'\"
'\" Copyright (c) 1990-1994 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" RCS: @(#) $Id: focus.n,v 1.2 1998/09/14 18:22:56 stanton Exp $
'\" 
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .CS
'\"	Begin code excerpt.
'\"
'\" .CE
'\"	End code excerpt.
'\"
'\" .VS ?version? ?br?
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.  The first argument is ignored and used for recording
'\"	the version when the .VS was added, so that the sidebars can be
'\"	found and removed when they reach a certain age.  If another argument
'\"	is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" .SO
'\"	Start of list of standard options for a Tk widget.  The
'\"	options follow on successive lines, in four columns separated
'\"	by tabs.
'\"
'\" .SE
'\"	End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\"	Start of description of a specific option.  cmdName gives the
'\"	option's name as specified in the class command, dbName gives
'\"	the option's name in the option database, and dbClass gives
'\"	the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\"	Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
'\"
'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
'\"	# SO - start of list of standard options
.de SO
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
'\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\fBoptions\\fR manual entry for details on the standard options.
..
'\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
'\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
'\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.de UL
\\$1\l'|0\(ul'\\$2
..
.TH focus n 4.0 Tk "Tk Built-In Commands"
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
focus \- Manage the input focus
.SH SYNOPSIS
\fBfocus\fR
.sp
\fBfocus \fIwindow\fR
.sp
\fBfocus \fIoption\fR ?\fIarg arg ...\fR?
.BE

.SH DESCRIPTION
.PP
The \fBfocus\fR command is used to manage the Tk input focus.
At any given time, one window on each display is designated as
the \fIfocus window\fR;  any key press or key release events for the
display are sent to that window.
It is normally up to the window manager to redirect the focus among the
top-level windows of a display.  For example, some window managers
automatically set the input focus to a top-level window whenever
the mouse enters it;  others redirect the input focus only when
the user clicks on a window.
Usually the window manager will set the focus
only to top-level windows, leaving it up to the application to
redirect the focus among the children of the top-level.
.PP
Tk remembers one focus window for each top-level (the most recent
descendant of that top-level to receive the focus);  when the window
manager gives the focus
to a top-level, Tk automatically redirects it to the remembered
window.  Within a top-level Tk uses an \fIexplicit\fR focus model
by default.  Moving the mouse within a top-level does not normally
change the focus;  the focus changes only when a widget
decides explicitly to claim the focus (e.g., because of a button
click), or when the user types a key such as Tab that moves the
focus.
.PP
The Tcl procedure \fBtk_focusFollowsMouse\fR may be invoked to
create an \fIimplicit\fR focus model:  it reconfigures Tk so that
the focus is set to a window whenever the mouse enters it.
The Tcl procedures \fBtk_focusNext\fR and \fBtk_focusPrev\fR
implement a focus order among the windows of a top-level;  they
are used in the default bindings for Tab and Shift-Tab, among other
things.
.PP
The \fBfocus\fR command can take any of the following forms:
.TP
\fBfocus\fR
Returns the path name of the focus window on the display containing
the application's main window,  or an empty string if no window in
this application has the focus on that display.   Note:  it is
better to specify the display explicitly using \fB\-displayof\fR
(see below) so that the code will work in applications using multiple
displays.
.TP
\fBfocus \fIwindow\fR
If the application currently has the input focus on \fIwindow\fR's
display, this command resets the input focus for \fIwindow\fR's display
to \fIwindow\fR and returns an empty string.
If the application doesn't currently have the  input focus on
\fIwindow\fR's display, \fIwindow\fR will be remembered as the focus
for its top-level;  the next time the focus arrives at the top-level,
Tk will redirect it to \fIwindow\fR.
If \fIwindow\fR is an empty string then the command does nothing.
.TP
\fBfocus \-displayof\fR \fIwindow\fR
Returns the name of the focus window on the display containing \fIwindow\fR.
If the focus window for \fIwindow\fR's display isn't in this
application, the return value is an empty string.
.TP
\fBfocus \-force \fIwindow\fR
Sets the focus of \fIwindow\fR's display to \fIwindow\fR, even if
the application doesn't currently have the input focus for the display.
This command should be used sparingly, if at all.
In normal usage, an application should not claim the focus for
itself;  instead, it should wait for the window manager to give it
the focus.
If \fIwindow\fR is an empty string then the command does nothing.
.TP
\fBfocus \-lastfor\fR \fIwindow\fR
Returns the name of the most recent window to have the input focus
among all the windows in the same top-level as \fIwindow\fR.
If no window in that top-level has ever had the input focus, or
if the most recent focus window has been deleted, then the name
of the top-level is returned.  The return value is the window that
will receive the input focus the next time the window manager gives
the focus to the top-level.

.SH "QUIRKS"
.PP
When an internal window receives the input focus, Tk doesn't actually
set the X focus to that window;  as far as X is concerned, the focus
will stay on the top-level window containing the window with the focus.
However, Tk generates FocusIn and FocusOut events just as if the X
focus were on the internal window.   This approach gets around a
number of problems that would occur if the X focus were actually moved;
the fact that the X focus is on the top-level is invisible unless
you use C code to query the X server directly.

.SH KEYWORDS
events, focus, keyboard, top-level, window manager