include/configs/mx31ads.h - uboot/prism - Git at Google

 /*
  * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
  *
  * Configuration settings for the MX31ADS Freescale board.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <asm/arch/mx31-regs.h>

  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1		/* This is an arm1136 CPU core */
 #define CONFIG_MX31		1		/* in a mx31 */
 #define CONFIG_MX31_HCLK_FREQ	26000000	/* RedBoot says 26MHz */
 #define CONFIG_MX31_CLK32	32768

 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

 /*
  * Disabled for now due to build problems under Debian and a significant increase
  * in the final file size: 144260 vs. 109536 Bytes.
  */
 #if 0
 #define CONFIG_OF_LIBFDT		1
 #define CONFIG_FIT			1
 #define CONFIG_FIT_VERBOSE		1
 #endif

 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

 /*
  * Hardware drivers
  */

 #define CONFIG_MXC_UART	1
 #define CONFIG_SYS_MX31_UART1		1

 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
 #define CONFIG_DEFAULT_SPI_BUS	1
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)

 #define CONFIG_RTC_MC13783	1
 /* MC13783 connected to CSPI2 and SS0 */
 #define CONFIG_MC13783_SPI_BUS	1
 #define CONFIG_MC13783_SPI_CS	0

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}

 /***********************************************************
  * Command definition
  ***********************************************************/

 #include <config_cmd_default.h>

 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_DATE

 #define CONFIG_BOOTDELAY	3

 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */

 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"uboot_addr=0xa0000000\0"					\
 	"uboot=mx31ads/u-boot.bin\0"					\
 	"kernel=mx31ads/uImage\0"					\
 	"nfsroot=/opt/eldk/arm\0"					\
 	"bootargs_base=setenv bootargs console=ttymxc0,115200\0"	\
 	"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "	\
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"	\
 	"bootcmd=run bootcmd_net\0"					\
 	"bootcmd_net=run bootargs_base bootargs_nfs; "			\
 		"tftpboot ${loadaddr} ${kernel}; bootm\0"		\
 	"prg_uboot=tftpboot ${loadaddr} ${uboot}; "			\
 		"protect off ${uboot_addr} 0xa003ffff; "		\
 		"erase ${uboot_addr} 0xa003ffff; "			\
 		"cp.b ${loadaddr} ${uboot_addr} ${filesize}; "		\
 		"setenv filesize; saveenv\0"

 #define CONFIG_DRIVER_CS8900	1
 #define CS8900_BASE		0xb4020300
 #define CS8900_BUS16		1	/* follow the Linux driver */

 /*
  * The MX31ADS board seems to have a hardware "peculiarity" confirmed under
  * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A
  * controller inverted. The controller is capable of detecting and correcting
  * this, but it needs 4 network packets for that. Which means, at startup, you
  * will not receive answers to the first 4 packest, unless there have been some
  * broadcasts on the network, or your board is on a hub. Reducing the ARP
  * timeout from default 5 seconds to 200ms we speed up the initial TFTP
  * transfer, should the user wish one, significantly.
  */
 #define CONFIG_ARP_TIMEOUT	200UL

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */

 #define CONFIG_SYS_MEMTEST_START	0		/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000

 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

 #define CONFIG_SYS_HZ			1000

 #define CONFIG_CMDLINE_EDITING	1

 /*-----------------------------------------------------------------------
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */

 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)

 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 #define CONFIG_SYS_FLASH_BASE		CS0_BASE
 #define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	262		/* max number of sectors on one chip */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256KiB */

 #define	CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SECT_SIZE	(32 * 1024)
 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE

 /* Address and size of Redundant Environment Sector	*/
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE

 /* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end.
  * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors,
  * if we put environment next to it, we will have to occupy 128KiB for it.
  * Putting it at the top of flash we use only 32KiB. */
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)

 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
 #define CONFIG_SYS_FLASH_CFI			1 /* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER		1 /* Use drivers/cfi_flash.c */
 #define CONFIG_FLASH_SPANSION_S29WS_N	1 /* A non-standard buffered write algorithm */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1 /* Use buffered writes (~10x faster) */
 #define CONFIG_SYS_FLASH_PROTECTION		1 /* Use hardware sector protection */

 /*
  * JFFS2 partitions
  */
 #undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV	"nor0"

 #endif /* __CONFIG_H */
	/*
	* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
	*
	* Configuration settings for the MX31ADS Freescale board.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <asm/arch/mx31-regs.h>

	/* High Level Configuration Options */
	#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
	#define CONFIG_MX31 1 /* in a mx31 */
	#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */
	#define CONFIG_MX31_CLK32 32768

	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO

	/*
	* Disabled for now due to build problems under Debian and a significant increase
	* in the final file size: 144260 vs. 109536 Bytes.
	*/
	#if 0
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_FIT 1
	#define CONFIG_FIT_VERBOSE 1
	#endif

	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

	/*
	* Hardware drivers
	*/

	#define CONFIG_MXC_UART 1
	#define CONFIG_SYS_MX31_UART1 1

	#define CONFIG_HARD_SPI 1
	#define CONFIG_MXC_SPI 1
	#define CONFIG_DEFAULT_SPI_BUS 1
	#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 \| SPI_CS_HIGH)

	#define CONFIG_RTC_MC13783 1
	/* MC13783 connected to CSPI2 and SS0 */
	#define CONFIG_MC13783_SPI_BUS 1
	#define CONFIG_MC13783_SPI_CS 0

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}

	/***********************************************************
	* Command definition
	***********************************************************/

	#include <config_cmd_default.h>

	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_SPI
	#define CONFIG_CMD_DATE

	#define CONFIG_BOOTDELAY 3

	#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"uboot_addr=0xa0000000\0" \
	"uboot=mx31ads/u-boot.bin\0" \
	"kernel=mx31ads/uImage\0" \
	"nfsroot=/opt/eldk/arm\0" \
	"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
	"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"bootcmd=run bootcmd_net\0" \
	"bootcmd_net=run bootargs_base bootargs_nfs; " \
	"tftpboot ${loadaddr} ${kernel}; bootm\0" \
	"prg_uboot=tftpboot ${loadaddr} ${uboot}; " \
	"protect off ${uboot_addr} 0xa003ffff; " \
	"erase ${uboot_addr} 0xa003ffff; " \
	"cp.b ${loadaddr} ${uboot_addr} ${filesize}; " \
	"setenv filesize; saveenv\0"

	#define CONFIG_DRIVER_CS8900 1
	#define CS8900_BASE 0xb4020300
	#define CS8900_BUS16 1 /* follow the Linux driver */

	/*
	* The MX31ADS board seems to have a hardware "peculiarity" confirmed under
	* U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A
	* controller inverted. The controller is capable of detecting and correcting
	* this, but it needs 4 network packets for that. Which means, at startup, you
	* will not receive answers to the first 4 packest, unless there have been some
	* broadcasts on the network, or your board is on a hub. Reducing the ARP
	* timeout from default 5 seconds to 200ms we speed up the initial TFTP
	* transfer, should the user wish one, significantly.
	*/
	#define CONFIG_ARP_TIMEOUT 200UL

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "=> "
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x10000

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	#define CONFIG_SYS_HZ 1000

	#define CONFIG_CMDLINE_EDITING 1

	/*-----------------------------------------------------------------------
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */

	/*-----------------------------------------------------------------------
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM_1 CSD0_BASE
	#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)

	/*-----------------------------------------------------------------------
	* FLASH and environment organization
	*/
	#define CONFIG_SYS_FLASH_BASE CS0_BASE
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 262 /* max number of sectors on one chip */
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_SECT_SIZE (32 * 1024)
	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE

	/* Address and size of Redundant Environment Sector */
	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE

	/* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end.
	* The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors,
	* if we put environment next to it, we will have to occupy 128KiB for it.
	* Putting it at the top of flash we use only 32KiB. */
	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)

	/*-----------------------------------------------------------------------
	* CFI FLASH driver setup
	*/
	#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
	#define CONFIG_FLASH_SPANSION_S29WS_N 1 /* A non-standard buffered write algorithm */
	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
	#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */

	/*
	* JFFS2 partitions
	*/
	#undef CONFIG_CMD_MTDPARTS
	#define CONFIG_JFFS2_DEV "nor0"

	#endif /* __CONFIG_H */