blob: 7a0b6559e09678c05d69b50212985a4f318686cb [file] [log] [blame]
/*
* Copyright (C) 2006 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_AVR32_ARCH_CLK_H__
#define __ASM_AVR32_ARCH_CLK_H__
#include <asm/arch/chip-features.h>
#include <asm/arch/portmux.h>
#ifdef CONFIG_PLL
#define PLL0_RATE ((CONFIG_SYS_OSC0_HZ / CONFIG_SYS_PLL0_DIV) \
* CONFIG_SYS_PLL0_MUL)
#define MAIN_CLK_RATE PLL0_RATE
#else
#define MAIN_CLK_RATE (CONFIG_SYS_OSC0_HZ)
#endif
static inline unsigned long get_cpu_clk_rate(void)
{
return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_CPU;
}
static inline unsigned long get_hsb_clk_rate(void)
{
return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB;
}
static inline unsigned long get_pba_clk_rate(void)
{
return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBA;
}
static inline unsigned long get_pbb_clk_rate(void)
{
return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBB;
}
/* Accessors for specific devices. More will be added as needed. */
static inline unsigned long get_sdram_clk_rate(void)
{
return get_hsb_clk_rate();
}
#ifdef AT32AP700x_CHIP_HAS_USART
static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
{
return get_pba_clk_rate();
}
#endif
#ifdef AT32AP700x_CHIP_HAS_MACB
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
{
return get_pbb_clk_rate();
}
static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
{
return get_hsb_clk_rate();
}
#endif
#ifdef AT32AP700x_CHIP_HAS_MMCI
static inline unsigned long get_mci_clk_rate(void)
{
return get_pbb_clk_rate();
}
#endif
#ifdef AT32AP700x_CHIP_HAS_SPI
static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
{
return get_pba_clk_rate();
}
#endif
#ifdef AT32AP700x_CHIP_HAS_LCDC
static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
{
return get_hsb_clk_rate();
}
#endif
extern void clk_init(void);
/* Board code may need the SDRAM base clock as a compile-time constant */
#define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB)
/* Generic clock control */
enum gclk_parent {
GCLK_PARENT_OSC0 = 0,
GCLK_PARENT_OSC1 = 1,
GCLK_PARENT_PLL0 = 2,
GCLK_PARENT_PLL1 = 3,
};
/* Some generic clocks have specific roles */
#define GCLK_DAC_SAMPLE_CLK 6
#define GCLK_LCDC_PIXCLK 7
extern unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
unsigned long rate, unsigned long parent_rate);
/**
* gclk_set_rate - configure and enable a generic clock
* @id: Which GCLK[id] to enable
* @parent: Parent clock feeding the GCLK
* @rate: Target rate of the GCLK in Hz
*
* Returns the actual GCLK rate in Hz, after rounding to the nearest
* supported rate.
*
* All three parameters are usually constant, hence the inline.
*/
static inline unsigned long gclk_set_rate(unsigned int id,
enum gclk_parent parent, unsigned long rate)
{
unsigned long parent_rate;
if (id > 7)
return 0;
switch (parent) {
case GCLK_PARENT_OSC0:
parent_rate = CONFIG_SYS_OSC0_HZ;
break;
#ifdef CONFIG_SYS_OSC1_HZ
case GCLK_PARENT_OSC1:
parent_rate = CONFIG_SYS_OSC1_HZ;
break;
#endif
#ifdef PLL0_RATE
case GCLK_PARENT_PLL0:
parent_rate = PLL0_RATE;
break;
#endif
#ifdef PLL1_RATE
case GCLK_PARENT_PLL1:
parent_rate = PLL1_RATE;
break;
#endif
default:
parent_rate = 0;
break;
}
return __gclk_set_rate(id, parent, rate, parent_rate);
}
/**
* gclk_enable_output - enable output on a GCLK pin
* @id: Which GCLK[id] pin to enable
* @drive_strength: Drive strength of external GCLK pin, if applicable
*/
static inline void gclk_enable_output(unsigned int id,
unsigned long drive_strength)
{
switch (id) {
case 0:
portmux_select_peripheral(PORTMUX_PORT_A, 1 << 30,
PORTMUX_FUNC_A, drive_strength);
break;
case 1:
portmux_select_peripheral(PORTMUX_PORT_A, 1 << 31,
PORTMUX_FUNC_A, drive_strength);
break;
case 2:
portmux_select_peripheral(PORTMUX_PORT_B, 1 << 19,
PORTMUX_FUNC_A, drive_strength);
break;
case 3:
portmux_select_peripheral(PORTMUX_PORT_B, 1 << 29,
PORTMUX_FUNC_A, drive_strength);
break;
case 4:
portmux_select_peripheral(PORTMUX_PORT_B, 1 << 30,
PORTMUX_FUNC_A, drive_strength);
break;
}
}
#endif /* __ASM_AVR32_ARCH_CLK_H__ */