/*******************************************************************************
Copyright (C) Marvell International Ltd. and its affiliates

********************************************************************************
Marvell GPL License Option

If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File in accordance with the terms and conditions of the General
Public License Version 2, June 1991 (the "GPL License"), a copy of which is
available along with the File in the license.txt file or by writing to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
on the worldwide web at http://www.gnu.org/licenses/gpl.txt.

THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED.  The GPL License provides additional details about this warranty
disclaimer.

*******************************************************************************/

#include <config.h>
#include <common.h>
#include <command.h>
#include <pci.h>
#include <net.h>

#include "mvCommon.h"
#include "ctrlEnv/mvCtrlEnvLib.h"
#include "boardEnv/mvBoardEnvLib.h"
#include "cpu/mvCpu.h"

#if defined(MV_INC_BOARD_NOR_FLASH)
#include "norflash/mvFlash.h"
#endif

#if defined(MV_INCLUDE_GIG_ETH)
#include "eth-phy/mvEthPhy.h"
#endif

#if defined(MV_INCLUDE_PEX)
#include "pex/mvPex.h"
#endif

#if defined(MV_INCLUDE_PDMA)
#include "pdma/mvPdma.h"
#include "mvSysPdmaApi.h"
#endif

#if defined(MV_INCLUDE_XOR)
#include "xor/mvXorRegs.h"
#include "xor/mvXor.h"
#endif

#if defined(MV_INCLUDE_PMU)
#include "pmu/mvPmuRegs.h"
#endif

#include "cntmr/mvCntmrRegs.h"

#if defined(CONFIG_CMD_BSP)

/******************************************************************************
* Category     - General
* Functionality- The commands allows the user to view the contents of the MV
*                internal registers and modify them.
* Need modifications (Yes/No) - no
*****************************************************************************/
int ir_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
	MV_U32 regNum = 0x0, regVal, regValTmp, res;
	MV_8 regValBin[40];
	MV_8 cmd[40];
	int i,j = 0, flagm = 0;
	extern MV_8 console_buffer[];

	if( argc == 2 ) {
		regNum = simple_strtoul( argv[1], NULL, 16 );
	}
	else {
		printf( "Usage:\n%s\n", cmdtp->usage );
		return 0;
	}

	regVal = MV_REG_READ( regNum + INTER_REGS_BASE);
	regValTmp = regVal;
	printf( "Internal register 0x%x value : 0x%x\n ",regNum, regVal );
	printf( "\n    31      24        16         8         0" );
	printf( "\n     |       |         |         |         |\nOLD: " );

	for( i = 31 ; i >= 0 ; i-- ) {
		if( regValTmp > 0 ) {
			res = regValTmp % 2;
			regValTmp = (regValTmp - res) / 2;
			if( res == 0 )
				regValBin[i] = '0';
			else
				regValBin[i] = '1';
		}
		else
			regValBin[i] = '0';
	}

	for( i = 0 ; i < 32 ; i++ ) {
		printf( "%c", regValBin[i] );
		if( (((i+1) % 4) == 0) && (i > 1) && (i < 31) )
			printf( "-" );
	}

	readline( "\nNEW: " );
	strcpy(cmd, console_buffer);
	if( (cmd[0] == '0') && (cmd[1] == 'x') ) {
		regVal = simple_strtoul( cmd, NULL, 16 );
		flagm=1;
	}
	else {
		for( i = 0 ; i < 40 ; i++ ) {
			if(cmd[i] == '\0')
				break;
			if( i == 4 || i == 9 || i == 14 || i == 19 || i == 24 || i == 29 || i == 34 )
				continue;
			if( cmd[i] == '1' ) {
				regVal = regVal | (0x80000000 >> j);
				flagm = 1;
			}
			else if( cmd[i] == '0' ) {
				regVal = regVal & (~(0x80000000 >> j));
				flagm = 1;
			}
			j++;
		}
	}

	if( flagm == 1 ) {
		MV_REG_WRITE( regNum + INTER_REGS_BASE, regVal );
		printf( "\nNew value = 0x%x\n\n", MV_REG_READ(regNum +
					INTER_REGS_BASE) );
	}
	return 1;
}

U_BOOT_CMD(
	ir,      2,     1,      ir_cmd,
	"ir	- reading and changing MV internal register values.\n",
	" address\n"
	"\tDisplays the contents of the internal register in 2 forms, hex and binary.\n"
	"\tIt's possible to change the value by writing a hex value beginning with \n"
	"\t0x or by writing 0 or 1 in the required place. \n"
	"\tPressing enter without any value keeps the value unchanged.\n"
);

/******************************************************************************
* Category     - General
* Functionality- Display temperature from sensor.
* Need modifications (Yes/No) - no
*****************************************************************************/
int temperature_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	printf("Junction Temprature (Tj) = %d\n", mvCtrlGetJuncTemp());

	return 1;
}

U_BOOT_CMD(
	temp,      1,     1,      temperature_cmd,
	"temp	- Display the device temperature.\n",
	" \n \tDisplay the device temperature as read from the internal sensor.\n"

);

int reset_count_cmd(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
	MV_U32 resetCount, resetLimit;
	char *bootcmd, *tmpStr = getenv("reset_count");
	char countStr[10];

	resetCount = tmpStr ? simple_strtoul(tmpStr, NULL, 16) : 0;

	tmpStr = getenv("reset_limit");
	resetLimit = tmpStr ? simple_strtoul(tmpStr, NULL, 10) : 0;

	if( (resetLimit > 0) && (resetCount >= resetLimit)){
		printf("Reset limit reached, Creset stopped.\n Reset reset_count or reset_limit to continue\n");
		return 1;
	}

	/* in 1st time, save original boot command in 'bootcmd_Creset' env varialble */
	if (resetCount == 0) {
		bootcmd = getenv("bootcmd");
		setenv("bootcmd_Creset", bootcmd);
		/* replace boot command with 'Creset' or 'Creset boot' */
		if( argc >= 2 && strcmp( argv[1], "boot") == 0)
			setenv("bootcmd", "Creset boot");
		else
			setenv("bootcmd", "Creset");
	}

	printf("\nreset_count = %d\n" , resetCount);
	sprintf(countStr, "%x", ++resetCount);
	setenv("reset_count", countStr);
	run_command("saveenv", 0);

	/* if requested 'Creset boot' run boot command instead of reset */
	if( argc >= 2 && strcmp( argv[1], "boot") == 0)
		run_command("run bootcmd_Creset", 0);
	else
		run_command("reset", 0);

	return 1;
}

U_BOOT_CMD(Creset, 2, 1, reset_count_cmd,
	"Creset	- Run 'reset' or boot command in a loop, while counting.\n",
	" \n"
	"    \t'Creset'      - loop and count reset tries:\n"
	"    \t'Creset boot' - loop and count boot tries:\n\n"
	"    \tto restart count, set count value to 1, save, and run boot:\n"
	"    \t'setenv reset_count 1; saveenv; boot;'\n"
	"    \t'to limit resets sequence set reset_limit to limit value'\n"
);

#if defined(MV_INCLUDE_PMU)
/******************************************************************************
* Category     - General
* Functionality- Display temperature from sensor.
* Need modifications (Yes/No) - no
*****************************************************************************/
int volt_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	MV_U32 reg = 0, reg1 = 0;
	MV_U32 value = 0;
	int i = 0;
	char *cmd, *s;

	if (argc < 2)
		goto usage;

	cmd = argv[1];

	if (strncmp(cmd, "cpu", 3) != 0 && strncmp(cmd, "core", 4) != 0)
		goto usage;

	reg = MV_REG_READ(PMU_TEMP_DIOD_CTRL0_REG);
	reg |= PMU_TDC0_SEL_IP_MODE_MASK;
	MV_REG_WRITE(PMU_TEMP_DIOD_CTRL0_REG, PMU_TDC0_SEL_IP_MODE_MASK);

	if (strncmp(cmd, "cpu", 3) == 0) {
		reg = MV_REG_READ(PMU_TEMP_DIOD_CTRL0_REG);
		reg &= ~(PMU_TDC0_SEL_VSEN_MASK);
		MV_REG_WRITE(PMU_TEMP_DIOD_CTRL0_REG, reg);
	}
	if (strncmp(cmd, "core", 3) == 0) {
		reg = MV_REG_READ(PMU_TEMP_DIOD_CTRL0_REG);
		reg |= PMU_TDC0_SEL_VSEN_MASK;
		MV_REG_WRITE(PMU_TEMP_DIOD_CTRL0_REG, reg);
	}
	udelay(1000);
	/* Verify that the temperature is valid */
	reg = MV_REG_READ(PMU_TEMP_DIOD_CTRL1_REG);
	if ((reg & PMU_TDC1_TEMP_VLID_MASK) == 0x0)
	{
		printf("Error reading voltage\n");
	}
	else
	{
		reg1 = MV_REG_READ(PMU_THERMAL_MNGR_REG);
		reg1 = ((reg1 >> 1) & 0x1FF);
		for (i = 0; i < 16; i++)
		{
			/* Read the thermal sensor looking for two successive readings that differ in LSB only */
			reg = MV_REG_READ(PMU_THERMAL_MNGR_REG);
			reg = ((reg >> 1) & 0x1FF);
			if (((reg ^ reg1) & 0x1FE) == 0x0)
				break;
			/* save the current reading for the next iteration */
			reg1 = reg;
		}
		value = ((reg + 241)*10000/39619);
		if (i == 16)
			printf("Voltage sensor is unstable: could not get two identical successive readings\n");
		else
			printf("Voltage (V) = %d.%d, Register Value = 0x%08X\n", value/100, value%100, reg);
	}
	return 0;
usage:
	printf("Usage:\n%s\n", cmdtp->usage);
	return 1;
}

U_BOOT_CMD(
	volt,      2,     1,      volt_cmd,
	"volt	- Display the cpu / core voltage.\n",
	"volt cpu	- display the cpu voltage\n"
	"volt core	- display the core voltage\n"
);
#endif /* #if defined(MV_INCLUDE_PMU) */

/******************************************************************************
* Functional only when using Lauterbach to load image into DRAM
* Category     - DEBUG
* Functionality- Display the array of registers the u-boot write to.
*
*****************************************************************************/
#if defined(REG_DEBUG)
int reg_arry[4096][2];
int reg_arry_index = 0;
int print_registers( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	int i;
	printf("Register display\n");

	for (i=0; i < reg_arry_index; i++)
		printf("Reg no %d addr 0x%x = 0x%08x\n", i, reg_arry[i][0], reg_arry[i][1]);

	return 1;
}

U_BOOT_CMD(
	printreg,      1,     1,      print_registers,
	"printreg	- Display the register array the u-boot write to.\n",
	" \n"
	"\tDisplay the register array the u-boot write to.\n"
);
#endif

#if defined(MV_INCLUDE_GIG_ETH)
/******************************************************************************
* Category     - Etherent
* Functionality- Display PHY ports status (using SMI access).
* Need modifications (Yes/No) - No
*****************************************************************************/
int sg_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	MV_U32 port;
	for( port = 0 ; port < mvCtrlEthMaxPortGet(); port++ ) {

		printf( "PHY %d :\n", port );
		printf( "---------\n" );

		mvEthPhyPrintStatus((MV_U32)mvBoardPhyAddrGet(port) );

		printf("\n");
	}
	return 1;
}

U_BOOT_CMD(
	sg,      1,     1,      sg_cmd,
	"sg	- scanning the PHYs status\n",
	" \n"
	"\tScan all the Gig port PHYs and display their Duplex, Link, Speed and AN status.\n"
);
#endif /* #if defined(MV_INCLUDE_GIG_ETH) */

#if defined(MV_INCLUDE_PDMA)

/******************************************************************************
* Category     - PDMA
* Functionality- Perform a PDMA transaction
* Need modifications (Yes/No) - No
*****************************************************************************/
int mvPdma_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
	MV_8 cmd[20];
	extern MV_8 console_buffer[];
	MV_U32 src, dst, byteCount;
	MV_PDMA_CHANNEL chan;

	/* get PDMA channel */

	/* source address */
	while(1) {
		readline( "Source Address: " );
		strcpy( cmd, console_buffer );
		src = simple_strtoul( cmd, NULL, 16 );
		if( src == 0xffffffff ) printf( "Bad address !!!\n" );
		else break;
	}

	/* desctination address */
	while(1) {
		readline( "Destination Address: " );
		strcpy(cmd, console_buffer);
		dst = simple_strtoul( cmd, NULL, 16 );
		if( dst == 0xffffffff ) printf("Bad address !!!\n");
		else break;
	}

	/* byte count */
	while(1) {
		readline( "Byte Count (up to 8KByte (0 - 0x1FFF)): " );
		strcpy( cmd, console_buffer );
		byteCount = simple_strtoul( cmd, NULL, 16 );
		if( (byteCount >= 0x2000) || (byteCount == 0) ) printf("Bad value !!!\n");
		else break;
	}

	if (mvPdmaChanAlloc(MV_PDMA_MEMORY, 0, &chan) != MV_OK) {
		printf("Error allocating PDMA channel\n");
		return 0;
	}
	/* wait for previous transfer completion */
	while(mvPdmaChannelStateGet(&chan) == MV_PDMA_CHANNEL_RUNNING);
	/* issue the transfer */
	if (mvPdmaChanTransfer(&chan, MV_PDMA_MEM_TO_MEM, src, dst, byteCount, 0) != MV_OK) {
		printf("Error with PDMA transfer\n");
	}
	/* wait for completion */
	while(mvPdmaChannelStateGet(&chan) == MV_PDMA_CHANNEL_RUNNING);
	if (mvPdmaChanFree(&chan) != MV_OK) {
		printf("Error freeing PDMA channel\n");
		return 0;
	}

	printf( "Done...\n" );
	return 1;
}

U_BOOT_CMD(
	pdma,      1,     1,      mvPdma_cmd,
	"pdma	- Perform PDMA\n",
	" \n"
	"\tPerform PDMA memory to memory transaction with the parameters given by the user.\n"
);

#endif /* #if defined(MV_INCLUDE_PDMA) */

#if defined(MV_INCLUDE_XOR)

/******************************************************************************
* Category     - DMA
* Functionality- Perform a DMA transaction using the XOR engine
* Need modifications (Yes/No) - No
*****************************************************************************/
#define XOR_TIMEOUT 0x8000000

struct xor_channel_t
{
	MV_CRC_DMA_DESC *pDescriptor;
	MV_ULONG	descPhyAddr;
};

#define XOR_CAUSE_DONE_MASK(chan) ((BIT0|BIT1) << (chan * 16) )
void xor_waiton_eng(int chan)
{
    int timeout = 0;

    while(!(MV_REG_READ(XOR_CAUSE_REG(XOR_UNIT(chan))) & XOR_CAUSE_DONE_MASK(XOR_CHAN(chan))))
    {
	if(timeout > XOR_TIMEOUT)
	    goto timeout;
	timeout++;
    }

    timeout = 0;
    while(mvXorStateGet(chan) != MV_IDLE)
    {
	if(timeout > XOR_TIMEOUT)
	    goto timeout;
	timeout++;
    }
    /* Clear int */
    MV_REG_WRITE(XOR_CAUSE_REG(XOR_UNIT(chan)), ~(XOR_CAUSE_DONE_MASK(XOR_CHAN(chan))));

timeout:
    if(timeout > XOR_TIMEOUT)
    {
	printf("ERR: XOR eng got timedout!!\n");
    }
    return;
}
int mvDma_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
	MV_8 cmd[20], c;
	extern MV_8 console_buffer[];
	MV_U32 chan, src, dst, byteCount, ctrlLo, ctrlOvrrid;
	MV_UNIT_WIN_INFO win;
    struct xor_channel_t channel;
    MV_U8	*pVirt = (MV_U8*)mvOsIoUncachedAlignedMalloc(NULL, 32, sizeof(MV_XOR_DESC),
					    &(channel.descPhyAddr), NULL);

	MV_BOOL err;
	/* XOR channel */
	if( argc == 2 )
		chan = simple_strtoul( argv[1], NULL, 16 );
	else
		chan = 0;

	/* source address */
	while(1) {
		readline( "Physical Source Address (must be cache-line aligned): " );
		strcpy( cmd, console_buffer );
		src = simple_strtoul( cmd, NULL, 16 );
		if ((src == 0xffffffff) || (src & 0x1F)) printf( "Bad address !!!\n" );
		else break;
	}

	/* desctination address */
	while(1) {
		readline( "Physical Destination Address (must be cache-line aligned): " );
		strcpy(cmd, console_buffer);
		dst = simple_strtoul( cmd, NULL, 16 );
		if ((dst == 0xffffffff) || (dst & 0x1F)) printf("Bad address !!!\n");
		else break;
	}

	/* byte count */
	while(1) {
		readline( "Byte Count (up to (16M-1), must be a multiple of the cache-line): " );
		strcpy( cmd, console_buffer );
		byteCount = simple_strtoul( cmd, NULL, 16 );
		if( (byteCount > 0xffffff) || (byteCount == 0) ) printf("Bad value !!!\n");
		else break;
	}
	/* compose the command */
	ctrlLo = (1 << XEXCR_REG_ACC_PROTECT_OFFS);
#if defined(MV_CPU_BE)
	ctrlLo |= (XEXCR_DES_SWP_MASK);
/* 				| (1 << XEXCR_DRD_RES_SWP_OFFS)
				| (1 << XEXCR_DWR_REQ_SWP_OFFS);
*/
#endif


	/* set data transfer limit */
	while(1) {
		printf( "Source Data transfer limit(DTL):\n" );
		printf( "(2) 32  bytes at a time.\n" );
		printf( "(3) 64  bytes at a time.\n" );
		printf( "(4) 128 bytes at a time.\n" );

		c = getc();
		printf( "%c\n", c );

		err = MV_FALSE;

		switch( c ) {
			case 13: /* Enter */
				ctrlLo |= (2 << XEXCR_SRC_BURST_LIMIT_OFFS);
				printf( "32 bytes at a time.\n" );
				break;
			case '2':
				ctrlLo |= (2 << XEXCR_SRC_BURST_LIMIT_OFFS);
				break;
			case '3':
				ctrlLo |= (3 << XEXCR_SRC_BURST_LIMIT_OFFS);
				break;
			case '4':
				ctrlLo |= (4 << XEXCR_SRC_BURST_LIMIT_OFFS);
				break;
			default:
				printf( "Bad value !!!\n" );
				err = MV_TRUE;
		}

		if( !err ) break;
	}
	while(1) {
		printf( "Destination Data transfer limit(DTL):\n" );
		printf( "(2) 32  bytes at a time.\n" );
		printf( "(3) 64  bytes at a time.\n" );
		printf( "(4) 128 bytes at a time.\n" );

		c = getc();
		printf( "%c\n", c );

		err = MV_FALSE;

		switch( c ) {
			case 13: /* Enter */
				ctrlLo |= (2 << XEXCR_DST_BURST_LIMIT_OFFS);
				printf( "32 bytes at a time.\n" );
				break;
			case '2':
				ctrlLo |= (2 << XEXCR_DST_BURST_LIMIT_OFFS);
				break;
			case '3':
				ctrlLo |= (3 << XEXCR_DST_BURST_LIMIT_OFFS);
				break;
			case '4':
				ctrlLo |= (4 << XEXCR_DST_BURST_LIMIT_OFFS);
				break;
			default:
				printf( "Bad value !!!\n" );
				err = MV_TRUE;
		}

		if( !err ) break;
	}

	/* set ovveride source option */

	/* read the override control register */
	ctrlOvrrid =  MV_REG_READ(XOR_OVERRIDE_CTRL_REG(chan));
	ctrlOvrrid &= ~((1 << XEAOCR_SA0OVR_EN_OFFS) |
					(3 << XEAOCR_SA0OVRPTR_OFFS) |
					(1 << XEAOCR_DA0OVR_EN_OFFS) |
					(3 << XEAOCR_DA0OVRPTR_OFFS));

	while(1) {
		printf( "Override Source:\n" );
		printf( "(9) - no override (default)\n" );
		mvXorTargetWinRead( chan,0, &win );
		printf( "Win0 base=%08x, size=%llx, Attrib=0x%x, ID=%d\n",
					win.addrWin.baseLow, win.addrWin.size,win.attrib,   win.targetId);

		printf( "(0) - use Win0 (%s)\n",mvCtrlTargetNameGet(win.targetId));
		mvXorTargetWinRead( chan,1, &win );
		printf( "Win1 base=%08x, size=%llx, Attrib=0x%x, ID=%d\n",
					win.addrWin.baseLow, win.addrWin.size,win.attrib,   win.targetId);

		printf( "(1) - use Win1 (%s)\n",mvCtrlTargetNameGet(win.targetId));
		mvXorTargetWinRead( chan,2, &win );
		printf( "(2) - use Win2 (%s)\n",mvCtrlTargetNameGet(win.targetId));
		mvXorTargetWinRead( chan,3, &win );
		printf( "(3) - use Win3 (%s)\n",mvCtrlTargetNameGet(win.targetId));

		c = getc();
		printf( "%c\n", c );

		err = MV_FALSE;

		switch( c ) {
			case 13: /* Enter */
			case '9':
				printf( "No override\n" );
				break;
			case '0':
			case '1':
			case '2':
			case '3':
				ctrlOvrrid |= (1 << XEAOCR_SA0OVR_EN_OFFS) |
							 ((c - '0') << XEAOCR_SA0OVRPTR_OFFS);
				break;
			default:
				printf("Bad value !!!\n");
				err = MV_TRUE;
		}

		if( !err ) break;
	}

	/* set override destination option */
	while(1) {
		printf( "Override Destination:\n" );
		printf( "(9) - no override (default)\n" );
		mvXorTargetWinRead( chan,0, &win );
		printf( "(0) - use Win0 (%s)\n",mvCtrlTargetNameGet(win.targetId));
		mvXorTargetWinRead( chan,1, &win );
		printf( "(1) - use Win1 (%s)\n",mvCtrlTargetNameGet(win.targetId));
		mvXorTargetWinRead( chan,2, &win );
		printf( "(2) - use Win2 (%s)\n",mvCtrlTargetNameGet(win.targetId));
		mvXorTargetWinRead( chan,3, &win );
		printf( "(3) - use Win3 (%s)\n",mvCtrlTargetNameGet(win.targetId));

		c = getc();
		printf( "%c\n", c );

		err = MV_FALSE;

	        switch( c ) {
			case 13: /* Enter */
			case '9':
				printf( "No override\n" );
				break;
			case '0':
			case '1':
			case '2':
			case '3':
				ctrlOvrrid |= (1 << XEAOCR_DA0OVR_EN_OFFS) |
							 ((c - '0') << XEAOCR_DA0OVRPTR_OFFS);
				break;
			default:
				printf("Bad value !!!\n");
				err = MV_TRUE;
		}

		if( !err ) break;
	}


	/* wait for previous transfer completion */
	while (mvXorStateGet(chan) != MV_IDLE);

	mvXorCtrlSet( chan, ctrlLo );

	/* save the override control register */
	MV_REG_WRITE(XOR_OVERRIDE_CTRL_REG(chan), ctrlOvrrid);

	/* build the channel descriptor */
	channel.pDescriptor = (MV_CRC_DMA_DESC *)pVirt;
        channel.pDescriptor->srcAdd0 = src;
        channel.pDescriptor->srcAdd1 = 0;
	channel.pDescriptor->destAdd = dst;
        channel.pDescriptor->byteCnt = byteCount;
        channel.pDescriptor->nextDescPtr = 0;
        channel.pDescriptor->status = BIT31;
        channel.pDescriptor->descCommand = 0x0;

	/* issue the transfer */
	if (mvXorTransfer(chan, MV_DMA, channel.descPhyAddr) != MV_OK)
		printf("Error in DMA(XOR) Operation\n");

	/* wait for completion */
	xor_waiton_eng(chan);

	mvOsIoUncachedAlignedFree(NULL, sizeof(MV_XOR_DESC), channel.descPhyAddr, pVirt, 0);

	printf( "Done...\n" );
	return 1;
}

U_BOOT_CMD(
	dma,      1,     1,      mvDma_cmd,
	"dma	- Perform DMA using the XOR engine\n",
	" \n"
	"\tPerform DMA transaction with the parameters given by the user.\n"
);
#endif /* #if defined(MV_INCLUDE_XOR) */

/******************************************************************************
* Category     - Memory
* Functionality- Displays the MV's Memory map
* Need modifications (Yes/No) - Yes
*****************************************************************************/
int displayMemoryMap_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	mvCtrlAddrDecShow();
	return 1;
}

U_BOOT_CMD(
	map,      1,     1,      displayMemoryMap_cmd,
	"map	- Display address decode windows\n",
	" \n"
	"\tDisplay controller address decode windows: CPU, PCI, Gig, DMA, XOR and COMM\n"
);


/******************************************************************************
* Category     - MonExt
*****************************************************************************/
int printTempMsg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	printf("This command allocated for monitor extinction\n");
	return 1;
}

U_BOOT_CMD(
	tempCmd0,      1,     1,      printTempMsg,
	"tempCmd - This command allocated for monitor extinction\n",
	" "
);

U_BOOT_CMD(
	tempCmd1,      1,     1,      printTempMsg,
	"tempCmd - This command allocated for monitor extinction\n",
	" "
);

U_BOOT_CMD(
	tempCmd2,      1,     1,      printTempMsg,
	"tempCmd - This command allocated for monitor extinction\n",
	" "
);

U_BOOT_CMD(
	tempCmd3,      1,     1,      printTempMsg,
	"tempCmd - This command allocated for monitor extinction\n",
	" "
);


#if defined(MV_INC_BOARD_DDIM)

/******************************************************************************
* Category     - Memory
* Functionality- Displays the SPD information for a givven dimm
* Need modifications (Yes/No) -
*****************************************************************************/

int dimminfo_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
        int num = 0;

        if (argc > 1) {
                num = simple_strtoul (argv[1], NULL, 10);
        }

        printf("*********************** DIMM%d *****************************\n",num);

        dimmSpdPrint(num);

        printf("************************************************************\n");

        return 1;
}

U_BOOT_CMD(
        ddimm,      2,     1,      dimminfo_cmd,
        "ddimm  - Display SPD Dimm Info\n",
        " [0/1]\n"
        "\tDisplay Dimm 0/1 SPD information.\n"
);

/******************************************************************************
* Category     - Memory
* Functionality- Copy the SPD information of dimm 0 to dimm 1
* Need modifications (Yes/No) -
*****************************************************************************/

int spdcpy_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{

        printf("Copy DIMM 0 SPD data into DIMM 1 SPD...");

        if (MV_OK != dimmSpdCpy())
		printf("\nDIMM SPD copy fail!\n");
	else
		printf("Done\n");

        return 1;
}

U_BOOT_CMD(
        spdcpy,      2,     1,      spdcpy_cmd,
        "spdcpy  - Copy Dimm 0 SPD to Dimm 1 SPD \n",
        ""
        ""
);
#endif /* #if defined(MV_INC_BOARD_DDIM) */

#ifdef CONFIG_MV_XSMI
#include "eth-phy/mvEthPhyXsmi.h"
#include "ctrlEnv/mvCtrlNetCompLib.h"

int xsmi_phy_read_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	MV_U16 phyReg;

	if (argc < 4) {
		printf("command need three arguments\n");
		cmd_usage(cmdtp);
		return 1;
	}
	/* NSS need to be enabled before each access and disabled right after,
	   in order to access the PHY registers via PSS window */
	mvNetComplexNssSelect(1);
	mvEthPhyXsmiRegRead(simple_strtoul(argv[1], NULL, 16),
			simple_strtoul(argv[2], NULL, 16),
			simple_strtoul(argv[3], NULL, 16), &phyReg);
	mvNetComplexNssSelect(0);

	printf("0x%x\n", phyReg);

	return 1;
}

U_BOOT_CMD(
	xsmiPhyRead,      4,     4, xsmi_phy_read_cmd,
	"xsmiPhyRead	- Read Phy register through XSMI interface\n",
	" <Phy Address> <Dev Address> <Reg Offset>. \n"
	"\tRead the Phy register through XSMI interface. \n"
);

int xsmi_phy_write_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
	if (argc < 5) {
		printf("command need four arguments\n");
		cmd_usage(cmdtp);
		return 1;
	}
	/* NSS need to be enabled before each access and disabled right after,
	   in order to access the PHY registers via PSS window */
	mvNetComplexNssSelect(1);
	mvEthPhyXsmiRegWrite(simple_strtoul(argv[1], NULL, 16),
			simple_strtoul(argv[2], NULL, 16),
			simple_strtoul(argv[3], NULL, 16),
			simple_strtoul(argv[4], NULL, 16));
	mvNetComplexNssSelect(0);

	return 1;
}

U_BOOT_CMD(
	xsmiPhyWrite,      5,     5, xsmi_phy_write_cmd,
	"xsmiPhyWrite	- Write Phy register through XSMI interface\n",
	" <Phy Address> <Dev Address> <Reg Offset> <Value>. \n"
	"\tWrite to Phy register through XSMI interface. \n"
);

#endif /* CONFIG_MV_XSMI */

#if defined(MV_INCLUDE_GIG_ETH)

#include "eth-phy/mvEthPhy.h"

int phy_dump_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	/* bitmask of registers we print */
	static unsigned int page_regs[] = {
		/*32222222222211111111110000000000*/	/* reg 31->0 */
		/*10987654321098765432109876543210*/

		0b00000100101111111000011111111111,	/* page 0 */
		0b00000111101011111000000111111111,
		0b00000000001111010000000000000000,
		0b00000000000011110000000000000000,
		0b00001111101111110000000001110011,
		0b00011111101111110000000000000000,
		0b00000111100101110000000000000000,
		0b00011110001111110000000000000000,
		0b00000000000000001111111100000111,
		0b00000000000000000000000000101111,
		0b00000000000000000000000000000000,
		0b00000000000000000000000000000000,
		0b00000000000000001111111100111111,
		0b00000000000000000000000000000000,
		0b00000000000000001100000100001111,	/* page 14 */

	};

	MV_U16 phyReg;
	int phy = simple_strtoul( argv[1], NULL, 16 );

	int i, j;
	int num_pages = sizeof page_regs / sizeof *page_regs;
	unsigned int* pp;

	printf("   ");	// %2d:
	for (i = 0; i < num_pages; i++) {
		printf(" %4d", i);
	}
	printf("\n");

	for (i = 0; i < 32; i++) {
		unsigned int todo = 0;
		printf("%2d:", i);
		for (j = 0, pp = page_regs; j < num_pages; j++, pp++) {
			unsigned int p = *pp;
			p >>= i;

			if (!(p & 1)) {
				printf(" %4s", "-");
			} else {
				mvEthPhyRegWrite(phy, 0x16, j);	// page
				mvEthPhyRegRead(phy, i, &phyReg);
				printf(" %04x", phyReg);
			}

			p >>= 1;
			todo |= p;
		}
		printf("\n");
		if (todo == 0)
			break;
	}
	return 1;
}

U_BOOT_CMD(
	phydump,      2,     2,      phy_dump_cmd,
	"phydump	- dump all Phy registers\n",
	" Phy_address. \n"
	"\tDump the Phy registers. \n"
);

int phy_read_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	MV_U16 phyReg;

	mvEthPhyRegRead(simple_strtoul( argv[1], NULL, 16 ),
	                simple_strtoul( argv[2], NULL, 16), &phyReg);

	printf ("0x%x\n", phyReg);

	return 1;
}

U_BOOT_CMD(
	phyRead,      3,     3,      phy_read_cmd,
	"phyRead	- Read Phy register\n",
	" Phy_address Phy_offset. \n"
	"\tRead the Phy register. \n"
);


int phy_write_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	mvEthPhyRegWrite(simple_strtoul( argv[1], NULL, 16 ),
					 simple_strtoul( argv[2], NULL, 16 ),
					 simple_strtoul( argv[3], NULL, 16 ));

	return 1;
}

U_BOOT_CMD(
	phyWrite,      4,     4,      phy_write_cmd,
	"phyWrite	- Write Phy register\n",
	" Phy_address Phy_offset value.\n"
	"\tWrite to the Phy register.\n"
);

#if defined(MV_INCLUDE_SWITCH)
#include "ethSwitch/mvSwitch.h"

int switch_read_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	MV_U16 phyReg;

	mvEthSwitchRegRead(simple_strtoul( argv[1], NULL, 16 ),
					   simple_strtoul( argv[2], NULL, 16), simple_strtoul( argv[3], NULL, 16 ), &phyReg);

	printf ("0x%x\n", phyReg);

	return 1;
}

U_BOOT_CMD(
	switchRegRead,      4,     4,      switch_read_cmd,
	"switchRegRead	- Read switch register\n",
	" Port_number Phy_address Phy_offset. \n"
	"\tRead the switch register. \n"
);


int switch_write_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	mvEthSwitchRegWrite(simple_strtoul( argv[1], NULL, 16 ),
						simple_strtoul( argv[2], NULL, 16 ), simple_strtoul( argv[3], NULL, 16 ),
										simple_strtoul( argv[4], NULL, 16 ));

	return 1;
}

U_BOOT_CMD(
	switchRegWrite,      5,     5,      switch_write_cmd,
	"switchRegWrite	- Write switch register\n",
	" Port_number Phy_address Phy_offset value.\n"
	"\tWrite to the switch register.\n"
);

int switch_phy_read_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	MV_U16 phyReg;

	mvEthSwitchPhyRegRead(simple_strtoul( argv[1], NULL, 16 ), simple_strtoul( argv[2], NULL, 16 ),
						  simple_strtoul( argv[3], NULL, 16 ), &phyReg);

	printf ("0x%x\n", phyReg);
	return 1;
}

U_BOOT_CMD(
	switchPhyRegRead,      4,     4,      switch_phy_read_cmd,
	"- Read switch register\n",
	" SW_on_port Port_number Phy_offset. \n"
	"\tRead the switch register. \n"
);

int switch_phy_write_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	mvEthSwitchPhyRegWrite(simple_strtoul( argv[1], NULL, 16 ),
						   simple_strtoul( argv[2], NULL, 16 ), simple_strtoul( argv[3], NULL, 16 ),
										   simple_strtoul( argv[4], NULL, 16 ));

	return 1;
}

U_BOOT_CMD(
	switchPhyRegWrite,      5,     4,      switch_phy_write_cmd,
	"- Write switch register\n",
	" SW_on_port Port_number Phy_offset value.\n"
	"\tWrite to the switch register.\n"
);

int switch_cntread_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	MV_U16 data;
	MV_U32 port;
	MV_U32 i;

	port = simple_strtoul(argv[1], NULL, 16);
	printf("Switch on port = %d.\n", port);
	for(i = 0; i < 7; i++) {
		/* Set egress counter */
		mvEthSwitchRegWrite(port, 0x1B, 0x1D, 0xC400 | ((i + 1) << 5) | 0xE);
		do {
			mvEthSwitchRegRead(port, 0x1B, 0x1D, &data);
		} while(data & 0x8000);
		/* Read egress counter */
		mvEthSwitchRegRead(port, 0x1B, 0x1F, &data);
		printf("Port %d: Egress 0x%x, Ingress ", i, data);
		/* Set ingress counter */
		mvEthSwitchRegWrite(port, 0x1B, 0x1D, 0xC400 | ((i + 1) << 5) | 0x0);
		do {
			mvEthSwitchRegRead(port, 0x1B, 0x1D, &data);
		} while(data & 0x8000);
		/* Read egress counter */
		mvEthSwitchRegRead(port, 0x1B, 0x1F, &data);
		printf("0x%x.\n", data);
	}

	/* Clear all counters */
	mvEthSwitchRegWrite(port, 0x1B, 0x1D, 0x94C0);
	do {
		mvEthSwitchRegRead(port, 0x1B, 0x1D, &data);
	} while(data & 0x8000);

	return 1;
}

U_BOOT_CMD(
	switchCountersRead,      2,     2,      switch_cntread_cmd,
	"switchCntPrint	- Read switch port counters.\n",
	" MAC_Port. \n"
	"\tRead the switch ports counters. \n"
);
#endif
#endif /* #if defined(MV_INCLUDE_GIG_ETH) */

#define REG_SDRAM_CONFIG_ADDR					0x1400
#define REG_DDR3_RANK_CTRL_ADDR					0x15E0
#define REG_READ_DATA_SAMPLE_DELAYS_ADDR		0x1538
#define REG_READ_DATA_READY_DELAYS_ADDR			0x153C
#define REG_PHY_REGISTRY_FILE_ACCESS_ADDR		0x16A0

/******************************************************************************
* Category     - DDR3 Training
* Functionality- The commands prints the results of the DDR3 Training
* Need modifications (Yes/No) - no
*****************************************************************************/
#ifdef MV_DDR_TRAINING_CMD_NEW_TIP
unsigned int trainingReadPhyReg(int uiRegAddr, int uiPup)
{
	unsigned int uiReg;
    unsigned int addrLow = 0x3F & uiRegAddr;
    unsigned int addrHi = ((0xC0 & uiRegAddr) >> 6);

	uiReg = (1 << 31) + (uiPup << 22) + (addrHi << 28) + (addrLow << 16);
	MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg&0x7FFFFFFF);
	MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg);

	do {
		uiReg = ((MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & (1 << 31));
	} while (uiReg);				/* Wait for '0' to mark the end of the transaction */

	uiReg = MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);
	uiReg = uiReg & 0xFFFF;

	return uiReg;
}

int training_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
	MV_U32 uiCsEna,uiCs,uiReg,uiPup,uiPhase,uiDelay,
			uiRdRdyDly,uiRdSmplDly,uiDq, uiCentralTxRes, uiCentralRxRes;
	MV_U32 uiPupNum;

	uiCsEna = MV_REG_READ(REG_DDR3_RANK_CTRL_ADDR) & 0xF;
	printf("DDR3 Training results: \n");

	uiPupNum = 5;

	for (uiCs = 0; uiCs < 4; uiCs++) {
		if (uiCsEna & (1 << uiCs)) {
			printf("CS: %d \n", uiCs);
			for(uiPup = 0; uiPup < uiPupNum; uiPup++) {

				uiReg = trainingReadPhyReg(0 + uiCs*4,uiPup);
				uiPhase = (uiReg >> 6) & 0x7;
				uiDelay = uiReg & 0x1F;
				printf("Write Leveling: PUP: %d, Phase: %d, Delay: %d\n",uiPup,uiPhase,uiDelay);
			}

			for (uiPup = 0; uiPup < uiPupNum; uiPup++) {

				uiReg = trainingReadPhyReg(2 + uiCs*4,uiPup);
				uiPhase = (uiReg >> 6) & 0x7;
				uiDelay = uiReg & 0x1F;
				printf("Read Leveling: PUP: %d, Phase: %d, Delay: %d\n",uiPup, uiPhase, uiDelay);
			}

			uiRdRdyDly = ((MV_REG_READ(REG_READ_DATA_READY_DELAYS_ADDR) >> (8*uiCs)) & 0x1F);
			uiRdSmplDly = ((MV_REG_READ(REG_READ_DATA_SAMPLE_DELAYS_ADDR) >> (8*uiCs)) & 0x1F);
			printf("Read Sample Delay:\t%d\n",uiRdSmplDly);
			printf("Read Ready Delay:\t%d\n",uiRdRdyDly);

			/* PBS */
			if (uiCs == 0) {
				for (uiPup=0;uiPup<uiPupNum;uiPup++) {
					for (uiDq = 0; uiDq < 10 ;uiDq++) {
						if (uiDq == 9)
							uiDq++;

						uiReg = trainingReadPhyReg(0x10+uiDq+uiCs*0x12,uiPup);
						uiDelay = uiReg & 0x1F;

						if (uiDq == 0)
							printf("PBS TX: PUP: %d: ", uiPup);
						printf("%d ", uiDelay);
					}
					printf("\n");
				}
				for(uiPup=0; uiPup < uiPupNum; uiPup++) {
					for(uiDq = 0; uiDq < 9; uiDq++) {
						uiReg = trainingReadPhyReg(0x50+uiDq+uiCs*0x12,uiPup);
						uiDelay = uiReg & 0x1F;

						if (uiDq == 0)
							printf("PBS RX: PUP: %d: ", uiPup);
						printf("%d ", uiDelay);
					}
					printf("\n");
				}
			}

			/*Read Centralization windows sizes for Scratch PHY registers*/
			for(uiPup = 0; uiPup < uiPupNum; uiPup++)
			{
				uiReg = trainingReadPhyReg(0xC0+uiCs,uiPup);
				uiCentralRxRes = uiReg >> 5;
				uiCentralTxRes = uiReg & 0x1F;
				printf("Central window size for PUP %d is %d(RX) and %d(TX)\n", uiPup, uiCentralRxRes, uiCentralTxRes);
			}
		}
	}

	return 1;
}
#else
int training_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
#define REG_PHY_OP_OFFS							31
#define REG_PHY_CS_OFFS							16
#define REG_PHY_PUP_OFFS						22
#define CENTRAL_RESULTS_PUP0					0x1504
#define CENTRAL_RESULTS_PUP1					0x150C
#define CENTRAL_RESULTS_PUP2					0x1514
#define CENTRAL_RESULTS_PUP3					0x151C

	MV_U32 uiCsEna,uiCs,uiReg,uiPup,uiPhase,uiDelay,
			uiDQS,uiRdRdyDly,uiRdSmplDly,uiDq;
	MV_U32 uiPupNum;

	uiCsEna = MV_REG_READ(REG_DDR3_RANK_CTRL_ADDR) & 0xF;
	printf("DDR3 Training results: \n");

	uiPupNum = 4;

	for (uiCs = 0; uiCs < 4; uiCs++) {
		if (uiCsEna & (1 << uiCs)) {
			printf("CS: %d \n", uiCs);
			for(uiPup = 0; uiPup < uiPupNum; uiPup++) {
				uiReg = (1 << REG_PHY_OP_OFFS) | (uiPup << REG_PHY_PUP_OFFS) | ((0x4*uiCs) << REG_PHY_CS_OFFS);
				MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg);  /* 0x16A0 */

				do {
					uiReg = ((MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & (1 << REG_PHY_OP_OFFS));
				} while (uiReg);				/* Wait for '0' to mark the end of the transaction */

				uiReg = MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);  /* 0x16A0 */
				uiPhase = (uiReg >> 6) & 0x7;
				uiDelay = uiReg & 0x1F;

				uiReg = (1 << REG_PHY_OP_OFFS) | (uiPup << REG_PHY_PUP_OFFS) | ((0x4*uiCs+0x1) << REG_PHY_CS_OFFS);
				MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg);  /* 0x16A0 */

				do {
					uiReg = ((MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & (1 << REG_PHY_OP_OFFS)); 
				} while (uiReg);				/* Wait for '0' to mark the end of the transaction */

				uiReg = MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);  /* 0x16A0 */
				uiDQS = (uiReg & 0x3F) - uiDelay;

				printf("Write Leveling: PUP: %d, Phase: %d, Delay: %d, DQS: %d \n",uiPup,uiPhase,uiDelay,uiDQS);
			}

			for (uiPup = 0; uiPup < uiPupNum; uiPup++) {
				uiReg = (1 << REG_PHY_OP_OFFS) | (uiPup << REG_PHY_PUP_OFFS) | ((0x4*uiCs+0x2) << REG_PHY_CS_OFFS);
				MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg);  /* 0x16A0 */

				do {
					uiReg = ((MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & (1 << REG_PHY_OP_OFFS));
				} while (uiReg);				/* Wait for '0' to mark the end of the transaction */

				uiReg = MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);  /* 0x16A0 */
				uiPhase = (uiReg >> 6) & 0x7;
				uiDelay = uiReg & 0x1F;

				uiReg = (1 << REG_PHY_OP_OFFS) | (uiPup << REG_PHY_PUP_OFFS) | ((0x4*uiCs+0x3) << REG_PHY_CS_OFFS);
				MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg);  /* 0x16A0 */

				do {
					uiReg = ((MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & (1 << REG_PHY_OP_OFFS)); 
				} while (uiReg);				/* Wait for '0' to mark the end of the transaction */

				uiReg = MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);  /* 0x16A0 */
				uiDQS = uiReg & 0x3F;

				printf("Read Leveling: PUP: %d, Phase: %d, Delay: %d, DQS: %d \n",uiPup, uiPhase, uiDelay, uiDQS);
			}

			uiRdRdyDly = ((MV_REG_READ(REG_READ_DATA_READY_DELAYS_ADDR) >> (8*uiCs)) & 0x1F);
			uiRdSmplDly = ((MV_REG_READ(REG_READ_DATA_SAMPLE_DELAYS_ADDR) >> (8*uiCs)) & 0x1F);
			printf("Read Sample Delay:\t%d\n",uiRdSmplDly);
			printf("Read Ready Delay:\t%d\n",uiRdRdyDly);

			/* PBS */
			if (uiCs == 0) {
				for (uiPup=0;uiPup<uiPupNum;uiPup++) {
					for (uiDq = 0; uiDq < 10 ;uiDq++) {
						if (uiDq == 9)
							uiDq++;
						uiReg = (1 << REG_PHY_OP_OFFS) | (uiPup << REG_PHY_PUP_OFFS) | ((0x10+uiDq) << REG_PHY_CS_OFFS);
						MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg);  /* 0x16A0 */

						do {
							uiReg = ((MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & (1 << REG_PHY_OP_OFFS));
						} while (uiReg);				/* Wait for '0' to mark the end of the transaction */

						uiReg = MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);  /* 0x16A0 */
						uiDelay = uiReg & 0x1F;

						if (uiDq == 0)
							printf("PBS TX: PUP: %d: ", uiPup);
 						if (uiDq < 8)
							printf("DQ:%d-%d,", uiDq, uiDelay);
						else if (uiDq == 8)
							printf("\nPBS TX: PUP: %d, DQS-%d \n", uiPup, uiDelay);
						else
							printf("PBS TX: PUP: %d, DM-%d \n", uiPup, uiDelay);
					}
				}
				for(uiPup=0; uiPup < uiPupNum; uiPup++) {
					for(uiDq = 0; uiDq < 9; uiDq++) {
						uiReg = (1 << REG_PHY_OP_OFFS) | (uiPup << REG_PHY_PUP_OFFS) | ((0x30+uiDq) << REG_PHY_CS_OFFS);
						MV_REG_WRITE(REG_PHY_REGISTRY_FILE_ACCESS_ADDR,uiReg);  /* 0x16A0 */

						do {
							uiReg = ((MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & (1 << REG_PHY_OP_OFFS));
						} while (uiReg);				/* Wait for '0' to mark the end of the transaction */

						uiReg = MV_REG_READ(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);  /* 0x16A0 */
						uiDelay = uiReg & 0x1F;

						if (uiDq == 0)
							printf("PBS RX: PUP: %d: ", uiPup);
 						if (uiDq < 8)
							printf("DQ:%d-%d,", uiDq, uiDelay);
						if (uiDq == 8)
							printf("\nPBS RX: PUP: %d, DQS-%d \n", uiPup, uiDelay);
					}
				}
			}
		}
	}

	return 1;
}
#endif

U_BOOT_CMD(
		   training,      1,     1,      training_cmd,
	 "training	- prints the results of the DDR3 Training.\n",""
 );

#ifdef MV_DDR_TRAINING_CMD_NEW_TIP

#define WL_PHY_REG                        (0x0)
#define WRITE_CENTRALIZATION_PHY_REG      (0x1)
#define RL_PHY_REG                        (0x2)
#define READ_CENTRALIZATION_PHY_REG       (0x3)
#define RESULT_DB_PHY_REG_ADDR			  0xC0
#define PAD_CONFIG_PHY_REG                (0xA8)

/******************************************************************************
* Category     - DDR3 Training
* Functionality- The commands prints the row data of stability results for DDR3 Training
* Need modifications (Yes/No) - no
*****************************************************************************/
int trainingStability_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
	MV_U32 uiCsEna, interfaceId=0,csindex = 0,busId=0,padIndex=0;
	MV_U32 regData;
	MV_U32 readData;

	uiCsEna = MV_REG_READ(REG_DDR3_RANK_CTRL_ADDR) & 0xF;

	/*Title print*/
	for(interfaceId = 0; interfaceId < 1; interfaceId++)
	{
		printf("Title: I/F# , Tj,CalibrationN0,CalibrationP0,CalibrationN1,CalibrationP1,CalibrationN2,CalibrationP2,");
		for(csindex = 0; csindex < 4; csindex++)
		{
			if (!(uiCsEna & (1 << csindex))) continue;
			printf("CS%d , ",csindex);
			for(busId = 0; busId < 5; busId++)
			{
				#ifdef CONFIG_DDR3/*DDR3*/
					printf("VWTx,VWRx,WL_tot,WL_ADLL,WL_PH,RL_Tot,RL_ADLL,RL_PH,RL_Smp,CenTx,CenRx,Vref,DQVref,");
				#else/*DDR4*/
					printf("DminTx,AreaTx,DminRx,AreaRx,WL_tot,WL_ADLL,WL_PH,RL_Tot,RL_ADLL,RL_PH,RL_Smp,CenTx,CenRx,Vref,DQVref,");
				#endif
				#ifdef CONFIG_DDR3
				#else
				for(padIndex = 0; padIndex < 10; padIndex++)
				{
					printf("DC-Pad%d,",padIndex);
				}
				#endif
				for(padIndex = 0; padIndex < 10; padIndex++)
				{
					printf("PBSTx-Pad%d,",padIndex);
				}
				for(padIndex = 0; padIndex < 10; padIndex++)
				{
					printf("PBSRx-Pad%d,",padIndex);
				}
			}
		}
	}
	printf("\n");

	/*Data print*/
	for(interfaceId = 0; interfaceId < 1; interfaceId++)
	{
		printf("Data: %d,%d,",interfaceId,mvCtrlGetJuncTemp());//add Junction Temperature
		readData = MV_REG_READ(0x14C8);
		printf("%d,%d,",((readData&0x3F0)>>4),((readData&0xFC00)>>10));
		readData = MV_REG_READ(0x17C8);
		printf("%d,%d,",((readData&0x3F0)>>4),((readData&0xFC00)>>10));
		readData = MV_REG_READ(0x1DC8);
		printf("%d,%d,",((readData&0x3F0000)>>16),((readData&0xFC00000)>>22));
		for(csindex = 0; csindex < 4; csindex++)
		{
			if (!(uiCsEna & (1 << csindex))) continue;
			printf("CS%d , ",csindex);
			for(busId = 0; busId <5; busId++)
			{
				#ifdef CONFIG_DDR3/*DDR3*/
				regData = trainingReadPhyReg(RESULT_DB_PHY_REG_ADDR+csindex,busId);
				printf("%d,%d,",(regData&0x1F),((regData&0x3E0)>>5));
				#else/*DDR4*/
				regData = trainingReadPhyReg(RESULT_DB_PHY_REG_ADDR+csindex,busId);
				printf("%d,%d,",(regData&0x1F)*4,2*((regData&0xFFE0)>>5));
				regData = trainingReadPhyReg(RESULT_DB_PHY_REG_ADDR+csindex + 4,busId);
				printf("%d,%d,",(regData&0x1F)*4,2*((regData&0xFFE0)>>5));
				#endif
				/*WL*/
				regData = trainingReadPhyReg(WL_PHY_REG+csindex*4,busId);
				printf("%d,%d,%d,",(regData&0x1F)+((regData&0x1C0)>>6)*32,(regData&0x1F),(regData&0x1C0)>>6);
				/*RL*/
				readData = MV_REG_READ(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
				readData = (readData&(0xF<<(4*csindex))) >> (4*csindex);
				regData = trainingReadPhyReg(RL_PHY_REG+csindex*4,busId);
				printf("%d,%d,%d,%d,",(regData&0x1F)+((regData&0x1C0)>>6)*32 + readData*64,(regData&0x1F),((regData&0x1C0)>>6),readData);
				/*Centralization*/
				regData = trainingReadPhyReg(WRITE_CENTRALIZATION_PHY_REG+csindex*4,busId);
				printf("%d,",(regData&0x3F));
				regData = trainingReadPhyReg(READ_CENTRALIZATION_PHY_REG+csindex*4,busId);
				printf("%d,",(regData&0x1F));
				/*Vref */
				regData = trainingReadPhyReg(PAD_CONFIG_PHY_REG+csindex,busId);
				printf("%d,",(regData&0x7));
				/*DQVref*/
				/* Need to add the Read Function from device*/
				printf("%d,",0);
				#ifndef CONFIG_DDR3
				for(padIndex = 0; padIndex < 10; padIndex++)
				{
					regData = trainingReadPhyReg(0xD0+12*csindex+padIndex,busId);
					printf("%d,",(regData&0x3F));
				}
				#endif
				for(padIndex = 0; padIndex < 10; padIndex++)
				{
					regData = trainingReadPhyReg(0x10+16*csindex+padIndex,busId);
					printf("%d,",(regData&0x3F));
				}
				for(padIndex = 0; padIndex < 10; padIndex++)
				{
					regData = trainingReadPhyReg(0x50+16*csindex+padIndex,busId);
					printf("%d,",(regData&0x3F));
				}
			}
		}
	}
	printf("\n");

	return MV_OK;
}

U_BOOT_CMD(
		   trainingStability,      1,     1,      trainingStability_cmd,
	 "training	- prints the results of the DDR3 Training.\n",""
 );

#endif/*NewTip*/

#endif /* MV_TINY */

int whoAmI_cmd( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
	printf("cpu #: %d", whoAmI());
	return 1;
}

U_BOOT_CMD(
		   whoAmI,      2,     1,      whoAmI_cmd,
	 "- reading CPU ID\n",
	""
		  );