long result[2];
extern void iap_entry(unsigned long * command, unsigned long * result);
/*-----------------------------------------------------------------------
*
*/
static int get_flash_sector(flash_info_t * info, ulong flash_addr)
{
int i;
for(i = 1; i < (info->sector_count); i++) {
if (flash_addr < (info->start[i]))
break;
}
return (i-1);
}
/*-----------------------------------------------------------------------
* This function assumes that flash_addr is aligned on 512 bytes boundary
* in flash. This function also assumes that prepare have been called
* for the sector in question.
*/
int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
{
int first_sector;
int last_sector;
first_sector = get_flash_sector(info, flash_addr);
last_sector = get_flash_sector(info, flash_addr + 512 - 1);
/* prepare sectors for write */
command[0] = IAP_CMD_PREPARE;
command[1] = first_sector;
command[2] = last_sector;
iap_entry(command, result);
if (result[0] != IAP_RET_CMD_SUCCESS) {
printf("IAP prepare failed\n");
return ERR_PROG_ERROR;
}
command[0] = IAP_CMD_COPY;
command[1] = flash_addr;
command[2] = COPY_BUFFER_LOCATION;
command[3] = 512;
command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
iap_entry(command, result);
if (result[0] != IAP_RET_CMD_SUCCESS) {
printf("IAP copy failed\n");
return 1;
}
return 0;
}
/*-----------------------------------------------------------------------
*/
int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last)
{
int flag;
int prot;
int sect;
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot)
return ERR_PROTECTED;
flag = disable_interrupts();
printf ("Erasing %d sectors starting at sector %2d.\n"
"This make take some time ... ",
s_last - s_first + 1, s_first);
command[0] = IAP_CMD_PREPARE;
command[1] = s_first;
command[2] = s_last;
iap_entry(command, result);
if (result[0] != IAP_RET_CMD_SUCCESS) {
printf("IAP prepare failed\n");
return ERR_PROTECTED;
}
command[0] = IAP_CMD_ERASE;
command[1] = s_first;
command[2] = s_last;
command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
iap_entry(command, result);
if (result[0] != IAP_RET_CMD_SUCCESS) {
printf("IAP erase failed\n");
return ERR_PROTECTED;
}
if (flag)
enable_interrupts();
return ERR_OK;
}
int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr,
ulong cnt)
{
int first_copy_size;
int last_copy_size;
int first_block;
int last_block;
int nbr_mid_blocks;
uchar memmap_value;
ulong i;
uchar* src_org;
uchar* dst_org;
int ret = ERR_OK;
src_org = src;
dst_org = (uchar*)addr;
first_block = addr / 512;
last_block = (addr + cnt) / 512;
nbr_mid_blocks = last_block - first_block - 1;
first_copy_size = 512 - (addr % 512);
last_copy_size = (addr + cnt) % 512;
debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
(ulong)(first_block * 512),
(ulong)COPY_BUFFER_LOCATION,
(ulong)src,
(ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
first_copy_size,
(ulong)COPY_BUFFER_LOCATION,
(ulong)(first_block * 512));
/* copy first block */
memcpy((void*)COPY_BUFFER_LOCATION,
(void*)(first_block * 512), 512);
memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
src, first_copy_size);
lpc2292_copy_buffer_to_flash(info, first_block * 512);
src += first_copy_size;
addr += first_copy_size;
/* copy middle blocks */
for (i = 0; i < nbr_mid_blocks; i++) {
debug("copy middle block: %lX -> %lX 512 bytes, "
"%lX -> %lX 512 bytes\n",
(ulong)src,
(ulong)COPY_BUFFER_LOCATION,
(ulong)COPY_BUFFER_LOCATION,
(ulong)addr);
memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
lpc2292_copy_buffer_to_flash(info, addr);
src += 512;
addr += 512;
}
if (last_copy_size > 0) {
debug("copy last block: (1) %lX -> %lX 0x200 bytes, "
"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
(ulong)(last_block * 512),
(ulong)COPY_BUFFER_LOCATION,
(ulong)src,
(ulong)(COPY_BUFFER_LOCATION),
last_copy_size,
(ulong)COPY_BUFFER_LOCATION,
(ulong)addr);
/* copy last block */
memcpy((void*)COPY_BUFFER_LOCATION,
(void*)(last_block * 512), 512);
memcpy((void*)COPY_BUFFER_LOCATION,
src, last_copy_size);
lpc2292_copy_buffer_to_flash(info, addr);
}
/* verify write */
memmap_value = GET8(MEMMAP);
disable_interrupts();
PUT8(MEMMAP, 01); /* we must make sure that initial 64
bytes are taken from flash when we
do the compare */
for (i = 0; i < cnt; i++) {
if (*dst_org != *src_org){
printf("Write failed. Byte %lX differs\n", i);
ret = ERR_PROG_ERROR;
break;
}
dst_org++;
src_org++;
}
PUT8(MEMMAP, memmap_value);
enable_interrupts();
return ret;
}