'\"
'\" Copyright (c) 1995-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" RCS: @(#) $Id: Exit.3,v 1.4 2000/07/24 00:03:02 jenglish Exp $
'\" 
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .CS
'\"	Begin code excerpt.
'\"
'\" .CE
'\"	End code excerpt.
'\"
'\" .VS ?version? ?br?
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.  The first argument is ignored and used for recording
'\"	the version when the .VS was added, so that the sidebars can be
'\"	found and removed when they reach a certain age.  If another argument
'\"	is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" .SO
'\"	Start of list of standard options for a Tk widget.  The
'\"	options follow on successive lines, in four columns separated
'\"	by tabs.
'\"
'\" .SE
'\"	End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\"	Start of description of a specific option.  cmdName gives the
'\"	option's name as specified in the class command, dbName gives
'\"	the option's name in the option database, and dbClass gives
'\"	the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\"	Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
'\"
'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
'\"	# SO - start of list of standard options
.de SO
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
'\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\fBoptions\\fR manual entry for details on the standard options.
..
'\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
'\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
'\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.de UL
\\$1\l'|0\(ul'\\$2
..
.TH Tcl_Exit 3 8.1 Tcl "Tcl Library Procedures"
.BS
.SH NAME
Tcl_Exit, Tcl_Finalize, Tcl_CreateExitHandler, Tcl_DeleteExitHandler, Tcl_ExitThread, Tcl_FinalizeThread, Tcl_CreateThreadExitHandler, Tcl_DeleteThreadExitHandler \- end the application or thread (and invoke exit handlers)
.SH SYNOPSIS
.nf
\fB#include <tcl.h>\fR
.sp
\fBTcl_Exit\fR(\fIstatus\fR)
.sp
\fBTcl_Finalize\fR()
.sp
\fBTcl_CreateExitHandler\fR(\fIproc, clientData\fR)
.sp
\fBTcl_DeleteExitHandler\fR(\fIproc, clientData\fR)
.sp
\fBTcl_ExitThread\fR(\fIstatus\fR)
.sp
\fBTcl_FinalizeThread\fR()
.sp
\fBTcl_CreateThreadExitHandler\fR(\fIproc, clientData\fR)
.sp
\fBTcl_DeleteThreadExitHandler\fR(\fIproc, clientData\fR)
.SH ARGUMENTS
.AS Tcl_ExitProc clientData
.AP int status  in
Provides information about why the application or thread exited.
Exact meaning may
be platform-specific.  0 usually means a normal exit, any nonzero value
usually means that an error occurred.
.AP Tcl_ExitProc *proc in
Procedure to invoke before exiting application.
.AP ClientData clientData in
Arbitrary one-word value to pass to \fIproc\fR.
.BE

.SH DESCRIPTION
.PP
The procedures described here provide a graceful mechanism to end the
execution of a \fBTcl\fR application. Exit handlers are invoked to cleanup the
application's state before ending the execution of \fBTcl\fR code.
.PP
Invoke \fBTcl_Exit\fR to end a \fBTcl\fR application and to exit from this
process. This procedure is invoked by the \fBexit\fR command, and can be
invoked anyplace else to terminate the application.
No-one should ever invoke the \fBexit\fR system procedure directly;  always
invoke \fBTcl_Exit\fR instead, so that it can invoke exit handlers.
Note that if other code invokes \fBexit\fR system procedure directly, or
otherwise causes the application to terminate without calling
\fBTcl_Exit\fR, the exit handlers will not be run.
\fBTcl_Exit\fR internally invokes the \fBexit\fR system call, thus it never
returns control to its caller.
.PP
\fBTcl_Finalize\fR is similar to \fBTcl_Exit\fR except that it does not
exit from the current process.
It is useful for cleaning up when a process is finished using \fBTcl\fR but
wishes to continue executing, and when \fBTcl\fR is used in a dynamically
loaded extension that is about to be unloaded.
On some systems \fBTcl\fR is automatically notified when it is being
unloaded, and it calls \fBTcl_Finalize\fR internally; on these systems it
not necessary for the caller to explicitly call \fBTcl_Finalize\fR.
However, to ensure portability, your code should always invoke
\fBTcl_Finalize\fR when \fBTcl\fR is being unloaded, to ensure that the
code will work on all platforms. \fBTcl_Finalize\fR can be safely called
more than once.
.PP
.VS
\fBTcl_ExitThread\fR is used to terminate the current thread and invoke
per-thread exit handlers.  This finalization is done by
\fBTcl_FinalizeThread\fR, which you can call if you just want to clean
up per-thread state and invoke the thread exit handlers.
\fBTcl_Finalize\fR calls \fBTcl_FinalizeThread\fR for the current
thread automatically.
.VE
.PP
\fBTcl_CreateExitHandler\fR arranges for \fIproc\fR to be invoked
by \fBTcl_Finalize\fR and \fBTcl_Exit\fR.
\fBTcl_CreateThreadExitHandler\fR arranges for \fIproc\fR to be invoked
by \fBTcl_FinalizeThread\fR and \fBTcl_ExitThread\fR.
This provides a hook for cleanup operations such as flushing buffers
and freeing global memory.
\fIProc\fR should match the type \fBTcl_ExitProc\fR:
.CS
typedef void Tcl_ExitProc(ClientData \fIclientData\fR);
.CE
The \fIclientData\fR parameter to \fIproc\fR is a
copy of the \fIclientData\fR argument given to
\fBTcl_CreateExitHandler\fR or \fBTcl_CreateThreadExitHandler\fR when
the callback
was created.  Typically, \fIclientData\fR points to a data
structure containing application-specific information about
what to do in \fIproc\fR.
.PP
\fBTcl_DeleteExitHandler\fR and \fBTcl_DeleteThreadExitHandler\fR may be
called to delete a
previously-created exit handler.  It removes the handler
indicated by \fIproc\fR and \fIclientData\fR so that no call
to \fIproc\fR will be made.  If no such handler exists then
\fBTcl_DeleteExitHandler\fR or \fBTcl_DeleteThreadExitHandler\fR does nothing.
.PP
.VS
.PP
\fBTcl_Finalize\fR and \fBTcl_Exit\fR execute all registered exit handlers,
in reverse order from the order in which they were registered.
This matches the natural order in which extensions are loaded and unloaded;
if extension \fBA\fR loads extension \fBB\fR, it usually
unloads \fBB\fR before it itself is unloaded.
If extension \fBA\fR registers its exit handlers before loading extension
\fBB\fR, this ensures that any exit handlers for \fBB\fR will be executed
before the exit handlers for \fBA\fR.
.VE
.VS
.PP
\fBTcl_Finalize\fR and \fBTcl_Exit\fR call \fBTcl_FinalizeThread\fR 
and the thread exit handlers \fIafter\fR
the process-wide exit handlers.  This is because thread finalization shuts
down the I/O channel system, so any attempt at I/O by the global exit
handlers will vanish into the bitbucket.
.VE

.SH KEYWORDS
callback, cleanup, dynamic loading, end application, exit, unloading, thread