'\"
'\" Copyright (c) 1990 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" RCS: @(#) $Id: CrtErrHdlr.3,v 1.2 1998/09/14 18:22:46 stanton Exp $
'\" 
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .CS
'\"	Begin code excerpt.
'\"
'\" .CE
'\"	End code excerpt.
'\"
'\" .VS ?version? ?br?
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.  The first argument is ignored and used for recording
'\"	the version when the .VS was added, so that the sidebars can be
'\"	found and removed when they reach a certain age.  If another argument
'\"	is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" .SO
'\"	Start of list of standard options for a Tk widget.  The
'\"	options follow on successive lines, in four columns separated
'\"	by tabs.
'\"
'\" .SE
'\"	End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\"	Start of description of a specific option.  cmdName gives the
'\"	option's name as specified in the class command, dbName gives
'\"	the option's name in the option database, and dbClass gives
'\"	the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\"	Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
'\"
'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
'\"	# SO - start of list of standard options
.de SO
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
'\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\fBoptions\\fR manual entry for details on the standard options.
..
'\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
'\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
'\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.de UL
\\$1\l'|0\(ul'\\$2
..
.TH Tk_CreateErrorHandler 3 "" Tk "Tk Library Procedures"
.BS
.SH NAME
Tk_CreateErrorHandler, Tk_DeleteErrorHandler \- handle X protocol errors
.SH SYNOPSIS
.nf
\fB#include <tk.h>\fR
.sp
Tk_ErrorHandler
\fBTk_CreateErrorHandler\fR(\fIdisplay, error, request, minor, proc, clientData\fR)
.sp
\fBTk_DeleteErrorHandler\fR(\fIhandler\fR)
.SH ARGUMENTS
.AS "Tk_ErrorHandler" clientData
.AP Display *display in
Display whose errors are to be handled.
.AP int error in
Match only error events with this value in the \fIerror_code\fR
field.  If -1, then match any \fIerror_code\fR value.
.AP int request in
Match only error events with this value in the \fIrequest_code\fR
field.  If -1, then match any \fIrequest_code\fR value.
.AP int minor in
Match only error events with this value in the \fIminor_code\fR
field.  If -1, then match any \fIminor_code\fR value.
.AP Tk_ErrorProc *proc in
Procedure to invoke whenever an error event is received for
\fIdisplay\fR and matches \fIerror\fR, \fIrequest\fR, and \fIminor\fR.
NULL means ignore any matching errors.
.AP ClientData clientData in
Arbitrary one-word value to pass to \fIproc\fR.
.AP Tk_ErrorHandler handler in
Token for error handler to delete (return value from a previous
call to \fBTk_CreateErrorHandler\fR).
.BE

.SH DESCRIPTION
.PP
\fBTk_CreateErrorHandler\fR arranges for a particular procedure
(\fIproc\fR) to be called whenever certain protocol errors occur on a
particular display (\fIdisplay\fR).  Protocol errors occur when
the X protocol is used incorrectly, such as attempting to map a window
that doesn't exist.  See the Xlib documentation for \fBXSetErrorHandler\fR
for more information on the kinds of errors that can occur.
For \fIproc\fR to be invoked
to handle a particular error, five things must occur:
.IP [1]
The error must pertain to \fIdisplay\fR.
.IP [2]
Either the \fIerror\fR argument to \fBTk_CreateErrorHandler\fR
must have been -1, or the \fIerror\fR argument must match
the \fIerror_code\fR field from the error event.
.IP [3]
Either the \fIrequest\fR argument to \fBTk_CreateErrorHandler\fR
must have been -1, or the \fIrequest\fR argument must match
the \fIrequest_code\fR field from the error event.
.IP [4]
Either the \fIminor\fR argument to \fBTk_CreateErrorHandler\fR
must have been -1, or the \fIminor\fR argument must match
the \fIminor_code\fR field from the error event.
.IP [5]
The protocol request to which the error pertains must have been
made when the handler was active (see below for more information).
.PP
\fIProc\fR should have arguments and result that match the
following type:
.CS
typedef int Tk_ErrorProc(
	ClientData \fIclientData\fR,
	XErrorEvent *\fIerrEventPtr\fR);
.CE
The \fIclientData\fR parameter to \fIproc\fR is a copy of the \fIclientData\fR
argument given to \fBTcl_CreateErrorHandler\fR when the callback
was created.  Typically, \fIclientData\fR points to a data
structure containing application-specific information that is
needed to deal with the error.  \fIErrEventPtr\fR is
a pointer to the X error event.
The procedure \fIproc\fR should return an integer value.  If it
returns 0 it means that \fIproc\fR handled the error completely and there
is no need to take any other action for the error.  If it returns
non-zero it means \fIproc\fR was unable to handle the error.
.PP
If a value of NULL is specified for \fIproc\fR, all matching errors
will be ignored:  this will produce the same result as if a procedure
had been specified that always returns 0.
.PP
If more than more than one handler matches a particular error, then
they are invoked in turn.  The handlers will be invoked in reverse
order of creation:  most recently declared handler first.
If any handler returns 0, then subsequent (older) handlers will
not be invoked.  If no handler returns 0, then Tk invokes X'es
default error handler, which prints an error message and aborts the
program.  If you wish to have a default handler that deals with errors
that no other handler can deal with, then declare it first.
.PP
The X documentation states that ``the error handler should not call
any functions (directly or indirectly) on the display that will
generate protocol requests or that will look for input events.''
This restriction applies to handlers declared by \fBTk_CreateErrorHandler\fR;
disobey it at your own risk.
.PP
\fBTk_DeleteErrorHandler\fR may be called to delete a
previously-created error handler.  The \fIhandler\fR argument
identifies the error handler, and should be a value returned by
a previous call to \fBTk_CreateEventHandler\fR.
.PP
A particular error handler applies to errors resulting
from protocol requests generated between
the call to \fBTk_CreateErrorHandler\fR and the call to
\fBTk_DeleteErrorHandler\fR.  However, the actual callback
to \fIproc\fR may not occur until after the \fBTk_DeleteErrorHandler\fR
call, due to buffering in the client and server.
If an error event pertains to
a protocol request made just before calling \fBTk_DeleteErrorHandler\fR,
then the error event may not have been processed
before the \fBTk_DeleteErrorHandler\fR
call.  When this situation arises, Tk will save information about
the handler and
invoke the handler's \fIproc\fR later when the error event
finally arrives.
If an application wishes to delete an error handler and know
for certain that all relevant errors have been processed,
it should first call \fBTk_DeleteErrorHandler\fR and then
call \fBXSync\fR;  this will flush out any buffered requests and errors,
but will result in a performance penalty because
it requires communication to and from the X server.  After the
\fBXSync\fR call Tk is guaranteed not to call any error
handlers deleted before the \fBXSync\fR call.
.PP
For the Tk error handling mechanism to work properly, it is essential
that application code never calls \fBXSetErrorHandler\fR directly;
applications should use only \fBTk_CreateErrorHandler\fR.

.SH KEYWORDS
callback, error, event, handler