| /****************************************************************** |
| * Copyright 2008 Mentor Graphics Corporation |
| * Copyright (C) 2008 by Texas Instruments |
| * |
| * This file is part of the Inventra Controller Driver for Linux. |
| * |
| * The Inventra Controller Driver for Linux is free software; you |
| * can redistribute it and/or modify it under the terms of the GNU |
| * General Public License version 2 as published by the Free Software |
| * Foundation. |
| * |
| * The Inventra Controller Driver for Linux is distributed in |
| * the hope that it will be useful, but WITHOUT ANY WARRANTY; |
| * without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| * License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with The Inventra Controller Driver for Linux ; if not, |
| * write to the Free Software Foundation, Inc., 59 Temple Place, |
| * Suite 330, Boston, MA 02111-1307 USA |
| * |
| * ANY DOWNLOAD, USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION |
| * OF THIS DRIVER INDICATES YOUR COMPLETE AND UNCONDITIONAL ACCEPTANCE |
| * OF THOSE TERMS.THIS DRIVER IS PROVIDED "AS IS" AND MENTOR GRAPHICS |
| * MAKES NO WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THIS DRIVER. |
| * MENTOR GRAPHICS SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES |
| * OF MERCHANTABILITY; FITNESS FOR A PARTICULAR PURPOSE AND |
| * NON-INFRINGEMENT. MENTOR GRAPHICS DOES NOT PROVIDE SUPPORT |
| * SERVICES OR UPDATES FOR THIS DRIVER, EVEN IF YOU ARE A MENTOR |
| * GRAPHICS SUPPORT CUSTOMER. |
| ******************************************************************/ |
| |
| #ifndef __MUSB_HDRC_DEFS_H__ |
| #define __MUSB_HDRC_DEFS_H__ |
| |
| #include <usb_defs.h> |
| #include <asm/io.h> |
| |
| #ifdef CONFIG_USB_BLACKFIN |
| # include "blackfin_usb.h" |
| #endif |
| |
| #define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */ |
| |
| /* EP0 */ |
| struct musb_ep0_regs { |
| u16 reserved4; |
| u16 csr0; |
| u16 reserved5; |
| u16 reserved6; |
| u16 count0; |
| u8 host_type0; |
| u8 host_naklimit0; |
| u8 reserved7; |
| u8 reserved8; |
| u8 reserved9; |
| u8 configdata; |
| }; |
| |
| /* EP 1-15 */ |
| struct musb_epN_regs { |
| u16 txmaxp; |
| u16 txcsr; |
| u16 rxmaxp; |
| u16 rxcsr; |
| u16 rxcount; |
| u8 txtype; |
| u8 txinterval; |
| u8 rxtype; |
| u8 rxinterval; |
| u8 reserved0; |
| u8 fifosize; |
| }; |
| |
| /* Mentor USB core register overlay structure */ |
| #ifndef musb_regs |
| struct musb_regs { |
| /* common registers */ |
| u8 faddr; |
| u8 power; |
| u16 intrtx; |
| u16 intrrx; |
| u16 intrtxe; |
| u16 intrrxe; |
| u8 intrusb; |
| u8 intrusbe; |
| u16 frame; |
| u8 index; |
| u8 testmode; |
| /* indexed registers */ |
| u16 txmaxp; |
| u16 txcsr; |
| u16 rxmaxp; |
| u16 rxcsr; |
| u16 rxcount; |
| u8 txtype; |
| u8 txinterval; |
| u8 rxtype; |
| u8 rxinterval; |
| u8 reserved0; |
| u8 fifosize; |
| /* fifo */ |
| u32 fifox[16]; |
| /* OTG, dynamic FIFO, version & vendor registers */ |
| u8 devctl; |
| u8 reserved1; |
| u8 txfifosz; |
| u8 rxfifosz; |
| u16 txfifoadd; |
| u16 rxfifoadd; |
| u32 vcontrol; |
| u16 hwvers; |
| u16 reserved2a[1]; |
| u8 ulpi_busctl; |
| u8 reserved2b[1]; |
| u16 reserved2[3]; |
| u8 epinfo; |
| u8 raminfo; |
| u8 linkinfo; |
| u8 vplen; |
| u8 hseof1; |
| u8 fseof1; |
| u8 lseof1; |
| u8 reserved3; |
| /* target address registers */ |
| struct musb_tar_regs { |
| u8 txfuncaddr; |
| u8 reserved0; |
| u8 txhubaddr; |
| u8 txhubport; |
| u8 rxfuncaddr; |
| u8 reserved1; |
| u8 rxhubaddr; |
| u8 rxhubport; |
| } tar[16]; |
| /* |
| * endpoint registers |
| * ep0 elements are valid when array index is 0 |
| * otherwise epN is valid |
| */ |
| union musb_ep_regs { |
| struct musb_ep0_regs ep0; |
| struct musb_epN_regs epN; |
| } ep[16]; |
| |
| } __attribute__((packed)); |
| #endif |
| |
| /* |
| * MUSB Register bits |
| */ |
| |
| /* POWER */ |
| #define MUSB_POWER_ISOUPDATE 0x80 |
| #define MUSB_POWER_SOFTCONN 0x40 |
| #define MUSB_POWER_HSENAB 0x20 |
| #define MUSB_POWER_HSMODE 0x10 |
| #define MUSB_POWER_RESET 0x08 |
| #define MUSB_POWER_RESUME 0x04 |
| #define MUSB_POWER_SUSPENDM 0x02 |
| #define MUSB_POWER_ENSUSPEND 0x01 |
| #define MUSB_POWER_HSMODE_SHIFT 4 |
| |
| /* INTRUSB */ |
| #define MUSB_INTR_SUSPEND 0x01 |
| #define MUSB_INTR_RESUME 0x02 |
| #define MUSB_INTR_RESET 0x04 |
| #define MUSB_INTR_BABBLE 0x04 |
| #define MUSB_INTR_SOF 0x08 |
| #define MUSB_INTR_CONNECT 0x10 |
| #define MUSB_INTR_DISCONNECT 0x20 |
| #define MUSB_INTR_SESSREQ 0x40 |
| #define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */ |
| |
| /* DEVCTL */ |
| #define MUSB_DEVCTL_BDEVICE 0x80 |
| #define MUSB_DEVCTL_FSDEV 0x40 |
| #define MUSB_DEVCTL_LSDEV 0x20 |
| #define MUSB_DEVCTL_VBUS 0x18 |
| #define MUSB_DEVCTL_VBUS_SHIFT 3 |
| #define MUSB_DEVCTL_HM 0x04 |
| #define MUSB_DEVCTL_HR 0x02 |
| #define MUSB_DEVCTL_SESSION 0x01 |
| |
| /* ULPI VBUSCONTROL */ |
| #define ULPI_USE_EXTVBUS 0x01 |
| #define ULPI_USE_EXTVBUSIND 0x02 |
| |
| /* TESTMODE */ |
| #define MUSB_TEST_FORCE_HOST 0x80 |
| #define MUSB_TEST_FIFO_ACCESS 0x40 |
| #define MUSB_TEST_FORCE_FS 0x20 |
| #define MUSB_TEST_FORCE_HS 0x10 |
| #define MUSB_TEST_PACKET 0x08 |
| #define MUSB_TEST_K 0x04 |
| #define MUSB_TEST_J 0x02 |
| #define MUSB_TEST_SE0_NAK 0x01 |
| |
| /* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */ |
| #define MUSB_FIFOSZ_DPB 0x10 |
| /* Allocation size (8, 16, 32, ... 4096) */ |
| #define MUSB_FIFOSZ_SIZE 0x0f |
| |
| /* CSR0 */ |
| #define MUSB_CSR0_FLUSHFIFO 0x0100 |
| #define MUSB_CSR0_TXPKTRDY 0x0002 |
| #define MUSB_CSR0_RXPKTRDY 0x0001 |
| |
| /* CSR0 in Peripheral mode */ |
| #define MUSB_CSR0_P_SVDSETUPEND 0x0080 |
| #define MUSB_CSR0_P_SVDRXPKTRDY 0x0040 |
| #define MUSB_CSR0_P_SENDSTALL 0x0020 |
| #define MUSB_CSR0_P_SETUPEND 0x0010 |
| #define MUSB_CSR0_P_DATAEND 0x0008 |
| #define MUSB_CSR0_P_SENTSTALL 0x0004 |
| |
| /* CSR0 in Host mode */ |
| #define MUSB_CSR0_H_DIS_PING 0x0800 |
| #define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */ |
| #define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */ |
| #define MUSB_CSR0_H_NAKTIMEOUT 0x0080 |
| #define MUSB_CSR0_H_STATUSPKT 0x0040 |
| #define MUSB_CSR0_H_REQPKT 0x0020 |
| #define MUSB_CSR0_H_ERROR 0x0010 |
| #define MUSB_CSR0_H_SETUPPKT 0x0008 |
| #define MUSB_CSR0_H_RXSTALL 0x0004 |
| |
| /* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */ |
| #define MUSB_CSR0_P_WZC_BITS \ |
| (MUSB_CSR0_P_SENTSTALL) |
| #define MUSB_CSR0_H_WZC_BITS \ |
| (MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \ |
| | MUSB_CSR0_RXPKTRDY) |
| |
| /* TxType/RxType */ |
| #define MUSB_TYPE_SPEED 0xc0 |
| #define MUSB_TYPE_SPEED_SHIFT 6 |
| #define MUSB_TYPE_SPEED_HIGH 1 |
| #define MUSB_TYPE_SPEED_FULL 2 |
| #define MUSB_TYPE_SPEED_LOW 3 |
| #define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */ |
| #define MUSB_TYPE_PROTO_SHIFT 4 |
| #define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */ |
| #define MUSB_TYPE_PROTO_BULK 2 |
| #define MUSB_TYPE_PROTO_INTR 3 |
| |
| /* CONFIGDATA */ |
| #define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */ |
| #define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */ |
| #define MUSB_CONFIGDATA_BIGENDIAN 0x20 |
| #define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */ |
| #define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */ |
| #define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */ |
| #define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */ |
| #define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */ |
| |
| /* TXCSR in Peripheral and Host mode */ |
| #define MUSB_TXCSR_AUTOSET 0x8000 |
| #define MUSB_TXCSR_MODE 0x2000 |
| #define MUSB_TXCSR_DMAENAB 0x1000 |
| #define MUSB_TXCSR_FRCDATATOG 0x0800 |
| #define MUSB_TXCSR_DMAMODE 0x0400 |
| #define MUSB_TXCSR_CLRDATATOG 0x0040 |
| #define MUSB_TXCSR_FLUSHFIFO 0x0008 |
| #define MUSB_TXCSR_FIFONOTEMPTY 0x0002 |
| #define MUSB_TXCSR_TXPKTRDY 0x0001 |
| |
| /* TXCSR in Peripheral mode */ |
| #define MUSB_TXCSR_P_ISO 0x4000 |
| #define MUSB_TXCSR_P_INCOMPTX 0x0080 |
| #define MUSB_TXCSR_P_SENTSTALL 0x0020 |
| #define MUSB_TXCSR_P_SENDSTALL 0x0010 |
| #define MUSB_TXCSR_P_UNDERRUN 0x0004 |
| |
| /* TXCSR in Host mode */ |
| #define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200 |
| #define MUSB_TXCSR_H_DATATOGGLE 0x0100 |
| #define MUSB_TXCSR_H_NAKTIMEOUT 0x0080 |
| #define MUSB_TXCSR_H_RXSTALL 0x0020 |
| #define MUSB_TXCSR_H_ERROR 0x0004 |
| #define MUSB_TXCSR_H_DATATOGGLE_SHIFT 8 |
| |
| /* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */ |
| #define MUSB_TXCSR_P_WZC_BITS \ |
| (MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \ |
| | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY) |
| #define MUSB_TXCSR_H_WZC_BITS \ |
| (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \ |
| | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY) |
| |
| /* RXCSR in Peripheral and Host mode */ |
| #define MUSB_RXCSR_AUTOCLEAR 0x8000 |
| #define MUSB_RXCSR_DMAENAB 0x2000 |
| #define MUSB_RXCSR_DISNYET 0x1000 |
| #define MUSB_RXCSR_PID_ERR 0x1000 |
| #define MUSB_RXCSR_DMAMODE 0x0800 |
| #define MUSB_RXCSR_INCOMPRX 0x0100 |
| #define MUSB_RXCSR_CLRDATATOG 0x0080 |
| #define MUSB_RXCSR_FLUSHFIFO 0x0010 |
| #define MUSB_RXCSR_DATAERROR 0x0008 |
| #define MUSB_RXCSR_FIFOFULL 0x0002 |
| #define MUSB_RXCSR_RXPKTRDY 0x0001 |
| |
| /* RXCSR in Peripheral mode */ |
| #define MUSB_RXCSR_P_ISO 0x4000 |
| #define MUSB_RXCSR_P_SENTSTALL 0x0040 |
| #define MUSB_RXCSR_P_SENDSTALL 0x0020 |
| #define MUSB_RXCSR_P_OVERRUN 0x0004 |
| |
| /* RXCSR in Host mode */ |
| #define MUSB_RXCSR_H_AUTOREQ 0x4000 |
| #define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400 |
| #define MUSB_RXCSR_H_DATATOGGLE 0x0200 |
| #define MUSB_RXCSR_H_RXSTALL 0x0040 |
| #define MUSB_RXCSR_H_REQPKT 0x0020 |
| #define MUSB_RXCSR_H_ERROR 0x0004 |
| #define MUSB_S_RXCSR_H_DATATOGGLE 9 |
| |
| /* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */ |
| #define MUSB_RXCSR_P_WZC_BITS \ |
| (MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \ |
| | MUSB_RXCSR_RXPKTRDY) |
| #define MUSB_RXCSR_H_WZC_BITS \ |
| (MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \ |
| | MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY) |
| |
| /* HUBADDR */ |
| #define MUSB_HUBADDR_MULTI_TT 0x80 |
| |
| /* Endpoint configuration information. Note: The value of endpoint fifo size |
| * element should be either 8,16,32,64,128,256,512,1024,2048 or 4096. Other |
| * values are not supported |
| */ |
| struct musb_epinfo { |
| u8 epnum; /* endpoint number */ |
| u8 epdir; /* endpoint direction */ |
| u16 epsize; /* endpoint FIFO size */ |
| }; |
| |
| /* |
| * Platform specific MUSB configuration. Any platform using the musb |
| * functionality should create one instance of this structure in the |
| * platform specific file. |
| */ |
| struct musb_config { |
| struct musb_regs *regs; |
| u32 timeout; |
| u8 musb_speed; |
| u8 extvbus; |
| }; |
| |
| /* externally defined data */ |
| extern struct musb_config musb_cfg; |
| extern struct musb_regs *musbr; |
| |
| /* exported functions */ |
| extern void musb_start(void); |
| extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt); |
| extern void write_fifo(u8 ep, u32 length, void *fifo_data); |
| extern void read_fifo(u8 ep, u32 length, void *fifo_data); |
| |
| #if defined(CONFIG_USB_BLACKFIN) |
| /* Every USB register is accessed as a 16-bit even if the value itself |
| * is only 8-bits in size. Fun stuff. |
| */ |
| # undef readb |
| # define readb(addr) (u8)bfin_read16(addr) |
| # undef writeb |
| # define writeb(b, addr) bfin_write16(addr, b) |
| # undef MUSB_TXCSR_MODE /* not supported */ |
| # define MUSB_TXCSR_MODE 0 |
| /* |
| * The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY. |
| * However, it has no ULPI support - so there are no registers at all. |
| * That means accesses to ULPI_BUSCONTROL have to be abstracted away. |
| */ |
| static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr) |
| { |
| return 0; |
| } |
| static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val) |
| {} |
| #else |
| static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr) |
| { |
| return readb(&musbr->ulpi_busctl); |
| } |
| static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val) |
| { |
| writeb(val, &musbr->ulpi_busctl); |
| } |
| #endif |
| |
| #endif /* __MUSB_HDRC_DEFS_H__ */ |
