'\"
'\" Copyright (c) 1990 The Regents of the University of California.
'\" Copyright (c) 1994-1998 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" RCS: @(#) $Id: GetCursor.3,v 1.5 2002/08/05 04:30:38 dgp Exp $
'\" 
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .CS
'\"	Begin code excerpt.
'\"
'\" .CE
'\"	End code excerpt.
'\"
'\" .VS ?version? ?br?
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.  The first argument is ignored and used for recording
'\"	the version when the .VS was added, so that the sidebars can be
'\"	found and removed when they reach a certain age.  If another argument
'\"	is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" .SO
'\"	Start of list of standard options for a Tk widget.  The
'\"	options follow on successive lines, in four columns separated
'\"	by tabs.
'\"
'\" .SE
'\"	End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\"	Start of description of a specific option.  cmdName gives the
'\"	option's name as specified in the class command, dbName gives
'\"	the option's name in the option database, and dbClass gives
'\"	the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\"	Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
'\"
'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
'\"	# SO - start of list of standard options
.de SO
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
'\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\fBoptions\\fR manual entry for details on the standard options.
..
'\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
'\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
'\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.de UL
\\$1\l'|0\(ul'\\$2
..
.TH Tk_AllocCursorFromObj 3 8.1 Tk "Tk Library Procedures"
.BS
.SH NAME
Tk_AllocCursorFromObj, Tk_GetCursor, Tk_GetCursorFromObj, Tk_GetCursorFromData, Tk_NameOfCursor, Tk_FreeCursorFromObj, Tk_FreeCursor \- maintain database of cursors
.SH SYNOPSIS
.nf
\fB#include <tk.h>\fR
.sp
.VS 8.1
Tk_Cursor
\fBTk_AllocCursorFromObj(\fIinterp, tkwin, objPtr\fB)\fR
.sp
Tk_Cursor
\fBTk_GetCursor(\fIinterp, tkwin, name\fB)\fR
.sp
Tk_Cursor
\fBTk_GetCursorFromObj(\fItkwin, objPtr\fB)\fR
.VE
.sp
Tk_Cursor
\fBTk_GetCursorFromData(\fIinterp, tkwin, source, mask, width, height, xHot, yHot, fg, bg\fB)\fR
.sp
CONST char *
\fBTk_NameOfCursor(\fIdisplay, cursor\fB)\fR
.sp
.VS 8.1
\fBTk_FreeCursorFromObj(\fItkwin, objPtr\fB)\fR
.VE
.sp
\fBTk_FreeCursor(\fIdisplay, cursor\fB)\fR
.SH ARGUMENTS
.AS "unsigned long" *pixelPtr
.AP Tcl_Interp *interp in
Interpreter to use for error reporting.
.AP Tk_Window tkwin in
Token for window in which the cursor will be used.
.VS 8.1 br
.AP Tcl_Obj *objPtr in/out
Description of cursor;  see below for possible values.  Internal rep will be
modified to cache pointer to corresponding Tk_Cursor.
.AP char *name in
Same as \fIobjPtr\fR except description of cursor is passed as a string and
resulting Tk_Cursor isn't cached.
.VE
.AP "CONST char" *source in
Data for cursor cursor, in standard cursor format.
.AP "CONST char" *mask in
Data for mask cursor, in standard cursor format.
.AP "int" width in
Width of \fIsource\fR and \fImask\fR.
.AP "int" height in
Height of \fIsource\fR and \fImask\fR.
.AP "int" xHot in
X-location of cursor hot-spot.
.AP "int" yHot in
Y-location of cursor hot-spot.
.AP Tk_Uid fg in
Textual description of foreground color for cursor.
.AP Tk_Uid bg in
Textual description of background color for cursor.
.AP Display *display in
Display for which \fIcursor\fR was allocated.
.AP Tk_Cursor cursor in
Opaque Tk identifier for cursor.  If passed to \fBTk_FreeCursor\fR, must
have been returned by some previous call to \fBTk_GetCursor\fR or
\fBTk_GetCursorFromData\fR.
.BE

.SH DESCRIPTION
.PP
These procedures manage a collection of cursors
being used by an application.  The procedures allow cursors to be
re-used efficiently, thereby avoiding server overhead, and also
allow cursors to be named with character strings.
.PP
.VS 8.1
\fBTk_AllocCursorFromObj\fR takes as argument an object describing a
cursor, and returns an opaque Tk identifier for a cursor corresponding
to the description.  It re-uses an existing cursor if possible and
creates a new one otherwise.  \fBTk_AllocCursorFromObj\fR caches
information about the return value in \fIobjPtr\fR, which speeds up
future calls to procedures such as \fBTk_AllocCursorFromObj\fR and
\fBTk_GetCursorFromObj\fR. If an error occurs in creating the cursor,
such as when \fIobjPtr\fR refers to a non-existent file, then \fBNone\fR
is returned and an error message will be stored in \fIinterp\fR's result
if \fIinterp\fR isn't NULL.  \fIObjPtr\fR must contain a standard Tcl
list with one of the following forms:
.VE
.TP
\fIname\fR\0[\fIfgColor\fR\0[\fIbgColor\fR]]
\fIName\fR is the name of a cursor in the standard X cursor cursor,
i.e., any of the names defined in \fBcursorcursor.h\fR, without
the \fBXC_\fR.  Some example values are \fBX_cursor\fR, \fBhand2\fR,
or \fBleft_ptr\fR.  Appendix B of ``The X Window System''
by Scheifler & Gettys has illustrations showing what each of these
cursors looks like.  If \fIfgColor\fR and \fIbgColor\fR are both
specified, they give the foreground and background colors to use
for the cursor (any of the forms acceptable to \fBTk_GetColor\fR
may be used).  If only \fIfgColor\fR is specified, then there
will be no background color:  the background will be transparent.
If no colors are specified, then the cursor
will use black for its foreground color and white for its background
color.
.RS
.PP
The Macintosh version of Tk supports all of the X cursors and
will also accept any of the standard Mac cursors
including \fBibeam\fR, \fBcrosshair\fR, \fBwatch\fR, \fBplus\fR, and
\fBarrow\fR.  In addition, Tk will load Macintosh cursor resources of
the types \fBcrsr\fR (color) and \fBCURS\fR (black and white) by the
name of the of the resource.  The application and all its open
dynamic library's resource files will be searched for the named
cursor.  If there are conflicts color cursors will always be loaded
in preference to black and white cursors.
.RE
.TP
\fB@\fIsourceName\0maskName\0fgColor\0bgColor\fR
In this form, \fIsourceName\fR and \fImaskName\fR are the names of
files describing cursors for the cursor's source bits and mask.
Each file must be in standard X11 or X10 cursor format.
\fIFgColor\fR and \fIbgColor\fR 
indicate the colors to use for the
cursor, in any of the forms acceptable to \fBTk_GetColor\fR.  This
form of the command will not work on Macintosh or Windows computers.
.TP
\fB@\fIsourceName\0fgColor\fR
This form is similar to the one above, except that the source is
used as mask also.  This means that the cursor's background is
transparent.  This form of the command will not work on Macintosh
or Windows computers.
.TP
\fB@\fIsourceName\fR
This form only works on Windows, and will load a Windows system
cursor (\fB.ani\fR or \fB.cur\fR) from the file specified in
\fIsourceName\fR.
.PP
.VS 8.1
\fBTk_GetCursor\fR is identical to \fBTk_AllocCursorFromObj\fR except
that the description of the cursor is specified with a string instead
of an object.  This prevents \fBTk_GetCursor\fR from caching the
return value, so \fBTk_GetCursor\fR is less efficient than
\fBTk_AllocCursorFromObj\fR.
.PP
\fBTk_GetCursorFromObj\fR returns the token for an existing cursor, given
the window and description used to create the cursor.
\fBTk_GetCursorFromObj\fR doesn't actually create the cursor; the cursor
must already have been created with a previous call to
\fBTk_AllocCursorFromObj\fR or \fBTk_GetCursor\fR.  The return
value is cached in \fIobjPtr\fR, which speeds up
future calls to \fBTk_GetCursorFromObj\fR with the same \fIobjPtr\fR
and \fItkwin\fR.
.VE
.PP
\fBTk_GetCursorFromData\fR allows cursors to be created from
in-memory descriptions of their source and mask cursors.  \fISource\fR
points to standard cursor data for the cursor's source bits, and
\fImask\fR points to standard cursor data describing
which pixels of \fIsource\fR are to be drawn and which are to be
considered transparent.  \fIWidth\fR and \fIheight\fR give the
dimensions of the cursor, \fIxHot\fR and \fIyHot\fR indicate the
location of the cursor's hot-spot (the point that is reported when
an event occurs), and \fIfg\fR and \fIbg\fR describe the cursor's
foreground and background colors textually (any of the forms
suitable for \fBTk_GetColor\fR may be used).  Typically, the
arguments to \fBTk_GetCursorFromData\fR are created by including
a cursor file directly into the source code for a program, as in
the following example:
.CS
Tk_Cursor cursor;
#include "source.cursor"
#include "mask.cursor"
cursor = Tk_GetCursorFromData(interp, tkwin, source_bits,
	mask_bits, source_width, source_height, source_x_hot,
	source_y_hot, Tk_GetUid("red"), Tk_GetUid("blue"));
.CE
.PP
Under normal conditions \fBTk_GetCursorFromData\fR
will return an identifier for the requested cursor.  If an error
occurs in creating the cursor then \fBNone\fR is returned and an error
message will be stored in \fIinterp\fR's result.
.PP
\fBTk_AllocCursorFromObj\fR, \fBTk_GetCursor\fR, and
\fBTk_GetCursorFromData\fR maintain a
database of all the cursors they have created.  Whenever possible,
a call to \fBTk_AllocCursorFromObj\fR, \fBTk_GetCursor\fR, or
\fBTk_GetCursorFromData\fR will
return an existing cursor rather than creating a new one.  This
approach can substantially reduce server overhead, so the Tk
procedures should generally be used in preference to Xlib procedures
like \fBXCreateFontCursor\fR or \fBXCreatePixmapCursor\fR, which
create a new cursor on each call.  The Tk procedures are also more
portable than the lower-level X procedures.
.PP
The procedure \fBTk_NameOfCursor\fR is roughly the inverse of
\fBTk_GetCursor\fR.  If its \fIcursor\fR argument was created
by \fBTk_GetCursor\fR, then the return value is the \fIname\fR
argument that was passed to \fBTk_GetCursor\fR to create the
cursor.  If \fIcursor\fR was created by a call to \fBTk_GetCursorFromData\fR,
or by any other mechanism, then the return value is a hexadecimal string
giving the X identifier for the cursor.
Note:  the string returned by \fBTk_NameOfCursor\fR is
only guaranteed to persist until the next call to
\fBTk_NameOfCursor\fR.  Also, this call is not portable except for
cursors returned by \fBTk_GetCursor\fR.
.PP
.VS 8.1
When a cursor returned by \fBTk_AllocCursorFromObj\fR, \fBTk_GetCursor\fR,
or \fBTk_GetCursorFromData\fR
is no longer needed, \fBTk_FreeCursorFromObj\fR or
\fBTk_FreeCursor\fR should be called to release it.
For \fBTk_FreeCursorFromObj\fR the cursor to release is specified
with the same information used to create it; for
\fBTk_FreeCursor\fR the cursor to release is specified
with its Tk_Cursor token.
There should be exactly one call to \fBTk_FreeCursor\fR for
each call to \fBTk_AllocCursorFromObj\fR, \fBTk_GetCursor\fR,
or \fBTk_GetCursorFromData\fR.
.VE

.SH BUGS
In determining whether an existing cursor can be used to satisfy
a new request, \fBTk_AllocCursorFromObj\fR, \fBTk_GetCursor\fR,
and \fBTk_GetCursorFromData\fR
consider only the immediate values of their arguments.  For
example, when a file name is passed to \fBTk_GetCursor\fR,
\fBTk_GetCursor\fR will assume it is safe to re-use an existing
cursor created from the same file name:  it will not check to
see whether the file itself has changed, or whether the current
directory has changed, thereby causing the name to refer to
a different file.  Similarly, \fBTk_GetCursorFromData\fR assumes
that if the same \fIsource\fR pointer is used in two different calls,
then the pointers refer to the same data;  it does not check to
see if the actual data values have changed.

.SH KEYWORDS
cursor