/******************************************************************************
 *
 * Name:	skgesirq.c
 * Project:	Gigabit Ethernet Adapters, Common Modules
 * Version:	$Revision: 2.30 $
 * Date:	$Date: 2006/04/27 07:52:20 $
 * Purpose:	Special IRQ module
 *
 ******************************************************************************/

/******************************************************************************
 *
 *	LICENSE:
 *	(C)Copyright 1998-2002 SysKonnect.
 *	(C)Copyright 2002-2006 Marvell.
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *	The information in this file is provided "AS IS" without warranty.
 *	/LICENSE
 *
 ******************************************************************************/

/*
 *	Special Interrupt handler
 *
 *	The following abstract should show how this module is included
 *	in the driver path:
 *
 *	In the ISR of the driver the bits for frame transmission complete and
 *	for receive complete are checked and handled by the driver itself.
 *	The bits of the slow path mask are checked after that and then the
 *	entry into the so-called "slow path" is prepared. It is an implementors
 *	decision whether this is executed directly or just scheduled by
 *	disabling the mask. In the interrupt service routine some events may be
 *	generated, so it would be a good idea to call the EventDispatcher
 *	right after this ISR.
 *
 *	The Interrupt source register of the adapter is NOT read by this module.
 *	SO if the drivers implementor needs a while loop around the
 *	slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for
 *	each loop entered.
 *
 *	However, the MAC Interrupt status registers are read in a while loop.
 *
 */
#include <config.h>

#ifdef CONFIG_SK98

#include "h/skdrv1st.h"		/* Driver Specific Definitions */
#ifndef SK_SLIM
#include "h/skgepnmi.h"		/* PNMI Definitions */
#include "h/skrlmt.h"		/* RLMT Definitions */
#endif
#include "h/skdrv2nd.h"		/* Adapter Control and Driver specific Def. */

/* local variables ************************************************************/

#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
static const char SysKonnectFileId[] =
	"@(#) $Id: skgesirq.c,v 2.30 2006/04/27 07:52:20 malthoff Exp $ (C) Marvell.";
#endif

/* local function prototypes */
#ifdef GENESIS
static int	SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL);
static int	SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL);
static void	SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16);
#endif /* GENESIS */
#ifdef YUKON
static int	SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL);
static void	SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16);
#endif /* YUKON */
#ifdef OTHER_PHY
static int	SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL);
static int	SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL);
static void	SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16);
#endif /* OTHER_PHY */

#ifdef GENESIS
/*
 * array of Rx counter from XMAC which are checked
 * in AutoSense mode to check whether a link is not able to auto-negotiate.
 */
static const SK_U16 SkGeRxRegs[]= {
	XM_RXF_64B,
	XM_RXF_127B,
	XM_RXF_255B,
	XM_RXF_511B,
	XM_RXF_1023B,
	XM_RXF_MAX_SZ
};
#endif /* GENESIS */

#ifdef __C2MAN__
/*
 *	Special IRQ function
 *
 *	General Description:
 *
 */
intro()
{}
#endif

/******************************************************************************
 *
 *	SkHWInitDefSense() - Default Autosensing mode initialization
 *
 * Description: sets the PLinkMode for HWInit
 *
 * Returns: N/A
 */
static void SkHWInitDefSense(
SK_AC	*pAC,	/* Adapter Context */
SK_IOC	IoC,	/* I/O context */
int		Port)	/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */

	pPrt = &pAC->GIni.GP[Port];

	pPrt->PAutoNegTimeOut = 0;

	if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
		pPrt->PLinkMode = pPrt->PLinkModeConf;
		return;
	}

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
		("AutoSensing: First mode %d on Port %d\n",
		(int)SK_LMODE_AUTOFULL, Port));

	pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;

	return;
}	/* SkHWInitDefSense */


#ifdef GENESIS
/******************************************************************************
 *
 *	SkHWSenseGetNext() - Get Next Autosensing Mode
 *
 * Description: gets the appropriate next mode
 *
 * Note:
 *
 */
static SK_U8 SkHWSenseGetNext(
SK_AC	*pAC,	/* Adapter Context */
SK_IOC	IoC,	/* I/O context */
int		Port)	/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */

	pPrt = &pAC->GIni.GP[Port];

	pPrt->PAutoNegTimeOut = 0;

	if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
		/* Leave all as configured */
		return(pPrt->PLinkModeConf);
	}

	if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) {
		/* Return next mode AUTOBOTH */
		return((SK_U8)SK_LMODE_AUTOBOTH);
	}

	/* Return default autofull */
	return((SK_U8)SK_LMODE_AUTOFULL);
}	/* SkHWSenseGetNext */


/******************************************************************************
 *
 *	SkHWSenseSetNext() - Autosensing Set next mode
 *
 * Description:	sets the appropriate next mode
 *
 * Returns: N/A
 */
static void SkHWSenseSetNext(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O context */
int		Port,		/* Port Index (MAC_1 + n) */
SK_U8	NewMode)	/* New Mode to be written in sense mode */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */

	pPrt = &pAC->GIni.GP[Port];

	pPrt->PAutoNegTimeOut = 0;

	if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
		return;
	}

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
		("AutoSensing: next mode %d on Port %d\n",
		(int)NewMode, Port));

	pPrt->PLinkMode = NewMode;

	return;
}	/* SkHWSenseSetNext */
#endif /* GENESIS */


/******************************************************************************
 *
 *	SkHWLinkDown() - Link Down handling
 *
 * Description: handles the hardware link down signal
 *
 * Returns: N/A
 */
void SkHWLinkDown(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O context */
int		Port)		/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */

	pPrt = &pAC->GIni.GP[Port];

	/* Disable all MAC interrupts */
	SkMacIrqDisable(pAC, IoC, Port);

	/* Disable Receiver and Transmitter */
	SkMacRxTxDisable(pAC, IoC, Port);

	/* Init default sense mode */
	SkHWInitDefSense(pAC, IoC, Port);

	if (!pPrt->PHWLinkUp) {
		return;
	}

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("Link down Port %d\n", Port));

	/* Set Link to DOWN */
	pPrt->PHWLinkUp = SK_FALSE;

#ifndef SK_SLIM
	/* Reset Port stati */
	pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
	pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED;
#endif /* !SK_SLIM */

	/* Re-init PHY especially when the AutoSense default is set now */
	SkMacInitPhy(pAC, IoC, Port, SK_FALSE);

	/* GP0: used for workaround of Rev. C Errata 2 */

	/* Do NOT signal to RLMT */

	/* Do NOT start the timer here */
}	/* SkHWLinkDown */


/******************************************************************************
 *
 *	SkHWLinkUp() - Link Up handling
 *
 * Description: handles the hardware link up signal
 *
 * Returns: N/A
 */
void SkHWLinkUp(
SK_AC	*pAC,	/* Adapter Context */
SK_IOC	IoC,	/* I/O context */
int		Port)	/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */

	pPrt = &pAC->GIni.GP[Port];

	if (pPrt->PHWLinkUp) {
		/* We do NOT need to proceed on active link */
		return;
	}

	pPrt->PHWLinkUp = SK_TRUE;

#ifndef SK_SLIM
	pPrt->PAutoNegFail = SK_FALSE;
	pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;

	if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF &&
		pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL &&
		pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) {
		/* Link is up and no Auto-negotiation should be done */

		/* Link speed should be the configured one */
		switch (pPrt->PLinkSpeed) {
		case SK_LSPEED_AUTO:
			/* default is 1000 Mbps */
		case SK_LSPEED_1000MBPS:
			pPrt->PLinkSpeedUsed = (SK_U8)
				((pPrt->PLinkSpeedCap & SK_LSPEED_CAP_1000MBPS) != 0) ?
				 SK_LSPEED_STAT_1000MBPS : SK_LSPEED_STAT_100MBPS;
			break;
		case SK_LSPEED_100MBPS:
			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
			break;
		case SK_LSPEED_10MBPS:
			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
			break;
		}

		/* Set Link Mode Status */
		pPrt->PLinkModeStatus = (SK_U8)
			((pPrt->PLinkMode == (SK_U8)SK_LMODE_FULL) ?
			 SK_LMODE_STAT_FULL : SK_LMODE_STAT_HALF);

		/* No flow control without auto-negotiation */
		pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
#endif /* !SK_SLIM */

		/* enable Rx/Tx */
		(void)SkMacRxTxEnable(pAC, IoC, Port);
#ifndef SK_SLIM
	}
#endif /* !SK_SLIM */
}	/* SkHWLinkUp */


/******************************************************************************
 *
 *	SkMacParity() - MAC parity workaround
 *
 * Description: handles MAC parity errors correctly
 *
 * Returns: N/A
 */
static void SkMacParity(
SK_AC	*pAC,	/* Adapter Context */
SK_IOC	IoC,	/* I/O context */
int		Port)	/* Port Index (MAC_1 + n) */
{
	SK_EVPARA	Para;
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_U32		TxMax;		/* Tx Max Size Counter */

	TxMax = 0;

	pPrt = &pAC->GIni.GP[Port];

	/* Clear IRQ Tx Parity Error */
#ifdef GENESIS
	if (pAC->GIni.GIGenesis) {

		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR);
	}
#endif /* GENESIS */

#ifdef YUKON
	if (pAC->GIni.GIYukon) {
		/* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T),
			(SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON &&
			pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE));
	}
#endif /* YUKON */

	if (pPrt->PCheckPar) {

		if (Port == MAC_1) {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG);
		}
		else {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG);
		}
		Para.Para64 = Port;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);

		Para.Para32[0] = Port;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);

		return;
	}

	/* Check whether frames with a size of 1k were sent */
#ifdef GENESIS
	if (pAC->GIni.GIGenesis) {
		/* Snap statistic counters */
		(void)SkXmUpdateStats(pAC, IoC, Port);

		(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax);
	}
#endif /* GENESIS */

#ifdef YUKON
	if (pAC->GIni.GIYukon) {

		(void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax);
	}
#endif /* YUKON */

	if (TxMax > 0) {
		/* From now on check the parity */
		pPrt->PCheckPar = SK_TRUE;
	}
}	/* SkMacParity */


/******************************************************************************
 *
 *	SkGeYuHwErr() - Hardware Error service routine (Genesis and Yukon)
 *
 * Description: handles all HW Error interrupts
 *
 * Returns: N/A
 */
static void SkGeYuHwErr(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O context */
SK_U32	HwStatus)	/* Interrupt status word */
{
	SK_EVPARA	Para;
	SK_U16		Word;

	if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) {
		/* PCI Errors occured */
		if ((HwStatus & IS_IRQ_STAT) != 0) {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG);
		}
		else {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG);
		}

		/* Reset all bits in the PCI STATUS register */
		SK_IN16(IoC, PCI_C(pAC, PCI_STATUS), &Word);

		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
		SK_OUT16(IoC, PCI_C(pAC, PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);

		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

#ifdef GENESIS
	if (pAC->GIni.GIGenesis) {

		if ((HwStatus & IS_NO_STAT_M1) != 0) {
			/* Ignore it */
			/* This situation is also indicated in the descriptor */
			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT);
		}

		if ((HwStatus & IS_NO_STAT_M2) != 0) {
			/* Ignore it */
			/* This situation is also indicated in the descriptor */
			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT);
		}

		if ((HwStatus & IS_NO_TIST_M1) != 0) {
			/* Ignore it */
			/* This situation is also indicated in the descriptor */
			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST);
		}

		if ((HwStatus & IS_NO_TIST_M2) != 0) {
			/* Ignore it */
			/* This situation is also indicated in the descriptor */
			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST);
		}
	}
#endif /* GENESIS */

#ifdef YUKON
	if (pAC->GIni.GIYukon) {
		/* This is necessary only for Rx timing measurements */
		if ((HwStatus & IS_IRQ_TIST_OV) != 0) {
			/* increment Time Stamp Timer counter (high) */
			pAC->GIni.GITimeStampCnt++;

			/* Clear Time Stamp Timer IRQ */
			SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ);
		}

		if ((HwStatus & IS_IRQ_SENSOR) != 0) {
			/* no sensors on 32-bit Yukon */
			if (pAC->GIni.GIYukon32Bit) {
				/* disable HW Error IRQ */
				pAC->GIni.GIValIrqMask &= ~IS_HW_ERR;
			}
		}
	}
#endif /* YUKON */

	if ((HwStatus & IS_RAM_RD_PAR) != 0) {

		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR);

		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG);
		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	if ((HwStatus & IS_RAM_WR_PAR) != 0) {

		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR);

		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG);
		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	if ((HwStatus & IS_M1_PAR_ERR) != 0) {
		SkMacParity(pAC, IoC, MAC_1);
	}

	if ((HwStatus & IS_M2_PAR_ERR) != 0) {
		SkMacParity(pAC, IoC, MAC_2);
	}

	if ((HwStatus & IS_R1_PAR_ERR) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P);

		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG);
		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);

		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if ((HwStatus & IS_R2_PAR_ERR) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P);

		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG);
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);

		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}
}	/* SkGeYuHwErr */

#ifdef YUK2
/******************************************************************************
 *
 *	SkYuk2HwPortErr() - Service HW Errors for specified port (Yukon-2 only)
 *
 * Description: handles the HW Error interrupts for a specific port.
 *
 * Returns: N/A
 */
static void SkYuk2HwPortErr(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
SK_U32	HwStatus,	/* Interrupt status word */
int		Port)		/* Port Index (MAC_1 + n) */
{
	SK_EVPARA	Para;
	int			Queue;

	if (Port == MAC_2) {
		HwStatus >>= 8;
	}

	if ((HwStatus & Y2_HWE_L1_MASK) == 0) {
		return;
	}

	if ((HwStatus & Y2_IS_PAR_RD1) != 0) {
		/* Clear IRQ */
		SK_OUT16(IoC, SELECT_RAM_BUFFER(Port, B3_RI_CTRL), RI_CLR_RD_PERR);

		if (Port == MAC_1) {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E028, SKERR_SIRQ_E028MSG);
		}
		else {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E030, SKERR_SIRQ_E030MSG);
		}
	}

	if ((HwStatus & Y2_IS_PAR_WR1) != 0) {
		/* Clear IRQ */
		SK_OUT16(IoC, SELECT_RAM_BUFFER(Port, B3_RI_CTRL), RI_CLR_WR_PERR);

		if (Port == MAC_1) {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E029, SKERR_SIRQ_E029MSG);
		}
		else {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E031, SKERR_SIRQ_E031MSG);
		}
	}

	if ((HwStatus & Y2_IS_PAR_MAC1) != 0) {
		/* Clear IRQ */
		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);

		if (Port == MAC_1) {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG);
		}
		else {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG);
		}
	}

	if ((HwStatus & Y2_IS_PAR_RX1) != 0) {
		if (Port == MAC_1) {
			Queue = Q_R1;
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG);
		}
		else {
			Queue = Q_R2;
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG);
		}
		/* Clear IRQ */
		SK_OUT32(IoC, Q_ADDR(Queue, Q_CSR), BMU_CLR_IRQ_PAR);
	}

	if ((HwStatus & Y2_IS_TCP_TXS1) != 0) {
		if (Port == MAC_1) {
			Queue = Q_XS1;
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E033, SKERR_SIRQ_E033MSG);
		}
		else {
			Queue = Q_XS2;
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E035, SKERR_SIRQ_E035MSG);
		}
		/* Clear IRQ */
		SK_OUT32(IoC, Q_ADDR(Queue, Q_CSR), BMU_CLR_IRQ_TCP);
	}

	if ((HwStatus & Y2_IS_TCP_TXA1) != 0) {
		if (Port == MAC_1) {
			Queue = Q_XA1;
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E032, SKERR_SIRQ_E032MSG);
		}
		else {
			Queue = Q_XA2;
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E034, SKERR_SIRQ_E034MSG);
		}
		/* Clear IRQ */
		SK_OUT32(IoC, Q_ADDR(Queue, Q_CSR), BMU_CLR_IRQ_TCP);
	}

	Para.Para64 = Port;
	SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);

	Para.Para32[0] = Port;
	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);

}	/* SkYuk2HwPortErr */

/******************************************************************************
 *
 *	SkYuk2HwErr() - Hardware Error service routine (Yukon-2 only)
 *
 * Description: handles all HW Error interrupts
 *
 * Returns: N/A
 */
static void SkYuk2HwErr(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
SK_U32	HwStatus)	/* Interrupt status word */
{
	SK_EVPARA	Para;
	SK_U16		Word;
	SK_U32		DWord;
	SK_U32		TlpHead[4];
	int			i;

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
		("HW-Error Status: 0x%08X\n", HwStatus));

	/* This is necessary only for Rx timing measurements */
	if ((HwStatus & Y2_IS_TIST_OV) != 0) {
		/* increment Time Stamp Timer counter (high) */
		pAC->GIni.GITimeStampCnt++;

		/* Clear Time Stamp Timer IRQ */
		SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ);
	}

	/* Evaluate Y2_IS_PCI_NEXP before Y2_IS_MST_ERR or Y2_IS_IRQ_STAT */
	if ((HwStatus & Y2_IS_PCI_NEXP) != 0) {
		/*
		 * This error is also mapped either to Master Abort (Y2_IS_MST_ERR)
		 * or Target Abort (Y2_IS_IRQ_STAT) bit and can only be cleared there.
		 * Therefore handle this event just by printing an error log entry.
		 */
		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E027, SKERR_SIRQ_E027MSG);
	}

	if ((HwStatus & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) != 0) {
		/* PCI Errors occured */
		if ((HwStatus & Y2_IS_IRQ_STAT) != 0) {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG);
		}
		else {
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG);
		}

		/* Reset all bits in the PCI STATUS register */
		SK_IN16(IoC, PCI_C(pAC, PCI_STATUS), &Word);

		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
		SK_OUT16(IoC, PCI_C(pAC, PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);

		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	/* check for PCI-Express Uncorrectable Error */
	if ((HwStatus & Y2_IS_PCI_EXP) != 0) {
		/*
		 * On PCI-Express bus bridges are called root complexes (RC).
		 * PCI-Express errors are recognized by the root complex too,
		 * which requests the system to handle the problem. After error
		 * occurence it may be that no access to the adapter may be performed
		 * any longer.
		 */

		/* Get uncorrectable error status */
		SK_IN32(IoC, PCI_C(pAC, PEX_UNC_ERR_STAT), &DWord);

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
			("PEX Uncorr.Error Status: 0x%08X\n", DWord));

		if (DWord != PEX_UNSUP_REQ) {
			/* ignore Unsupported Request Errors */
			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E026, SKERR_SIRQ_E026MSG);
		}

		if ((DWord & (PEX_FATAL_ERRORS | PEX_POIS_TLP)) != 0) {
			/*
			 * Stop only, if the uncorrectable error is fatal or
			 * Poisoned TLP occured
			 */
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Header Log:"));

			for (i = 0; i < 4; i++) {
				/* get TLP Header from Log Registers */
				SK_IN32(IoC, PCI_C(pAC, PEX_HEADER_LOG + i*4), &TlpHead[i]);

				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
					(" 0x%08X", TlpHead[i]));
			}
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("\n"));

			/* check for vendor defined broadcast message */
			if (TlpHead[0] == 0x73004001 && (SK_U8)TlpHead[1] == 0x7f) {

				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
					("Vendor defined broadcast message\n"));
			}
			else {
				Para.Para64 = 0;
				SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);

				pAC->GIni.GIValHwIrqMask &= ~Y2_IS_PCI_EXP;
				/* Rewrite HW IRQ mask */
				SK_OUT32(IoC, B0_HWE_IMSK, pAC->GIni.GIValHwIrqMask);
			}
		}

		/* clear any PEX errors */
		SK_OUT32(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
		SK_OUT32(IoC, PCI_C(pAC, PEX_UNC_ERR_STAT), 0xffffffffUL);
		SK_OUT32(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);

		SK_IN32(IoC, PCI_C(pAC, PEX_UNC_ERR_STAT), &DWord);

		if ((DWord & PEX_RX_OV) != 0) {
			/* Dev #4.205 occured */
			pAC->GIni.GIValHwIrqMask &= ~Y2_IS_PCI_EXP;
			pAC->GIni.GIValIrqMask &= ~Y2_IS_HW_ERR;
		}
	}

	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {

		SkYuk2HwPortErr(pAC, IoC, HwStatus, i);
	}

}	/* SkYuk2HwErr */
#endif /* YUK2 */

/******************************************************************************
 *
 *	SkGeSirqIsr() - Wrapper for Special Interrupt Service Routine
 *
 * Description: calls the preselected special ISR (slow path)
 *
 * Returns: N/A
 */
void SkGeSirqIsr(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O context */
SK_U32	Istatus)	/* Interrupt status word */
{
	pAC->GIni.GIFunc.pSkGeSirqIsr(pAC, IoC, Istatus);
}

/******************************************************************************
 *
 *	SkGeYuSirqIsr() - Special Interrupt Service Routine
 *
 * Description: handles all non data transfer specific interrupts (slow path)
 *
 * Returns: N/A
 */
void SkGeYuSirqIsr(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
SK_U32	Istatus)	/* Interrupt status word */
{
	SK_EVPARA	Para;
	SK_U32		RegVal32;	/* Read register value */
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_U16		PhyInt;
	int			i;

	if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) {
		/* read the HW Error Interrupt source */
		SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);

		SkGeYuHwErr(pAC, IoC, RegVal32);
	}

	/*
	 * Packet Timeout interrupts
	 */
	/* Check whether MACs are correctly initialized */
	if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) &&
		pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) {
		/* MAC 1 was not initialized but Packet timeout occured */
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
			SKERR_SIRQ_E004MSG);
	}

	if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) &&
		pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) {
		/* MAC 2 was not initialized but Packet timeout occured */
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
			SKERR_SIRQ_E005MSG);
	}

	if ((Istatus & IS_PA_TO_RX1) != 0) {
		/* Means network is filling us up */
		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002,
			SKERR_SIRQ_E002MSG);
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1);
	}

	if ((Istatus & IS_PA_TO_RX2) != 0) {
		/* Means network is filling us up */
		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003,
			SKERR_SIRQ_E003MSG);
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2);
	}

	if ((Istatus & IS_PA_TO_TX1) != 0) {

		pPrt = &pAC->GIni.GP[MAC_1];

		/* May be a normal situation in a server with a slow network */
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1);

#ifdef GENESIS
		if (pAC->GIni.GIGenesis) {
			/*
			 * workaround: if in half duplex mode, check for Tx hangup.
			 * Read number of TX'ed bytes, wait for 10 ms, then compare
			 * the number with current value. If nothing changed, we assume
			 * that Tx is hanging and do a FIFO flush (see event routine).
			 */
			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
				!pPrt->HalfDupTimerActive) {
				/*
				 * many more pack. arb. timeouts may come in between,
				 * we ignore those
				 */
				pPrt->HalfDupTimerActive = SK_TRUE;

				/* Snap statistic counters */
				(void)SkXmUpdateStats(pAC, IoC, 0);

				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32);

				pPrt->LastOctets = (SK_U64)RegVal32 << 32;

				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32);

				pPrt->LastOctets += RegVal32;

				Para.Para32[0] = 0;
				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
			}
		}
#endif /* GENESIS */
	}

	if ((Istatus & IS_PA_TO_TX2) != 0) {

		pPrt = &pAC->GIni.GP[MAC_2];

		/* May be a normal situation in a server with a slow network */
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2);

#ifdef GENESIS
		if (pAC->GIni.GIGenesis) {
			/* workaround: see above */
			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
				 pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
				!pPrt->HalfDupTimerActive) {
				pPrt->HalfDupTimerActive = SK_TRUE;

				/* Snap statistic counters */
				(void)SkXmUpdateStats(pAC, IoC, 1);

				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32);

				pPrt->LastOctets = (SK_U64)RegVal32 << 32;

				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32);

				pPrt->LastOctets += RegVal32;

				Para.Para32[0] = 1;
				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
			}
		}
#endif /* GENESIS */
	}

	/* Check interrupts of the particular queues */
	if ((Istatus & IS_R1_C) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C);

		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006,
			SKERR_SIRQ_E006MSG);
		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if ((Istatus & IS_R2_C) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C);

		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007,
			SKERR_SIRQ_E007MSG);
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if ((Istatus & IS_XS1_C) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C);

		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008,
			SKERR_SIRQ_E008MSG);
		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if ((Istatus & IS_XA1_C) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C);

		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009,
			SKERR_SIRQ_E009MSG);

		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if ((Istatus & IS_XS2_C) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C);

		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010,
			SKERR_SIRQ_E010MSG);
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if ((Istatus & IS_XA2_C) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C);

		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011,
			SKERR_SIRQ_E011MSG);
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	/* External reg interrupt */
	if ((Istatus & IS_EXT_REG) != 0) {
		/* Test IRQs from PHY */
		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {

			pPrt = &pAC->GIni.GP[i];

			if (pPrt->PState == SK_PRT_RESET) {
				continue;
			}

#ifdef GENESIS
			if (pAC->GIni.GIGenesis) {

				switch (pPrt->PhyType) {

				case SK_PHY_XMAC:
					break;

				case SK_PHY_BCOM:
					SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt);

					if ((PhyInt & ~PHY_B_DEF_MSK) != 0) {
						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
							("Port %d PHY Int: 0x%04X\n", i, PhyInt));
						SkPhyIsrBcom(pAC, IoC, i, PhyInt);
					}
					break;
#ifdef OTHER_PHY
				case SK_PHY_LONE:
					SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt);

					if ((PhyInt & PHY_L_DEF_MSK) != 0) {
						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
							("Port %d PHY Int: 0x%04X\n", i, PhyInt));
						SkPhyIsrLone(pAC, IoC, i, PhyInt);
					}
					break;
#endif /* OTHER_PHY */
				}
			}
#endif /* GENESIS */

#ifdef YUKON
			if (pAC->GIni.GIYukon) {
				/* Read PHY Interrupt Status */
				SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt);

				if ((PhyInt & PHY_M_DEF_MSK) != 0) {
					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
						("Port %d PHY Int: 0x%04X\n", i, PhyInt));
					SkPhyIsrGmac(pAC, IoC, i, PhyInt);
				}
			}
#endif /* YUKON */
		}
	}

	/* TWSI Ready interrupt */
	if ((Istatus & IS_I2C_READY) != 0) {
#ifdef SK_SLIM
		SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
#else
		SkI2cIsr(pAC, IoC);
#endif
	}

	/* SW forced interrupt */
	if ((Istatus & IS_IRQ_SW) != 0) {
		/* clear the software IRQ */
		SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ);
	}

	if ((Istatus & IS_LNK_SYNC_M1) != 0) {
		/*
		 * We do NOT need the Link Sync interrupt, because it shows
		 * us only a link going down.
		 */
		/* clear interrupt */
		SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LNK_CLR_IRQ);
	}

	/* Check MAC after link sync counter */
	if ((Istatus & IS_MAC1) != 0) {
		/* IRQ from MAC 1 */
		SkMacIrq(pAC, IoC, MAC_1);
	}

	if ((Istatus & IS_LNK_SYNC_M2) != 0) {
		/*
		 * We do NOT need the Link Sync interrupt, because it shows
		 * us only a link going down.
		 */
		/* clear interrupt */
		SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LNK_CLR_IRQ);
	}

	/* Check MAC after link sync counter */
	if ((Istatus & IS_MAC2) != 0) {
		/* IRQ from MAC 2 */
		SkMacIrq(pAC, IoC, MAC_2);
	}

	/* Timer interrupt (served last) */
	if ((Istatus & IS_TIMINT) != 0) {
		/* check for HW Errors */
		if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) {
			/* read the HW Error Interrupt source */
			SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);

			SkGeYuHwErr(pAC, IoC, RegVal32);
		}

		SkHwtIsr(pAC, IoC);
	}

}	/* SkGeYuSirqIsr */

#ifdef YUK2
/******************************************************************************
 *
 *	SkYuk2PortSirq() - Service HW Errors for specified port (Yukon-2 only)
 *
 * Description: handles the HW Error interrupts for a specific port.
 *
 * Returns: N/A
 */
static void SkYuk2PortSirq(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
SK_U32	IStatus,	/* Interrupt status word */
int		Port)		/* Port Index (MAC_1 + n) */
{
	SK_EVPARA	Para;
	int			Queue;
	SK_U16		PhyInt;

	if (Port == MAC_2) {
		IStatus >>= 8;
	}

	/* Interrupt from PHY */
	if ((IStatus & Y2_IS_IRQ_PHY1) != 0) {
		/* Read PHY Interrupt Status */
		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyInt);

		if ((PhyInt & PHY_M_DEF_MSK) != 0) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
				("Port %d PHY Int: 0x%04X\n", Port, PhyInt));
			SkPhyIsrGmac(pAC, IoC, Port, PhyInt);
		}
	}

	/* Interrupt from MAC */
	if ((IStatus & Y2_IS_IRQ_MAC1) != 0) {
		SkMacIrq(pAC, IoC, Port);
	}

	if ((IStatus & (Y2_IS_CHK_RX1 | Y2_IS_CHK_TXS1 | Y2_IS_CHK_TXA1)) != 0) {
		if ((IStatus & Y2_IS_CHK_RX1) != 0) {
			if (Port == MAC_1) {
				Queue = Q_R1;
				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E006,
					SKERR_SIRQ_E006MSG);
			}
			else {
				Queue = Q_R2;
				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E007,
					SKERR_SIRQ_E007MSG);
			}
			/* Clear IRQ */
			SK_OUT32(IoC, Q_ADDR(Queue, Q_CSR), BMU_CLR_IRQ_CHK);
		}

		if ((IStatus & Y2_IS_CHK_TXS1) != 0) {
			if (Port == MAC_1) {
				Queue = Q_XS1;
				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E008,
					SKERR_SIRQ_E008MSG);
			}
			else {
				Queue = Q_XS2;
				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E010,
					SKERR_SIRQ_E010MSG);
			}
			/* Clear IRQ */
			SK_OUT32(IoC, Q_ADDR(Queue, Q_CSR), BMU_CLR_IRQ_CHK);
		}

		if ((IStatus & Y2_IS_CHK_TXA1) != 0) {
			if (Port == MAC_1) {
				Queue = Q_XA1;

				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E009,
					SKERR_SIRQ_E009MSG);

			}
			else {
				Queue = Q_XA2;
				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E011,
					SKERR_SIRQ_E011MSG);
			}
			/* Clear IRQ */
			SK_OUT32(IoC, Q_ADDR(Queue, Q_CSR), BMU_CLR_IRQ_CHK);
		}

		Para.Para64 = Port;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);

		Para.Para32[0] = Port;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}
}	/* SkYuk2PortSirq */
#endif /* YUK2 */

/******************************************************************************
 *
 *	SkYuk2SirqIsr() - Special Interrupt Service Routine	(Yukon-2 only)
 *
 * Description: handles all non data transfer specific interrupts (slow path)
 *
 * Returns: N/A
 */
void SkYuk2SirqIsr(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
SK_U32	Istatus)	/* Interrupt status word */
{
#ifdef YUK2
	SK_EVPARA	Para;
	SK_U32		RegVal32;	/* Read register value */
	SK_U8		Value;

	/* HW Error indicated ? */
	if (((Istatus & Y2_IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) {
		/* read the HW Error Interrupt source */
		SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);

		SkYuk2HwErr(pAC, IoC, RegVal32);
	}

	/* Interrupt from ASF Subsystem */
	if ((Istatus & Y2_IS_ASF) != 0) {
		/* clear IRQ */
		/* later on clearing should be done in ASF ISR handler */
		SK_IN8(IoC, B28_Y2_ASF_STAT_CMD, &Value);
		Value |= Y2_ASF_CLR_HSTI;
		SK_OUT8(IoC, B28_Y2_ASF_STAT_CMD, Value);
		/* Call IRQ handler in ASF Module */
		/* TBD */
	}

	/* Check IRQ from polling unit */
	if ((Istatus & Y2_IS_POLL_CHK) != 0) {
		/* Clear IRQ */
		SK_OUT32(IoC, POLL_CTRL, PC_CLR_IRQ_CHK);

		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E036,
			SKERR_SIRQ_E036MSG);
		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	/* TWSI Ready interrupt */
	if ((Istatus & Y2_IS_TWSI_RDY) != 0) {
#ifdef SK_SLIM
		SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
#else
		SkI2cIsr(pAC, IoC);
#endif
	}

	/* SW forced interrupt */
	if ((Istatus & Y2_IS_IRQ_SW) != 0) {
		/* clear the software IRQ */
		SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ);
	}

	if ((Istatus & Y2_IS_L1_MASK) != 0) {
		SkYuk2PortSirq(pAC, IoC, Istatus, MAC_1);
	}

	if ((Istatus & Y2_IS_L2_MASK) != 0) {
		SkYuk2PortSirq(pAC, IoC, Istatus, MAC_2);
	}

	/* Timer interrupt (served last) */
	if ((Istatus & Y2_IS_TIMINT) != 0) {

		if (((Istatus & Y2_IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) {
			/* read the HW Error Interrupt source */
			SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);

			/* otherwise we would generate error log entries periodically */
			RegVal32 &= pAC->GIni.GIValHwIrqMask;
			if (RegVal32 != 0) {
				SkYuk2HwErr(pAC, IoC, RegVal32);
			}
		}

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
			("Timer Int: 0x%08X\n", Istatus));
		SkHwtIsr(pAC, IoC);
	}
#endif /* YUK2 */

}	/* SkYuk2SirqIsr */


#ifdef GENESIS
/******************************************************************************
 *
 * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 */
static int SkGePortCheckShorts(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port)		/* Port Index (MAC_1 + n) */
{
	SK_U32		Shorts;			/* Short Event Counter */
	SK_U32		CheckShorts;	/* Check value for Short Event Counter */
	SK_U64		RxCts;			/* Rx Counter (packets on network) */
	SK_U32		RxTmp;			/* Rx temp. Counter */
	SK_U32		FcsErrCts;		/* FCS Error Counter */
	SK_GEPORT	*pPrt;			/* GIni Port struct pointer */
	int			Rtv;			/* Return value */
	int			i;

	pPrt = &pAC->GIni.GP[Port];

	/* Default: no action */
	Rtv = SK_HW_PS_NONE;

	(void)SkXmUpdateStats(pAC, IoC, Port);

	/* Extra precaution: check for short Event counter */
	(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);

	/*
	 * Read Rx counters (packets seen on the network and not necessarily
	 * really received.
	 */
	RxCts = 0;

	for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) {

		(void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp);

		RxCts += (SK_U64)RxTmp;
	}

	/* On default: check shorts against zero */
	CheckShorts = 0;

	/* Extra precaution on active links */
	if (pPrt->PHWLinkUp) {
		/* Reset Link Restart counter */
		pPrt->PLinkResCt = 0;
		pPrt->PAutoNegTOCt = 0;

		/* If link is up check for 2 */
		CheckShorts = 2;

		(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts);

		if (pPrt->PLinkModeConf == (SK_U8)SK_LMODE_AUTOSENSE &&
			pPrt->PLipaAutoNeg == (SK_U8)SK_LIPA_UNKNOWN &&
			(pPrt->PLinkMode == (SK_U8)SK_LMODE_HALF ||
			 pPrt->PLinkMode == (SK_U8)SK_LMODE_FULL)) {
			/*
			 * This is autosensing and we are in the fallback
			 * manual full/half duplex mode.
			 */
			if (RxCts == pPrt->PPrevRx) {
				/* Nothing received, restart link */
				pPrt->PPrevFcs = FcsErrCts;
				pPrt->PPrevShorts = Shorts;

				return(SK_HW_PS_RESTART);
			}
			else {
				pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_MANUAL;
			}
		}

		if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) ||
			(!(FcsErrCts - pPrt->PPrevFcs))) {
			/*
			 * Note: The compare with zero above has to be done the way shown,
			 * otherwise the Linux driver will have a problem.
			 */
			/*
			 * We received a bunch of frames or no CRC error occured on the
			 * network -> ok.
			 */
			pPrt->PPrevRx = RxCts;
			pPrt->PPrevFcs = FcsErrCts;
			pPrt->PPrevShorts = Shorts;

			return(SK_HW_PS_NONE);
		}

		pPrt->PPrevFcs = FcsErrCts;
	}


	if ((Shorts - pPrt->PPrevShorts) > CheckShorts) {
		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
			("Short Event Count Restart Port %d \n", Port));
		Rtv = SK_HW_PS_RESTART;
	}

	pPrt->PPrevShorts = Shorts;
	pPrt->PPrevRx = RxCts;

	return(Rtv);
}	/* SkGePortCheckShorts */
#endif /* GENESIS */


/******************************************************************************
 *
 * SkGePortCheckUp() - Check if the link is up
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int SkGePortCheckUp(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port)		/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
	int			Rtv;		/* Return value */

	Rtv = SK_HW_PS_NONE;

	pPrt = &pAC->GIni.GP[Port];

	AutoNeg = pPrt->PLinkMode != SK_LMODE_HALF &&
			  pPrt->PLinkMode != SK_LMODE_FULL;

#ifdef GENESIS
	if (pAC->GIni.GIGenesis) {

		switch (pPrt->PhyType) {

		case SK_PHY_XMAC:
			Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg);
			break;
		case SK_PHY_BCOM:
			Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg);
			break;
#ifdef OTHER_PHY
		case SK_PHY_LONE:
			Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg);
			break;
		case SK_PHY_NAT:
			Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg);
			break;
#endif /* OTHER_PHY */
		}
	}
#endif /* GENESIS */

#ifdef YUKON
	if (pAC->GIni.GIYukon) {

		Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg);
	}
#endif /* YUKON */

	return(Rtv);
}	/* SkGePortCheckUp */


#ifdef GENESIS
/******************************************************************************
 *
 * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int SkGePortCheckUpXmac(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port,		/* Port Index (MAC_1 + n) */
SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
{
	SK_U32		Shorts;		/* Short Event Counter */
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	int			Done;
	SK_U32		GpReg;		/* General Purpose register value */
	SK_U16		Isrc;		/* Interrupt source register */
	SK_U16		IsrcSum;	/* Interrupt source register sum */
	SK_U16		LpAb;		/* Link Partner Ability */
	SK_U16		ResAb;		/* Resolved Ability */
	SK_U16		ExtStat;	/* Extended Status Register */
	SK_U8		NextMode;	/* Next AutoSensing Mode */

	pPrt = &pAC->GIni.GP[Port];

	if (pPrt->PHWLinkUp) {
		if (pPrt->PhyType != SK_PHY_XMAC) {
			return(SK_HW_PS_NONE);
		}
		else {
			return(SkGePortCheckShorts(pAC, IoC, Port));
		}
	}

	IsrcSum = pPrt->PIsave;
	pPrt->PIsave = 0;

	/* Now wait for each port's link */
	if (pPrt->PLinkBroken) {
		/* Link was broken */
		XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);

		if ((GpReg & XM_GP_INP_ASS) == 0) {
			/* The Link is in sync */
			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
			IsrcSum |= Isrc;
			SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);

			if ((Isrc & XM_IS_INP_ASS) == 0) {
				/* It has been in sync since last time */
				/* Restart the PORT */
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
					("Link in sync Restart Port %d\n", Port));

				(void)SkXmUpdateStats(pAC, IoC, Port);

				/* We now need to reinitialize the PrevShorts counter */
				(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
				pPrt->PPrevShorts = Shorts;

				pPrt->PLinkBroken = SK_FALSE;

				/*
				 * Link Restart Workaround:
				 *  it may be possible that the other Link side
				 *  restarts its link as well an we detect
				 *  another PLinkBroken. To prevent this
				 *  happening we check for a maximum number
				 *  of consecutive restart. If those happens,
				 *  we do NOT restart the active link and
				 *  check whether the link is now o.k.
				 */
				pPrt->PLinkResCt++;

				pPrt->PAutoNegTimeOut = 0;

				if (pPrt->PLinkResCt < SK_MAX_LRESTART) {
					return(SK_HW_PS_RESTART);
				}

				pPrt->PLinkResCt = 0;

				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
					("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum));
			}
			else {
				pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);

				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
					("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum));

				/* Do nothing more if link is broken */
				return(SK_HW_PS_NONE);
			}
		}
		else {
			/* Do nothing more if link is broken */
			return(SK_HW_PS_NONE);
		}

	}
	else {
		/* Link was not broken, check if it is */
		XM_IN16(IoC, Port, XM_ISRC, &Isrc);
		IsrcSum |= Isrc;
		if ((Isrc & XM_IS_INP_ASS) != 0) {
			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
			IsrcSum |= Isrc;
			if ((Isrc & XM_IS_INP_ASS) != 0) {
				XM_IN16(IoC, Port, XM_ISRC, &Isrc);
				IsrcSum |= Isrc;
				if ((Isrc & XM_IS_INP_ASS) != 0) {
					pPrt->PLinkBroken = SK_TRUE;
					/* Re-Init Link partner Autoneg flag */
					pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN;
					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
						("Link broken Port %d\n", Port));

					/* Cable removed-> reinit sense mode */
					SkHWInitDefSense(pAC, IoC, Port);

					return(SK_HW_PS_RESTART);
				}
			}
		}
		else {
			SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc);

			if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) {
				return(SK_HW_PS_RESTART);
			}
		}
	}

	/*
	 * here we usually can check whether the link is in sync and
	 * auto-negotiation is done.
	 */
	XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
	XM_IN16(IoC, Port, XM_ISRC, &Isrc);
	IsrcSum |= Isrc;

	SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);

	if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) {
		if ((GpReg & XM_GP_INP_ASS) == 0) {
			/* Save Auto-negotiation Done interrupt only if link is in sync */
			pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
		}
#ifdef DEBUG
		if ((pPrt->PIsave & XM_IS_AND) != 0) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
				("AutoNeg done rescheduled Port %d\n", Port));
		}
#endif /* DEBUG */
		return(SK_HW_PS_NONE);
	}

	if (AutoNeg) {
		/* Auto-Negotiation Done ? */
		if ((IsrcSum & XM_IS_AND) != 0) {

			SkHWLinkUp(pAC, IoC, Port);

			Done = SkMacAutoNegDone(pAC, IoC, Port);

			if (Done != SK_AND_OK) {
				/* Get PHY parameters, for debugging only */
				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb);
				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
					("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n",
					Port, LpAb, ResAb));

				/* Try next possible mode */
				NextMode = SkHWSenseGetNext(pAC, IoC, Port);

				SkHWLinkDown(pAC, IoC, Port);

				if (Done == SK_AND_DUP_CAP) {
					/* GoTo next mode */
					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
				}

				return(SK_HW_PS_RESTART);
			}
			/*
			 * Dummy Read extended status to prevent extra link down/ups
			 * (clear Page Received bit if set)
			 */
			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat);

			return(SK_HW_PS_LINK);
		}

		/* AutoNeg not done, but HW link is up. Check for timeouts */
		if (pPrt->PAutoNegTimeOut++ >= SK_AND_MAX_TO) {
			/* Increase the Timeout counter */
			pPrt->PAutoNegTOCt++;

			/* Timeout occured */
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
				("AutoNeg timeout Port %d\n", Port));
			if (pPrt->PLinkModeConf == (SK_U8)SK_LMODE_AUTOSENSE &&
				pPrt->PLipaAutoNeg != (SK_U8)SK_LIPA_AUTO) {
				/* Set Link manually up */
				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
					("Set manual full duplex Port %d\n", Port));
			}

			if (pPrt->PLinkModeConf == (SK_U8)SK_LMODE_AUTOSENSE &&
				pPrt->PLipaAutoNeg == (SK_U8)SK_LIPA_AUTO &&
				pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) {
				/*
				 * This is rather complicated.
				 * we need to check here whether the LIPA_AUTO
				 * we saw before is false alert. We saw at one
				 * switch (SR8800) that on boot time it sends
				 * just one auto-neg packet and does no further
				 * auto-negotiation.
				 * Solution: we restart the autosensing after
				 * a few timeouts.
				 */
				pPrt->PAutoNegTOCt = 0;
				pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN;
				SkHWInitDefSense(pAC, IoC, Port);
			}

			/* Do the restart */
			return(SK_HW_PS_RESTART);
		}
	}
	else {
		/* Link is up and we don't need more */
#ifdef DEBUG
		if (pPrt->PLipaAutoNeg == (SK_U8)SK_LIPA_AUTO) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
				("ERROR: Lipa auto detected on port %d\n", Port));
		}
#endif /* DEBUG */
		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
			("Link sync(GP), Port %d\n", Port));
		SkHWLinkUp(pAC, IoC, Port);

		/*
		 * Link sync (GP) and so assume a good connection. But if no
		 * bunch of frames received in a time slot (maybe broken Tx cable)
		 * the port is restart.
		 */
		return(SK_HW_PS_LINK);
	}

	return(SK_HW_PS_NONE);
}	/* SkGePortCheckUpXmac */


/******************************************************************************
 *
 * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int SkGePortCheckUpBcom(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port,		/* Port Index (MAC_1 + n) */
SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	int			Done;
	SK_U16		Isrc;		/* Interrupt source register */
	SK_U16		PhyStat;	/* PHY Status Register */
	SK_U16		ResAb;		/* Master/Slave resolution */
	SK_U16		Ctrl;		/* Broadcom control flags */
#ifdef DEBUG
	SK_U16		LpAb;
	SK_U16		ExtStat;
#endif /* DEBUG */

	pPrt = &pAC->GIni.GP[Port];

	/* Check for No HCD Link events (#10523) */
	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc);

	if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) {
		/*
		 * Workaround BCom Errata:
		 *	enable and disable loopback mode if "NO HCD" occurs.
		 */
		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl);
		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
			(SK_U16)(Ctrl | PHY_CT_LOOP));
		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
			(SK_U16)(Ctrl & ~PHY_CT_LOOP));
		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
			("No HCD Link event, Port %d\n", Port));
	}

	/* Not obsolete: link status bit is latched to 0 and autoclearing! */
	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);

	if (pPrt->PHWLinkUp) {
		return(SK_HW_PS_NONE);
	}

	/*
	 * Here we usually can check whether the link is in sync and
	 * auto-negotiation is done.
	 */

	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);

	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));

	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);

	if ((ResAb & PHY_B_1000S_MSF) != 0) {
		/* Error */
		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
			("Master/Slave Fault, ResAb: 0x%04X\n", ResAb));

		pPrt->PAutoNegFail = SK_TRUE;
		pPrt->PMSStatus = SK_MS_STAT_FAULT;

		return(SK_HW_PS_RESTART);
	}

	if ((PhyStat & PHY_ST_LSYNC) == 0) {
		return(SK_HW_PS_NONE);
	}

	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("Port %d, ResAb: 0x%04X\n", Port, ResAb));

	if (AutoNeg) {
		/* Auto-Negotiation Over ? */
		if ((PhyStat & PHY_ST_AN_OVER) != 0) {

			SkHWLinkUp(pAC, IoC, Port);

			Done = SkMacAutoNegDone(pAC, IoC, Port);

			if (Done != SK_AND_OK) {
#ifdef DEBUG
				/* Get PHY parameters, for debugging only */
				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb);
				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat);
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
					Port, LpAb, ExtStat));
#endif /* DEBUG */
				return(SK_HW_PS_RESTART);
			}
			else {
				return(SK_HW_PS_LINK);
			}
		}
	}
	else {	/* !AutoNeg */
		/* Link is up and we don't need more */
#ifdef DEBUG
		if (pPrt->PLipaAutoNeg == (SK_U8)SK_LIPA_AUTO) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
				("ERROR: Lipa auto detected on port %d\n", Port));
		}
#endif /* DEBUG */

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
			("Link sync(GP), Port %d\n", Port));
		SkHWLinkUp(pAC, IoC, Port);

		return(SK_HW_PS_LINK);
	}

	return(SK_HW_PS_NONE);
}	/* SkGePortCheckUpBcom */
#endif /* GENESIS */


#ifdef YUKON
/******************************************************************************
 *
 * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int SkGePortCheckUpGmac(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port,		/* Port Index (MAC_1 + n) */
SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	int			Done;
	SK_U16		PhyStat;	/* PHY Status */
	SK_U16		PhySpecStat;/* PHY Specific Status */
	SK_U16		ResAb;		/* Master/Slave resolution */
#ifndef SK_SLIM
	SK_EVPARA	Para;
#endif /* !SK_SLIM */
#ifdef DEBUG
	SK_U16		Word;		/* I/O helper */
#endif /* DEBUG */

	pPrt = &pAC->GIni.GP[Port];

	if (pPrt->PHWLinkUp) {
		return(SK_HW_PS_NONE);
	}

	/* Read PHY Status */
	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));

	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);

	if ((pPrt->PLinkSpeedCap & SK_LSPEED_CAP_1000MBPS) != 0) {

		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);

		if ((ResAb & PHY_B_1000S_MSF) != 0) {
			/* Error */
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
				("Master/Slave Fault, ResAb: 0x%04X\n", ResAb));

			pPrt->PAutoNegFail = SK_TRUE;
			pPrt->PMSStatus = SK_MS_STAT_FAULT;

			return(SK_HW_PS_RESTART);
		}
	}

	/* Read PHY Specific Status */
	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat));

#if (defined(DEBUG) && !defined(SK_SLIM))
	/* Read PHY Auto-Negotiation Expansion */
	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word);

	if (pAC->GIni.GICopperType && (Word & PHY_ANE_LP_CAP) == 0) {

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
			("Link Partner not Auto-Neg. able, AN Exp.: 0x%04X\n", Word));
	}

	if ((Word & PHY_ANE_RX_PG) != 0 ||
		(PhySpecStat & PHY_M_PS_PAGE_REC) != 0) {
		/* Read PHY Next Page Link Partner */
		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word);

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
			("Page received, NextPage: 0x%04X\n", Word));
	}
#endif /* DEBUG && !SK_SLIM */

	if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) {
		/* Link down */
		return(SK_HW_PS_NONE);
	}

#ifdef XXX
	SK_U16		PhyInt;
	/* Read PHY Interrupt Status */
	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyInt);

	/* cross check that the link is really up */
	if ((PhyInt & PHY_M_IS_LST_CHANGE) == 0) {
		/* Link Status unchanged */
		return(SK_HW_PS_NONE);
	}
#endif /* XXX */

#ifndef SK_SLIM
	if (pAC->GIni.GICopperType) {

		if ((pPrt->PLinkSpeedCap & SK_LSPEED_CAP_1000MBPS) != 0) {

			if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0) {
				/* Downshift detected */
				Para.Para64 = Port;
				SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para);

				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
					("Downshift detected, PhySpecStat: 0x%04X\n", PhySpecStat));

				SK_ERR_LOG(pAC, SK_ERRCL_CONFIG, SKERR_SIRQ_E025,
					SKERR_SIRQ_E025MSG);
			}

			pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
				SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
		}

		if ((PhySpecStat & PHY_M_PS_MDI_X_STAT) != 0) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
				("MDI Xover detected, PhyStat: 0x%04X\n", PhySpecStat));
		}

		/* on PHY 88E1112 & 88E1145 cable length is in Reg. 26, Page 5 */
		if (pAC->GIni.GIChipId == CHIP_ID_YUKON_XL ||
			pAC->GIni.GIChipId == CHIP_ID_YUKON_EC_U) {
			/* select page 5 to access VCT DSP distance register */
			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 5);

			/* get VCT DSP distance */
			SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL_2, &PhySpecStat);

			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0);

			pPrt->PCableLen = (SK_U8)(PhySpecStat & PHY_M_EC2_FO_AM_MSK);
		}
		else {
			pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7);
		}
	}
#endif /* !SK_SLIM */

	if (AutoNeg) {
		/* Auto-Negotiation Complete ? */
		if ((PhyStat & PHY_ST_AN_OVER) != 0) {

			SkHWLinkUp(pAC, IoC, Port);

			Done = SkMacAutoNegDone(pAC, IoC, Port);

			if (Done != SK_AND_OK) {
				return(SK_HW_PS_RESTART);
			}

			return(SK_HW_PS_LINK);
		}
	}
	else {	/* !AutoNeg */
#if (defined(DEBUG) && !defined(SK_SLIM))
		if (pPrt->PLipaAutoNeg == (SK_U8)SK_LIPA_AUTO) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
				("ERROR: Lipa auto detected on port %d\n", Port));
		}
#endif /* DEBUG && !SK_SLIM */

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
			("Link sync, Port %d\n", Port));
		SkHWLinkUp(pAC, IoC, Port);

		return(SK_HW_PS_LINK);
	}

	return(SK_HW_PS_NONE);
}	/* SkGePortCheckUpGmac */

#endif /* YUKON */


#ifdef OTHER_PHY
/******************************************************************************
 *
 * SkGePortCheckUpLone() - Check if the link is up on Level One PHY
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int SkGePortCheckUpLone(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port,		/* Port Index (MAC_1 + n) */
SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	int			Done;
	SK_U16		Isrc;		/* Interrupt source register */
	SK_U16		LpAb;		/* Link Partner Ability */
	SK_U16		ExtStat;	/* Extended Status Register */
	SK_U16		PhyStat;	/* PHY Status Register */
	SK_U16		StatSum;
	SK_U8		NextMode;	/* Next AutoSensing Mode */

	pPrt = &pAC->GIni.GP[Port];

	if (pPrt->PHWLinkUp) {
		return(SK_HW_PS_NONE);
	}

	StatSum = pPrt->PIsave;
	pPrt->PIsave = 0;

	/*
	 * here we usually can check whether the link is in sync and
	 * auto-negotiation is done.
	 */
	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat);
	StatSum |= PhyStat;

	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);

	if ((PhyStat & PHY_ST_LSYNC) == 0) {
		/* Save Auto-negotiation Done bit */
		pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER);
#ifdef DEBUG
		if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
				("AutoNeg done rescheduled Port %d\n", Port));
		}
#endif /* DEBUG */
		return(SK_HW_PS_NONE);
	}

	if (AutoNeg) {
		/* Auto-Negotiation Over ? */
		if ((StatSum & PHY_ST_AN_OVER) != 0) {

			SkHWLinkUp(pAC, IoC, Port);

			Done = SkMacAutoNegDone(pAC, IoC, Port);

			if (Done != SK_AND_OK) {
				/* Get PHY parameters, for debugging only */
				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb);
				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat);
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
					 Port, LpAb, ExtStat));

				/* Try next possible mode */
				NextMode = SkHWSenseGetNext(pAC, IoC, Port);

				SkHWLinkDown(pAC, IoC, Port);

				if (Done == SK_AND_DUP_CAP) {
					/* GoTo next mode */
					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
				}

				return(SK_HW_PS_RESTART);

			}
			else {
				/*
				 * Dummy Read interrupt status to prevent
				 * extra link down/ups
				 */
				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
				return(SK_HW_PS_LINK);
			}
		}

		/* AutoNeg not done, but HW link is up. Check for timeouts */
		if (pPrt->PAutoNegTimeOut++ >= SK_AND_MAX_TO) {
			/* Timeout occured */
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
				("AutoNeg timeout Port %d\n", Port));
			if (pPrt->PLinkModeConf == (SK_U8)SK_LMODE_AUTOSENSE &&
				pPrt->PLipaAutoNeg != (SK_U8)SK_LIPA_AUTO) {
				/* Set Link manually up */
				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
					("Set manual full duplex Port %d\n", Port));
			}

			/* Do the restart */
			return(SK_HW_PS_RESTART);
		}
	}
	else {
		/* Link is up and we don't need more */
#ifdef DEBUG
		if (pPrt->PLipaAutoNeg == (SK_U8)SK_LIPA_AUTO) {
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_ERR,
				("ERROR: Lipa auto detected on port %d\n", Port));
		}
#endif /* DEBUG */

		/*
		 * Dummy Read interrupt status to prevent
		 * extra link down/ups
		 */
		SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
			("Link sync(GP), Port %d\n", Port));

		SkHWLinkUp(pAC, IoC, Port);

		return(SK_HW_PS_LINK);
	}

	return(SK_HW_PS_NONE);
}	/* SkGePortCheckUpLone */


/******************************************************************************
 *
 * SkGePortCheckUpNat() - Check if the link is up on National PHY
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int SkGePortCheckUpNat(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port,		/* Port Index (MAC_1 + n) */
SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
{
	/* todo: National */
	return(SK_HW_PS_NONE);
}	/* SkGePortCheckUpNat */
#endif /* OTHER_PHY */


/******************************************************************************
 *
 *	SkGeSirqEvent() - Event Service Routine
 *
 * Description:
 *
 * Notes:
 */
int	SkGeSirqEvent(
SK_AC		*pAC,		/* Adapter Context */
SK_IOC		IoC,		/* I/O Context */
SK_U32		Event,		/* Module specific Event */
SK_EVPARA	Para)		/* Event specific Parameter */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	int			Port;
	SK_U32		Val32;
	int			PortStat;
#ifndef SK_SLIM
	SK_U8		Val8;
#endif
#ifdef GENESIS
	SK_U64		Octets;
#endif /* GENESIS */

	Port = (int)Para.Para32[0];
	pPrt = &pAC->GIni.GP[Port];

	switch (Event) {
	case SK_HWEV_WATIM:
		if (pPrt->PState == SK_PRT_RESET) {

			PortStat = SK_HW_PS_NONE;
		}
		else {
			/* Check whether port came up */
			PortStat = SkGePortCheckUp(pAC, IoC, Port);
		}

		switch (PortStat) {
		case SK_HW_PS_RESTART:
			if (pPrt->PHWLinkUp) {
				/* Set Link to down */
				SkHWLinkDown(pAC, IoC, Port);

				/*
				 * Signal directly to RLMT to ensure correct
				 * sequence of SWITCH and RESET event.
				 */
				SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
			}

			/* Restart needed */
			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
			break;

		case SK_HW_PS_LINK:
			/* Signal to RLMT */
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para);
			break;
		}

		/* Start again the check Timer */
		if (pPrt->PHWLinkUp) {

			Val32 = SK_WA_ACT_TIME;
		}
		else {
			Val32 = SK_WA_INA_TIME;

			if (pAC->GIni.GIYukon) {
				Val32 *= 5;
			}
		}
		/* Start workaround Errata #2 timer */
		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32,
			SKGE_HWAC, SK_HWEV_WATIM, Para);

		break;

	case SK_HWEV_PORT_START:

#ifndef SK_SLIM
		if (pPrt->PHWLinkUp) {
			/*
			 * Signal directly to RLMT to ensure correct
			 * sequence of SWITCH and RESET event.
			 */
			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
		}
#endif /* !SK_SLIM */

		SkHWLinkDown(pAC, IoC, Port);

		/* Schedule Port RESET */
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);

		/* Start workaround Errata #2 timer */
		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
			SKGE_HWAC, SK_HWEV_WATIM, Para);

		break;

	case SK_HWEV_PORT_STOP:
#ifndef SK_SLIM
		if (pPrt->PHWLinkUp) {
			/*
			 * Signal directly to RLMT to ensure correct
			 * sequence of SWITCH and RESET event.
			 */
			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
		}
#endif /* !SK_SLIM */

		/* Stop Workaround Timer */
		SkTimerStop(pAC, IoC, &pPrt->PWaTimer);

		SkHWLinkDown(pAC, IoC, Port);
		break;

#ifndef SK_SLIM
	case SK_HWEV_UPDATE_STAT:
		/* We do NOT need to update any statistics */
		break;

	case SK_HWEV_CLEAR_STAT:
		/* We do NOT need to clear any statistics */
		for (Port = 0; Port < pAC->GIni.GIMacsFound; Port++) {
			pPrt->PPrevRx = 0;
			pPrt->PPrevFcs = 0;
			pPrt->PPrevShorts = 0;
		}
		break;

	case SK_HWEV_SET_LMODE:
		Val8 = (SK_U8)Para.Para32[1];
		if (pPrt->PLinkModeConf != Val8) {
			/* Set New link mode */
			pPrt->PLinkModeConf = Val8;

			/* Restart Port */
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
		}
		break;

	case SK_HWEV_SET_FLOWMODE:
		Val8 = (SK_U8)Para.Para32[1];
		if (pPrt->PFlowCtrlMode != Val8) {
			/* Set New Flow Control mode */
			pPrt->PFlowCtrlMode = Val8;

			/* Restart Port */
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
		}
		break;

	case SK_HWEV_SET_ROLE:
		/* not possible for fiber */
		if (!pAC->GIni.GICopperType) {
			break;
		}
		Val8 = (SK_U8)Para.Para32[1];
		if (pPrt->PMSMode != Val8) {
			/* Set New Role (Master/Slave) mode */
			pPrt->PMSMode = Val8;

			/* Restart Port */
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
		}
		break;

	case SK_HWEV_SET_SPEED:
		if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
			break;
		}
		Val8 = (SK_U8)Para.Para32[1];
		if (pPrt->PLinkSpeed != Val8) {
			/* Set New Speed parameter */
			pPrt->PLinkSpeed = Val8;

			/* Restart Port */
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
		}
		break;
#endif /* !SK_SLIM */

#ifdef GENESIS
	case SK_HWEV_HALFDUP_CHK:
		if (pAC->GIni.GIGenesis) {
			/*
			 * half duplex hangup workaround.
			 * See packet arbiter timeout interrupt for description
			 */
			pPrt->HalfDupTimerActive = SK_FALSE;
			if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {

				/* Snap statistic counters */
				(void)SkXmUpdateStats(pAC, IoC, Port);

				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32);

				Octets = (SK_U64)Val32 << 32;

				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32);

				Octets += Val32;

				if (pPrt->LastOctets == Octets) {
					/* Tx hanging, a FIFO flush restarts it */
					SkMacFlushTxFifo(pAC, IoC, Port);
				}
			}
		}
		break;
#endif /* GENESIS */

	default:
		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG);
		break;
	}

	return(0);
}	/* SkGeSirqEvent */


#ifdef GENESIS
/******************************************************************************
 *
 *	SkPhyIsrBcom() - PHY interrupt service routine
 *
 * Description: handles all interrupts from BCom PHY
 *
 * Returns: N/A
 */
static void SkPhyIsrBcom(
SK_AC		*pAC,		/* Adapter Context */
SK_IOC		IoC,		/* I/O Context */
int			Port,		/* Port Index (MAC_1 + n) */
SK_U16		IStatus)	/* Interrupt Status */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_EVPARA	Para;

	pPrt = &pAC->GIni.GP[Port];

	if ((IStatus & PHY_B_IS_PSE) != 0) {
		/* Incorrectable pair swap error */
		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022,
			SKERR_SIRQ_E022MSG);
	}

	if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) {

		SkHWLinkDown(pAC, IoC, Port);

		Para.Para32[0] = (SK_U32)Port;
		/* Signal to RLMT */
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);

		/* Start workaround Errata #2 timer */
		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
			SKGE_HWAC, SK_HWEV_WATIM, Para);
	}

}	/* SkPhyIsrBcom */
#endif /* GENESIS */


#ifdef YUKON
/******************************************************************************
 *
 *	SkPhyIsrGmac() - PHY interrupt service routine
 *
 * Description: handles all interrupts from Marvell PHY
 *
 * Returns: N/A
 */
static void SkPhyIsrGmac(
SK_AC		*pAC,		/* Adapter Context */
SK_IOC		IoC,		/* I/O Context */
int			Port,		/* Port Index (MAC_1 + n) */
SK_U16		IStatus)	/* Interrupt Status */
{
	SK_GEPORT	*pPrt;	/* GIni Port struct pointer */
	SK_EVPARA	Para;
#ifdef XXX
	SK_U16		Word;
#endif /* XXX */

	pPrt = &pAC->GIni.GP[Port];

	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("Port %d PHY IRQ, PhyIsrc: 0x%04X\n", Port, IStatus));

	if ((IStatus & PHY_M_IS_LST_CHANGE) != 0) {

		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
			("Link Status changed\n"));

		Para.Para32[0] = (SK_U32)Port;

		if (pPrt->PHWLinkUp) {

			SkHWLinkDown(pAC, IoC, Port);

#ifdef XXX
			SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word);

			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
				("AutoNeg.Adv: 0x%04X\n", Word));

			/* Set Auto-negotiation advertisement */
			if (pAC->GIni.GIChipId != CHIP_ID_YUKON_FE &&
				pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) {
				/* restore Asymmetric Pause bit */
				SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV,
					(SK_U16)(Word | PHY_M_AN_ASP));
			}
#endif /* XXX */

			/* Signal to RLMT */
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
		}
		else {
			if ((IStatus & PHY_M_IS_AN_COMPL) != 0) {
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
					("Auto-Negotiation completed\n"));
			}

			if ((IStatus & PHY_M_IS_LSP_CHANGE) != 0) {
				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
					("Link Speed changed\n"));
			}

			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_WATIM, Para);
		}
	}

	if ((IStatus & PHY_M_IS_AN_ERROR) != 0) {
		/* the copper PHY makes 1 retry */
		if (pAC->GIni.GICopperType) {
			/* not logged as error, it might be the first attempt */
			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
				("Auto-Negotiation Error\n"));
		}
		else {
			/* Auto-Negotiation Error */
			SK_ERR_LOG(pAC, SK_ERRCL_CONFIG, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG);
		}
	}

	if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) {
		/* FIFO Overflow/Underrun Error */
		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG);
	}

}	/* SkPhyIsrGmac */
#endif /* YUKON */


#ifdef OTHER_PHY
/******************************************************************************
 *
 *	SkPhyIsrLone() - PHY interrupt service routine
 *
 * Description: handles all interrupts from LONE PHY
 *
 * Returns: N/A
 */
static void SkPhyIsrLone(
SK_AC	*pAC,		/* Adapter Context */
SK_IOC	IoC,		/* I/O Context */
int		Port,		/* Port Index (MAC_1 + n) */
SK_U16	IStatus)	/* Interrupt Status */
{
	SK_EVPARA	Para;

	if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) {

		SkHWLinkDown(pAC, IoC, Port);

		Para.Para32[0] = (SK_U32)Port;
		/* Signal to RLMT */
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

}	/* SkPhyIsrLone */
#endif /* OTHER_PHY */

/* End of File */

#endif