blob: fb351995c72e0631168a0b56d7a1004208db1261 [file] [log] [blame]
/* termios type and macro definitions. Linux/MIPS version.
Copyright (C) 1993, 94, 95, 96, 97, 99 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA. */
#ifndef _TERMIOS_H
# error "Never include <bits/termios.h> directly; use <termios.h> instead."
#endif
typedef unsigned char cc_t;
typedef unsigned int speed_t;
typedef unsigned int tcflag_t;
#define NCCS 32
struct termios
{
tcflag_t c_iflag; /* input mode flags */
tcflag_t c_oflag; /* output mode flags */
tcflag_t c_cflag; /* control mode flags */
tcflag_t c_lflag; /* local mode flags */
cc_t c_line; /* line discipline */
cc_t c_cc[NCCS]; /* control characters */
};
/* c_cc characters */
#define VINTR 0 /* Interrupt character [ISIG]. */
#define VQUIT 1 /* Quit character [ISIG]. */
#define VERASE 2 /* Erase character [ICANON]. */
#define VKILL 3 /* Kill-line character [ICANON]. */
#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */
#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */
#define VEOL2 6 /* Second EOL character [ICANON]. */
#define VSWTC 7
#define VSWTCH VSWTC
#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */
#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */
#define VSUSP 10 /* Suspend character [ISIG]. */
/* VDSUSP is not supported on Linux. */
/* #define VDSUSP 11 / * Delayed suspend character [ISIG]. */
#define VREPRINT 12 /* Reprint-line character [ICANON]. */
#define VDISCARD 13 /* Discard character [IEXTEN]. */
#define VWERASE 14 /* Word-erase character [ICANON]. */
#define VLNEXT 15 /* Literal-next character [IEXTEN]. */
#define VEOF 16 /* End-of-file character [ICANON]. */
#define VEOL 17 /* End-of-line character [ICANON]. */
/* c_iflag bits */
#define IGNBRK 0000001 /* Ignore break condition. */
#define BRKINT 0000002 /* Signal interrupt on break. */
#define IGNPAR 0000004 /* Ignore characters with parity errors. */
#define PARMRK 0000010 /* Mark parity and framing errors. */
#define INPCK 0000020 /* Enable input parity check. */
#define ISTRIP 0000040 /* Strip 8th bit off characters. */
#define INLCR 0000100 /* Map NL to CR on input. */
#define IGNCR 0000200 /* Ignore CR. */
#define ICRNL 0000400 /* Map CR to NL on input. */
#define IUCLC 0001000 /* Map upper case to lower case on input. */
#define IXON 0002000 /* Enable start/stop output control. */
#define IXANY 0004000 /* Any character will restart after stop. */
#define IXOFF 0010000 /* Enable start/stop input control. */
#define IMAXBEL 0020000 /* Ring bell when input queue is full. */
#define IUTF8 0040000 /* Input is UTF8. */
/* c_oflag bits */
#define OPOST 0000001 /* Perform output processing. */
#define OLCUC 0000002 /* Map lower case to upper case on output. */
#define ONLCR 0000004 /* Map NL to CR-NL on output. */
#define OCRNL 0000010
#define ONOCR 0000020
#define ONLRET 0000040
#define OFILL 0000100
#define OFDEL 0000200
#if defined __USE_MISC || defined __USE_XOPEN
# define NLDLY 0000400
# define NL0 0000000
# define NL1 0000400
# define CRDLY 0003000
# define CR0 0000000
# define CR1 0001000
# define CR2 0002000
# define CR3 0003000
# define TABDLY 0014000
# define TAB0 0000000
# define TAB1 0004000
# define TAB2 0010000
# define TAB3 0014000
# define BSDLY 0020000
# define BS0 0000000
# define BS1 0020000
# define FFDLY 0100000
# define FF0 0000000
# define FF1 0100000
#endif
#define VTDLY 0040000
#define VT0 0000000
#define VT1 0040000
#ifdef __USE_MISC
# define XTABS 0014000
#endif
/* c_cflag bit meaning */
#ifdef __USE_MISC
# define CBAUD 0010017
#endif
#define B0 0000000 /* hang up */
#define B50 0000001
#define B75 0000002
#define B110 0000003
#define B134 0000004
#define B150 0000005
#define B200 0000006
#define B300 0000007
#define B600 0000010
#define B1200 0000011
#define B1800 0000012
#define B2400 0000013
#define B4800 0000014
#define B9600 0000015
#define B19200 0000016
#define B38400 0000017
#ifdef __USE_MISC
# define EXTA B19200
# define EXTB B38400
#endif
#define CSIZE 0000060 /* Number of bits per byte (mask). */
#define CS5 0000000 /* 5 bits per byte. */
#define CS6 0000020 /* 6 bits per byte. */
#define CS7 0000040 /* 7 bits per byte. */
#define CS8 0000060 /* 8 bits per byte. */
#define CSTOPB 0000100 /* Two stop bits instead of one. */
#define CREAD 0000200 /* Enable receiver. */
#define PARENB 0000400 /* Parity enable. */
#define PARODD 0001000 /* Odd parity instead of even. */
#define HUPCL 0002000 /* Hang up on last close. */
#define CLOCAL 0004000 /* Ignore modem status lines. */
#ifdef __USE_MISC
# define CBAUDEX 0010000
#endif
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
#define B460800 0010004
#define B500000 0010005
#define B576000 0010006
#define B921600 0010007
#define B1000000 0010010
#define B1152000 0010011
#define B1500000 0010012
#define B2000000 0010013
#define B2500000 0010014
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
#define __MAX_BAUD B4000000
#ifdef __USE_MISC
# define CIBAUD 002003600000 /* input baud rate (not used) */
# define CRTSCTS 020000000000 /* flow control */
#endif
/* c_lflag bits */
#define ISIG 0000001 /* Enable signals. */
#define ICANON 0000002 /* Do erase and kill processing. */
#if defined __USE_MISC || defined __USE_XOPEN
# define XCASE 0000004
#endif
#define ECHO 0000010 /* Enable echo. */
#define ECHOE 0000020 /* Visual erase for ERASE. */
#define ECHOK 0000040 /* Echo NL after KILL. */
#define ECHONL 0000100 /* Echo NL even if ECHO is off. */
#define NOFLSH 0000200 /* Disable flush after interrupt. */
#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */
#ifdef __USE_MISC
# define ECHOCTL 0001000 /* Echo control characters as ^X. */
# define ECHOPRT 0002000 /* Hardcopy visual erase. */
# define ECHOKE 0004000 /* Visual erase for KILL. */
# define FLUSHO 0020000
# define PENDIN 0040000 /* Retype pending input (state). */
#endif
#define TOSTOP 0100000 /* Send SIGTTOU for background output. */
#define ITOSTOP TOSTOP
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
/* tcflow() and TCXONC use these */
#define TCOOFF 0 /* Suspend output. */
#define TCOON 1 /* Restart suspended output. */
#define TCIOFF 2 /* Send a STOP character. */
#define TCION 3 /* Send a START character. */
/* tcflush() and TCFLSH use these */
#define TCIFLUSH 0 /* Discard data received but not yet read. */
#define TCOFLUSH 1 /* Discard data written but not yet sent. */
#define TCIOFLUSH 2 /* Discard all pending data. */
/* tcsetattr uses these */
#define TCSANOW 0x540e /* Same as TCSETS; change immediately. */
#define TCSADRAIN 0x540f /* Same as TCSETSW; change when pending output is written. */
#define TCSAFLUSH 0x5410 /* Same as TCSETSF; flush pending input before changing. */
#define _IOT_termios /* Hurd ioctl type field. */ \
_IOT (_IOTS (cflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2)