| /* |
| * Copyright (C) 2006, 2008 Atmel Corporation |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| #ifndef __ASM_AVR32_ARCH_PORTMUX_H__ |
| #define __ASM_AVR32_ARCH_PORTMUX_H__ |
| |
| #include <asm/arch/gpio.h> |
| |
| #define PORTMUX_PORT_A ((void *)ATMEL_BASE_PIOA) |
| #define PORTMUX_PORT_B ((void *)ATMEL_BASE_PIOB) |
| #define PORTMUX_PORT_C ((void *)ATMEL_BASE_PIOC) |
| #define PORTMUX_PORT_D ((void *)ATMEL_BASE_PIOD) |
| #define PORTMUX_PORT_E ((void *)ATMEL_BASE_PIOE) |
| |
| void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width, |
| unsigned long flags, unsigned long drive_strength); |
| |
| #define PORTMUX_EBI_CS(x) (1 << (x)) |
| #define PORTMUX_EBI_NAND (1 << 6) |
| #define PORTMUX_EBI_CF(x) (1 << ((x) + 7)) |
| #define PORTMUX_EBI_NWAIT (1 << 9) |
| |
| #ifdef AT32AP700x_CHIP_HAS_USART |
| static inline void portmux_enable_usart0(unsigned long drive_strength) |
| { |
| portmux_select_peripheral(PORTMUX_PORT_A, (1 << 8) | (1 << 9), |
| PORTMUX_FUNC_B, 0); |
| } |
| |
| static inline void portmux_enable_usart1(unsigned long drive_strength) |
| { |
| portmux_select_peripheral(PORTMUX_PORT_A, (1 << 17) | (1 << 18), |
| PORTMUX_FUNC_A, 0); |
| } |
| |
| static inline void portmux_enable_usart2(unsigned long drive_strength) |
| { |
| portmux_select_peripheral(PORTMUX_PORT_B, (1 << 26) | (1 << 27), |
| PORTMUX_FUNC_B, 0); |
| } |
| |
| static inline void portmux_enable_usart3(unsigned long drive_strength) |
| { |
| portmux_select_peripheral(PORTMUX_PORT_B, (1 << 17) | (1 << 18), |
| PORTMUX_FUNC_B, 0); |
| } |
| #endif |
| #ifdef AT32AP700x_CHIP_HAS_MACB |
| void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength); |
| void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength); |
| |
| #define PORTMUX_MACB_RMII (0) |
| #define PORTMUX_MACB_MII (1 << 0) |
| #define PORTMUX_MACB_SPEED (1 << 1) |
| |
| #endif |
| #ifdef AT32AP700x_CHIP_HAS_MMCI |
| void portmux_enable_mmci(unsigned int slot, unsigned long flags, |
| unsigned long drive_strength); |
| |
| #define PORTMUX_MMCI_4BIT (1 << 0) |
| #define PORTMUX_MMCI_8BIT (PORTMUX_MMCI_4BIT | (1 << 1)) |
| #define PORTMUX_MMCI_EXT_PULLUP (1 << 2) |
| |
| #endif |
| #ifdef AT32AP700x_CHIP_HAS_SPI |
| void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength); |
| void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength); |
| #endif |
| #ifdef AT32AP700x_CHIP_HAS_LCDC |
| void portmux_enable_lcdc(int pin_config); |
| #endif |
| |
| #endif /* __ASM_AVR32_ARCH_PORTMUX_H__ */ |