| /* |
| * (C) Copyright 2000, 2001, 2002 |
| * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. |
| * |
| * Configuration for the Auerswald Innokom CPU board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * include/configs/innokom.h - configuration options, board specific |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ |
| #define CONFIG_INNOKOM 1 /* on an Auerswald Innokom board */ |
| |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| /* for timer/console/ethernet */ |
| |
| /* we will never enable dcache, because we have to setup MMU first */ |
| #define CONFIG_SYS_NO_DCACHE |
| |
| /* |
| * Hardware drivers |
| */ |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_PXA_SERIAL |
| #define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 19200 |
| #define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */ |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_BDI |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_ECHO |
| #define CONFIG_CMD_SAVEENV |
| #define CONFIG_CMD_FLASH |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_IMI |
| #define CONFIG_CMD_LOADB |
| #define CONFIG_CMD_MEMORY |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_RUN |
| |
| |
| #define CONFIG_BOOTDELAY 3 |
| /* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ |
| #define CONFIG_BOOTARGS "console=ttyS0,19200" |
| #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF |
| #define CONFIG_NETMASK 255.255.255.0 |
| #define CONFIG_IPADDR 192.168.1.56 |
| #define CONFIG_SERVERIP 192.168.1.2 |
| #define CONFIG_BOOTCOMMAND "bootm 0x40000" |
| #define CONFIG_SHOW_BOOT_PROGRESS |
| |
| #define CONFIG_CMDLINE_TAG 1 |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (256*1024) |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* load kernel to this address */ |
| |
| #define CONFIG_SYS_HZ 1000 |
| /* RS: the oscillator is actually 3680130?? */ |
| |
| #define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ |
| /* 0101000001 */ |
| /* ^^^^^ Memory Speed 99.53 MHz */ |
| /* ^^ Run Mode Speed = 2x Mem Speed */ |
| /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ |
| |
| #define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ |
| |
| /* valid baudrates */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /* |
| * I2C bus |
| */ |
| #define CONFIG_HARD_I2C 1 |
| #define CONFIG_SYS_I2C_SPEED 50000 |
| #define CONFIG_SYS_I2C_SLAVE 0xfe |
| |
| #define CONFIG_ENV_IS_IN_EEPROM 1 |
| |
| #define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ |
| #define CONFIG_ENV_SIZE 1024 /* 1 KiB */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */ |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of address */ |
| #define CONFIG_SYS_EEPROM_SIZE 4096 /* size in bytes */ |
| #define CONFIG_SYS_I2C_INIT_BOARD 1 /* board has it's own init */ |
| |
| /* |
| * SMSC91C111 Network Card |
| */ |
| #define CONFIG_DRIVER_SMC91111 1 |
| #define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */ |
| #undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ |
| #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ |
| #define CONFIG_SMC_AUTONEG_TIMEOUT 10 /* timeout 10 seconds */ |
| #undef CONFIG_SHOW_ACTIVITY |
| #define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ |
| |
| /* |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /* |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ |
| |
| #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ |
| #define CONFIG_SYS_DRAM_SIZE 0x04000000 |
| |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| |
| /* |
| * JFFS2 partitions |
| * |
| */ |
| /* development flash */ |
| #define CONFIG_MTD_INNOKOM_16MB 1 |
| #undef CONFIG_MTD_INNOKOM_64MB |
| |
| /* production flash */ |
| /* |
| #define CONFIG_MTD_INNOKOM_64MB 1 |
| #undef CONFIG_MTD_INNOKOM_16MB |
| */ |
| |
| /* No command line, one static partition, whole device */ |
| #undef CONFIG_CMD_MTDPARTS |
| #define CONFIG_JFFS2_DEV "nor0" |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #define CONFIG_JFFS2_PART_OFFSET 0x00000000 |
| |
| /* mtdparts command line support */ |
| /* Note: fake mtd_id used, no linux mtd map file */ |
| /* |
| #define CONFIG_CMD_MTDPARTS |
| #define MTDIDS_DEFAULT "nor0=innokom-0" |
| */ |
| |
| /* development flash */ |
| /* |
| #define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)" |
| */ |
| |
| /* production flash */ |
| /* |
| #define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)" |
| */ |
| |
| /* |
| * GPIO settings |
| * |
| * GP15 == nCS1 is 1 |
| * GP24 == SFRM is 1 |
| * GP25 == TXD is 1 |
| * GP33 == nCS5 is 1 |
| * GP39 == FFTXD is 1 |
| * GP41 == RTS is 1 |
| * GP47 == TXD is 1 |
| * GP49 == nPWE is 1 |
| * GP62 == LED_B is 1 |
| * GP63 == TDM_OE is 1 |
| * GP78 == nCS2 is 1 |
| * GP79 == nCS3 is 1 |
| * GP80 == nCS4 is 1 |
| */ |
| #define CONFIG_SYS_GPSR0_VAL 0x03008000 |
| #define CONFIG_SYS_GPSR1_VAL 0xC0028282 |
| #define CONFIG_SYS_GPSR2_VAL 0x0001C000 |
| |
| /* GP02 == DON_RST is 0 |
| * GP23 == SCLK is 0 |
| * GP45 == USB_ACT is 0 |
| * GP60 == PLLEN is 0 |
| * GP61 == LED_A is 0 |
| * GP73 == SWUPD_LED is 0 |
| */ |
| #define CONFIG_SYS_GPCR0_VAL 0x00800004 |
| #define CONFIG_SYS_GPCR1_VAL 0x30002000 |
| #define CONFIG_SYS_GPCR2_VAL 0x00000100 |
| |
| /* GP00 == DON_READY is input |
| * GP01 == DON_OK is input |
| * GP02 == DON_RST is output |
| * GP03 == RESET_IND is input |
| * GP07 == RES11 is input |
| * GP09 == RES12 is input |
| * GP11 == SWUPDATE is input |
| * GP14 == nPOWEROK is input |
| * GP15 == nCS1 is output |
| * GP17 == RES22 is input |
| * GP18 == RDY is input |
| * GP23 == SCLK is output |
| * GP24 == SFRM is output |
| * GP25 == TXD is output |
| * GP26 == RXD is input |
| * GP32 == RES21 is input |
| * GP33 == nCS5 is output |
| * GP34 == FFRXD is input |
| * GP35 == CTS is input |
| * GP39 == FFTXD is output |
| * GP41 == RTS is output |
| * GP42 == USB_OK is input |
| * GP45 == USB_ACT is output |
| * GP46 == RXD is input |
| * GP47 == TXD is output |
| * GP49 == nPWE is output |
| * GP58 == nCPUBUSINT is input |
| * GP59 == LANINT is input |
| * GP60 == PLLEN is output |
| * GP61 == LED_A is output |
| * GP62 == LED_B is output |
| * GP63 == TDM_OE is output |
| * GP64 == nDSPINT is input |
| * GP65 == STRAP0 is input |
| * GP67 == STRAP1 is input |
| * GP69 == STRAP2 is input |
| * GP70 == STRAP3 is input |
| * GP71 == STRAP4 is input |
| * GP73 == SWUPD_LED is output |
| * GP78 == nCS2 is output |
| * GP79 == nCS3 is output |
| * GP80 == nCS4 is output |
| */ |
| #define CONFIG_SYS_GPDR0_VAL 0x03808004 |
| #define CONFIG_SYS_GPDR1_VAL 0xF002A282 |
| #define CONFIG_SYS_GPDR2_VAL 0x0001C200 |
| |
| /* GP15 == nCS1 is AF10 |
| * GP18 == RDY is AF01 |
| * GP23 == SCLK is AF10 |
| * GP24 == SFRM is AF10 |
| * GP25 == TXD is AF10 |
| * GP26 == RXD is AF01 |
| * GP33 == nCS5 is AF10 |
| * GP34 == FFRXD is AF01 |
| * GP35 == CTS is AF01 |
| * GP39 == FFTXD is AF10 |
| * GP41 == RTS is AF10 |
| * GP46 == RXD is AF10 |
| * GP47 == TXD is AF01 |
| * GP49 == nPWE is AF10 |
| * GP78 == nCS2 is AF10 |
| * GP79 == nCS3 is AF10 |
| * GP80 == nCS4 is AF10 |
| */ |
| #define CONFIG_SYS_GAFR0_L_VAL 0x80000000 |
| #define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 |
| #define CONFIG_SYS_GAFR1_L_VAL 0x60088058 |
| #define CONFIG_SYS_GAFR1_U_VAL 0x00000008 |
| #define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 |
| #define CONFIG_SYS_GAFR2_U_VAL 0x00000002 |
| |
| |
| /* FIXME: set GPIO_RER/FER */ |
| |
| /* RDH = 1 |
| * PH = 1 |
| * VFS = 1 |
| * BFS = 1 |
| * SSS = 1 |
| */ |
| #define CONFIG_SYS_PSSR_VAL 0x37 |
| |
| /* |
| * Memory settings |
| * |
| * This is the configuration for nCS0/1 -> flash banks |
| * configuration for nCS1: |
| * [31] 0 - Slower Device |
| * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns |
| * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns |
| * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns |
| * [19] 1 - 16 Bit bus width |
| * [18:16] 000 - nonburst RAM or FLASH |
| * configuration for nCS0: |
| * [15] 0 - Slower Device |
| * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns |
| * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns |
| * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns |
| * [03] 1 - 16 Bit bus width |
| * [02:00] 000 - nonburst RAM or FLASH |
| */ |
| #define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ |
| |
| /* This is the configuration for nCS2/3 -> TDM-Switch, DSP |
| * configuration for nCS3: DSP |
| * [31] 0 - Slower Device |
| * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns |
| * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns |
| * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns |
| * [19] 1 - 16 Bit bus width |
| * [18:16] 100 - variable latency I/O |
| * configuration for nCS2: TDM-Switch |
| * [15] 0 - Slower Device |
| * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns |
| * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns |
| * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns |
| * [03] 1 - 16 Bit bus width |
| * [02:00] 100 - variable latency I/O |
| */ |
| #define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ |
| |
| /* This is the configuration for nCS4/5 -> ExtBus, LAN Controller |
| * |
| * configuration for nCS5: LAN Controller |
| * [31] 0 - Slower Device |
| * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns |
| * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns |
| * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns |
| * [19] 1 - 16 Bit bus width |
| * [18:16] 100 - variable latency I/O |
| * configuration for nCS4: ExtBus |
| * [15] 0 - Slower Device |
| * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns |
| * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns |
| * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns |
| * [03] 1 - 16 Bit bus width |
| * [02:00] 100 - variable latency I/O |
| */ |
| #define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ |
| |
| /* MDCNFG: SDRAM Configuration Register |
| * |
| * [31:29] 000 - reserved |
| * [28] 0 - no SA1111 compatiblity mode |
| * [27] 0 - latch return data with return clock |
| * [26] 0 - alternate addressing for pair 2/3 |
| * [25:24] 00 - timings |
| * [23] 0 - internal banks in lower partition 2/3 (not used) |
| * [22:21] 00 - row address bits for partition 2/3 (not used) |
| * [20:19] 00 - column address bits for partition 2/3 (not used) |
| * [18] 0 - SDRAM partition 2/3 width is 32 bit |
| * [17] 0 - SDRAM partition 3 disabled |
| * [16] 0 - SDRAM partition 2 disabled |
| * [15:13] 000 - reserved |
| * [12] 1 - SA1111 compatiblity mode |
| * [11] 1 - latch return data with return clock |
| * [10] 0 - no alternate addressing for pair 0/1 |
| * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk |
| * [7] 1 - 4 internal banks in lower partition pair |
| * [06:05] 10 - 13 row address bits for partition 0/1 |
| * [04:03] 01 - 9 column address bits for partition 0/1 |
| * [02] 0 - SDRAM partition 0/1 width is 32 bit |
| * [01] 0 - disable SDRAM partition 1 |
| * [00] 1 - enable SDRAM partition 0 |
| */ |
| /* use the configuration above but disable partition 0 */ |
| #define CONFIG_SYS_MDCNFG_VAL 0x000019c8 |
| |
| /* MDREFR: SDRAM Refresh Control Register |
| * |
| * [32:26] 0 - reserved |
| * [25] 0 - K2FREE: not free running |
| * [24] 0 - K1FREE: not free running |
| * [23] 1 - K0FREE: not free running |
| * [22] 0 - SLFRSH: self refresh disabled |
| * [21] 0 - reserved |
| * [20] 0 - APD: no auto power down |
| * [19] 0 - K2DB2: SDCLK2 is MemClk |
| * [18] 0 - K2RUN: disable SDCLK2 |
| * [17] 0 - K1DB2: SDCLK1 is MemClk |
| * [16] 1 - K1RUN: enable SDCLK1 |
| * [15] 1 - E1PIN: SDRAM clock enable |
| * [14] 1 - K0DB2: SDCLK0 is MemClk |
| * [13] 0 - K0RUN: disable SDCLK0 |
| * [12] 1 - E0PIN: disable SDCKE0 |
| * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 |
| */ |
| #define CONFIG_SYS_MDREFR_VAL 0x0081D018 |
| |
| /* MDMRS: Mode Register Set Configuration Register |
| * |
| * [31] 0 - reserved |
| * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) |
| * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) |
| * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) |
| * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) |
| * [15] 0 - reserved |
| * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. |
| * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. |
| * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. |
| * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. |
| */ |
| #define CONFIG_SYS_MDMRS_VAL 0x00020022 |
| |
| /* |
| * PCMCIA and CF Interfaces |
| */ |
| #define CONFIG_SYS_MECR_VAL 0x00000000 |
| #define CONFIG_SYS_MCMEM0_VAL 0x00000000 |
| #define CONFIG_SYS_MCMEM1_VAL 0x00000000 |
| #define CONFIG_SYS_MCATT0_VAL 0x00000000 |
| #define CONFIG_SYS_MCATT1_VAL 0x00000000 |
| #define CONFIG_SYS_MCIO0_VAL 0x00000000 |
| #define CONFIG_SYS_MCIO1_VAL 0x00000000 |
| |
| /* |
| #define CSB226_USER_LED0 0x00000008 |
| #define CSB226_USER_LED1 0x00000010 |
| #define CSB226_USER_LED2 0x00000020 |
| */ |
| |
| /* |
| * FLASH and environment organization |
| */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ |
| |
| /* timeout values are in ticks */ |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ |
| |
| #endif /* __CONFIG_H */ |
