#include <Copyright.h>
/********************************************************************************
* gtMiiSmiIf.c
*
* DESCRIPTION:
*       Includes functions prototypes for initializing and accessing the
*       MII / SMI interface.
*       This is the only file to be included from upper layers.
*
* DEPENDENCIES:
*       None.
*
* FILE REVISION NUMBER:
*       $Revision: 3 $
*
*******************************************************************************/

#include <gtDrvSwRegs.h>
#include <gtHwCntl.h>
#include <gtMiiSmiIf.h>
#include <platformDeps.h>
#include <gtSem.h>

/* Local sub-functions */
GT_BOOL qdMultiAddrRead (GT_QD_DEV* dev, unsigned int phyAddr , unsigned int MIIReg,
                        unsigned int* value);
GT_BOOL qdMultiAddrWrite (GT_QD_DEV* dev, unsigned int phyAddr , unsigned int MIIReg,
                       unsigned int value);
static GT_BOOL fgtReadMii(GT_QD_DEV*dev, unsigned int phyAddr, unsigned int miiReg, unsigned int* value);
static GT_BOOL fgtWriteMii(GT_QD_DEV*dev, unsigned int phyAddr, unsigned int miiReg, unsigned int value);

#ifdef GT_RMGMT_ACCESS
static GT_BOOL fgtAccessRegs(GT_QD_DEV* dev, HW_DEV_REG_ACCESS *regList);
static GT_BOOL qdMultiAddrAccess(GT_QD_DEV* dev, HW_DEV_REG_ACCESS *regList);
#endif

/*******************************************************************************
* miiSmiIfInit
*
* DESCRIPTION:
*       This function initializes the MII / SMI interface.
*
* INPUTS:
*       None.
*
* OUTPUTS:
*       highSmiDevAddr - Indicates whether to use the high device register
*                     addresses when accessing switch's registers (of all kinds)
*                     i.e, the devices registers range is 0x10 to 0x1F, or to
*                     use the low device register addresses (range 0x0 to 0xF).
*                       GT_TRUE     - use high addresses (0x10 to 0x1F).
*                       GT_FALSE    - use low addresses (0x0 to 0xF).
*
* RETURNS:
*       DEVICE_ID       - on success
*       0    - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_U16 miiSmiIfInit
(
    IN  GT_QD_DEV    *dev,
    OUT GT_BOOL * highSmiDevAddr
)
{
    GT_STATUS status;
    GT_U16 data, data1;

    if((status = miiSmiIfReadRegister(dev,PORT_REGS_START_ADDR,QD_REG_SWITCH_ID,&data)) != GT_OK)
    {
        return 0;
    }

    if((status = miiSmiIfReadRegister(dev,PORT_REGS_START_ADDR+1,QD_REG_SWITCH_ID,&data1)) != GT_OK)
    {
        return 0;
    }

    switch(data & 0xFF00)
    {
        case 0x0200:
        case 0x0300:
        case 0x0500:
        case 0x0600:
        case 0x1500:
        case 0xC000:        /* Melody */
        case 0x0700:        /* Spinnaker */
        case 0x2200:        /* Spinnaker */
        case 0x2500:        /* Spinnaker */
        case 0xF500:
        case 0xF900:
            if (data == data1)
            {
                *highSmiDevAddr = GT_FALSE;
                return data;
            }
            break;
        default:
            break;
    }

    if((status = miiSmiIfReadRegister(dev,PORT_REGS_START_ADDR+0x10,QD_REG_SWITCH_ID,&data)) != GT_OK)
    {
        return 0;
    }

    if((status = miiSmiIfReadRegister(dev,PORT_REGS_START_ADDR+0x11,QD_REG_SWITCH_ID,&data1)) != GT_OK)
    {
        return 0;
    }

    switch(data & 0xFF00)
    {
        case 0x0200:
        case 0x0300:
        case 0x0500:
        case 0x0600:
        case 0x1500:
        case 0xC000:        /* Melody */
        case 0x0700:        /* Spinnaker */
        case 0x2200:        /* Spinnaker */
        case 0x2500:        /* Spinnaker */
        case 0xF500:
        case 0xF900:
            if (data == data1)
            {
                *highSmiDevAddr = GT_TRUE;
                return data;
            }
            break;
        default:
            break;
    }

    if((status = miiSmiIfReadRegister(dev,PORT_REGS_START_ADDR_8PORT,QD_REG_SWITCH_ID,&data)) != GT_OK)
    {
        return 0;
    }

    if((status = miiSmiIfReadRegister(dev,PORT_REGS_START_ADDR_8PORT+1,QD_REG_SWITCH_ID,&data1)) != GT_OK)
    {
        return 0;
    }

    switch(data & 0xFF00)
    {
        case 0x0800:
        case 0x1A00:
        case 0x1000:
        case 0x0900:
        case 0x0400:
        case 0x1200:
        case 0x1400:
        case 0x1600:
        case 0x1700:
        case 0x3200:
        case 0x3700:
        case 0x2400:    /* Agate */
        case 0x3500:    /* Agate */
        case 0x1100:    /* Pearl */
        case 0x3100:    /* Pearl */
            if (data == data1)
            {
                *highSmiDevAddr = GT_FALSE;
                return data;
            }
            break;
        default:
            break;
    }

    return 0;
}


/*******************************************************************************
* miiSmiManualIfInit
*
* DESCRIPTION:
*       This function returns Device ID from the given base address
*
* INPUTS:
*       baseAddr - either 0x0 or 0x10. Indicates whether to use the low device
*                    register address or high device register address.
*                    The device register range is from 0x0 to 0xF or from 0x10
*                    to 0x1F for 5 port switchs and from 0x0 to 0x1B for 8 port
*                    switchs.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       DEVICE_ID       - on success
*       0    - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_U16 miiSmiManualIfInit
(
    IN  GT_QD_DEV   *dev,
    IN  GT_U32        baseAddr
)
{
    GT_STATUS status;
    GT_U16 data;


    if((status = miiSmiIfReadRegister(dev,(GT_U8)(PORT_REGS_START_ADDR+baseAddr),QD_REG_SWITCH_ID,&data)) != GT_OK)
    {
        return 0;
    }

    switch(data & 0xFF00)
    {
        case 0x0200:
        case 0x0300:
        case 0x0500:
        case 0x0600:
        case 0x1500:
        case 0xF500:
        case 0xF900:
        case 0x0700:        /* Spinnaker */
        case 0x2200:        /* Spinnaker */
        case 0x2500:        /* Spinnaker */
            return data;
        case 0xC000:        /* Melody, Now it could be 0xc00 - 0xc07 */
            return data&0xFF0F;
        default:
            break;
    }
    if(baseAddr != 0)
        return 0;

    if((status = miiSmiIfReadRegister(dev,(GT_U8)(PORT_REGS_START_ADDR_8PORT+baseAddr),QD_REG_SWITCH_ID,&data)) != GT_OK)
    {
        return 0;
    }

    switch(data & 0xFF00)
    {
        case 0x0800:
        case 0x1A00:
        case 0x1000:
        case 0x0900:
        case 0x0400:
        case 0x1200:
        case 0x1400:
        case 0x1600:
        case 0x3200:
        case 0x1700:
        case 0x3700:
        case 0x2400:    /* Agate */
        case 0x3500:    /* Agate */
        case 0x1100:    /* Pearl */
        case 0x3100:    /* Pearl */
	case 0xc100:	/* ALP Fix */
            return data;
        default:
            break;
    }

    return 0;
}

/*******************************************************************************
* Following functions are internal APIs between Driver layer and Platform layer
********************************************************************************/

/*******************************************************************************
* miiSmiIfReadRegister
*
* DESCRIPTION:
*       This function reads a register throw the SMI / MII interface, to be used
*       by upper layers.
*
* INPUTS:
*       phyAddr     - The PHY address to be read.
*       regAddr     - The register address to read.
*
* OUTPUTS:
*       data        - The register's data.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS miiSmiIfReadRegister
(
    IN  GT_QD_DEV    *dev,
    IN  GT_U8        phyAddr,
    IN  GT_U8        regAddr,
    OUT GT_U16       *data
)
{
    unsigned int tmpData;

#ifdef GT_RMGMT_ACCESS
    if((dev->accessMode == SMI_MULTI_ADDR_MODE) &&
       (dev->fgtHwAccessMod == HW_ACCESS_MODE_SMI))
#else
    if(dev->accessMode == SMI_MULTI_ADDR_MODE)
#endif
    {
         if(qdMultiAddrRead(dev,(GT_U32)phyAddr,(GT_U32)regAddr,&tmpData) != GT_TRUE)
        {
            return GT_FAIL;
        }
    }
    else
    {
         if(fgtReadMii(dev,(GT_U32)phyAddr,(GT_U32)regAddr,&tmpData) != GT_TRUE)
        {
            return GT_FAIL;
        }
    }
    *data = (GT_U16)tmpData;
    return GT_OK;
}


/*******************************************************************************
* miiSmiIfWriteRegister
*
* DESCRIPTION:
*       This function writes to a register throw the SMI / MII interface, to be
*       used by upper layers.
*
* INPUTS:
*       phyAddr     - The PHY address to be read.
*       regAddr     - The register address to read.
*       data        - The data to be written to the register.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS miiSmiIfWriteRegister
(
    IN  GT_QD_DEV    *dev,
    IN  GT_U8        phyAddr,
    IN  GT_U8        regAddr,
    IN  GT_U16       data
)
{
#ifdef GT_RMGMT_ACCESS
    if((dev->accessMode == SMI_MULTI_ADDR_MODE) &&
       (dev->fgtHwAccessMod == HW_ACCESS_MODE_SMI))
#else
    if(dev->accessMode == SMI_MULTI_ADDR_MODE)
#endif
    {
         if(qdMultiAddrWrite(dev,(GT_U32)phyAddr,(GT_U32)regAddr,(GT_U32)data) != GT_TRUE)
        {
            return GT_FAIL;
        }
    }
    else
    {
        if(fgtWriteMii(dev,(GT_U32)phyAddr,(GT_U32)regAddr,(GT_U32)data) != GT_TRUE)
        {
            return GT_FAIL;
        }
    }
    return GT_OK;
}

#ifdef GT_RMGMT_ACCESS

/*******************************************************************************
* qdAccessRegs
*
* DESCRIPTION:
*       This function access registers through device interface
*        (like Marvell F2R on ethernet) by user, to be used by upper layers.
*
* INPUTS:
*   regList     - list of HW_DEV_RW_REG.
*     HW_DEV_RW_REG includes:
*     cmd - HW_REG_READ, HW_REG_WRITE, HW_REG_WAIT_TILL_0 or HW_REG_WAIT_TILL_1
*     addr - SMI Address
*     reg  - Register offset
*     data - INPUT,OUTPUT:Value in the Register or Bit number
*
* OUTPUTS:
*   regList     - list of HW_DEV_RW_REG.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS qdAccessRegs
(
    IN  GT_QD_DEV    *dev,
    INOUT HW_DEV_REG_ACCESS *regList
)
{
  if((dev->accessMode == SMI_MULTI_ADDR_MODE) &&
     (dev->fgtHwAccessMod == HW_ACCESS_MODE_SMI))
  {
      if(qdMultiAddrAccess(dev, regList) != GT_TRUE)
      {
        return GT_FAIL;
      }
  }
  else
  {
    if ((IS_IN_DEV_GROUP(dev,DEV_RMGMT)) &&
        (dev->fgtHwAccess != NULL) &&
        (dev->fgtHwAccessMod == HW_ACCESS_MODE_F2R) )
    {
      if(dev->fgtHwAccess(dev, regList) != GT_TRUE)
      {
        if(fgtAccessRegs(dev, regList) != GT_TRUE)
        {
          return GT_FAIL;
        }
      }
    }
    else
    {
      if(fgtAccessRegs(dev, regList) != GT_TRUE)
      {
        return GT_FAIL;
      }
    }
  }
  return GT_OK;

}
#endif


/* Local sub-functions */

/*****************************************************************************
* qdMultiAddrRead
*
* DESCRIPTION:
*       This function reads data from a device in the secondary MII bus.
*
* INPUTS:
*       phyAddr     - The PHY address to be read.
*       regAddr     - The register address to read.
*       value       - The storage where register date to be saved.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_TRUE   - on success
*       GT_FALSE  - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_BOOL qdMultiAddrRead (GT_QD_DEV* dev, unsigned int phyAddr , unsigned int regAddr, unsigned int* value)
{
    unsigned int smiReg;
    volatile unsigned int timeOut; /* in 100MS units */
    volatile int i;

    /* first check that it is not busy */
    if(fgtReadMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, &smiReg) != GT_TRUE)
    {
        return GT_FALSE;
    }
    timeOut = QD_SMI_ACCESS_LOOP; /* initialize the loop count */

    if(smiReg & QD_SMI_BUSY)
    {
        for(i = 0 ; i < QD_SMI_TIMEOUT ; i++);
        do
        {
            if(timeOut-- < 1 )
            {
                return GT_FALSE;
            }
            if(fgtReadMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, &smiReg) != GT_TRUE)
            {
                return GT_FALSE;
            }
        } while (smiReg & QD_SMI_BUSY);
    }

    smiReg =  QD_SMI_BUSY | (phyAddr << QD_SMI_DEV_ADDR_BIT) | (QD_SMI_READ << QD_SMI_OP_BIT) |
            (regAddr << QD_SMI_REG_ADDR_BIT) | (QD_SMI_CLAUSE22 << QD_SMI_MODE_BIT);

    if(fgtWriteMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, smiReg) != GT_TRUE)
    {
        return GT_FALSE;
    }
    timeOut = QD_SMI_ACCESS_LOOP; /* initialize the loop count */
    if(fgtReadMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, &smiReg) != GT_TRUE)
    {
        return GT_FALSE;
    }

    if(smiReg & QD_SMI_BUSY)
    {
        for(i = 0 ; i < QD_SMI_TIMEOUT ; i++);
        do
        {
            if(timeOut-- < 1 )
            {
                return GT_FALSE;
            }
            if(fgtReadMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, &smiReg) != GT_TRUE)
            {
                return GT_FALSE;
            }
        } while (smiReg & QD_SMI_BUSY);
    }
    if(fgtReadMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_DATA, &smiReg) != GT_TRUE)
    {
        return GT_FALSE;
    }
    *value = smiReg;

    return GT_TRUE;
}

/*****************************************************************************
* qdMultiAddrWrite
*
* DESCRIPTION:
*       This function writes data to the device in the secondary MII bus.
*
* INPUTS:
*       phyAddr     - The PHY address to be read.
*       regAddr     - The register address to read.
*       value       - The data to be written into the register.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_TRUE   - on success
*       GT_FALSE  - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/

GT_BOOL qdMultiAddrWrite (GT_QD_DEV* dev, unsigned int phyAddr , unsigned int regAddr, unsigned int value)
{
    unsigned int smiReg;
    volatile unsigned int timeOut; /* in 100MS units */
    volatile int i;

    /* first check that it is not busy */
    if(fgtReadMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, &smiReg) != GT_TRUE)
    {
        return GT_FALSE;
    }
    timeOut = QD_SMI_ACCESS_LOOP; /* initialize the loop count */

    if(smiReg & QD_SMI_BUSY)
    {
        for(i = 0 ; i < QD_SMI_TIMEOUT ; i++);
        do
        {
            if(timeOut-- < 1 )
            {
                return GT_FALSE;
            }
            if(fgtReadMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, &smiReg) != GT_TRUE)
            {
                return GT_FALSE;
            }
        } while (smiReg & QD_SMI_BUSY);
    }

    if(fgtWriteMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_DATA, value) != GT_TRUE)
    {
        return GT_FALSE;
    }
    smiReg = QD_SMI_BUSY | (phyAddr << QD_SMI_DEV_ADDR_BIT) | (QD_SMI_WRITE << QD_SMI_OP_BIT) |
            (regAddr << QD_SMI_REG_ADDR_BIT) | (QD_SMI_CLAUSE22 << QD_SMI_MODE_BIT);

    if(fgtWriteMii(dev,(GT_U32)dev->phyAddr,(GT_U32)QD_REG_SMI_COMMAND, smiReg) != GT_TRUE)
    {
        return GT_FALSE;
    }

    return GT_TRUE;
}


static GT_BOOL fgtReadMii(GT_QD_DEV*dev, unsigned int phyAddr, unsigned int reg, unsigned int* value)
{
  GT_BOOL retVal;
  retVal =  dev->fgtReadMii(dev, phyAddr, reg, value);
  return  retVal;
}


static GT_BOOL fgtWriteMii(GT_QD_DEV*dev, unsigned int phyAddr, unsigned int reg, unsigned int value)
{
  GT_BOOL retVal;
  retVal = dev->fgtWriteMii(dev, phyAddr, reg, value);
  return  retVal;
}

#ifdef GT_RMGMT_ACCESS

static GT_BOOL fgtAccessRegs(GT_QD_DEV* dev, HW_DEV_REG_ACCESS *regList)
{
  int i;
  GT_BOOL retVal = GT_TRUE;
  unsigned short data, mask;
  unsigned int tmpData;
  for (i=0; i<regList->entries; i++)
  {
    switch (regList->rw_reg_list[i].cmd)
    {
      case HW_REG_READ:
        retVal=dev->fgtReadMii(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, (unsigned int *)&(regList->rw_reg_list[i].data));
        break;
      case HW_REG_WRITE:
        retVal=dev->fgtWriteMii(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, regList->rw_reg_list[i].data);
        break;
      case HW_REG_WAIT_TILL_0:
      {
        mask = (1<<regList->rw_reg_list[i].data);
        do
        {
          retVal=dev->fgtReadMii(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, (unsigned int *)&tmpData);
          if(retVal != GT_TRUE)
          {
            return retVal;
          }
          data = tmpData;
        } while(data & mask);
      }
        break;
      case HW_REG_WAIT_TILL_1:
      {
        mask = (1<<regList->rw_reg_list[i].data);
        do
        {
          retVal=dev->fgtReadMii(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, (unsigned int *)&tmpData);
          if(retVal != GT_TRUE)
          {
            return retVal;
          }
          data = tmpData;
        } while(!(data & mask));
      }
        break;

      default:
        return GT_FALSE;
    }
  }
    return retVal;
}

GT_BOOL qdAccessMultiAddrRead (GT_QD_DEV* dev, unsigned int phyAddr , unsigned int regAddr, unsigned int* value)
{
  GT_U16 smiReg;

  HW_DEV_REG_ACCESS regAccess;

  regAccess.entries = 4;

  regAccess.rw_reg_list[0].cmd = HW_REG_WAIT_TILL_0;
  regAccess.rw_reg_list[0].addr = (GT_U32)dev->phyAddr;
  regAccess.rw_reg_list[0].reg = QD_REG_SMI_COMMAND;
  regAccess.rw_reg_list[0].data = 15;
  smiReg =  QD_SMI_BUSY | (phyAddr << QD_SMI_DEV_ADDR_BIT) | (QD_SMI_READ << QD_SMI_OP_BIT) | (regAddr << QD_SMI_REG_ADDR_BIT) | (QD_SMI_CLAUSE22 << QD_SMI_MODE_BIT);

  regAccess.rw_reg_list[1].cmd = HW_REG_WRITE;
  regAccess.rw_reg_list[1].addr = (GT_U32)dev->phyAddr;
  regAccess.rw_reg_list[1].reg = QD_REG_SMI_COMMAND;
  regAccess.rw_reg_list[1].data = smiReg;

  regAccess.rw_reg_list[2].cmd = HW_REG_WAIT_TILL_0;
  regAccess.rw_reg_list[2].addr = (GT_U32)dev->phyAddr;
  regAccess.rw_reg_list[2].reg = QD_REG_SMI_COMMAND;
  regAccess.rw_reg_list[2].data = 15;

  regAccess.rw_reg_list[3].cmd = HW_REG_READ;
  regAccess.rw_reg_list[3].addr = (GT_U32)dev->phyAddr;
  regAccess.rw_reg_list[3].reg = QD_REG_SMI_DATA;
  regAccess.rw_reg_list[3].data = 0;
  if(dev->fgtHwAccess(dev, &regAccess) != GT_TRUE)
  {
    return GT_FALSE;
  }
  *value = (unsigned short)regAccess.rw_reg_list[3].data;

  return GT_TRUE;
}
GT_BOOL qdAccessMultiAddrWrite (GT_QD_DEV* dev, unsigned int phyAddr , unsigned int regAddr, unsigned int value)
{
  GT_U16 smiReg;

  HW_DEV_REG_ACCESS regAccess;

  regAccess.entries = 3;

  regAccess.rw_reg_list[0].cmd = HW_REG_WAIT_TILL_0;
  regAccess.rw_reg_list[0].addr = (GT_U32)dev->phyAddr;
  regAccess.rw_reg_list[0].reg = QD_REG_SMI_COMMAND;
  regAccess.rw_reg_list[0].data = 15;

  regAccess.rw_reg_list[1].cmd = HW_REG_WRITE;
  regAccess.rw_reg_list[1].addr = (GT_U32)dev->phyAddr;
  regAccess.rw_reg_list[1].reg = QD_REG_SMI_DATA;
  regAccess.rw_reg_list[1].data = value;

  smiReg = QD_SMI_BUSY | (phyAddr << QD_SMI_DEV_ADDR_BIT) | (QD_SMI_WRITE << QD_SMI_OP_BIT) | (regAddr << QD_SMI_REG_ADDR_BIT) | (QD_SMI_CLAUSE22 << QD_SMI_MODE_BIT);

  regAccess.rw_reg_list[2].cmd = HW_REG_WRITE;
  regAccess.rw_reg_list[2].addr = (GT_U32)dev->phyAddr;
  regAccess.rw_reg_list[2].reg = QD_REG_SMI_COMMAND;
  regAccess.rw_reg_list[2].data = smiReg;

  if(dev->fgtHwAccess(dev, &regAccess) != GT_TRUE)
  {
    return GT_FALSE;
  }

  return GT_TRUE;
}

/*****************************************************************************
* qdMultiAddrAccess
*
* DESCRIPTION:
*       This function access data to the device in the secondary MII bus.
*
* INPUTS:
*   regList     - list of HW_DEV_RW_REG.
*     HW_DEV_RW_REG includes:
*     cmd - HW_REG_READ, HW_REG_WRITE, HW_REG_WAIT_TILL_0 or HW_REG_WAIT_TILL_1
*     addr - SMI Address
*     reg  - Register offset
*     data - INPUT,OUTPUT:Value in the Register or Bit number
*
* OUTPUTS:
*   regList     - list of HW_DEV_RW_REG.
*
* RETURNS:
*       GT_TRUE   - on success
*       GT_FALSE  - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/

static GT_BOOL qdMultiAddrAccess(GT_QD_DEV* dev, HW_DEV_REG_ACCESS *regList)
{
  int i;
  GT_BOOL retVal = GT_TRUE;
  unsigned short data, mask;
  unsigned int tmpData;

  for (i=0; i<regList->entries; i++)
  {
    switch (regList->rw_reg_list[i].cmd)
    {
      case HW_REG_READ:
        retVal=qdAccessMultiAddrRead(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, (unsigned int *)&(regList->rw_reg_list[i].data));
        break;
      case HW_REG_WRITE:
        retVal=qdAccessMultiAddrWrite(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, regList->rw_reg_list[i].data);
        break;
      case HW_REG_WAIT_TILL_0:
      {
        mask = (1<<regList->rw_reg_list[i].data);
        do
        {
          retVal=qdAccessMultiAddrRead(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, (unsigned int *)&tmpData);
          if(retVal != GT_TRUE)
          {
            return retVal;
          }
          data = tmpData;
        } while(data & mask);
      }
        break;
      case HW_REG_WAIT_TILL_1:
      {
        mask = (1<<regList->rw_reg_list[i].data);
        do
        {
          retVal=qdAccessMultiAddrRead(dev, regList->rw_reg_list[i].addr,
                regList->rw_reg_list[i].reg, (unsigned int *)&tmpData);
          if(retVal != GT_TRUE)
          {
            return retVal;
          }
          data = tmpData;
        } while(!(data & mask));
      }
        break;

      default:
        return GT_FALSE;
    }
  }
    return retVal;
}

#endif