#include <Copyright.h>

/********************************************************************************
* gtPriTable.c
*
* DESCRIPTION:
*       API definitions for Priority Override Table
*
* DEPENDENCIES:
*
* FILE REVISION NUMBER:
*       $Revision: $
*******************************************************************************/

#include <msApi.h>
#include <gtSem.h>
#include <gtHwCntl.h>
#include <gtDrvSwRegs.h>


/*******************************************************************************
* gsysSetQPriOverrideTable
*
* DESCRIPTION:
*       Queue Priority Override.
*        When a frame enters a port, its type is determined and the type is used
*        to access the Queue Priority Table. If the type's qPriEn (in GT_QPRI_TBL_ENTRY
*        structure) is enabled, then the frame's Queue Priority will be overridden
*        with the value written in qPriority (in GT_QPRI_TBL_ENTRY structure).
*        Frame Types supported are:
*            FTYPE_DSA_TO_CPU_BPDU -
*                Used on multicast DSA To_CPU frames with a Code of 0x0 (BPDU/MGMT).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_F2R -
*                Used on DSA To_CPU frames with a Code of 0x1 (Frame to Register
*                Reply). Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_IGMP -
*                Used on DSA To_CPU frames with a Code of 0x2 (IGMP/MLD Trap)
*                and on non-DSA Control frames that are IGMP or MLD trapped
*            FTYPE_DSA_TO_CPU_TRAP -
*                Used on DSA To_CPU frames with a Code of 0x3 (Policy Trap) and
*                on non-DSA Control frames that are Policy Trapped
*            FTYPE_DSA_TO_CPU_ARP -
*                Used on DSA To_CPU frames with a Code of 0x4 (ARP Mirror) and
*                on non-DSA Control frames that are ARP Mirrored (see gprtSetARPtoCPU API).
*            FTYPE_DSA_TO_CPU_MIRROR -
*                Used on DSA To_CPU frames with a Code of 0x5 (Policy Mirror) and
*                on non-DSA Control frames that are Policy Mirrored (see gprtSetPolicy API).
*            FTYPE_DSA_TO_CPU_RESERVED -
*                Used on DSA To_CPU frames with a Code of 0x6 (Reserved). Not
*                used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_UCAST_MGMT -
*                Used on unicast DSA To_CPU frames with a Code of 0x0 (unicast
*                MGMT). Not used on non-DSA Control frames.
*            FTYPE_DSA_FROM_CPU -
*                Used on DSA From_CPU frames. Not used on non-DSA Control frame
*            FTYPE_DSA_CROSS_CHIP_FC -
*                Used on DSA Cross Chip Flow Control frames (To_Sniffer Flow
*                Control). Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_EGRESS_MON -
*                Used on DSA Cross Chip Egress Monitor frames (To_Sniffer Tx).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_INGRESS_MON -
*                Used on DSA Cross Chip Ingress Monitor frames (To_Sniffer Rx).
*                Not used on non-DSA Control frames.
*            FTYPE_PORT_ETYPE_MATCH -
*                Used on normal network ports (see gprtSetFrameMode API)
*                on frames whose Ethertype matches the port's PortEType register.
*                Not used on non-DSA Control frames.
*            FTYPE_BCAST_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain a Broadcast
*                destination address. Not used on DSA Control frames.
*            FTYPE_PPPoE_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an Ether Type 0x8863
*                (i.e., PPPoE frames). Not used on DSA Control frames.
*            FTYPE_IP_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an IPv4 or IPv6 Ether
*                Type. Not used on DSA Control frames.
*
* INPUTS:
*       fType - frame type (GT_PRI_OVERRIDE_FTYPE)
*       entry - Q Priority Override Table entry (GT_QPRI_TBL_ENTRY)
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK      - on success
*       GT_FAIL    - on error
*        GT_BAD_PARAM     - on unknown frame type
*        GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*       None
*
*******************************************************************************/
GT_STATUS gsysSetQPriOverrideTable
(
    IN  GT_QD_DEV     *dev,
    IN  GT_PRI_OVERRIDE_FTYPE    fType,
    IN  GT_QPRI_TBL_ENTRY    *entry
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16            data,qPri;

    DBG_INFO(("gsysSetQPriOverrideTable Called.\n"));

    /* Check if Switch supports this feature. */
    if (!IS_IN_DEV_GROUP(dev,DEV_PRIORITY_OVERRIDE_TABLE))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    switch (fType)
    {
        case FTYPE_DSA_TO_CPU_BPDU:
        case FTYPE_DSA_TO_CPU_F2R:
        case FTYPE_DSA_TO_CPU_IGMP:
        case FTYPE_DSA_TO_CPU_TRAP:
        case FTYPE_DSA_TO_CPU_ARP:
        case FTYPE_DSA_TO_CPU_MIRROR:
        case FTYPE_DSA_TO_CPU_RESERVED:
        case FTYPE_DSA_TO_CPU_UCAST_MGMT:
        case FTYPE_DSA_FROM_CPU:
        case FTYPE_DSA_CROSS_CHIP_FC:
        case FTYPE_DSA_CROSS_CHIP_EGRESS_MON:
        case FTYPE_DSA_CROSS_CHIP_INGRESS_MON:
        case FTYPE_PORT_ETYPE_MATCH:
        case FTYPE_BCAST_NON_DSA_CONTROL:
        case FTYPE_PPPoE_NON_DSA_CONTROL:
        case FTYPE_IP_NON_DSA_CONTROL:
            break;
        default:
            DBG_INFO(("GT_BAD_PARAM\n"));
            return GT_BAD_PARAM;
    }

    gtSemTake(dev,dev->tblRegsSem,OS_WAIT_FOREVER);

    /* Wait until the Priority Override Table is ready. */
#ifdef GT_RMGMT_ACCESS
    {
      HW_DEV_REG_ACCESS regAccess;

      regAccess.entries = 1;

      regAccess.rw_reg_list[0].cmd = HW_REG_WAIT_TILL_0;
      regAccess.rw_reg_list[0].addr = CALC_SMI_DEV_ADDR(dev, 0, GLOBAL2_REG_ACCESS);
      regAccess.rw_reg_list[0].reg = QD_REG_PRIORITY_OVERRIDE;
      regAccess.rw_reg_list[0].data = 15;
      retVal = hwAccessMultiRegs(dev, &regAccess);
      if(retVal != GT_OK)
      {
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
      }
    }
#else
    data = 1;
    while(data == 1)
    {
        retVal = hwGetGlobal2RegField(dev,QD_REG_PRIORITY_OVERRIDE,15,1,&data);
        if(retVal != GT_OK)
        {
            gtSemGive(dev,dev->tblRegsSem);
            return retVal;
        }
    }
#endif

    if (IS_IN_DEV_GROUP(dev,DEV_QAVB_PRIORITY_OVERRIDE_TABLE))
    {
        data = fType << 8;

        retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);
        if(retVal != GT_OK)
        {
            DBG_INFO(("Failed.\n"));
            gtSemGive(dev,dev->tblRegsSem);
            return retVal;
        }

        retVal = hwReadGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, &data);
        if(retVal != GT_OK)
        {
            DBG_INFO(("Failed.\n"));
            gtSemGive(dev,dev->tblRegsSem);
            return retVal;
        }

        data &= ((1 << 7) | (3 << 4));    /* keep QPriAvb information */
    }
    else
        data = 0;

    if (entry->qPriEn)
        qPri = (GT_U16)((1 << 3) | (entry->qPriority & 0x3));
    else
        qPri = 0;

    data |= (GT_U16)((1 << 15) | (fType << 8) | qPri);

    retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);

    gtSemGive(dev,dev->tblRegsSem);

    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }

    return GT_OK;
}


/*******************************************************************************
* gsysGetQPriOverrideTable
*
* DESCRIPTION:
*       Queue Priority Override.
*        When a frame enters a port, its type is determined and the type is used
*        to access the Queue Priority Table. If the type's qPriEn (in GT_QPRI_TBL_ENTRY
*        structure) is enabled, then the frame's Queue Priority will be overridden
*        with the value written in qPriority (in GT_QPRI_TBL_ENTRY structure).
*        Frame Types supported are:
*            FTYPE_DSA_TO_CPU_BPDU -
*                Used on multicast DSA To_CPU frames with a Code of 0x0 (BPDU/MGMT).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_F2R -
*                Used on DSA To_CPU frames with a Code of 0x1 (Frame to Register
*                Reply). Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_IGMP -
*                Used on DSA To_CPU frames with a Code of 0x2 (IGMP/MLD Trap)
*                and on non-DSA Control frames that are IGMP or MLD trapped
*            FTYPE_DSA_TO_CPU_TRAP -
*                Used on DSA To_CPU frames with a Code of 0x3 (Policy Trap) and
*                on non-DSA Control frames that are Policy Trapped
*            FTYPE_DSA_TO_CPU_ARP -
*                Used on DSA To_CPU frames with a Code of 0x4 (ARP Mirror) and
*                on non-DSA Control frames that are ARP Mirrored (see gprtSetARPtoCPU API).
*            FTYPE_DSA_TO_CPU_MIRROR -
*                Used on DSA To_CPU frames with a Code of 0x5 (Policy Mirror) and
*                on non-DSA Control frames that are Policy Mirrored (see gprtSetPolicy API).
*            FTYPE_DSA_TO_CPU_RESERVED -
*                Used on DSA To_CPU frames with a Code of 0x6 (Reserved). Not
*                used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_UCAST_MGMT -
*                Used on unicast DSA To_CPU frames with a Code of 0x0 (unicast
*                MGMT). Not used on non-DSA Control frames.
*            FTYPE_DSA_FROM_CPU -
*                Used on DSA From_CPU frames. Not used on non-DSA Control frame
*            FTYPE_DSA_CROSS_CHIP_FC -
*                Used on DSA Cross Chip Flow Control frames (To_Sniffer Flow
*                Control). Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_EGRESS_MON -
*                Used on DSA Cross Chip Egress Monitor frames (To_Sniffer Tx).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_INGRESS_MON -
*                Used on DSA Cross Chip Ingress Monitor frames (To_Sniffer Rx).
*                Not used on non-DSA Control frames.
*            FTYPE_PORT_ETYPE_MATCH -
*                Used on normal network ports (see gprtSetFrameMode API)
*                on frames whose Ethertype matches the port's PortEType register.
*                Not used on non-DSA Control frames.
*            FTYPE_BCAST_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain a Broadcast
*                destination address. Not used on DSA Control frames.
*            FTYPE_PPPoE_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an Ether Type 0x8863
*                (i.e., PPPoE frames). Not used on DSA Control frames.
*            FTYPE_IP_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an IPv4 or IPv6 Ether
*                Type. Not used on DSA Control frames.
*
* INPUTS:
*       fType - frame type (GT_PRI_OVERRIDE_FTYPE)
*
* OUTPUTS:
*       entry - Q Priority Override Table entry (GT_QPRI_TBL_ENTRY)
*
* RETURNS:
*       GT_OK      - on success
*       GT_FAIL    - on error
*        GT_BAD_PARAM     - on unknown frame type
*        GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*       None
*
*******************************************************************************/
GT_STATUS gsysGetQPriOverrideTable
(
    IN  GT_QD_DEV     *dev,
    IN  GT_PRI_OVERRIDE_FTYPE    fType,
    OUT GT_QPRI_TBL_ENTRY    *entry
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16            data;

    DBG_INFO(("gsysGetQPriOverrideTable Called.\n"));

    /* Check if Switch supports this feature. */
    if (!IS_IN_DEV_GROUP(dev,DEV_PRIORITY_OVERRIDE_TABLE))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    switch (fType)
    {
        case FTYPE_DSA_TO_CPU_BPDU:
        case FTYPE_DSA_TO_CPU_F2R:
        case FTYPE_DSA_TO_CPU_IGMP:
        case FTYPE_DSA_TO_CPU_TRAP:
        case FTYPE_DSA_TO_CPU_ARP:
        case FTYPE_DSA_TO_CPU_MIRROR:
        case FTYPE_DSA_TO_CPU_RESERVED:
        case FTYPE_DSA_TO_CPU_UCAST_MGMT:
        case FTYPE_DSA_FROM_CPU:
        case FTYPE_DSA_CROSS_CHIP_FC:
        case FTYPE_DSA_CROSS_CHIP_EGRESS_MON:
        case FTYPE_DSA_CROSS_CHIP_INGRESS_MON:
        case FTYPE_PORT_ETYPE_MATCH:
        case FTYPE_BCAST_NON_DSA_CONTROL:
        case FTYPE_PPPoE_NON_DSA_CONTROL:
        case FTYPE_IP_NON_DSA_CONTROL:
            break;
        default:
            DBG_INFO(("GT_BAD_PARAM\n"));
            return GT_BAD_PARAM;
    }

    gtSemTake(dev,dev->tblRegsSem,OS_WAIT_FOREVER);

    /* Wait until the Priority Override Table is ready. */
#ifdef GT_RMGMT_ACCESS
    {
      HW_DEV_REG_ACCESS regAccess;

      regAccess.entries = 1;

      regAccess.rw_reg_list[0].cmd = HW_REG_WAIT_TILL_0;
      regAccess.rw_reg_list[0].addr = CALC_SMI_DEV_ADDR(dev, 0, GLOBAL2_REG_ACCESS);
      regAccess.rw_reg_list[0].reg = QD_REG_PRIORITY_OVERRIDE;
      regAccess.rw_reg_list[0].data = 15;
      retVal = hwAccessMultiRegs(dev, &regAccess);
      if(retVal != GT_OK)
      {
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
      }
    }
#else
    data = 1;
    while(data == 1)
    {
        retVal = hwGetGlobal2RegField(dev,QD_REG_PRIORITY_OVERRIDE,15,1,&data);
        if(retVal != GT_OK)
        {
            gtSemGive(dev,dev->tblRegsSem);
            return retVal;
        }
    }
#endif

    data = fType << 8;

    retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    retVal = hwReadGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, &data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    if (data & (1 << 3))
    {
        entry->qPriEn = GT_TRUE;
        entry->qPriority = data & 0x3;
    }
    else
    {
        entry->qPriEn = GT_FALSE;
        entry->qPriority = data & 0x3; /* no meaning, but just in case */
    }

    gtSemGive(dev,dev->tblRegsSem);

    return GT_OK;
}


/*******************************************************************************
* gsysSetFPriOverrideTable
*
* DESCRIPTION:
*         Frame Priority Override.
*        When a frame enters a port, its type is determined and the type is used
*        to access the Frame Priority Table. If the type's fPriEn (in GT_FPRI_TBL_ENTRY
*        structure) is enabled, then the frame's Frame Priority will be overridden
*        with the value written in fPriority (in GT_FPRI_TBL_ENTRY structure).
*        Frame Types supported are:
*            FTYPE_DSA_TO_CPU_BPDU -
*                Used on multicast DSA To_CPU frames with a Code of 0x0 (BPDU/MGMT).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_F2R -
*                Used on DSA To_CPU frames with a Code of 0x1 (Frame to Register
*                Reply). Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_IGMP -
*                Used on DSA To_CPU frames with a Code of 0x2 (IGMP/MLD Trap)
*                and on non-DSA Control frames that are IGMP or MLD trapped
*            FTYPE_DSA_TO_CPU_TRAP -
*                Used on DSA To_CPU frames with a Code of 0x3 (Policy Trap) and
*                on non-DSA Control frames that are Policy Trapped
*            FTYPE_DSA_TO_CPU_ARP -
*                Used on DSA To_CPU frames with a Code of 0x4 (ARP Mirror) and
*                on non-DSA Control frames that are ARP Mirrored (see gprtSetARPtoCPU API).
*            FTYPE_DSA_TO_CPU_MIRROR -
*                Used on DSA To_CPU frames with a Code of 0x5 (Policy Mirror) and
*                on non-DSA Control frames that are Policy Mirrored (see gprtSetPolicy API).
*            FTYPE_DSA_TO_CPU_RESERVED -
*                Used on DSA To_CPU frames with a Code of 0x6 (Reserved). Not
*                used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_UCAST_MGMT -
*                Used on unicast DSA To_CPU frames with a Code of 0x0 (unicast
*                MGMT). Not used on non-DSA Control frames.
*            FTYPE_DSA_FROM_CPU -
*                Used on DSA From_CPU frames. Not used on non-DSA Control frame
*            FTYPE_DSA_CROSS_CHIP_FC -
*                Used on DSA Cross Chip Flow Control frames (To_Sniffer Flow
*                Control). Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_EGRESS_MON -
*                Used on DSA Cross Chip Egress Monitor frames (To_Sniffer Tx).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_INGRESS_MON -
*                Used on DSA Cross Chip Ingress Monitor frames (To_Sniffer Rx).
*                Not used on non-DSA Control frames.
*            FTYPE_PORT_ETYPE_MATCH -
*                Used on normal network ports (see gprtSetFrameMode API)
*                on frames whose Ethertype matches the port's PortEType register.
*                Not used on non-DSA Control frames.
*            FTYPE_BCAST_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain a Broadcast
*                destination address. Not used on DSA Control frames.
*            FTYPE_PPPoE_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an Ether Type 0x8863
*                (i.e., PPPoE frames). Not used on DSA Control frames.
*            FTYPE_IP_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an IPv4 or IPv6 Ether
*                Type. Not used on DSA Control frames.
*
* INPUTS:
*       fType - frame type (GT_PRI_OVERRIDE_FTYPE)
*       entry - Frame Priority Override Table entry (GT_FPRI_TBL_ENTRY)
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK      - on success
*       GT_FAIL    - on error
*        GT_BAD_PARAM     - on unknown frame type
*        GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*       None
*
*******************************************************************************/
GT_STATUS gsysSetFPriOverrideTable
(
    IN  GT_QD_DEV     *dev,
    IN  GT_PRI_OVERRIDE_FTYPE    fType,
    IN  GT_FPRI_TBL_ENTRY    *entry
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16            data,fPri;

    DBG_INFO(("gsysSetFPriOverrideTable Called.\n"));

    /* Check if Switch supports this feature. */
    if (!IS_IN_DEV_GROUP(dev,DEV_FRAME_PRIORITY_OVERRIDE_TABLE))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    switch (fType)
    {
        case FTYPE_DSA_TO_CPU_BPDU:
        case FTYPE_DSA_TO_CPU_F2R:
        case FTYPE_DSA_TO_CPU_IGMP:
        case FTYPE_DSA_TO_CPU_TRAP:
        case FTYPE_DSA_TO_CPU_ARP:
        case FTYPE_DSA_TO_CPU_MIRROR:
        case FTYPE_DSA_TO_CPU_RESERVED:
        case FTYPE_DSA_TO_CPU_UCAST_MGMT:
        case FTYPE_DSA_FROM_CPU:
        case FTYPE_DSA_CROSS_CHIP_FC:
        case FTYPE_DSA_CROSS_CHIP_EGRESS_MON:
        case FTYPE_DSA_CROSS_CHIP_INGRESS_MON:
        case FTYPE_PORT_ETYPE_MATCH:
        case FTYPE_BCAST_NON_DSA_CONTROL:
        case FTYPE_PPPoE_NON_DSA_CONTROL:
        case FTYPE_IP_NON_DSA_CONTROL:
            break;
        default:
            DBG_INFO(("GT_BAD_PARAM\n"));
            return GT_BAD_PARAM;
    }

    gtSemTake(dev,dev->tblRegsSem,OS_WAIT_FOREVER);

    /* Wait until the Priority Override Table is ready. */
#ifdef GT_RMGMT_ACCESS
    {
      HW_DEV_REG_ACCESS regAccess;

      regAccess.entries = 1;

      regAccess.rw_reg_list[0].cmd = HW_REG_WAIT_TILL_0;
      regAccess.rw_reg_list[0].addr = CALC_SMI_DEV_ADDR(dev, 0, GLOBAL2_REG_ACCESS);
      regAccess.rw_reg_list[0].reg = QD_REG_PRIORITY_OVERRIDE;
      regAccess.rw_reg_list[0].data = 15;
      retVal = hwAccessMultiRegs(dev, &regAccess);
      if(retVal != GT_OK)
      {
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
      }
    }
#else
    data = 1;
    while(data == 1)
    {
        retVal = hwGetGlobal2RegField(dev,QD_REG_PRIORITY_OVERRIDE,15,1,&data);
        if(retVal != GT_OK)
        {
            gtSemGive(dev,dev->tblRegsSem);
            return retVal;
        }
    }
#endif

    if (entry->fPriEn)
        fPri = (GT_U16)((1 << 3) | (entry->fPriority & 0x7));
    else
        fPri = 0;

    data = (GT_U16)((1 << 15) | (fType << 8) | fPri | 0x1000);

    retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);

    gtSemGive(dev,dev->tblRegsSem);

    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }

    return GT_OK;
}


/*******************************************************************************
* gsysGetQPriOverrideTable
*
* DESCRIPTION:
*         Frame Priority Override.
*        When a frame enters a port, its type is determined and the type is used
*        to access the Frame Priority Table. If the type's fPriEn (in GT_FPRI_TBL_ENTRY
*        structure) is enabled, then the frame's Frame Priority will be overridden
*        with the value written in fPriority (in GT_FPRI_TBL_ENTRY structure).
*        Frame Types supported are:
*            FTYPE_DSA_TO_CPU_BPDU -
*                Used on multicast DSA To_CPU frames with a Code of 0x0 (BPDU/MGMT).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_F2R -
*                Used on DSA To_CPU frames with a Code of 0x1 (Frame to Register
*                Reply). Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_IGMP -
*                Used on DSA To_CPU frames with a Code of 0x2 (IGMP/MLD Trap)
*                and on non-DSA Control frames that are IGMP or MLD trapped
*            FTYPE_DSA_TO_CPU_TRAP -
*                Used on DSA To_CPU frames with a Code of 0x3 (Policy Trap) and
*                on non-DSA Control frames that are Policy Trapped
*            FTYPE_DSA_TO_CPU_ARP -
*                Used on DSA To_CPU frames with a Code of 0x4 (ARP Mirror) and
*                on non-DSA Control frames that are ARP Mirrored (see gprtSetARPtoCPU API).
*            FTYPE_DSA_TO_CPU_MIRROR -
*                Used on DSA To_CPU frames with a Code of 0x5 (Policy Mirror) and
*                on non-DSA Control frames that are Policy Mirrored (see gprtSetPolicy API).
*            FTYPE_DSA_TO_CPU_RESERVED -
*                Used on DSA To_CPU frames with a Code of 0x6 (Reserved). Not
*                used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_UCAST_MGMT -
*                Used on unicast DSA To_CPU frames with a Code of 0x0 (unicast
*                MGMT). Not used on non-DSA Control frames.
*            FTYPE_DSA_FROM_CPU -
*                Used on DSA From_CPU frames. Not used on non-DSA Control frame
*            FTYPE_DSA_CROSS_CHIP_FC -
*                Used on DSA Cross Chip Flow Control frames (To_Sniffer Flow
*                Control). Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_EGRESS_MON -
*                Used on DSA Cross Chip Egress Monitor frames (To_Sniffer Tx).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_INGRESS_MON -
*                Used on DSA Cross Chip Ingress Monitor frames (To_Sniffer Rx).
*                Not used on non-DSA Control frames.
*            FTYPE_PORT_ETYPE_MATCH -
*                Used on normal network ports (see gprtSetFrameMode API)
*                on frames whose Ethertype matches the port's PortEType register.
*                Not used on non-DSA Control frames.
*            FTYPE_BCAST_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain a Broadcast
*                destination address. Not used on DSA Control frames.
*            FTYPE_PPPoE_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an Ether Type 0x8863
*                (i.e., PPPoE frames). Not used on DSA Control frames.
*            FTYPE_IP_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an IPv4 or IPv6 Ether
*                Type. Not used on DSA Control frames.
*
* INPUTS:
*       fType - frame type (GT_PRI_OVERRIDE_FTYPE)
*
* OUTPUTS:
*       entry - Frame Priority Override Table entry (GT_FPRI_TBL_ENTRY)
*
* RETURNS:
*       GT_OK      - on success
*       GT_FAIL    - on error
*       GT_BAD_PARAM     - on unknown frame type
*       GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*       None
*
*******************************************************************************/
GT_STATUS gsysGetFPriOverrideTable
(
    IN  GT_QD_DEV     *dev,
    IN  GT_PRI_OVERRIDE_FTYPE    fType,
    OUT GT_FPRI_TBL_ENTRY    *entry
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16            data;

    DBG_INFO(("gsysGetFPriOverrideTable Called.\n"));

    /* Check if Switch supports this feature. */
    if (!IS_IN_DEV_GROUP(dev,DEV_FRAME_PRIORITY_OVERRIDE_TABLE))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    switch (fType)
    {
        case FTYPE_DSA_TO_CPU_BPDU:
        case FTYPE_DSA_TO_CPU_F2R:
        case FTYPE_DSA_TO_CPU_IGMP:
        case FTYPE_DSA_TO_CPU_TRAP:
        case FTYPE_DSA_TO_CPU_ARP:
        case FTYPE_DSA_TO_CPU_MIRROR:
        case FTYPE_DSA_TO_CPU_RESERVED:
        case FTYPE_DSA_TO_CPU_UCAST_MGMT:
        case FTYPE_DSA_FROM_CPU:
        case FTYPE_DSA_CROSS_CHIP_FC:
        case FTYPE_DSA_CROSS_CHIP_EGRESS_MON:
        case FTYPE_DSA_CROSS_CHIP_INGRESS_MON:
        case FTYPE_PORT_ETYPE_MATCH:
        case FTYPE_BCAST_NON_DSA_CONTROL:
        case FTYPE_PPPoE_NON_DSA_CONTROL:
        case FTYPE_IP_NON_DSA_CONTROL:
            break;
        default:
            DBG_INFO(("GT_BAD_PARAM\n"));
            return GT_BAD_PARAM;
    }

    gtSemTake(dev,dev->tblRegsSem,OS_WAIT_FOREVER);

    /* Wait until the Priority Override Table is ready. */
#ifdef GT_RMGMT_ACCESS
    {
      HW_DEV_REG_ACCESS regAccess;

      regAccess.entries = 1;

      regAccess.rw_reg_list[0].cmd = HW_REG_WAIT_TILL_0;
      regAccess.rw_reg_list[0].addr = CALC_SMI_DEV_ADDR(dev, 0, GLOBAL2_REG_ACCESS);
      regAccess.rw_reg_list[0].reg = QD_REG_PRIORITY_OVERRIDE;
      regAccess.rw_reg_list[0].data = 15;
      retVal = hwAccessMultiRegs(dev, &regAccess);
      if(retVal != GT_OK)
      {
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
      }
    }
#else
    data = 1;
    while(data == 1)
    {
        retVal = hwGetGlobal2RegField(dev,QD_REG_PRIORITY_OVERRIDE,15,1,&data);
        if(retVal != GT_OK)
        {
            gtSemGive(dev,dev->tblRegsSem);
            return retVal;
        }
    }
#endif

    data = (fType << 8) | 0x1000;

    retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    retVal = hwReadGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, &data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    if (data & (1 << 3))
    {
        entry->fPriEn = GT_TRUE;
        entry->fPriority = data & 0x7;
    }
    else
    {
        entry->fPriEn = GT_FALSE;
        entry->fPriority = data & 0x7; /* no meaning, but just in case */
    }

    gtSemGive(dev,dev->tblRegsSem);

    return GT_OK;
}


/*******************************************************************************
* gsysSetQPriAvbOverrideTable
*
* DESCRIPTION:
*         Queue Priority Override for AVB enabled ports or AvbOverride enabled ports.
*        When a frame enters a AVB port, its type is determined and the type is used
*        to access the Queue Priority Table. If the type's qPriEn (in GT_QPRI_TBL_ENTRY
*        structure) is enabled, then the frame's Queue Priority will be overridden
*        with the value written in qPriority (in GT_QPRI_TBL_ENTRY structure).
*        Frame Types supported are:
*            FTYPE_DSA_TO_CPU_BPDU -
*                Used on multicast DSA To_CPU frames with a Code of 0x0 (BPDU/MGMT).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_F2R -
*                Used on DSA To_CPU frames with a Code of 0x1 (Frame to Register
*                Reply). Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_IGMP -
*                Used on DSA To_CPU frames with a Code of 0x2 (IGMP/MLD Trap)
*                and on non-DSA Control frames that are IGMP or MLD trapped
*            FTYPE_DSA_TO_CPU_TRAP -
*                Used on DSA To_CPU frames with a Code of 0x3 (Policy Trap) and
*                on non-DSA Control frames that are Policy Trapped
*            FTYPE_DSA_TO_CPU_ARP -
*                Used on DSA To_CPU frames with a Code of 0x4 (ARP Mirror) and
*                on non-DSA Control frames that are ARP Mirrored (see gprtSetARPtoCPU API).
*            FTYPE_DSA_TO_CPU_MIRROR -
*                Used on DSA To_CPU frames with a Code of 0x5 (Policy Mirror) and
*                on non-DSA Control frames that are Policy Mirrored (see gprtSetPolicy API).
*            FTYPE_DSA_TO_CPU_RESERVED -
*                Used on DSA To_CPU frames with a Code of 0x6 (Reserved). Not
*                used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_UCAST_MGMT -
*                Used on unicast DSA To_CPU frames with a Code of 0x0 (unicast
*                MGMT). Not used on non-DSA Control frames.
*            FTYPE_DSA_FROM_CPU -
*                Used on DSA From_CPU frames. Not used on non-DSA Control frame
*            FTYPE_DSA_CROSS_CHIP_FC -
*                Used on DSA Cross Chip Flow Control frames (To_Sniffer Flow
*                Control). Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_EGRESS_MON -
*                Used on DSA Cross Chip Egress Monitor frames (To_Sniffer Tx).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_INGRESS_MON -
*                Used on DSA Cross Chip Ingress Monitor frames (To_Sniffer Rx).
*                Not used on non-DSA Control frames.
*            FTYPE_PORT_ETYPE_MATCH -
*                Used on normal network ports (see gprtSetFrameMode API)
*                on frames whose Ethertype matches the port's PortEType register.
*                Not used on non-DSA Control frames.
*            FTYPE_BCAST_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain a Broadcast
*                destination address. Not used on DSA Control frames.
*            FTYPE_PPPoE_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an Ether Type 0x8863
*                (i.e., PPPoE frames). Not used on DSA Control frames.
*            FTYPE_IP_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an IPv4 or IPv6 Ether
*                Type. Not used on DSA Control frames.
*
* INPUTS:
*       fType - frame type (GT_PRI_OVERRIDE_FTYPE)
*       entry - Q Priority Override Table entry (GT_QPRI_TBL_ENTRY)
*
* OUTPUTS:
*       None.
*
* RETURNS:
*        GT_OK      - on success
*        GT_FAIL    - on error
*        GT_BAD_PARAM     - on unknown frame type
*        GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*       None
*
*******************************************************************************/
GT_STATUS gsysSetQPriAvbOverrideTable
(
    IN  GT_QD_DEV     *dev,
    IN  GT_PRI_OVERRIDE_FTYPE    fType,
    IN  GT_QPRI_TBL_ENTRY    *entry
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16            data,qPri;

    DBG_INFO(("gsysSetQPriAvbOverrideTable Called.\n"));

    /* Check if Switch supports this feature. */
    if (!IS_IN_DEV_GROUP(dev,DEV_QAVB_PRIORITY_OVERRIDE_TABLE))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    switch (fType)
    {
        case FTYPE_DSA_TO_CPU_BPDU:
        case FTYPE_DSA_TO_CPU_F2R:
        case FTYPE_DSA_TO_CPU_IGMP:
        case FTYPE_DSA_TO_CPU_TRAP:
        case FTYPE_DSA_TO_CPU_ARP:
        case FTYPE_DSA_TO_CPU_MIRROR:
        case FTYPE_DSA_TO_CPU_RESERVED:
        case FTYPE_DSA_TO_CPU_UCAST_MGMT:
        case FTYPE_DSA_FROM_CPU:
        case FTYPE_DSA_CROSS_CHIP_FC:
        case FTYPE_DSA_CROSS_CHIP_EGRESS_MON:
        case FTYPE_DSA_CROSS_CHIP_INGRESS_MON:
        case FTYPE_PORT_ETYPE_MATCH:
        case FTYPE_BCAST_NON_DSA_CONTROL:
        case FTYPE_PPPoE_NON_DSA_CONTROL:
        case FTYPE_IP_NON_DSA_CONTROL:
            break;
        default:
            DBG_INFO(("GT_BAD_PARAM\n"));
            return GT_BAD_PARAM;
    }

    gtSemTake(dev,dev->tblRegsSem,OS_WAIT_FOREVER);

    data = fType << 8;

    retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    retVal = hwReadGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, &data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    data &= ((1 << 3) | (3 << 0));    /* keep QPri information */

    if (entry->qPriEn)
        qPri = (GT_U16)((1 << 7) | ((entry->qPriority & 0x3) << 4));
    else
        qPri = 0;

    data |= (GT_U16)((1 << 15) | (fType << 8) | qPri);

    retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);

    gtSemGive(dev,dev->tblRegsSem);

    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }

    return GT_OK;
}


/*******************************************************************************
* gsysGetQPriOverrideTable
*
* DESCRIPTION:
*         Queue Priority Override for AVB enabled ports or AvbOverride enabled ports.
*        When a frame enters a AVB port, its type is determined and the type is used
*        to access the Queue Priority Table. If the type's qPriEn (in GT_QPRI_TBL_ENTRY
*        structure) is enabled, then the frame's Queue Priority will be overridden
*        with the value written in qPriority (in GT_QPRI_TBL_ENTRY structure).
*        Frame Types supported are:
*            FTYPE_DSA_TO_CPU_BPDU -
*                Used on multicast DSA To_CPU frames with a Code of 0x0 (BPDU/MGMT).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_F2R -
*                Used on DSA To_CPU frames with a Code of 0x1 (Frame to Register
*                Reply). Not used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_IGMP -
*                Used on DSA To_CPU frames with a Code of 0x2 (IGMP/MLD Trap)
*                and on non-DSA Control frames that are IGMP or MLD trapped
*            FTYPE_DSA_TO_CPU_TRAP -
*                Used on DSA To_CPU frames with a Code of 0x3 (Policy Trap) and
*                on non-DSA Control frames that are Policy Trapped
*            FTYPE_DSA_TO_CPU_ARP -
*                Used on DSA To_CPU frames with a Code of 0x4 (ARP Mirror) and
*                on non-DSA Control frames that are ARP Mirrored (see gprtSetARPtoCPU API).
*            FTYPE_DSA_TO_CPU_MIRROR -
*                Used on DSA To_CPU frames with a Code of 0x5 (Policy Mirror) and
*                on non-DSA Control frames that are Policy Mirrored (see gprtSetPolicy API).
*            FTYPE_DSA_TO_CPU_RESERVED -
*                Used on DSA To_CPU frames with a Code of 0x6 (Reserved). Not
*                used on non-DSA Control frames.
*            FTYPE_DSA_TO_CPU_UCAST_MGMT -
*                Used on unicast DSA To_CPU frames with a Code of 0x0 (unicast
*                MGMT). Not used on non-DSA Control frames.
*            FTYPE_DSA_FROM_CPU -
*                Used on DSA From_CPU frames. Not used on non-DSA Control frame
*            FTYPE_DSA_CROSS_CHIP_FC -
*                Used on DSA Cross Chip Flow Control frames (To_Sniffer Flow
*                Control). Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_EGRESS_MON -
*                Used on DSA Cross Chip Egress Monitor frames (To_Sniffer Tx).
*                Not used on non-DSA Control frames.
*            FTYPE_DSA_CROSS_CHIP_INGRESS_MON -
*                Used on DSA Cross Chip Ingress Monitor frames (To_Sniffer Rx).
*                Not used on non-DSA Control frames.
*            FTYPE_PORT_ETYPE_MATCH -
*                Used on normal network ports (see gprtSetFrameMode API)
*                on frames whose Ethertype matches the port's PortEType register.
*                Not used on non-DSA Control frames.
*            FTYPE_BCAST_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain a Broadcast
*                destination address. Not used on DSA Control frames.
*            FTYPE_PPPoE_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an Ether Type 0x8863
*                (i.e., PPPoE frames). Not used on DSA Control frames.
*            FTYPE_IP_NON_DSA_CONTROL -
*                Used on Non-DSA Control frames that contain an IPv4 or IPv6 Ether
*                Type. Not used on DSA Control frames.
*
* INPUTS:
*       fType - frame type (GT_PRI_OVERRIDE_FTYPE)
*
* OUTPUTS:
*       entry - Q Priority Override Table entry (GT_QPRI_TBL_ENTRY)
*
* RETURNS:
*        GT_OK      - on success
*        GT_FAIL    - on error
*        GT_BAD_PARAM     - on unknown frame type
*        GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*       None
*
*******************************************************************************/
GT_STATUS gsysGetQPriAvbOverrideTable
(
    IN  GT_QD_DEV     *dev,
    IN  GT_PRI_OVERRIDE_FTYPE    fType,
    OUT GT_QPRI_TBL_ENTRY    *entry
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16            data;

    DBG_INFO(("gsysGetQPriAvbOverrideTable Called.\n"));

    /* Check if Switch supports this feature. */
    if (!IS_IN_DEV_GROUP(dev,DEV_QAVB_PRIORITY_OVERRIDE_TABLE))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    switch (fType)
    {
        case FTYPE_DSA_TO_CPU_BPDU:
        case FTYPE_DSA_TO_CPU_F2R:
        case FTYPE_DSA_TO_CPU_IGMP:
        case FTYPE_DSA_TO_CPU_TRAP:
        case FTYPE_DSA_TO_CPU_ARP:
        case FTYPE_DSA_TO_CPU_MIRROR:
        case FTYPE_DSA_TO_CPU_RESERVED:
        case FTYPE_DSA_TO_CPU_UCAST_MGMT:
        case FTYPE_DSA_FROM_CPU:
        case FTYPE_DSA_CROSS_CHIP_FC:
        case FTYPE_DSA_CROSS_CHIP_EGRESS_MON:
        case FTYPE_DSA_CROSS_CHIP_INGRESS_MON:
        case FTYPE_PORT_ETYPE_MATCH:
        case FTYPE_BCAST_NON_DSA_CONTROL:
        case FTYPE_PPPoE_NON_DSA_CONTROL:
        case FTYPE_IP_NON_DSA_CONTROL:
            break;
        default:
            DBG_INFO(("GT_BAD_PARAM\n"));
            return GT_BAD_PARAM;
    }

    gtSemTake(dev,dev->tblRegsSem,OS_WAIT_FOREVER);

    /* Wait until the Priority Override Table is ready. */
#ifdef GT_RMGMT_ACCESS
    {
      HW_DEV_REG_ACCESS regAccess;

      regAccess.entries = 1;

      regAccess.rw_reg_list[0].cmd = HW_REG_WAIT_TILL_0;
      regAccess.rw_reg_list[0].addr = CALC_SMI_DEV_ADDR(dev, 0, GLOBAL2_REG_ACCESS);
      regAccess.rw_reg_list[0].reg = QD_REG_PRIORITY_OVERRIDE;
      regAccess.rw_reg_list[0].data = 15;
      retVal = hwAccessMultiRegs(dev, &regAccess);
      if(retVal != GT_OK)
      {
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
      }
    }
#else
    data = 1;
    while(data == 1)
    {
        retVal = hwGetGlobal2RegField(dev,QD_REG_PRIORITY_OVERRIDE,15,1,&data);
        if(retVal != GT_OK)
        {
            gtSemGive(dev,dev->tblRegsSem);
            return retVal;
        }
    }
#endif

    data = fType << 8;

    retVal = hwWriteGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    retVal = hwReadGlobal2Reg(dev, QD_REG_PRIORITY_OVERRIDE, &data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->tblRegsSem);
        return retVal;
    }

    if (data & (1 << 7))
    {
        entry->qPriEn = GT_TRUE;
        entry->qPriority = (data >> 4) & 0x3;
    }
    else
    {
        entry->qPriEn = GT_FALSE;
        entry->qPriority = (data >> 4) & 0x3; /* no meaning, but just in case */
    }

    gtSemGive(dev,dev->tblRegsSem);

    return GT_OK;
}