| /* |
| * (C) Copyright 2002 ELTEC Elektronik AG |
| * Frank Gottschling <fgottschling@eltec.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * board/config.h - configuration options, board specific |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define GTREGREAD(x) 0xffffffff /* needed for debug */ |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| /* these hardware addresses are pretty bogus, please change them to |
| suit your needs */ |
| |
| /* first ethernet */ |
| #define CONFIG_ETHADDR 00:00:5b:ee:de:ad |
| |
| #define CONFIG_IPADDR 192.168.0.105 |
| #define CONFIG_SERVERIP 192.168.0.100 |
| |
| #define CONFIG_BAB7xx 1 /* this is an BAB740/BAB750 board */ |
| |
| #define CONFIG_BAUDRATE 9600 /* console baudrate */ |
| |
| #undef CONFIG_WATCHDOG |
| |
| #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
| |
| #define CONFIG_ZERO_BOOTDELAY_CHECK |
| |
| #undef CONFIG_BOOTARGS |
| #define CONFIG_BOOTCOMMAND \ |
| "bootp 1000000; " \ |
| "setenv bootargs root=ramfs console=ttyS00,9600 " \ |
| "ip=${ipaddr}:${serverip}:${rootpath}:${gatewayip}:" \ |
| "${netmask}:${hostname}:eth0:none; " \ |
| "bootm" |
| |
| #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #define CONFIG_BOOTP_BOOTPATH |
| |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_PCI |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_SCSI |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_FDC |
| #define CONFIG_CMD_ELF |
| |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| |
| /* |
| * choose between COM1 and COM2 as serial console |
| */ |
| #define CONFIG_CONS_INDEX 1 |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ |
| |
| #define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */ |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } |
| |
| /* |
| * Low Level Configuration Settings |
| * (address mappings, register initial values, etc.) |
| * You should know what you are doing if you make changes here. |
| */ |
| #define CONFIG_SYS_BOARD_ASM_INIT |
| #define CONFIG_MISC_INIT_R |
| |
| /* |
| * Choose the address mapping scheme for the MPC106 mem controller. |
| * Default is mapping B (CHRP), set this define to choose mapping A (PReP). |
| */ |
| #define CONFIG_SYS_ADDRESS_MAP_A |
| #ifdef CONFIG_SYS_ADDRESS_MAP_A |
| |
| #define CONFIG_SYS_PCI_MEMORY_BUS 0x80000000 |
| #define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 |
| #define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 |
| |
| #define CONFIG_SYS_PCI_MEM_BUS 0x00000000 |
| #define CONFIG_SYS_PCI_MEM_PHYS 0xc0000000 |
| #define CONFIG_SYS_PCI_MEM_SIZE 0x3f000000 |
| |
| #define CONFIG_SYS_ISA_MEM_BUS 0 |
| #define CONFIG_SYS_ISA_MEM_PHYS 0 |
| #define CONFIG_SYS_ISA_MEM_SIZE 0 |
| |
| #define CONFIG_SYS_PCI_IO_BUS 0x1000 |
| #define CONFIG_SYS_PCI_IO_PHYS 0x81000000 |
| #define CONFIG_SYS_PCI_IO_SIZE 0x01000000-CONFIG_SYS_PCI_IO_BUS |
| |
| #define CONFIG_SYS_ISA_IO_BUS 0x00000000 |
| #define CONFIG_SYS_ISA_IO_PHYS 0x80000000 |
| #define CONFIG_SYS_ISA_IO_SIZE 0x00800000 |
| |
| #else |
| |
| #define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 |
| #define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 |
| #define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000 |
| |
| #define CONFIG_SYS_PCI_MEM_BUS 0x80000000 |
| #define CONFIG_SYS_PCI_MEM_PHYS 0x80000000 |
| #define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000 |
| |
| #define CONFIG_SYS_ISA_MEM_BUS 0x00000000 |
| #define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000 |
| #define CONFIG_SYS_ISA_MEM_SIZE 0x01000000 |
| |
| #define CONFIG_SYS_PCI_IO_BUS 0x00800000 |
| #define CONFIG_SYS_PCI_IO_PHYS 0xfe800000 |
| #define CONFIG_SYS_PCI_IO_SIZE 0x00400000 |
| |
| #define CONFIG_SYS_ISA_IO_BUS 0x00000000 |
| #define CONFIG_SYS_ISA_IO_PHYS 0xfe000000 |
| #define CONFIG_SYS_ISA_IO_SIZE 0x00800000 |
| |
| #endif /*CONFIG_SYS_ADDRESS_MAP_A */ |
| |
| #define CONFIG_SYS_60X_PCI_MEM_OFFSET 0x00000000 |
| |
| /* driver defines FDC,IDE,... */ |
| #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS |
| #define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS |
| #define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS |
| |
| /* |
| * Start addresses for the final memory configuration |
| * (Set up by the startup code) |
| * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
| */ |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_FLASH_BASE 0xfff00000 |
| |
| /* |
| * Definitions for initial stack pointer and data area |
| */ |
| #define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ |
| #define CONFIG_SYS_INIT_RAM_END 0x4000 |
| #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| /* |
| * Flash mapping/organization on the MPC10x. |
| */ |
| #define FLASH_BASE0_PRELIM 0xff800000 |
| #define FLASH_BASE1_PRELIM 0xffc00000 |
| |
| #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ |
| |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
| |
| /* |
| * JFFS2 partitions |
| * |
| */ |
| /* No command line, one static partition */ |
| #undef CONFIG_CMD_MTDPARTS |
| #define CONFIG_JFFS2_DEV "nor" |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #define CONFIG_JFFS2_PART_OFFSET 0x00000000 |
| |
| /* mtdparts command line support |
| * |
| * Note: fake mtd_id used, no linux mtd map file |
| */ |
| /* |
| #define CONFIG_CMD_MTDPARTS |
| #define MTDIDS_DEFAULT "nor0=bab7xx-0" |
| #define MTDPARTS_DEFAULT "mtdparts=bab7xx-0:-(jffs2)" |
| */ |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ |
| #define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */ |
| #undef CONFIG_SYS_MEMTEST |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ |
| #define CONFIG_SYS_NVRAM_SIZE 0x1ff0 /* NVRAM size (8kB), we must protect the clock data (16 bytes) */ |
| #define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */ |
| /* |
| * We store the environment and an image of revision eeprom in the upper part of the NVRAM. Thus, |
| * user applications can use the remaining space for other purposes. |
| */ |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_SIZE +0x10 -0x800) |
| #define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_SYS_NVRAM_SIZE +0x10 -0x400) |
| #define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* This board needs a special routine to access the NVRAM */ |
| #define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */ |
| |
| /* |
| * Serial devices |
| */ |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK 1843200 |
| #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE) |
| #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE) |
| |
| /* |
| * PCI stuff |
| */ |
| #define CONFIG_PCI /* include pci support */ |
| #define CONFIG_PCI_PNP /* pci plug-and-play */ |
| #define CONFIG_PCI_HOST PCI_HOST_AUTO |
| #undef CONFIG_PCI_SCAN_SHOW |
| |
| /* |
| * Video console (graphic: SMI LynxEM, keyboard: i8042) |
| */ |
| #define CONFIG_VIDEO |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_VIDEO_SMI_LYNXEM |
| #define CONFIG_I8042_KBD |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_CONSOLE_TIME |
| #define CONFIG_CONSOLE_EXTRA_INFO |
| #define CONFIG_CONSOLE_CURSOR |
| #define CONFIG_SYS_CONSOLE_BLINK_COUNT 30000 /* approx. 2 HZ */ |
| |
| /* |
| * IDE/SCSI globals |
| */ |
| #ifndef __ASSEMBLY__ |
| extern unsigned int eltec_board; |
| extern unsigned int ata_reset_time; |
| extern unsigned int scsi_reset_time; |
| extern unsigned short scsi_dev_id; |
| extern unsigned int scsi_max_scsi_id; |
| extern unsigned char scsi_sym53c8xx_ccf; |
| #endif |
| |
| /* |
| * ATAPI Support (experimental) |
| */ |
| #define CONFIG_ATAPI |
| #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */ |
| #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ |
| |
| #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_60X_PCI_IO_OFFSET /* base address */ |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1F0 /* default ide0 offste */ |
| #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 /* default ide1 offset */ |
| #define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ |
| #define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ |
| #define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ |
| |
| #define ATA_RESET_TIME (ata_reset_time) |
| |
| #undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */ |
| #undef CONFIG_IDE_LED /* no led for ide supported */ |
| |
| /* |
| * SCSI support (experimental) only SYM53C8xx supported |
| */ |
| #define CONFIG_SCSI_SYM53C8XX |
| #define CONFIG_SCSI_DEV_ID (scsi_dev_id) /* 875 or 860 */ |
| #define CONFIG_SYS_SCSI_SYM53C8XX_CCF (scsi_sym53c8xx_ccf) /* value for none 40 mhz clocks */ |
| #define CONFIG_SYS_SCSI_MAX_LUN 8 /* number of supported LUNs */ |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID (scsi_max_scsi_id) /* max SCSI ID (0-6) */ |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (15 * CONFIG_SYS_SCSI_MAX_LUN) /* max. Target devices */ |
| #define CONFIG_SYS_SCSI_SPIN_UP_TIME (scsi_reset_time) |
| |
| /* |
| * Partion suppport |
| */ |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_MAC_PARTITION |
| #define CONFIG_ISO_PARTITION |
| |
| /* |
| * Winbond Configuration |
| */ |
| #define CONFIG_WINBOND_83C553 1 /* has a winbond bridge */ |
| #define CONFIG_SYS_USE_WINBOND_IDE 0 /* use winbond 83c553 internal ide */ |
| #define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /* pci-isa bridge config addr */ |
| #define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /* ide config addr */ |
| |
| /* |
| * NS87308 Configuration |
| */ |
| #define CONFIG_NS87308 /* Nat Semi super-io cntr on ISA bus */ |
| #define CONFIG_SYS_NS87308_BADDR_10 1 |
| #define CONFIG_SYS_NS87308_DEVS (CONFIG_SYS_NS87308_UART1 | \ |
| CONFIG_SYS_NS87308_UART2 | \ |
| CONFIG_SYS_NS87308_KBC1 | \ |
| CONFIG_SYS_NS87308_MOUSE | \ |
| CONFIG_SYS_NS87308_FDC | \ |
| CONFIG_SYS_NS87308_RARP | \ |
| CONFIG_SYS_NS87308_GPIO | \ |
| CONFIG_SYS_NS87308_POWRMAN | \ |
| CONFIG_SYS_NS87308_RTC_APC ) |
| |
| #define CONFIG_SYS_NS87308_PS2MOD |
| #define CONFIG_SYS_NS87308_GPIO_BASE 0x0220 |
| #define CONFIG_SYS_NS87308_PWMAN_BASE 0x0460 |
| #define CONFIG_SYS_NS87308_PMC2 0x00 /* SuperI/O clock source is 24MHz via X1 */ |
| |
| /* |
| * set up the NVRAM access registers |
| * NVRAM's controlled by the configurable CS line from the 87308 |
| */ |
| #define CONFIG_SYS_NS87308_CS0_BASE 0x0076 |
| #define CONFIG_SYS_NS87308_CS0_CONF 0x40 |
| #define CONFIG_SYS_NS87308_CS1_BASE 0x0070 |
| #define CONFIG_SYS_NS87308_CS1_CONF 0x1C |
| #define CONFIG_SYS_NS87308_CS2_BASE 0x0071 |
| #define CONFIG_SYS_NS87308_CS2_CONF 0x1C |
| |
| #define CONFIG_RTC_MK48T59 |
| |
| /* |
| * Initial BATs |
| */ |
| #if 1 |
| |
| #define CONFIG_SYS_IBAT0L 0 |
| #define CONFIG_SYS_IBAT0U 0 |
| #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L |
| #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U |
| |
| #define CONFIG_SYS_IBAT1L 0 |
| #define CONFIG_SYS_IBAT1U 0 |
| #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L |
| #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U |
| |
| #define CONFIG_SYS_IBAT2L 0 |
| #define CONFIG_SYS_IBAT2U 0 |
| #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L |
| #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U |
| |
| #define CONFIG_SYS_IBAT3L 0 |
| #define CONFIG_SYS_IBAT3U 0 |
| #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L |
| #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U |
| |
| #else |
| |
| /* SDRAM */ |
| #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW) |
| #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L |
| #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U |
| |
| /* address range for flashes */ |
| #define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L |
| #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U |
| |
| /* ISA IO space */ |
| #define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L |
| #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U |
| |
| /* ISA memory space */ |
| #define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L |
| #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U |
| |
| #endif |
| |
| /* |
| * Speed settings are board specific |
| */ |
| #ifndef __ASSEMBLY__ |
| extern unsigned long bab7xx_get_bus_freq (void); |
| extern unsigned long bab7xx_get_gclk_freq (void); |
| #endif |
| #define CONFIG_SYS_BUS_HZ bab7xx_get_bus_freq() |
| #define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ |
| #define CONFIG_SYS_CPU_CLK bab7xx_get_gclk_freq() |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
| |
| /* |
| * Cache Configuration |
| */ |
| #define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| /* |
| * L2 Cache Configuration is board specific for BAB740/BAB750 |
| * Init values read from revision srom. |
| */ |
| #undef CONFIG_SYS_L2 |
| #define L2_INIT (L2CR_L2SIZ_HM | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ |
| L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) |
| #define L2_ENABLE (L2_INIT | L2CR_L2E) |
| |
| #define CONFIG_SYS_L2_BAB7xx |
| |
| /* |
| * Internal Definitions |
| * |
| * Boot Flags |
| */ |
| #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
| #define BOOTFLAG_WARM 0x02 /* Software reboot */ |
| |
| |
| #define CONFIG_NET_MULTI /* Multi ethernet cards support */ |
| #define CONFIG_TULIP |
| #define CONFIG_TULIP_SELECT_MEDIA |
| |
| #endif /* __CONFIG_H */ |
