blob: df46be5469ddb5413cda92af174537f19d157053 [file] [log] [blame]
/*
* Copyright (C) 2012
* David Purdy <david.c.purdy@gmail.com>
*
* Based on Kirkwood support:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _CONFIG_POGO_E02_H
#define _CONFIG_POGO_E02_H
/*
* Machine type definition and ID
*/
#define MACH_TYPE_POGO_E02 3542
#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
#define CONFIG_IDENT_STRING "\nPogo E02"
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KIRKWOOD /* SOC Family Name */
#define CONFIG_KW88F6281 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Commands configuration
*/
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#define CONFIG_SYS_MVFS
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
/* Remove or override few declarations from mv-common.h */
#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
#define CONFIG_SYS_PROMPT "PogoE02> "
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
/*
* Default environment variables
*/
#define CONFIG_BOOTCOMMAND \
"setenv bootargs $(bootargs_console); " \
"run bootcmd_usb; " \
"bootm 0x00800000 0x01100000"
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
"32M(rootfs),-(data)\0"\
"mtdids=nand0=orion_nand\0"\
"bootargs_console=console=ttyS0,115200\0" \
"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
"ext2load usb 0:1 0x01100000 /uInitrd\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
/*
* File system
*/
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO
#endif /* _CONFIG_POGO_E02_H */