#include <Copyright.h>
/********************************************************************************
* hgVlan.c
*
* DESCRIPTION:
*       Setup the VLAN table of QuaterDeck so that it can be used as a Home
*        Gateway.
*
*
* DEPENDENCIES:   None.
*
* FILE REVISION NUMBER:
*
*******************************************************************************/
#include "msSample.h"

static GT_STATUS sampleHomeGatewayVlan(GT_QD_DEV *dev,
                               GT_LPORT numOfPorts,
                       GT_LPORT cpuPort);

/*
 *  Get the required parameter from QuarterDeck driver.
 *    Notes: This routine should be called after QuarterDeck Driver has been initialized.
 *        (Refer to Initialization Sample)
*/

GT_STATUS sampleVlanSetup(GT_QD_DEV *dev)
{
    sampleHomeGatewayVlan(dev,dev->numOfPorts, dev->cpuPortNum);

    return GT_OK;
}


/*
 *    WAN Port (Port 0) and CPU Port (Port 5) are in VLAN 1 and
 *    all ports (including CPU Port) except WAN Port are in VLAN 2.
 *    1) Set PVID for each port. (CPU port has PVID 2, which is the same as LAN)
 *    2) Set Port Based VLAN Map for each port. (CPU port's VLAN Map is set for all LAN ports)
 *  Notes:
 *        1) Trailer Mode
 *            When Ethernet Device, which is directly connected to CPU port, sends out a packet
 *            to WAN, DPV in Trailer Tag should have WAN port bit set (bit 0 in this case), and
 *            to LAN, Trailer Tag should be set to 0.
 *            Restriction : Only one group of VLAN can have multiple ports.
 *        2) Header Mode
 *            When Ethernet Device, which is directly connected to CPU port, sends out a packet
 *            to WAN, VlanTable in Header Tag should have WAN ports bits set (bit 0 in this case), and
 *            to LAN, VlanTable in Header Tag should have LAN ports bits set (bit 1~4 and 6 in this case)
*/
static GT_STATUS sampleHomeGatewayVlan(GT_QD_DEV *dev,GT_LPORT numOfPorts, GT_LPORT cpuPort)
{
    GT_STATUS status;
    GT_LPORT index,port,portToSet;
    GT_LPORT portList[MAX_SWITCH_PORTS];

    /*
     *  set PVID for each port.
     *    the first port(port 0, WAN) has default VID 2 and all others has 1.
     */

    if((status = gvlnSetPortVid(dev,0,2)) != GT_OK)
    {
        MSG_PRINT(("gprtSetPortVid returned fail.\n"));
        return status;
    }

    for (port=1; port<numOfPorts; port++)
    {
        if((status = gvlnSetPortVid(dev,port,1)) != GT_OK)
        {
            MSG_PRINT(("gprtSetPortVid returned fail.\n"));
            return status;
        }
    }

    /*
     *  set Port VLAN Mapping.
     *    port 0 (WAN) and cpu port are in a vlan 2.
     *    And all the rest ports (LAN) and cpu port are in a vlan 1.
     */

    /* port 0 : set cpuPort only */
    portList[0] = cpuPort;
    if((status = gvlnSetPortVlanPorts(dev,0,portList,1)) != GT_OK)
    {
        MSG_PRINT(("gvlnSetPortVlanPorts returned fail.\n"));
        return status;
    }

    /* set all ports except port 0 and itself */
    for (portToSet=1; portToSet<numOfPorts; portToSet++)
    {
        /* port 0 and cpuPort will be taken cared seperately. */
        if (portToSet == cpuPort)
        {
            continue;
        }

        index = 0;
        for (port=1; port<numOfPorts; port++)
        {
            if (port == portToSet)
            {
                continue;
            }
            portList[index++] = port;
        }

        if((status = gvlnSetPortVlanPorts(dev,(GT_U8)portToSet,portList,index)) != GT_OK)
        {
            MSG_PRINT(("gvlnSetPortVlanPorts returned fail.\n"));
            return status;
        }
    }

    /* cpuPort : set all port except cpuPort and WAN port */
    index = 0;
    for (port=1; port<numOfPorts; port++)
    {
        if (port == cpuPort)
        {
            continue;
        }
        portList[index++] = port;
    }

    if((status = gvlnSetPortVlanPorts(dev,cpuPort,portList,index)) != GT_OK)
    {
        MSG_PRINT(("gvlnSetPortVlanPorts returned fail.\n"));
        return status;
    }

    return GT_OK;
}