/*
**=====================================================================
**
** Copyright (C) 2000, 2001, 2002, 2003
** The LEOX team <team@leox.org>, http://www.leox.org
**
** LEOX.org is about the development of free hardware and software resources
**   for system on chip.
**
** Description: U-Boot port on the LEOX's ELPT860 CPU board
** ~~~~~~~~~~~
**
**=====================================================================
**
** This program is free software; you can redistribute it and/or
** modify it under the terms of the GNU General Public License as
** published by the Free Software Foundation; either version 2 of
** the License, or (at your option) any later version.
**
** This program is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with this program; if not, write to the Free Software
** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
** MA 02111-1307 USA
**
**=====================================================================
*/

OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
   __DYNAMIC = 0;    */
SECTIONS
{
  /* Read-only sections, merged into text segment: */
  . = + SIZEOF_HEADERS;
  .interp : { *(.interp) }
  .hash          : { *(.hash)		}
  .dynsym        : { *(.dynsym)		}
  .dynstr        : { *(.dynstr)		}
  .rel.text      : { *(.rel.text)		}
  .rela.text     : { *(.rela.text)	}
  .rel.data      : { *(.rel.data)		}
  .rela.data     : { *(.rela.data)	}
  .rel.rodata    : { *(.rel.rodata)	}
  .rela.rodata   : { *(.rela.rodata)	}
  .rel.got       : { *(.rel.got)		}
  .rela.got      : { *(.rela.got)		}
  .rel.ctors     : { *(.rel.ctors)	}
  .rela.ctors    : { *(.rela.ctors)	}
  .rel.dtors     : { *(.rel.dtors)	}
  .rela.dtors    : { *(.rela.dtors)	}
  .rel.bss       : { *(.rel.bss)		}
  .rela.bss      : { *(.rela.bss)		}
  .rel.plt       : { *(.rel.plt)		}
  .rela.plt      : { *(.rela.plt)		}
  .init          : { *(.init)	}
  .plt : { *(.plt) }
  .text      :
  {
    /* WARNING - the following is hand-optimized to fit within	*/
    /* the sector layout of our flash chips!	XXX FIXME XXX	*/

    cpu/mpc8xx/start.o		(.text)
    common/dlmalloc.o		(.text)
    lib_generic/vsprintf.o	(.text)
    lib_generic/crc32.o		(.text)

    . = env_offset;
    common/env_embedded.o	(.text)

    *(.text)
    *(.fixup)
    *(.got1)
  }
  _etext = .;
  PROVIDE (etext = .);
  .rodata    :
  {
    *(.rodata)
    *(.rodata1)
    *(.rodata.str1.4)
    *(.eh_frame)
  }
  .fini      : { *(.fini)    } =0
  .ctors     : { *(.ctors)   }
  .dtors     : { *(.dtors)   }

  /* Read-write section, merged into data segment: */
  . = (. + 0x0FFF) & 0xFFFFF000;
  _erotext = .;
  PROVIDE (erotext = .);
  .reloc   :
  {
    *(.got)
    _GOT2_TABLE_ = .;
    *(.got2)
    _FIXUP_TABLE_ = .;
    *(.fixup)
  }
  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
  __fixup_entries = (. - _FIXUP_TABLE_)>>2;

  .data    :
  {
    *(.data)
    *(.data1)
    *(.sdata)
    *(.sdata2)
    *(.dynamic)
    CONSTRUCTORS
  }
  _edata  =  .;
  PROVIDE (edata = .);

  __start___ex_table = .;
  __ex_table : { *(__ex_table) }
  __stop___ex_table = .;

  . = ALIGN(4096);
  __init_begin = .;
  .text.init : { *(.text.init) }
  .data.init : { *(.data.init) }
  . = ALIGN(4096);
  __init_end = .;

  __bss_start = .;
  .bss       :
  {
   *(.sbss) *(.scommon)
   *(.dynbss)
   *(.bss)
   *(COMMON)
  }
  _end = . ;
  PROVIDE (end = .);
}