| /* Script for ld -Ur: link w/out relocation, do create constructors */ |
| OUTPUT_FORMAT("elf32-ntradbigmips", "elf32-ntradbigmips", |
| "elf32-ntradlittlemips") |
| OUTPUT_ARCH(mips) |
| /* For some reason, the Solaris linker makes bad executables |
| if gld -r is used and the intermediate file has sections starting |
| at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld |
| bug. But for now assigning the zero vmas works. */ |
| SECTIONS |
| { |
| /* Read-only sections, merged into text segment: */ |
| .interp 0 : { *(.interp) } |
| .reginfo 0 : { *(.reginfo) } |
| .note.gnu.build-id : { *(.note.gnu.build-id) } |
| .dynamic 0 : { *(.dynamic) } |
| .hash 0 : { *(.hash) } |
| .gnu.hash 0 : { *(.gnu.hash) } |
| .dynsym 0 : { *(.dynsym) } |
| .dynstr 0 : { *(.dynstr) } |
| .gnu.version 0 : { *(.gnu.version) } |
| .gnu.version_d 0: { *(.gnu.version_d) } |
| .gnu.version_r 0: { *(.gnu.version_r) } |
| .rel.init 0 : { *(.rel.init) } |
| .rela.init 0 : { *(.rela.init) } |
| .rel.text 0 : { *(.rel.text) } |
| .rela.text 0 : { *(.rela.text) } |
| .rel.fini 0 : { *(.rel.fini) } |
| .rela.fini 0 : { *(.rela.fini) } |
| .rel.rodata 0 : { *(.rel.rodata) } |
| .rela.rodata 0 : { *(.rela.rodata) } |
| .rel.data.rel.ro 0 : { *(.rel.data.rel.ro) } |
| .rela.data.rel.ro 0 : { *(.rela.data.rel.ro) } |
| .rel.data 0 : { *(.rel.data) } |
| .rela.data 0 : { *(.rela.data) } |
| .rel.tdata 0 : { *(.rel.tdata) } |
| .rela.tdata 0 : { *(.rela.tdata) } |
| .rel.tbss 0 : { *(.rel.tbss) } |
| .rela.tbss 0 : { *(.rela.tbss) } |
| .rel.ctors 0 : { *(.rel.ctors) } |
| .rela.ctors 0 : { *(.rela.ctors) } |
| .rel.dtors 0 : { *(.rel.dtors) } |
| .rela.dtors 0 : { *(.rela.dtors) } |
| .rel.got 0 : { *(.rel.got) } |
| .rela.got 0 : { *(.rela.got) } |
| .rel.dyn 0 : { *(.rel.dyn) } |
| .rel.sdata 0 : { *(.rel.sdata) } |
| .rela.sdata 0 : { *(.rela.sdata) } |
| .rel.sbss 0 : { *(.rel.sbss) } |
| .rela.sbss 0 : { *(.rela.sbss) } |
| .rel.sdata2 0 : { *(.rel.sdata2) } |
| .rela.sdata2 0 : { *(.rela.sdata2) } |
| .rel.sbss2 0 : { *(.rel.sbss2) } |
| .rela.sbss2 0 : { *(.rela.sbss2) } |
| .rel.bss 0 : { *(.rel.bss) } |
| .rela.bss 0 : { *(.rela.bss) } |
| .rel.iplt 0 : |
| { |
| *(.rel.iplt) |
| } |
| .rela.iplt 0 : |
| { |
| *(.rela.iplt) |
| } |
| .rel.plt 0 : |
| { |
| *(.rel.plt) |
| } |
| .rela.plt 0 : |
| { |
| *(.rela.plt) |
| } |
| .init 0 : |
| { |
| KEEP (*(SORT_NONE(.init))) |
| } |
| .plt 0 : { *(.plt) } |
| .iplt 0 : { *(.iplt) } |
| .text 0 : |
| { |
| *(.text .stub) |
| /* .gnu.warning sections are handled specially by elf32.em. */ |
| *(.gnu.warning) |
| } |
| .fini 0 : |
| { |
| KEEP (*(SORT_NONE(.fini))) |
| } |
| .rodata 0 : { *(.rodata) } |
| .rodata1 0 : { *(.rodata1) } |
| .sdata2 0 : |
| { |
| *(.sdata2) |
| } |
| .sbss2 0 : { *(.sbss2) } |
| .eh_frame_hdr : { *(.eh_frame_hdr) } |
| .eh_frame 0 : ONLY_IF_RO { KEEP (*(.eh_frame)) } |
| .gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table |
| .gcc_except_table.*) } |
| /* These sections are generated by the Sun/Oracle C++ compiler. */ |
| .exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges |
| .exception_ranges*) } |
| /* Adjust the address for the data segment. We want to adjust up to |
| the same address within the page on the next page up. */ |
| /* Exception handling */ |
| .eh_frame 0 : ONLY_IF_RW { KEEP (*(.eh_frame)) } |
| .gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } |
| .exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) } |
| /* Thread Local Storage sections */ |
| .tdata 0 : { *(.tdata) } |
| .tbss 0 : { *(.tbss) } |
| .preinit_array 0 : |
| { |
| KEEP (*(.preinit_array)) |
| } |
| .jcr 0 : { KEEP (*(.jcr)) } |
| .data 0 : |
| { |
| *(.data) |
| SORT(CONSTRUCTORS) |
| } |
| .data1 0 : { *(.data1) } |
| .got.plt 0 : { *(.got.plt) } |
| .got 0 : { *(.got) } |
| /* We want the small data sections together, so single-instruction offsets |
| can access them all, and initialized data all before uninitialized, so |
| we can shorten the on-disk segment size. */ |
| .sdata 0 : |
| { |
| *(.sdata) |
| } |
| .lit8 0 : { *(.lit8) } |
| .lit4 0 : { *(.lit4) } |
| .srdata 0 : { *(.srdata) } |
| .sbss 0 : |
| { |
| *(.dynsbss) |
| *(.sbss) |
| *(.scommon) |
| } |
| .bss 0 : |
| { |
| *(.dynbss) |
| *(.bss) |
| *(COMMON) |
| /* Align here to ensure that the .bss section occupies space up to |
| _end. Align after .bss to ensure correct alignment even if the |
| .bss section disappears because there are no input sections. |
| FIXME: Why do we need it? When there is no .bss section, we don't |
| pad the .data section. */ |
| } |
| /* Stabs debugging sections. */ |
| .stab 0 : { *(.stab) } |
| .stabstr 0 : { *(.stabstr) } |
| .stab.excl 0 : { *(.stab.excl) } |
| .stab.exclstr 0 : { *(.stab.exclstr) } |
| .stab.index 0 : { *(.stab.index) } |
| .stab.indexstr 0 : { *(.stab.indexstr) } |
| .comment 0 : { *(.comment) } |
| /* DWARF debug sections. |
| Symbols in the DWARF debugging sections are relative to the beginning |
| of the section so we begin them at 0. */ |
| /* DWARF 1 */ |
| .debug 0 : { *(.debug) } |
| .line 0 : { *(.line) } |
| /* GNU DWARF 1 extensions */ |
| .debug_srcinfo 0 : { *(.debug_srcinfo) } |
| .debug_sfnames 0 : { *(.debug_sfnames) } |
| /* DWARF 1.1 and DWARF 2 */ |
| .debug_aranges 0 : { *(.debug_aranges) } |
| .debug_pubnames 0 : { *(.debug_pubnames) } |
| /* DWARF 2 */ |
| .debug_info 0 : { *(.debug_info) } |
| .debug_abbrev 0 : { *(.debug_abbrev) } |
| .debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) } |
| .debug_frame 0 : { *(.debug_frame) } |
| .debug_str 0 : { *(.debug_str) } |
| .debug_loc 0 : { *(.debug_loc) } |
| .debug_macinfo 0 : { *(.debug_macinfo) } |
| /* SGI/MIPS DWARF 2 extensions */ |
| .debug_weaknames 0 : { *(.debug_weaknames) } |
| .debug_funcnames 0 : { *(.debug_funcnames) } |
| .debug_typenames 0 : { *(.debug_typenames) } |
| .debug_varnames 0 : { *(.debug_varnames) } |
| /* DWARF 3 */ |
| .debug_pubtypes 0 : { *(.debug_pubtypes) } |
| .debug_ranges 0 : { *(.debug_ranges) } |
| /* DWARF Extension. */ |
| .debug_macro 0 : { *(.debug_macro) } |
| .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) } |
| .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } |
| .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } |
| } |