'\"
'\" Copyright (c) 1995 DSC Technologies Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" @(#) tabset.n
'\"
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .HS name section [date [version]]
'\"	Replacement for .TH in other man pages.  See below for valid
'\"	section names.
'\"
'\" .AP type name in/out [indent]
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS [type [name]]
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .VS
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" @(#) man.macros 1.1 94/08/09 13:07:19
.\"
'\"	# Heading for Tcl/Tk man pages
.de HS
.ds ^3 \\0
.if !"\\$3"" .ds ^3 \\$3
.if '\\$2'cmds'      .TH "\\$1" 1 "\\*(^3" "\\$4" "\\$5"
.if '\\$2'lib'       .TH "\\$1" 3 "\\*(^3" "\\$4" "\\$5"
.if '\\$2'ncmds'     .TH "\\$1" n "\\*(^3" "\\$4" "\\$5"
.if '\\$2'tcl'       .TH "\\$1" n "\\*(^3"  Tcl   "Tcl Built-In Commands"
.if '\\$2'tk'        .TH "\\$1" n "\\*(^3"  Tk    "Tk Commands"
.if '\\$2'tclc'      .TH "\\$1" 3 "\\*(^3"  Tcl   "Tcl Library Procedures"
.if '\\$2'tkc'       .TH "\\$1" 3 "\\*(^3"  Tk    "Tk Library Procedures"
.if '\\$2'tclcmds'   .TH "\\$1" 1 "\\*(^3"  Tk    "Tcl Applications"
.if '\\$2'tkcmds'    .TH "\\$1" 1 "\\*(^3"  Tk    "Tk Applications"
.if '\\$2'iwid'      .TH "\\$1" 1 "\\*(^3"  Tk    "[incr Widgets]"
.if t .wh -1.3i ^B
.nr ^l \\n(.l
.ad b
..
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ie !"\\$3"" \{\
.ta \\n()Au \\n()Bu
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.HS iwidgets::tabset iwid
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
'\"
'\"
.SH NAME
iwidgets::tabset \- create and manipulate tabs as as set
.SH SYNOPSIS
\fBiwidgets::tabset\fR \fIpathName\fR ?\fIoptions\fR?
.SH "INHERITANCE"
itk::Widget <- iwidgets::Tabset
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fB
background  font              selectBackground    cursor
foreground  selectForeground  disabledForeground  height
width\fR
.fi
.LP
See the "options" manual entry for details on the standard options.
.SH "WIDGET-SPECIFIC OPTIONS"
.LP
.nf
Name:	\fBangle\fR
Class:	\fBAngle\fR
Command-Line Switch:	\fB-angle\fR
.fi
.IP
Specifes the angle of slope from the inner edge to the outer edge of the 
tab. An angle of 0 specifies square tabs. Valid ranges are 0 to 45 degrees 
inclusive. Default is 15 degrees. If tabPos is e or w, this option is ignored.
.LP
.nf
Name:	\fBbackdrop\fR
Class:	\fBBackdrop\fR
Command-Line Switch:	\fB-backdrop\fR
.fi
.IP
Specifies a background color to use when filling in the area behind the tabs.
.LP
.nf
Name:	\fBbevelAmount\fR
Class:	\fBBevelAmount\fR
Command-Line Switch:	\fB-bevelamount\fR
.fi
.IP
Specifes the size of tab corners. A value of 0 with angle set to 0 results 
in square tabs. A \fBbevelAmount\fR of 4, means that the tab will be 
drawn with angled corners that cut in 4 pixels from the edge of the 
tab. The default is 0.
.LP
.nf
Name:	\fBcommand\fR
Class:	\fBCommand\fR
Command-Line Switch:	\fB-command\fR
Specifes the prefix of a Tcl command to invoke to change the view in the 
widget associated with the tabset. When a user selects a tab, a Tcl command 
is invoked. The actual command consists of this option followed by a space 
and a number. The number is the numerical index of the tab that has been 
selected.
.LP
.nf
Name:	\fBequalTabs\fR
Class:	\fBEqualTabs\fR
Command-Line Switch:	\fB-equaltabs\fR
.fi
.IP
Specifies whether to force tabs to be equal sized or not. A value 
of \fBtrue\fR means constrain tabs to be equal sized. A value 
of \fBfalse\fR allows each tab to size based on the text label size. The 
value may have any of the forms accepted by the \fBTcl_GetBoolean\fR, such 
as \fBtrue\fR, \fBfalse\fR, \fB0\fR, \fB1\fR, \fByes\fR, or \fBno\fR.
.IP
For horizontally positioned tabs (\fBtabPos\fR is either \fBs\fR 
or \fBn\fR), \fBtrue\fR forces all tabs to be equal width (the width being 
equal to the longest label plus any padX specified). Horizontal tabs are 
always equal in height. 
.IP
For vertically positioned tabs (\fBtabPos\fR is either \fBw\fR or \fBe\fR), 
\fBtrue\fR forces all tabs to be equal height (the height being equal to 
the height of the label with the largest font). Vertically oriented tabs are 
always equal in width.
.LP
.nf
Name:	\fBgap\fR
Class:	\fBGap\fR
Command-Line Switch:	\fB-gap\fR
.fi
.IP
Specifies the amount of pixel space to place between each tab. Value may 
be any pixel offset value. In addition, a special keyword \fBoverlap\fR 
can be used as the value to achieve a standard overlap of tabs. This value 
may have any of the forms acceptable to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBmargin\fR
Class:	\fBMargin\fR
Command-Line Switch:	\fB-margin\fR
.fi
.IP
Specifies the amount of space to place between the outside edge of the 
tabset and the outside edge of its tabs. If \fBtabPos\fR is \fBs\fR, this 
is the amount of space between the bottom edge of the tabset and the 
bottom edge of the set of tabs. If \fBtabPos\fR is \fBn\fR, this is the 
amount of space between the top edge of the tabset and the top edge of the 
set of tabs. If \fBtabPos\fR is \fBe\fR, this is the amount of space between 
the right edge of the tabset and the right edge of the set of tabs. 
If \fBtabPos\fR is \fBw\fR, this is the amount of space between the left 
edge of the tabset and the left edge of the set of tabs. This value may 
have any of the forms acceptable to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBpadX\fR
Class:	\fBPadX\fR
Command-Line Switch:	\fB-padx\fR
.fi
.IP
Specifies a non-negative value indicating how much extra space to request for 
a tab around its label in the X-direction. When computing how large a 
window it needs, the tab will add this amount to the width it would normally 
need The tab will end up with extra internal space to the left and right of 
its text label. This value may have any of the forms acceptable 
to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBpadY\fR
Class:	\fBPadY\fR
Command-Line Switch:	\fB-pady\fR
.fi
.IP
Specifies a non-negative value indicating how much extra space to request 
for a tab around its label in the Y-direction. When computing how large a 
window it needs, the tab will add this amount to the height it would 
normally need The tab will end up with extra internal space to the top and 
bottom of its text label. This value may have any of the forms acceptable 
to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBraiseSelect\fR
Class:	\fBRaiseSelect\fR
Command-Line Switch:	\fB-raiseselect\fR
.fi
.IP
Specifes whether to slightly raise the selected tab from the rest of the 
tabs. The selected tab is drawn 2 pixels closer to the outside edge of the 
tabset than the unselected tabs. A value of true says to raise selected 
tabs, a value of false turns this off. The default is false. The value may 
have any of the forms accepted by the \fBTcl_GetBoolean\fR, such 
as \fBtrue\fR, \fBfalse\fR, \fB0\fR, \fB1\fR, \fByes\fR, or \fBno\fR.
.LP
.nf
Name:	\fBstart\fR
Class:	\fBStart\fR
Command-Line Switch:	\fB-start\fR
.fi
.IP
Specifies the amount of space to place between the left or top edge of the 
tabset and the starting edge of its tabs. For horizontally positioned tabs, 
this is the amount of space between the left edge of the tabset and the left 
edge of the first tab. For vertically positioned tabs, this is the amount 
of space between the top of the tabset and the top of the first tab. This 
value may change if the user performs a MButton-2 scroll on the tabs. This 
value may have any of the forms acceptable to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBstate\fR
Class:	\fBState\fR
Command-Line Switch:	\fB-state\fR
.fi
.IP
Sets the active state of the tabset. Specifying \fBnormal\fR allows all 
tabs to be selectable. Specifying \fBdisabled\fR disables the tabset 
causing all tabs to be drawn in the disabledForeground color.
.LP
.nf
Name:	\fBtabBorders\fR
Class:	\fBTabBorders\fR
Command-Line Switch:	\fB-tabborders\fR
.fi
.IP
Specifies whether to draw the borders of tabs that are not selected. 
Specifying true (the default) draws these borders, specifying false 
draws only the border around the selected tab. The value may have any 
of the forms accepted by the \fBTcl_GetBoolean\fR, such 
as \fBtrue\fR, \fBfalse,\fR \fB0\fR, \fB1\fR, \fByes\fR, or \fBno\fR.
.LP
.nf
Name:	\fBtabPos\fR
Class:	\fBTabPos\fR
Command-Line Switch:	\fB-tabpos\fR
.fi
.IP
Specifies the location of the set of tabs in relation to another widget. Must 
be \fBn\fR, \fBs\fR, \fBe\fR, or \fBw\fR. Defaults to \fBs\fR. North tabs 
open downward, South tabs open upward. West tabs open to the right, east 
tabs open to the left.
.BE
.SH DESCRIPTION
.PP
The \fBiwidgets::tabset\fR command creates a new window (given by the pathName 
argument) and makes it into a \fBtabset\fR widget. Additional \fIoptions\fR, 
described above may be specified on the command line or in the option 
database to configure aspects of the tabset such as its colors, font, and 
text. The \fBiwidgets::tabset\fR command returns its \fIpathName\fR argument. At the 
time this command is invoked, there must not exist a window 
named \fIpathName\fR, but pathName's parent must exist.
.PP
A \fBtabset\fR is a widget that contains a set of Tab buttons. It displays 
these tabs in a row or column depending on it tabpos. When a tab is 
clicked on, it becomes the only tab in the tab set that is selected. All 
other tabs are deselected. The Tcl command prefix associated with this 
tab (through the command tab configure option) is invoked with the tab 
index number appended to its argument list. This allows the tabset to 
control another widget such as a Notebook.
.SH TABS
Tabs are drawn to appear attached to another widget. The tabset draws an 
edge boundary along one of its edges. This edge is known as the attachment 
edge. This edge location is dependent on the value of \fBtabPos\fR. For 
example, if \fBtabPos\fR is \fBs\fR, the attachment edge wil be on the 
top side of the tabset (in order to attach to the bottom or south side of 
its attached widget). The selected tab is draw with a 3d relief to appear 
above the other tabs. This selected tab "opens" toward attachment edge. 
.PP
Tabs can be controlled in their location along the edges, the angle that 
tab sides are drawn with, gap between tabs, starting margin of tabs, 
internal padding around labels in a tab, the font, and its text or bitmap.
.SH "WIDGET-SPECIFIC METHODS"
.PP
The \fBiwidgets::tabset\fR command creates a new Tcl command whose name 
is \fIpathName\fR. This command may be used to invoke various operations on 
the widget. It has the following general form:
.DS C
\fIpathName option \fR?\fIarg arg ...\fR?
.DE
\fIoption\fR and the \fIarg\fRs
determine the exact behavior of the command.
.PP
Many of the widget commands for a tabset take as one argument an indicator 
of which tab of the tabset to operate on. These indicators are called indexes 
and may be specified in any of the following forms:
.TP
\fInumber\fR
Specifies the tab numerically, where 0 corresponds to the first tab in 
the tab set, 1 to the second, and so on.
.TP
\fBselect\fR
Specifies the currently selected tab's index. If no tab is currently 
selected, the value -1 is returned.
.TP
\fBend\fR
Specifes the last tab in the tabset's index. If the tabset is empty this 
will return -1.
.TP
\fIpattern\fR
If the index doesn't satisfy any of the above forms, then this form is 
used. Pattern is pattern-matched against the label of each tab in the 
tabset, in order from the first to the last tab, until a matching entry is 
found. The rules of Tcl_StringMatch are used.
.PP
'.............................................................................
The following commands are possible for tabset widgets:
.RS
.TP
\fIpathName\fR \fBadd\fR ?\fIoption\fR \fIvalue\fR \fIoption\fR \fIvalue\fR ...?
Add a new tab at the end of the tabset. Returns the child 
site \fIpathName\fR. If additional arguments are present, they specify 
any of the following options:
.RS
.TP
\fB-angle\fR \fIvalue\fR
Specifes the angle of slope from the inner edge to the outer edge of 
the tab. An angle of 0 specifies square tabs. Valid ranges are 0 to 
45 degrees inclusive. Default is 15 degrees. If this option is specified as 
an empty string (the default), then the angle option for the overall tabset 
is used.
.TP
\fB-background\fR \fIvalue\fR
Specifies a background color to use for displaying tabs when they are in 
their normal state (unselected). If this option is specified as an empty 
string (the default), then the background option for the overall tabset is 
used.
.TP
\fB-bevelamount\fR \fIvalue\fR
Specifes the size of tab corners. A value of 0 with angle set to 0 results 
in square tabs. A bevelAmount of 4, means that the tab will be drawn with 
angled corners that cut in 4 pixels from the edge of the tab. The default is 
0. This is generally only set at the tabset configuration level. Tabs 
normally will want to share the same bevelAmount.
.TP
\fB-bitmap\fR \fIvalue\fR
If label is a non-empty string, specifies a bitmap to display in the 
tab. Bitmap may be of any of the forms accepted by Tk_GetBitmap. 
.TP
\fB-disabledforeground\fR \fIvalue\fR
Specifies a foreground color to use for displaying tab labels when tabs are 
in their disable state. If this option is specified as an empty 
string (the default), then the disabledforeground option for the overall 
tabset is used.
.TP
\fB-font\fR \fIvalue\fR
Specifies the font to use when drawing the label on a tab. If this option 
is specified as an empty string then the font option for the overall 
tabset is used.
.TP
\fB-foreground\fR \fIvalue\fR
Specifies a foreground color to use for displaying tab labels when tabs 
are in their normal unselected state. If this option is specified as an 
empty string (the default), then the foreground option for the overall 
tabset is used.
.TP
\fB-image\fR \fIvalue\fR
If label is a non-empty string, specifies an image to display in the 
tab. Image must have been created with the image create command. Typically, 
if the image option is specified then it overrides other options that 
specify a bitmap or textual value to display in the widget; the image 
option may be reset to an empty string to re-enable a bitmap or text display. 
.TP
\fB-label\fR \fIvalue\fR
Specifies a text string to be placed in the tabs label. If this value is 
set, the bitmap option is overridden and this option is used instead. This 
label serves as an additional identifier used to reference the tab. This 
label may be used for the index value in widget commands.
.TP
\fB-selectbackground\fR \fIvalue\fR
Specifies a background color to use for displaying the selected tab. If 
this option is specified as an empty string (the default), then the 
selectBackground option for the overall tabset is used.
.TP
\fB-selectforeground\fR \fIvalue\fR
Specifies a foreground color to use for displaying the selected tab. If 
this option is specified as an empty string (the default), then the 
selectForeground option for the overall tabset is used.
.TP
\fB-padx\fR \fIvalue\fR
Specifies a non-negative value indicating how much extra space to request 
for a tab around its label in the X-direction. When computing how large 
a window it needs, the tab will add this amount to the width it would 
normally need The tab will end up with extra internal space to the left 
and right of its text label. This value may have any of the forms acceptable 
to Tk_GetPixels. If this option is specified as an empty string (the 
default), then the padX option for the overall tabset is used
.TP
\fB-pady\fR \fIvalue\fR
Specifies a non-negative value indicating how much extra space to request 
for a tab around its label in the Y-direction. When computing how large 
a window it needs, the tab will add this amount to the height it would 
normally need The tab will end up with extra internal space to the top 
and bottom of its text label. This value may have any of the forms 
acceptable to Tk_GetPixels. If this option is specified as an empty 
string (the default), then the padY option for the overall tabset is used
.TP
\fB-state\fR \fIvalue\fR
Sets the state of the tab. Specifying normal allows this tab to be 
selectable. Specifying disabled disables the this tab causing its tab label 
to be drawn in the disabledForeground color. The tab will not respond to 
events until the state is set back to normal.
.RE
.TP
\fIpathName\fR \fBconfigure\fR ?\fIoption\fR? ?\fIvalue\fR \fIoption\fR \fIvalue\fR ...?
Query or modify the configuration options of the widget. If no \fIoption\fR 
is specified, returns a list describing all of the available options 
for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for information on the 
format of this list). If option is specified with no value, then the 
command returns a list describing the one named option (this list will be 
identical to the corresponding sublist of the value returned if no option 
is specified). If one or more option-value pairs are specified, then the 
command modifies the given widget option(s) to have the given value(s); in 
this case the command returns an empty string. \fIOption\fR may have any 
of the values accepted by the iwidgets::tabset command.
.TP
\fIpathName\fR \fBdelete\fR \fIindex1\fR ?\fIindex2\fR?
Delete all of the tabs between \fIindex1\fR and \fIindex2\fR inclusive. 
If \fIindex2\fR is omitted then it defaults to \fIindex1\fR. Returns an 
empty string.
.TP
\fIpathName\fR \fBindex\fR \fIindex\fR
Returns the numerical index corresponding to \fIindex\fR.
.TP
\fIpathName\fR \fBinsert\fR \fIindex\fR ?\fIoption\fR \fIvalue\fR \fIoption\fR \fIvalue\fR ...?
Insert a new tab in the tabset before the tab specified by \fIindex\fR. The 
additional arguments are the same as for the \fBadd\fR command. Returns 
the tab's \fIpathName\fR.
.TP
\fIpathName\fR \fBnext\fR
Advances the selected tab to the next tab (order is determined by insertion 
order). If the currently selected tab is the last tab in the tabset, the 
selection wraps around to the first tab. It behaves as if the user 
selected the next tab.
.TP
\fIpathName\fR \fBtabconfigure\fR \fIindex\fR ?\fIoption\fR? ?\fIvalue\fR?
This command is similar to the \fBconfigure\fR command, except that it 
applies to the options for an individual tab, whereas configure applies to 
the options for the tabset as a whole. Options may have any of the values 
accepted by the \fBadd\fR widget command. If options are specified, options 
are modified as indicated in the command and the command returns an empty 
string. If no options are specified, returns a list describing the current 
options for tab index (see \fBTk_ConfigureInfo\fR for information on 
the format of this list).
.TP
\fIpathName\fR \fBprev\fR
Moves the selected tab to the previous tab (order is determined by insertion 
order). If the currently selected tab is the first tab in the tabset, the 
selection wraps around to the last tab in the tabset. It behaves as if 
the user selected the previous tab.
.TP
\fIpathName\fR \fBselect\fR \fIindex\fR
Selects the tab specified by \fIindex\fR as the currently selected tab. It 
behaves as if the user selected the new tab.

.SH EXAMPLE 
.PP
Following is an example that creates a tabset with two tabs and a list box 
that the tabset controls. In addition selecting an item from the list 
also selects the corresponding tab.
.PP
.nf
.IP
.ta 2c 8c 12c
package require Iwidgets 4.0
# Define a proc that knows how to select an item 
# from a list given an index from the tabset -command callback.
  proc selectItem { item } {
    .l selection clear [.l curselection]
    .l selection set $item
    .l see $item
}
.IP
# Define a proc that knows how to select a tab 
# given a y pixel coordinate from the list..
  proc selectTab { y } {
    set whichItem [.l nearest $y]
    .ts select $whichItem
}
.IP
# Create a listbox with two items (one and two) 
# and bind button 1 press to the selectTab procedure.
  listbox .l -selectmode single -exportselection false
  .l insert end one
  .l insert end two
  .l selection set 0
  pack .l
  bind .l <ButtonPress-1> { selectTab %y }
.IP
# Create a tabset, set its -command to call selectItem
# Add two labels to the tabset (one and two).
  iwidgets::tabset .ts -command selectItem
  .ts add -label 1
  .ts add -label 2
  .ts select 0
  pack .ts -fill x -expand no
.fi
.SH AUTHOR
Bill W. Scott
.SH KEYWORDS
tab tabset notebook tabnotebook