blob: 8c78066c5daf6cb6b2ff9a4128d3439d468dc20e [file] [log] [blame]
/* Script for ld -r: link without relocation */
OUTPUT_FORMAT("elf64-tradlittlemips", "elf64-tradbigmips",
"elf64-tradlittlemips")
OUTPUT_ARCH(mips)
/* For some reason, the Solaris linker makes bad executables
if gld -r is used and the intermediate file has sections starting
at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
bug. But for now assigning the zero vmas works. */
SECTIONS
{
/* Read-only sections, merged into text segment: */
.MIPS.options : { *(.MIPS.options) }
.note.gnu.build-id : { *(.note.gnu.build-id) }
.dynamic 0 : { *(.dynamic) }
.hash 0 : { *(.hash) }
.gnu.hash 0 : { *(.gnu.hash) }
.dynsym 0 : { *(.dynsym) }
.dynstr 0 : { *(.dynstr) }
.gnu.version 0 : { *(.gnu.version) }
.gnu.version_d 0: { *(.gnu.version_d) }
.gnu.version_r 0: { *(.gnu.version_r) }
.rel.init 0 : { *(.rel.init) }
.rela.init 0 : { *(.rela.init) }
.rel.text 0 : { *(.rel.text) }
.rela.text 0 : { *(.rela.text) }
.rel.fini 0 : { *(.rel.fini) }
.rela.fini 0 : { *(.rela.fini) }
.rel.rodata 0 : { *(.rel.rodata) }
.rela.rodata 0 : { *(.rela.rodata) }
.rel.data.rel.ro 0 : { *(.rel.data.rel.ro) }
.rela.data.rel.ro 0 : { *(.rela.data.rel.ro) }
.rel.data 0 : { *(.rel.data) }
.rela.data 0 : { *(.rela.data) }
.rel.tdata 0 : { *(.rel.tdata) }
.rela.tdata 0 : { *(.rela.tdata) }
.rel.tbss 0 : { *(.rel.tbss) }
.rela.tbss 0 : { *(.rela.tbss) }
.rel.ctors 0 : { *(.rel.ctors) }
.rela.ctors 0 : { *(.rela.ctors) }
.rel.dtors 0 : { *(.rel.dtors) }
.rela.dtors 0 : { *(.rela.dtors) }
.rel.got 0 : { *(.rel.got) }
.rela.got 0 : { *(.rela.got) }
.rel.dyn 0 : { *(.rel.dyn) }
.rel.sdata 0 : { *(.rel.sdata) }
.rela.sdata 0 : { *(.rela.sdata) }
.rel.sbss 0 : { *(.rel.sbss) }
.rela.sbss 0 : { *(.rela.sbss) }
.rel.sdata2 0 : { *(.rel.sdata2) }
.rela.sdata2 0 : { *(.rela.sdata2) }
.rel.sbss2 0 : { *(.rel.sbss2) }
.rela.sbss2 0 : { *(.rela.sbss2) }
.rel.bss 0 : { *(.rel.bss) }
.rela.bss 0 : { *(.rela.bss) }
.rel.iplt 0 :
{
*(.rel.iplt)
}
.rela.iplt 0 :
{
*(.rela.iplt)
}
.rel.plt 0 :
{
*(.rel.plt)
}
.rela.plt 0 :
{
*(.rela.plt)
}
.init 0 :
{
KEEP (*(SORT_NONE(.init)))
}
.plt 0 : { *(.plt) }
.iplt 0 : { *(.iplt) }
.text 0 :
{
*(.text .stub)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
}
.fini 0 :
{
KEEP (*(SORT_NONE(.fini)))
}
.rodata 0 : { *(.rodata) }
.rodata1 0 : { *(.rodata1) }
.sdata2 0 :
{
*(.sdata2)
}
.sbss2 0 : { *(.sbss2) }
.eh_frame_hdr : { *(.eh_frame_hdr) }
.eh_frame 0 : ONLY_IF_RO { KEEP (*(.eh_frame)) }
.gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table
.gcc_except_table.*) }
/* These sections are generated by the Sun/Oracle C++ compiler. */
.exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges
.exception_ranges*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
/* Exception handling */
.eh_frame 0 : ONLY_IF_RW { KEEP (*(.eh_frame)) }
.gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
.exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
/* Thread Local Storage sections */
.tdata 0 : { *(.tdata) }
.tbss 0 : { *(.tbss) }
.preinit_array 0 :
{
KEEP (*(.preinit_array))
}
.jcr 0 : { KEEP (*(.jcr)) }
.data 0 :
{
*(.data)
}
.data1 0 : { *(.data1) }
.got.plt 0 : { *(.got.plt) }
.got 0 : { *(.got) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata 0 :
{
*(.sdata)
}
.lit8 0 : { *(.lit8) }
.lit4 0 : { *(.lit4) }
.srdata 0 : { *(.srdata) }
.sbss 0 :
{
*(.dynsbss)
*(.sbss)
*(.scommon)
}
.bss 0 :
{
*(.dynbss)
*(.bss)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections.
FIXME: Why do we need it? When there is no .bss section, we don't
pad the .data section. */
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/* DWARF 3 */
.debug_pubtypes 0 : { *(.debug_pubtypes) }
.debug_ranges 0 : { *(.debug_ranges) }
/* DWARF Extension. */
.debug_macro 0 : { *(.debug_macro) }
.gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
}