blob: f5a3d3ac386ceabe492e91c8ba6bab56a6938cec [file] [log] [blame]
/*
* Startup Code for S3C44B0 CPU-core
*
* (C) Copyright 2004
* DAVE Srl
*
* http://www.dave-tech.it
* http://www.wawnet.biz
* mailto:info@wawnet.biz
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
/*
* Jump vector table
*/
.globl _start
_start: b reset
add pc, pc, #0x0c000000
add pc, pc, #0x0c000000
add pc, pc, #0x0c000000
add pc, pc, #0x0c000000
add pc, pc, #0x0c000000
add pc, pc, #0x0c000000
add pc, pc, #0x0c000000
.balignl 16,0xdeadbeef
/*
*************************************************************************
*
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
* relocate u-boot to ram
* setup stack
* jump to second stage
*
*************************************************************************
*/
_TEXT_BASE:
.word TEXT_BASE
.globl _armboot_start
_armboot_start:
.word _start
/*
* These are defined in the board-specific linker script.
*/
.globl _bss_start
_bss_start:
.word __bss_start
.globl _bss_end
_bss_end:
.word _end
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
IRQ_STACK_START:
.word 0x0badc0de
/* IRQ stack memory (calculated at run-time) */
.globl FIQ_STACK_START
FIQ_STACK_START:
.word 0x0badc0de
#endif
/*
* the actual reset code
*/
reset:
/*
* set the cpu to SVC32 mode
*/
mrs r0,cpsr
bic r0,r0,#0x1f
orr r0,r0,#0x13
msr cpsr,r0
/*
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
bl cpu_init_crit
/*
* before relocating, we have to setup RAM timing
* because memory timing is board-dependend, you will
* find a lowlevel_init.S in your board directory.
*/
bl lowlevel_init
#endif
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
cmp r0, r1 /* don't reloc during debug */
beq stack_setup
ldr r2, _armboot_start
ldr r3, _bss_start
sub r2, r3, r2 /* r2 <- size of armboot */
add r2, r0, r2 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
/*
now copy to sram the interrupt vector
*/
adr r0, real_vectors
add r2, r0, #1024
ldr r1, =0x0c000000
add r1, r1, #0x08
vector_copy_loop:
ldmia r0!, {r3-r10}
stmia r1!, {r3-r10}
cmp r0, r2
ble vector_copy_loop
#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
sub sp, r0, #12 /* leave 3 words for abort-stack */
ldr pc, _start_armboot
_start_armboot: .word start_armboot
/*
*************************************************************************
*
* CPU_init_critical registers
*
* setup important registers
* setup memory timing
*
*************************************************************************
*/
#define INTCON (0x01c00000+0x200000)
#define INTMSK (0x01c00000+0x20000c)
#define LOCKTIME (0x01c00000+0x18000c)
#define PLLCON (0x01c00000+0x180000)
#define CLKCON (0x01c00000+0x180004)
#define WTCON (0x01c00000+0x130000)
cpu_init_crit:
/* disable watch dog */
ldr r0, =WTCON
ldr r1, =0x0
str r1, [r0]
/*
* mask all IRQs by clearing all bits in the INTMRs
*/
ldr r1,=INTMSK
ldr r0, =0x03fffeff
str r0, [r1]
ldr r1, =INTCON
ldr r0, =0x05
str r0, [r1]
/* Set Clock Control Register */
ldr r1, =LOCKTIME
ldrb r0, =800
strb r0, [r1]
ldr r1, =PLLCON
#if CONFIG_S3C44B0_CLOCK_SPEED==66
ldr r0, =0x34031 /* 66MHz (Quartz=11MHz) */
#elif CONFIG_S3C44B0_CLOCK_SPEED==75
ldr r0, =0x610c1 /*B2: Xtal=20mhz Fclk=75MHz */
#else
# error CONFIG_S3C44B0_CLOCK_SPEED undefined
#endif
str r0, [r1]
ldr r1,=CLKCON
ldr r0, =0x7ff8
str r0, [r1]
mov pc, lr
/*************************************************/
/* interrupt vectors */
/*************************************************/
real_vectors:
b reset
b undefined_instruction
b software_interrupt
b prefetch_abort
b data_abort
b not_used
b irq
b fiq
/*************************************************/
undefined_instruction:
mov r6, #3
b reset
software_interrupt:
mov r6, #4
b reset
prefetch_abort:
mov r6, #5
b reset
data_abort:
mov r6, #6
b reset
not_used:
/* we *should* never reach this */
mov r6, #7
b reset
irq:
mov r6, #8
b reset
fiq:
mov r6, #9
b reset