blob: fd3b16ea50a6d7629f583d6ce6e1525ed28062d8 [file] [log] [blame]
/*
* (C) Copyright 2004
* Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
*
* Support for the Elmeg VoVPN Gateway Module
* ------------------------------------------
* This is a signle bank flashdriver for INTEL 28F320J3, 28F640J3
* and 28F128J3A flashs working in 8 Bit mode.
*
* Most of this code is taken from existing u-boot source code.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
#define FLASH_CMD_READ_ID 0x90
#define FLASH_CMD_READ_STATUS 0x70
#define FLASH_CMD_RESET 0xff
#define FLASH_CMD_BLOCK_ERASE 0x20
#define FLASH_CMD_ERASE_CONFIRM 0xd0
#define FLASH_CMD_CLEAR_STATUS 0x50
#define FLASH_CMD_SUSPEND_ERASE 0xb0
#define FLASH_CMD_WRITE 0x40
#define FLASH_CMD_WRITE_BUFF 0xe8
#define FLASH_CMD_PROG_RESUME 0xd0
#define FLASH_CMD_PROTECT 0x60
#define FLASH_CMD_PROTECT_SET 0x01
#define FLASH_CMD_PROTECT_CLEAR 0xd0
#define FLASH_STATUS_DONE 0x80
#define FLASH_WRITE_BUFFER_SIZE 32
#ifdef CONFIG_SYS_FLASH_16BIT
#define FLASH_WORD_SIZE unsigned short
#define FLASH_ID_MASK 0xffff
#define FLASH_CMD_ADDR_SHIFT 0
#else
#define FLASH_WORD_SIZE unsigned char
#define FLASH_ID_MASK 0xff
/* A0 is not used in either 8x or 16x for READ ID */
#define FLASH_CMD_ADDR_SHIFT 1
#endif
static unsigned long
flash_get(volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
{
volatile FLASH_WORD_SIZE *p;
FLASH_WORD_SIZE value;
int i;
addr[0] = FLASH_CMD_READ_ID;
/* manufactor */
value = addr[0 << FLASH_CMD_ADDR_SHIFT];
switch (value) {
case (INTEL_MANUFACT & FLASH_ID_MASK):
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
*addr = FLASH_CMD_RESET;
return (0);
}
/* device */
value = addr[1 << FLASH_CMD_ADDR_SHIFT];
switch (value) {
case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000;
break;
case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
break;
case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
*addr = FLASH_CMD_RESET;
return (0);
}
/* setup sectors */
for (i = 0; i < info->sector_count; i++) {
info->start[i] = (unsigned long)addr + (i * info->size/info->sector_count);
}
/* check protected sectors */
for (i = 0; i < info->sector_count; i++) {
p = (volatile FLASH_WORD_SIZE *)(info->start[i]);
info->protect[i] = p[2 << FLASH_CMD_ADDR_SHIFT] & 1;
}
/* reset bank */
*addr = FLASH_CMD_RESET;
return (info->size);
}
unsigned long
flash_init(void)
{
unsigned long size;
int i;
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
size = flash_get((volatile FLASH_WORD_SIZE *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH Size=0x%08lx\n", size);
return (0);
}
/* always protect 1 sector containing the HRCW */
flash_protect(FLAG_PROTECT_SET,
flash_info[0].start[0],
flash_info[0].start[1] - 1,
&flash_info[0]);
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_FLASH,
CONFIG_SYS_MONITOR_FLASH+CONFIG_SYS_MONITOR_LEN-1,
&flash_info[0]);
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
&flash_info[0]);
#endif
return (size);
}
void
flash_print_info(flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL: printf ("INTEL "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F320J3A: printf ("28F320JA3 (32 Mbit)\n");
break;
case FLASH_28F640J3A: printf ("28F640JA3 (64 Mbit)\n");
break;
case FLASH_28F128J3A: printf ("28F128JA3 (128 Mbit)\n");
break;
default: printf ("Unknown Chip Type");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " "
);
}
printf ("\n");
}
int
flash_erase(flash_info_t *info, int s_first, int s_last)
{
unsigned long start, now, last;
int flag, prot, sect;
volatile FLASH_WORD_SIZE *addr;
FLASH_WORD_SIZE status;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return (1);
}
if (info->flash_id == FLASH_UNKNOWN) {
printf ("Cannot erase unknown flash - aborted\n");
return (1);
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
start = get_timer (0);
last = start;
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect]) {
continue;
}
addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
#ifdef DEBUG
printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
#endif
*addr = FLASH_CMD_CLEAR_STATUS;
*addr = FLASH_CMD_BLOCK_ERASE;
*addr = FLASH_CMD_ERASE_CONFIRM;
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Flash erase timeout at address %lx\n", info->start[sect]);
*addr = FLASH_CMD_SUSPEND_ERASE;
*addr = FLASH_CMD_RESET;
return (1);
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
*addr = FLASH_CMD_RESET;
}
printf (" done\n");
return (0);
}
static int
write_buff2( volatile FLASH_WORD_SIZE *dst,
volatile FLASH_WORD_SIZE *src,
unsigned long cnt )
{
unsigned long start;
FLASH_WORD_SIZE status;
int flag, i;
start = get_timer (0);
while (1) {
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
dst[0] = FLASH_CMD_WRITE_BUFF;
if ((status = *dst) & FLASH_STATUS_DONE) {
break;
}
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (-1);
}
}
dst[0] = (FLASH_WORD_SIZE)(cnt - 1);
for (i=0; i<cnt; i++) {
dst[i] = src[i];
}
dst[0] = FLASH_CMD_PROG_RESUME;
if (flag) {
enable_interrupts();
}
return( 0 );
}
static int
poll_status( volatile FLASH_WORD_SIZE *addr )
{
unsigned long start;
start = get_timer (0);
/* wait for error or finish */
while (1) {
if (*addr == FLASH_STATUS_DONE) {
if (*addr == FLASH_STATUS_DONE) {
break;
}
}
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = FLASH_CMD_RESET;
return (-1);
}
}
*addr = FLASH_CMD_RESET;
return (0);
}
/*
* write_buff return values:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
* 4 - Flash not identified
*/
int
write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt)
{
volatile FLASH_WORD_SIZE *addr, *dst;
unsigned long bcnt;
int flag, i;
if (info->flash_id == FLASH_UNKNOWN) {
return (4);
}
addr = (volatile FLASH_WORD_SIZE *)(info->start[0]);
dst = (volatile FLASH_WORD_SIZE *) udst;
#ifdef CONFIG_SYS_FLASH_16BIT
#error NYI
#else
while (cnt > 0) {
/* Check if buffer write is possible */
if (cnt > 1 && (((unsigned long)dst & (FLASH_WRITE_BUFFER_SIZE - 1)) == 0)) {
bcnt = cnt > FLASH_WRITE_BUFFER_SIZE ? FLASH_WRITE_BUFFER_SIZE : cnt;
/* Check if Flash is (sufficiently) erased */
for (i=0; i<bcnt; i++) {
if ((dst[i] & src[i]) != src[i]) {
return (2);
}
}
if (write_buff2( dst,src,bcnt ) != 0) {
addr[0] = FLASH_CMD_READ_STATUS;
}
if (poll_status( dst ) != 0) {
return (1);
}
cnt -= bcnt;
dst += bcnt;
src += bcnt;
continue;
}
/* Check if Flash is (sufficiently) erased */
if ((*dst & *src) != *src) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr[0] = FLASH_CMD_ERASE_CONFIRM;
addr[0] = FLASH_CMD_WRITE;
*dst++ = *src++;
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
if (poll_status( dst ) != 0) {
return (1);
}
cnt --;
}
#endif
return (0);
}
int
flash_real_protect(flash_info_t *info, long sector, int prot)
{
volatile FLASH_WORD_SIZE *addr;
unsigned long start;
addr = (volatile FLASH_WORD_SIZE *)(info->start[sector]);
*addr = FLASH_CMD_CLEAR_STATUS;
*addr = FLASH_CMD_PROTECT;
if(prot) {
*addr = FLASH_CMD_PROTECT_SET;
} else {
*addr = FLASH_CMD_PROTECT_CLEAR;
}
/* wait for error or finish */
start = get_timer (0);
while(!(addr[0] & FLASH_STATUS_DONE)){
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Flash protect timeout at address %lx\n", info->start[sector]);
addr[0] = FLASH_CMD_RESET;
return (1);
}
}
/* Set software protect flag */
info->protect[sector] = prot;
*addr = FLASH_CMD_RESET;
return (0);
}