/*
 * (C) Copyright 2000-2002
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * Copyright 2008, Network Appliance Inc.
 * Jason McMullan <mcmullan@netapp.com>
 *
 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <malloc.h>
#include <spi_flash.h>

#include "spi_flash_internal.h"
/*#define debug(fmt,args...)  printf(fmt ,##args) */
/* M25Pxx-specific commands */
#define CMD_M25PXX_WREN		0x06	/* Write Enable */
#define CMD_M25PXX_WRDI		0x04	/* Write Disable */
#define CMD_M25PXX_RDSR		0x05	/* Read Status Register */
#define CMD_M25PXX_WRSR		0x01	/* Write Status Register */
#define CMD_M25PXX_READ		0x03	/* Read Data Bytes */
#define CMD_M25PXX_FAST_READ	0x0b	/* Read Data Bytes at Higher Speed */
#define CMD_M25PXX_PP		0x02	/* Page Program */
#define CMD_M25PXX_SE		0xd8	/* Sector Erase */
#define CMD_M25PXX_BE		0xc7	/* Bulk Erase */
#define CMD_M25PXX_DP		0xb9	/* Deep Power-down */
#define CMD_M25PXX_RES		0xab	/* Release from DP, and Read Signature */
#define CMD_M25PXX_EN4BYTEADDR	0xb7	/* Enter 4-byte address mode */
#define CMD_M25PXX_RDLR		0xe8	/* Read Lock Register */
#define CMD_M25PXX_WRLR		0xe5	/* Write Lock Register */

#define STM_ID_M25P16		0x15
#define STM_ID_M25P20		0x12
#define STM_ID_M25P32		0x16
#define STM_ID_M25P40		0x13
#define STM_ID_M25P64		0x17
#define STM_ID_M25P80		0x14

#define STM_ID_N25Q256		0x19
 
#define STMICRO_SR_WIP		(1 << 0)	/* Write-in-Progress */
#ifdef	MV88F6601
#define STM_ID_M25Q128		0x18	/* for A-MC */
#define STM_PROTECT_ALL		0x5C
#else
#define STM_ID_M25P128		0x18    /* for KW2  */
#define STM_PROTECT_ALL		0x1C
#endif
#define STM_SRWD			0x80

struct stmicro_spi_flash_params {
	u8 idcode1;
	u16 page_size;
	u16 pages_per_sector;
	u16 nr_sectors;
	u8 addr_cycles;
	const char *name;
};

/* spi_flash needs to be first so upper layers can free() it */
struct stmicro_spi_flash {
	struct spi_flash flash;
	const struct stmicro_spi_flash_params *params;
};

static inline struct stmicro_spi_flash *to_stmicro_spi_flash(struct spi_flash
							     *flash)
{
	return container_of(flash, struct stmicro_spi_flash, flash);
}

static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = {
	{
		.idcode1 = STM_ID_M25P16,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 32,
		.addr_cycles = 3,
		.name = "M25P16",
	},
	{
		.idcode1 = STM_ID_M25P20,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 4,
		.addr_cycles = 3,
		.name = "M25P20",
	},
	{
		.idcode1 = STM_ID_M25P32,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 64,
		.addr_cycles = 3,
		.name = "M25P32",
	},
	{
		.idcode1 = STM_ID_M25P40,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 8,
		.addr_cycles = 3,
		.name = "M25P40",
	},
	{
		.idcode1 = STM_ID_M25P64,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 128,
		.addr_cycles = 3,
		.name = "M25P64",
	},
	{
		.idcode1 = STM_ID_M25P80,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 16,
		.addr_cycles = 3,
		.name = "M25P80",
	},
	{
#ifdef MV88F6601
		.idcode1 = STM_ID_M25Q128,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 256,
 		.addr_cycles = 3,
		.name = "M25Q128",
#else
		.idcode1 = STM_ID_M25P128,
		.page_size = 256,
		.pages_per_sector = 1024,
		.nr_sectors = 64,
 		.addr_cycles = 3,
		.name = "M25P128",

#endif
	},
	{
		.idcode1 = STM_ID_N25Q256,
		.page_size = 256,
		.pages_per_sector = 256,
		.nr_sectors = 512,
		.addr_cycles = 4,
		.name = "N25Q256",
	},
};

static int stmicro_wait_ready(struct spi_flash *flash, unsigned long timeout)
{
	struct spi_slave *spi = flash->spi;
	unsigned long timebase;
	int ret;
	u8 cmd = CMD_M25PXX_RDSR;
	u8 status;

	ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
	if (ret) {
		debug("SF: Failed to send command %02x: %d\n", cmd, ret);
		return ret;
	}

	timebase = get_timer(0);
	do {
		ret = spi_xfer(spi, 8, NULL, &status, 0);
		if (ret)
			return -1;

		if ((status & STMICRO_SR_WIP) == 0)
			break;

	} while (get_timer(timebase) < timeout);

	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);

	if ((status & STMICRO_SR_WIP) == 0)
		return 0;

	/* Timed out */
	return -1;
}

static u8 *stmicro_set_cmd_addr(struct stmicro_spi_flash *stm, u8 *cmd,
				u32 addr)
{
	unsigned long page_addr = addr / stm->params->page_size;

	switch  (stm->params->addr_cycles) {
	case 4:
		*cmd++ = page_addr >> 16;
		*cmd++ = page_addr >> 8;
		*cmd++ = page_addr;
		*cmd++ = addr % stm->params->page_size;
		break;
	case 3:
	default:
		*cmd++ = page_addr >> 8;
		*cmd++ = page_addr;
		*cmd++ = addr % stm->params->page_size;
		break;
	}

	return cmd;
}

static int stmicro_read_fast(struct spi_flash *flash,
			     u32 offset, size_t len, void *buf)
{
	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
	unsigned long page_addr;
	unsigned long page_size;
	u8 cmd[6];

	page_size = stm->params->page_size;
	page_addr = offset / page_size;

	cmd[0] = CMD_READ_ARRAY_FAST;
	switch  (stm->params->addr_cycles) {
	case 4:
		cmd[1] = page_addr >> 16;
		cmd[2] = page_addr >> 8;
		cmd[3] = page_addr;
		cmd[4] = offset % page_size;
		cmd[5] = 0x00;
		break;
	case 3:
	default:
	cmd[1] = page_addr >> 8;
	cmd[2] = page_addr;
	cmd[3] = offset % page_size;
	cmd[4] = 0x00;
		break;
	}

	return spi_flash_read_common(flash, cmd, stm->params->addr_cycles + 2, buf, len);
}

static int stmicro_write(struct spi_flash *flash,
			 u32 offset, size_t len, const void *buf)
{
	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
	unsigned long page_addr;
	unsigned long byte_addr;
	unsigned long page_size;
	size_t chunk_len;
	size_t actual;
	int ret;
	u8 cmd[5];

	page_size = stm->params->page_size;
	page_addr = offset / page_size;
	byte_addr = offset % page_size;

	ret = spi_claim_bus(flash->spi);
	if (ret) {
		debug("SF: Unable to claim SPI bus\n");
		return ret;
	}

	ret = 0;
	for (actual = 0; actual < len; actual += chunk_len) {
		chunk_len = min(len - actual, page_size - byte_addr);

		cmd[0] = CMD_M25PXX_PP;
		switch  (stm->params->addr_cycles) {
		case 4:
			cmd[1] = page_addr >> 16;
			cmd[2] = page_addr >> 8;
			cmd[3] = page_addr;
			cmd[4] = byte_addr;
			break;
		case 3:
		default:
		cmd[1] = page_addr >> 8;
		cmd[2] = page_addr;
		cmd[3] = byte_addr;
			break;
		}

		debug
		    ("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x%02x } chunk_len = %d\n",
		     buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], chunk_len);

		ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
		if (ret < 0) {
			debug("SF: Enabling Write failed\n");
			break;
		}

		ret = spi_flash_cmd_write(flash->spi, cmd, stm->params->addr_cycles + 1,
					  buf + actual, chunk_len);
		if (ret < 0) {
			debug("SF: STMicro Page Program failed\n");
			break;
		}

		ret = stmicro_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
		if (ret < 0) {
			debug("SF: STMicro page programming timed out\n");
			break;
		}

		page_addr++;
		byte_addr = 0;
	}

	debug("SF: STMicro: Successfully programmed %u bytes @ 0x%x\n",
	      len, offset);

	spi_release_bus(flash->spi);
	return ret;
}

int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len)
{
	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
	unsigned long sector_size;
	size_t current;
	int ret;
	u8 cmd[5];

	/*
	 * This function currently uses sector erase only.
	 * probably speed things up by using bulk erase
	 * when possible.
	 */

	sector_size = stm->params->page_size * stm->params->pages_per_sector;

	if (offset % sector_size || len % sector_size) {
		printf("SF: Erase offset/length not multiple of sector size\n");
		return -1;
	}

	len /= sector_size;
	cmd[0] = CMD_M25PXX_SE;
	switch  (stm->params->addr_cycles) {
	case 3:
	default:
	cmd[2] = 0x00;
	case 4:
	cmd[3] = 0x00;
		cmd[4] = 0x00;
		break;
	}

	ret = spi_claim_bus(flash->spi);
	if (ret) {
		printf("SF: Unable to claim SPI bus\n");
		return ret;
	}

	ret = 0;
	for (current = 0; current < len; current++) {
		switch (stm->params->addr_cycles) {
		case 3:
		default:
		cmd[1] = (offset>>16) + ((sector_size>>16) * current);
			break;
		case 4:
			cmd[1] = (offset + (sector_size * current)) >> 24;
			cmd[2] = (offset + (sector_size * current)) >> 16;
			break;
		}

		debug ("Erase => cmd = { 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x } current sector = %d\n",
		       cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], current);

		ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
		if (ret < 0) {
			debug("SF: Enabling Write failed\n");
			break;
		}

		ret = spi_flash_cmd_write(flash->spi, cmd,  stm->params->addr_cycles + 1, NULL, 0);
		if (ret < 0) {
			debug("SF: STMicro page erase failed\n");
			break;
		}

		ret = stmicro_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
		if (ret < 0) {
			debug("SF: STMicro page erase timed out\n");
			break;
		}
	}

	debug("SF: STMicro: Successfully erased %u bytes @ 0x%x\n",
	      len * sector_size, offset);

	spi_release_bus(flash->spi);
	return ret;
}
#ifdef CONFIG_SPI_FLASH_PROTECTION
static int stmicro_protect(struct spi_flash *flash, int enable)
{
	//struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
	int ret;
	u8 cmd[2];

	ret = spi_claim_bus(flash->spi);
	if (ret) {
		debug("SF: Unable to claim SPI bus\n");
		return ret;
	}

	ret = 0;

	cmd[0] = CMD_M25PXX_WRSR;
	if (enable == 1)
		cmd[1] = STM_SRWD | STM_PROTECT_ALL;
	else
		cmd[1] = STM_SRWD;

	ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
	if (ret < 0) {
		debug("SF: Enabling Write failed\n");
		return ret;
	}

	ret = spi_flash_cmd_write(flash->spi, cmd, 2, NULL, 0);
	if (ret < 0) {
		debug("SF: STMicro Write Status Register failed\n");
		return ret;
	}

	ret = stmicro_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
	if (ret < 0) {
		debug("SF: STMicro page programming timed out\n");
		return ret;
	}

/*	debug("SF: STMicro: Successfully Write Status Register %u bytes @ 0x%x\n",
	      len, offset);
*/
	spi_release_bus(flash->spi);
	return ret;
}

static int stmicro_read_lock(struct spi_flash *flash, u32 offset, int *lock)
{
	u8 cmd[5];
	u8 data;
	int ret;
	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);

	ret = spi_claim_bus(flash->spi);
	if (ret)
		return ret;

	cmd[0] = CMD_M25PXX_RDLR;
	stmicro_set_cmd_addr(stm, &cmd[1], offset);
	ret = spi_flash_cmd_read(flash->spi, cmd, 1 + stm->params->addr_cycles,
					&data, 1);
	if (ret < 0) {
		debug("SF: STMicro Read Lock register failed\n");
		return ret;
	}

	spi_release_bus(flash->spi);
	*lock = data;

	return 0;
}

static int stmicro_write_lock(struct spi_flash *flash, u32 offset, int lock)
{
	u8 cmd[5];
	u8 data = lock;
	int ret;
	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);

	ret = spi_claim_bus(flash->spi);
	if (ret)
		return ret;

	ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
	if (ret < 0) {
		debug("SF: Write Enable failed\n");
		return ret;
	}

	cmd[0] = CMD_M25PXX_WRLR;
	stmicro_set_cmd_addr(stm, &cmd[1], offset);
	ret = spi_flash_cmd_write(flash->spi, cmd, 1 + stm->params->addr_cycles,
					&data, 1);
	if (ret < 0) {
		debug("SF: STMicro Write Lock register failed\n");
		return ret;
	}

	spi_release_bus(flash->spi);

	return 0;
}

static int stmicro_lock(struct spi_flash *flash, u32 offset, size_t len,
			int lock)
{
	int ret;
	u32 cur;
	u32 end;
	u32 sector_size;
	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);

	sector_size
		= (u32)stm->params->page_size * stm->params->pages_per_sector;
	cur = (offset / sector_size) * sector_size;
	end = offset + len;

	while (cur < end) {
		ret = stmicro_write_lock(flash, cur, lock);
		if (ret)
			return ret;

		cur += sector_size;
	}

	return 0;
}
#endif

struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode)
{
	const struct stmicro_spi_flash_params *params;
	struct stmicro_spi_flash *stm;
	unsigned int i;

	for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) {
		params = &stmicro_spi_flash_table[i];
		if (params->idcode1 == idcode[2]) {
			break;
		}
	}

	if (i == ARRAY_SIZE(stmicro_spi_flash_table)) {
		printf("SF: Unsupported STMicro ID %02x\n", idcode[1]);
		return NULL;
	}

	stm = malloc(sizeof(struct stmicro_spi_flash));
	if (!stm) {
		debug("SF: Failed to allocate memory\n");
		return NULL;
	}

	stm->params = params;
	stm->flash.spi = spi;
	stm->flash.name = params->name;

	stm->flash.write = stmicro_write;
	stm->flash.erase = stmicro_erase;
	stm->flash.read = stmicro_read_fast;
#ifdef CONFIG_SPI_FLASH_PROTECTION
	stm->flash.protect = stmicro_protect;
	stm->flash.read_lock = stmicro_read_lock;
	stm->flash.write_lock = stmicro_write_lock;
	stm->flash.lock = stmicro_lock;
#endif
	stm->flash.size = params->page_size * params->pages_per_sector
	    * params->nr_sectors;

	if (stm->params->addr_cycles == 4) {
		int ret;

		printf("SF: Entering 4-byte address mode\n");

		ret = spi_claim_bus(stm->flash.spi);
		if (ret) {
			printf("SF: Unable to claim SPI bus\n");
			goto free;
		}

		ret = spi_flash_cmd(stm->flash.spi, CMD_M25PXX_WREN, NULL, 0);
		if (ret < 0) {
			printf("SF: Enabling Write failed\n");
			goto release;
		}

		ret = spi_flash_cmd(stm->flash.spi, CMD_M25PXX_EN4BYTEADDR, NULL, 0);
		if (ret < 0) {
			printf("SF: Entering 4-byte address mode failed\n");
			spi_release_bus(stm->flash.spi);
			goto release;
		}

		ret = stmicro_wait_ready(&stm->flash, SPI_FLASH_PROG_TIMEOUT);
		if (ret < 0) {
			printf("SF: Entering 4-byte address mode timed out\n");
			goto release;
		}

		spi_release_bus(stm->flash.spi);
	}

	printf("SF: Detected %s with page size %u, total %u bytes\n",
	      params->name, params->page_size, stm->flash.size);

	return &stm->flash;

release:
	spi_release_bus(stm->flash.spi);
free:
	free(stm);
	return NULL;
}