'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-2000 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" RCS: @(#) $Id: expr.n,v 1.9 2002/07/01 18:24:39 jenglish Exp $
'\" 
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .CS
'\"	Begin code excerpt.
'\"
'\" .CE
'\"	End code excerpt.
'\"
'\" .VS ?version? ?br?
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.  The first argument is ignored and used for recording
'\"	the version when the .VS was added, so that the sidebars can be
'\"	found and removed when they reach a certain age.  If another argument
'\"	is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" .SO
'\"	Start of list of standard options for a Tk widget.  The
'\"	options follow on successive lines, in four columns separated
'\"	by tabs.
'\"
'\" .SE
'\"	End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\"	Start of description of a specific option.  cmdName gives the
'\"	option's name as specified in the class command, dbName gives
'\"	the option's name in the option database, and dbClass gives
'\"	the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\"	Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
'\"
'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
'\"	# SO - start of list of standard options
.de SO
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
'\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\fBoptions\\fR manual entry for details on the standard options.
..
'\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
'\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
'\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.de UL
\\$1\l'|0\(ul'\\$2
..
.TH expr n 8.4 Tcl "Tcl Built-In Commands"
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
expr \- Evaluate an expression
.SH SYNOPSIS
\fBexpr \fIarg \fR?\fIarg arg ...\fR?
.BE

.SH DESCRIPTION
.PP
Concatenates \fIarg\fR's (adding separator spaces between them),
evaluates the result as a Tcl expression, and returns the value.
The operators permitted in Tcl expressions are a subset of
the operators permitted in C expressions, and they have the
same meaning and precedence as the corresponding C operators.
Expressions almost always yield numeric results
(integer or floating-point values).
For example, the expression
.CS
\fBexpr 8.2 + 6\fR
.CE
evaluates to 14.2.
Tcl expressions differ from C expressions in the way that
operands are specified.  Also, Tcl expressions support
non-numeric operands and string comparisons.
.SH OPERANDS
.PP
A Tcl expression consists of a combination of operands, operators,
and parentheses.
White space may be used between the operands and operators and
parentheses; it is ignored by the expression's instructions.
Where possible, operands are interpreted as integer values.
Integer values may be specified in decimal (the normal case), in octal (if the
first character of the operand is \fB0\fR), or in hexadecimal (if the first
two characters of the operand are \fB0x\fR).
If an operand does not have one of the integer formats given
above, then it is treated as a floating-point number if that is
possible.  Floating-point numbers may be specified in any of the
ways accepted by an ANSI-compliant C compiler (except that the
\fBf\fR, \fBF\fR, \fBl\fR, and \fBL\fR suffixes will not be permitted in
most installations).  For example, all of the
following are valid floating-point numbers:  2.1, 3., 6e4, 7.91e+16.
If no numeric interpretation is possible, then an operand is left
as a string (and only a limited set of operators may be applied to
it).
.PP
.VS 8.4
On 32-bit systems, integer values MAX_INT (0x7FFFFFFF) and MIN_INT
(-0x80000000) will be represented as 32-bit values, and integer values
outside that range will be represented as 64-bit values (if that is
possible at all.)
.VE 8.4
.PP
Operands may be specified in any of the following ways:
.IP [1]
As an numeric value, either integer or floating-point.
.IP [2]
As a Tcl variable, using standard \fB$\fR notation.
The variable's value will be used as the operand.
.IP [3]
As a string enclosed in double-quotes.
The expression parser will perform backslash, variable, and
command substitutions on the information between the quotes,
and use the resulting value as the operand
.IP [4]
As a string enclosed in braces.
The characters between the open brace and matching close brace
will be used as the operand without any substitutions.
.IP [5]
As a Tcl command enclosed in brackets.
The command will be executed and its result will be used as
the operand.
.IP [6]
As a mathematical function whose arguments have any of the above
forms for operands, such as \fBsin($x)\fR.  See below for a list of defined
functions.
.LP
Where substitutions occur above (e.g. inside quoted strings), they
are performed by the expression's instructions.
However, an additional layer of substitution may already have
been performed by the command parser before the expression
processor was called.
As discussed below, it is usually best to enclose expressions
in braces to prevent the command parser from performing substitutions
on the contents.
.PP
For some examples of simple expressions, suppose the variable
\fBa\fR has the value 3 and
the variable \fBb\fR has the value 6.
Then the command on the left side of each of the lines below
will produce the value on the right side of the line:
.CS
.ta 6c
\fBexpr 3.1 + $a	6.1
expr 2 + "$a.$b"	5.6
expr 4*[llength "6 2"]	8
expr {{word one} < "word $a"}	0\fR
.CE
.SH OPERATORS
.PP
The valid operators are listed below, grouped in decreasing order
of precedence:
.TP 20
\fB\-\0\0+\0\0~\0\0!\fR
Unary minus, unary plus, bit-wise NOT, logical NOT.  None of these operands
may be applied to string operands, and bit-wise NOT may be
applied only to integers.
.TP 20
\fB*\0\0/\0\0%\fR
Multiply, divide, remainder.  None of these operands may be
applied to string operands, and remainder may be applied only
to integers.
The remainder will always have the same sign as the divisor and
an absolute value smaller than the divisor.
.TP 20
\fB+\0\0\-\fR
Add and subtract.  Valid for any numeric operands.
.TP 20
\fB<<\0\0>>\fR
Left and right shift.  Valid for integer operands only.
A right shift always propagates the sign bit.
.TP 20
\fB<\0\0>\0\0<=\0\0>=\fR
Boolean less, greater, less than or equal, and greater than or equal.
Each operator produces 1 if the condition is true, 0 otherwise.
These operators may be applied to strings as well as numeric operands,
in which case string comparison is used.
.TP 20
\fB==\0\0!=\fR
Boolean equal and not equal.  Each operator produces a zero/one result.
Valid for all operand types.
.VS 8.4
.TP 20
\fBeq\0\0ne\fR
Boolean string equal and string not equal.  Each operator produces a
zero/one result.  The operand types are interpreted only as strings.
.VE 8.4
.TP 20
\fB&\fR
Bit-wise AND.  Valid for integer operands only.
.TP 20
\fB^\fR
Bit-wise exclusive OR.  Valid for integer operands only.
.TP 20
\fB|\fR
Bit-wise OR.  Valid for integer operands only.
.TP 20
\fB&&\fR
Logical AND.  Produces a 1 result if both operands are non-zero,
0 otherwise.
Valid for boolean and numeric (integers or floating-point) operands only.
.TP 20
\fB||\fR
Logical OR.  Produces a 0 result if both operands are zero, 1 otherwise.
Valid for boolean and numeric (integers or floating-point) operands only.
.TP 20
\fIx\fB?\fIy\fB:\fIz\fR
If-then-else, as in C.  If \fIx\fR
evaluates to non-zero, then the result is the value of \fIy\fR.
Otherwise the result is the value of \fIz\fR.
The \fIx\fR operand must have a numeric value.
.LP
See the C manual for more details on the results
produced by each operator.
All of the binary operators group left-to-right within the same
precedence level.  For example, the command
.CS
\fBexpr 4*2 < 7\fR
.CE
returns 0.
.PP
The \fB&&\fR, \fB||\fR, and \fB?:\fR operators have ``lazy
evaluation'', just as in C, 
which means that operands are not evaluated if they are
not needed to determine the outcome.  For example, in the command
.CS
\fBexpr {$v ? [a] : [b]}\fR
.CE
only one of \fB[a]\fR or \fB[b]\fR will actually be evaluated,
depending on the value of \fB$v\fR.  Note, however, that this is
only true if the entire expression is enclosed in braces;  otherwise
the Tcl parser will evaluate both \fB[a]\fR and \fB[b]\fR before
invoking the \fBexpr\fR command.
.SH "MATH FUNCTIONS"
.PP
Tcl supports the following mathematical functions in expressions:
.DS
.ta 3c 6c 9c
\fBabs\fR	\fBcosh\fR	\fBlog\fR	\fBsqrt\fR
\fBacos\fR	\fBdouble\fR	\fBlog10\fR	\fBsrand\fR
\fBasin\fR	\fBexp\fR	\fBpow\fR	\fBtan\fR
\fBatan\fR	\fBfloor\fR	\fBrand\fR	\fBtanh\fR
\fBatan2\fR	\fBfmod\fR	\fBround\fR
\fBceil\fR	\fBhypot\fR	\fBsin\fR
\fBcos\fR	\fBint\fR	\fBsinh\fR
.DE
.PP
.TP
\fBabs(\fIarg\fB)\fR
Returns the absolute value of \fIarg\fR.  \fIArg\fR may be either
integer or floating-point, and the result is returned in the same form.
.TP
\fBacos(\fIarg\fB)\fR
Returns the arc cosine of \fIarg\fR, in the range [\fI0\fR,\fIpi\fR]
radians. \fIArg\fR should be in the range [\fI-1\fR,\fI1\fR].
.TP
\fBasin(\fIarg\fB)\fR
Returns the arc sine of \fIarg\fR, in the range [\fI-pi/2\fR,\fIpi/2\fR]
radians.  \fIArg\fR should be in the range [\fI-1\fR,\fI1\fR].
.TP
\fBatan(\fIarg\fB)\fR
Returns the arc tangent of \fIarg\fR, in the range [\fI-pi/2\fR,\fIpi/2\fR]
radians.
.TP
\fBatan2(\fIy, x\fB)\fR
Returns the arc tangent of \fIy\fR/\fIx\fR, in the range [\fI-pi\fR,\fIpi\fR]
radians.  \fIx\fR and \fIy\fR cannot both be 0.  If \fIx\fR is greater
than \fI0\fR, this is equivalent to \fBatan(\fIy/x\fB)\fR.
.TP
\fBceil(\fIarg\fB)\fR
Returns the smallest integral floating point value (i.e. with a zero
fractional part) not less than \fIarg\fR.
.TP
\fBcos(\fIarg\fB)\fR
Returns the cosine of \fIarg\fR, measured in radians.
.TP
\fBcosh(\fIarg\fB)\fR
Returns the hyperbolic cosine of \fIarg\fR.  If the result would cause
an overflow, an error is returned.
.TP
\fBdouble(\fIarg\fB)\fR
If \fIarg\fR is a floating value, returns \fIarg\fR, otherwise converts
\fIarg\fR to floating and returns the converted value.
.TP
\fBexp(\fIarg\fB)\fR
Returns the exponential of \fIarg\fR, defined as \fIe\fR**\fIarg\fR.
If the result would cause an overflow, an error is returned.
.TP
\fBfloor(\fIarg\fB)\fR
Returns the largest integral floating point value (i.e. with a zero
fractional part) not greater than \fIarg\fR.
.TP
\fBfmod(\fIx, y\fB)\fR
Returns the floating-point remainder of the division of \fIx\fR by
\fIy\fR.  If \fIy\fR is 0, an error is returned.
.TP
\fBhypot(\fIx, y\fB)\fR
Computes the length of the hypotenuse of a right-angled triangle
\fBsqrt(\fIx\fR*\fIx\fR+\fIy\fR*\fIy\fB)\fR.
.TP
\fBint(\fIarg\fB)\fR
.VS 8.4
If \fIarg\fR is an integer value, returns \fIarg\fR, otherwise
converts \fIarg\fR to an integer (of the same size as a machine word,
i.e. 32-bits on 32-bit systems, and 64-bits on 64-bit systems) by
truncation and returns the converted value.
.VE 8.4
.TP
\fBlog(\fIarg\fB)\fR
Returns the natural logarithm of \fIarg\fR.  \fIArg\fR must be a
positive value.
.TP
\fBlog10(\fIarg\fB)\fR
Returns the base 10 logarithm of \fIarg\fR.  \fIArg\fR must be a
positive value.
.TP
\fBpow(\fIx, y\fB)\fR
Computes the value of \fIx\fR raised to the power \fIy\fR.  If \fIx\fR
is negative, \fIy\fR must be an integer value.
.TP
\fBrand()\fR
Returns a floating point number from zero to just less than one or, in
mathematical terms, the range [\fI0\fR,\fI1\fR).  The seed comes from
the internal clock of the machine or may be set manual with the
\fBsrand\fR function.
.TP
\fBround(\fIarg\fB)\fR
If \fIarg\fR is an integer value, returns \fIarg\fR, otherwise converts
\fIarg\fR to integer by rounding and returns the converted value.
.TP
\fBsin(\fIarg\fB)\fR
Returns the sine of \fIarg\fR, measured in radians.
.TP
\fBsinh(\fIarg\fB)\fR
Returns the hyperbolic sine of \fIarg\fR.  If the result would cause
an overflow, an error is returned.
.TP
\fBsqrt(\fIarg\fB)\fR
Returns the square root of \fIarg\fR.  \fIArg\fR must be non-negative.
.TP
\fBsrand(\fIarg\fB)\fR
The \fIarg\fR, which must be an integer, is used to reset the seed for
the random number generator.  Returns the first random number from
that seed.  Each interpreter has its own seed.
.TP
\fBtan(\fIarg\fB)\fR
Returns the tangent of \fIarg\fR, measured in radians.
.TP
\fBtanh(\fIarg\fB)\fR
Returns the hyperbolic tangent of \fIarg\fR.
.TP
\fBwide(\fIarg\fB)\fR
.VS 8.4
Converts \fIarg\fR to a value at least 64-bits wide (by sign-extension
if \fIarg\fR is a 32-bit number.)
.VE 8.4
.PP
In addition to these predefined functions, applications may
define additional functions using \fBTcl_CreateMathFunc\fR().
.SH "TYPES, OVERFLOW, AND PRECISION"
.PP
All internal computations involving integers are done with the C type
\fIlong\fR, and all internal computations involving floating-point are
done with the C type \fIdouble\fR.
When converting a string to floating-point, exponent overflow is
detected and results in a Tcl error.
For conversion to integer from string, detection of overflow depends
on the behavior of some routines in the local C library, so it should
be regarded as unreliable.
In any case, integer overflow and underflow are generally not detected
reliably for intermediate results.  Floating-point overflow and underflow
are detected to the degree supported by the hardware, which is generally
pretty reliable.
.PP
Conversion among internal representations for integer, floating-point,
and string operands is done automatically as needed.
For arithmetic computations, integers are used until some
floating-point number is introduced, after which floating-point is used.
For example,
.CS
\fBexpr 5 / 4\fR
.CE
returns 1, while
.CS
\fBexpr 5 / 4.0\fR
\fBexpr 5 / ( [string length "abcd"] + 0.0 )\fR
.CE
both return 1.25.
Floating-point values are always returned with a ``\fB.\fR''
or an \fBe\fR so that they will not look like integer values.  For
example,
.CS
\fBexpr 20.0/5.0\fR
.CE
returns \fB4.0\fR, not \fB4\fR.

.SH "STRING OPERATIONS"
.PP
String values may be used as operands of the comparison operators,
although the expression evaluator tries to do comparisons as integer
or floating-point when it can,
.VS 8.4
except in the case of the \fBeq\fR and \fBne\fR operators.
.VE 8.4
If one of the operands of a comparison is a string and the other
has a numeric value, the numeric operand is converted back to
a string using the C \fIsprintf\fR format specifier
\fB%d\fR for integers and \fB%g\fR for floating-point values.
For example, the commands
.CS
\fBexpr {"0x03" > "2"}\fR
\fBexpr {"0y" < "0x12"}\fR
.CE
both return 1.  The first comparison is done using integer
comparison, and the second is done using string comparison after
the second operand is converted to the string \fB18\fR.
Because of Tcl's tendency to treat values as numbers whenever
possible, it isn't generally a good idea to use operators like \fB==\fR
when you really want string comparison and the values of the
operands could be arbitrary;  it's better in these cases to use
.VS 8.4
the \fBeq\fR or \fBne\fR operators, or
.VE 8.4
the \fBstring\fR command instead.

.SH "PERFORMANCE CONSIDERATIONS"
.PP
Enclose expressions in braces for the best speed and the smallest
storage requirements.
This allows the Tcl bytecode compiler to generate the best code.
.PP
As mentioned above, expressions are substituted twice:
once by the Tcl parser and once by the \fBexpr\fR command.
For example, the commands
.CS
\fBset a 3\fR
\fBset b {$a + 2}\fR
\fBexpr $b*4\fR
.CE
return 11, not a multiple of 4.
This is because the Tcl parser will first substitute \fB$a + 2\fR for
the variable \fBb\fR,
then the \fBexpr\fR command will evaluate the expression \fB$a + 2*4\fR.
.PP
Most expressions do not require a second round of substitutions.
Either they are enclosed in braces or, if not,
their variable and command substitutions yield numbers or strings
that don't themselves require substitutions.
However, because a few unbraced expressions 
need two rounds of substitutions,
the bytecode compiler must emit
additional instructions to handle this situation.
The most expensive code is required for
unbraced expressions that contain command substitutions.
These expressions must be implemented by generating new code
each time the expression is executed.

.SH "SEE ALSO"
array(n), string(n), Tcl(n)

.SH KEYWORDS
arithmetic, boolean, compare, expression, fuzzy comparison