#include <Copyright.h>
/********************************************************************************
* gtDrvConfig.h
*
* DESCRIPTION:
*       Includes driver level configuration and initialization function.
*
* DEPENDENCIES:
*       None.
*
* FILE REVISION NUMBER:
*       $Revision: 8 $
*
*******************************************************************************/

#include <gtDrvSwRegs.h>
#include <gtDrvConfig.h>
#include <gtMiiSmiIf.h>
#include <gtHwCntl.h>
#include <gtVct.h>
#include <msApiDefs.h>


/*******************************************************************************
* lport2port
*
* DESCRIPTION:
*       This function converts logical port number to physical port number
*
* INPUTS:
*        portVec - physical port list in vector
*        port    - logical port number
* OUTPUTS:
*        None.
* RETURNS:
*       physical port number
*
* COMMENTS:
*
*******************************************************************************/
GT_U8 lport2port
(
    IN GT_U16    portVec,
    IN GT_LPORT     port
)
{
    GT_U8    hwPort, tmpPort;

    tmpPort = hwPort = 0;

    while (portVec)
    {
        if(portVec & 0x1)
        {
            if((GT_LPORT)tmpPort == port)
                break;
            tmpPort++;
        }
        hwPort++;
        portVec >>= 1;
    }

    if (!portVec)
        hwPort = GT_INVALID_PORT;

    return hwPort;
}

/*******************************************************************************
* port2lport
*
* DESCRIPTION:
*       This function converts physical port number to logical port number
*
* INPUTS:
*        portVec - physical port list in vector
*        port    - logical port number
* OUTPUTS:
*        None.
* RETURNS:
*       physical port number
*
* COMMENTS:
*
*******************************************************************************/
GT_LPORT port2lport
(
    IN GT_U16    portVec,
    IN GT_U8     hwPort
)
{
    GT_U8        tmpPort,port;

    port = 0;

    if (hwPort == GT_INVALID_PORT)
        return (GT_LPORT)hwPort;

    if (!GT_IS_PORT_SET(portVec, hwPort))
        return (GT_LPORT)GT_INVALID_PORT;

    for (tmpPort = 0; tmpPort <= hwPort; tmpPort++)
    {
        if(portVec & 0x1)
        {
            port++;
        }
        portVec >>= 1;
    }

    return (GT_LPORT)port-1;
}

/*******************************************************************************
* lportvec2portvec
*
* DESCRIPTION:
*       This function converts logical port vector to physical port vector
*
* INPUTS:
*        portVec - physical port list in vector
*        lVec     - logical port vector
* OUTPUTS:
*        None.
* RETURNS:
*       physical port vector
*
* COMMENTS:
*
*******************************************************************************/
GT_U32 lportvec2portvec
(
    IN GT_U16    portVec,
    IN GT_U32     lVec
)
{
    GT_U32    pVec, vec;

    pVec = 0;
    vec = 1;

    while (portVec)
    {
        if(portVec & 0x1)
        {
            if(lVec & 0x1)
            {
                pVec |= vec;
            }
            lVec >>= 1;
        }

        vec <<= 1;
        portVec >>= 1;
    }

    if(lVec)
        return GT_INVALID_PORT_VEC;

    return pVec;
}

/*******************************************************************************
* portvec2lportvec
*
* DESCRIPTION:
*       This function converts physical port vector to logical port vector
*
* INPUTS:
*        portVec - physical port list in vector
*        pVec     - physical port vector
* OUTPUTS:
*        None.
* RETURNS:
*       logical port vector
*
* COMMENTS:
*
*******************************************************************************/
GT_U32 portvec2lportvec
(
    IN GT_U16    portVec,
    IN GT_U32     pVec
)
{
    GT_U32    lVec, vec;

    lVec = 0;
    vec = 1;

    while (portVec)
    {
        if(portVec & 0x1)
        {
            if(pVec & 0x1)
            {
                lVec |= vec;
            }
            vec <<= 1;
        }

        pVec >>= 1;
        portVec >>= 1;
    }

    return lVec;
}

/*******************************************************************************
* lport2phy
*
* DESCRIPTION:
*       This function converts logical port number to physical phy number.
*
* INPUTS:
*        portVec - physical port list in vector
*        port    - logical port number
* OUTPUTS:
*        None.
* RETURNS:
*       physical port number
*
* COMMENTS:
*
*******************************************************************************/
GT_U8 lport2phy
(
    IN GT_QD_DEV    *dev,
    IN GT_LPORT     port
)
{
    GT_U8    hwPort;

    /* check if it's for SERDES */
    if(dev->validSerdesVec & (1<<port))
    {
        hwPort = (GT_U8)port;
    }
    else
    {
        hwPort = GT_LPORT_2_PORT(port);
    }

    return hwPort;
}


/*******************************************************************************
* driverConfig
*
* DESCRIPTION:
*       This function initializes the driver level of the quarterDeck software.
*
* INPUTS:
*        None.
* OUTPUTS:
*        None.
* RETURNS:
*       GT_OK               - on success, or
*       GT_OUT_OF_CPU_MEM   - if failed to allocate CPU memory,
*       GT_FAIL             - otherwise.
*
* COMMENTS:
*       1.  This function should perform the following:
*           -   Initialize the global switch configuration structure.
*           -   Initialize Mii Interface
*
*******************************************************************************/
GT_STATUS driverConfig
(
    IN GT_QD_DEV    *dev
)
{
    GT_U16          deviceId;
    GT_BOOL         highSmiDevAddr;


    if(dev->accessMode == SMI_AUTO_SCAN_MODE)
    {
        /* Initialize the MII / SMI interface, search for the device */
        if((deviceId = miiSmiIfInit(dev,&highSmiDevAddr)) == 0)
        {
            return GT_FAIL;
        }

        dev->baseRegAddr = (highSmiDevAddr)?0x10:0;
    }
    else
    {
        if((deviceId = miiSmiManualIfInit(dev,(GT_U32)dev->baseRegAddr)) == 0)
        {
            return GT_FAIL;
        }
    }

    /* Init the device's config struct.             */
    dev->deviceId       = deviceId >> 4;
    dev->revision       = (GT_U8)deviceId & 0xF;

    return GT_OK;
}


/*******************************************************************************
* driverEnable
*
* DESCRIPTION:
*       This function enables the switch for full operation, after the driver
*       Config function was called.
*
* INPUTS:
*       None.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK on success,
*       GT_FAIL othrwise.
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS driverEnable
(
    IN GT_QD_DEV    *dev
)
{
    GT_UNUSED_PARAM(dev);
    return GT_OK;
}


GT_STATUS driverGetSerdesPort(GT_QD_DEV *dev, GT_U8* hwPort)
{
    switch(dev->deviceId)
    {
        case GT_88E6122:
            if ((*hwPort<3) || (*hwPort>6))
            {
                *hwPort = GT_INVALID_PORT;
            }
            else
            {
                *hwPort += 9;
            }
            break;
        case GT_88E6131:
        case GT_88E6108:
            if ((*hwPort<4) || (*hwPort>7))
            {
                *hwPort = GT_INVALID_PORT;
            }
            else
            {
                *hwPort += 8;
            }
            break;
        case GT_88E6123:
        case GT_88E6140:
        case GT_88E6161:
        case GT_88E6165:
        case GT_88E6172:
        case GT_88E6176:
        case GT_88E6240:
        case GT_88E6352:

            if ((*hwPort<4) || (*hwPort>5))
            {
                *hwPort = GT_INVALID_PORT;
            }
            else
            {
              *hwPort += 8;
              if(!(IS_IN_DEV_GROUP(dev,DEV_88E6165_FAMILY)))
                *hwPort = 0xF;
            }
            break;
        default:
            *hwPort = GT_INVALID_PORT;
            break;
    }
    return GT_OK;
}

/*******************************************************************************
* driverFindPhyID
*
* DESCRIPTION:
*       This function get Phy ID from Phy register 2 and 3.
*
* INPUTS:
*       hwPort    - port number where the Phy is connected
*
* OUTPUTS:
*       phyId    - Phy ID
*
* RETURNS:
*       GT_OK     - if found Marvell Phy,
*       GT_FAIL - othrwise.
*
* COMMENTS:
*       None.
*
*******************************************************************************/
static GT_STATUS driverFindPhyID
(
    IN  GT_QD_DEV    *dev,
    IN    GT_U8         hwPort,
    OUT    GT_U32         *phyID
)
{
    GT_U16 ouiMsb, ouiLsb;
    GT_STATUS status;

    if((status= hwReadPhyReg(dev,hwPort,2,&ouiMsb)) != GT_OK)
    {
        DBG_INFO(("Not able to read Phy Register.\n"));
        return status;
    }

    if((status= hwReadPhyReg(dev,hwPort,3,&ouiLsb)) != GT_OK)
    {
        DBG_INFO(("Not able to read Phy Register.\n"));
        return status;
    }

    if(ouiMsb != MARVELL_OUI_MSb)
        return GT_FAIL;

    *phyID = (GT_U32)ouiLsb;

    return GT_OK;
}


/*******************************************************************************
* driverIsPhyAttached
*
* DESCRIPTION:
*       This function verifies Marvell Phy.
*
* INPUTS:
*       hwPort    - port number where the Phy is connected
*
* OUTPUTS:
*        None.
*
* RETURNS:
*       1 - if Marvell Phy exists
*        0 - otherwise
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_U32 driverIsPhyAttached
(
    IN  GT_QD_DEV    *dev,
    IN    GT_U8         hwPort
)
{
    GT_U32         phyId;

    if(hwPort > dev->maxPhyNum)
        return 0;

    if(driverFindPhyID(dev,hwPort,&phyId) != GT_OK)
    {
        DBG_INFO(("cannot find Marvell Phy.\n"));
        return 0;
    }

    return 1;
}

/*******************************************************************************
* driverGetPhyID
*
* DESCRIPTION:
*       This function reads and returns Phy ID (register 3) of Marvell Phy.
*
* INPUTS:
*       hwPort    - port number where the Phy is connected
*
* OUTPUTS:
*        None.
*
* RETURNS:
*       phyId - if Marvell Phy exists
*        GT_INVALID_PORT      - otherwise
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_U32 driverGetPhyID
(
    IN  GT_QD_DEV    *dev,
    IN    GT_U8         hwPort
)
{
    GT_U32         phyId;

    if(hwPort > dev->maxPhyNum)
        return GT_INVALID_PHY;

    if(driverFindPhyID(dev,hwPort,&phyId) != GT_OK)
    {
        DBG_INFO(("cannot find Marvell Phy.\n"));
        return GT_INVALID_PHY;
    }

    return phyId;
}


/*******************************************************************************
* driverPagedAccessStart
*
* DESCRIPTION:
*       This function stores page register and Auto Reg Selection mode if needed.
*
* INPUTS:
*       hwPort     - port number where the Phy is connected
*        pageType - type of the page registers
*
* OUTPUTS:
*       autoOn    - GT_TRUE if Auto Reg Selection enabled, GT_FALSE otherwise.
*        pageReg - Page Register Data
*
* RETURNS:
*       GT_OK     - if success
*       GT_FAIL - othrwise.
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS driverPagedAccessStart
(
    IN  GT_QD_DEV    *dev,
    IN    GT_U8         hwPort,
    IN    GT_U8         pageType,
    OUT    GT_BOOL         *autoOn,
    OUT    GT_U16         *pageReg
)
{
    GT_U16 data;
    GT_STATUS status;

    switch(pageType)
    {
        case GT_PHY_PAGE_WRITE_BACK:
            break;
        case GT_PHY_PAGE_DIS_AUTO1:    /* 88E1111 Type */
            if((status= hwGetPhyRegField(dev,hwPort,27,9,1,&data)) != GT_OK)
            {
                DBG_INFO(("Not able to read Phy Register.\n"));
                return status;
            }

            data ^= 0x1;    /* toggle bit 0 */
            BIT_2_BOOL(data, *autoOn);

            if (*autoOn) /* Auto On */
            {
                if((status= hwSetPhyRegField(dev,hwPort,27,9,1,data)) != GT_OK)
                {
                    DBG_INFO(("Not able to write Phy Register.\n"));
                    return status;
                }
            }

            break;
        case GT_PHY_PAGE_DIS_AUTO2:    /* 88E1112 Type */
            if((status= hwGetPhyRegField(dev,hwPort,22,15,1,&data)) != GT_OK)
            {
                DBG_INFO(("Not able to read Phy Register.\n"));
                return status;
            }

            BIT_2_BOOL(data, *autoOn);
            data ^= 0x1;    /* toggle bit 0 */

            if (*autoOn) /* Auto On */
            {
                if((status= hwSetPhyRegField(dev,hwPort,22,15,1,data)) != GT_OK)
                {
                    DBG_INFO(("Not able to write Phy Register.\n"));
                    return status;
                }
            }

            break;

        case GT_PHY_NO_PAGE:
        default:
            /* Nothing to do */
            return GT_OK;
    }


    if((status= hwGetPhyRegField(dev,hwPort,22,0,8,pageReg)) != GT_OK)
    {
        DBG_INFO(("Not able to read Phy Register.\n"));
        return status;
    }

    return GT_OK;
}


/*******************************************************************************
* driverPagedAccessStop
*
* DESCRIPTION:
*       This function restores page register and Auto Reg Selection mode if needed.
*
* INPUTS:
*       hwPort     - port number where the Phy is connected
*        pageType - type of the page registers
*       autoOn     - GT_TRUE if Auto Reg Selection enabled, GT_FALSE otherwise.
*        pageReg  - Page Register Data
*
* OUTPUTS:
*        None.
*
* RETURNS:
*       GT_OK     - if success
*       GT_FAIL - othrwise.
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS driverPagedAccessStop
(
    IN  GT_QD_DEV    *dev,
    IN    GT_U8         hwPort,
    IN    GT_U8         pageType,
    IN    GT_BOOL         autoOn,
    IN    GT_U16         pageReg
)
{
    GT_U16 data;
    GT_STATUS status;

    switch(pageType)
    {
        case GT_PHY_PAGE_WRITE_BACK:
            break;
        case GT_PHY_PAGE_DIS_AUTO1:    /* 88E1111 Type */
            if (autoOn) /* Auto On */
            {
                data = 0;
                if((status= hwSetPhyRegField(dev,hwPort,27,9,1,data)) != GT_OK)
                {
                    DBG_INFO(("Not able to write Phy Register.\n"));
                    return status;
                }
            }

            break;
        case GT_PHY_PAGE_DIS_AUTO2:    /* 88E1112 Type */
            if (autoOn) /* Auto On */
            {
                data = 1;
                if((status= hwSetPhyRegField(dev,hwPort,22,15,1,data)) != GT_OK)
                {
                    DBG_INFO(("Not able to write Phy Register.\n"));
                    return status;
                }
            }

            break;

        case GT_PHY_NO_PAGE:
        default:
            /* Nothing to do */
            return GT_OK;
    }


    if((status= hwSetPhyRegField(dev,hwPort,22,0,8,pageReg)) != GT_OK)
    {
        DBG_INFO(("Not able to write Phy Register.\n"));
        return status;
    }

    return GT_OK;
}


/*******************************************************************************
* driverFindPhyInformation
*
* DESCRIPTION:
*       This function gets information of Phy connected to the given port.
*        PhyInfo structure should have valid Phy ID.
*
* INPUTS:
*       hwPort    - port number where the Phy is connected
*
* OUTPUTS:
*       phyId    - Phy ID
*
* RETURNS:
*       GT_OK     - if found Marvell Phy,
*       GT_FAIL - othrwise.
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS driverFindPhyInformation
(
    IN  GT_QD_DEV    *dev,
    IN    GT_U8         hwPort,
    OUT    GT_PHY_INFO     *phyInfo
)
{
    GT_U32 phyId;
    GT_U16 data;

    phyId = phyInfo->phyId;

    switch (phyId & PHY_MODEL_MASK)
    {
        case DEV_E3082:
        case DEV_MELODY:
                phyInfo->anyPage = 0xFFFFFFFF;
                phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_EXTERNAL_LOOP|
                                GT_PHY_COPPER;
                phyInfo->vctType = GT_PHY_VCT_TYPE1;
                phyInfo->exStatusType = 0;
                if ((phyId & PHY_REV_MASK) < 9)
                    phyInfo->dteType = GT_PHY_DTE_TYPE1;    /* need workaround */
                else
                    phyInfo->dteType = GT_PHY_DTE_TYPE5;

                phyInfo->pktGenType = 0;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_NO_PAGE;
                break;

        case DEV_E104X:
                phyInfo->anyPage = 0xFFFFFFFF;
                phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_GIGABIT|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_EXTERNAL_LOOP;

                phyInfo->dteType = 0;
                if ((phyId & PHY_REV_MASK) < 3)
                    phyInfo->flag &= ~GT_PHY_VCT_CAPABLE; /* VCT is not supported */
                else if ((phyId & PHY_REV_MASK) == 3)
                    phyInfo->vctType = GT_PHY_VCT_TYPE3;    /* Need workaround */
                else
                    phyInfo->vctType = GT_PHY_VCT_TYPE2;
                phyInfo->exStatusType = 0;

                phyInfo->pktGenType = 0;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_NO_PAGE;

                break;

        case DEV_E1111:
                phyInfo->anyPage = 0xFFF1FE0C;
                phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                GT_PHY_EX_CABLE_STATUS|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                GT_PHY_GIGABIT|GT_PHY_RESTRICTED_PAGE;

                phyInfo->vctType = GT_PHY_VCT_TYPE2;
                phyInfo->exStatusType = GT_PHY_EX_STATUS_TYPE1;
                if ((phyId & PHY_REV_MASK) < 2)
                    phyInfo->dteType = GT_PHY_DTE_TYPE3;    /* Need workaround */
                else
                    phyInfo->dteType = GT_PHY_DTE_TYPE2;

                phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE1;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_PAGE_DIS_AUTO1;
                break;

        case DEV_E1112:
                phyInfo->anyPage = 0x1BC0780C;
                phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                GT_PHY_EX_CABLE_STATUS|
                                GT_PHY_GIGABIT|GT_PHY_RESTRICTED_PAGE|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                GT_PHY_PKT_GENERATOR;

                phyInfo->vctType = GT_PHY_VCT_TYPE4;
                phyInfo->exStatusType = GT_PHY_EX_STATUS_TYPE2;
                phyInfo->dteType = GT_PHY_DTE_TYPE4;

                phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE2;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_PAGE_DIS_AUTO2;
                break;

        case DEV_E114X:
                phyInfo->anyPage = 0x2FF1FE0C;
                phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                GT_PHY_EX_CABLE_STATUS|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                GT_PHY_GIGABIT|GT_PHY_RESTRICTED_PAGE;

                phyInfo->vctType = GT_PHY_VCT_TYPE2;
                phyInfo->exStatusType = GT_PHY_EX_STATUS_TYPE1;
                if ((phyId & PHY_REV_MASK) < 4)
                    phyInfo->dteType = GT_PHY_DTE_TYPE3;    /* Need workaround */
                else
                    phyInfo->dteType = GT_PHY_DTE_TYPE2;

                phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE1;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_PAGE_DIS_AUTO1;

                break;

        case DEV_E1149:
                phyInfo->anyPage = 0x2040FFFF;
                phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                GT_PHY_EX_CABLE_STATUS|
                                GT_PHY_GIGABIT|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                GT_PHY_PKT_GENERATOR;
                phyInfo->vctType = GT_PHY_VCT_TYPE4;
                phyInfo->exStatusType = GT_PHY_EX_STATUS_TYPE3;
                phyInfo->dteType = GT_PHY_DTE_TYPE4;
                phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE2;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_PAGE_WRITE_BACK;
                break;

        case DEV_G15LV:
                if (dev->devName1 &DEV_88E6108)
                {
                    phyInfo->anyPage = 0x0000FFFF;
                    phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                    GT_PHY_EX_CABLE_STATUS|
                                    GT_PHY_GIGABIT|
                                    GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                    GT_PHY_PKT_GENERATOR;
                    phyInfo->vctType = GT_PHY_VCT_TYPE4;
                    phyInfo->exStatusType = GT_PHY_EX_STATUS_TYPE3;
                    phyInfo->dteType = GT_PHY_DTE_TYPE4;
                    phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE2;
                    phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                    phyInfo->lineLoopType = 0;
                    phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                    phyInfo->pageType = GT_PHY_PAGE_WRITE_BACK;
                }
                else /* 88E6165 family */
                {
                    phyInfo->anyPage = 0x0000FFFF;
                    phyInfo->flag = GT_PHY_ADV_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                    GT_PHY_EX_CABLE_STATUS|
                                    GT_PHY_GIGABIT|
                                    GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                    GT_PHY_PKT_GENERATOR;
                    phyInfo->vctType = GT_PHY_ADV_VCT_TYPE2;
                    phyInfo->exStatusType = GT_PHY_EX_STATUS_TYPE6;
                    phyInfo->dteType = GT_PHY_DTE_TYPE4;
                    phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE2;
                    phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                    phyInfo->lineLoopType = 0;
                    phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                    phyInfo->pageType = GT_PHY_PAGE_WRITE_BACK;
                }
                break;

        case DEV_EC010:
                phyInfo->anyPage = 0x2040780C;
                phyInfo->flag = GT_PHY_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                GT_PHY_EX_CABLE_STATUS|
                                GT_PHY_GIGABIT|GT_PHY_RESTRICTED_PAGE|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP;
                phyInfo->vctType = GT_PHY_VCT_TYPE2;
                phyInfo->exStatusType = 0;
                phyInfo->dteType = GT_PHY_DTE_TYPE3;    /* Need workaround */
                phyInfo->pktGenType = 0;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_PAGE_WRITE_BACK;
                break;

        case DEV_S15LV:
                phyInfo->anyPage = 0xFFFFFFFF;
                phyInfo->flag = GT_PHY_SERDES_CORE|GT_PHY_GIGABIT|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                GT_PHY_PKT_GENERATOR;
                phyInfo->vctType = 0;
                phyInfo->exStatusType = 0;
                phyInfo->dteType = 0;
                phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE3;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE3;
                phyInfo->lineLoopType = GT_PHY_LINE_LB_TYPE4;
                phyInfo->exLoopType = 0;
                phyInfo->pageType = GT_PHY_NO_PAGE;
                break;

        case DEV_G65G:
        case DEV_E1540:
                phyInfo->anyPage = 0x0000FFFF;
                phyInfo->flag = GT_PHY_ADV_VCT_CAPABLE|GT_PHY_DTE_CAPABLE|
                                GT_PHY_EX_CABLE_STATUS|
                                GT_PHY_GIGABIT|
                                GT_PHY_MAC_IF_LOOP|GT_PHY_LINE_LOOP|GT_PHY_EXTERNAL_LOOP|
                                GT_PHY_PKT_GENERATOR;
                phyInfo->vctType = GT_PHY_ADV_VCT_TYPE2;
                phyInfo->exStatusType = GT_PHY_EX_STATUS_TYPE6;
                phyInfo->dteType = GT_PHY_DTE_TYPE4;
                phyInfo->pktGenType = GT_PHY_PKTGEN_TYPE2;
                phyInfo->macIfLoopType = GT_PHY_LOOPBACK_TYPE1;
                phyInfo->lineLoopType = 0;
                phyInfo->exLoopType = GT_PHY_EX_LB_TYPE0;
                phyInfo->pageType = GT_PHY_PAGE_WRITE_BACK;
                break;
        default:
            return GT_FAIL;
    }

    if (phyInfo->flag & GT_PHY_GIGABIT)
    {
        if(hwGetPhyRegField(dev,hwPort,15,12,4,&data) != GT_OK)
        {
            DBG_INFO(("Not able to read Phy Reg(port:%d,offset:%d).\n",hwPort,15));
               return GT_FAIL;
        }

        if(data & QD_GIGPHY_1000X_CAP)
            phyInfo->flag |= GT_PHY_FIBER;

        if(data & QD_GIGPHY_1000T_CAP)
        {
            phyInfo->flag |= GT_PHY_COPPER;
        }
        else
        {
            phyInfo->flag &= ~(GT_PHY_VCT_CAPABLE|GT_PHY_EX_CABLE_STATUS|GT_PHY_DTE_CAPABLE|GT_PHY_ADV_VCT_CAPABLE);
        }
    }

    return GT_OK;
}