blob: 29a331eff790cce3d8026719e571940792a302d2 [file] [log] [blame]
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
ulong myflush(void);
#define FLASH_BANK_SIZE 0x800000
#define MAIN_SECT_SIZE 0x20000
#define PARAM_SECT_SIZE 0x4000
/* puzzle magic for lart
* data_*_flash are def'd in flashasm.S
*/
extern u32 data_from_flash(u32);
extern u32 data_to_flash(u32);
#define PUZZLE_FROM_FLASH(x) data_from_flash((x))
#define PUZZLE_TO_FLASH(x) data_to_flash((x))
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
#define CMD_READ_ARRAY 0x00FF00FF
#define CMD_IDENTIFY 0x00900090
#define CMD_ERASE_SETUP 0x00200020
#define CMD_ERASE_CONFIRM 0x00D000D0
#define CMD_PROGRAM 0x00400040
#define CMD_RESUME 0x00D000D0
#define CMD_SUSPEND 0x00B000B0
#define CMD_STATUS_READ 0x00700070
#define CMD_STATUS_RESET 0x00500050
#define BIT_BUSY 0x00800080
#define BIT_ERASE_SUSPEND 0x00400040
#define BIT_ERASE_ERROR 0x00200020
#define BIT_PROGRAM_ERROR 0x00100010
#define BIT_VPP_RANGE_ERROR 0x00080008
#define BIT_PROGRAM_SUSPEND 0x00040004
#define BIT_PROTECT_ERROR 0x00020002
#define BIT_UNDEFINED 0x00010001
#define BIT_SEQUENCE_ERROR 0x00300030
#define BIT_TIMEOUT 0x80000000
/*-----------------------------------------------------------------------
*/
ulong flash_init(void)
{
int i, j;
ulong size = 0;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
{
ulong flashbase = 0;
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F160F3B & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
if (i == 0)
flashbase = PHYS_FLASH_1;
else
panic("configured too many flash banks!\n");
for (j = 0; j < flash_info[i].sector_count; j++)
{
if (j <= 7)
{
flash_info[i].start[j] = flashbase + j * PARAM_SECT_SIZE;
}
else
{
flash_info[i].start[j] = flashbase + (j - 7)*MAIN_SECT_SIZE;
}
}
size += flash_info[i].size;
}
/* Protect monitor and environment sectors
*/
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE,
CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
&flash_info[0]);
return size;
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
switch (info->flash_id & FLASH_VENDMASK)
{
case (INTEL_MANUFACT & FLASH_VENDMASK):
printf("Intel: ");
break;
default:
printf("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK)
{
case (INTEL_ID_28F160F3B & FLASH_TYPEMASK):
printf("2x 28F160F3B (16Mbit)\n");
break;
default:
printf("Unknown Chip Type\n");
goto Done;
break;
}
printf(" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++)
{
if ((i % 5) == 0)
{
printf ("\n ");
}
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
Done:
;
}
/*-----------------------------------------------------------------------
*/
int flash_error (ulong code)
{
/* Check bit patterns */
/* SR.7=0 is busy, SR.7=1 is ready */
/* all other flags indicate error on 1 */
/* SR.0 is undefined */
/* Timeout is our faked flag */
/* sequence is described in Intel 290644-005 document */
/* check Timeout */
if (code & BIT_TIMEOUT)
{
printf ("Timeout\n");
return ERR_TIMOUT;
}
/* check Busy, SR.7 */
if (~code & BIT_BUSY)
{
printf ("Busy\n");
return ERR_PROG_ERROR;
}
/* check Vpp low, SR.3 */
if (code & BIT_VPP_RANGE_ERROR)
{
printf ("Vpp range error\n");
return ERR_PROG_ERROR;
}
/* check Device Protect Error, SR.1 */
if (code & BIT_PROTECT_ERROR)
{
printf ("Device protect error\n");
return ERR_PROG_ERROR;
}
/* check Command Seq Error, SR.4 & SR.5 */
if (code & BIT_SEQUENCE_ERROR)
{
printf ("Command seqence error\n");
return ERR_PROG_ERROR;
}
/* check Block Erase Error, SR.5 */
if (code & BIT_ERASE_ERROR)
{
printf ("Block erase error\n");
return ERR_PROG_ERROR;
}
/* check Program Error, SR.4 */
if (code & BIT_PROGRAM_ERROR)
{
printf ("Program error\n");
return ERR_PROG_ERROR;
}
/* check Block Erase Suspended, SR.6 */
if (code & BIT_ERASE_SUSPEND)
{
printf ("Block erase suspended\n");
return ERR_PROG_ERROR;
}
/* check Program Suspended, SR.2 */
if (code & BIT_PROGRAM_SUSPEND)
{
printf ("Program suspended\n");
return ERR_PROG_ERROR;
}
/* OK, no error */
return ERR_OK;
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
ulong result;
int iflag, cflag, prot, sect;
int rc = ERR_OK;
/* first look for protection bits */
if (info->flash_id == FLASH_UNKNOWN)
return ERR_UNKNOWN_FLASH_TYPE;
if ((s_first < 0) || (s_first > s_last)) {
return ERR_INVAL;
}
if ((info->flash_id & FLASH_VENDMASK) !=
(INTEL_MANUFACT & FLASH_VENDMASK)) {
return ERR_UNKNOWN_FLASH_VENDOR;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot)
return ERR_PROTECTED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
cflag = icache_status();
icache_disable();
iflag = disable_interrupts();
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
{
printf("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
if (info->protect[sect] == 0)
{ /* not protected */
vu_long *addr = (vu_long *)(info->start[sect]);
*addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
*addr = PUZZLE_TO_FLASH(CMD_ERASE_SETUP);
*addr = PUZZLE_TO_FLASH(CMD_ERASE_CONFIRM);
/* wait until flash is ready */
do
{
/* check timeout */
if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
{
*addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
result = BIT_TIMEOUT;
break;
}
result = PUZZLE_FROM_FLASH(*addr);
} while (~result & BIT_BUSY);
*addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
if ((rc = flash_error(result)) != ERR_OK)
goto outahere;
printf("ok.\n");
}
else /* it was protected */
{
printf("protected!\n");
}
}
if (ctrlc())
printf("User Interrupt!\n");
outahere:
/* allow flash to settle - wait 10 ms */
udelay_masked(10000);
if (iflag)
enable_interrupts();
if (cflag)
icache_enable();
return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash
*/
static int write_word (flash_info_t *info, ulong dest, ulong data)
{
vu_long *addr = (vu_long *)dest;
ulong result;
int rc = ERR_OK;
int cflag, iflag;
/* Check if Flash is (sufficiently) erased
*/
result = PUZZLE_FROM_FLASH(*addr);
if ((result & data) != data)
return ERR_NOT_ERASED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
cflag = icache_status();
icache_disable();
iflag = disable_interrupts();
*addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
*addr = PUZZLE_TO_FLASH(CMD_PROGRAM);
*addr = data;
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
/* wait until flash is ready */
do
{
/* check timeout */
if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
{
*addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
result = BIT_TIMEOUT;
break;
}
result = PUZZLE_FROM_FLASH(*addr);
} while (~result & BIT_BUSY);
*addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
rc = flash_error(result);
if (iflag)
enable_interrupts();
if (cflag)
icache_enable();
return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash.
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int l;
int i, rc;
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 24);
}
for (; i<4 && cnt>0; ++i) {
data = (data >> 8) | (*src++ << 24);
--cnt;
++cp;
}
for (; cnt==0 && i<4; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 24);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
data = *((vu_long*)src);
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
src += 4;
wp += 4;
cnt -= 4;
}
if (cnt == 0) {
return ERR_OK;
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
data = (data >> 8) | (*src++ << 24);
--cnt;
}
for (; i<4; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 24);
}
return write_word(info, wp, data);
}