blob: 13fbb694790f7a775d1a7acaaf270d05c6df4d66 [file] [log] [blame]
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// doedit page (hymod_bddb / boards)
require("defs.php");
pg_head("$bddb_label - Edit Board Results");
if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
die("the board serial number was not specified");
$serno=intval($_REQUEST['serno']);
$query="update boards set";
if (isset($_REQUEST['ethaddr'])) {
$ethaddr=$_REQUEST['ethaddr'];
if (!eth_addr_is_valid($ethaddr))
die("ethaddr is invalid ('$ethaddr')");
$query.=" ethaddr='$ethaddr',";
}
if (isset($_REQUEST['date'])) {
$date=$_REQUEST['date'];
list($y, $m, $d) = split("-", $date);
if (!checkdate($m, $d, $y) || $y < 1999)
die("date is invalid (input '$date', " .
"yyyy-mm-dd '$y-$m-$d')");
$query.=" date='$date'";
}
if (isset($_REQUEST['batch'])) {
$batch=$_REQUEST['batch'];
if (strlen($batch) > 32)
die("batch field too long (>32)");
$query.=", batch='$batch'";
}
if (isset($_REQUEST['type'])) {
$type=$_REQUEST['type'];
if (!in_array($type, $type_vals))
die("Invalid type ($type) specified");
$query.=", type='$type'";
}
if (isset($_REQUEST['rev'])) {
$rev=$_REQUEST['rev'];
if (($rev = intval($rev)) <= 0 || $rev > 255)
die("Revision number is invalid ($rev)");
$query.=sprintf(", rev=%d", $rev);
}
if (isset($_REQUEST['location'])) {
$location=$_REQUEST['location'];
if (strlen($location) > 64)
die("location field too long (>64)");
$query.=", location='$location'";
}
if (isset($_REQUEST['comments']))
$comments=$_REQUEST['comments'];
$query.=", comments='" . rawurlencode($comments) . "'";
$query.=gather_enum_multi_query("sdram", 4);
$query.=gather_enum_multi_query("flash", 4);
$query.=gather_enum_multi_query("zbt", 16);
$query.=gather_enum_multi_query("xlxtyp", 4);
$nxlx = count_enum_multi("xlxtyp", 4);
$query.=gather_enum_multi_query("xlxspd", 4);
if (count_enum_multi("xlxspd", 4) != $nxlx)
die("number of xilinx speeds not same as number of types");
$query.=gather_enum_multi_query("xlxtmp", 4);
if (count_enum_multi("xlxtmp", 4) != $nxlx)
die("number of xilinx temps. not same as number of types");
$query.=gather_enum_multi_query("xlxgrd", 4);
if (count_enum_multi("xlxgrd", 4) != $nxlx)
die("number of xilinx grades not same as number of types");
if (isset($_REQUEST['cputyp'])) {
$cputyp=$_REQUEST['cputyp'];
$query.=", cputyp='$cputyp'";
if (!isset($_REQUEST['cpuspd']) || $_REQUEST['cpuspd'] == '')
die("must specify cpu speed if cpu type is defined");
$cpuspd=$_REQUEST['cpuspd'];
$query.=", cpuspd='$cpuspd'";
if (!isset($_REQUEST['cpmspd']) || $_REQUEST['cpmspd'] == '')
die("must specify cpm speed if cpu type is defined");
$cpmspd=$_REQUEST['cpmspd'];
$query.=", cpmspd='$cpmspd'";
if (!isset($_REQUEST['busspd']) || $_REQUEST['busspd'] == '')
die("must specify bus speed if cpu type is defined");
$busspd=$_REQUEST['busspd'];
$query.=", busspd='$busspd'";
}
else {
if (isset($_REQUEST['cpuspd']))
die("can't specify cpu speed if there is no cpu");
if (isset($_REQUEST['cpmspd']))
die("can't specify cpm speed if there is no cpu");
if (isset($_REQUEST['busspd']))
die("can't specify bus speed if there is no cpu");
}
if (isset($_REQUEST['hschin'])) {
$hschin=$_REQUEST['hschin'];
if (($hschin = intval($hschin)) < 0 || $hschin > 4)
die("Invalid number of hs input chans ($hschin)");
}
else
$hschin = 0;
if (isset($_REQUEST['hschout'])) {
$hschout=$_REQUEST['hschout'];
if (($hschout = intval($hschout)) < 0 || $hschout > 4)
die("Invalid number of hs output chans ($hschout)");
}
else
$hschout = 0;
if (isset($_REQUEST['hstype'])) {
$hstype=$_REQUEST['hstype'];
$query.=", hstype='$hstype'";
}
else {
if ($_REQUEST['hschin'] != 0)
die("number of high-speed input channels must be zero"
. " if high-speed chip is not present");
if ($_REQUEST['hschout'] != 0)
die("number of high-speed output channels must be zero"
. " if high-speed chip is not present");
}
$query.=", hschin='$hschin'";
$query.=", hschout='$hschout'";
$query.=" where serno=$serno";
mysql_query($query);
if(mysql_errno()) {
$errstr = mysql_error();
echo "\t<font size=+4>\n";
echo "\t\t<p>\n";
echo "\t\t\tThe following error was encountered:\n";
echo "\t\t</p>\n";
echo "\t\t<center>\n";
printf("\t\t\t<b>%s</b>\n", $errstr);
echo "\t\t</center>\n";
echo "\t</font>\n";
}
else {
$sernos = array($serno);
$nsernos = 1;
write_eeprom_cfg_file();
echo "\t<font size=+2>\n";
echo "\t\t<p>\n";
echo "\t\t\tThe board with serial number <b>$serno</b> was"
. " successfully updated";
if ($numerrs > 0) {
$errstr = $cfgerrs[0];
echo "<br>\n\t\t\t";
echo "(but the cfg file update failed: $errstr)";
}
echo "\n";
echo "\t\t</p>\n";
echo "\t</font>\n";
}
?>
<p>
<table align=center width="100%">
<tr>
<td align=center><a href="browse.php">Back to Browse</a></td>
<td align=center><a href="index.php">Back to Start</a></td>
</tr>
</table>
<?php
pg_foot();
?>