/*******************************************************************************
Copyright (C) Marvell International Ltd. and its affiliates

This software file (the "File") is owned and distributed by Marvell
International Ltd. and/or its affiliates ("Marvell") under the following
alternative licensing terms.  Once you have made an election to distribute the
File under one of the following license alternatives, please (i) delete this
introductory statement regarding license alternatives, (ii) delete the two
license alternatives that you have not elected to use and (iii) preserve the
Marvell copyright notice above.

********************************************************************************
Marvell Commercial License Option

If you received this File from Marvell and you have entered into a commercial
license agreement (a "Commercial License") with Marvell, the File is licensed
to you under the terms of the applicable Commercial License.

********************************************************************************
Marvell GPL License Option

If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File in accordance with the terms and conditions of the General
Public License Version 2, June 1991 (the "GPL License"), a copy of which is
available along with the File in the license.txt file or by writing to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
on the worldwide web at http://www.gnu.org/licenses/gpl.txt.

THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED.  The GPL License provides additional details about this warranty
disclaimer.
********************************************************************************
Marvell BSD License Option

If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File under the following licensing terms.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

    *   Redistributions of source code must retain the above copyright notice,
	this list of conditions and the following disclaimer.

    *   Redistributions in binary form must reproduce the above copyright
	notice, this list of conditions and the following disclaimer in the
	documentation and/or other materials provided with the distribution.

    *   Neither the name of Marvell nor the names of its contributors may be
	used to endorse or promote products derived from this software without
	specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

*******************************************************************************/

#include "mvCommon.h"		/* Should be included before mvSysHwConfig */
#include "mvTypes.h"
#include "mvDebug.h"
#include "mvOs.h"
#include "mvNeta.h"
#include "bm/mvBm.h"

/*#define HWF_DBG mvOsPrintf*/
#define HWF_DBG(X...)

/*******************************************************************************
* mvNetaHwfInit - Init HWF registers of the port
* DESCRIPTION:
*
* INPUT:
*       int			port - NETA port number
*
* RETURN:   MV_STATUS
*               MV_OK - Success, Others - Failure
*
* NOTE:
*******************************************************************************/
MV_STATUS mvNetaHwfInit(int port)
{
	int					p, txp;
	MV_U32				regVal;
	MV_NETA_PORT_CTRL	*pPortCtrl;

	if ((port < 0) || (port >= mvNetaHalData.maxPort)) {
		mvOsPrintf("%s: port %d is out of range\n", __func__, port);
		return MV_OUT_OF_RANGE;
	}

	pPortCtrl = mvNetaPortHndlGet(port);
	if (pPortCtrl == NULL) {
		mvOsPrintf("%s: port %d is not initialized\n", __func__, port);
		return MV_FAIL;
	}

	/* Set TX Port base addresses */
	for (p = 0; p < mvNetaHalData.maxPort; p++) {
		pPortCtrl = mvNetaPortHndlGet(p);
		if (pPortCtrl == NULL)
			continue;

		for (txp = 0; txp < pPortCtrl->txpNum; txp++) {
			regVal = MV_REG_READ(NETA_HWF_TXP_CFG_REG(port, (p + txp)));
			regVal &= ~NETA_TXP_BASE_ADDR_MASK(p + txp);
			regVal |= ((NETA_TX_REG_BASE(p, txp) >> 10) << NETA_TXP_BASE_ADDR_OFFS(p + txp));
			MV_REG_WRITE(NETA_HWF_TXP_CFG_REG(port, (p + txp)), regVal);
		}
	}
	/* Init HWF RX Control register */
	regVal = NETA_GEM_PID_SRC_FLOW_ID;
	MV_REG_WRITE(NETA_HWF_RX_CTRL_REG(port), regVal);

	/* Set Small TX Gap */
	MV_REG_WRITE(NETA_HWF_TX_GAP_REG(port), NETA_HWF_SMALL_TX_GAP_MASK);

	return MV_OK;
}

/*******************************************************************************
 * mvNetaHwfBmPoolsSet - Set short and long pools to be used by HWF of the port
 *
 * INPUT:
 *       int        port	- port number
 *       int        short_pool	- BM pool for short buffers
 *       int        long_pool	- BM pool for long buffers
 *
 * RETURN:   MV_STATUS
 *               MV_OK - Success, Others - Failure
 *
 *******************************************************************************/
MV_STATUS mvNetaHwfBmPoolsSet(int port, int short_pool, int long_pool)
{
	MV_U32 regVal;

	regVal = MV_REG_READ(NETA_HWF_RX_CTRL_REG(port));

	regVal &= ~NETA_HWF_LONG_POOL_MASK;
	regVal |= NETA_HWF_LONG_POOL_ID(long_pool);

	regVal &= ~NETA_HWF_SHORT_POOL_MASK;
	regVal |= NETA_HWF_SHORT_POOL_ID(short_pool);

	MV_REG_WRITE(NETA_HWF_RX_CTRL_REG(port), regVal);

	return MV_OK;
}

/*******************************************************************************
 * mvNetaHwfEnable - Enable / Disable HWF of the port
 * DESCRIPTION:
 *
 * INPUT:
 *       int        port   - port number
 *       int        enable - 0 - disable, 1 - enable
 *
 * RETURN:   MV_STATUS
 *               MV_OK - Success, Others - Failure
 *
 * NOTE:
 *******************************************************************************/
MV_STATUS mvNetaHwfEnable(int port, int enable)
{
	MV_U32 regVal;

	regVal = MV_REG_READ(NETA_HWF_RX_CTRL_REG(port));
	if (enable)
		regVal |= NETA_HWF_ENABLE_MASK;
	else
		regVal &= ~NETA_HWF_ENABLE_MASK;

	MV_REG_WRITE(NETA_HWF_RX_CTRL_REG(port), regVal);

	return MV_OK;
}

/*******************************************************************************
 * mvNetaHwfTxqInit - Set TXQ base address and size, set default Drop configuration
 * DESCRIPTION:
 *
 * INPUT:
 *       int        rx_port:            RX port number
 *       int        tx_port, txp, txq:  port, TCONT and TXQ numbers
 *
 * RETURN:   MV_STATUS
 *               MV_OK - Success, Others - Failure
 *
 * NOTE:
 *******************************************************************************/
MV_STATUS mvNetaHwfTxqInit(int tx_port, int txp, int txq)
{
	MV_U32				regVal;
	MV_NETA_PORT_CTRL	*pPortCtrl;
	MV_NETA_QUEUE_CTRL	*pQueueCtrl;
	int					port, dropThresh;

	pPortCtrl = mvNetaPortHndlGet(tx_port);
	if (pPortCtrl == NULL) {
		mvOsPrintf("%s: port %d is not initialized\n", __func__, tx_port);
		return MV_NOT_INITIALIZED;
	}

	pQueueCtrl = &pPortCtrl->pTxQueue[txp * CONFIG_MV_ETH_TXQ + txq].queueCtrl;

	if (pQueueCtrl->pFirst == NULL) {
		mvOsPrintf("%s: tx_port=%d, txp=%d, txq=%d is not initialized\n",
					__func__, tx_port, txp, txq);
		return MV_NOT_INITIALIZED;
	}

	for (port = 0; port < mvNetaHalData.maxPort; port++) {

		pPortCtrl = mvNetaPortHndlGet(port);
		if (pPortCtrl == NULL)
			continue;

		regVal = NETA_HWF_TX_PORT_MASK(tx_port + txp) | NETA_HWF_TXQ_MASK(txq);
		MV_REG_WRITE(NETA_HWF_TX_PTR_REG(port), regVal);
		MV_REG_WRITE(NETA_HWF_TXQ_BASE_REG(port), pQueueCtrl->descBuf.bufPhysAddr);
		MV_REG_WRITE(NETA_HWF_TXQ_SIZE_REG(port), pQueueCtrl->lastDesc + 1);

		dropThresh = (CONFIG_MV_ETH_HWF_TXQ_DROP * (pQueueCtrl->lastDesc + 1)) / 100;
		regVal = (dropThresh << NETA_YELLOW_DROP_THRESH_OFFS) |
			    (CONFIG_MV_ETH_HWF_TXQ_DROP_RND << NETA_YELLOW_DROP_RND_GEN_OFFS);

		MV_REG_WRITE(NETA_HWF_DROP_TH_REG(port), regVal);
	}
	return MV_OK;
}

MV_STATUS mvNetaHwfTxqNextIndexGet(int port, int tx_port, int txp, int txq, int *val)
{
	MV_U32				regVal;

	regVal = NETA_HWF_TX_PORT_MASK(tx_port + txp) | NETA_HWF_TXQ_MASK(txq) | NETA_HWF_REG_MASK(3);
	MV_REG_WRITE(NETA_HWF_TX_PTR_REG(port), regVal);

	regVal = MV_REG_READ(NETA_HWF_MEMORY_REG(port));
	if (val)
		*val = (int)((regVal >> 16) & 0x3fff);

	return MV_OK;
}

/*******************************************************************************
 * mvNetaHwfTxqEnable - Enable / Disable HWF from the rx_port to tx_port/txp/txq
 * DESCRIPTION:
 *
 * INPUT:
 *       int        rx_port:            RX port number
 *       int        tx_port, txp, txq:  port, TCONT and TXQ numbers
 *       int        enable:             0 - disable, 1 - enable
 *
 * RETURN:   MV_STATUS
 *               MV_OK - Success, Others - Failure
 *
 * NOTE:
 *******************************************************************************/
MV_STATUS mvNetaHwfTxqEnable(int port, int tx_port, int txp, int txq, int enable)
{
	MV_U32 regVal;

	/* Enable HWF for each TXQ */
	regVal = NETA_HWF_TX_PORT_MASK(tx_port + txp) | NETA_HWF_TXQ_MASK(txq);
	MV_REG_WRITE(NETA_HWF_TX_PTR_REG(port), regVal);

	MV_REG_WRITE(NETA_HWF_TXQ_ENABLE_REG(port), enable << NETA_HWF_TXQ_ENABLE_BIT);

	return MV_OK;
}

/*******************************************************************************
 * mvNetaHwfTxqDropSet - Set HWF drop threshold
 * DESCRIPTION:
 *
 * INPUT:
 *       int        rx_port:            RX port number
 *       int        tx_port, txp, txq:  port, TCONT and TXQ numbers
 *       int        thresh, bits		drop configuration
 *
 * RETURN:   MV_STATUS
 *               MV_OK - Success, Others - Failure
 *
 * NOTE:
 *******************************************************************************/
MV_STATUS mvNetaHwfTxqDropSet(int port, int tx_port, int txp, int txq, int thresh, int bits)
{
	MV_U32 regVal, dropThresh;
	MV_NETA_PORT_CTRL *pPortCtrl;
	MV_NETA_QUEUE_CTRL *pQueueCtrl;

	pPortCtrl = mvNetaPortHndlGet(tx_port);
	if (pPortCtrl == NULL)
		return MV_FAIL;

	pQueueCtrl = &pPortCtrl->pTxQueue[txp * CONFIG_MV_ETH_TXQ + txq].queueCtrl;
	if (pQueueCtrl->pFirst == NULL)
		return MV_FAIL;

	/* Set HWF Drop parameters for specific TXQ */
	regVal = NETA_HWF_TX_PORT_MASK(tx_port + txp) | NETA_HWF_TXQ_MASK(txq);
	MV_REG_WRITE(NETA_HWF_TX_PTR_REG(port), regVal);

	dropThresh = (thresh * (pQueueCtrl->lastDesc + 1)) / 100;
	regVal = (dropThresh << NETA_YELLOW_DROP_THRESH_OFFS) | (bits << NETA_YELLOW_DROP_RND_GEN_OFFS);

	MV_REG_WRITE(NETA_HWF_DROP_TH_REG(port), regVal);

	return MV_OK;
}

/*******************************************************************************
 * mvNetaHwfMhSrcSet - Select MH source on TX during HWF (PNC or field in
 * 			HWF RX control register.
 * DESCRIPTION:
 *
 * INPUT:
 *       int        port;	port number
 *       int        mh_src; 0 - register field, 1 - PNC result info bits
 *
 * RETURN:   MV_STATUS
 *               MV_OK - Success, Others - Failure
 *
 * NOTE:
 *******************************************************************************/
MV_STATUS mvNetaHwfMhSrcSet(int port, MV_NETA_HWF_MH_SRC mh_src)
{
	MV_U32	regVal;

	regVal = MV_REG_READ(NETA_HWF_RX_CTRL_REG(port));

	switch (mh_src) {

	case MV_NETA_HWF_MH_REG:
		regVal &= ~NETA_MH_SRC_PNC_MASK;
		break;

	case MV_NETA_HWF_MH_PNC:
		regVal |= NETA_MH_SRC_PNC_MASK;
		break;

	default:
		mvOsPrintf("port=%d: Unexpected HWF MH source = %d value\n", port, mh_src);
		return MV_BAD_PARAM;
	}
	MV_REG_WRITE(NETA_HWF_RX_CTRL_REG(port), regVal);
	return MV_OK;

}

/*******************************************************************************
 * mvNetaHwfMhSelSet - Set MH value on TX during HWF.
 *
 * DESCRIPTION:
 *
 * INPUT:
 *       int        port;		port number
 *       int        mh_sel_nask;	use the following values as mask
 *					NETA_MH_DONT_CHANGE
 *					NETA_MH_REPLACE_GPON_HDR
 *					NETA_MH_REPLACE_MH_REG(r)
 * RETURN:   MV_STATUS
 *               MV_OK - Success, Others - Failure
 *
 * NOTE:
 *******************************************************************************/
MV_STATUS mvNetaHwfMhSelSet(int port, MV_U8 mh_sel_mask)
{
	MV_U32	regVal;

	regVal = MV_REG_READ(NETA_HWF_RX_CTRL_REG(port));
	regVal &= ~NETA_MH_SEL_MASK;
	regVal |= (mh_sel_mask & NETA_MH_SEL_MASK);

	MV_REG_WRITE(NETA_HWF_RX_CTRL_REG(port), regVal);
	return MV_OK;
}