share/insight1.0/util.tcl

# Utilities for Insight.
# Copyright (C) 1997, 1998, 1999, 2004 Red Hat
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License (GPL) as published by
# the Free Software Foundation; either version 2 of the License, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.


# ----------------------------------------------------------------------
# Misc routines
#
#   PROCS:
#
#     keep_raised - keep a window raised
#     sleep - wait a certain number of seconds and return
#     toggle_debug_mode - turn debugging on and off
#     freeze - make a window modal
#     bp_exists - does a breakpoint exist on linespec?
#
# ----------------------------------------------------------------------
#


# A helper procedure to keep a window on top.
proc keep_raised {top} {
  if {[winfo exists $top]} {
    raise $top
    wm deiconify $top
    after 1000 [info level 0]
  }
}

# sleep - wait a certain number of seconds then return
proc sleep {sec} {
  global __sleep_timer
  set __sleep_timer 0
  after [expr {1000 * $sec}] set __sleep_timer 1
  vwait __sleep_timer
}


# ------------------------------------------------------------------
#  PROC:  auto_step - automatically step through a program
# ------------------------------------------------------------------

# FIXME FIXME
proc auto_step {} {
  global auto_step_id

  set auto_step_id [after 2000 auto_step]
  gdb_cmd next
}

# ------------------------------------------------------------------
#  PROC:  auto_step_cancel - cancel auto-stepping
# ------------------------------------------------------------------

proc auto_step_cancel {} {
  global auto_step_id

  if {[info exists auto_step_id]} {
    after cancel $auto_step_id
    unset auto_step_id
  }
}

# ------------------------------------------------------------------
#  PROC:  tfind_cmd -- to execute a tfind command on the target
# ------------------------------------------------------------------
proc tfind_cmd {command} {
  gdbtk_busy
  # need to call gdb_cmd because we want to ignore the output
  set err [catch {gdb_cmd $command} msg]
  if {$err || [regexp "Target failed to find requested trace frame" $msg]} {
    tk_messageBox -icon error -title "GDB" -type ok \
      -message $msg
    gdbtk_idle
    return
  } else {
    gdbtk_update
    gdbtk_idle
  }
}

# ------------------------------------------------------------------
#  PROC:  save_trace_command -- Saves the current trace settings to a file
# ------------------------------------------------------------------
proc save_trace_commands {} {
  
  set out_file [tk_getSaveFile -title "Enter output file for trace commands"]
  debug "Got outfile: $out_file"
  if {$out_file != ""} {
    gdb_cmd "save-tracepoints $out_file"
  }
}

# ------------------------------------------------------------------
#  PROC:  do_test - invoke the test passed in
#           This proc is provided for convenience. For any test
#           that uses the console window (like the console window
#           tests), the file cannot be sourced directly using the
#           'tk' command because it will block the console window
#           until the file is done executing. This proc assures
#           that the console window is free for input by wrapping
#           the source call in an after callback.
#           Users may also pass in the verbose and tests globals
#           used by the testsuite.
# ------------------------------------------------------------------
proc do_test {{file {}} {verbose {}} {tests {}}} {
  global _test

  if {$file == {}} {
    error "wrong \# args: should be: do_test file ?verbose? ?tests ...?"
  }

  if {$verbose != {}} {
    set _test(verbose) $verbose
  } elseif {![info exists _test(verbose)]} {
    set _test(verbose) 0
  }

  if {$tests != {}} {
    set _test(tests) $tests
  }

  set _test(interactive) 1
  after 500 [list source $file]
}

# ------------------------------------------------------------------
#  PROCEDURE:  gdbtk_read_defs
#        Reads in the defs file for the testsuite. This is usually
#        the first procedure called by a test file. It returns
#        1 if it was successful and 0 if not (if run interactively
#        from the console window) or exits (if running via dejagnu).
# ------------------------------------------------------------------
proc gdbtk_read_defs {} {
  global _test env

  if {[info exists env(DEFS)]} {
    set err [catch {source $env(DEFS)} errTxt]
  } else {
    set err [catch {source defs} errTxt]
  }

  if {$err} {
    if {$_test(interactive)} {
      tk_messageBox -icon error -message "Cannot load defs file:\n$errTxt" -type ok
      return 0
    } else {
      puts stderr "cannot load defs files: $errTxt\ntry setting DEFS"
      exit 1
    }
  }

  return 1
}

# ------------------------------------------------------------------
#  PROCEDURE:  bp_exists
#            Returns BPNUM if a breakpoint exists at LINESPEC or
#            -1 if no breakpoint exists there
# ------------------------------------------------------------------
proc bp_exists {linespec} {

  lassign $linespec foo function filename line_number addr pc_addr

  set bps [gdb_get_breakpoint_list]
  foreach bpnum $bps {
    set bpinfo [gdb_get_breakpoint_info $bpnum]
    lassign $bpinfo file func line pc type enabled disposition \
      ignore_count commands cond thread hit_count user_specification
    if {$filename == $file && $function == $func && $addr == $pc} {
      return $bpnum
    }
  }

  return -1
}


# gridCGet - This provides the missing grid cget
# command.

proc gridCGet {slave option} {
  set config_list [grid info $slave]
  return [lindex $config_list [expr [lsearch $config_list $option] + 1]] 
}

# ------------------------------------------------------------------
#  PROC:  get_disassembly_flavor - gets the current disassembly flavor.
#         The set disassembly-flavor command is assumed to exist.  This
#         will error out if it does not.
# ------------------------------------------------------------------
proc get_disassembly_flavor {} {
  if {[catch {gdb_cmd "show disassembly-flavor"} ret]} {
    return ""
  } else {
    regexp {\"([^\"]*)\"\.} $ret dummy gdb_val
    return $gdb_val
  }
}
 
# ------------------------------------------------------------------
#  PROC:  list_disassembly_flavors - Lists the current disassembly flavors.
#         Returns an empty list if the set disassembly-flavor is not supported.
# ------------------------------------------------------------------
proc list_disassembly_flavors {} {
  catch {gdb_cmd "set disassembly-flavor"} ret_val
  if {[regexp {Requires an argument\. Valid arguments are (.*)\.} \
	 $ret_val dummy list]} {
    foreach elem  [split $list ","] {
      lappend vals [string trim $elem]
    }
    return [lsort $vals]
  } else {
    return {}
  }    
}

# ------------------------------------------------------------------
#  PROC:  init_disassembly_flavor - Synchs up gdb's internal disassembly
#         flavor with the value in the preferences file.
# ------------------------------------------------------------------
proc init_disassembly_flavor {} { 
  set gdb_val [get_disassembly_flavor]
  if {$gdb_val != ""} {
    set def_val [pref get gdb/src/disassembly-flavor]
    if {[string compare $def_val ""] != 0} {
      if {[catch "gdb_cmd \"set disassembly-flavor $def_val\""]} {
	pref set gdb/src/disassembly-flavor $gdb_val
      }
    } else {
      pref set gdb/src/disassembly-flavor $gdb_val
    }
  }
}

# ------------------------------------------------------------------
#  PROC:  list_element_strcmp - to be used in lsort -command when the
#         elements are themselves lists, and you always want to look at
#         a particular item.
# ------------------------------------------------------------------
proc list_element_strcmp {index first second} {
  set theFirst [lindex $first $index]
  set theSecond [lindex $second $index]

  return [string compare $theFirst $theSecond]
}

# ------------------------------------------------------------------
#  PROC:  gdbtk_endian - returns BIG or LITTLE depending on target
#                        endianess
# ------------------------------------------------------------------

proc gdbtk_endian {} {
  if {[catch {gdb_cmd "show endian"} result]} {
    return "UNKNOWN"
  }
  if {[regexp {.*big endian} $result]} {
    set result "BIG"
  } elseif {[regexp {.*little endian} $result]} {
    set result "LITTLE"
  } else {
    set result "UNKNOWN"
  }
  return $result
}

# ------------------------------------------------------------------
#  PROC:  set_bg_colors - set background and text background for
#                        all windows.
# ------------------------------------------------------------------
proc set_bg_colors {{num ""}} {
  debug $num

  if {$num != ""} {
    set ::gdb_bg_num $num
  }
  set ::Colors(textbg) [pref get gdb/bg/$::gdb_bg_num]

  # calculate background as 80% of textbg
  set ::Colors(bg) [recolor $::Colors(textbg) 80]

  # calculate trough and activebackground as 90% of background
  set dbg [recolor $::Colors(bg) 90]

  r_setcolors . -background $::Colors(bg)
  r_setcolors . -highlightbackground $::Colors(bg)
  r_setcolors . -textbackground $::Colors(textbg)
  r_setcolors . -troughcolor $dbg
  r_setcolors . -activebackground $dbg

  pref_set_option_db 1
  ManagedWin::restart
}

# ------------------------------------------------------------------
#  PROC:  r_setcolors - recursively set background and text background for
#                        all windows.
# ------------------------------------------------------------------
proc r_setcolors {w option color} {
  debug "$w $option $color"

  # exception(s)
  if {![catch {$w isa Balloon} result] && $result == "1"} {
    return
  }
  catch {$w config $option $color}
  
  foreach child [winfo children $w] {
    r_setcolors $child $option $color
  }
}

# ------------------------------------------------------------------
#  PROC:  recolor - returns a darker or lighter color
# ------------------------------------------------------------------
proc recolor {color percent} {
  set c [winfo rgb . $color]
  return [format #%02x%02x%02x [expr {($percent * [lindex $c 0]) / 25600}]  \
	    [expr {($percent * [lindex $c 1]) / 25600}] [expr {($percent * [lindex $c 2]) / 25600}]]
}