'\"
'\" Copyright (c) 1991-1994 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" RCS: @(#) $Id: wish.1,v 1.2 1998/09/14 18:23:01 stanton Exp $
'\" 
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .CS
'\"	Begin code excerpt.
'\"
'\" .CE
'\"	End code excerpt.
'\"
'\" .VS ?version? ?br?
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.  The first argument is ignored and used for recording
'\"	the version when the .VS was added, so that the sidebars can be
'\"	found and removed when they reach a certain age.  If another argument
'\"	is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" .SO
'\"	Start of list of standard options for a Tk widget.  The
'\"	options follow on successive lines, in four columns separated
'\"	by tabs.
'\"
'\" .SE
'\"	End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\"	Start of description of a specific option.  cmdName gives the
'\"	option's name as specified in the class command, dbName gives
'\"	the option's name in the option database, and dbClass gives
'\"	the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\"	Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
'\"
'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
'\"	# SO - start of list of standard options
.de SO
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
'\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\fBoptions\\fR manual entry for details on the standard options.
..
'\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
'\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
'\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.de UL
\\$1\l'|0\(ul'\\$2
..
.TH wish 1 8.0 Tk "Tk Applications"
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
wish \- Simple windowing shell
.SH SYNOPSIS
\fBwish\fR ?\fIfileName arg arg ...\fR?
.SH OPTIONS
.IP "\fB\-colormap \fInew\fR" 20
Specifies that the window should have a new private colormap instead of
using the default colormap for the screen.
.IP "\fB\-display \fIdisplay\fR" 20
Display (and screen) on which to display window.
.IP "\fB\-geometry \fIgeometry\fR" 20
Initial geometry to use for window.  If this option is specified, its
value is stored in the \fBgeometry\fR global variable of the application's
Tcl interpreter.
.IP "\fB\-name \fIname\fR" 20
Use \fIname\fR as the title to be displayed in the window, and
as the name of the interpreter for \fBsend\fR commands.
.IP "\fB\-sync\fR" 20
Execute all X server commands synchronously, so that errors
are reported immediately.  This will result in much slower
execution, but it is useful for debugging.
.VS 8.0 br
.IP "\fB\-use\fR \fIid\fR" 20
Specifies that the main window for the application is to be embedded in
the window whose identifier is \fIid\fR, instead of being created as an
independent toplevel window.  \fIId\fR must be specified in the same
way as the value for the \fB\-use\fR option for toplevel widgets (i.e.
it has a form like that returned by the \fBwinfo id\fR command).
.VE
.IP "\fB\-visual \fIvisual\fR" 20
Specifies the visual to use for the window.
\fIVisual\fR may have any of the forms supported by the \fBTk_GetVisual\fR
procedure.
.IP "\fB\-\|\-\fR" 20
Pass all remaining arguments through to the script's \fBargv\fR
variable without interpreting them.
This provides a mechanism for passing arguments such as \fB\-name\fR
to a script instead of having \fBwish\fR interpret them.
.BE

.SH DESCRIPTION
.PP
\fBWish\fR is a simple program consisting of the Tcl command
language, the Tk toolkit, and a main program that reads commands
from standard input or from a file.
It creates a main window and then processes Tcl commands.
If \fBwish\fR is invoked with no arguments, or with a first argument
that starts with ``\-'', then it reads Tcl commands interactively from
standard input.
It will continue processing commands until all windows have been
deleted or until end-of-file is reached on standard input.
If there exists a file \fB.wishrc\fR in the home directory of
the user, \fBwish\fR evaluates the file as a Tcl script
just before reading the first command from standard input.
.PP
If \fBwish\fR is invoked with an initial \fIfileName\fR argument, then 
\fIfileName\fR is treated as the name of a script file.
\fBWish\fR will evaluate the script in \fIfileName\fR (which
presumably creates a user interface), then it will respond to events
until all windows have been deleted.
Commands will not be read from standard input.
There is no automatic evaluation of \fB.wishrc\fR in this
case, but the script file can always \fBsource\fR it if desired.

.SH "OPTIONS"
.PP
\fBWish\fR automatically processes all of the command-line options
described in the \fBOPTIONS\fR summary above.
Any other command-line arguments besides these are passed through
to the application using the \fBargc\fR and \fBargv\fR variables
described later.

.SH "APPLICATION NAME AND CLASS"
.PP
The name of the application, which is used for purposes such as
\fBsend\fR commands, is taken from the \fB\-name\fR option,
if it is specified;  otherwise it is taken from \fIfileName\fR,
if it is specified, or from the command name by which
\fBwish\fR was invoked.  In the last two cases, if the name contains a ``/''
character, then only the characters after the last slash are used
as the application name.
.PP
The class of the application, which is used for purposes such as
specifying options with a \fBRESOURCE_MANAGER\fR property or .Xdefaults
file, is the same as its name except that the first letter is
capitalized.

.SH "VARIABLES"
.PP
\fBWish\fR sets the following Tcl variables:
.TP 15
\fBargc\fR
Contains a count of the number of \fIarg\fR arguments (0 if none),
not including the options described above.
.TP 15
\fBargv\fR
Contains a Tcl list whose elements are the \fIarg\fR arguments
that follow a \fB\-\|\-\fR option or don't match any of the
options described in OPTIONS above, in order, or an empty string
if there are no such arguments.
.TP 15
\fBargv0\fR
Contains \fIfileName\fR if it was specified.
Otherwise, contains the name by which \fBwish\fR was invoked.
.TP 15
\fBgeometry\fR
If the \fB\-geometry\fR option is specified, \fBwish\fR copies its
value into this variable.  If the variable still exists after
\fIfileName\fR has been evaluated, \fBwish\fR uses the value of
the variable in a \fBwm geometry\fR command to set the main
window's geometry.
.TP 15
\fBtcl_interactive\fR
Contains 1 if \fBwish\fR is reading commands interactively (\fIfileName\fR
was not specified and standard input is a terminal-like
device), 0 otherwise.

.SH "SCRIPT FILES"
.PP
If you create a Tcl script in a file whose first line is
.CS
\fB#!/usr/local/bin/wish\fR
.CE
then you can invoke the script file directly from your shell if
you mark it as executable.
This assumes that \fBwish\fR has been installed in the default
location in /usr/local/bin;  if it's installed somewhere else
then you'll have to modify the above line to match.
Many UNIX systems do not allow the \fB#!\fR line to exceed about
30 characters in length, so be sure that the \fBwish\fR executable
can be accessed with a short file name.
.PP
An even better approach is to start your script files with the
following three lines:
.CS
\fB#!/bin/sh
# the next line restarts using wish \e
exec wish "$0" "$@"\fR
.CE
This approach has three advantages over the approach in the previous
paragraph.  First, the location of the \fBwish\fR binary doesn't have
to be hard-wired into the script:  it can be anywhere in your shell
search path.  Second, it gets around the 30-character file name limit
in the previous approach.
Third, this approach will work even if \fBwish\fR is
itself a shell script (this is done on some systems in order to
handle multiple architectures or operating systems:  the \fBwish\fR
script selects one of several binaries to run).  The three lines
cause both \fBsh\fR and \fBwish\fR to process the script, but the
\fBexec\fR is only executed by \fBsh\fR.
\fBsh\fR processes the script first;  it treats the second
line as a comment and executes the third line.
The \fBexec\fR statement cause the shell to stop processing and
instead to start up \fBwish\fR to reprocess the entire script.
When \fBwish\fR starts up, it treats all three lines as comments,
since the backslash at the end of the second line causes the third
line to be treated as part of the comment on the second line.

.SH PROMPTS
.PP
When \fBwish\fR is invoked interactively it normally prompts for each
command with ``\fB% \fR''.  You can change the prompt by setting the
variables \fBtcl_prompt1\fR and \fBtcl_prompt2\fR.  If variable
\fBtcl_prompt1\fR exists then it must consist of a Tcl script
to output a prompt;  instead of outputting a prompt \fBwish\fR
will evaluate the script in \fBtcl_prompt1\fR.
The variable \fBtcl_prompt2\fR is used in a similar way when
a newline is typed but the current command isn't yet complete;
if \fBtcl_prompt2\fR isn't set then no prompt is output for
incomplete commands.

.SH KEYWORDS
shell, toolkit