blob: 4e1318871a8d9f7f6f329800d6394158e42f85dd [file] [log] [blame]
The U-Boot Driver Model Project
===============================
Driver cores API document
=========================
Pavel Herrmann <morpheus.ibis@gmail.com>
1) Overview
-----------
Driver cores will be used as a wrapper for devices of the same type, and as
an abstraction for device driver APIs. For each driver API (which roughly
correspond to device types), there will be one driver core. Each driver core
will implement three APIs - a driver API (which will be the same as API of
drivers the core wraps around), a core API (which will be implemented by all
cores) and a command API (core-specific API which will be exposed to
commands).
A) Command API
The command API will provide access to shared functionality for a specific
device, which is currently located mostly in commands. Commands will be
rewritten to be more lightweight by using this API. As this API will be
different for each core, it is out of scope of this document.
B) Driver API
The driver API will act as a wrapper around actual device drivers,
providing a single entrypoint for device access. All functions in this API
have an instance* argument (probably called "this" or "i"), which will be
examined by the core, and a correct function for the specified driver will
get called.
If the core gets called with a group instance pointer (as discussed in
design), it will automatically select the instance that is associated
with this core, and use it as target of the call. if the group contains
multiple instances of a single type, the caller must explicitly use an
accessor to select the correct instance.
This accessor will look like:
struct instance *get_instance_from_group(struct instance *group, int i)
When called with a non-group instance, it will simply return the instance.
C) Core API
The core API will be implemented by all cores, and will provide
functionality for getting driver instances from non-driver code. This API
will consist of following functions:
int get_count(struct instance *core);
struct instance* get_instance(struct instance *core, int index);
int init(struct instance *core);
int bind(struct instance *core, struct instance *dev, void *ops,
void *hint);
int unbind(struct instance *core, instance *dev);
int replace(struct instance *core, struct_instance *new_dev,
struct instance *old_dev);
int destroy(struct instance *core);
int reloc(struct instance *new_core, struct instance *old_core);
The 'hint' parameter of bind() serves for additional data a driver can
pass to the core, to help it create the correct internal state for this
instance. the replace() function will get called during instance
relocation, and will replace the old instance with the new one, keeping
the internal state untouched.
2) Lifetime of a driver core
----------------------------
Driver cores will be initialized at runtime, to limit memory footprint in
early-init stage, when we have to fit into ~1KB of memory. All active cores
will be stored in a tree structure (referenced as "Core tree") in global data,
which provides good tradeoff between size and access time.
Every core will have a number constant associated with it, which will be used
to find the instance in Core tree, and to refer to the core in all calls
working with the Core tree.
The Core Tree should be implemented using B-tree (or a similar structure)
to guarantee acceptable time overhead in all cases.
Code for working with the core (i2c in this example) follows:
core_init(CORE_I2C);
This will check whether we already have a i2c core, and if not it creates
a new instance and adds it into the Core tree. This will not be exported,
all code should depend on get_core_instance to init the core when
necessary.
get_core_instance(CORE_I2C);
This is an accessor into the Core tree, which will return the instance
of i2c core, creating it if necessary
core_bind(CORE_I2C, instance, driver_ops);
This will get called in bind() function of a driver, and will add the
instance into cores internal list of devices. If the core is not found, it
will get created.
driver_activate(instance *inst);
This call will recursively activate all devices necessary for using the
specified device. the code could be simplified as:
{
if (is_activated(inst))
return;
driver_activate(inst->bus);
get_driver(inst)->probe(inst);
}
The case with multiple parents will need to be handled here as well.
get_driver is an accessor to available drivers, which will get struct
driver based on a name in the instance.
i2c_write(instance *inst, ...);
An actual call to some method of the driver. This code will look like:
{
driver_activate(inst);
struct instance *core = get_core_instance(CORE_I2C);
device_ops = get_ops(inst);
device_ops->write(...);
}
get_ops will not be an exported function, it will be internal and specific
to the core, as it needs to know how are the ops stored, and what type
they are.
Please note that above examples represent the algorithm, not the actual code,
as they are missing checks for validity of return values.
core_init() function will get called the first time the core is requested,
either by core_link() or core_get_instance(). This way, the cores will get
created only when they are necessary, which will reduce our memory footprint.