This is libc.info, produced by makeinfo version 5.2 from libc.texinfo.

This file documents the GNU C Library.

   This is 'The GNU C Library Reference Manual', for version 2.19
(Buildroot).

   Copyright (C) 1993-2014 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Free Software Needs Free Documentation" and
"GNU Lesser General Public License", the Front-Cover texts being "A GNU
Manual", and with the Back-Cover Texts as in (a) below.  A copy of the
license is included in the section entitled "GNU Free Documentation
License".

   (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
modify this GNU manual.  Buying copies from the FSF supports it in
developing GNU and promoting software freedom."
INFO-DIR-SECTION Software libraries
START-INFO-DIR-ENTRY
* Libc: (libc).                 C library.
END-INFO-DIR-ENTRY

INFO-DIR-SECTION GNU C library functions and macros
START-INFO-DIR-ENTRY
* ALTWERASE: (libc)Local Modes.
* ARGP_ERR_UNKNOWN: (libc)Argp Parser Functions.
* ARG_MAX: (libc)General Limits.
* BC_BASE_MAX: (libc)Utility Limits.
* BC_DIM_MAX: (libc)Utility Limits.
* BC_SCALE_MAX: (libc)Utility Limits.
* BC_STRING_MAX: (libc)Utility Limits.
* BRKINT: (libc)Input Modes.
* BUFSIZ: (libc)Controlling Buffering.
* CCTS_OFLOW: (libc)Control Modes.
* CHILD_MAX: (libc)General Limits.
* CIGNORE: (libc)Control Modes.
* CLK_TCK: (libc)Processor Time.
* CLOCAL: (libc)Control Modes.
* CLOCKS_PER_SEC: (libc)CPU Time.
* COLL_WEIGHTS_MAX: (libc)Utility Limits.
* CPU_CLR: (libc)CPU Affinity.
* CPU_ISSET: (libc)CPU Affinity.
* CPU_SET: (libc)CPU Affinity.
* CPU_SETSIZE: (libc)CPU Affinity.
* CPU_ZERO: (libc)CPU Affinity.
* CREAD: (libc)Control Modes.
* CRTS_IFLOW: (libc)Control Modes.
* CS5: (libc)Control Modes.
* CS6: (libc)Control Modes.
* CS7: (libc)Control Modes.
* CS8: (libc)Control Modes.
* CSIZE: (libc)Control Modes.
* CSTOPB: (libc)Control Modes.
* DES_FAILED: (libc)DES Encryption.
* DTTOIF: (libc)Directory Entries.
* E2BIG: (libc)Error Codes.
* EACCES: (libc)Error Codes.
* EADDRINUSE: (libc)Error Codes.
* EADDRNOTAVAIL: (libc)Error Codes.
* EADV: (libc)Error Codes.
* EAFNOSUPPORT: (libc)Error Codes.
* EAGAIN: (libc)Error Codes.
* EALREADY: (libc)Error Codes.
* EAUTH: (libc)Error Codes.
* EBACKGROUND: (libc)Error Codes.
* EBADE: (libc)Error Codes.
* EBADF: (libc)Error Codes.
* EBADFD: (libc)Error Codes.
* EBADMSG: (libc)Error Codes.
* EBADR: (libc)Error Codes.
* EBADRPC: (libc)Error Codes.
* EBADRQC: (libc)Error Codes.
* EBADSLT: (libc)Error Codes.
* EBFONT: (libc)Error Codes.
* EBUSY: (libc)Error Codes.
* ECANCELED: (libc)Error Codes.
* ECHILD: (libc)Error Codes.
* ECHO: (libc)Local Modes.
* ECHOCTL: (libc)Local Modes.
* ECHOE: (libc)Local Modes.
* ECHOK: (libc)Local Modes.
* ECHOKE: (libc)Local Modes.
* ECHONL: (libc)Local Modes.
* ECHOPRT: (libc)Local Modes.
* ECHRNG: (libc)Error Codes.
* ECOMM: (libc)Error Codes.
* ECONNABORTED: (libc)Error Codes.
* ECONNREFUSED: (libc)Error Codes.
* ECONNRESET: (libc)Error Codes.
* ED: (libc)Error Codes.
* EDEADLK: (libc)Error Codes.
* EDEADLOCK: (libc)Error Codes.
* EDESTADDRREQ: (libc)Error Codes.
* EDIED: (libc)Error Codes.
* EDOM: (libc)Error Codes.
* EDOTDOT: (libc)Error Codes.
* EDQUOT: (libc)Error Codes.
* EEXIST: (libc)Error Codes.
* EFAULT: (libc)Error Codes.
* EFBIG: (libc)Error Codes.
* EFTYPE: (libc)Error Codes.
* EGRATUITOUS: (libc)Error Codes.
* EGREGIOUS: (libc)Error Codes.
* EHOSTDOWN: (libc)Error Codes.
* EHOSTUNREACH: (libc)Error Codes.
* EHWPOISON: (libc)Error Codes.
* EIDRM: (libc)Error Codes.
* EIEIO: (libc)Error Codes.
* EILSEQ: (libc)Error Codes.
* EINPROGRESS: (libc)Error Codes.
* EINTR: (libc)Error Codes.
* EINVAL: (libc)Error Codes.
* EIO: (libc)Error Codes.
* EISCONN: (libc)Error Codes.
* EISDIR: (libc)Error Codes.
* EISNAM: (libc)Error Codes.
* EKEYEXPIRED: (libc)Error Codes.
* EKEYREJECTED: (libc)Error Codes.
* EKEYREVOKED: (libc)Error Codes.
* EL2HLT: (libc)Error Codes.
* EL2NSYNC: (libc)Error Codes.
* EL3HLT: (libc)Error Codes.
* EL3RST: (libc)Error Codes.
* ELIBACC: (libc)Error Codes.
* ELIBBAD: (libc)Error Codes.
* ELIBEXEC: (libc)Error Codes.
* ELIBMAX: (libc)Error Codes.
* ELIBSCN: (libc)Error Codes.
* ELNRNG: (libc)Error Codes.
* ELOOP: (libc)Error Codes.
* EMEDIUMTYPE: (libc)Error Codes.
* EMFILE: (libc)Error Codes.
* EMLINK: (libc)Error Codes.
* EMSGSIZE: (libc)Error Codes.
* EMULTIHOP: (libc)Error Codes.
* ENAMETOOLONG: (libc)Error Codes.
* ENAVAIL: (libc)Error Codes.
* ENEEDAUTH: (libc)Error Codes.
* ENETDOWN: (libc)Error Codes.
* ENETRESET: (libc)Error Codes.
* ENETUNREACH: (libc)Error Codes.
* ENFILE: (libc)Error Codes.
* ENOANO: (libc)Error Codes.
* ENOBUFS: (libc)Error Codes.
* ENOCSI: (libc)Error Codes.
* ENODATA: (libc)Error Codes.
* ENODEV: (libc)Error Codes.
* ENOENT: (libc)Error Codes.
* ENOEXEC: (libc)Error Codes.
* ENOKEY: (libc)Error Codes.
* ENOLCK: (libc)Error Codes.
* ENOLINK: (libc)Error Codes.
* ENOMEDIUM: (libc)Error Codes.
* ENOMEM: (libc)Error Codes.
* ENOMSG: (libc)Error Codes.
* ENONET: (libc)Error Codes.
* ENOPKG: (libc)Error Codes.
* ENOPROTOOPT: (libc)Error Codes.
* ENOSPC: (libc)Error Codes.
* ENOSR: (libc)Error Codes.
* ENOSTR: (libc)Error Codes.
* ENOSYS: (libc)Error Codes.
* ENOTBLK: (libc)Error Codes.
* ENOTCONN: (libc)Error Codes.
* ENOTDIR: (libc)Error Codes.
* ENOTEMPTY: (libc)Error Codes.
* ENOTNAM: (libc)Error Codes.
* ENOTRECOVERABLE: (libc)Error Codes.
* ENOTSOCK: (libc)Error Codes.
* ENOTSUP: (libc)Error Codes.
* ENOTTY: (libc)Error Codes.
* ENOTUNIQ: (libc)Error Codes.
* ENXIO: (libc)Error Codes.
* EOF: (libc)EOF and Errors.
* EOPNOTSUPP: (libc)Error Codes.
* EOVERFLOW: (libc)Error Codes.
* EOWNERDEAD: (libc)Error Codes.
* EPERM: (libc)Error Codes.
* EPFNOSUPPORT: (libc)Error Codes.
* EPIPE: (libc)Error Codes.
* EPROCLIM: (libc)Error Codes.
* EPROCUNAVAIL: (libc)Error Codes.
* EPROGMISMATCH: (libc)Error Codes.
* EPROGUNAVAIL: (libc)Error Codes.
* EPROTO: (libc)Error Codes.
* EPROTONOSUPPORT: (libc)Error Codes.
* EPROTOTYPE: (libc)Error Codes.
* EQUIV_CLASS_MAX: (libc)Utility Limits.
* ERANGE: (libc)Error Codes.
* EREMCHG: (libc)Error Codes.
* EREMOTE: (libc)Error Codes.
* EREMOTEIO: (libc)Error Codes.
* ERESTART: (libc)Error Codes.
* ERFKILL: (libc)Error Codes.
* EROFS: (libc)Error Codes.
* ERPCMISMATCH: (libc)Error Codes.
* ESHUTDOWN: (libc)Error Codes.
* ESOCKTNOSUPPORT: (libc)Error Codes.
* ESPIPE: (libc)Error Codes.
* ESRCH: (libc)Error Codes.
* ESRMNT: (libc)Error Codes.
* ESTALE: (libc)Error Codes.
* ESTRPIPE: (libc)Error Codes.
* ETIME: (libc)Error Codes.
* ETIMEDOUT: (libc)Error Codes.
* ETOOMANYREFS: (libc)Error Codes.
* ETXTBSY: (libc)Error Codes.
* EUCLEAN: (libc)Error Codes.
* EUNATCH: (libc)Error Codes.
* EUSERS: (libc)Error Codes.
* EWOULDBLOCK: (libc)Error Codes.
* EXDEV: (libc)Error Codes.
* EXFULL: (libc)Error Codes.
* EXIT_FAILURE: (libc)Exit Status.
* EXIT_SUCCESS: (libc)Exit Status.
* EXPR_NEST_MAX: (libc)Utility Limits.
* FD_CLOEXEC: (libc)Descriptor Flags.
* FD_CLR: (libc)Waiting for I/O.
* FD_ISSET: (libc)Waiting for I/O.
* FD_SET: (libc)Waiting for I/O.
* FD_SETSIZE: (libc)Waiting for I/O.
* FD_ZERO: (libc)Waiting for I/O.
* FILENAME_MAX: (libc)Limits for Files.
* FLUSHO: (libc)Local Modes.
* FOPEN_MAX: (libc)Opening Streams.
* FP_ILOGB0: (libc)Exponents and Logarithms.
* FP_ILOGBNAN: (libc)Exponents and Logarithms.
* F_DUPFD: (libc)Duplicating Descriptors.
* F_GETFD: (libc)Descriptor Flags.
* F_GETFL: (libc)Getting File Status Flags.
* F_GETLK: (libc)File Locks.
* F_GETOWN: (libc)Interrupt Input.
* F_OK: (libc)Testing File Access.
* F_SETFD: (libc)Descriptor Flags.
* F_SETFL: (libc)Getting File Status Flags.
* F_SETLK: (libc)File Locks.
* F_SETLKW: (libc)File Locks.
* F_SETOWN: (libc)Interrupt Input.
* HUGE_VAL: (libc)Math Error Reporting.
* HUGE_VALF: (libc)Math Error Reporting.
* HUGE_VALL: (libc)Math Error Reporting.
* HUPCL: (libc)Control Modes.
* I: (libc)Complex Numbers.
* ICANON: (libc)Local Modes.
* ICRNL: (libc)Input Modes.
* IEXTEN: (libc)Local Modes.
* IFNAMSIZ: (libc)Interface Naming.
* IFTODT: (libc)Directory Entries.
* IGNBRK: (libc)Input Modes.
* IGNCR: (libc)Input Modes.
* IGNPAR: (libc)Input Modes.
* IMAXBEL: (libc)Input Modes.
* INADDR_ANY: (libc)Host Address Data Type.
* INADDR_BROADCAST: (libc)Host Address Data Type.
* INADDR_LOOPBACK: (libc)Host Address Data Type.
* INADDR_NONE: (libc)Host Address Data Type.
* INFINITY: (libc)Infinity and NaN.
* INLCR: (libc)Input Modes.
* INPCK: (libc)Input Modes.
* IPPORT_RESERVED: (libc)Ports.
* IPPORT_USERRESERVED: (libc)Ports.
* ISIG: (libc)Local Modes.
* ISTRIP: (libc)Input Modes.
* IXANY: (libc)Input Modes.
* IXOFF: (libc)Input Modes.
* IXON: (libc)Input Modes.
* LINE_MAX: (libc)Utility Limits.
* LINK_MAX: (libc)Limits for Files.
* L_ctermid: (libc)Identifying the Terminal.
* L_cuserid: (libc)Who Logged In.
* L_tmpnam: (libc)Temporary Files.
* MAXNAMLEN: (libc)Limits for Files.
* MAXSYMLINKS: (libc)Symbolic Links.
* MAX_CANON: (libc)Limits for Files.
* MAX_INPUT: (libc)Limits for Files.
* MB_CUR_MAX: (libc)Selecting the Conversion.
* MB_LEN_MAX: (libc)Selecting the Conversion.
* MDMBUF: (libc)Control Modes.
* MSG_DONTROUTE: (libc)Socket Data Options.
* MSG_OOB: (libc)Socket Data Options.
* MSG_PEEK: (libc)Socket Data Options.
* NAME_MAX: (libc)Limits for Files.
* NAN: (libc)Infinity and NaN.
* NCCS: (libc)Mode Data Types.
* NGROUPS_MAX: (libc)General Limits.
* NOFLSH: (libc)Local Modes.
* NOKERNINFO: (libc)Local Modes.
* NSIG: (libc)Standard Signals.
* NULL: (libc)Null Pointer Constant.
* ONLCR: (libc)Output Modes.
* ONOEOT: (libc)Output Modes.
* OPEN_MAX: (libc)General Limits.
* OPOST: (libc)Output Modes.
* OXTABS: (libc)Output Modes.
* O_ACCMODE: (libc)Access Modes.
* O_APPEND: (libc)Operating Modes.
* O_ASYNC: (libc)Operating Modes.
* O_CREAT: (libc)Open-time Flags.
* O_EXCL: (libc)Open-time Flags.
* O_EXEC: (libc)Access Modes.
* O_EXLOCK: (libc)Open-time Flags.
* O_FSYNC: (libc)Operating Modes.
* O_IGNORE_CTTY: (libc)Open-time Flags.
* O_NDELAY: (libc)Operating Modes.
* O_NOATIME: (libc)Operating Modes.
* O_NOCTTY: (libc)Open-time Flags.
* O_NOLINK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Operating Modes.
* O_NOTRANS: (libc)Open-time Flags.
* O_RDONLY: (libc)Access Modes.
* O_RDWR: (libc)Access Modes.
* O_READ: (libc)Access Modes.
* O_SHLOCK: (libc)Open-time Flags.
* O_SYNC: (libc)Operating Modes.
* O_TRUNC: (libc)Open-time Flags.
* O_WRITE: (libc)Access Modes.
* O_WRONLY: (libc)Access Modes.
* PARENB: (libc)Control Modes.
* PARMRK: (libc)Input Modes.
* PARODD: (libc)Control Modes.
* PATH_MAX: (libc)Limits for Files.
* PA_FLAG_MASK: (libc)Parsing a Template String.
* PENDIN: (libc)Local Modes.
* PF_FILE: (libc)Local Namespace Details.
* PF_INET6: (libc)Internet Namespace.
* PF_INET: (libc)Internet Namespace.
* PF_LOCAL: (libc)Local Namespace Details.
* PF_UNIX: (libc)Local Namespace Details.
* PIPE_BUF: (libc)Limits for Files.
* P_tmpdir: (libc)Temporary Files.
* RAND_MAX: (libc)ISO Random.
* RE_DUP_MAX: (libc)General Limits.
* RLIM_INFINITY: (libc)Limits on Resources.
* R_OK: (libc)Testing File Access.
* SA_NOCLDSTOP: (libc)Flags for Sigaction.
* SA_ONSTACK: (libc)Flags for Sigaction.
* SA_RESTART: (libc)Flags for Sigaction.
* SEEK_CUR: (libc)File Positioning.
* SEEK_END: (libc)File Positioning.
* SEEK_SET: (libc)File Positioning.
* SIGABRT: (libc)Program Error Signals.
* SIGALRM: (libc)Alarm Signals.
* SIGBUS: (libc)Program Error Signals.
* SIGCHLD: (libc)Job Control Signals.
* SIGCLD: (libc)Job Control Signals.
* SIGCONT: (libc)Job Control Signals.
* SIGEMT: (libc)Program Error Signals.
* SIGFPE: (libc)Program Error Signals.
* SIGHUP: (libc)Termination Signals.
* SIGILL: (libc)Program Error Signals.
* SIGINFO: (libc)Miscellaneous Signals.
* SIGINT: (libc)Termination Signals.
* SIGIO: (libc)Asynchronous I/O Signals.
* SIGIOT: (libc)Program Error Signals.
* SIGKILL: (libc)Termination Signals.
* SIGLOST: (libc)Operation Error Signals.
* SIGPIPE: (libc)Operation Error Signals.
* SIGPOLL: (libc)Asynchronous I/O Signals.
* SIGPROF: (libc)Alarm Signals.
* SIGQUIT: (libc)Termination Signals.
* SIGSEGV: (libc)Program Error Signals.
* SIGSTOP: (libc)Job Control Signals.
* SIGSYS: (libc)Program Error Signals.
* SIGTERM: (libc)Termination Signals.
* SIGTRAP: (libc)Program Error Signals.
* SIGTSTP: (libc)Job Control Signals.
* SIGTTIN: (libc)Job Control Signals.
* SIGTTOU: (libc)Job Control Signals.
* SIGURG: (libc)Asynchronous I/O Signals.
* SIGUSR1: (libc)Miscellaneous Signals.
* SIGUSR2: (libc)Miscellaneous Signals.
* SIGVTALRM: (libc)Alarm Signals.
* SIGWINCH: (libc)Miscellaneous Signals.
* SIGXCPU: (libc)Operation Error Signals.
* SIGXFSZ: (libc)Operation Error Signals.
* SIG_ERR: (libc)Basic Signal Handling.
* SOCK_DGRAM: (libc)Communication Styles.
* SOCK_RAW: (libc)Communication Styles.
* SOCK_RDM: (libc)Communication Styles.
* SOCK_SEQPACKET: (libc)Communication Styles.
* SOCK_STREAM: (libc)Communication Styles.
* SOL_SOCKET: (libc)Socket-Level Options.
* SSIZE_MAX: (libc)General Limits.
* STREAM_MAX: (libc)General Limits.
* SUN_LEN: (libc)Local Namespace Details.
* SV_INTERRUPT: (libc)BSD Handler.
* SV_ONSTACK: (libc)BSD Handler.
* SV_RESETHAND: (libc)BSD Handler.
* S_IFMT: (libc)Testing File Type.
* S_ISBLK: (libc)Testing File Type.
* S_ISCHR: (libc)Testing File Type.
* S_ISDIR: (libc)Testing File Type.
* S_ISFIFO: (libc)Testing File Type.
* S_ISLNK: (libc)Testing File Type.
* S_ISREG: (libc)Testing File Type.
* S_ISSOCK: (libc)Testing File Type.
* S_TYPEISMQ: (libc)Testing File Type.
* S_TYPEISSEM: (libc)Testing File Type.
* S_TYPEISSHM: (libc)Testing File Type.
* TMP_MAX: (libc)Temporary Files.
* TOSTOP: (libc)Local Modes.
* TZNAME_MAX: (libc)General Limits.
* VDISCARD: (libc)Other Special.
* VDSUSP: (libc)Signal Characters.
* VEOF: (libc)Editing Characters.
* VEOL2: (libc)Editing Characters.
* VEOL: (libc)Editing Characters.
* VERASE: (libc)Editing Characters.
* VINTR: (libc)Signal Characters.
* VKILL: (libc)Editing Characters.
* VLNEXT: (libc)Other Special.
* VMIN: (libc)Noncanonical Input.
* VQUIT: (libc)Signal Characters.
* VREPRINT: (libc)Editing Characters.
* VSTART: (libc)Start/Stop Characters.
* VSTATUS: (libc)Other Special.
* VSTOP: (libc)Start/Stop Characters.
* VSUSP: (libc)Signal Characters.
* VTIME: (libc)Noncanonical Input.
* VWERASE: (libc)Editing Characters.
* WCHAR_MAX: (libc)Extended Char Intro.
* WCHAR_MIN: (libc)Extended Char Intro.
* WCOREDUMP: (libc)Process Completion Status.
* WEOF: (libc)EOF and Errors.
* WEOF: (libc)Extended Char Intro.
* WEXITSTATUS: (libc)Process Completion Status.
* WIFEXITED: (libc)Process Completion Status.
* WIFSIGNALED: (libc)Process Completion Status.
* WIFSTOPPED: (libc)Process Completion Status.
* WSTOPSIG: (libc)Process Completion Status.
* WTERMSIG: (libc)Process Completion Status.
* W_OK: (libc)Testing File Access.
* X_OK: (libc)Testing File Access.
* _Complex_I: (libc)Complex Numbers.
* _Exit: (libc)Termination Internals.
* _IOFBF: (libc)Controlling Buffering.
* _IOLBF: (libc)Controlling Buffering.
* _IONBF: (libc)Controlling Buffering.
* _Imaginary_I: (libc)Complex Numbers.
* _PATH_UTMP: (libc)Manipulating the Database.
* _PATH_WTMP: (libc)Manipulating the Database.
* _POSIX2_C_DEV: (libc)System Options.
* _POSIX2_C_VERSION: (libc)Version Supported.
* _POSIX2_FORT_DEV: (libc)System Options.
* _POSIX2_FORT_RUN: (libc)System Options.
* _POSIX2_LOCALEDEF: (libc)System Options.
* _POSIX2_SW_DEV: (libc)System Options.
* _POSIX_CHOWN_RESTRICTED: (libc)Options for Files.
* _POSIX_JOB_CONTROL: (libc)System Options.
* _POSIX_NO_TRUNC: (libc)Options for Files.
* _POSIX_SAVED_IDS: (libc)System Options.
* _POSIX_VDISABLE: (libc)Options for Files.
* _POSIX_VERSION: (libc)Version Supported.
* __fbufsize: (libc)Controlling Buffering.
* __flbf: (libc)Controlling Buffering.
* __fpending: (libc)Controlling Buffering.
* __fpurge: (libc)Flushing Buffers.
* __freadable: (libc)Opening Streams.
* __freading: (libc)Opening Streams.
* __fsetlocking: (libc)Streams and Threads.
* __fwritable: (libc)Opening Streams.
* __fwriting: (libc)Opening Streams.
* __gconv_end_fct: (libc)glibc iconv Implementation.
* __gconv_fct: (libc)glibc iconv Implementation.
* __gconv_init_fct: (libc)glibc iconv Implementation.
* __ppc_get_timebase: (libc)PowerPC.
* __ppc_get_timebase_freq: (libc)PowerPC.
* __ppc_mdoio: (libc)PowerPC.
* __ppc_mdoom: (libc)PowerPC.
* __ppc_set_ppr_low: (libc)PowerPC.
* __ppc_set_ppr_med: (libc)PowerPC.
* __ppc_set_ppr_med_low: (libc)PowerPC.
* __ppc_yield: (libc)PowerPC.
* __va_copy: (libc)Argument Macros.
* _exit: (libc)Termination Internals.
* _flushlbf: (libc)Flushing Buffers.
* _tolower: (libc)Case Conversion.
* _toupper: (libc)Case Conversion.
* a64l: (libc)Encode Binary Data.
* abort: (libc)Aborting a Program.
* abs: (libc)Absolute Value.
* accept: (libc)Accepting Connections.
* access: (libc)Testing File Access.
* acos: (libc)Inverse Trig Functions.
* acosf: (libc)Inverse Trig Functions.
* acosh: (libc)Hyperbolic Functions.
* acoshf: (libc)Hyperbolic Functions.
* acoshl: (libc)Hyperbolic Functions.
* acosl: (libc)Inverse Trig Functions.
* addmntent: (libc)mtab.
* addseverity: (libc)Adding Severity Classes.
* adjtime: (libc)High-Resolution Calendar.
* adjtimex: (libc)High-Resolution Calendar.
* aio_cancel64: (libc)Cancel AIO Operations.
* aio_cancel: (libc)Cancel AIO Operations.
* aio_error64: (libc)Status of AIO Operations.
* aio_error: (libc)Status of AIO Operations.
* aio_fsync64: (libc)Synchronizing AIO Operations.
* aio_fsync: (libc)Synchronizing AIO Operations.
* aio_init: (libc)Configuration of AIO.
* aio_read64: (libc)Asynchronous Reads/Writes.
* aio_read: (libc)Asynchronous Reads/Writes.
* aio_return64: (libc)Status of AIO Operations.
* aio_return: (libc)Status of AIO Operations.
* aio_suspend64: (libc)Synchronizing AIO Operations.
* aio_suspend: (libc)Synchronizing AIO Operations.
* aio_write64: (libc)Asynchronous Reads/Writes.
* aio_write: (libc)Asynchronous Reads/Writes.
* alarm: (libc)Setting an Alarm.
* aligned_alloc: (libc)Aligned Memory Blocks.
* alloca: (libc)Variable Size Automatic.
* alphasort64: (libc)Scanning Directory Content.
* alphasort: (libc)Scanning Directory Content.
* argp_error: (libc)Argp Helper Functions.
* argp_failure: (libc)Argp Helper Functions.
* argp_help: (libc)Argp Help.
* argp_parse: (libc)Argp.
* argp_state_help: (libc)Argp Helper Functions.
* argp_usage: (libc)Argp Helper Functions.
* argz_add: (libc)Argz Functions.
* argz_add_sep: (libc)Argz Functions.
* argz_append: (libc)Argz Functions.
* argz_count: (libc)Argz Functions.
* argz_create: (libc)Argz Functions.
* argz_create_sep: (libc)Argz Functions.
* argz_delete: (libc)Argz Functions.
* argz_extract: (libc)Argz Functions.
* argz_insert: (libc)Argz Functions.
* argz_next: (libc)Argz Functions.
* argz_replace: (libc)Argz Functions.
* argz_stringify: (libc)Argz Functions.
* asctime: (libc)Formatting Calendar Time.
* asctime_r: (libc)Formatting Calendar Time.
* asin: (libc)Inverse Trig Functions.
* asinf: (libc)Inverse Trig Functions.
* asinh: (libc)Hyperbolic Functions.
* asinhf: (libc)Hyperbolic Functions.
* asinhl: (libc)Hyperbolic Functions.
* asinl: (libc)Inverse Trig Functions.
* asprintf: (libc)Dynamic Output.
* assert: (libc)Consistency Checking.
* assert_perror: (libc)Consistency Checking.
* atan2: (libc)Inverse Trig Functions.
* atan2f: (libc)Inverse Trig Functions.
* atan2l: (libc)Inverse Trig Functions.
* atan: (libc)Inverse Trig Functions.
* atanf: (libc)Inverse Trig Functions.
* atanh: (libc)Hyperbolic Functions.
* atanhf: (libc)Hyperbolic Functions.
* atanhl: (libc)Hyperbolic Functions.
* atanl: (libc)Inverse Trig Functions.
* atexit: (libc)Cleanups on Exit.
* atof: (libc)Parsing of Floats.
* atoi: (libc)Parsing of Integers.
* atol: (libc)Parsing of Integers.
* atoll: (libc)Parsing of Integers.
* backtrace: (libc)Backtraces.
* backtrace_symbols: (libc)Backtraces.
* backtrace_symbols_fd: (libc)Backtraces.
* basename: (libc)Finding Tokens in a String.
* basename: (libc)Finding Tokens in a String.
* bcmp: (libc)String/Array Comparison.
* bcopy: (libc)Copying and Concatenation.
* bind: (libc)Setting Address.
* bind_textdomain_codeset: (libc)Charset conversion in gettext.
* bindtextdomain: (libc)Locating gettext catalog.
* brk: (libc)Resizing the Data Segment.
* bsearch: (libc)Array Search Function.
* btowc: (libc)Converting a Character.
* bzero: (libc)Copying and Concatenation.
* cabs: (libc)Absolute Value.
* cabsf: (libc)Absolute Value.
* cabsl: (libc)Absolute Value.
* cacos: (libc)Inverse Trig Functions.
* cacosf: (libc)Inverse Trig Functions.
* cacosh: (libc)Hyperbolic Functions.
* cacoshf: (libc)Hyperbolic Functions.
* cacoshl: (libc)Hyperbolic Functions.
* cacosl: (libc)Inverse Trig Functions.
* calloc: (libc)Allocating Cleared Space.
* canonicalize_file_name: (libc)Symbolic Links.
* carg: (libc)Operations on Complex.
* cargf: (libc)Operations on Complex.
* cargl: (libc)Operations on Complex.
* casin: (libc)Inverse Trig Functions.
* casinf: (libc)Inverse Trig Functions.
* casinh: (libc)Hyperbolic Functions.
* casinhf: (libc)Hyperbolic Functions.
* casinhl: (libc)Hyperbolic Functions.
* casinl: (libc)Inverse Trig Functions.
* catan: (libc)Inverse Trig Functions.
* catanf: (libc)Inverse Trig Functions.
* catanh: (libc)Hyperbolic Functions.
* catanhf: (libc)Hyperbolic Functions.
* catanhl: (libc)Hyperbolic Functions.
* catanl: (libc)Inverse Trig Functions.
* catclose: (libc)The catgets Functions.
* catgets: (libc)The catgets Functions.
* catopen: (libc)The catgets Functions.
* cbc_crypt: (libc)DES Encryption.
* cbrt: (libc)Exponents and Logarithms.
* cbrtf: (libc)Exponents and Logarithms.
* cbrtl: (libc)Exponents and Logarithms.
* ccos: (libc)Trig Functions.
* ccosf: (libc)Trig Functions.
* ccosh: (libc)Hyperbolic Functions.
* ccoshf: (libc)Hyperbolic Functions.
* ccoshl: (libc)Hyperbolic Functions.
* ccosl: (libc)Trig Functions.
* ceil: (libc)Rounding Functions.
* ceilf: (libc)Rounding Functions.
* ceill: (libc)Rounding Functions.
* cexp: (libc)Exponents and Logarithms.
* cexpf: (libc)Exponents and Logarithms.
* cexpl: (libc)Exponents and Logarithms.
* cfgetispeed: (libc)Line Speed.
* cfgetospeed: (libc)Line Speed.
* cfmakeraw: (libc)Noncanonical Input.
* cfree: (libc)Freeing after Malloc.
* cfsetispeed: (libc)Line Speed.
* cfsetospeed: (libc)Line Speed.
* cfsetspeed: (libc)Line Speed.
* chdir: (libc)Working Directory.
* chmod: (libc)Setting Permissions.
* chown: (libc)File Owner.
* cimag: (libc)Operations on Complex.
* cimagf: (libc)Operations on Complex.
* cimagl: (libc)Operations on Complex.
* clearenv: (libc)Environment Access.
* clearerr: (libc)Error Recovery.
* clearerr_unlocked: (libc)Error Recovery.
* clock: (libc)CPU Time.
* clog10: (libc)Exponents and Logarithms.
* clog10f: (libc)Exponents and Logarithms.
* clog10l: (libc)Exponents and Logarithms.
* clog: (libc)Exponents and Logarithms.
* clogf: (libc)Exponents and Logarithms.
* clogl: (libc)Exponents and Logarithms.
* close: (libc)Opening and Closing Files.
* closedir: (libc)Reading/Closing Directory.
* closelog: (libc)closelog.
* confstr: (libc)String Parameters.
* conj: (libc)Operations on Complex.
* conjf: (libc)Operations on Complex.
* conjl: (libc)Operations on Complex.
* connect: (libc)Connecting.
* copysign: (libc)FP Bit Twiddling.
* copysignf: (libc)FP Bit Twiddling.
* copysignl: (libc)FP Bit Twiddling.
* cos: (libc)Trig Functions.
* cosf: (libc)Trig Functions.
* cosh: (libc)Hyperbolic Functions.
* coshf: (libc)Hyperbolic Functions.
* coshl: (libc)Hyperbolic Functions.
* cosl: (libc)Trig Functions.
* cpow: (libc)Exponents and Logarithms.
* cpowf: (libc)Exponents and Logarithms.
* cpowl: (libc)Exponents and Logarithms.
* cproj: (libc)Operations on Complex.
* cprojf: (libc)Operations on Complex.
* cprojl: (libc)Operations on Complex.
* creal: (libc)Operations on Complex.
* crealf: (libc)Operations on Complex.
* creall: (libc)Operations on Complex.
* creat64: (libc)Opening and Closing Files.
* creat: (libc)Opening and Closing Files.
* crypt: (libc)crypt.
* crypt_r: (libc)crypt.
* csin: (libc)Trig Functions.
* csinf: (libc)Trig Functions.
* csinh: (libc)Hyperbolic Functions.
* csinhf: (libc)Hyperbolic Functions.
* csinhl: (libc)Hyperbolic Functions.
* csinl: (libc)Trig Functions.
* csqrt: (libc)Exponents and Logarithms.
* csqrtf: (libc)Exponents and Logarithms.
* csqrtl: (libc)Exponents and Logarithms.
* ctan: (libc)Trig Functions.
* ctanf: (libc)Trig Functions.
* ctanh: (libc)Hyperbolic Functions.
* ctanhf: (libc)Hyperbolic Functions.
* ctanhl: (libc)Hyperbolic Functions.
* ctanl: (libc)Trig Functions.
* ctermid: (libc)Identifying the Terminal.
* ctime: (libc)Formatting Calendar Time.
* ctime_r: (libc)Formatting Calendar Time.
* cuserid: (libc)Who Logged In.
* dcgettext: (libc)Translation with gettext.
* dcngettext: (libc)Advanced gettext functions.
* des_setparity: (libc)DES Encryption.
* dgettext: (libc)Translation with gettext.
* difftime: (libc)Elapsed Time.
* dirfd: (libc)Opening a Directory.
* dirname: (libc)Finding Tokens in a String.
* div: (libc)Integer Division.
* dngettext: (libc)Advanced gettext functions.
* drand48: (libc)SVID Random.
* drand48_r: (libc)SVID Random.
* drem: (libc)Remainder Functions.
* dremf: (libc)Remainder Functions.
* dreml: (libc)Remainder Functions.
* dup2: (libc)Duplicating Descriptors.
* dup: (libc)Duplicating Descriptors.
* ecb_crypt: (libc)DES Encryption.
* ecvt: (libc)System V Number Conversion.
* ecvt_r: (libc)System V Number Conversion.
* encrypt: (libc)DES Encryption.
* encrypt_r: (libc)DES Encryption.
* endfsent: (libc)fstab.
* endgrent: (libc)Scanning All Groups.
* endhostent: (libc)Host Names.
* endmntent: (libc)mtab.
* endnetent: (libc)Networks Database.
* endnetgrent: (libc)Lookup Netgroup.
* endprotoent: (libc)Protocols Database.
* endpwent: (libc)Scanning All Users.
* endservent: (libc)Services Database.
* endutent: (libc)Manipulating the Database.
* endutxent: (libc)XPG Functions.
* envz_add: (libc)Envz Functions.
* envz_entry: (libc)Envz Functions.
* envz_get: (libc)Envz Functions.
* envz_merge: (libc)Envz Functions.
* envz_strip: (libc)Envz Functions.
* erand48: (libc)SVID Random.
* erand48_r: (libc)SVID Random.
* erf: (libc)Special Functions.
* erfc: (libc)Special Functions.
* erfcf: (libc)Special Functions.
* erfcl: (libc)Special Functions.
* erff: (libc)Special Functions.
* erfl: (libc)Special Functions.
* err: (libc)Error Messages.
* errno: (libc)Checking for Errors.
* error: (libc)Error Messages.
* error_at_line: (libc)Error Messages.
* errx: (libc)Error Messages.
* execl: (libc)Executing a File.
* execle: (libc)Executing a File.
* execlp: (libc)Executing a File.
* execv: (libc)Executing a File.
* execve: (libc)Executing a File.
* execvp: (libc)Executing a File.
* exit: (libc)Normal Termination.
* exp10: (libc)Exponents and Logarithms.
* exp10f: (libc)Exponents and Logarithms.
* exp10l: (libc)Exponents and Logarithms.
* exp2: (libc)Exponents and Logarithms.
* exp2f: (libc)Exponents and Logarithms.
* exp2l: (libc)Exponents and Logarithms.
* exp: (libc)Exponents and Logarithms.
* expf: (libc)Exponents and Logarithms.
* expl: (libc)Exponents and Logarithms.
* expm1: (libc)Exponents and Logarithms.
* expm1f: (libc)Exponents and Logarithms.
* expm1l: (libc)Exponents and Logarithms.
* fabs: (libc)Absolute Value.
* fabsf: (libc)Absolute Value.
* fabsl: (libc)Absolute Value.
* fchdir: (libc)Working Directory.
* fchmod: (libc)Setting Permissions.
* fchown: (libc)File Owner.
* fclose: (libc)Closing Streams.
* fcloseall: (libc)Closing Streams.
* fcntl: (libc)Control Operations.
* fcvt: (libc)System V Number Conversion.
* fcvt_r: (libc)System V Number Conversion.
* fdatasync: (libc)Synchronizing I/O.
* fdim: (libc)Misc FP Arithmetic.
* fdimf: (libc)Misc FP Arithmetic.
* fdiml: (libc)Misc FP Arithmetic.
* fdopen: (libc)Descriptors and Streams.
* fdopendir: (libc)Opening a Directory.
* feclearexcept: (libc)Status bit operations.
* fedisableexcept: (libc)Control Functions.
* feenableexcept: (libc)Control Functions.
* fegetenv: (libc)Control Functions.
* fegetexcept: (libc)Control Functions.
* fegetexceptflag: (libc)Status bit operations.
* fegetround: (libc)Rounding.
* feholdexcept: (libc)Control Functions.
* feof: (libc)EOF and Errors.
* feof_unlocked: (libc)EOF and Errors.
* feraiseexcept: (libc)Status bit operations.
* ferror: (libc)EOF and Errors.
* ferror_unlocked: (libc)EOF and Errors.
* fesetenv: (libc)Control Functions.
* fesetexceptflag: (libc)Status bit operations.
* fesetround: (libc)Rounding.
* fetestexcept: (libc)Status bit operations.
* feupdateenv: (libc)Control Functions.
* fflush: (libc)Flushing Buffers.
* fflush_unlocked: (libc)Flushing Buffers.
* fgetc: (libc)Character Input.
* fgetc_unlocked: (libc)Character Input.
* fgetgrent: (libc)Scanning All Groups.
* fgetgrent_r: (libc)Scanning All Groups.
* fgetpos64: (libc)Portable Positioning.
* fgetpos: (libc)Portable Positioning.
* fgetpwent: (libc)Scanning All Users.
* fgetpwent_r: (libc)Scanning All Users.
* fgets: (libc)Line Input.
* fgets_unlocked: (libc)Line Input.
* fgetwc: (libc)Character Input.
* fgetwc_unlocked: (libc)Character Input.
* fgetws: (libc)Line Input.
* fgetws_unlocked: (libc)Line Input.
* fileno: (libc)Descriptors and Streams.
* fileno_unlocked: (libc)Descriptors and Streams.
* finite: (libc)Floating Point Classes.
* finitef: (libc)Floating Point Classes.
* finitel: (libc)Floating Point Classes.
* flockfile: (libc)Streams and Threads.
* floor: (libc)Rounding Functions.
* floorf: (libc)Rounding Functions.
* floorl: (libc)Rounding Functions.
* fma: (libc)Misc FP Arithmetic.
* fmaf: (libc)Misc FP Arithmetic.
* fmal: (libc)Misc FP Arithmetic.
* fmax: (libc)Misc FP Arithmetic.
* fmaxf: (libc)Misc FP Arithmetic.
* fmaxl: (libc)Misc FP Arithmetic.
* fmemopen: (libc)String Streams.
* fmin: (libc)Misc FP Arithmetic.
* fminf: (libc)Misc FP Arithmetic.
* fminl: (libc)Misc FP Arithmetic.
* fmod: (libc)Remainder Functions.
* fmodf: (libc)Remainder Functions.
* fmodl: (libc)Remainder Functions.
* fmtmsg: (libc)Printing Formatted Messages.
* fnmatch: (libc)Wildcard Matching.
* fopen64: (libc)Opening Streams.
* fopen: (libc)Opening Streams.
* fopencookie: (libc)Streams and Cookies.
* fork: (libc)Creating a Process.
* forkpty: (libc)Pseudo-Terminal Pairs.
* fpathconf: (libc)Pathconf.
* fpclassify: (libc)Floating Point Classes.
* fprintf: (libc)Formatted Output Functions.
* fputc: (libc)Simple Output.
* fputc_unlocked: (libc)Simple Output.
* fputs: (libc)Simple Output.
* fputs_unlocked: (libc)Simple Output.
* fputwc: (libc)Simple Output.
* fputwc_unlocked: (libc)Simple Output.
* fputws: (libc)Simple Output.
* fputws_unlocked: (libc)Simple Output.
* fread: (libc)Block Input/Output.
* fread_unlocked: (libc)Block Input/Output.
* free: (libc)Freeing after Malloc.
* freopen64: (libc)Opening Streams.
* freopen: (libc)Opening Streams.
* frexp: (libc)Normalization Functions.
* frexpf: (libc)Normalization Functions.
* frexpl: (libc)Normalization Functions.
* fscanf: (libc)Formatted Input Functions.
* fseek: (libc)File Positioning.
* fseeko64: (libc)File Positioning.
* fseeko: (libc)File Positioning.
* fsetpos64: (libc)Portable Positioning.
* fsetpos: (libc)Portable Positioning.
* fstat64: (libc)Reading Attributes.
* fstat: (libc)Reading Attributes.
* fsync: (libc)Synchronizing I/O.
* ftell: (libc)File Positioning.
* ftello64: (libc)File Positioning.
* ftello: (libc)File Positioning.
* ftruncate64: (libc)File Size.
* ftruncate: (libc)File Size.
* ftrylockfile: (libc)Streams and Threads.
* ftw64: (libc)Working with Directory Trees.
* ftw: (libc)Working with Directory Trees.
* funlockfile: (libc)Streams and Threads.
* futimes: (libc)File Times.
* fwide: (libc)Streams and I18N.
* fwprintf: (libc)Formatted Output Functions.
* fwrite: (libc)Block Input/Output.
* fwrite_unlocked: (libc)Block Input/Output.
* fwscanf: (libc)Formatted Input Functions.
* gamma: (libc)Special Functions.
* gammaf: (libc)Special Functions.
* gammal: (libc)Special Functions.
* gcvt: (libc)System V Number Conversion.
* get_avphys_pages: (libc)Query Memory Parameters.
* get_current_dir_name: (libc)Working Directory.
* get_nprocs: (libc)Processor Resources.
* get_nprocs_conf: (libc)Processor Resources.
* get_phys_pages: (libc)Query Memory Parameters.
* getauxval: (libc)Auxiliary Vector.
* getc: (libc)Character Input.
* getc_unlocked: (libc)Character Input.
* getchar: (libc)Character Input.
* getchar_unlocked: (libc)Character Input.
* getcontext: (libc)System V contexts.
* getcwd: (libc)Working Directory.
* getdate: (libc)General Time String Parsing.
* getdate_r: (libc)General Time String Parsing.
* getdelim: (libc)Line Input.
* getdomainnname: (libc)Host Identification.
* getegid: (libc)Reading Persona.
* getenv: (libc)Environment Access.
* geteuid: (libc)Reading Persona.
* getfsent: (libc)fstab.
* getfsfile: (libc)fstab.
* getfsspec: (libc)fstab.
* getgid: (libc)Reading Persona.
* getgrent: (libc)Scanning All Groups.
* getgrent_r: (libc)Scanning All Groups.
* getgrgid: (libc)Lookup Group.
* getgrgid_r: (libc)Lookup Group.
* getgrnam: (libc)Lookup Group.
* getgrnam_r: (libc)Lookup Group.
* getgrouplist: (libc)Setting Groups.
* getgroups: (libc)Reading Persona.
* gethostbyaddr: (libc)Host Names.
* gethostbyaddr_r: (libc)Host Names.
* gethostbyname2: (libc)Host Names.
* gethostbyname2_r: (libc)Host Names.
* gethostbyname: (libc)Host Names.
* gethostbyname_r: (libc)Host Names.
* gethostent: (libc)Host Names.
* gethostid: (libc)Host Identification.
* gethostname: (libc)Host Identification.
* getitimer: (libc)Setting an Alarm.
* getline: (libc)Line Input.
* getloadavg: (libc)Processor Resources.
* getlogin: (libc)Who Logged In.
* getmntent: (libc)mtab.
* getmntent_r: (libc)mtab.
* getnetbyaddr: (libc)Networks Database.
* getnetbyname: (libc)Networks Database.
* getnetent: (libc)Networks Database.
* getnetgrent: (libc)Lookup Netgroup.
* getnetgrent_r: (libc)Lookup Netgroup.
* getopt: (libc)Using Getopt.
* getopt_long: (libc)Getopt Long Options.
* getopt_long_only: (libc)Getopt Long Options.
* getpagesize: (libc)Query Memory Parameters.
* getpass: (libc)getpass.
* getpeername: (libc)Who is Connected.
* getpgid: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpid: (libc)Process Identification.
* getppid: (libc)Process Identification.
* getpriority: (libc)Traditional Scheduling Functions.
* getprotobyname: (libc)Protocols Database.
* getprotobynumber: (libc)Protocols Database.
* getprotoent: (libc)Protocols Database.
* getpt: (libc)Allocation.
* getpwent: (libc)Scanning All Users.
* getpwent_r: (libc)Scanning All Users.
* getpwnam: (libc)Lookup User.
* getpwnam_r: (libc)Lookup User.
* getpwuid: (libc)Lookup User.
* getpwuid_r: (libc)Lookup User.
* getrlimit64: (libc)Limits on Resources.
* getrlimit: (libc)Limits on Resources.
* getrusage: (libc)Resource Usage.
* gets: (libc)Line Input.
* getservbyname: (libc)Services Database.
* getservbyport: (libc)Services Database.
* getservent: (libc)Services Database.
* getsid: (libc)Process Group Functions.
* getsockname: (libc)Reading Address.
* getsockopt: (libc)Socket Option Functions.
* getsubopt: (libc)Suboptions.
* gettext: (libc)Translation with gettext.
* gettimeofday: (libc)High-Resolution Calendar.
* getuid: (libc)Reading Persona.
* getumask: (libc)Setting Permissions.
* getutent: (libc)Manipulating the Database.
* getutent_r: (libc)Manipulating the Database.
* getutid: (libc)Manipulating the Database.
* getutid_r: (libc)Manipulating the Database.
* getutline: (libc)Manipulating the Database.
* getutline_r: (libc)Manipulating the Database.
* getutmp: (libc)XPG Functions.
* getutmpx: (libc)XPG Functions.
* getutxent: (libc)XPG Functions.
* getutxid: (libc)XPG Functions.
* getutxline: (libc)XPG Functions.
* getw: (libc)Character Input.
* getwc: (libc)Character Input.
* getwc_unlocked: (libc)Character Input.
* getwchar: (libc)Character Input.
* getwchar_unlocked: (libc)Character Input.
* getwd: (libc)Working Directory.
* glob64: (libc)Calling Glob.
* glob: (libc)Calling Glob.
* globfree64: (libc)More Flags for Globbing.
* globfree: (libc)More Flags for Globbing.
* gmtime: (libc)Broken-down Time.
* gmtime_r: (libc)Broken-down Time.
* grantpt: (libc)Allocation.
* gsignal: (libc)Signaling Yourself.
* gtty: (libc)BSD Terminal Modes.
* hasmntopt: (libc)mtab.
* hcreate: (libc)Hash Search Function.
* hcreate_r: (libc)Hash Search Function.
* hdestroy: (libc)Hash Search Function.
* hdestroy_r: (libc)Hash Search Function.
* hsearch: (libc)Hash Search Function.
* hsearch_r: (libc)Hash Search Function.
* htonl: (libc)Byte Order.
* htons: (libc)Byte Order.
* hypot: (libc)Exponents and Logarithms.
* hypotf: (libc)Exponents and Logarithms.
* hypotl: (libc)Exponents and Logarithms.
* iconv: (libc)Generic Conversion Interface.
* iconv_close: (libc)Generic Conversion Interface.
* iconv_open: (libc)Generic Conversion Interface.
* if_freenameindex: (libc)Interface Naming.
* if_indextoname: (libc)Interface Naming.
* if_nameindex: (libc)Interface Naming.
* if_nametoindex: (libc)Interface Naming.
* ilogb: (libc)Exponents and Logarithms.
* ilogbf: (libc)Exponents and Logarithms.
* ilogbl: (libc)Exponents and Logarithms.
* imaxabs: (libc)Absolute Value.
* imaxdiv: (libc)Integer Division.
* in6addr_any: (libc)Host Address Data Type.
* in6addr_loopback: (libc)Host Address Data Type.
* index: (libc)Search Functions.
* inet_addr: (libc)Host Address Functions.
* inet_aton: (libc)Host Address Functions.
* inet_lnaof: (libc)Host Address Functions.
* inet_makeaddr: (libc)Host Address Functions.
* inet_netof: (libc)Host Address Functions.
* inet_network: (libc)Host Address Functions.
* inet_ntoa: (libc)Host Address Functions.
* inet_ntop: (libc)Host Address Functions.
* inet_pton: (libc)Host Address Functions.
* initgroups: (libc)Setting Groups.
* initstate: (libc)BSD Random.
* initstate_r: (libc)BSD Random.
* innetgr: (libc)Netgroup Membership.
* ioctl: (libc)IOCTLs.
* isalnum: (libc)Classification of Characters.
* isalpha: (libc)Classification of Characters.
* isascii: (libc)Classification of Characters.
* isatty: (libc)Is It a Terminal.
* isblank: (libc)Classification of Characters.
* iscntrl: (libc)Classification of Characters.
* isdigit: (libc)Classification of Characters.
* isfinite: (libc)Floating Point Classes.
* isgraph: (libc)Classification of Characters.
* isgreater: (libc)FP Comparison Functions.
* isgreaterequal: (libc)FP Comparison Functions.
* isinf: (libc)Floating Point Classes.
* isinff: (libc)Floating Point Classes.
* isinfl: (libc)Floating Point Classes.
* isless: (libc)FP Comparison Functions.
* islessequal: (libc)FP Comparison Functions.
* islessgreater: (libc)FP Comparison Functions.
* islower: (libc)Classification of Characters.
* isnan: (libc)Floating Point Classes.
* isnan: (libc)Floating Point Classes.
* isnanf: (libc)Floating Point Classes.
* isnanl: (libc)Floating Point Classes.
* isnormal: (libc)Floating Point Classes.
* isprint: (libc)Classification of Characters.
* ispunct: (libc)Classification of Characters.
* issignaling: (libc)Floating Point Classes.
* isspace: (libc)Classification of Characters.
* isunordered: (libc)FP Comparison Functions.
* isupper: (libc)Classification of Characters.
* iswalnum: (libc)Classification of Wide Characters.
* iswalpha: (libc)Classification of Wide Characters.
* iswblank: (libc)Classification of Wide Characters.
* iswcntrl: (libc)Classification of Wide Characters.
* iswctype: (libc)Classification of Wide Characters.
* iswdigit: (libc)Classification of Wide Characters.
* iswgraph: (libc)Classification of Wide Characters.
* iswlower: (libc)Classification of Wide Characters.
* iswprint: (libc)Classification of Wide Characters.
* iswpunct: (libc)Classification of Wide Characters.
* iswspace: (libc)Classification of Wide Characters.
* iswupper: (libc)Classification of Wide Characters.
* iswxdigit: (libc)Classification of Wide Characters.
* isxdigit: (libc)Classification of Characters.
* j0: (libc)Special Functions.
* j0f: (libc)Special Functions.
* j0l: (libc)Special Functions.
* j1: (libc)Special Functions.
* j1f: (libc)Special Functions.
* j1l: (libc)Special Functions.
* jn: (libc)Special Functions.
* jnf: (libc)Special Functions.
* jnl: (libc)Special Functions.
* jrand48: (libc)SVID Random.
* jrand48_r: (libc)SVID Random.
* kill: (libc)Signaling Another Process.
* killpg: (libc)Signaling Another Process.
* l64a: (libc)Encode Binary Data.
* labs: (libc)Absolute Value.
* lcong48: (libc)SVID Random.
* lcong48_r: (libc)SVID Random.
* ldexp: (libc)Normalization Functions.
* ldexpf: (libc)Normalization Functions.
* ldexpl: (libc)Normalization Functions.
* ldiv: (libc)Integer Division.
* lfind: (libc)Array Search Function.
* lgamma: (libc)Special Functions.
* lgamma_r: (libc)Special Functions.
* lgammaf: (libc)Special Functions.
* lgammaf_r: (libc)Special Functions.
* lgammal: (libc)Special Functions.
* lgammal_r: (libc)Special Functions.
* link: (libc)Hard Links.
* lio_listio64: (libc)Asynchronous Reads/Writes.
* lio_listio: (libc)Asynchronous Reads/Writes.
* listen: (libc)Listening.
* llabs: (libc)Absolute Value.
* lldiv: (libc)Integer Division.
* llrint: (libc)Rounding Functions.
* llrintf: (libc)Rounding Functions.
* llrintl: (libc)Rounding Functions.
* llround: (libc)Rounding Functions.
* llroundf: (libc)Rounding Functions.
* llroundl: (libc)Rounding Functions.
* localeconv: (libc)The Lame Way to Locale Data.
* localtime: (libc)Broken-down Time.
* localtime_r: (libc)Broken-down Time.
* log10: (libc)Exponents and Logarithms.
* log10f: (libc)Exponents and Logarithms.
* log10l: (libc)Exponents and Logarithms.
* log1p: (libc)Exponents and Logarithms.
* log1pf: (libc)Exponents and Logarithms.
* log1pl: (libc)Exponents and Logarithms.
* log2: (libc)Exponents and Logarithms.
* log2f: (libc)Exponents and Logarithms.
* log2l: (libc)Exponents and Logarithms.
* log: (libc)Exponents and Logarithms.
* logb: (libc)Exponents and Logarithms.
* logbf: (libc)Exponents and Logarithms.
* logbl: (libc)Exponents and Logarithms.
* logf: (libc)Exponents and Logarithms.
* login: (libc)Logging In and Out.
* login_tty: (libc)Logging In and Out.
* logl: (libc)Exponents and Logarithms.
* logout: (libc)Logging In and Out.
* logwtmp: (libc)Logging In and Out.
* longjmp: (libc)Non-Local Details.
* lrand48: (libc)SVID Random.
* lrand48_r: (libc)SVID Random.
* lrint: (libc)Rounding Functions.
* lrintf: (libc)Rounding Functions.
* lrintl: (libc)Rounding Functions.
* lround: (libc)Rounding Functions.
* lroundf: (libc)Rounding Functions.
* lroundl: (libc)Rounding Functions.
* lsearch: (libc)Array Search Function.
* lseek64: (libc)File Position Primitive.
* lseek: (libc)File Position Primitive.
* lstat64: (libc)Reading Attributes.
* lstat: (libc)Reading Attributes.
* lutimes: (libc)File Times.
* madvise: (libc)Memory-mapped I/O.
* makecontext: (libc)System V contexts.
* mallinfo: (libc)Statistics of Malloc.
* malloc: (libc)Basic Allocation.
* mallopt: (libc)Malloc Tunable Parameters.
* mblen: (libc)Non-reentrant Character Conversion.
* mbrlen: (libc)Converting a Character.
* mbrtowc: (libc)Converting a Character.
* mbsinit: (libc)Keeping the state.
* mbsnrtowcs: (libc)Converting Strings.
* mbsrtowcs: (libc)Converting Strings.
* mbstowcs: (libc)Non-reentrant String Conversion.
* mbtowc: (libc)Non-reentrant Character Conversion.
* mcheck: (libc)Heap Consistency Checking.
* memalign: (libc)Aligned Memory Blocks.
* memccpy: (libc)Copying and Concatenation.
* memchr: (libc)Search Functions.
* memcmp: (libc)String/Array Comparison.
* memcpy: (libc)Copying and Concatenation.
* memfrob: (libc)Trivial Encryption.
* memmem: (libc)Search Functions.
* memmove: (libc)Copying and Concatenation.
* mempcpy: (libc)Copying and Concatenation.
* memrchr: (libc)Search Functions.
* memset: (libc)Copying and Concatenation.
* mkdir: (libc)Creating Directories.
* mkdtemp: (libc)Temporary Files.
* mkfifo: (libc)FIFO Special Files.
* mknod: (libc)Making Special Files.
* mkstemp: (libc)Temporary Files.
* mktemp: (libc)Temporary Files.
* mktime: (libc)Broken-down Time.
* mlock: (libc)Page Lock Functions.
* mlockall: (libc)Page Lock Functions.
* mmap64: (libc)Memory-mapped I/O.
* mmap: (libc)Memory-mapped I/O.
* modf: (libc)Rounding Functions.
* modff: (libc)Rounding Functions.
* modfl: (libc)Rounding Functions.
* mount: (libc)Mount-Unmount-Remount.
* mprobe: (libc)Heap Consistency Checking.
* mrand48: (libc)SVID Random.
* mrand48_r: (libc)SVID Random.
* mremap: (libc)Memory-mapped I/O.
* msync: (libc)Memory-mapped I/O.
* mtrace: (libc)Tracing malloc.
* munlock: (libc)Page Lock Functions.
* munlockall: (libc)Page Lock Functions.
* munmap: (libc)Memory-mapped I/O.
* muntrace: (libc)Tracing malloc.
* nan: (libc)FP Bit Twiddling.
* nanf: (libc)FP Bit Twiddling.
* nanl: (libc)FP Bit Twiddling.
* nanosleep: (libc)Sleeping.
* nearbyint: (libc)Rounding Functions.
* nearbyintf: (libc)Rounding Functions.
* nearbyintl: (libc)Rounding Functions.
* nextafter: (libc)FP Bit Twiddling.
* nextafterf: (libc)FP Bit Twiddling.
* nextafterl: (libc)FP Bit Twiddling.
* nexttoward: (libc)FP Bit Twiddling.
* nexttowardf: (libc)FP Bit Twiddling.
* nexttowardl: (libc)FP Bit Twiddling.
* nftw64: (libc)Working with Directory Trees.
* nftw: (libc)Working with Directory Trees.
* ngettext: (libc)Advanced gettext functions.
* nice: (libc)Traditional Scheduling Functions.
* nl_langinfo: (libc)The Elegant and Fast Way.
* nrand48: (libc)SVID Random.
* nrand48_r: (libc)SVID Random.
* ntohl: (libc)Byte Order.
* ntohs: (libc)Byte Order.
* ntp_adjtime: (libc)High Accuracy Clock.
* ntp_gettime: (libc)High Accuracy Clock.
* obstack_1grow: (libc)Growing Objects.
* obstack_1grow_fast: (libc)Extra Fast Growing.
* obstack_alignment_mask: (libc)Obstacks Data Alignment.
* obstack_alloc: (libc)Allocation in an Obstack.
* obstack_base: (libc)Status of an Obstack.
* obstack_blank: (libc)Growing Objects.
* obstack_blank_fast: (libc)Extra Fast Growing.
* obstack_chunk_size: (libc)Obstack Chunks.
* obstack_copy0: (libc)Allocation in an Obstack.
* obstack_copy: (libc)Allocation in an Obstack.
* obstack_finish: (libc)Growing Objects.
* obstack_free: (libc)Freeing Obstack Objects.
* obstack_grow0: (libc)Growing Objects.
* obstack_grow: (libc)Growing Objects.
* obstack_init: (libc)Preparing for Obstacks.
* obstack_int_grow: (libc)Growing Objects.
* obstack_int_grow_fast: (libc)Extra Fast Growing.
* obstack_next_free: (libc)Status of an Obstack.
* obstack_object_size: (libc)Growing Objects.
* obstack_object_size: (libc)Status of an Obstack.
* obstack_printf: (libc)Dynamic Output.
* obstack_ptr_grow: (libc)Growing Objects.
* obstack_ptr_grow_fast: (libc)Extra Fast Growing.
* obstack_room: (libc)Extra Fast Growing.
* obstack_vprintf: (libc)Variable Arguments Output.
* offsetof: (libc)Structure Measurement.
* on_exit: (libc)Cleanups on Exit.
* open64: (libc)Opening and Closing Files.
* open: (libc)Opening and Closing Files.
* open_memstream: (libc)String Streams.
* opendir: (libc)Opening a Directory.
* openlog: (libc)openlog.
* openpty: (libc)Pseudo-Terminal Pairs.
* parse_printf_format: (libc)Parsing a Template String.
* pathconf: (libc)Pathconf.
* pause: (libc)Using Pause.
* pclose: (libc)Pipe to a Subprocess.
* perror: (libc)Error Messages.
* pipe: (libc)Creating a Pipe.
* popen: (libc)Pipe to a Subprocess.
* posix_memalign: (libc)Aligned Memory Blocks.
* pow10: (libc)Exponents and Logarithms.
* pow10f: (libc)Exponents and Logarithms.
* pow10l: (libc)Exponents and Logarithms.
* pow: (libc)Exponents and Logarithms.
* powf: (libc)Exponents and Logarithms.
* powl: (libc)Exponents and Logarithms.
* pread64: (libc)I/O Primitives.
* pread: (libc)I/O Primitives.
* printf: (libc)Formatted Output Functions.
* printf_size: (libc)Predefined Printf Handlers.
* printf_size_info: (libc)Predefined Printf Handlers.
* psignal: (libc)Signal Messages.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* pthread_getspecific: (libc)Thread-specific Data.
* pthread_key_create: (libc)Thread-specific Data.
* pthread_key_delete: (libc)Thread-specific Data.
* pthread_setattr_default_np: (libc)Default Thread Attributes.
* pthread_setspecific: (libc)Thread-specific Data.
* ptsname: (libc)Allocation.
* ptsname_r: (libc)Allocation.
* putc: (libc)Simple Output.
* putc_unlocked: (libc)Simple Output.
* putchar: (libc)Simple Output.
* putchar_unlocked: (libc)Simple Output.
* putenv: (libc)Environment Access.
* putpwent: (libc)Writing a User Entry.
* puts: (libc)Simple Output.
* pututline: (libc)Manipulating the Database.
* pututxline: (libc)XPG Functions.
* putw: (libc)Simple Output.
* putwc: (libc)Simple Output.
* putwc_unlocked: (libc)Simple Output.
* putwchar: (libc)Simple Output.
* putwchar_unlocked: (libc)Simple Output.
* pwrite64: (libc)I/O Primitives.
* pwrite: (libc)I/O Primitives.
* qecvt: (libc)System V Number Conversion.
* qecvt_r: (libc)System V Number Conversion.
* qfcvt: (libc)System V Number Conversion.
* qfcvt_r: (libc)System V Number Conversion.
* qgcvt: (libc)System V Number Conversion.
* qsort: (libc)Array Sort Function.
* raise: (libc)Signaling Yourself.
* rand: (libc)ISO Random.
* rand_r: (libc)ISO Random.
* random: (libc)BSD Random.
* random_r: (libc)BSD Random.
* rawmemchr: (libc)Search Functions.
* read: (libc)I/O Primitives.
* readdir64: (libc)Reading/Closing Directory.
* readdir64_r: (libc)Reading/Closing Directory.
* readdir: (libc)Reading/Closing Directory.
* readdir_r: (libc)Reading/Closing Directory.
* readlink: (libc)Symbolic Links.
* readv: (libc)Scatter-Gather.
* realloc: (libc)Changing Block Size.
* realpath: (libc)Symbolic Links.
* recv: (libc)Receiving Data.
* recvfrom: (libc)Receiving Datagrams.
* recvmsg: (libc)Receiving Datagrams.
* regcomp: (libc)POSIX Regexp Compilation.
* regerror: (libc)Regexp Cleanup.
* regexec: (libc)Matching POSIX Regexps.
* regfree: (libc)Regexp Cleanup.
* register_printf_function: (libc)Registering New Conversions.
* remainder: (libc)Remainder Functions.
* remainderf: (libc)Remainder Functions.
* remainderl: (libc)Remainder Functions.
* remove: (libc)Deleting Files.
* rename: (libc)Renaming Files.
* rewind: (libc)File Positioning.
* rewinddir: (libc)Random Access Directory.
* rindex: (libc)Search Functions.
* rint: (libc)Rounding Functions.
* rintf: (libc)Rounding Functions.
* rintl: (libc)Rounding Functions.
* rmdir: (libc)Deleting Files.
* round: (libc)Rounding Functions.
* roundf: (libc)Rounding Functions.
* roundl: (libc)Rounding Functions.
* rpmatch: (libc)Yes-or-No Questions.
* sbrk: (libc)Resizing the Data Segment.
* scalb: (libc)Normalization Functions.
* scalbf: (libc)Normalization Functions.
* scalbl: (libc)Normalization Functions.
* scalbln: (libc)Normalization Functions.
* scalblnf: (libc)Normalization Functions.
* scalblnl: (libc)Normalization Functions.
* scalbn: (libc)Normalization Functions.
* scalbnf: (libc)Normalization Functions.
* scalbnl: (libc)Normalization Functions.
* scandir64: (libc)Scanning Directory Content.
* scandir: (libc)Scanning Directory Content.
* scanf: (libc)Formatted Input Functions.
* sched_get_priority_max: (libc)Basic Scheduling Functions.
* sched_get_priority_min: (libc)Basic Scheduling Functions.
* sched_getaffinity: (libc)CPU Affinity.
* sched_getparam: (libc)Basic Scheduling Functions.
* sched_getscheduler: (libc)Basic Scheduling Functions.
* sched_rr_get_interval: (libc)Basic Scheduling Functions.
* sched_setaffinity: (libc)CPU Affinity.
* sched_setparam: (libc)Basic Scheduling Functions.
* sched_setscheduler: (libc)Basic Scheduling Functions.
* sched_yield: (libc)Basic Scheduling Functions.
* secure_getenv: (libc)Environment Access.
* seed48: (libc)SVID Random.
* seed48_r: (libc)SVID Random.
* seekdir: (libc)Random Access Directory.
* select: (libc)Waiting for I/O.
* send: (libc)Sending Data.
* sendmsg: (libc)Receiving Datagrams.
* sendto: (libc)Sending Datagrams.
* setbuf: (libc)Controlling Buffering.
* setbuffer: (libc)Controlling Buffering.
* setcontext: (libc)System V contexts.
* setdomainname: (libc)Host Identification.
* setegid: (libc)Setting Groups.
* setenv: (libc)Environment Access.
* seteuid: (libc)Setting User ID.
* setfsent: (libc)fstab.
* setgid: (libc)Setting Groups.
* setgrent: (libc)Scanning All Groups.
* setgroups: (libc)Setting Groups.
* sethostent: (libc)Host Names.
* sethostid: (libc)Host Identification.
* sethostname: (libc)Host Identification.
* setitimer: (libc)Setting an Alarm.
* setjmp: (libc)Non-Local Details.
* setkey: (libc)DES Encryption.
* setkey_r: (libc)DES Encryption.
* setlinebuf: (libc)Controlling Buffering.
* setlocale: (libc)Setting the Locale.
* setlogmask: (libc)setlogmask.
* setmntent: (libc)mtab.
* setnetent: (libc)Networks Database.
* setnetgrent: (libc)Lookup Netgroup.
* setpgid: (libc)Process Group Functions.
* setpgrp: (libc)Process Group Functions.
* setpriority: (libc)Traditional Scheduling Functions.
* setprotoent: (libc)Protocols Database.
* setpwent: (libc)Scanning All Users.
* setregid: (libc)Setting Groups.
* setreuid: (libc)Setting User ID.
* setrlimit64: (libc)Limits on Resources.
* setrlimit: (libc)Limits on Resources.
* setservent: (libc)Services Database.
* setsid: (libc)Process Group Functions.
* setsockopt: (libc)Socket Option Functions.
* setstate: (libc)BSD Random.
* setstate_r: (libc)BSD Random.
* settimeofday: (libc)High-Resolution Calendar.
* setuid: (libc)Setting User ID.
* setutent: (libc)Manipulating the Database.
* setutxent: (libc)XPG Functions.
* setvbuf: (libc)Controlling Buffering.
* shm_open: (libc)Memory-mapped I/O.
* shm_unlink: (libc)Memory-mapped I/O.
* shutdown: (libc)Closing a Socket.
* sigaction: (libc)Advanced Signal Handling.
* sigaddset: (libc)Signal Sets.
* sigaltstack: (libc)Signal Stack.
* sigblock: (libc)Blocking in BSD.
* sigdelset: (libc)Signal Sets.
* sigemptyset: (libc)Signal Sets.
* sigfillset: (libc)Signal Sets.
* siginterrupt: (libc)BSD Handler.
* sigismember: (libc)Signal Sets.
* siglongjmp: (libc)Non-Local Exits and Signals.
* sigmask: (libc)Blocking in BSD.
* signal: (libc)Basic Signal Handling.
* signbit: (libc)FP Bit Twiddling.
* significand: (libc)Normalization Functions.
* significandf: (libc)Normalization Functions.
* significandl: (libc)Normalization Functions.
* sigpause: (libc)Blocking in BSD.
* sigpending: (libc)Checking for Pending Signals.
* sigprocmask: (libc)Process Signal Mask.
* sigsetjmp: (libc)Non-Local Exits and Signals.
* sigsetmask: (libc)Blocking in BSD.
* sigstack: (libc)Signal Stack.
* sigsuspend: (libc)Sigsuspend.
* sigvec: (libc)BSD Handler.
* sin: (libc)Trig Functions.
* sincos: (libc)Trig Functions.
* sincosf: (libc)Trig Functions.
* sincosl: (libc)Trig Functions.
* sinf: (libc)Trig Functions.
* sinh: (libc)Hyperbolic Functions.
* sinhf: (libc)Hyperbolic Functions.
* sinhl: (libc)Hyperbolic Functions.
* sinl: (libc)Trig Functions.
* sleep: (libc)Sleeping.
* snprintf: (libc)Formatted Output Functions.
* socket: (libc)Creating a Socket.
* socketpair: (libc)Socket Pairs.
* sprintf: (libc)Formatted Output Functions.
* sqrt: (libc)Exponents and Logarithms.
* sqrtf: (libc)Exponents and Logarithms.
* sqrtl: (libc)Exponents and Logarithms.
* srand48: (libc)SVID Random.
* srand48_r: (libc)SVID Random.
* srand: (libc)ISO Random.
* srandom: (libc)BSD Random.
* srandom_r: (libc)BSD Random.
* sscanf: (libc)Formatted Input Functions.
* ssignal: (libc)Basic Signal Handling.
* stat64: (libc)Reading Attributes.
* stat: (libc)Reading Attributes.
* stime: (libc)Simple Calendar Time.
* stpcpy: (libc)Copying and Concatenation.
* stpncpy: (libc)Copying and Concatenation.
* strcasecmp: (libc)String/Array Comparison.
* strcasestr: (libc)Search Functions.
* strcat: (libc)Copying and Concatenation.
* strchr: (libc)Search Functions.
* strchrnul: (libc)Search Functions.
* strcmp: (libc)String/Array Comparison.
* strcoll: (libc)Collation Functions.
* strcpy: (libc)Copying and Concatenation.
* strcspn: (libc)Search Functions.
* strdup: (libc)Copying and Concatenation.
* strdupa: (libc)Copying and Concatenation.
* strerror: (libc)Error Messages.
* strerror_r: (libc)Error Messages.
* strfmon: (libc)Formatting Numbers.
* strfry: (libc)strfry.
* strftime: (libc)Formatting Calendar Time.
* strlen: (libc)String Length.
* strncasecmp: (libc)String/Array Comparison.
* strncat: (libc)Copying and Concatenation.
* strncmp: (libc)String/Array Comparison.
* strncpy: (libc)Copying and Concatenation.
* strndup: (libc)Copying and Concatenation.
* strndupa: (libc)Copying and Concatenation.
* strnlen: (libc)String Length.
* strpbrk: (libc)Search Functions.
* strptime: (libc)Low-Level Time String Parsing.
* strrchr: (libc)Search Functions.
* strsep: (libc)Finding Tokens in a String.
* strsignal: (libc)Signal Messages.
* strspn: (libc)Search Functions.
* strstr: (libc)Search Functions.
* strtod: (libc)Parsing of Floats.
* strtof: (libc)Parsing of Floats.
* strtoimax: (libc)Parsing of Integers.
* strtok: (libc)Finding Tokens in a String.
* strtok_r: (libc)Finding Tokens in a String.
* strtol: (libc)Parsing of Integers.
* strtold: (libc)Parsing of Floats.
* strtoll: (libc)Parsing of Integers.
* strtoq: (libc)Parsing of Integers.
* strtoul: (libc)Parsing of Integers.
* strtoull: (libc)Parsing of Integers.
* strtoumax: (libc)Parsing of Integers.
* strtouq: (libc)Parsing of Integers.
* strverscmp: (libc)String/Array Comparison.
* strxfrm: (libc)Collation Functions.
* stty: (libc)BSD Terminal Modes.
* swapcontext: (libc)System V contexts.
* swprintf: (libc)Formatted Output Functions.
* swscanf: (libc)Formatted Input Functions.
* symlink: (libc)Symbolic Links.
* sync: (libc)Synchronizing I/O.
* syscall: (libc)System Calls.
* sysconf: (libc)Sysconf Definition.
* sysctl: (libc)System Parameters.
* syslog: (libc)syslog; vsyslog.
* system: (libc)Running a Command.
* sysv_signal: (libc)Basic Signal Handling.
* tan: (libc)Trig Functions.
* tanf: (libc)Trig Functions.
* tanh: (libc)Hyperbolic Functions.
* tanhf: (libc)Hyperbolic Functions.
* tanhl: (libc)Hyperbolic Functions.
* tanl: (libc)Trig Functions.
* tcdrain: (libc)Line Control.
* tcflow: (libc)Line Control.
* tcflush: (libc)Line Control.
* tcgetattr: (libc)Mode Functions.
* tcgetpgrp: (libc)Terminal Access Functions.
* tcgetsid: (libc)Terminal Access Functions.
* tcsendbreak: (libc)Line Control.
* tcsetattr: (libc)Mode Functions.
* tcsetpgrp: (libc)Terminal Access Functions.
* tdelete: (libc)Tree Search Function.
* tdestroy: (libc)Tree Search Function.
* telldir: (libc)Random Access Directory.
* tempnam: (libc)Temporary Files.
* textdomain: (libc)Locating gettext catalog.
* tfind: (libc)Tree Search Function.
* tgamma: (libc)Special Functions.
* tgammaf: (libc)Special Functions.
* tgammal: (libc)Special Functions.
* time: (libc)Simple Calendar Time.
* timegm: (libc)Broken-down Time.
* timelocal: (libc)Broken-down Time.
* times: (libc)Processor Time.
* tmpfile64: (libc)Temporary Files.
* tmpfile: (libc)Temporary Files.
* tmpnam: (libc)Temporary Files.
* tmpnam_r: (libc)Temporary Files.
* toascii: (libc)Case Conversion.
* tolower: (libc)Case Conversion.
* toupper: (libc)Case Conversion.
* towctrans: (libc)Wide Character Case Conversion.
* towlower: (libc)Wide Character Case Conversion.
* towupper: (libc)Wide Character Case Conversion.
* trunc: (libc)Rounding Functions.
* truncate64: (libc)File Size.
* truncate: (libc)File Size.
* truncf: (libc)Rounding Functions.
* truncl: (libc)Rounding Functions.
* tsearch: (libc)Tree Search Function.
* ttyname: (libc)Is It a Terminal.
* ttyname_r: (libc)Is It a Terminal.
* twalk: (libc)Tree Search Function.
* tzset: (libc)Time Zone Functions.
* ulimit: (libc)Limits on Resources.
* umask: (libc)Setting Permissions.
* umount2: (libc)Mount-Unmount-Remount.
* umount: (libc)Mount-Unmount-Remount.
* uname: (libc)Platform Type.
* ungetc: (libc)How Unread.
* ungetwc: (libc)How Unread.
* unlink: (libc)Deleting Files.
* unlockpt: (libc)Allocation.
* unsetenv: (libc)Environment Access.
* updwtmp: (libc)Manipulating the Database.
* utime: (libc)File Times.
* utimes: (libc)File Times.
* utmpname: (libc)Manipulating the Database.
* utmpxname: (libc)XPG Functions.
* va_arg: (libc)Argument Macros.
* va_copy: (libc)Argument Macros.
* va_end: (libc)Argument Macros.
* va_start: (libc)Argument Macros.
* valloc: (libc)Aligned Memory Blocks.
* vasprintf: (libc)Variable Arguments Output.
* verr: (libc)Error Messages.
* verrx: (libc)Error Messages.
* versionsort64: (libc)Scanning Directory Content.
* versionsort: (libc)Scanning Directory Content.
* vfork: (libc)Creating a Process.
* vfprintf: (libc)Variable Arguments Output.
* vfscanf: (libc)Variable Arguments Input.
* vfwprintf: (libc)Variable Arguments Output.
* vfwscanf: (libc)Variable Arguments Input.
* vlimit: (libc)Limits on Resources.
* vprintf: (libc)Variable Arguments Output.
* vscanf: (libc)Variable Arguments Input.
* vsnprintf: (libc)Variable Arguments Output.
* vsprintf: (libc)Variable Arguments Output.
* vsscanf: (libc)Variable Arguments Input.
* vswprintf: (libc)Variable Arguments Output.
* vswscanf: (libc)Variable Arguments Input.
* vsyslog: (libc)syslog; vsyslog.
* vtimes: (libc)Resource Usage.
* vwarn: (libc)Error Messages.
* vwarnx: (libc)Error Messages.
* vwprintf: (libc)Variable Arguments Output.
* vwscanf: (libc)Variable Arguments Input.
* wait3: (libc)BSD Wait Functions.
* wait4: (libc)Process Completion.
* wait: (libc)Process Completion.
* waitpid: (libc)Process Completion.
* warn: (libc)Error Messages.
* warnx: (libc)Error Messages.
* wcpcpy: (libc)Copying and Concatenation.
* wcpncpy: (libc)Copying and Concatenation.
* wcrtomb: (libc)Converting a Character.
* wcscasecmp: (libc)String/Array Comparison.
* wcscat: (libc)Copying and Concatenation.
* wcschr: (libc)Search Functions.
* wcschrnul: (libc)Search Functions.
* wcscmp: (libc)String/Array Comparison.
* wcscoll: (libc)Collation Functions.
* wcscpy: (libc)Copying and Concatenation.
* wcscspn: (libc)Search Functions.
* wcsdup: (libc)Copying and Concatenation.
* wcsftime: (libc)Formatting Calendar Time.
* wcslen: (libc)String Length.
* wcsncasecmp: (libc)String/Array Comparison.
* wcsncat: (libc)Copying and Concatenation.
* wcsncmp: (libc)String/Array Comparison.
* wcsncpy: (libc)Copying and Concatenation.
* wcsnlen: (libc)String Length.
* wcsnrtombs: (libc)Converting Strings.
* wcspbrk: (libc)Search Functions.
* wcsrchr: (libc)Search Functions.
* wcsrtombs: (libc)Converting Strings.
* wcsspn: (libc)Search Functions.
* wcsstr: (libc)Search Functions.
* wcstod: (libc)Parsing of Floats.
* wcstof: (libc)Parsing of Floats.
* wcstoimax: (libc)Parsing of Integers.
* wcstok: (libc)Finding Tokens in a String.
* wcstol: (libc)Parsing of Integers.
* wcstold: (libc)Parsing of Floats.
* wcstoll: (libc)Parsing of Integers.
* wcstombs: (libc)Non-reentrant String Conversion.
* wcstoq: (libc)Parsing of Integers.
* wcstoul: (libc)Parsing of Integers.
* wcstoull: (libc)Parsing of Integers.
* wcstoumax: (libc)Parsing of Integers.
* wcstouq: (libc)Parsing of Integers.
* wcswcs: (libc)Search Functions.
* wcsxfrm: (libc)Collation Functions.
* wctob: (libc)Converting a Character.
* wctomb: (libc)Non-reentrant Character Conversion.
* wctrans: (libc)Wide Character Case Conversion.
* wctype: (libc)Classification of Wide Characters.
* wmemchr: (libc)Search Functions.
* wmemcmp: (libc)String/Array Comparison.
* wmemcpy: (libc)Copying and Concatenation.
* wmemmove: (libc)Copying and Concatenation.
* wmempcpy: (libc)Copying and Concatenation.
* wmemset: (libc)Copying and Concatenation.
* wordexp: (libc)Calling Wordexp.
* wordfree: (libc)Calling Wordexp.
* wprintf: (libc)Formatted Output Functions.
* write: (libc)I/O Primitives.
* writev: (libc)Scatter-Gather.
* wscanf: (libc)Formatted Input Functions.
* y0: (libc)Special Functions.
* y0f: (libc)Special Functions.
* y0l: (libc)Special Functions.
* y1: (libc)Special Functions.
* y1f: (libc)Special Functions.
* y1l: (libc)Special Functions.
* yn: (libc)Special Functions.
* ynf: (libc)Special Functions.
* ynl: (libc)Special Functions.
END-INFO-DIR-ENTRY


File: libc.info,  Node: Obstack Functions,  Next: Growing Objects,  Prev: Freeing Obstack Objects,  Up: Obstacks

3.2.4.5 Obstack Functions and Macros
....................................

The interfaces for using obstacks may be defined either as functions or
as macros, depending on the compiler.  The obstack facility works with
all C compilers, including both ISO C and traditional C, but there are
precautions you must take if you plan to use compilers other than GNU C.

   If you are using an old-fashioned non-ISO C compiler, all the obstack
"functions" are actually defined only as macros.  You can call these
macros like functions, but you cannot use them in any other way (for
example, you cannot take their address).

   Calling the macros requires a special precaution: namely, the first
operand (the obstack pointer) may not contain any side effects, because
it may be computed more than once.  For example, if you write this:

     obstack_alloc (get_obstack (), 4);

you will find that 'get_obstack' may be called several times.  If you
use '*obstack_list_ptr++' as the obstack pointer argument, you will get
very strange results since the incrementation may occur several times.

   In ISO C, each function has both a macro definition and a function
definition.  The function definition is used if you take the address of
the function without calling it.  An ordinary call uses the macro
definition by default, but you can request the function definition
instead by writing the function name in parentheses, as shown here:

     char *x;
     void *(*funcp) ();
     /* Use the macro.  */
     x = (char *) obstack_alloc (obptr, size);
     /* Call the function.  */
     x = (char *) (obstack_alloc) (obptr, size);
     /* Take the address of the function.  */
     funcp = obstack_alloc;

This is the same situation that exists in ISO C for the standard library
functions.  *Note Macro Definitions::.

   *Warning:* When you do use the macros, you must observe the
precaution of avoiding side effects in the first operand, even in ISO C.

   If you use the GNU C compiler, this precaution is not necessary,
because various language extensions in GNU C permit defining the macros
so as to compute each argument only once.


File: libc.info,  Node: Growing Objects,  Next: Extra Fast Growing,  Prev: Obstack Functions,  Up: Obstacks

3.2.4.6 Growing Objects
.......................

Because memory in obstack chunks is used sequentially, it is possible to
build up an object step by step, adding one or more bytes at a time to
the end of the object.  With this technique, you do not need to know how
much data you will put in the object until you come to the end of it.
We call this the technique of "growing objects".  The special functions
for adding data to the growing object are described in this section.

   You don't need to do anything special when you start to grow an
object.  Using one of the functions to add data to the object
automatically starts it.  However, it is necessary to say explicitly
when the object is finished.  This is done with the function
'obstack_finish'.

   The actual address of the object thus built up is not known until the
object is finished.  Until then, it always remains possible that you
will add so much data that the object must be copied into a new chunk.

   While the obstack is in use for a growing object, you cannot use it
for ordinary allocation of another object.  If you try to do so, the
space already added to the growing object will become part of the other
object.

 -- Function: void obstack_blank (struct obstack *OBSTACK-PTR, int SIZE)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt mem | *Note POSIX Safety Concepts::.

     The most basic function for adding to a growing object is
     'obstack_blank', which adds space without initializing it.

 -- Function: void obstack_grow (struct obstack *OBSTACK-PTR, void
          *DATA, int SIZE)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt mem | *Note POSIX Safety Concepts::.

     To add a block of initialized space, use 'obstack_grow', which is
     the growing-object analogue of 'obstack_copy'.  It adds SIZE bytes
     of data to the growing object, copying the contents from DATA.

 -- Function: void obstack_grow0 (struct obstack *OBSTACK-PTR, void
          *DATA, int SIZE)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt mem | *Note POSIX Safety Concepts::.

     This is the growing-object analogue of 'obstack_copy0'.  It adds
     SIZE bytes copied from DATA, followed by an additional null
     character.

 -- Function: void obstack_1grow (struct obstack *OBSTACK-PTR, char C)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt mem | *Note POSIX Safety Concepts::.

     To add one character at a time, use the function 'obstack_1grow'.
     It adds a single byte containing C to the growing object.

 -- Function: void obstack_ptr_grow (struct obstack *OBSTACK-PTR, void
          *DATA)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt mem | *Note POSIX Safety Concepts::.

     Adding the value of a pointer one can use the function
     'obstack_ptr_grow'.  It adds 'sizeof (void *)' bytes containing the
     value of DATA.

 -- Function: void obstack_int_grow (struct obstack *OBSTACK-PTR, int
          DATA)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt mem | *Note POSIX Safety Concepts::.

     A single value of type 'int' can be added by using the
     'obstack_int_grow' function.  It adds 'sizeof (int)' bytes to the
     growing object and initializes them with the value of DATA.

 -- Function: void * obstack_finish (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt | *Note POSIX Safety Concepts::.

     When you are finished growing the object, use the function
     'obstack_finish' to close it off and return its final address.

     Once you have finished the object, the obstack is available for
     ordinary allocation or for growing another object.

     This function can return a null pointer under the same conditions
     as 'obstack_alloc' (*note Allocation in an Obstack::).

   When you build an object by growing it, you will probably need to
know afterward how long it became.  You need not keep track of this as
you grow the object, because you can find out the length from the
obstack just before finishing the object with the function
'obstack_object_size', declared as follows:

 -- Function: int obstack_object_size (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Safe | *Note
     POSIX Safety Concepts::.

     This function returns the current size of the growing object, in
     bytes.  Remember to call this function _before_ finishing the
     object.  After it is finished, 'obstack_object_size' will return
     zero.

   If you have started growing an object and wish to cancel it, you
should finish it and then free it, like this:

     obstack_free (obstack_ptr, obstack_finish (obstack_ptr));

This has no effect if no object was growing.

   You can use 'obstack_blank' with a negative size argument to make the
current object smaller.  Just don't try to shrink it beyond zero
length--there's no telling what will happen if you do that.


File: libc.info,  Node: Extra Fast Growing,  Next: Status of an Obstack,  Prev: Growing Objects,  Up: Obstacks

3.2.4.7 Extra Fast Growing Objects
..................................

The usual functions for growing objects incur overhead for checking
whether there is room for the new growth in the current chunk.  If you
are frequently constructing objects in small steps of growth, this
overhead can be significant.

   You can reduce the overhead by using special "fast growth" functions
that grow the object without checking.  In order to have a robust
program, you must do the checking yourself.  If you do this checking in
the simplest way each time you are about to add data to the object, you
have not saved anything, because that is what the ordinary growth
functions do.  But if you can arrange to check less often, or check more
efficiently, then you make the program faster.

   The function 'obstack_room' returns the amount of room available in
the current chunk.  It is declared as follows:

 -- Function: int obstack_room (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Safe | *Note
     POSIX Safety Concepts::.

     This returns the number of bytes that can be added safely to the
     current growing object (or to an object about to be started) in
     obstack OBSTACK using the fast growth functions.

   While you know there is room, you can use these fast growth functions
for adding data to a growing object:

 -- Function: void obstack_1grow_fast (struct obstack *OBSTACK-PTR, char
          C)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Unsafe
     corrupt mem | *Note POSIX Safety Concepts::.

     The function 'obstack_1grow_fast' adds one byte containing the
     character C to the growing object in obstack OBSTACK-PTR.

 -- Function: void obstack_ptr_grow_fast (struct obstack *OBSTACK-PTR,
          void *DATA)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Safe | *Note
     POSIX Safety Concepts::.

     The function 'obstack_ptr_grow_fast' adds 'sizeof (void *)' bytes
     containing the value of DATA to the growing object in obstack
     OBSTACK-PTR.

 -- Function: void obstack_int_grow_fast (struct obstack *OBSTACK-PTR,
          int DATA)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Safe | *Note
     POSIX Safety Concepts::.

     The function 'obstack_int_grow_fast' adds 'sizeof (int)' bytes
     containing the value of DATA to the growing object in obstack
     OBSTACK-PTR.

 -- Function: void obstack_blank_fast (struct obstack *OBSTACK-PTR, int
          SIZE)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Safe | *Note
     POSIX Safety Concepts::.

     The function 'obstack_blank_fast' adds SIZE bytes to the growing
     object in obstack OBSTACK-PTR without initializing them.

   When you check for space using 'obstack_room' and there is not enough
room for what you want to add, the fast growth functions are not safe.
In this case, simply use the corresponding ordinary growth function
instead.  Very soon this will copy the object to a new chunk; then there
will be lots of room available again.

   So, each time you use an ordinary growth function, check afterward
for sufficient space using 'obstack_room'.  Once the object is copied to
a new chunk, there will be plenty of space again, so the program will
start using the fast growth functions again.

   Here is an example:

     void
     add_string (struct obstack *obstack, const char *ptr, int len)
     {
       while (len > 0)
         {
           int room = obstack_room (obstack);
           if (room == 0)
             {
               /* Not enough room. Add one character slowly,
                  which may copy to a new chunk and make room.  */
               obstack_1grow (obstack, *ptr++);
               len--;
             }
           else
             {
               if (room > len)
                 room = len;
               /* Add fast as much as we have room for. */
               len -= room;
               while (room-- > 0)
                 obstack_1grow_fast (obstack, *ptr++);
             }
         }
     }


File: libc.info,  Node: Status of an Obstack,  Next: Obstacks Data Alignment,  Prev: Extra Fast Growing,  Up: Obstacks

3.2.4.8 Status of an Obstack
............................

Here are functions that provide information on the current status of
allocation in an obstack.  You can use them to learn about an object
while still growing it.

 -- Function: void * obstack_base (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function returns the tentative address of the beginning of the
     currently growing object in OBSTACK-PTR.  If you finish the object
     immediately, it will have that address.  If you make it larger
     first, it may outgrow the current chunk--then its address will
     change!

     If no object is growing, this value says where the next object you
     allocate will start (once again assuming it fits in the current
     chunk).

 -- Function: void * obstack_next_free (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function returns the address of the first free byte in the
     current chunk of obstack OBSTACK-PTR.  This is the end of the
     currently growing object.  If no object is growing,
     'obstack_next_free' returns the same value as 'obstack_base'.

 -- Function: int obstack_object_size (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe race:obstack-ptr | AS-Safe | AC-Safe | *Note
     POSIX Safety Concepts::.

     This function returns the size in bytes of the currently growing
     object.  This is equivalent to

          obstack_next_free (OBSTACK-PTR) - obstack_base (OBSTACK-PTR)


File: libc.info,  Node: Obstacks Data Alignment,  Next: Obstack Chunks,  Prev: Status of an Obstack,  Up: Obstacks

3.2.4.9 Alignment of Data in Obstacks
.....................................

Each obstack has an "alignment boundary"; each object allocated in the
obstack automatically starts on an address that is a multiple of the
specified boundary.  By default, this boundary is aligned so that the
object can hold any type of data.

   To access an obstack's alignment boundary, use the macro
'obstack_alignment_mask', whose function prototype looks like this:

 -- Macro: int obstack_alignment_mask (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The value is a bit mask; a bit that is 1 indicates that the
     corresponding bit in the address of an object should be 0.  The
     mask value should be one less than a power of 2; the effect is that
     all object addresses are multiples of that power of 2.  The default
     value of the mask is a value that allows aligned objects to hold
     any type of data: for example, if its value is 3, any type of data
     can be stored at locations whose addresses are multiples of 4.  A
     mask value of 0 means an object can start on any multiple of 1
     (that is, no alignment is required).

     The expansion of the macro 'obstack_alignment_mask' is an lvalue,
     so you can alter the mask by assignment.  For example, this
     statement:

          obstack_alignment_mask (obstack_ptr) = 0;

     has the effect of turning off alignment processing in the specified
     obstack.

   Note that a change in alignment mask does not take effect until
_after_ the next time an object is allocated or finished in the obstack.
If you are not growing an object, you can make the new alignment mask
take effect immediately by calling 'obstack_finish'.  This will finish a
zero-length object and then do proper alignment for the next object.


File: libc.info,  Node: Obstack Chunks,  Next: Summary of Obstacks,  Prev: Obstacks Data Alignment,  Up: Obstacks

3.2.4.10 Obstack Chunks
.......................

Obstacks work by allocating space for themselves in large chunks, and
then parceling out space in the chunks to satisfy your requests.  Chunks
are normally 4096 bytes long unless you specify a different chunk size.
The chunk size includes 8 bytes of overhead that are not actually used
for storing objects.  Regardless of the specified size, longer chunks
will be allocated when necessary for long objects.

   The obstack library allocates chunks by calling the function
'obstack_chunk_alloc', which you must define.  When a chunk is no longer
needed because you have freed all the objects in it, the obstack library
frees the chunk by calling 'obstack_chunk_free', which you must also
define.

   These two must be defined (as macros) or declared (as functions) in
each source file that uses 'obstack_init' (*note Creating Obstacks::).
Most often they are defined as macros like this:

     #define obstack_chunk_alloc malloc
     #define obstack_chunk_free free

   Note that these are simple macros (no arguments).  Macro definitions
with arguments will not work!  It is necessary that
'obstack_chunk_alloc' or 'obstack_chunk_free', alone, expand into a
function name if it is not itself a function name.

   If you allocate chunks with 'malloc', the chunk size should be a
power of 2.  The default chunk size, 4096, was chosen because it is long
enough to satisfy many typical requests on the obstack yet short enough
not to waste too much memory in the portion of the last chunk not yet
used.

 -- Macro: int obstack_chunk_size (struct obstack *OBSTACK-PTR)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This returns the chunk size of the given obstack.

   Since this macro expands to an lvalue, you can specify a new chunk
size by assigning it a new value.  Doing so does not affect the chunks
already allocated, but will change the size of chunks allocated for that
particular obstack in the future.  It is unlikely to be useful to make
the chunk size smaller, but making it larger might improve efficiency if
you are allocating many objects whose size is comparable to the chunk
size.  Here is how to do so cleanly:

     if (obstack_chunk_size (obstack_ptr) < NEW-CHUNK-SIZE)
       obstack_chunk_size (obstack_ptr) = NEW-CHUNK-SIZE;


File: libc.info,  Node: Summary of Obstacks,  Prev: Obstack Chunks,  Up: Obstacks

3.2.4.11 Summary of Obstack Functions
.....................................

Here is a summary of all the functions associated with obstacks.  Each
takes the address of an obstack ('struct obstack *') as its first
argument.

'void obstack_init (struct obstack *OBSTACK-PTR)'
     Initialize use of an obstack.  *Note Creating Obstacks::.

'void *obstack_alloc (struct obstack *OBSTACK-PTR, int SIZE)'
     Allocate an object of SIZE uninitialized bytes.  *Note Allocation
     in an Obstack::.

'void *obstack_copy (struct obstack *OBSTACK-PTR, void *ADDRESS, int SIZE)'
     Allocate an object of SIZE bytes, with contents copied from
     ADDRESS.  *Note Allocation in an Obstack::.

'void *obstack_copy0 (struct obstack *OBSTACK-PTR, void *ADDRESS, int SIZE)'
     Allocate an object of SIZE+1 bytes, with SIZE of them copied from
     ADDRESS, followed by a null character at the end.  *Note Allocation
     in an Obstack::.

'void obstack_free (struct obstack *OBSTACK-PTR, void *OBJECT)'
     Free OBJECT (and everything allocated in the specified obstack more
     recently than OBJECT).  *Note Freeing Obstack Objects::.

'void obstack_blank (struct obstack *OBSTACK-PTR, int SIZE)'
     Add SIZE uninitialized bytes to a growing object.  *Note Growing
     Objects::.

'void obstack_grow (struct obstack *OBSTACK-PTR, void *ADDRESS, int SIZE)'
     Add SIZE bytes, copied from ADDRESS, to a growing object.  *Note
     Growing Objects::.

'void obstack_grow0 (struct obstack *OBSTACK-PTR, void *ADDRESS, int SIZE)'
     Add SIZE bytes, copied from ADDRESS, to a growing object, and then
     add another byte containing a null character.  *Note Growing
     Objects::.

'void obstack_1grow (struct obstack *OBSTACK-PTR, char DATA-CHAR)'
     Add one byte containing DATA-CHAR to a growing object.  *Note
     Growing Objects::.

'void *obstack_finish (struct obstack *OBSTACK-PTR)'
     Finalize the object that is growing and return its permanent
     address.  *Note Growing Objects::.

'int obstack_object_size (struct obstack *OBSTACK-PTR)'
     Get the current size of the currently growing object.  *Note
     Growing Objects::.

'void obstack_blank_fast (struct obstack *OBSTACK-PTR, int SIZE)'
     Add SIZE uninitialized bytes to a growing object without checking
     that there is enough room.  *Note Extra Fast Growing::.

'void obstack_1grow_fast (struct obstack *OBSTACK-PTR, char DATA-CHAR)'
     Add one byte containing DATA-CHAR to a growing object without
     checking that there is enough room.  *Note Extra Fast Growing::.

'int obstack_room (struct obstack *OBSTACK-PTR)'
     Get the amount of room now available for growing the current
     object.  *Note Extra Fast Growing::.

'int obstack_alignment_mask (struct obstack *OBSTACK-PTR)'
     The mask used for aligning the beginning of an object.  This is an
     lvalue.  *Note Obstacks Data Alignment::.

'int obstack_chunk_size (struct obstack *OBSTACK-PTR)'
     The size for allocating chunks.  This is an lvalue.  *Note Obstack
     Chunks::.

'void *obstack_base (struct obstack *OBSTACK-PTR)'
     Tentative starting address of the currently growing object.  *Note
     Status of an Obstack::.

'void *obstack_next_free (struct obstack *OBSTACK-PTR)'
     Address just after the end of the currently growing object.  *Note
     Status of an Obstack::.


File: libc.info,  Node: Variable Size Automatic,  Prev: Obstacks,  Up: Memory Allocation

3.2.5 Automatic Storage with Variable Size
------------------------------------------

The function 'alloca' supports a kind of half-dynamic allocation in
which blocks are allocated dynamically but freed automatically.

   Allocating a block with 'alloca' is an explicit action; you can
allocate as many blocks as you wish, and compute the size at run time.
But all the blocks are freed when you exit the function that 'alloca'
was called from, just as if they were automatic variables declared in
that function.  There is no way to free the space explicitly.

   The prototype for 'alloca' is in 'stdlib.h'.  This function is a BSD
extension.

 -- Function: void * alloca (size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The return value of 'alloca' is the address of a block of SIZE
     bytes of memory, allocated in the stack frame of the calling
     function.

   Do not use 'alloca' inside the arguments of a function call--you will
get unpredictable results, because the stack space for the 'alloca'
would appear on the stack in the middle of the space for the function
arguments.  An example of what to avoid is 'foo (x, alloca (4), y)'.

* Menu:

* Alloca Example::              Example of using 'alloca'.
* Advantages of Alloca::        Reasons to use 'alloca'.
* Disadvantages of Alloca::     Reasons to avoid 'alloca'.
* GNU C Variable-Size Arrays::  Only in GNU C, here is an alternative
				 method of allocating dynamically and
				 freeing automatically.


File: libc.info,  Node: Alloca Example,  Next: Advantages of Alloca,  Up: Variable Size Automatic

3.2.5.1 'alloca' Example
........................

As an example of the use of 'alloca', here is a function that opens a
file name made from concatenating two argument strings, and returns a
file descriptor or minus one signifying failure:

     int
     open2 (char *str1, char *str2, int flags, int mode)
     {
       char *name = (char *) alloca (strlen (str1) + strlen (str2) + 1);
       stpcpy (stpcpy (name, str1), str2);
       return open (name, flags, mode);
     }

Here is how you would get the same results with 'malloc' and 'free':

     int
     open2 (char *str1, char *str2, int flags, int mode)
     {
       char *name = (char *) malloc (strlen (str1) + strlen (str2) + 1);
       int desc;
       if (name == 0)
         fatal ("virtual memory exceeded");
       stpcpy (stpcpy (name, str1), str2);
       desc = open (name, flags, mode);
       free (name);
       return desc;
     }

   As you can see, it is simpler with 'alloca'.  But 'alloca' has other,
more important advantages, and some disadvantages.


File: libc.info,  Node: Advantages of Alloca,  Next: Disadvantages of Alloca,  Prev: Alloca Example,  Up: Variable Size Automatic

3.2.5.2 Advantages of 'alloca'
..............................

Here are the reasons why 'alloca' may be preferable to 'malloc':

   * Using 'alloca' wastes very little space and is very fast.  (It is
     open-coded by the GNU C compiler.)

   * Since 'alloca' does not have separate pools for different sizes of
     block, space used for any size block can be reused for any other
     size.  'alloca' does not cause memory fragmentation.

   * Nonlocal exits done with 'longjmp' (*note Non-Local Exits::)
     automatically free the space allocated with 'alloca' when they exit
     through the function that called 'alloca'.  This is the most
     important reason to use 'alloca'.

     To illustrate this, suppose you have a function
     'open_or_report_error' which returns a descriptor, like 'open', if
     it succeeds, but does not return to its caller if it fails.  If the
     file cannot be opened, it prints an error message and jumps out to
     the command level of your program using 'longjmp'.  Let's change
     'open2' (*note Alloca Example::) to use this subroutine:

          int
          open2 (char *str1, char *str2, int flags, int mode)
          {
            char *name = (char *) alloca (strlen (str1) + strlen (str2) + 1);
            stpcpy (stpcpy (name, str1), str2);
            return open_or_report_error (name, flags, mode);
          }

     Because of the way 'alloca' works, the memory it allocates is freed
     even when an error occurs, with no special effort required.

     By contrast, the previous definition of 'open2' (which uses
     'malloc' and 'free') would develop a memory leak if it were changed
     in this way.  Even if you are willing to make more changes to fix
     it, there is no easy way to do so.


File: libc.info,  Node: Disadvantages of Alloca,  Next: GNU C Variable-Size Arrays,  Prev: Advantages of Alloca,  Up: Variable Size Automatic

3.2.5.3 Disadvantages of 'alloca'
.................................

These are the disadvantages of 'alloca' in comparison with 'malloc':

   * If you try to allocate more memory than the machine can provide,
     you don't get a clean error message.  Instead you get a fatal
     signal like the one you would get from an infinite recursion;
     probably a segmentation violation (*note Program Error Signals::).

   * Some non-GNU systems fail to support 'alloca', so it is less
     portable.  However, a slower emulation of 'alloca' written in C is
     available for use on systems with this deficiency.


File: libc.info,  Node: GNU C Variable-Size Arrays,  Prev: Disadvantages of Alloca,  Up: Variable Size Automatic

3.2.5.4 GNU C Variable-Size Arrays
..................................

In GNU C, you can replace most uses of 'alloca' with an array of
variable size.  Here is how 'open2' would look then:

     int open2 (char *str1, char *str2, int flags, int mode)
     {
       char name[strlen (str1) + strlen (str2) + 1];
       stpcpy (stpcpy (name, str1), str2);
       return open (name, flags, mode);
     }

   But 'alloca' is not always equivalent to a variable-sized array, for
several reasons:

   * A variable size array's space is freed at the end of the scope of
     the name of the array.  The space allocated with 'alloca' remains
     until the end of the function.

   * It is possible to use 'alloca' within a loop, allocating an
     additional block on each iteration.  This is impossible with
     variable-sized arrays.

   *NB:* If you mix use of 'alloca' and variable-sized arrays within one
function, exiting a scope in which a variable-sized array was declared
frees all blocks allocated with 'alloca' during the execution of that
scope.


File: libc.info,  Node: Resizing the Data Segment,  Next: Locking Pages,  Prev: Memory Allocation,  Up: Memory

3.3 Resizing the Data Segment
=============================

The symbols in this section are declared in 'unistd.h'.

   You will not normally use the functions in this section, because the
functions described in *note Memory Allocation:: are easier to use.
Those are interfaces to a GNU C Library memory allocator that uses the
functions below itself.  The functions below are simple interfaces to
system calls.

 -- Function: int brk (void *ADDR)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'brk' sets the high end of the calling process' data segment to
     ADDR.

     The address of the end of a segment is defined to be the address of
     the last byte in the segment plus 1.

     The function has no effect if ADDR is lower than the low end of the
     data segment.  (This is considered success, by the way).

     The function fails if it would cause the data segment to overlap
     another segment or exceed the process' data storage limit (*note
     Limits on Resources::).

     The function is named for a common historical case where data
     storage and the stack are in the same segment.  Data storage
     allocation grows upward from the bottom of the segment while the
     stack grows downward toward it from the top of the segment and the
     curtain between them is called the "break".

     The return value is zero on success.  On failure, the return value
     is '-1' and 'errno' is set accordingly.  The following 'errno'
     values are specific to this function:

     'ENOMEM'
          The request would cause the data segment to overlap another
          segment or exceed the process' data storage limit.

 -- Function: void *sbrk (ptrdiff_t DELTA)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is the same as 'brk' except that you specify the new
     end of the data segment as an offset DELTA from the current end and
     on success the return value is the address of the resulting end of
     the data segment instead of zero.

     This means you can use 'sbrk(0)' to find out what the current end
     of the data segment is.


File: libc.info,  Node: Locking Pages,  Prev: Resizing the Data Segment,  Up: Memory

3.4 Locking Pages
=================

You can tell the system to associate a particular virtual memory page
with a real page frame and keep it that way -- i.e., cause the page to
be paged in if it isn't already and mark it so it will never be paged
out and consequently will never cause a page fault.  This is called
"locking" a page.

   The functions in this chapter lock and unlock the calling process'
pages.

* Menu:

* Why Lock Pages::                Reasons to read this section.
* Locked Memory Details::         Everything you need to know locked
                                    memory
* Page Lock Functions::           Here's how to do it.


File: libc.info,  Node: Why Lock Pages,  Next: Locked Memory Details,  Up: Locking Pages

3.4.1 Why Lock Pages
--------------------

Because page faults cause paged out pages to be paged in transparently,
a process rarely needs to be concerned about locking pages.  However,
there are two reasons people sometimes are:

   * Speed.  A page fault is transparent only insofar as the process is
     not sensitive to how long it takes to do a simple memory access.
     Time-critical processes, especially realtime processes, may not be
     able to wait or may not be able to tolerate variance in execution
     speed.

     A process that needs to lock pages for this reason probably also
     needs priority among other processes for use of the CPU. *Note
     Priority::.

     In some cases, the programmer knows better than the system's demand
     paging allocator which pages should remain in real memory to
     optimize system performance.  In this case, locking pages can help.

   * Privacy.  If you keep secrets in virtual memory and that virtual
     memory gets paged out, that increases the chance that the secrets
     will get out.  If a password gets written out to disk swap space,
     for example, it might still be there long after virtual and real
     memory have been wiped clean.

   Be aware that when you lock a page, that's one fewer page frame that
can be used to back other virtual memory (by the same or other
processes), which can mean more page faults, which means the system runs
more slowly.  In fact, if you lock enough memory, some programs may not
be able to run at all for lack of real memory.


File: libc.info,  Node: Locked Memory Details,  Next: Page Lock Functions,  Prev: Why Lock Pages,  Up: Locking Pages

3.4.2 Locked Memory Details
---------------------------

A memory lock is associated with a virtual page, not a real frame.  The
paging rule is: If a frame backs at least one locked page, don't page it
out.

   Memory locks do not stack.  I.e., you can't lock a particular page
twice so that it has to be unlocked twice before it is truly unlocked.
It is either locked or it isn't.

   A memory lock persists until the process that owns the memory
explicitly unlocks it.  (But process termination and exec cause the
virtual memory to cease to exist, which you might say means it isn't
locked any more).

   Memory locks are not inherited by child processes.  (But note that on
a modern Unix system, immediately after a fork, the parent's and the
child's virtual address space are backed by the same real page frames,
so the child enjoys the parent's locks).  *Note Creating a Process::.

   Because of its ability to impact other processes, only the superuser
can lock a page.  Any process can unlock its own page.

   The system sets limits on the amount of memory a process can have
locked and the amount of real memory it can have dedicated to it.  *Note
Limits on Resources::.

   In Linux, locked pages aren't as locked as you might think.  Two
virtual pages that are not shared memory can nonetheless be backed by
the same real frame.  The kernel does this in the name of efficiency
when it knows both virtual pages contain identical data, and does it
even if one or both of the virtual pages are locked.

   But when a process modifies one of those pages, the kernel must get
it a separate frame and fill it with the page's data.  This is known as
a "copy-on-write page fault".  It takes a small amount of time and in a
pathological case, getting that frame may require I/O.

   To make sure this doesn't happen to your program, don't just lock the
pages.  Write to them as well, unless you know you won't write to them
ever.  And to make sure you have pre-allocated frames for your stack,
enter a scope that declares a C automatic variable larger than the
maximum stack size you will need, set it to something, then return from
its scope.


File: libc.info,  Node: Page Lock Functions,  Prev: Locked Memory Details,  Up: Locking Pages

3.4.3 Functions To Lock And Unlock Pages
----------------------------------------

The symbols in this section are declared in 'sys/mman.h'.  These
functions are defined by POSIX.1b, but their availability depends on
your kernel.  If your kernel doesn't allow these functions, they exist
but always fail.  They _are_ available with a Linux kernel.

   *Portability Note:* POSIX.1b requires that when the 'mlock' and
'munlock' functions are available, the file 'unistd.h' define the macro
'_POSIX_MEMLOCK_RANGE' and the file 'limits.h' define the macro
'PAGESIZE' to be the size of a memory page in bytes.  It requires that
when the 'mlockall' and 'munlockall' functions are available, the
'unistd.h' file define the macro '_POSIX_MEMLOCK'.  The GNU C Library
conforms to this requirement.

 -- Function: int mlock (const void *ADDR, size_t LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'mlock' locks a range of the calling process' virtual pages.

     The range of memory starts at address ADDR and is LEN bytes long.
     Actually, since you must lock whole pages, it is the range of pages
     that include any part of the specified range.

     When the function returns successfully, each of those pages is
     backed by (connected to) a real frame (is resident) and is marked
     to stay that way.  This means the function may cause page-ins and
     have to wait for them.

     When the function fails, it does not affect the lock status of any
     pages.

     The return value is zero if the function succeeds.  Otherwise, it
     is '-1' and 'errno' is set accordingly.  'errno' values specific to
     this function are:

     'ENOMEM'
             * At least some of the specified address range does not
               exist in the calling process' virtual address space.
             * The locking would cause the process to exceed its locked
               page limit.

     'EPERM'
          The calling process is not superuser.

     'EINVAL'
          LEN is not positive.

     'ENOSYS'
          The kernel does not provide 'mlock' capability.

     You can lock _all_ a process' memory with 'mlockall'.  You unlock
     memory with 'munlock' or 'munlockall'.

     To avoid all page faults in a C program, you have to use
     'mlockall', because some of the memory a program uses is hidden
     from the C code, e.g.  the stack and automatic variables, and you
     wouldn't know what address to tell 'mlock'.

 -- Function: int munlock (const void *ADDR, size_t LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'munlock' unlocks a range of the calling process' virtual pages.

     'munlock' is the inverse of 'mlock' and functions completely
     analogously to 'mlock', except that there is no 'EPERM' failure.

 -- Function: int mlockall (int FLAGS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'mlockall' locks all the pages in a process' virtual memory address
     space, and/or any that are added to it in the future.  This
     includes the pages of the code, data and stack segment, as well as
     shared libraries, user space kernel data, shared memory, and memory
     mapped files.

     FLAGS is a string of single bit flags represented by the following
     macros.  They tell 'mlockall' which of its functions you want.  All
     other bits must be zero.

     'MCL_CURRENT'
          Lock all pages which currently exist in the calling process'
          virtual address space.

     'MCL_FUTURE'
          Set a mode such that any pages added to the process' virtual
          address space in the future will be locked from birth.  This
          mode does not affect future address spaces owned by the same
          process so exec, which replaces a process' address space,
          wipes out 'MCL_FUTURE'.  *Note Executing a File::.

     When the function returns successfully, and you specified
     'MCL_CURRENT', all of the process' pages are backed by (connected
     to) real frames (they are resident) and are marked to stay that
     way.  This means the function may cause page-ins and have to wait
     for them.

     When the process is in 'MCL_FUTURE' mode because it successfully
     executed this function and specified 'MCL_CURRENT', any system call
     by the process that requires space be added to its virtual address
     space fails with 'errno' = 'ENOMEM' if locking the additional space
     would cause the process to exceed its locked page limit.  In the
     case that the address space addition that can't be accommodated is
     stack expansion, the stack expansion fails and the kernel sends a
     'SIGSEGV' signal to the process.

     When the function fails, it does not affect the lock status of any
     pages or the future locking mode.

     The return value is zero if the function succeeds.  Otherwise, it
     is '-1' and 'errno' is set accordingly.  'errno' values specific to
     this function are:

     'ENOMEM'
             * At least some of the specified address range does not
               exist in the calling process' virtual address space.
             * The locking would cause the process to exceed its locked
               page limit.

     'EPERM'
          The calling process is not superuser.

     'EINVAL'
          Undefined bits in FLAGS are not zero.

     'ENOSYS'
          The kernel does not provide 'mlockall' capability.

     You can lock just specific pages with 'mlock'.  You unlock pages
     with 'munlockall' and 'munlock'.

 -- Function: int munlockall (void)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'munlockall' unlocks every page in the calling process' virtual
     address space and turn off 'MCL_FUTURE' future locking mode.

     The return value is zero if the function succeeds.  Otherwise, it
     is '-1' and 'errno' is set accordingly.  The only way this function
     can fail is for generic reasons that all functions and system calls
     can fail, so there are no specific 'errno' values.


File: libc.info,  Node: Character Handling,  Next: String and Array Utilities,  Prev: Memory,  Up: Top

4 Character Handling
********************

Programs that work with characters and strings often need to classify a
character--is it alphabetic, is it a digit, is it whitespace, and so
on--and perform case conversion operations on characters.  The functions
in the header file 'ctype.h' are provided for this purpose.

   Since the choice of locale and character set can alter the
classifications of particular character codes, all of these functions
are affected by the current locale.  (More precisely, they are affected
by the locale currently selected for character classification--the
'LC_CTYPE' category; see *note Locale Categories::.)

   The ISO C standard specifies two different sets of functions.  The
one set works on 'char' type characters, the other one on 'wchar_t' wide
characters (*note Extended Char Intro::).

* Menu:

* Classification of Characters::       Testing whether characters are
			                letters, digits, punctuation, etc.

* Case Conversion::                    Case mapping, and the like.
* Classification of Wide Characters::  Character class determination for
                                        wide characters.
* Using Wide Char Classes::            Notes on using the wide character
                                        classes.
* Wide Character Case Conversion::     Mapping of wide characters.


File: libc.info,  Node: Classification of Characters,  Next: Case Conversion,  Up: Character Handling

4.1 Classification of Characters
================================

This section explains the library functions for classifying characters.
For example, 'isalpha' is the function to test for an alphabetic
character.  It takes one argument, the character to test, and returns a
nonzero integer if the character is alphabetic, and zero otherwise.  You
would use it like this:

     if (isalpha (c))
       printf ("The character `%c' is alphabetic.\n", c);

   Each of the functions in this section tests for membership in a
particular class of characters; each has a name starting with 'is'.
Each of them takes one argument, which is a character to test, and
returns an 'int' which is treated as a boolean value.  The character
argument is passed as an 'int', and it may be the constant value 'EOF'
instead of a real character.

   The attributes of any given character can vary between locales.
*Note Locales::, for more information on locales.

   These functions are declared in the header file 'ctype.h'.

 -- Function: int islower (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a lower-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

 -- Function: int isupper (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is an upper-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

 -- Function: int isalpha (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is an alphabetic character (a letter).  If
     'islower' or 'isupper' is true of a character, then 'isalpha' is
     also true.

     In some locales, there may be additional characters for which
     'isalpha' is true--letters which are neither upper case nor lower
     case.  But in the standard '"C"' locale, there are no such
     additional characters.

 -- Function: int isdigit (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a decimal digit ('0' through '9').

 -- Function: int isalnum (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is an alphanumeric character (a letter or
     number); in other words, if either 'isalpha' or 'isdigit' is true
     of a character, then 'isalnum' is also true.

 -- Function: int isxdigit (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a hexadecimal digit.  Hexadecimal digits
     include the normal decimal digits '0' through '9' and the letters
     'A' through 'F' and 'a' through 'f'.

 -- Function: int ispunct (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a punctuation character.  This means any
     printing character that is not alphanumeric or a space character.

 -- Function: int isspace (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a "whitespace" character.  In the standard
     '"C"' locale, 'isspace' returns true for only the standard
     whitespace characters:

     '' ''
          space

     ''\f''
          formfeed

     ''\n''
          newline

     ''\r''
          carriage return

     ''\t''
          horizontal tab

     ''\v''
          vertical tab

 -- Function: int isblank (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a blank character; that is, a space or a tab.
     This function was originally a GNU extension, but was added in
     ISO C99.

 -- Function: int isgraph (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a graphic character; that is, a character that
     has a glyph associated with it.  The whitespace characters are not
     considered graphic.

 -- Function: int isprint (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a printing character.  Printing characters
     include all the graphic characters, plus the space (' ') character.

 -- Function: int iscntrl (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a control character (that is, a character that
     is not a printing character).

 -- Function: int isascii (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a 7-bit 'unsigned char' value that fits into
     the US/UK ASCII character set.  This function is a BSD extension
     and is also an SVID extension.


File: libc.info,  Node: Case Conversion,  Next: Classification of Wide Characters,  Prev: Classification of Characters,  Up: Character Handling

4.2 Case Conversion
===================

This section explains the library functions for performing conversions
such as case mappings on characters.  For example, 'toupper' converts
any character to upper case if possible.  If the character can't be
converted, 'toupper' returns it unchanged.

   These functions take one argument of type 'int', which is the
character to convert, and return the converted character as an 'int'.
If the conversion is not applicable to the argument given, the argument
is returned unchanged.

   *Compatibility Note:* In pre-ISO C dialects, instead of returning the
argument unchanged, these functions may fail when the argument is not
suitable for the conversion.  Thus for portability, you may need to
write 'islower(c) ? toupper(c) : c' rather than just 'toupper(c)'.

   These functions are declared in the header file 'ctype.h'.

 -- Function: int tolower (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     If C is an upper-case letter, 'tolower' returns the corresponding
     lower-case letter.  If C is not an upper-case letter, C is returned
     unchanged.

 -- Function: int toupper (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     If C is a lower-case letter, 'toupper' returns the corresponding
     upper-case letter.  Otherwise C is returned unchanged.

 -- Function: int toascii (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function converts C to a 7-bit 'unsigned char' value that fits
     into the US/UK ASCII character set, by clearing the high-order
     bits.  This function is a BSD extension and is also an SVID
     extension.

 -- Function: int _tolower (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is identical to 'tolower', and is provided for compatibility
     with the SVID. *Note SVID::.

 -- Function: int _toupper (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is identical to 'toupper', and is provided for compatibility
     with the SVID.


File: libc.info,  Node: Classification of Wide Characters,  Next: Using Wide Char Classes,  Prev: Case Conversion,  Up: Character Handling

4.3 Character class determination for wide characters
=====================================================

Amendment 1 to ISO C90 defines functions to classify wide characters.
Although the original ISO C90 standard already defined the type
'wchar_t', no functions operating on them were defined.

   The general design of the classification functions for wide
characters is more general.  It allows extensions to the set of
available classifications, beyond those which are always available.  The
POSIX standard specifies how extensions can be made, and this is already
implemented in the GNU C Library implementation of the 'localedef'
program.

   The character class functions are normally implemented with bitsets,
with a bitset per character.  For a given character, the appropriate
bitset is read from a table and a test is performed as to whether a
certain bit is set.  Which bit is tested for is determined by the class.

   For the wide character classification functions this is made visible.
There is a type classification type defined, a function to retrieve this
value for a given class, and a function to test whether a given
character is in this class, using the classification value.  On top of
this the normal character classification functions as used for 'char'
objects can be defined.

 -- Data type: wctype_t
     The 'wctype_t' can hold a value which represents a character class.
     The only defined way to generate such a value is by using the
     'wctype' function.

     This type is defined in 'wctype.h'.

 -- Function: wctype_t wctype (const char *PROPERTY)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     The 'wctype' returns a value representing a class of wide
     characters which is identified by the string PROPERTY.  Beside some
     standard properties each locale can define its own ones.  In case
     no property with the given name is known for the current locale
     selected for the 'LC_CTYPE' category, the function returns zero.

     The properties known in every locale are:

     '"alnum"'          '"alpha"'          '"cntrl"'          '"digit"'
     '"graph"'          '"lower"'          '"print"'          '"punct"'
     '"space"'          '"upper"'          '"xdigit"'

     This function is declared in 'wctype.h'.

   To test the membership of a character to one of the non-standard
classes the ISO C standard defines a completely new function.

 -- Function: int iswctype (wint_t WC, wctype_t DESC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function returns a nonzero value if WC is in the character
     class specified by DESC.  DESC must previously be returned by a
     successful call to 'wctype'.

     This function is declared in 'wctype.h'.

   To make it easier to use the commonly-used classification functions,
they are defined in the C library.  There is no need to use 'wctype' if
the property string is one of the known character classes.  In some
situations it is desirable to construct the property strings, and then
it is important that 'wctype' can also handle the standard classes.

 -- Function: int iswalnum (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function returns a nonzero value if WC is an alphanumeric
     character (a letter or number); in other words, if either
     'iswalpha' or 'iswdigit' is true of a character, then 'iswalnum' is
     also true.

     This function can be implemented using

          iswctype (wc, wctype ("alnum"))

     It is declared in 'wctype.h'.

 -- Function: int iswalpha (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is an alphabetic character (a letter).  If
     'iswlower' or 'iswupper' is true of a character, then 'iswalpha' is
     also true.

     In some locales, there may be additional characters for which
     'iswalpha' is true--letters which are neither upper case nor lower
     case.  But in the standard '"C"' locale, there are no such
     additional characters.

     This function can be implemented using

          iswctype (wc, wctype ("alpha"))

     It is declared in 'wctype.h'.

 -- Function: int iswcntrl (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a control character (that is, a character
     that is not a printing character).

     This function can be implemented using

          iswctype (wc, wctype ("cntrl"))

     It is declared in 'wctype.h'.

 -- Function: int iswdigit (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a digit (e.g., '0' through '9').  Please note
     that this function does not only return a nonzero value for
     _decimal_ digits, but for all kinds of digits.  A consequence is
     that code like the following will *not* work unconditionally for
     wide characters:

          n = 0;
          while (iswdigit (*wc))
            {
              n *= 10;
              n += *wc++ - L'0';
            }

     This function can be implemented using

          iswctype (wc, wctype ("digit"))

     It is declared in 'wctype.h'.

 -- Function: int iswgraph (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a graphic character; that is, a character
     that has a glyph associated with it.  The whitespace characters are
     not considered graphic.

     This function can be implemented using

          iswctype (wc, wctype ("graph"))

     It is declared in 'wctype.h'.

 -- Function: int iswlower (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a lower-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

     This function can be implemented using

          iswctype (wc, wctype ("lower"))

     It is declared in 'wctype.h'.

 -- Function: int iswprint (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a printing character.  Printing characters
     include all the graphic characters, plus the space (' ') character.

     This function can be implemented using

          iswctype (wc, wctype ("print"))

     It is declared in 'wctype.h'.

 -- Function: int iswpunct (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a punctuation character.  This means any
     printing character that is not alphanumeric or a space character.

     This function can be implemented using

          iswctype (wc, wctype ("punct"))

     It is declared in 'wctype.h'.

 -- Function: int iswspace (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a "whitespace" character.  In the standard
     '"C"' locale, 'iswspace' returns true for only the standard
     whitespace characters:

     'L' ''
          space

     'L'\f''
          formfeed

     'L'\n''
          newline

     'L'\r''
          carriage return

     'L'\t''
          horizontal tab

     'L'\v''
          vertical tab

     This function can be implemented using

          iswctype (wc, wctype ("space"))

     It is declared in 'wctype.h'.

 -- Function: int iswupper (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is an upper-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

     This function can be implemented using

          iswctype (wc, wctype ("upper"))

     It is declared in 'wctype.h'.

 -- Function: int iswxdigit (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a hexadecimal digit.  Hexadecimal digits
     include the normal decimal digits '0' through '9' and the letters
     'A' through 'F' and 'a' through 'f'.

     This function can be implemented using

          iswctype (wc, wctype ("xdigit"))

     It is declared in 'wctype.h'.

   The GNU C Library also provides a function which is not defined in
the ISO C standard but which is available as a version for single byte
characters as well.

 -- Function: int iswblank (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a blank character; that is, a space or a tab.
     This function was originally a GNU extension, but was added in
     ISO C99.  It is declared in 'wchar.h'.


File: libc.info,  Node: Using Wide Char Classes,  Next: Wide Character Case Conversion,  Prev: Classification of Wide Characters,  Up: Character Handling

4.4 Notes on using the wide character classes
=============================================

The first note is probably not astonishing but still occasionally a
cause of problems.  The 'iswXXX' functions can be implemented using
macros and in fact, the GNU C Library does this.  They are still
available as real functions but when the 'wctype.h' header is included
the macros will be used.  This is the same as the 'char' type versions
of these functions.

   The second note covers something new.  It can be best illustrated by
a (real-world) example.  The first piece of code is an excerpt from the
original code.  It is truncated a bit but the intention should be clear.

     int
     is_in_class (int c, const char *class)
     {
       if (strcmp (class, "alnum") == 0)
         return isalnum (c);
       if (strcmp (class, "alpha") == 0)
         return isalpha (c);
       if (strcmp (class, "cntrl") == 0)
         return iscntrl (c);
       ...
       return 0;
     }

   Now, with the 'wctype' and 'iswctype' you can avoid the 'if'
cascades, but rewriting the code as follows is wrong:

     int
     is_in_class (int c, const char *class)
     {
       wctype_t desc = wctype (class);
       return desc ? iswctype ((wint_t) c, desc) : 0;
     }

   The problem is that it is not guaranteed that the wide character
representation of a single-byte character can be found using casting.
In fact, usually this fails miserably.  The correct solution to this
problem is to write the code as follows:

     int
     is_in_class (int c, const char *class)
     {
       wctype_t desc = wctype (class);
       return desc ? iswctype (btowc (c), desc) : 0;
     }

   *Note Converting a Character::, for more information on 'btowc'.
Note that this change probably does not improve the performance of the
program a lot since the 'wctype' function still has to make the string
comparisons.  It gets really interesting if the 'is_in_class' function
is called more than once for the same class name.  In this case the
variable DESC could be computed once and reused for all the calls.
Therefore the above form of the function is probably not the final one.


File: libc.info,  Node: Wide Character Case Conversion,  Prev: Using Wide Char Classes,  Up: Character Handling

4.5 Mapping of wide characters.
===============================

The classification functions are also generalized by the ISO C standard.
Instead of just allowing the two standard mappings, a locale can contain
others.  Again, the 'localedef' program already supports generating such
locale data files.

 -- Data Type: wctrans_t
     This data type is defined as a scalar type which can hold a value
     representing the locale-dependent character mapping.  There is no
     way to construct such a value apart from using the return value of
     the 'wctrans' function.

     This type is defined in 'wctype.h'.

 -- Function: wctrans_t wctrans (const char *PROPERTY)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     The 'wctrans' function has to be used to find out whether a named
     mapping is defined in the current locale selected for the
     'LC_CTYPE' category.  If the returned value is non-zero, you can
     use it afterwards in calls to 'towctrans'.  If the return value is
     zero no such mapping is known in the current locale.

     Beside locale-specific mappings there are two mappings which are
     guaranteed to be available in every locale:

     '"tolower"'                          '"toupper"'

     These functions are declared in 'wctype.h'.

 -- Function: wint_t towctrans (wint_t WC, wctrans_t DESC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'towctrans' maps the input character WC according to the rules of
     the mapping for which DESC is a descriptor, and returns the value
     it finds.  DESC must be obtained by a successful call to 'wctrans'.

     This function is declared in 'wctype.h'.

   For the generally available mappings, the ISO C standard defines
convenient shortcuts so that it is not necessary to call 'wctrans' for
them.

 -- Function: wint_t towlower (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     If WC is an upper-case letter, 'towlower' returns the corresponding
     lower-case letter.  If WC is not an upper-case letter, WC is
     returned unchanged.

     'towlower' can be implemented using

          towctrans (wc, wctrans ("tolower"))

     This function is declared in 'wctype.h'.

 -- Function: wint_t towupper (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     If WC is a lower-case letter, 'towupper' returns the corresponding
     upper-case letter.  Otherwise WC is returned unchanged.

     'towupper' can be implemented using

          towctrans (wc, wctrans ("toupper"))

     This function is declared in 'wctype.h'.

   The same warnings given in the last section for the use of the wide
character classification functions apply here.  It is not possible to
simply cast a 'char' type value to a 'wint_t' and use it as an argument
to 'towctrans' calls.


File: libc.info,  Node: String and Array Utilities,  Next: Character Set Handling,  Prev: Character Handling,  Up: Top

5 String and Array Utilities
****************************

Operations on strings (or arrays of characters) are an important part of
many programs.  The GNU C Library provides an extensive set of string
utility functions, including functions for copying, concatenating,
comparing, and searching strings.  Many of these functions can also
operate on arbitrary regions of storage; for example, the 'memcpy'
function can be used to copy the contents of any kind of array.

   It's fairly common for beginning C programmers to "reinvent the
wheel" by duplicating this functionality in their own code, but it pays
to become familiar with the library functions and to make use of them,
since this offers benefits in maintenance, efficiency, and portability.

   For instance, you could easily compare one string to another in two
lines of C code, but if you use the built-in 'strcmp' function, you're
less likely to make a mistake.  And, since these library functions are
typically highly optimized, your program may run faster too.

* Menu:

* Representation of Strings::   Introduction to basic concepts.
* String/Array Conventions::    Whether to use a string function or an
				 arbitrary array function.
* String Length::               Determining the length of a string.
* Copying and Concatenation::   Functions to copy the contents of strings
				 and arrays.
* String/Array Comparison::     Functions for byte-wise and character-wise
				 comparison.
* Collation Functions::         Functions for collating strings.
* Search Functions::            Searching for a specific element or substring.
* Finding Tokens in a String::  Splitting a string into tokens by looking
				 for delimiters.
* strfry::                      Function for flash-cooking a string.
* Trivial Encryption::          Obscuring data.
* Encode Binary Data::          Encoding and Decoding of Binary Data.
* Argz and Envz Vectors::       Null-separated string vectors.


File: libc.info,  Node: Representation of Strings,  Next: String/Array Conventions,  Up: String and Array Utilities

5.1 Representation of Strings
=============================

This section is a quick summary of string concepts for beginning C
programmers.  It describes how character strings are represented in C
and some common pitfalls.  If you are already familiar with this
material, you can skip this section.

   A "string" is an array of 'char' objects.  But string-valued
variables are usually declared to be pointers of type 'char *'.  Such
variables do not include space for the text of a string; that has to be
stored somewhere else--in an array variable, a string constant, or
dynamically allocated memory (*note Memory Allocation::).  It's up to
you to store the address of the chosen memory space into the pointer
variable.  Alternatively you can store a "null pointer" in the pointer
variable.  The null pointer does not point anywhere, so attempting to
reference the string it points to gets an error.

   "string" normally refers to multibyte character strings as opposed to
wide character strings.  Wide character strings are arrays of type
'wchar_t' and as for multibyte character strings usually pointers of
type 'wchar_t *' are used.

   By convention, a "null character", ''\0'', marks the end of a
multibyte character string and the "null wide character", 'L'\0'', marks
the end of a wide character string.  For example, in testing to see
whether the 'char *' variable P points to a null character marking the
end of a string, you can write '!*P' or '*P == '\0''.

   A null character is quite different conceptually from a null pointer,
although both are represented by the integer '0'.

   "String literals" appear in C program source as strings of characters
between double-quote characters ('"') where the initial double-quote
character is immediately preceded by a capital 'L' (ell) character (as
in 'L"foo"').  In ISO C, string literals can also be formed by "string
concatenation": '"a" "b"' is the same as '"ab"'.  For wide character
strings one can either use 'L"a" L"b"' or 'L"a" "b"'.  Modification of
string literals is not allowed by the GNU C compiler, because literals
are placed in read-only storage.

   Character arrays that are declared 'const' cannot be modified either.
It's generally good style to declare non-modifiable string pointers to
be of type 'const char *', since this often allows the C compiler to
detect accidental modifications as well as providing some amount of
documentation about what your program intends to do with the string.

   The amount of memory allocated for the character array may extend
past the null character that normally marks the end of the string.  In
this document, the term "allocated size" is always used to refer to the
total amount of memory allocated for the string, while the term "length"
refers to the number of characters up to (but not including) the
terminating null character.

   A notorious source of program bugs is trying to put more characters
in a string than fit in its allocated size.  When writing code that
extends strings or moves characters into a pre-allocated array, you
should be very careful to keep track of the length of the text and make
explicit checks for overflowing the array.  Many of the library
functions _do not_ do this for you!  Remember also that you need to
allocate an extra byte to hold the null character that marks the end of
the string.

   Originally strings were sequences of bytes where each byte represents
a single character.  This is still true today if the strings are encoded
using a single-byte character encoding.  Things are different if the
strings are encoded using a multibyte encoding (for more information on
encodings see *note Extended Char Intro::).  There is no difference in
the programming interface for these two kind of strings; the programmer
has to be aware of this and interpret the byte sequences accordingly.

   But since there is no separate interface taking care of these
differences the byte-based string functions are sometimes hard to use.
Since the count parameters of these functions specify bytes a call to
'strncpy' could cut a multibyte character in the middle and put an
incomplete (and therefore unusable) byte sequence in the target buffer.

   To avoid these problems later versions of the ISO C standard
introduce a second set of functions which are operating on "wide
characters" (*note Extended Char Intro::).  These functions don't have
the problems the single-byte versions have since every wide character is
a legal, interpretable value.  This does not mean that cutting wide
character strings at arbitrary points is without problems.  It normally
is for alphabet-based languages (except for non-normalized text) but
languages based on syllables still have the problem that more than one
wide character is necessary to complete a logical unit.  This is a
higher level problem which the C library functions are not designed to
solve.  But it is at least good that no invalid byte sequences can be
created.  Also, the higher level functions can also much easier operate
on wide character than on multibyte characters so that a general advise
is to use wide characters internally whenever text is more than simply
copied.

   The remaining of this chapter will discuss the functions for handling
wide character strings in parallel with the discussion of the multibyte
character strings since there is almost always an exact equivalent
available.


File: libc.info,  Node: String/Array Conventions,  Next: String Length,  Prev: Representation of Strings,  Up: String and Array Utilities

5.2 String and Array Conventions
================================

This chapter describes both functions that work on arbitrary arrays or
blocks of memory, and functions that are specific to null-terminated
arrays of characters and wide characters.

   Functions that operate on arbitrary blocks of memory have names
beginning with 'mem' and 'wmem' (such as 'memcpy' and 'wmemcpy') and
invariably take an argument which specifies the size (in bytes and wide
characters respectively) of the block of memory to operate on.  The
array arguments and return values for these functions have type 'void *'
or 'wchar_t'.  As a matter of style, the elements of the arrays used
with the 'mem' functions are referred to as "bytes".  You can pass any
kind of pointer to these functions, and the 'sizeof' operator is useful
in computing the value for the size argument.  Parameters to the 'wmem'
functions must be of type 'wchar_t *'.  These functions are not really
usable with anything but arrays of this type.

   In contrast, functions that operate specifically on strings and wide
character strings have names beginning with 'str' and 'wcs' respectively
(such as 'strcpy' and 'wcscpy') and look for a null character to
terminate the string instead of requiring an explicit size argument to
be passed.  (Some of these functions accept a specified maximum length,
but they also check for premature termination with a null character.)
The array arguments and return values for these functions have type
'char *' and 'wchar_t *' respectively, and the array elements are
referred to as "characters" and "wide characters".

   In many cases, there are both 'mem' and 'str'/'wcs' versions of a
function.  The one that is more appropriate to use depends on the exact
situation.  When your program is manipulating arbitrary arrays or blocks
of storage, then you should always use the 'mem' functions.  On the
other hand, when you are manipulating null-terminated strings it is
usually more convenient to use the 'str'/'wcs' functions, unless you
already know the length of the string in advance.  The 'wmem' functions
should be used for wide character arrays with known size.

   Some of the memory and string functions take single characters as
arguments.  Since a value of type 'char' is automatically promoted into
a value of type 'int' when used as a parameter, the functions are
declared with 'int' as the type of the parameter in question.  In case
of the wide character function the situation is similarly: the parameter
type for a single wide character is 'wint_t' and not 'wchar_t'.  This
would for many implementations not be necessary since the 'wchar_t' is
large enough to not be automatically promoted, but since the ISO C
standard does not require such a choice of types the 'wint_t' type is
used.


File: libc.info,  Node: String Length,  Next: Copying and Concatenation,  Prev: String/Array Conventions,  Up: String and Array Utilities

5.3 String Length
=================

You can get the length of a string using the 'strlen' function.  This
function is declared in the header file 'string.h'.

 -- Function: size_t strlen (const char *S)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strlen' function returns the length of the null-terminated
     string S in bytes.  (In other words, it returns the offset of the
     terminating null character within the array.)

     For example,
          strlen ("hello, world")
              => 12

     When applied to a character array, the 'strlen' function returns
     the length of the string stored there, not its allocated size.  You
     can get the allocated size of the character array that holds a
     string using the 'sizeof' operator:

          char string[32] = "hello, world";
          sizeof (string)
              => 32
          strlen (string)
              => 12

     But beware, this will not work unless STRING is the character array
     itself, not a pointer to it.  For example:

          char string[32] = "hello, world";
          char *ptr = string;
          sizeof (string)
              => 32
          sizeof (ptr)
              => 4  /* (on a machine with 4 byte pointers) */

     This is an easy mistake to make when you are working with functions
     that take string arguments; those arguments are always pointers,
     not arrays.

     It must also be noted that for multibyte encoded strings the return
     value does not have to correspond to the number of characters in
     the string.  To get this value the string can be converted to wide
     characters and 'wcslen' can be used or something like the following
     code can be used:

          /* The input is in 'string'.
             The length is expected in 'n'.  */
          {
            mbstate_t t;
            char *scopy = string;
            /* In initial state.  */
            memset (&t, '\0', sizeof (t));
            /* Determine number of characters.  */
            n = mbsrtowcs (NULL, &scopy, strlen (scopy), &t);
          }

     This is cumbersome to do so if the number of characters (as opposed
     to bytes) is needed often it is better to work with wide
     characters.

   The wide character equivalent is declared in 'wchar.h'.

 -- Function: size_t wcslen (const wchar_t *WS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wcslen' function is the wide character equivalent to 'strlen'.
     The return value is the number of wide characters in the wide
     character string pointed to by WS (this is also the offset of the
     terminating null wide character of WS).

     Since there are no multi wide character sequences making up one
     character the return value is not only the offset in the array, it
     is also the number of wide characters.

     This function was introduced in Amendment 1 to ISO C90.

 -- Function: size_t strnlen (const char *S, size_t MAXLEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strnlen' function returns the length of the string S in bytes
     if this length is smaller than MAXLEN bytes.  Otherwise it returns
     MAXLEN.  Therefore this function is equivalent to '(strlen (S) <
     MAXLEN ? strlen (S) : MAXLEN)' but it is more efficient and works
     even if the string S is not null-terminated.

          char string[32] = "hello, world";
          strnlen (string, 32)
              => 12
          strnlen (string, 5)
              => 5

     This function is a GNU extension and is declared in 'string.h'.

 -- Function: size_t wcsnlen (const wchar_t *WS, size_t MAXLEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'wcsnlen' is the wide character equivalent to 'strnlen'.  The
     MAXLEN parameter specifies the maximum number of wide characters.

     This function is a GNU extension and is declared in 'wchar.h'.


File: libc.info,  Node: Copying and Concatenation,  Next: String/Array Comparison,  Prev: String Length,  Up: String and Array Utilities

5.4 Copying and Concatenation
=============================

You can use the functions described in this section to copy the contents
of strings and arrays, or to append the contents of one string to
another.  The 'str' and 'mem' functions are declared in the header file
'string.h' while the 'wstr' and 'wmem' functions are declared in the
file 'wchar.h'.

   A helpful way to remember the ordering of the arguments to the
functions in this section is that it corresponds to an assignment
expression, with the destination array specified to the left of the
source array.  All of these functions return the address of the
destination array.

   Most of these functions do not work properly if the source and
destination arrays overlap.  For example, if the beginning of the
destination array overlaps the end of the source array, the original
contents of that part of the source array may get overwritten before it
is copied.  Even worse, in the case of the string functions, the null
character marking the end of the string may be lost, and the copy
function might get stuck in a loop trashing all the memory allocated to
your program.

   All functions that have problems copying between overlapping arrays
are explicitly identified in this manual.  In addition to functions in
this section, there are a few others like 'sprintf' (*note Formatted
Output Functions::) and 'scanf' (*note Formatted Input Functions::).

 -- Function: void * memcpy (void *restrict TO, const void *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'memcpy' function copies SIZE bytes from the object beginning
     at FROM into the object beginning at TO.  The behavior of this
     function is undefined if the two arrays TO and FROM overlap; use
     'memmove' instead if overlapping is possible.

     The value returned by 'memcpy' is the value of TO.

     Here is an example of how you might use 'memcpy' to copy the
     contents of an array:

          struct foo *oldarray, *newarray;
          int arraysize;
          ...
          memcpy (new, old, arraysize * sizeof (struct foo));

 -- Function: wchar_t * wmemcpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wmemcpy' function copies SIZE wide characters from the object
     beginning at WFROM into the object beginning at WTO.  The behavior
     of this function is undefined if the two arrays WTO and WFROM
     overlap; use 'wmemmove' instead if overlapping is possible.

     The following is a possible implementation of 'wmemcpy' but there
     are more optimizations possible.

          wchar_t *
          wmemcpy (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                   size_t size)
          {
            return (wchar_t *) memcpy (wto, wfrom, size * sizeof (wchar_t));
          }

     The value returned by 'wmemcpy' is the value of WTO.

     This function was introduced in Amendment 1 to ISO C90.

 -- Function: void * mempcpy (void *restrict TO, const void *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'mempcpy' function is nearly identical to the 'memcpy'
     function.  It copies SIZE bytes from the object beginning at 'from'
     into the object pointed to by TO.  But instead of returning the
     value of TO it returns a pointer to the byte following the last
     written byte in the object beginning at TO.  I.e., the value is
     '((void *) ((char *) TO + SIZE))'.

     This function is useful in situations where a number of objects
     shall be copied to consecutive memory positions.

          void *
          combine (void *o1, size_t s1, void *o2, size_t s2)
          {
            void *result = malloc (s1 + s2);
            if (result != NULL)
              mempcpy (mempcpy (result, o1, s1), o2, s2);
            return result;
          }

     This function is a GNU extension.

 -- Function: wchar_t * wmempcpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wmempcpy' function is nearly identical to the 'wmemcpy'
     function.  It copies SIZE wide characters from the object beginning
     at 'wfrom' into the object pointed to by WTO.  But instead of
     returning the value of WTO it returns a pointer to the wide
     character following the last written wide character in the object
     beginning at WTO.  I.e., the value is 'WTO + SIZE'.

     This function is useful in situations where a number of objects
     shall be copied to consecutive memory positions.

     The following is a possible implementation of 'wmemcpy' but there
     are more optimizations possible.

          wchar_t *
          wmempcpy (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                    size_t size)
          {
            return (wchar_t *) mempcpy (wto, wfrom, size * sizeof (wchar_t));
          }

     This function is a GNU extension.

 -- Function: void * memmove (void *TO, const void *FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'memmove' copies the SIZE bytes at FROM into the SIZE bytes at TO,
     even if those two blocks of space overlap.  In the case of overlap,
     'memmove' is careful to copy the original values of the bytes in
     the block at FROM, including those bytes which also belong to the
     block at TO.

     The value returned by 'memmove' is the value of TO.

 -- Function: wchar_t * wmemmove (wchar_t *WTO, const wchar_t *WFROM,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'wmemmove' copies the SIZE wide characters at WFROM into the SIZE
     wide characters at WTO, even if those two blocks of space overlap.
     In the case of overlap, 'memmove' is careful to copy the original
     values of the wide characters in the block at WFROM, including
     those wide characters which also belong to the block at WTO.

     The following is a possible implementation of 'wmemcpy' but there
     are more optimizations possible.

          wchar_t *
          wmempcpy (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                    size_t size)
          {
            return (wchar_t *) mempcpy (wto, wfrom, size * sizeof (wchar_t));
          }

     The value returned by 'wmemmove' is the value of WTO.

     This function is a GNU extension.

 -- Function: void * memccpy (void *restrict TO, const void *restrict
          FROM, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies no more than SIZE bytes from FROM to TO,
     stopping if a byte matching C is found.  The return value is a
     pointer into TO one byte past where C was copied, or a null pointer
     if no byte matching C appeared in the first SIZE bytes of FROM.

 -- Function: void * memset (void *BLOCK, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies the value of C (converted to an 'unsigned
     char') into each of the first SIZE bytes of the object beginning at
     BLOCK.  It returns the value of BLOCK.

 -- Function: wchar_t * wmemset (wchar_t *BLOCK, wchar_t WC, size_t
          SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies the value of WC into each of the first SIZE
     wide characters of the object beginning at BLOCK.  It returns the
     value of BLOCK.

 -- Function: char * strcpy (char *restrict TO, const char *restrict
          FROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This copies characters from the string FROM (up to and including
     the terminating null character) into the string TO.  Like 'memcpy',
     this function has undefined results if the strings overlap.  The
     return value is the value of TO.

 -- Function: wchar_t * wcscpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This copies wide characters from the string WFROM (up to and
     including the terminating null wide character) into the string WTO.
     Like 'wmemcpy', this function has undefined results if the strings
     overlap.  The return value is the value of WTO.

 -- Function: char * strncpy (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to 'strcpy' but always copies exactly SIZE
     characters into TO.

     If the length of FROM is more than SIZE, then 'strncpy' copies just
     the first SIZE characters.  Note that in this case there is no null
     terminator written into TO.

     If the length of FROM is less than SIZE, then 'strncpy' copies all
     of FROM, followed by enough null characters to add up to SIZE
     characters in all.  This behavior is rarely useful, but it is
     specified by the ISO C standard.

     The behavior of 'strncpy' is undefined if the strings overlap.

     Using 'strncpy' as opposed to 'strcpy' is a way to avoid bugs
     relating to writing past the end of the allocated space for TO.
     However, it can also make your program much slower in one common
     case: copying a string which is probably small into a potentially
     large buffer.  In this case, SIZE may be large, and when it is,
     'strncpy' will waste a considerable amount of time copying null
     characters.

 -- Function: wchar_t * wcsncpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to 'wcscpy' but always copies exactly SIZE
     wide characters into WTO.

     If the length of WFROM is more than SIZE, then 'wcsncpy' copies
     just the first SIZE wide characters.  Note that in this case there
     is no null terminator written into WTO.

     If the length of WFROM is less than SIZE, then 'wcsncpy' copies all
     of WFROM, followed by enough null wide characters to add up to SIZE
     wide characters in all.  This behavior is rarely useful, but it is
     specified by the ISO C standard.

     The behavior of 'wcsncpy' is undefined if the strings overlap.

     Using 'wcsncpy' as opposed to 'wcscpy' is a way to avoid bugs
     relating to writing past the end of the allocated space for WTO.
     However, it can also make your program much slower in one common
     case: copying a string which is probably small into a potentially
     large buffer.  In this case, SIZE may be large, and when it is,
     'wcsncpy' will waste a considerable amount of time copying null
     wide characters.

 -- Function: char * strdup (const char *S)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     This function copies the null-terminated string S into a newly
     allocated string.  The string is allocated using 'malloc'; see
     *note Unconstrained Allocation::.  If 'malloc' cannot allocate
     space for the new string, 'strdup' returns a null pointer.
     Otherwise it returns a pointer to the new string.

 -- Function: wchar_t * wcsdup (const wchar_t *WS)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     This function copies the null-terminated wide character string WS
     into a newly allocated string.  The string is allocated using
     'malloc'; see *note Unconstrained Allocation::.  If 'malloc' cannot
     allocate space for the new string, 'wcsdup' returns a null pointer.
     Otherwise it returns a pointer to the new wide character string.

     This function is a GNU extension.

 -- Function: char * strndup (const char *S, size_t SIZE)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     This function is similar to 'strdup' but always copies at most SIZE
     characters into the newly allocated string.

     If the length of S is more than SIZE, then 'strndup' copies just
     the first SIZE characters and adds a closing null terminator.
     Otherwise all characters are copied and the string is terminated.

     This function is different to 'strncpy' in that it always
     terminates the destination string.

     'strndup' is a GNU extension.

 -- Function: char * stpcpy (char *restrict TO, const char *restrict
          FROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like 'strcpy', except that it returns a pointer to
     the end of the string TO (that is, the address of the terminating
     null character 'to + strlen (from)') rather than the beginning.

     For example, this program uses 'stpcpy' to concatenate 'foo' and
     'bar' to produce 'foobar', which it then prints.


          #include <string.h>
          #include <stdio.h>

          int
          main (void)
          {
            char buffer[10];
            char *to = buffer;
            to = stpcpy (to, "foo");
            to = stpcpy (to, "bar");
            puts (buffer);
            return 0;
          }

     This function is not part of the ISO or POSIX standards, and is not
     customary on Unix systems, but we did not invent it either.
     Perhaps it comes from MS-DOG.

     Its behavior is undefined if the strings overlap.  The function is
     declared in 'string.h'.

 -- Function: wchar_t * wcpcpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like 'wcscpy', except that it returns a pointer to
     the end of the string WTO (that is, the address of the terminating
     null character 'wto + strlen (wfrom)') rather than the beginning.

     This function is not part of ISO or POSIX but was found useful
     while developing the GNU C Library itself.

     The behavior of 'wcpcpy' is undefined if the strings overlap.

     'wcpcpy' is a GNU extension and is declared in 'wchar.h'.

 -- Function: char * stpncpy (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to 'stpcpy' but copies always exactly SIZE
     characters into TO.

     If the length of FROM is more than SIZE, then 'stpncpy' copies just
     the first SIZE characters and returns a pointer to the character
     directly following the one which was copied last.  Note that in
     this case there is no null terminator written into TO.

     If the length of FROM is less than SIZE, then 'stpncpy' copies all
     of FROM, followed by enough null characters to add up to SIZE
     characters in all.  This behavior is rarely useful, but it is
     implemented to be useful in contexts where this behavior of the
     'strncpy' is used.  'stpncpy' returns a pointer to the _first_
     written null character.

     This function is not part of ISO or POSIX but was found useful
     while developing the GNU C Library itself.

     Its behavior is undefined if the strings overlap.  The function is
     declared in 'string.h'.

 -- Function: wchar_t * wcpncpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to 'wcpcpy' but copies always exactly
     WSIZE characters into WTO.

     If the length of WFROM is more than SIZE, then 'wcpncpy' copies
     just the first SIZE wide characters and returns a pointer to the
     wide character directly following the last non-null wide character
     which was copied last.  Note that in this case there is no null
     terminator written into WTO.

     If the length of WFROM is less than SIZE, then 'wcpncpy' copies all
     of WFROM, followed by enough null characters to add up to SIZE
     characters in all.  This behavior is rarely useful, but it is
     implemented to be useful in contexts where this behavior of the
     'wcsncpy' is used.  'wcpncpy' returns a pointer to the _first_
     written null character.

     This function is not part of ISO or POSIX but was found useful
     while developing the GNU C Library itself.

     Its behavior is undefined if the strings overlap.

     'wcpncpy' is a GNU extension and is declared in 'wchar.h'.

 -- Macro: char * strdupa (const char *S)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This macro is similar to 'strdup' but allocates the new string
     using 'alloca' instead of 'malloc' (*note Variable Size
     Automatic::).  This means of course the returned string has the
     same limitations as any block of memory allocated using 'alloca'.

     For obvious reasons 'strdupa' is implemented only as a macro; you
     cannot get the address of this function.  Despite this limitation
     it is a useful function.  The following code shows a situation
     where using 'malloc' would be a lot more expensive.


          #include <paths.h>
          #include <string.h>
          #include <stdio.h>

          const char path[] = _PATH_STDPATH;

          int
          main (void)
          {
            char *wr_path = strdupa (path);
            char *cp = strtok (wr_path, ":");

            while (cp != NULL)
              {
                puts (cp);
                cp = strtok (NULL, ":");
              }
            return 0;
          }

     Please note that calling 'strtok' using PATH directly is invalid.
     It is also not allowed to call 'strdupa' in the argument list of
     'strtok' since 'strdupa' uses 'alloca' (*note Variable Size
     Automatic::) can interfere with the parameter passing.

     This function is only available if GNU CC is used.

 -- Macro: char * strndupa (const char *S, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to 'strndup' but like 'strdupa' it
     allocates the new string using 'alloca' *note Variable Size
     Automatic::.  The same advantages and limitations of 'strdupa' are
     valid for 'strndupa', too.

     This function is implemented only as a macro, just like 'strdupa'.
     Just as 'strdupa' this macro also must not be used inside the
     parameter list in a function call.

     'strndupa' is only available if GNU CC is used.

 -- Function: char * strcat (char *restrict TO, const char *restrict
          FROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strcat' function is similar to 'strcpy', except that the
     characters from FROM are concatenated or appended to the end of TO,
     instead of overwriting it.  That is, the first character from FROM
     overwrites the null character marking the end of TO.

     An equivalent definition for 'strcat' would be:

          char *
          strcat (char *restrict to, const char *restrict from)
          {
            strcpy (to + strlen (to), from);
            return to;
          }

     This function has undefined results if the strings overlap.

 -- Function: wchar_t * wcscat (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wcscat' function is similar to 'wcscpy', except that the
     characters from WFROM are concatenated or appended to the end of
     WTO, instead of overwriting it.  That is, the first character from
     WFROM overwrites the null character marking the end of WTO.

     An equivalent definition for 'wcscat' would be:

          wchar_t *
          wcscat (wchar_t *wto, const wchar_t *wfrom)
          {
            wcscpy (wto + wcslen (wto), wfrom);
            return wto;
          }

     This function has undefined results if the strings overlap.

   Programmers using the 'strcat' or 'wcscat' function (or the following
'strncat' or 'wcsncar' functions for that matter) can easily be
recognized as lazy and reckless.  In almost all situations the lengths
of the participating strings are known (it better should be since how
can one otherwise ensure the allocated size of the buffer is
sufficient?)  Or at least, one could know them if one keeps track of the
results of the various function calls.  But then it is very inefficient
to use 'strcat'/'wcscat'.  A lot of time is wasted finding the end of
the destination string so that the actual copying can start.  This is a
common example:

     /* This function concatenates arbitrarily many strings.  The last
        parameter must be 'NULL'.  */
     char *
     concat (const char *str, ...)
     {
       va_list ap, ap2;
       size_t total = 1;
       const char *s;
       char *result;

       va_start (ap, str);
       va_copy (ap2, ap);

       /* Determine how much space we need.  */
       for (s = str; s != NULL; s = va_arg (ap, const char *))
         total += strlen (s);

       va_end (ap);

       result = (char *) malloc (total);
       if (result != NULL)
         {
           result[0] = '\0';

           /* Copy the strings.  */
           for (s = str; s != NULL; s = va_arg (ap2, const char *))
             strcat (result, s);
         }

       va_end (ap2);

       return result;
     }

   This looks quite simple, especially the second loop where the strings
are actually copied.  But these innocent lines hide a major performance
penalty.  Just imagine that ten strings of 100 bytes each have to be
concatenated.  For the second string we search the already stored 100
bytes for the end of the string so that we can append the next string.
For all strings in total the comparisons necessary to find the end of
the intermediate results sums up to 5500!  If we combine the copying
with the search for the allocation we can write this function more
efficient:

     char *
     concat (const char *str, ...)
     {
       va_list ap;
       size_t allocated = 100;
       char *result = (char *) malloc (allocated);

       if (result != NULL)
         {
           char *newp;
           char *wp;
           const char *s;

           va_start (ap, str);

           wp = result;
           for (s = str; s != NULL; s = va_arg (ap, const char *))
             {
               size_t len = strlen (s);

               /* Resize the allocated memory if necessary.  */
               if (wp + len + 1 > result + allocated)
                 {
                   allocated = (allocated + len) * 2;
                   newp = (char *) realloc (result, allocated);
                   if (newp == NULL)
                     {
                       free (result);
                       return NULL;
                     }
                   wp = newp + (wp - result);
                   result = newp;
                 }

               wp = mempcpy (wp, s, len);
             }

           /* Terminate the result string.  */
           *wp++ = '\0';

           /* Resize memory to the optimal size.  */
           newp = realloc (result, wp - result);
           if (newp != NULL)
             result = newp;

           va_end (ap);
         }

       return result;
     }

   With a bit more knowledge about the input strings one could fine-tune
the memory allocation.  The difference we are pointing to here is that
we don't use 'strcat' anymore.  We always keep track of the length of
the current intermediate result so we can safe us the search for the end
of the string and use 'mempcpy'.  Please note that we also don't use
'stpcpy' which might seem more natural since we handle with strings.
But this is not necessary since we already know the length of the string
and therefore can use the faster memory copying function.  The example
would work for wide characters the same way.

   Whenever a programmer feels the need to use 'strcat' she or he should
think twice and look through the program whether the code cannot be
rewritten to take advantage of already calculated results.  Again: it is
almost always unnecessary to use 'strcat'.

 -- Function: char * strncat (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like 'strcat' except that not more than SIZE
     characters from FROM are appended to the end of TO.  A single null
     character is also always appended to TO, so the total allocated
     size of TO must be at least 'SIZE + 1' bytes longer than its
     initial length.

     The 'strncat' function could be implemented like this:

          char *
          strncat (char *to, const char *from, size_t size)
          {
            memcpy (to + strlen (to), from, strnlen (from, size));
            to[strlen (to) + strnlen (from, size)] = '\0';
            return to;
          }

     The behavior of 'strncat' is undefined if the strings overlap.

 -- Function: wchar_t * wcsncat (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like 'wcscat' except that not more than SIZE
     characters from FROM are appended to the end of TO.  A single null
     character is also always appended to TO, so the total allocated
     size of TO must be at least 'SIZE + 1' bytes longer than its
     initial length.

     The 'wcsncat' function could be implemented like this:

          wchar_t *
          wcsncat (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                   size_t size)
          {
            memcpy (wto + wcslen (wto), wfrom, wcsnlen (wfrom, size) * sizeof (wchar_t));
            wto[wcslen (to) + wcsnlen (wfrom, size)] = '\0';
            return wto;
          }

     The behavior of 'wcsncat' is undefined if the strings overlap.

   Here is an example showing the use of 'strncpy' and 'strncat' (the
wide character version is equivalent).  Notice how, in the call to
'strncat', the SIZE parameter is computed to avoid overflowing the
character array 'buffer'.


     #include <string.h>
     #include <stdio.h>

     #define SIZE 10

     static char buffer[SIZE];

     int
     main (void)
     {
       strncpy (buffer, "hello", SIZE);
       puts (buffer);
       strncat (buffer, ", world", SIZE - strlen (buffer) - 1);
       puts (buffer);
     }

The output produced by this program looks like:

     hello
     hello, wo

 -- Function: void bcopy (const void *FROM, void *TO, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is a partially obsolete alternative for 'memmove', derived
     from BSD. Note that it is not quite equivalent to 'memmove',
     because the arguments are not in the same order and there is no
     return value.

 -- Function: void bzero (void *BLOCK, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is a partially obsolete alternative for 'memset', derived from
     BSD. Note that it is not as general as 'memset', because the only
     value it can store is zero.


File: libc.info,  Node: String/Array Comparison,  Next: Collation Functions,  Prev: Copying and Concatenation,  Up: String and Array Utilities

5.5 String/Array Comparison
===========================

You can use the functions in this section to perform comparisons on the
contents of strings and arrays.  As well as checking for equality, these
functions can also be used as the ordering functions for sorting
operations.  *Note Searching and Sorting::, for an example of this.

   Unlike most comparison operations in C, the string comparison
functions return a nonzero value if the strings are _not_ equivalent
rather than if they are.  The sign of the value indicates the relative
ordering of the first characters in the strings that are not equivalent:
a negative value indicates that the first string is "less" than the
second, while a positive value indicates that the first string is
"greater".

   The most common use of these functions is to check only for equality.
This is canonically done with an expression like '! strcmp (s1, s2)'.

   All of these functions are declared in the header file 'string.h'.

 -- Function: int memcmp (const void *A1, const void *A2, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function 'memcmp' compares the SIZE bytes of memory beginning
     at A1 against the SIZE bytes of memory beginning at A2.  The value
     returned has the same sign as the difference between the first
     differing pair of bytes (interpreted as 'unsigned char' objects,
     then promoted to 'int').

     If the contents of the two blocks are equal, 'memcmp' returns '0'.

 -- Function: int wmemcmp (const wchar_t *A1, const wchar_t *A2, size_t
          SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function 'wmemcmp' compares the SIZE wide characters beginning
     at A1 against the SIZE wide characters beginning at A2.  The value
     returned is smaller than or larger than zero depending on whether
     the first differing wide character is A1 is smaller or larger than
     the corresponding character in A2.

     If the contents of the two blocks are equal, 'wmemcmp' returns '0'.

   On arbitrary arrays, the 'memcmp' function is mostly useful for
testing equality.  It usually isn't meaningful to do byte-wise ordering
comparisons on arrays of things other than bytes.  For example, a
byte-wise comparison on the bytes that make up floating-point numbers
isn't likely to tell you anything about the relationship between the
values of the floating-point numbers.

   'wmemcmp' is really only useful to compare arrays of type 'wchar_t'
since the function looks at 'sizeof (wchar_t)' bytes at a time and this
number of bytes is system dependent.

   You should also be careful about using 'memcmp' to compare objects
that can contain "holes", such as the padding inserted into structure
objects to enforce alignment requirements, extra space at the end of
unions, and extra characters at the ends of strings whose length is less
than their allocated size.  The contents of these "holes" are
indeterminate and may cause strange behavior when performing byte-wise
comparisons.  For more predictable results, perform an explicit
component-wise comparison.

   For example, given a structure type definition like:

     struct foo
       {
         unsigned char tag;
         union
           {
             double f;
             long i;
             char *p;
           } value;
       };

you are better off writing a specialized comparison function to compare
'struct foo' objects instead of comparing them with 'memcmp'.

 -- Function: int strcmp (const char *S1, const char *S2)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strcmp' function compares the string S1 against S2, returning
     a value that has the same sign as the difference between the first
     differing pair of characters (interpreted as 'unsigned char'
     objects, then promoted to 'int').

     If the two strings are equal, 'strcmp' returns '0'.

     A consequence of the ordering used by 'strcmp' is that if S1 is an
     initial substring of S2, then S1 is considered to be "less than"
     S2.

     'strcmp' does not take sorting conventions of the language the
     strings are written in into account.  To get that one has to use
     'strcoll'.

 -- Function: int wcscmp (const wchar_t *WS1, const wchar_t *WS2)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wcscmp' function compares the wide character string WS1
     against WS2.  The value returned is smaller than or larger than
     zero depending on whether the first differing wide character is WS1
     is smaller or larger than the corresponding character in WS2.

     If the two strings are equal, 'wcscmp' returns '0'.

     A consequence of the ordering used by 'wcscmp' is that if WS1 is an
     initial substring of WS2, then WS1 is considered to be "less than"
     WS2.

     'wcscmp' does not take sorting conventions of the language the
     strings are written in into account.  To get that one has to use
     'wcscoll'.

 -- Function: int strcasecmp (const char *S1, const char *S2)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like 'strcmp', except that differences in case are
     ignored.  How uppercase and lowercase characters are related is
     determined by the currently selected locale.  In the standard '"C"'
     locale the characters A" and a" do not match but in a locale which
     regards these characters as parts of the alphabet they do match.

     'strcasecmp' is derived from BSD.

 -- Function: int wcscasecmp (const wchar_t *WS1, const wchar_t *WS2)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like 'wcscmp', except that differences in case are
     ignored.  How uppercase and lowercase characters are related is
     determined by the currently selected locale.  In the standard '"C"'
     locale the characters A" and a" do not match but in a locale which
     regards these characters as parts of the alphabet they do match.

     'wcscasecmp' is a GNU extension.

 -- Function: int strncmp (const char *S1, const char *S2, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is the similar to 'strcmp', except that no more than
     SIZE characters are compared.  In other words, if the two strings
     are the same in their first SIZE characters, the return value is
     zero.

 -- Function: int wcsncmp (const wchar_t *WS1, const wchar_t *WS2,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is the similar to 'wcscmp', except that no more than
     SIZE wide characters are compared.  In other words, if the two
     strings are the same in their first SIZE wide characters, the
     return value is zero.

 -- Function: int strncasecmp (const char *S1, const char *S2, size_t N)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like 'strncmp', except that differences in case
     are ignored.  Like 'strcasecmp', it is locale dependent how
     uppercase and lowercase characters are related.

     'strncasecmp' is a GNU extension.

 -- Function: int wcsncasecmp (const wchar_t *WS1, const wchar_t *S2,
          size_t N)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like 'wcsncmp', except that differences in case
     are ignored.  Like 'wcscasecmp', it is locale dependent how
     uppercase and lowercase characters are related.

     'wcsncasecmp' is a GNU extension.

   Here are some examples showing the use of 'strcmp' and 'strncmp'
(equivalent examples can be constructed for the wide character
functions).  These examples assume the use of the ASCII character set.
(If some other character set--say, EBCDIC--is used instead, then the
glyphs are associated with different numeric codes, and the return
values and ordering may differ.)

     strcmp ("hello", "hello")
         => 0    /* These two strings are the same. */
     strcmp ("hello", "Hello")
         => 32   /* Comparisons are case-sensitive. */
     strcmp ("hello", "world")
         => -15  /* The character ''h'' comes before ''w''. */
     strcmp ("hello", "hello, world")
         => -44  /* Comparing a null character against a comma. */
     strncmp ("hello", "hello, world", 5)
         => 0    /* The initial 5 characters are the same. */
     strncmp ("hello, world", "hello, stupid world!!!", 5)
         => 0    /* The initial 5 characters are the same. */

 -- Function: int strverscmp (const char *S1, const char *S2)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     The 'strverscmp' function compares the string S1 against S2,
     considering them as holding indices/version numbers.  The return
     value follows the same conventions as found in the 'strcmp'
     function.  In fact, if S1 and S2 contain no digits, 'strverscmp'
     behaves like 'strcmp'.

     Basically, we compare strings normally (character by character),
     until we find a digit in each string - then we enter a special
     comparison mode, where each sequence of digits is taken as a whole.
     If we reach the end of these two parts without noticing a
     difference, we return to the standard comparison mode.  There are
     two types of numeric parts: "integral" and "fractional" (those
     begin with a '0').  The types of the numeric parts affect the way
     we sort them:

        * integral/integral: we compare values as you would expect.

        * fractional/integral: the fractional part is less than the
          integral one.  Again, no surprise.

        * fractional/fractional: the things become a bit more complex.
          If the common prefix contains only leading zeroes, the longest
          part is less than the other one; else the comparison behaves
          normally.

          strverscmp ("no digit", "no digit")
              => 0    /* same behavior as strcmp. */
          strverscmp ("item#99", "item#100")
              => <0   /* same prefix, but 99 < 100. */
          strverscmp ("alpha1", "alpha001")
              => >0   /* fractional part inferior to integral one. */
          strverscmp ("part1_f012", "part1_f01")
              => >0   /* two fractional parts. */
          strverscmp ("foo.009", "foo.0")
              => <0   /* idem, but with leading zeroes only. */

     This function is especially useful when dealing with filename
     sorting, because filenames frequently hold indices/version numbers.

     'strverscmp' is a GNU extension.

 -- Function: int bcmp (const void *A1, const void *A2, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is an obsolete alias for 'memcmp', derived from BSD.


File: libc.info,  Node: Collation Functions,  Next: Search Functions,  Prev: String/Array Comparison,  Up: String and Array Utilities

5.6 Collation Functions
=======================

In some locales, the conventions for lexicographic ordering differ from
the strict numeric ordering of character codes.  For example, in Spanish
most glyphs with diacritical marks such as accents are not considered
distinct letters for the purposes of collation.  On the other hand, the
two-character sequence 'll' is treated as a single letter that is
collated immediately after 'l'.

   You can use the functions 'strcoll' and 'strxfrm' (declared in the
headers file 'string.h') and 'wcscoll' and 'wcsxfrm' (declared in the
headers file 'wchar') to compare strings using a collation ordering
appropriate for the current locale.  The locale used by these functions
in particular can be specified by setting the locale for the
'LC_COLLATE' category; see *note Locales::.

   In the standard C locale, the collation sequence for 'strcoll' is the
same as that for 'strcmp'.  Similarly, 'wcscoll' and 'wcscmp' are the
same in this situation.

   Effectively, the way these functions work is by applying a mapping to
transform the characters in a string to a byte sequence that represents
the string's position in the collating sequence of the current locale.
Comparing two such byte sequences in a simple fashion is equivalent to
comparing the strings with the locale's collating sequence.

   The functions 'strcoll' and 'wcscoll' perform this translation
implicitly, in order to do one comparison.  By contrast, 'strxfrm' and
'wcsxfrm' perform the mapping explicitly.  If you are making multiple
comparisons using the same string or set of strings, it is likely to be
more efficient to use 'strxfrm' or 'wcsxfrm' to transform all the
strings just once, and subsequently compare the transformed strings with
'strcmp' or 'wcscmp'.

 -- Function: int strcoll (const char *S1, const char *S2)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The 'strcoll' function is similar to 'strcmp' but uses the
     collating sequence of the current locale for collation (the
     'LC_COLLATE' locale).

 -- Function: int wcscoll (const wchar_t *WS1, const wchar_t *WS2)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The 'wcscoll' function is similar to 'wcscmp' but uses the
     collating sequence of the current locale for collation (the
     'LC_COLLATE' locale).

   Here is an example of sorting an array of strings, using 'strcoll' to
compare them.  The actual sort algorithm is not written here; it comes
from 'qsort' (*note Array Sort Function::).  The job of the code shown
here is to say how to compare the strings while sorting them.  (Later on
in this section, we will show a way to do this more efficiently using
'strxfrm'.)

     /* This is the comparison function used with 'qsort'. */

     int
     compare_elements (const void *v1, const void *v2)
     {
       char * const *p1 = v1;
       char * const *p2 = v2;

       return strcoll (*p1, *p2);
     }

     /* This is the entry point--the function to sort
        strings using the locale's collating sequence. */

     void
     sort_strings (char **array, int nstrings)
     {
       /* Sort 'temp_array' by comparing the strings. */
       qsort (array, nstrings,
              sizeof (char *), compare_elements);
     }

 -- Function: size_t strxfrm (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The function 'strxfrm' transforms the string FROM using the
     collation transformation determined by the locale currently
     selected for collation, and stores the transformed string in the
     array TO.  Up to SIZE characters (including a terminating null
     character) are stored.

     The behavior is undefined if the strings TO and FROM overlap; see
     *note Copying and Concatenation::.

     The return value is the length of the entire transformed string.
     This value is not affected by the value of SIZE, but if it is
     greater or equal than SIZE, it means that the transformed string
     did not entirely fit in the array TO.  In this case, only as much
     of the string as actually fits was stored.  To get the whole
     transformed string, call 'strxfrm' again with a bigger output
     array.

     The transformed string may be longer than the original string, and
     it may also be shorter.

     If SIZE is zero, no characters are stored in TO.  In this case,
     'strxfrm' simply returns the number of characters that would be the
     length of the transformed string.  This is useful for determining
     what size the allocated array should be.  It does not matter what
     TO is if SIZE is zero; TO may even be a null pointer.

 -- Function: size_t wcsxfrm (wchar_t *restrict WTO, const wchar_t
          *WFROM, size_t SIZE)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The function 'wcsxfrm' transforms wide character string WFROM using
     the collation transformation determined by the locale currently
     selected for collation, and stores the transformed string in the
     array WTO.  Up to SIZE wide characters (including a terminating
     null character) are stored.

     The behavior is undefined if the strings WTO and WFROM overlap; see
     *note Copying and Concatenation::.

     The return value is the length of the entire transformed wide
     character string.  This value is not affected by the value of SIZE,
     but if it is greater or equal than SIZE, it means that the
     transformed wide character string did not entirely fit in the array
     WTO.  In this case, only as much of the wide character string as
     actually fits was stored.  To get the whole transformed wide
     character string, call 'wcsxfrm' again with a bigger output array.

     The transformed wide character string may be longer than the
     original wide character string, and it may also be shorter.

     If SIZE is zero, no characters are stored in TO.  In this case,
     'wcsxfrm' simply returns the number of wide characters that would
     be the length of the transformed wide character string.  This is
     useful for determining what size the allocated array should be
     (remember to multiply with 'sizeof (wchar_t)').  It does not matter
     what WTO is if SIZE is zero; WTO may even be a null pointer.

   Here is an example of how you can use 'strxfrm' when you plan to do
many comparisons.  It does the same thing as the previous example, but
much faster, because it has to transform each string only once, no
matter how many times it is compared with other strings.  Even the time
needed to allocate and free storage is much less than the time we save,
when there are many strings.

     struct sorter { char *input; char *transformed; };

     /* This is the comparison function used with 'qsort'
        to sort an array of 'struct sorter'. */

     int
     compare_elements (const void *v1, const void *v2)
     {
       const struct sorter *p1 = v1;
       const struct sorter *p2 = v2;

       return strcmp (p1->transformed, p2->transformed);
     }

     /* This is the entry point--the function to sort
        strings using the locale's collating sequence. */

     void
     sort_strings_fast (char **array, int nstrings)
     {
       struct sorter temp_array[nstrings];
       int i;

       /* Set up 'temp_array'.  Each element contains
          one input string and its transformed string. */
       for (i = 0; i < nstrings; i++)
         {
           size_t length = strlen (array[i]) * 2;
           char *transformed;
           size_t transformed_length;

           temp_array[i].input = array[i];

           /* First try a buffer perhaps big enough.  */
           transformed = (char *) xmalloc (length);

           /* Transform 'array[i]'.  */
           transformed_length = strxfrm (transformed, array[i], length);

           /* If the buffer was not large enough, resize it
              and try again.  */
           if (transformed_length >= length)
             {
               /* Allocate the needed space. +1 for terminating
                  'NUL' character.  */
               transformed = (char *) xrealloc (transformed,
                                                transformed_length + 1);

               /* The return value is not interesting because we know
                  how long the transformed string is.  */
               (void) strxfrm (transformed, array[i],
                               transformed_length + 1);
             }

           temp_array[i].transformed = transformed;
         }

       /* Sort 'temp_array' by comparing transformed strings. */
       qsort (temp_array, sizeof (struct sorter),
              nstrings, compare_elements);

       /* Put the elements back in the permanent array
          in their sorted order. */
       for (i = 0; i < nstrings; i++)
         array[i] = temp_array[i].input;

       /* Free the strings we allocated. */
       for (i = 0; i < nstrings; i++)
         free (temp_array[i].transformed);
     }

   The interesting part of this code for the wide character version
would look like this:

     void
     sort_strings_fast (wchar_t **array, int nstrings)
     {
       ...
           /* Transform 'array[i]'.  */
           transformed_length = wcsxfrm (transformed, array[i], length);

           /* If the buffer was not large enough, resize it
              and try again.  */
           if (transformed_length >= length)
             {
               /* Allocate the needed space. +1 for terminating
                  'NUL' character.  */
               transformed = (wchar_t *) xrealloc (transformed,
                                                   (transformed_length + 1)
                                                   * sizeof (wchar_t));

               /* The return value is not interesting because we know
                  how long the transformed string is.  */
               (void) wcsxfrm (transformed, array[i],
                               transformed_length + 1);
             }
       ...

Note the additional multiplication with 'sizeof (wchar_t)' in the
'realloc' call.

   *Compatibility Note:* The string collation functions are a new
feature of ISO C90.  Older C dialects have no equivalent feature.  The
wide character versions were introduced in Amendment 1 to ISO C90.


File: libc.info,  Node: Search Functions,  Next: Finding Tokens in a String,  Prev: Collation Functions,  Up: String and Array Utilities

5.7 Search Functions
====================

This section describes library functions which perform various kinds of
searching operations on strings and arrays.  These functions are
declared in the header file 'string.h'.

 -- Function: void * memchr (const void *BLOCK, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function finds the first occurrence of the byte C (converted
     to an 'unsigned char') in the initial SIZE bytes of the object
     beginning at BLOCK.  The return value is a pointer to the located
     byte, or a null pointer if no match was found.

 -- Function: wchar_t * wmemchr (const wchar_t *BLOCK, wchar_t WC,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function finds the first occurrence of the wide character WC
     in the initial SIZE wide characters of the object beginning at
     BLOCK.  The return value is a pointer to the located wide
     character, or a null pointer if no match was found.

 -- Function: void * rawmemchr (const void *BLOCK, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Often the 'memchr' function is used with the knowledge that the
     byte C is available in the memory block specified by the
     parameters.  But this means that the SIZE parameter is not really
     needed and that the tests performed with it at runtime (to check
     whether the end of the block is reached) are not needed.

     The 'rawmemchr' function exists for just this situation which is
     surprisingly frequent.  The interface is similar to 'memchr' except
     that the SIZE parameter is missing.  The function will look beyond
     the end of the block pointed to by BLOCK in case the programmer
     made an error in assuming that the byte C is present in the block.
     In this case the result is unspecified.  Otherwise the return value
     is a pointer to the located byte.

     This function is of special interest when looking for the end of a
     string.  Since all strings are terminated by a null byte a call
     like

             rawmemchr (str, '\0')

     will never go beyond the end of the string.

     This function is a GNU extension.

 -- Function: void * memrchr (const void *BLOCK, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function 'memrchr' is like 'memchr', except that it searches
     backwards from the end of the block defined by BLOCK and SIZE
     (instead of forwards from the front).

     This function is a GNU extension.

 -- Function: char * strchr (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strchr' function finds the first occurrence of the character C
     (converted to a 'char') in the null-terminated string beginning at
     STRING.  The return value is a pointer to the located character, or
     a null pointer if no match was found.

     For example,
          strchr ("hello, world", 'l')
              => "llo, world"
          strchr ("hello, world", '?')
              => NULL

     The terminating null character is considered to be part of the
     string, so you can use this function get a pointer to the end of a
     string by specifying a null character as the value of the C
     argument.

     When 'strchr' returns a null pointer, it does not let you know the
     position of the terminating null character it has found.  If you
     need that information, it is better (but less portable) to use
     'strchrnul' than to search for it a second time.

 -- Function: wchar_t * wcschr (const wchar_t *WSTRING, int WC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wcschr' function finds the first occurrence of the wide
     character WC in the null-terminated wide character string beginning
     at WSTRING.  The return value is a pointer to the located wide
     character, or a null pointer if no match was found.

     The terminating null character is considered to be part of the wide
     character string, so you can use this function get a pointer to the
     end of a wide character string by specifying a null wude character
     as the value of the WC argument.  It would be better (but less
     portable) to use 'wcschrnul' in this case, though.

 -- Function: char * strchrnul (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'strchrnul' is the same as 'strchr' except that if it does not find
     the character, it returns a pointer to string's terminating null
     character rather than a null pointer.

     This function is a GNU extension.

 -- Function: wchar_t * wcschrnul (const wchar_t *WSTRING, wchar_t WC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'wcschrnul' is the same as 'wcschr' except that if it does not find
     the wide character, it returns a pointer to wide character string's
     terminating null wide character rather than a null pointer.

     This function is a GNU extension.

   One useful, but unusual, use of the 'strchr' function is when one
wants to have a pointer pointing to the NUL byte terminating a string.
This is often written in this way:

       s += strlen (s);

This is almost optimal but the addition operation duplicated a bit of
the work already done in the 'strlen' function.  A better solution is
this:

       s = strchr (s, '\0');

   There is no restriction on the second parameter of 'strchr' so it
could very well also be the NUL character.  Those readers thinking very
hard about this might now point out that the 'strchr' function is more
expensive than the 'strlen' function since we have two abort criteria.
This is right.  But in the GNU C Library the implementation of 'strchr'
is optimized in a special way so that 'strchr' actually is faster.

 -- Function: char * strrchr (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function 'strrchr' is like 'strchr', except that it searches
     backwards from the end of the string STRING (instead of forwards
     from the front).

     For example,
          strrchr ("hello, world", 'l')
              => "ld"

 -- Function: wchar_t * wcsrchr (const wchar_t *WSTRING, wchar_t C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function 'wcsrchr' is like 'wcschr', except that it searches
     backwards from the end of the string WSTRING (instead of forwards
     from the front).

 -- Function: char * strstr (const char *HAYSTACK, const char *NEEDLE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is like 'strchr', except that it searches HAYSTACK for a
     substring NEEDLE rather than just a single character.  It returns a
     pointer into the string HAYSTACK that is the first character of the
     substring, or a null pointer if no match was found.  If NEEDLE is
     an empty string, the function returns HAYSTACK.

     For example,
          strstr ("hello, world", "l")
              => "llo, world"
          strstr ("hello, world", "wo")
              => "world"

 -- Function: wchar_t * wcsstr (const wchar_t *HAYSTACK, const wchar_t
          *NEEDLE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is like 'wcschr', except that it searches HAYSTACK for a
     substring NEEDLE rather than just a single wide character.  It
     returns a pointer into the string HAYSTACK that is the first wide
     character of the substring, or a null pointer if no match was
     found.  If NEEDLE is an empty string, the function returns
     HAYSTACK.

 -- Function: wchar_t * wcswcs (const wchar_t *HAYSTACK, const wchar_t
          *NEEDLE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'wcswcs' is a deprecated alias for 'wcsstr'.  This is the name
     originally used in the X/Open Portability Guide before the Amendment 1
     to ISO C90 was published.

 -- Function: char * strcasestr (const char *HAYSTACK, const char
          *NEEDLE)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This is like 'strstr', except that it ignores case in searching for
     the substring.  Like 'strcasecmp', it is locale dependent how
     uppercase and lowercase characters are related.

     For example,
          strcasestr ("hello, world", "L")
              => "llo, world"
          strcasestr ("hello, World", "wo")
              => "World"

 -- Function: void * memmem (const void *HAYSTACK, size_t HAYSTACK-LEN,
          const void *NEEDLE, size_t NEEDLE-LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is like 'strstr', but NEEDLE and HAYSTACK are byte arrays
     rather than null-terminated strings.  NEEDLE-LEN is the length of
     NEEDLE and HAYSTACK-LEN is the length of HAYSTACK.

     This function is a GNU extension.

 -- Function: size_t strspn (const char *STRING, const char *SKIPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strspn' ("string span") function returns the length of the
     initial substring of STRING that consists entirely of characters
     that are members of the set specified by the string SKIPSET.  The
     order of the characters in SKIPSET is not important.

     For example,
          strspn ("hello, world", "abcdefghijklmnopqrstuvwxyz")
              => 5

     Note that "character" is here used in the sense of byte.  In a
     string using a multibyte character encoding (abstract) character
     consisting of more than one byte are not treated as an entity.
     Each byte is treated separately.  The function is not
     locale-dependent.

 -- Function: size_t wcsspn (const wchar_t *WSTRING, const wchar_t
          *SKIPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wcsspn' ("wide character string span") function returns the
     length of the initial substring of WSTRING that consists entirely
     of wide characters that are members of the set specified by the
     string SKIPSET.  The order of the wide characters in SKIPSET is not
     important.

 -- Function: size_t strcspn (const char *STRING, const char *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strcspn' ("string complement span") function returns the
     length of the initial substring of STRING that consists entirely of
     characters that are _not_ members of the set specified by the
     string STOPSET.  (In other words, it returns the offset of the
     first character in STRING that is a member of the set STOPSET.)

     For example,
          strcspn ("hello, world", " \t\n,.;!?")
              => 5

     Note that "character" is here used in the sense of byte.  In a
     string using a multibyte character encoding (abstract) character
     consisting of more than one byte are not treated as an entity.
     Each byte is treated separately.  The function is not
     locale-dependent.

 -- Function: size_t wcscspn (const wchar_t *WSTRING, const wchar_t
          *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wcscspn' ("wide character string complement span") function
     returns the length of the initial substring of WSTRING that
     consists entirely of wide characters that are _not_ members of the
     set specified by the string STOPSET.  (In other words, it returns
     the offset of the first character in STRING that is a member of the
     set STOPSET.)

 -- Function: char * strpbrk (const char *STRING, const char *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'strpbrk' ("string pointer break") function is related to
     'strcspn', except that it returns a pointer to the first character
     in STRING that is a member of the set STOPSET instead of the length
     of the initial substring.  It returns a null pointer if no such
     character from STOPSET is found.

     For example,

          strpbrk ("hello, world", " \t\n,.;!?")
              => ", world"

     Note that "character" is here used in the sense of byte.  In a
     string using a multibyte character encoding (abstract) character
     consisting of more than one byte are not treated as an entity.
     Each byte is treated separately.  The function is not
     locale-dependent.

 -- Function: wchar_t * wcspbrk (const wchar_t *WSTRING, const wchar_t
          *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'wcspbrk' ("wide character string pointer break") function is
     related to 'wcscspn', except that it returns a pointer to the first
     wide character in WSTRING that is a member of the set STOPSET
     instead of the length of the initial substring.  It returns a null
     pointer if no such character from STOPSET is found.

5.7.1 Compatibility String Search Functions
-------------------------------------------

 -- Function: char * index (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'index' is another name for 'strchr'; they are exactly the same.
     New code should always use 'strchr' since this name is defined in ISO C
     while 'index' is a BSD invention which never was available on System V
     derived systems.

 -- Function: char * rindex (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'rindex' is another name for 'strrchr'; they are exactly the same.
     New code should always use 'strrchr' since this name is defined in ISO C
     while 'rindex' is a BSD invention which never was available on System V
     derived systems.


File: libc.info,  Node: Finding Tokens in a String,  Next: strfry,  Prev: Search Functions,  Up: String and Array Utilities

5.8 Finding Tokens in a String
==============================

It's fairly common for programs to have a need to do some simple kinds
of lexical analysis and parsing, such as splitting a command string up
into tokens.  You can do this with the 'strtok' function, declared in
the header file 'string.h'.

 -- Function: char * strtok (char *restrict NEWSTRING, const char
          *restrict DELIMITERS)
     Preliminary: | MT-Unsafe race:strtok | AS-Unsafe | AC-Safe | *Note
     POSIX Safety Concepts::.

     A string can be split into tokens by making a series of calls to
     the function 'strtok'.

     The string to be split up is passed as the NEWSTRING argument on
     the first call only.  The 'strtok' function uses this to set up
     some internal state information.  Subsequent calls to get
     additional tokens from the same string are indicated by passing a
     null pointer as the NEWSTRING argument.  Calling 'strtok' with
     another non-null NEWSTRING argument reinitializes the state
     information.  It is guaranteed that no other library function ever
     calls 'strtok' behind your back (which would mess up this internal
     state information).

     The DELIMITERS argument is a string that specifies a set of
     delimiters that may surround the token being extracted.  All the
     initial characters that are members of this set are discarded.  The
     first character that is _not_ a member of this set of delimiters
     marks the beginning of the next token.  The end of the token is
     found by looking for the next character that is a member of the
     delimiter set.  This character in the original string NEWSTRING is
     overwritten by a null character, and the pointer to the beginning
     of the token in NEWSTRING is returned.

     On the next call to 'strtok', the searching begins at the next
     character beyond the one that marked the end of the previous token.
     Note that the set of delimiters DELIMITERS do not have to be the
     same on every call in a series of calls to 'strtok'.

     If the end of the string NEWSTRING is reached, or if the remainder
     of string consists only of delimiter characters, 'strtok' returns a
     null pointer.

     Note that "character" is here used in the sense of byte.  In a
     string using a multibyte character encoding (abstract) character
     consisting of more than one byte are not treated as an entity.
     Each byte is treated separately.  The function is not
     locale-dependent.

 -- Function: wchar_t * wcstok (wchar_t *NEWSTRING, const wchar_t
          *DELIMITERS, wchar_t **SAVE_PTR)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     A string can be split into tokens by making a series of calls to
     the function 'wcstok'.

     The string to be split up is passed as the NEWSTRING argument on
     the first call only.  The 'wcstok' function uses this to set up
     some internal state information.  Subsequent calls to get
     additional tokens from the same wide character string are indicated
     by passing a null pointer as the NEWSTRING argument, which causes
     the pointer previously stored in SAVE_PTR to be used instead.

     The DELIMITERS argument is a wide character string that specifies a
     set of delimiters that may surround the token being extracted.  All
     the initial wide characters that are members of this set are
     discarded.  The first wide character that is _not_ a member of this
     set of delimiters marks the beginning of the next token.  The end
     of the token is found by looking for the next wide character that
     is a member of the delimiter set.  This wide character in the
     original wide character string NEWSTRING is overwritten by a null
     wide character, the pointer past the overwritten wide character is
     saved in SAVE_PTR, and the pointer to the beginning of the token in
     NEWSTRING is returned.

     On the next call to 'wcstok', the searching begins at the next wide
     character beyond the one that marked the end of the previous token.
     Note that the set of delimiters DELIMITERS do not have to be the
     same on every call in a series of calls to 'wcstok'.

     If the end of the wide character string NEWSTRING is reached, or if
     the remainder of string consists only of delimiter wide characters,
     'wcstok' returns a null pointer.

   *Warning:* Since 'strtok' and 'wcstok' alter the string they is
parsing, you should always copy the string to a temporary buffer before
parsing it with 'strtok'/'wcstok' (*note Copying and Concatenation::).
If you allow 'strtok' or 'wcstok' to modify a string that came from
another part of your program, you are asking for trouble; that string
might be used for other purposes after 'strtok' or 'wcstok' has modified
it, and it would not have the expected value.

   The string that you are operating on might even be a constant.  Then
when 'strtok' or 'wcstok' tries to modify it, your program will get a
fatal signal for writing in read-only memory.  *Note Program Error
Signals::.  Even if the operation of 'strtok' or 'wcstok' would not
require a modification of the string (e.g., if there is exactly one
token) the string can (and in the GNU C Library case will) be modified.

   This is a special case of a general principle: if a part of a program
does not have as its purpose the modification of a certain data
structure, then it is error-prone to modify the data structure
temporarily.

   The function 'strtok' is not reentrant, whereas 'wcstok' is.  *Note
Nonreentrancy::, for a discussion of where and why reentrancy is
important.

   Here is a simple example showing the use of 'strtok'.

     #include <string.h>
     #include <stddef.h>

     ...

     const char string[] = "words separated by spaces -- and, punctuation!";
     const char delimiters[] = " .,;:!-";
     char *token, *cp;

     ...

     cp = strdupa (string);                /* Make writable copy.  */
     token = strtok (cp, delimiters);      /* token => "words" */
     token = strtok (NULL, delimiters);    /* token => "separated" */
     token = strtok (NULL, delimiters);    /* token => "by" */
     token = strtok (NULL, delimiters);    /* token => "spaces" */
     token = strtok (NULL, delimiters);    /* token => "and" */
     token = strtok (NULL, delimiters);    /* token => "punctuation" */
     token = strtok (NULL, delimiters);    /* token => NULL */

   The GNU C Library contains two more functions for tokenizing a string
which overcome the limitation of non-reentrancy.  They are only
available for multibyte character strings.

 -- Function: char * strtok_r (char *NEWSTRING, const char *DELIMITERS,
          char **SAVE_PTR)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Just like 'strtok', this function splits the string into several
     tokens which can be accessed by successive calls to 'strtok_r'.
     The difference is that, as in 'wcstok', the information about the
     next token is stored in the space pointed to by the third argument,
     SAVE_PTR, which is a pointer to a string pointer.  Calling
     'strtok_r' with a null pointer for NEWSTRING and leaving SAVE_PTR
     between the calls unchanged does the job without hindering
     reentrancy.

     This function is defined in POSIX.1 and can be found on many
     systems which support multi-threading.

 -- Function: char * strsep (char **STRING_PTR, const char *DELIMITER)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function has a similar functionality as 'strtok_r' with the
     NEWSTRING argument replaced by the SAVE_PTR argument.  The
     initialization of the moving pointer has to be done by the user.
     Successive calls to 'strsep' move the pointer along the tokens
     separated by DELIMITER, returning the address of the next token and
     updating STRING_PTR to point to the beginning of the next token.

     One difference between 'strsep' and 'strtok_r' is that if the input
     string contains more than one character from DELIMITER in a row
     'strsep' returns an empty string for each pair of characters from
     DELIMITER.  This means that a program normally should test for
     'strsep' returning an empty string before processing it.

     This function was introduced in 4.3BSD and therefore is widely
     available.

   Here is how the above example looks like when 'strsep' is used.

     #include <string.h>
     #include <stddef.h>

     ...

     const char string[] = "words separated by spaces -- and, punctuation!";
     const char delimiters[] = " .,;:!-";
     char *running;
     char *token;

     ...

     running = strdupa (string);
     token = strsep (&running, delimiters);    /* token => "words" */
     token = strsep (&running, delimiters);    /* token => "separated" */
     token = strsep (&running, delimiters);    /* token => "by" */
     token = strsep (&running, delimiters);    /* token => "spaces" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "and" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "punctuation" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => NULL */

 -- Function: char * basename (const char *FILENAME)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The GNU version of the 'basename' function returns the last
     component of the path in FILENAME.  This function is the preferred
     usage, since it does not modify the argument, FILENAME, and
     respects trailing slashes.  The prototype for 'basename' can be
     found in 'string.h'.  Note, this function is overriden by the XPG
     version, if 'libgen.h' is included.

     Example of using GNU 'basename':

          #include <string.h>

          int
          main (int argc, char *argv[])
          {
            char *prog = basename (argv[0]);

            if (argc < 2)
              {
                fprintf (stderr, "Usage %s <arg>\n", prog);
                exit (1);
              }

            ...
          }

     *Portability Note:* This function may produce different results on
     different systems.

 -- Function: char * basename (const char *PATH)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is the standard XPG defined 'basename'.  It is similar in
     spirit to the GNU version, but may modify the PATH by removing
     trailing '/' characters.  If the PATH is made up entirely of '/'
     characters, then "/" will be returned.  Also, if PATH is 'NULL' or
     an empty string, then "."  is returned.  The prototype for the XPG
     version can be found in 'libgen.h'.

     Example of using XPG 'basename':

          #include <libgen.h>

          int
          main (int argc, char *argv[])
          {
            char *prog;
            char *path = strdupa (argv[0]);

            prog = basename (path);

            if (argc < 2)
              {
                fprintf (stderr, "Usage %s <arg>\n", prog);
                exit (1);
              }

            ...

          }

 -- Function: char * dirname (char *PATH)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'dirname' function is the compliment to the XPG version of
     'basename'.  It returns the parent directory of the file specified
     by PATH.  If PATH is 'NULL', an empty string, or contains no '/'
     characters, then "."  is returned.  The prototype for this function
     can be found in 'libgen.h'.


File: libc.info,  Node: strfry,  Next: Trivial Encryption,  Prev: Finding Tokens in a String,  Up: String and Array Utilities

5.9 strfry
==========

The function below addresses the perennial programming quandary: "How do
I take good data in string form and painlessly turn it into garbage?"
This is actually a fairly simple task for C programmers who do not use
the GNU C Library string functions, but for programs based on the GNU C
Library, the 'strfry' function is the preferred method for destroying
string data.

   The prototype for this function is in 'string.h'.

 -- Function: char * strfry (char *STRING)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'strfry' creates a pseudorandom anagram of a string, replacing the
     input with the anagram in place.  For each position in the string,
     'strfry' swaps it with a position in the string selected at random
     (from a uniform distribution).  The two positions may be the same.

     The return value of 'strfry' is always STRING.

     *Portability Note:* This function is unique to the GNU C Library.


File: libc.info,  Node: Trivial Encryption,  Next: Encode Binary Data,  Prev: strfry,  Up: String and Array Utilities

5.10 Trivial Encryption
=======================

The 'memfrob' function converts an array of data to something
unrecognizable and back again.  It is not encryption in its usual sense
since it is easy for someone to convert the encrypted data back to clear
text.  The transformation is analogous to Usenet's "Rot13" encryption
method for obscuring offensive jokes from sensitive eyes and such.
Unlike Rot13, 'memfrob' works on arbitrary binary data, not just text.

   For true encryption, *Note Cryptographic Functions::.

   This function is declared in 'string.h'.

 -- Function: void * memfrob (void *MEM, size_t LENGTH)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     'memfrob' transforms (frobnicates) each byte of the data structure
     at MEM, which is LENGTH bytes long, by bitwise exclusive oring it
     with binary 00101010.  It does the transformation in place and its
     return value is always MEM.

     Note that 'memfrob' a second time on the same data structure
     returns it to its original state.

     This is a good function for hiding information from someone who
     doesn't want to see it or doesn't want to see it very much.  To
     really prevent people from retrieving the information, use stronger
     encryption such as that described in *Note Cryptographic
     Functions::.

     *Portability Note:* This function is unique to the GNU C Library.


File: libc.info,  Node: Encode Binary Data,  Next: Argz and Envz Vectors,  Prev: Trivial Encryption,  Up: String and Array Utilities

5.11 Encode Binary Data
=======================

To store or transfer binary data in environments which only support text
one has to encode the binary data by mapping the input bytes to
characters in the range allowed for storing or transferring.  SVID
systems (and nowadays XPG compliant systems) provide minimal support for
this task.

 -- Function: char * l64a (long int N)
     Preliminary: | MT-Unsafe race:l64a | AS-Unsafe | AC-Safe | *Note
     POSIX Safety Concepts::.

     This function encodes a 32-bit input value using characters from
     the basic character set.  It returns a pointer to a 7 character
     buffer which contains an encoded version of N.  To encode a series
     of bytes the user must copy the returned string to a destination
     buffer.  It returns the empty string if N is zero, which is
     somewhat bizarre but mandated by the standard.
     *Warning:* Since a static buffer is used this function should not
     be used in multi-threaded programs.  There is no thread-safe
     alternative to this function in the C library.
     *Compatibility Note:* The XPG standard states that the return value
     of 'l64a' is undefined if N is negative.  In the GNU
     implementation, 'l64a' treats its argument as unsigned, so it will
     return a sensible encoding for any nonzero N; however, portable
     programs should not rely on this.

     To encode a large buffer 'l64a' must be called in a loop, once for
     each 32-bit word of the buffer.  For example, one could do
     something like this:

          char *
          encode (const void *buf, size_t len)
          {
            /* We know in advance how long the buffer has to be. */
            unsigned char *in = (unsigned char *) buf;
            char *out = malloc (6 + ((len + 3) / 4) * 6 + 1);
            char *cp = out, *p;

            /* Encode the length. */
            /* Using 'htonl' is necessary so that the data can be
               decoded even on machines with different byte order.
               'l64a' can return a string shorter than 6 bytes, so 
               we pad it with encoding of 0 ('.') at the end by 
               hand. */

            p = stpcpy (cp, l64a (htonl (len)));
            cp = mempcpy (p, "......", 6 - (p - cp));

            while (len > 3)
              {
                unsigned long int n = *in++;
                n = (n << 8) | *in++;
                n = (n << 8) | *in++;
                n = (n << 8) | *in++;
                len -= 4;
                p = stpcpy (cp, l64a (htonl (n)));
                cp = mempcpy (p, "......", 6 - (p - cp));
              }
            if (len > 0)
              {
                unsigned long int n = *in++;
                if (--len > 0)
                  {
                    n = (n << 8) | *in++;
                    if (--len > 0)
                      n = (n << 8) | *in;
                  }
                cp = stpcpy (cp, l64a (htonl (n)));
              }
            *cp = '\0';
            return out;
          }

     It is strange that the library does not provide the complete
     functionality needed but so be it.

   To decode data produced with 'l64a' the following function should be
used.

 -- Function: long int a64l (const char *STRING)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The parameter STRING should contain a string which was produced by
     a call to 'l64a'.  The function processes at least 6 characters of
     this string, and decodes the characters it finds according to the
     table below.  It stops decoding when it finds a character not in
     the table, rather like 'atoi'; if you have a buffer which has been
     broken into lines, you must be careful to skip over the end-of-line
     characters.

     The decoded number is returned as a 'long int' value.

   The 'l64a' and 'a64l' functions use a base 64 encoding, in which each
character of an encoded string represents six bits of an input word.
These symbols are used for the base 64 digits:

        0     1     2     3     4     5     6     7
0       '.'   '/'   '0'   '1'   '2'   '3'   '4'   '5'
8       '6'   '7'   '8'   '9'   'A'   'B'   'C'   'D'
16      'E'   'F'   'G'   'H'   'I'   'J'   'K'   'L'
24      'M'   'N'   'O'   'P'   'Q'   'R'   'S'   'T'
32      'U'   'V'   'W'   'X'   'Y'   'Z'   'a'   'b'
40      'c'   'd'   'e'   'f'   'g'   'h'   'i'   'j'
48      'k'   'l'   'm'   'n'   'o'   'p'   'q'   'r'
56      's'   't'   'u'   'v'   'w'   'x'   'y'   'z'

   This encoding scheme is not standard.  There are some other encoding
methods which are much more widely used (UU encoding, MIME encoding).
Generally, it is better to use one of these encodings.


File: libc.info,  Node: Argz and Envz Vectors,  Prev: Encode Binary Data,  Up: String and Array Utilities

5.12 Argz and Envz Vectors
==========================

"argz vectors" are vectors of strings in a contiguous block of memory,
each element separated from its neighbors by null-characters (''\0'').

   "Envz vectors" are an extension of argz vectors where each element is
a name-value pair, separated by a ''='' character (as in a Unix
environment).

* Menu:

* Argz Functions::              Operations on argz vectors.
* Envz Functions::              Additional operations on environment vectors.


File: libc.info,  Node: Argz Functions,  Next: Envz Functions,  Up: Argz and Envz Vectors

5.12.1 Argz Functions
---------------------

Each argz vector is represented by a pointer to the first element, of
type 'char *', and a size, of type 'size_t', both of which can be
initialized to '0' to represent an empty argz vector.  All argz
functions accept either a pointer and a size argument, or pointers to
them, if they will be modified.

   The argz functions use 'malloc'/'realloc' to allocate/grow argz
vectors, and so any argz vector creating using these functions may be
freed by using 'free'; conversely, any argz function that may grow a
string expects that string to have been allocated using 'malloc' (those
argz functions that only examine their arguments or modify them in place
will work on any sort of memory).  *Note Unconstrained Allocation::.

   All argz functions that do memory allocation have a return type of
'error_t', and return '0' for success, and 'ENOMEM' if an allocation
error occurs.

   These functions are declared in the standard include file 'argz.h'.

 -- Function: error_t argz_create (char *const ARGV[], char **ARGZ,
          size_t *ARGZ_LEN)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'argz_create' function converts the Unix-style argument vector
     ARGV (a vector of pointers to normal C strings, terminated by
     '(char *)0'; *note Program Arguments::) into an argz vector with
     the same elements, which is returned in ARGZ and ARGZ_LEN.

 -- Function: error_t argz_create_sep (const char *STRING, int SEP, char
          **ARGZ, size_t *ARGZ_LEN)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'argz_create_sep' function converts the null-terminated string
     STRING into an argz vector (returned in ARGZ and ARGZ_LEN) by
     splitting it into elements at every occurrence of the character
     SEP.

 -- Function: size_t argz_count (const char *ARGZ, size_t ARG_LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns the number of elements in the argz vector ARGZ and
     ARGZ_LEN.

 -- Function: void argz_extract (const char *ARGZ, size_t ARGZ_LEN, char
          **ARGV)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'argz_extract' function converts the argz vector ARGZ and
     ARGZ_LEN into a Unix-style argument vector stored in ARGV, by
     putting pointers to every element in ARGZ into successive positions
     in ARGV, followed by a terminator of '0'.  ARGV must be
     pre-allocated with enough space to hold all the elements in ARGZ
     plus the terminating '(char *)0' ('(argz_count (ARGZ, ARGZ_LEN) +
     1) * sizeof (char *)' bytes should be enough).  Note that the
     string pointers stored into ARGV point into ARGZ--they are not
     copies--and so ARGZ must be copied if it will be changed while ARGV
     is still active.  This function is useful for passing the elements
     in ARGZ to an exec function (*note Executing a File::).

 -- Function: void argz_stringify (char *ARGZ, size_t LEN, int SEP)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'argz_stringify' converts ARGZ into a normal string with the
     elements separated by the character SEP, by replacing each ''\0''
     inside ARGZ (except the last one, which terminates the string) with
     SEP.  This is handy for printing ARGZ in a readable manner.

 -- Function: error_t argz_add (char **ARGZ, size_t *ARGZ_LEN, const
          char *STR)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'argz_add' function adds the string STR to the end of the argz
     vector '*ARGZ', and updates '*ARGZ' and '*ARGZ_LEN' accordingly.

 -- Function: error_t argz_add_sep (char **ARGZ, size_t *ARGZ_LEN, const
          char *STR, int DELIM)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'argz_add_sep' function is similar to 'argz_add', but STR is
     split into separate elements in the result at occurrences of the
     character DELIM.  This is useful, for instance, for adding the
     components of a Unix search path to an argz vector, by using a
     value of '':'' for DELIM.

 -- Function: error_t argz_append (char **ARGZ, size_t *ARGZ_LEN, const
          char *BUF, size_t BUF_LEN)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'argz_append' function appends BUF_LEN bytes starting at BUF to
     the argz vector '*ARGZ', reallocating '*ARGZ' to accommodate it,
     and adding BUF_LEN to '*ARGZ_LEN'.

 -- Function: void argz_delete (char **ARGZ, size_t *ARGZ_LEN, char
          *ENTRY)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     If ENTRY points to the beginning of one of the elements in the argz
     vector '*ARGZ', the 'argz_delete' function will remove this entry
     and reallocate '*ARGZ', modifying '*ARGZ' and '*ARGZ_LEN'
     accordingly.  Note that as destructive argz functions usually
     reallocate their argz argument, pointers into argz vectors such as
     ENTRY will then become invalid.

 -- Function: error_t argz_insert (char **ARGZ, size_t *ARGZ_LEN, char
          *BEFORE, const char *ENTRY)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'argz_insert' function inserts the string ENTRY into the argz
     vector '*ARGZ' at a point just before the existing element pointed
     to by BEFORE, reallocating '*ARGZ' and updating '*ARGZ' and
     '*ARGZ_LEN'.  If BEFORE is '0', ENTRY is added to the end instead
     (as if by 'argz_add').  Since the first element is in fact the same
     as '*ARGZ', passing in '*ARGZ' as the value of BEFORE will result
     in ENTRY being inserted at the beginning.

 -- Function: char * argz_next (const char *ARGZ, size_t ARGZ_LEN, const
          char *ENTRY)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'argz_next' function provides a convenient way of iterating
     over the elements in the argz vector ARGZ.  It returns a pointer to
     the next element in ARGZ after the element ENTRY, or '0' if there
     are no elements following ENTRY.  If ENTRY is '0', the first
     element of ARGZ is returned.

     This behavior suggests two styles of iteration:

              char *entry = 0;
              while ((entry = argz_next (ARGZ, ARGZ_LEN, entry)))
                ACTION;

     (the double parentheses are necessary to make some C compilers shut
     up about what they consider a questionable 'while'-test) and:

              char *entry;
              for (entry = ARGZ;
                   entry;
                   entry = argz_next (ARGZ, ARGZ_LEN, entry))
                ACTION;

     Note that the latter depends on ARGZ having a value of '0' if it is
     empty (rather than a pointer to an empty block of memory); this
     invariant is maintained for argz vectors created by the functions
     here.

 -- Function: error_t argz_replace (char **ARGZ, size_t *ARGZ_LEN,
          const char *STR, const char *WITH, unsigned *REPLACE_COUNT)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     Replace any occurrences of the string STR in ARGZ with WITH,
     reallocating ARGZ as necessary.  If REPLACE_COUNT is non-zero,
     '*REPLACE_COUNT' will be incremented by number of replacements
     performed.


File: libc.info,  Node: Envz Functions,  Prev: Argz Functions,  Up: Argz and Envz Vectors

5.12.2 Envz Functions
---------------------

Envz vectors are just argz vectors with additional constraints on the
form of each element; as such, argz functions can also be used on them,
where it makes sense.

   Each element in an envz vector is a name-value pair, separated by a
''='' character; if multiple ''='' characters are present in an element,
those after the first are considered part of the value, and treated like
all other non-''\0'' characters.

   If _no_ ''='' characters are present in an element, that element is
considered the name of a "null" entry, as distinct from an entry with an
empty value: 'envz_get' will return '0' if given the name of null entry,
whereas an entry with an empty value would result in a value of '""';
'envz_entry' will still find such entries, however.  Null entries can be
removed with 'envz_strip' function.

   As with argz functions, envz functions that may allocate memory (and
thus fail) have a return type of 'error_t', and return either '0' or
'ENOMEM'.

   These functions are declared in the standard include file 'envz.h'.

 -- Function: char * envz_entry (const char *ENVZ, size_t ENVZ_LEN,
          const char *NAME)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'envz_entry' function finds the entry in ENVZ with the name
     NAME, and returns a pointer to the whole entry--that is, the argz
     element which begins with NAME followed by a ''='' character.  If
     there is no entry with that name, '0' is returned.

 -- Function: char * envz_get (const char *ENVZ, size_t ENVZ_LEN, const
          char *NAME)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'envz_get' function finds the entry in ENVZ with the name NAME
     (like 'envz_entry'), and returns a pointer to the value portion of
     that entry (following the ''='').  If there is no entry with that
     name (or only a null entry), '0' is returned.

 -- Function: error_t envz_add (char **ENVZ, size_t *ENVZ_LEN, const
          char *NAME, const char *VALUE)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'envz_add' function adds an entry to '*ENVZ' (updating '*ENVZ'
     and '*ENVZ_LEN') with the name NAME, and value VALUE.  If an entry
     with the same name already exists in ENVZ, it is removed first.  If
     VALUE is '0', then the new entry will the special null type of
     entry (mentioned above).

 -- Function: error_t envz_merge (char **ENVZ, size_t *ENVZ_LEN, const
          char *ENVZ2, size_t ENVZ2_LEN, int OVERRIDE)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The 'envz_merge' function adds each entry in ENVZ2 to ENVZ, as if
     with 'envz_add', updating '*ENVZ' and '*ENVZ_LEN'.  If OVERRIDE is
     true, then values in ENVZ2 will supersede those with the same name
     in ENVZ, otherwise not.

     Null entries are treated just like other entries in this respect,
     so a null entry in ENVZ can prevent an entry of the same name in
     ENVZ2 from being added to ENVZ, if OVERRIDE is false.

 -- Function: void envz_strip (char **ENVZ, size_t *ENVZ_LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'envz_strip' function removes any null entries from ENVZ,
     updating '*ENVZ' and '*ENVZ_LEN'.


File: libc.info,  Node: Character Set Handling,  Next: Locales,  Prev: String and Array Utilities,  Up: Top

6 Character Set Handling
************************

Character sets used in the early days of computing had only six, seven,
or eight bits for each character: there was never a case where more than
eight bits (one byte) were used to represent a single character.  The
limitations of this approach became more apparent as more people
grappled with non-Roman character sets, where not all the characters
that make up a language's character set can be represented by 2^8
choices.  This chapter shows the functionality that was added to the C
library to support multiple character sets.

* Menu:

* Extended Char Intro::              Introduction to Extended Characters.
* Charset Function Overview::        Overview about Character Handling
                                      Functions.
* Restartable multibyte conversion:: Restartable multibyte conversion
                                      Functions.
* Non-reentrant Conversion::         Non-reentrant Conversion Function.
* Generic Charset Conversion::       Generic Charset Conversion.


File: libc.info,  Node: Extended Char Intro,  Next: Charset Function Overview,  Up: Character Set Handling

6.1 Introduction to Extended Characters
=======================================

A variety of solutions is available to overcome the differences between
character sets with a 1:1 relation between bytes and characters and
character sets with ratios of 2:1 or 4:1.  The remainder of this section
gives a few examples to help understand the design decisions made while
developing the functionality of the C library.

   A distinction we have to make right away is between internal and
external representation.  "Internal representation" means the
representation used by a program while keeping the text in memory.
External representations are used when text is stored or transmitted
through some communication channel.  Examples of external
representations include files waiting in a directory to be read and
parsed.

   Traditionally there has been no difference between the two
representations.  It was equally comfortable and useful to use the same
single-byte representation internally and externally.  This comfort
level decreases with more and larger character sets.

   One of the problems to overcome with the internal representation is
handling text that is externally encoded using different character sets.
Assume a program that reads two texts and compares them using some
metric.  The comparison can be usefully done only if the texts are
internally kept in a common format.

   For such a common format (= character set) eight bits are certainly
no longer enough.  So the smallest entity will have to grow: "wide
characters" will now be used.  Instead of one byte per character, two or
four will be used instead.  (Three are not good to address in memory and
more than four bytes seem not to be necessary).

   As shown in some other part of this manual, a completely new family
has been created of functions that can handle wide character texts in
memory.  The most commonly used character sets for such internal wide
character representations are Unicode and ISO 10646 (also known as UCS
for Universal Character Set).  Unicode was originally planned as a
16-bit character set; whereas, ISO 10646 was designed to be a 31-bit
large code space.  The two standards are practically identical.  They
have the same character repertoire and code table, but Unicode specifies
added semantics.  At the moment, only characters in the first '0x10000'
code positions (the so-called Basic Multilingual Plane, BMP) have been
assigned, but the assignment of more specialized characters outside this
16-bit space is already in progress.  A number of encodings have been
defined for Unicode and ISO 10646 characters: UCS-2 is a 16-bit word
that can only represent characters from the BMP, UCS-4 is a 32-bit word
than can represent any Unicode and ISO 10646 character, UTF-8 is an
ASCII compatible encoding where ASCII characters are represented by
ASCII bytes and non-ASCII characters by sequences of 2-6 non-ASCII
bytes, and finally UTF-16 is an extension of UCS-2 in which pairs of
certain UCS-2 words can be used to encode non-BMP characters up to
'0x10ffff'.

   To represent wide characters the 'char' type is not suitable.  For
this reason the ISO C standard introduces a new type that is designed to
keep one character of a wide character string.  To maintain the
similarity there is also a type corresponding to 'int' for those
functions that take a single wide character.

 -- Data type: wchar_t
     This data type is used as the base type for wide character strings.
     In other words, arrays of objects of this type are the equivalent
     of 'char[]' for multibyte character strings.  The type is defined
     in 'stddef.h'.

     The ISO C90 standard, where 'wchar_t' was introduced, does not say
     anything specific about the representation.  It only requires that
     this type is capable of storing all elements of the basic character
     set.  Therefore it would be legitimate to define 'wchar_t' as
     'char', which might make sense for embedded systems.

     But in the GNU C Library 'wchar_t' is always 32 bits wide and,
     therefore, capable of representing all UCS-4 values and, therefore,
     covering all of ISO 10646.  Some Unix systems define 'wchar_t' as a
     16-bit type and thereby follow Unicode very strictly.  This
     definition is perfectly fine with the standard, but it also means
     that to represent all characters from Unicode and ISO 10646 one has
     to use UTF-16 surrogate characters, which is in fact a
     multi-wide-character encoding.  But resorting to
     multi-wide-character encoding contradicts the purpose of the
     'wchar_t' type.

 -- Data type: wint_t
     'wint_t' is a data type used for parameters and variables that
     contain a single wide character.  As the name suggests this type is
     the equivalent of 'int' when using the normal 'char' strings.  The
     types 'wchar_t' and 'wint_t' often have the same representation if
     their size is 32 bits wide but if 'wchar_t' is defined as 'char'
     the type 'wint_t' must be defined as 'int' due to the parameter
     promotion.

     This type is defined in 'wchar.h' and was introduced in Amendment 1
     to ISO C90.

   As there are for the 'char' data type macros are available for
specifying the minimum and maximum value representable in an object of
type 'wchar_t'.

 -- Macro: wint_t WCHAR_MIN
     The macro 'WCHAR_MIN' evaluates to the minimum value representable
     by an object of type 'wint_t'.

     This macro was introduced in Amendment 1 to ISO C90.

 -- Macro: wint_t WCHAR_MAX
     The macro 'WCHAR_MAX' evaluates to the maximum value representable
     by an object of type 'wint_t'.

     This macro was introduced in Amendment 1 to ISO C90.

   Another special wide character value is the equivalent to 'EOF'.

 -- Macro: wint_t WEOF
     The macro 'WEOF' evaluates to a constant expression of type
     'wint_t' whose value is different from any member of the extended
     character set.

     'WEOF' need not be the same value as 'EOF' and unlike 'EOF' it also
     need _not_ be negative.  In other words, sloppy code like

          {
            int c;
            ...
            while ((c = getc (fp)) < 0)
              ...
          }

     has to be rewritten to use 'WEOF' explicitly when wide characters
     are used:

          {
            wint_t c;
            ...
            while ((c = wgetc (fp)) != WEOF)
              ...
          }

     This macro was introduced in Amendment 1 to ISO C90 and is defined
     in 'wchar.h'.

   These internal representations present problems when it comes to
storing and transmittal.  Because each single wide character consists of
more than one byte, they are affected by byte-ordering.  Thus, machines
with different endianesses would see different values when accessing the
same data.  This byte ordering concern also applies for communication
protocols that are all byte-based and therefore require that the sender
has to decide about splitting the wide character in bytes.  A last (but
not least important) point is that wide characters often require more
storage space than a customized byte-oriented character set.

   For all the above reasons, an external encoding that is different
from the internal encoding is often used if the latter is UCS-2 or
UCS-4.  The external encoding is byte-based and can be chosen
appropriately for the environment and for the texts to be handled.  A
variety of different character sets can be used for this external
encoding (information that will not be exhaustively presented
here-instead, a description of the major groups will suffice).  All of
the ASCII-based character sets fulfill one requirement: they are
"filesystem safe."  This means that the character ''/'' is used in the
encoding _only_ to represent itself.  Things are a bit different for
character sets like EBCDIC (Extended Binary Coded Decimal Interchange
Code, a character set family used by IBM), but if the operating system
does not understand EBCDIC directly the parameters-to-system calls have
to be converted first anyhow.

   * The simplest character sets are single-byte character sets.  There
     can be only up to 256 characters (for 8 bit character sets), which
     is not sufficient to cover all languages but might be sufficient to
     handle a specific text.  Handling of a 8 bit character sets is
     simple.  This is not true for other kinds presented later, and
     therefore, the application one uses might require the use of 8 bit
     character sets.

   * The ISO 2022 standard defines a mechanism for extended character
     sets where one character _can_ be represented by more than one
     byte.  This is achieved by associating a state with the text.
     Characters that can be used to change the state can be embedded in
     the text.  Each byte in the text might have a different
     interpretation in each state.  The state might even influence
     whether a given byte stands for a character on its own or whether
     it has to be combined with some more bytes.

     In most uses of ISO 2022 the defined character sets do not allow
     state changes that cover more than the next character.  This has
     the big advantage that whenever one can identify the beginning of
     the byte sequence of a character one can interpret a text
     correctly.  Examples of character sets using this policy are the
     various EUC character sets (used by Sun's operating systems,
     EUC-JP, EUC-KR, EUC-TW, and EUC-CN) or Shift_JIS (SJIS, a Japanese
     encoding).

     But there are also character sets using a state that is valid for
     more than one character and has to be changed by another byte
     sequence.  Examples for this are ISO-2022-JP, ISO-2022-KR, and
     ISO-2022-CN.

   * Early attempts to fix 8 bit character sets for other languages
     using the Roman alphabet lead to character sets like ISO 6937.
     Here bytes representing characters like the acute accent do not
     produce output themselves: one has to combine them with other
     characters to get the desired result.  For example, the byte
     sequence '0xc2 0x61' (non-spacing acute accent, followed by
     lower-case 'a') to get the "small a with acute" character.  To get
     the acute accent character on its own, one has to write '0xc2 0x20'
     (the non-spacing acute followed by a space).

     Character sets like ISO 6937 are used in some embedded systems such
     as teletex.

   * Instead of converting the Unicode or ISO 10646 text used
     internally, it is often also sufficient to simply use an encoding
     different than UCS-2/UCS-4.  The Unicode and ISO 10646 standards
     even specify such an encoding: UTF-8.  This encoding is able to
     represent all of ISO 10646 31 bits in a byte string of length one
     to six.

     There were a few other attempts to encode ISO 10646 such as UTF-7,
     but UTF-8 is today the only encoding that should be used.  In fact,
     with any luck UTF-8 will soon be the only external encoding that
     has to be supported.  It proves to be universally usable and its
     only disadvantage is that it favors Roman languages by making the
     byte string representation of other scripts (Cyrillic, Greek, Asian
     scripts) longer than necessary if using a specific character set
     for these scripts.  Methods like the Unicode compression scheme can
     alleviate these problems.

   The question remaining is: how to select the character set or
encoding to use.  The answer: you cannot decide about it yourself, it is
decided by the developers of the system or the majority of the users.
Since the goal is interoperability one has to use whatever the other
people one works with use.  If there are no constraints, the selection
is based on the requirements the expected circle of users will have.  In
other words, if a project is expected to be used in only, say, Russia it
is fine to use KOI8-R or a similar character set.  But if at the same
time people from, say, Greece are participating one should use a
character set that allows all people to collaborate.

   The most widely useful solution seems to be: go with the most general
character set, namely ISO 10646.  Use UTF-8 as the external encoding and
problems about users not being able to use their own language adequately
are a thing of the past.

   One final comment about the choice of the wide character
representation is necessary at this point.  We have said above that the
natural choice is using Unicode or ISO 10646.  This is not required, but
at least encouraged, by the ISO C standard.  The standard defines at
least a macro '__STDC_ISO_10646__' that is only defined on systems where
the 'wchar_t' type encodes ISO 10646 characters.  If this symbol is not
defined one should avoid making assumptions about the wide character
representation.  If the programmer uses only the functions provided by
the C library to handle wide character strings there should be no
compatibility problems with other systems.


File: libc.info,  Node: Charset Function Overview,  Next: Restartable multibyte conversion,  Prev: Extended Char Intro,  Up: Character Set Handling

6.2 Overview about Character Handling Functions
===============================================

A Unix C library contains three different sets of functions in two
families to handle character set conversion.  One of the function
families (the most commonly used) is specified in the ISO C90 standard
and, therefore, is portable even beyond the Unix world.  Unfortunately
this family is the least useful one.  These functions should be avoided
whenever possible, especially when developing libraries (as opposed to
applications).

   The second family of functions got introduced in the early Unix
standards (XPG2) and is still part of the latest and greatest Unix
standard: Unix 98.  It is also the most powerful and useful set of
functions.  But we will start with the functions defined in Amendment 1
to ISO C90.


File: libc.info,  Node: Restartable multibyte conversion,  Next: Non-reentrant Conversion,  Prev: Charset Function Overview,  Up: Character Set Handling

6.3 Restartable Multibyte Conversion Functions
==============================================

The ISO C standard defines functions to convert strings from a multibyte
representation to wide character strings.  There are a number of
peculiarities:

   * The character set assumed for the multibyte encoding is not
     specified as an argument to the functions.  Instead the character
     set specified by the 'LC_CTYPE' category of the current locale is
     used; see *note Locale Categories::.

   * The functions handling more than one character at a time require
     NUL terminated strings as the argument (i.e., converting blocks of
     text does not work unless one can add a NUL byte at an appropriate
     place).  The GNU C Library contains some extensions to the standard
     that allow specifying a size, but basically they also expect
     terminated strings.

   Despite these limitations the ISO C functions can be used in many
contexts.  In graphical user interfaces, for instance, it is not
uncommon to have functions that require text to be displayed in a wide
character string if the text is not simple ASCII. The text itself might
come from a file with translations and the user should decide about the
current locale, which determines the translation and therefore also the
external encoding used.  In such a situation (and many others) the
functions described here are perfect.  If more freedom while performing
the conversion is necessary take a look at the 'iconv' functions (*note
Generic Charset Conversion::).

* Menu:

* Selecting the Conversion::     Selecting the conversion and its properties.
* Keeping the state::            Representing the state of the conversion.
* Converting a Character::       Converting Single Characters.
* Converting Strings::           Converting Multibyte and Wide Character
                                  Strings.
* Multibyte Conversion Example:: A Complete Multibyte Conversion Example.


File: libc.info,  Node: Selecting the Conversion,  Next: Keeping the state,  Up: Restartable multibyte conversion

6.3.1 Selecting the conversion and its properties
-------------------------------------------------

We already said above that the currently selected locale for the
'LC_CTYPE' category decides about the conversion that is performed by
the functions we are about to describe.  Each locale uses its own
character set (given as an argument to 'localedef') and this is the one
assumed as the external multibyte encoding.  The wide character set is
always UCS-4 in the GNU C Library.

   A characteristic of each multibyte character set is the maximum
number of bytes that can be necessary to represent one character.  This
information is quite important when writing code that uses the
conversion functions (as shown in the examples below).  The ISO C
standard defines two macros that provide this information.

 -- Macro: int MB_LEN_MAX
     'MB_LEN_MAX' specifies the maximum number of bytes in the multibyte
     sequence for a single character in any of the supported locales.
     It is a compile-time constant and is defined in 'limits.h'.

 -- Macro: int MB_CUR_MAX
     'MB_CUR_MAX' expands into a positive integer expression that is the
     maximum number of bytes in a multibyte character in the current
     locale.  The value is never greater than 'MB_LEN_MAX'.  Unlike
     'MB_LEN_MAX' this macro need not be a compile-time constant, and in
     the GNU C Library it is not.

     'MB_CUR_MAX' is defined in 'stdlib.h'.

   Two different macros are necessary since strictly ISO C90 compilers
do not allow variable length array definitions, but still it is
desirable to avoid dynamic allocation.  This incomplete piece of code
shows the problem:

     {
       char buf[MB_LEN_MAX];
       ssize_t len = 0;

       while (! feof (fp))
         {
           fread (&buf[len], 1, MB_CUR_MAX - len, fp);
           /* ... process buf */
           len -= used;
         }
     }

   The code in the inner loop is expected to have always enough bytes in
the array BUF to convert one multibyte character.  The array BUF has to
be sized statically since many compilers do not allow a variable size.
The 'fread' call makes sure that 'MB_CUR_MAX' bytes are always available
in BUF.  Note that it isn't a problem if 'MB_CUR_MAX' is not a
compile-time constant.


File: libc.info,  Node: Keeping the state,  Next: Converting a Character,  Prev: Selecting the Conversion,  Up: Restartable multibyte conversion

6.3.2 Representing the state of the conversion
----------------------------------------------

In the introduction of this chapter it was said that certain character
sets use a "stateful" encoding.  That is, the encoded values depend in
some way on the previous bytes in the text.

   Since the conversion functions allow converting a text in more than
one step we must have a way to pass this information from one call of
the functions to another.

 -- Data type: mbstate_t
     A variable of type 'mbstate_t' can contain all the information
     about the "shift state" needed from one call to a conversion
     function to another.

     'mbstate_t' is defined in 'wchar.h'.  It was introduced in Amendment 1
     to ISO C90.

   To use objects of type 'mbstate_t' the programmer has to define such
objects (normally as local variables on the stack) and pass a pointer to
the object to the conversion functions.  This way the conversion
function can update the object if the current multibyte character set is
stateful.

   There is no specific function or initializer to put the state object
in any specific state.  The rules are that the object should always
represent the initial state before the first use, and this is achieved
by clearing the whole variable with code such as follows:

     {
       mbstate_t state;
       memset (&state, '\0', sizeof (state));
       /* from now on STATE can be used.  */
       ...
     }

   When using the conversion functions to generate output it is often
necessary to test whether the current state corresponds to the initial
state.  This is necessary, for example, to decide whether to emit escape
sequences to set the state to the initial state at certain sequence
points.  Communication protocols often require this.

 -- Function: int mbsinit (const mbstate_t *PS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The 'mbsinit' function determines whether the state object pointed
     to by PS is in the initial state.  If PS is a null pointer or the
     object is in the initial state the return value is nonzero.
     Otherwise it is zero.

     'mbsinit' was introduced in Amendment 1 to ISO C90 and is declared
     in 'wchar.h'.

   Code using 'mbsinit' often looks similar to this:

     {
       mbstate_t state;
       memset (&state, '\0', sizeof (state));
       /* Use STATE.  */
       ...
       if (! mbsinit (&state))
         {
           /* Emit code to return to initial state.  */
           const wchar_t empty[] = L"";
           const wchar_t *srcp = empty;
           wcsrtombs (outbuf, &srcp, outbuflen, &state);
         }
       ...
     }

   The code to emit the escape sequence to get back to the initial state
is interesting.  The 'wcsrtombs' function can be used to determine the
necessary output code (*note Converting Strings::).  Please note that
with the GNU C Library it is not necessary to perform this extra action
for the conversion from multibyte text to wide character text since the
wide character encoding is not stateful.  But there is nothing mentioned
in any standard that prohibits making 'wchar_t' using a stateful
encoding.


File: libc.info,  Node: Converting a Character,  Next: Converting Strings,  Prev: Keeping the state,  Up: Restartable multibyte conversion

6.3.3 Converting Single Characters
----------------------------------

The most fundamental of the conversion functions are those dealing with
single characters.  Please note that this does not always mean single
bytes.  But since there is very often a subset of the multibyte
character set that consists of single byte sequences, there are
functions to help with converting bytes.  Frequently, ASCII is a subpart
of the multibyte character set.  In such a scenario, each ASCII
character stands for itself, and all other characters have at least a
first byte that is beyond the range 0 to 127.

 -- Function: wint_t btowc (int C)
     Preliminary: | MT-Safe | AS-Unsafe corrupt heap lock dlopen |
     AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The 'btowc' function ("byte to wide character") converts a valid
     single byte character C in the initial shift state into the wide
     character equivalent using the conversion rules from the currently
     selected locale of the 'LC_CTYPE' category.

     If '(unsigned char) C' is no valid single byte multibyte character
     or if C is 'EOF', the function returns 'WEOF'.

     Please note the restriction of C being tested for validity only in
     the initial shift state.  No 'mbstate_t' object is used from which
     the state information is taken, and the function also does not use
     any static state.

     The 'btowc' function was introduced in Amendment 1 to ISO C90 and
     is declared in 'wchar.h'.

   Despite the limitation that the single byte value is always
interpreted in the initial state, this function is actually useful most
of the time.  Most characters are either entirely single-byte character
sets or they are extension to ASCII. But then it is possible to write
code like this (not that this specific example is very useful):

     wchar_t *
     itow (unsigned long int val)
     {
       static wchar_t buf[30];
       wchar_t *wcp = &buf[29];
       *wcp = L'\0';
       while (val != 0)
         {
           *--wcp = btowc ('0' + val % 10);
           val /= 10;
         }
       if (wcp == &buf[29])
         *--wcp = L'0';
       return wcp;
     }

   Why is it necessary to use such a complicated implementation and not
simply cast ''0' + val % 10' to a wide character?  The answer is that
there is no guarantee that one can perform this kind of arithmetic on
the character of the character set used for 'wchar_t' representation.
In other situations the bytes are not constant at compile time and so
the compiler cannot do the work.  In situations like this, using 'btowc'
is required.

There is also a function for the conversion in the other direction.

 -- Function: int wctob (wint_t C)
     Preliminary: | MT-Safe | AS-Unsafe corrupt heap lock dlopen |
     AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The 'wctob' function ("wide character to byte") takes as the
     parameter a valid wide character.  If the multibyte representation
     for this character in the initial state is exactly one byte long,
     the return value of this function is this character.  Otherwise the
     return value is 'EOF'.

     'wctob' was introduced in Amendment 1 to ISO C90 and is declared in
     'wchar.h'.

   There are more general functions to convert single character from
multibyte representation to wide characters and vice versa.  These
functions pose no limit on the length of the multibyte representation
and they also do not require it to be in the initial state.

 -- Function: size_t mbrtowc (wchar_t *restrict PWC, const char
          *restrict S, size_t N, mbstate_t *restrict PS)
     Preliminary: | MT-Unsafe race:mbrtowc/!ps | AS-Unsafe corrupt heap
     lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety
     Concepts::.

     The 'mbrtowc' function ("multibyte restartable to wide character")
     converts the next multibyte character in the string pointed to by S
     into a wide character and stores it in the wide character string
     pointed to by PWC.  The conversion is performed according to the
     locale currently selected for the 'LC_CTYPE' category.  If the
     conversion for the character set used in the locale requires a
     state, the multibyte string is interpreted in the state represented
     by the object pointed to by PS.  If PS is a null pointer, a static,
     internal state variable used only by the 'mbrtowc' function is
     used.

     If the next multibyte character corresponds to the NUL wide
     character, the return value of the function is 0 and the state
     object is afterwards in the initial state.  If the next N or fewer
     bytes form a correct multibyte character, the return value is the
     number of bytes starting from S that form the multibyte character.
     The conversion state is updated according to the bytes consumed in
     the conversion.  In both cases the wide character (either the
     'L'\0'' or the one found in the conversion) is stored in the string
     pointed to by PWC if PWC is not null.

     If the first N bytes of the multibyte string possibly form a valid
     multibyte character but there are more than N bytes needed to
     complete it, the return value of the function is '(size_t) -2' and
     no value is stored.  Please note that this can happen even if N has
     a value greater than or equal to 'MB_CUR_MAX' since the input might
     contain redundant shift sequences.

     If the first 'n' bytes of the multibyte string cannot possibly form
     a valid multibyte character, no value is stored, the global
     variable 'errno' is set to the value 'EILSEQ', and the function
     returns '(size_t) -1'.  The conversion state is afterwards
     undefined.

     'mbrtowc' was introduced in Amendment 1 to ISO C90 and is declared
     in 'wchar.h'.

   Use of 'mbrtowc' is straightforward.  A function that copies a
multibyte string into a wide character string while at the same time
converting all lowercase characters into uppercase could look like this
(this is not the final version, just an example; it has no error
checking, and sometimes leaks memory):

     wchar_t *
     mbstouwcs (const char *s)
     {
       size_t len = strlen (s);
       wchar_t *result = malloc ((len + 1) * sizeof (wchar_t));
       wchar_t *wcp = result;
       wchar_t tmp[1];
       mbstate_t state;
       size_t nbytes;

       memset (&state, '\0', sizeof (state));
       while ((nbytes = mbrtowc (tmp, s, len, &state)) > 0)
         {
           if (nbytes >= (size_t) -2)
             /* Invalid input string.  */
             return NULL;
           *wcp++ = towupper (tmp[0]);
           len -= nbytes;
           s += nbytes;
         }
       return result;
     }

   The use of 'mbrtowc' should be clear.  A single wide character is
stored in 'TMP[0]', and the number of consumed bytes is stored in the
variable NBYTES.  If the conversion is successful, the uppercase variant
of the wide character is stored in the RESULT array and the pointer to
the input string and the number of available bytes is adjusted.

   The only non-obvious thing about 'mbrtowc' might be the way memory is
allocated for the result.  The above code uses the fact that there can
never be more wide characters in the converted results than there are
bytes in the multibyte input string.  This method yields a pessimistic
guess about the size of the result, and if many wide character strings
have to be constructed this way or if the strings are long, the extra
memory required to be allocated because the input string contains
multibyte characters might be significant.  The allocated memory block
can be resized to the correct size before returning it, but a better
solution might be to allocate just the right amount of space for the
result right away.  Unfortunately there is no function to compute the
length of the wide character string directly from the multibyte string.
There is, however, a function that does part of the work.

 -- Function: size_t mbrlen (const char *restrict S, size_t N, mbstate_t
          *PS)
     Preliminary: | MT-Unsafe race:mbrlen/!ps | AS-Unsafe corrupt heap
     lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety
     Concepts::.

     The 'mbrlen' function ("multibyte restartable length") computes the
     number of at most N bytes starting at S, which form the next valid
     and complete multibyte character.

     If the next multibyte character corresponds to the NUL wide
     character, the return value is 0.  If the next N bytes form a valid
     multibyte character, the number of bytes belonging to this
     multibyte character byte sequence is returned.

     If the first N bytes possibly form a valid multibyte character but
     the character is incomplete, the return value is '(size_t) -2'.
     Otherwise the multibyte character sequence is invalid and the
     return value is '(size_t) -1'.

     The multibyte sequence is interpreted in the state represented by
     the object pointed to by PS.  If PS is a null pointer, a state
     object local to 'mbrlen' is used.

     'mbrlen' was introduced in Amendment 1 to ISO C90 and is declared
     in 'wchar.h'.

   The attentive reader now will note that 'mbrlen' can be implemented
as

     mbrtowc (NULL, s, n, ps != NULL ? ps : &internal)

   This is true and in fact is mentioned in the official specification.
How can this function be used to determine the length of the wide
character string created from a multibyte character string?  It is not
directly usable, but we can define a function 'mbslen' using it:

     size_t
     mbslen (const char *s)
     {
       mbstate_t state;
       size_t result = 0;
       size_t nbytes;
       memset (&state, '\0', sizeof (state));
       while ((nbytes = mbrlen (s, MB_LEN_MAX, &state)) > 0)
         {
           if (nbytes >= (size_t) -2)
             /* Something is wrong.  */
             return (size_t) -1;
           s += nbytes;
           ++result;
         }
       return result;
     }

   This function simply calls 'mbrlen' for each multibyte character in
the string and counts the number of function calls.  Please note that we
here use 'MB_LEN_MAX' as the size argument in the 'mbrlen' call.  This
is acceptable since a) this value is larger than the length of the
longest multibyte character sequence and b) we know that the string S
ends with a NUL byte, which cannot be part of any other multibyte
character sequence but the one representing the NUL wide character.
Therefore, the 'mbrlen' function will never read invalid memory.

   Now that this function is available (just to make this clear, this
function is _not_ part of the GNU C Library) we can compute the number
of wide character required to store the converted multibyte character
string S using

     wcs_bytes = (mbslen (s) + 1) * sizeof (wchar_t);

   Please note that the 'mbslen' function is quite inefficient.  The
implementation of 'mbstouwcs' with 'mbslen' would have to perform the
conversion of the multibyte character input string twice, and this
conversion might be quite expensive.  So it is necessary to think about
the consequences of using the easier but imprecise method before doing
the work twice.

 -- Function: size_t wcrtomb (char *restrict S, wchar_t WC, mbstate_t
          *restrict PS)
     Preliminary: | MT-Unsafe race:wcrtomb/!ps | AS-Unsafe corrupt heap
     lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety
     Concepts::.

     The 'wcrtomb' function ("wide character restartable to multibyte")
     converts a single wide character into a multibyte string
     corresponding to that wide character.

     If S is a null pointer, the function resets the state stored in the
     objects pointed to by PS (or the internal 'mbstate_t' object) to
     the initial state.  This can also be achieved by a call like this:

          wcrtombs (temp_buf, L'\0', ps)

     since, if S is a null pointer, 'wcrtomb' performs as if it writes
     into an internal buffer, which is guaranteed to be large enough.

     If WC is the NUL wide character, 'wcrtomb' emits, if necessary, a
     shift sequence to get the state PS into the initial state followed
     by a single NUL byte, which is stored in the string S.

     Otherwise a byte sequence (possibly including shift sequences) is
     written into the string S.  This only happens if WC is a valid wide
     character (i.e., it has a multibyte representation in the character
     set selected by locale of the 'LC_CTYPE' category).  If WC is no
     valid wide character, nothing is stored in the strings S, 'errno'
     is set to 'EILSEQ', the conversion state in PS is undefined and the
     return value is '(size_t) -1'.

     If no error occurred the function returns the number of bytes
     stored in the string S.  This includes all bytes representing shift
     sequences.

     One word about the interface of the function: there is no parameter
     specifying the length of the array S.  Instead the function assumes
     that there are at least 'MB_CUR_MAX' bytes available since this is
     the maximum length of any byte sequence representing a single
     character.  So the caller has to make sure that there is enough
     space available, otherwise buffer overruns can occur.

     'wcrtomb' was introduced in Amendment 1 to ISO C90 and is declared
     in 'wchar.h'.

   Using 'wcrtomb' is as easy as using 'mbrtowc'.  The following example
appends a wide character string to a multibyte character string.  Again,
the code is not really useful (or correct), it is simply here to
demonstrate the use and some problems.

     char *
     mbscatwcs (char *s, size_t len, const wchar_t *ws)
     {
       mbstate_t state;
       /* Find the end of the existing string.  */
       char *wp = strchr (s, '\0');
       len -= wp - s;
       memset (&state, '\0', sizeof (state));
       do
         {
           size_t nbytes;
           if (len < MB_CUR_LEN)
             {
               /* We cannot guarantee that the next
                  character fits into the buffer, so
                  return an error.  */
               errno = E2BIG;
               return NULL;
             }
           nbytes = wcrtomb (wp, *ws, &state);
           if (nbytes == (size_t) -1)
             /* Error in the conversion.  */
             return NULL;
           len -= nbytes;
           wp += nbytes;
         }
       while (*ws++ != L'\0');
       return s;
     }

   First the function has to find the end of the string currently in the
array S.  The 'strchr' call does this very efficiently since a
requirement for multibyte character representations is that the NUL byte
is never used except to represent itself (and in this context, the end
of the string).

   After initializing the state object the loop is entered where the
first task is to make sure there is enough room in the array S.  We
abort if there are not at least 'MB_CUR_LEN' bytes available.  This is
not always optimal but we have no other choice.  We might have less than
'MB_CUR_LEN' bytes available but the next multibyte character might also
be only one byte long.  At the time the 'wcrtomb' call returns it is too
late to decide whether the buffer was large enough.  If this solution is
unsuitable, there is a very slow but more accurate solution.

       ...
       if (len < MB_CUR_LEN)
         {
           mbstate_t temp_state;
           memcpy (&temp_state, &state, sizeof (state));
           if (wcrtomb (NULL, *ws, &temp_state) > len)
             {
               /* We cannot guarantee that the next
                  character fits into the buffer, so
                  return an error.  */
               errno = E2BIG;
               return NULL;
             }
         }
       ...

   Here we perform the conversion that might overflow the buffer so that
we are afterwards in the position to make an exact decision about the
buffer size.  Please note the 'NULL' argument for the destination buffer
in the new 'wcrtomb' call; since we are not interested in the converted
text at this point, this is a nice way to express this.  The most
unusual thing about this piece of code certainly is the duplication of
the conversion state object, but if a change of the state is necessary
to emit the next multibyte character, we want to have the same shift
state change performed in the real conversion.  Therefore, we have to
preserve the initial shift state information.

   There are certainly many more and even better solutions to this
problem.  This example is only provided for educational purposes.


File: libc.info,  Node: Converting Strings,  Next: Multibyte Conversion Example,  Prev: Converting a Character,  Up: Restartable multibyte conversion

6.3.4 Converting Multibyte and Wide Character Strings
-----------------------------------------------------

The functions described in the previous section only convert a single
character at a time.  Most operations to be performed in real-world
programs include strings and therefore the ISO C standard also defines
conversions on entire strings.  However, the defined set of functions is
quite limited; therefore, the GNU C Library contains a few extensions
that can help in some important situations.

 -- Function: size_t mbsrtowcs (wchar_t *restrict DST, const char
          **restrict SRC, size_t LEN, mbstate_t *restrict PS)
     Preliminary: | MT-Unsafe race:mbsrtowcs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The 'mbsrtowcs' function ("multibyte string restartable to wide
     character string") converts a NUL-terminated multibyte character
     string at '*SRC' into an equivalent wide character string,
     including the NUL wide character at the end.  The conversion is
     started using the state information from the object pointed to by
     PS or from an internal object of 'mbsrtowcs' if PS is a null
     pointer.  Before returning, the state object is updated to match
     the state after the last converted character.  The state is the
     initial state if the terminating NUL byte is reached and converted.

     If DST is not a null pointer, the result is stored in the array
     pointed to by DST; otherwise, the conversion result is not
     available since it is stored in an internal buffer.

     If LEN wide characters are stored in the array DST before reaching
     the end of the input string, the conversion stops and LEN is
     returned.  If DST is a null pointer, LEN is never checked.

     Another reason for a premature return from the function call is if
     the input string contains an invalid multibyte sequence.  In this
     case the global variable 'errno' is set to 'EILSEQ' and the
     function returns '(size_t) -1'.

     In all other cases the function returns the number of wide
     characters converted during this call.  If DST is not null,
     'mbsrtowcs' stores in the pointer pointed to by SRC either a null
     pointer (if the NUL byte in the input string was reached) or the
     address of the byte following the last converted multibyte
     character.

     'mbsrtowcs' was introduced in Amendment 1 to ISO C90 and is
     declared in 'wchar.h'.

   The definition of the 'mbsrtowcs' function has one important
limitation.  The requirement that DST has to be a NUL-terminated string
provides problems if one wants to convert buffers with text.  A buffer
is normally no collection of NUL-terminated strings but instead a
continuous collection of lines, separated by newline characters.  Now
assume that a function to convert one line from a buffer is needed.
Since the line is not NUL-terminated, the source pointer cannot directly
point into the unmodified text buffer.  This means, either one inserts
the NUL byte at the appropriate place for the time of the 'mbsrtowcs'
function call (which is not doable for a read-only buffer or in a
multi-threaded application) or one copies the line in an extra buffer
where it can be terminated by a NUL byte.  Note that it is not in
general possible to limit the number of characters to convert by setting
the parameter LEN to any specific value.  Since it is not known how many
bytes each multibyte character sequence is in length, one can only
guess.

   There is still a problem with the method of NUL-terminating a line
right after the newline character, which could lead to very strange
results.  As said in the description of the 'mbsrtowcs' function above
the conversion state is guaranteed to be in the initial shift state
after processing the NUL byte at the end of the input string.  But this
NUL byte is not really part of the text (i.e., the conversion state
after the newline in the original text could be something different than
the initial shift state and therefore the first character of the next
line is encoded using this state).  But the state in question is never
accessible to the user since the conversion stops after the NUL byte
(which resets the state).  Most stateful character sets in use today
require that the shift state after a newline be the initial state-but
this is not a strict guarantee.  Therefore, simply NUL-terminating a
piece of a running text is not always an adequate solution and,
therefore, should never be used in generally used code.

   The generic conversion interface (*note Generic Charset Conversion::)
does not have this limitation (it simply works on buffers, not strings),
and the GNU C Library contains a set of functions that take additional
parameters specifying the maximal number of bytes that are consumed from
the input string.  This way the problem of 'mbsrtowcs''s example above
could be solved by determining the line length and passing this length
to the function.

 -- Function: size_t wcsrtombs (char *restrict DST, const wchar_t
          **restrict SRC, size_t LEN, mbstate_t *restrict PS)
     Preliminary: | MT-Unsafe race:wcsrtombs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The 'wcsrtombs' function ("wide character string restartable to
     multibyte string") converts the NUL-terminated wide character
     string at '*SRC' into an equivalent multibyte character string and
     stores the result in the array pointed to by DST.  The NUL wide
     character is also converted.  The conversion starts in the state
     described in the object pointed to by PS or by a state object
     locally to 'wcsrtombs' in case PS is a null pointer.  If DST is a
     null pointer, the conversion is performed as usual but the result
     is not available.  If all characters of the input string were
     successfully converted and if DST is not a null pointer, the
     pointer pointed to by SRC gets assigned a null pointer.

     If one of the wide characters in the input string has no valid
     multibyte character equivalent, the conversion stops early, sets
     the global variable 'errno' to 'EILSEQ', and returns '(size_t) -1'.

     Another reason for a premature stop is if DST is not a null pointer
     and the next converted character would require more than LEN bytes
     in total to the array DST.  In this case (and if DEST is not a null
     pointer) the pointer pointed to by SRC is assigned a value pointing
     to the wide character right after the last one successfully
     converted.

     Except in the case of an encoding error the return value of the
     'wcsrtombs' function is the number of bytes in all the multibyte
     character sequences stored in DST.  Before returning the state in
     the object pointed to by PS (or the internal object in case PS is a
     null pointer) is updated to reflect the state after the last
     conversion.  The state is the initial shift state in case the
     terminating NUL wide character was converted.

     The 'wcsrtombs' function was introduced in Amendment 1 to ISO C90
     and is declared in 'wchar.h'.

   The restriction mentioned above for the 'mbsrtowcs' function applies
here also.  There is no possibility of directly controlling the number
of input characters.  One has to place the NUL wide character at the
correct place or control the consumed input indirectly via the available
output array size (the LEN parameter).

 -- Function: size_t mbsnrtowcs (wchar_t *restrict DST, const char
          **restrict SRC, size_t NMC, size_t LEN, mbstate_t *restrict
          PS)
     Preliminary: | MT-Unsafe race:mbsnrtowcs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The 'mbsnrtowcs' function is very similar to the 'mbsrtowcs'
     function.  All the parameters are the same except for NMC, which is
     new.  The return value is the same as for 'mbsrtowcs'.

     This new parameter specifies how many bytes at most can be used
     from the multibyte character string.  In other words, the multibyte
     character string '*SRC' need not be NUL-terminated.  But if a NUL
     byte is found within the NMC first bytes of the string, the
     conversion stops here.

     This function is a GNU extension.  It is meant to work around the
     problems mentioned above.  Now it is possible to convert a buffer
     with multibyte character text piece for piece without having to
     care about inserting NUL bytes and the effect of NUL bytes on the
     conversion state.

   A function to convert a multibyte string into a wide character string
and display it could be written like this (this is not a really useful
example):

     void
     showmbs (const char *src, FILE *fp)
     {
       mbstate_t state;
       int cnt = 0;
       memset (&state, '\0', sizeof (state));
       while (1)
         {
           wchar_t linebuf[100];
           const char *endp = strchr (src, '\n');
           size_t n;

           /* Exit if there is no more line.  */
           if (endp == NULL)
             break;

           n = mbsnrtowcs (linebuf, &src, endp - src, 99, &state);
           linebuf[n] = L'\0';
           fprintf (fp, "line %d: \"%S\"\n", linebuf);
         }
     }

   There is no problem with the state after a call to 'mbsnrtowcs'.
Since we don't insert characters in the strings that were not in there
right from the beginning and we use STATE only for the conversion of the
given buffer, there is no problem with altering the state.

 -- Function: size_t wcsnrtombs (char *restrict DST, const wchar_t
          **restrict SRC, size_t NWC, size_t LEN, mbstate_t *restrict
          PS)
     Preliminary: | MT-Unsafe race:wcsnrtombs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The 'wcsnrtombs' function implements the conversion from wide
     character strings to multibyte character strings.  It is similar to
     'wcsrtombs' but, just like 'mbsnrtowcs', it takes an extra
     parameter, which specifies the length of the input string.

     No more than NWC wide characters from the input string '*SRC' are
     converted.  If the input string contains a NUL wide character in
     the first NWC characters, the conversion stops at this place.

     The 'wcsnrtombs' function is a GNU extension and just like
     'mbsnrtowcs' helps in situations where no NUL-terminated input
     strings are available.


File: libc.info,  Node: Multibyte Conversion Example,  Prev: Converting Strings,  Up: Restartable multibyte conversion

6.3.5 A Complete Multibyte Conversion Example
---------------------------------------------

The example programs given in the last sections are only brief and do
not contain all the error checking, etc.  Presented here is a complete
and documented example.  It features the 'mbrtowc' function but it
should be easy to derive versions using the other functions.

     int
     file_mbsrtowcs (int input, int output)
     {
       /* Note the use of 'MB_LEN_MAX'.
          'MB_CUR_MAX' cannot portably be used here.  */
       char buffer[BUFSIZ + MB_LEN_MAX];
       mbstate_t state;
       int filled = 0;
       int eof = 0;

       /* Initialize the state.  */
       memset (&state, '\0', sizeof (state));

       while (!eof)
         {
           ssize_t nread;
           ssize_t nwrite;
           char *inp = buffer;
           wchar_t outbuf[BUFSIZ];
           wchar_t *outp = outbuf;

           /* Fill up the buffer from the input file.  */
           nread = read (input, buffer + filled, BUFSIZ);
           if (nread < 0)
             {
               perror ("read");
               return 0;
             }
           /* If we reach end of file, make a note to read no more. */
           if (nread == 0)
             eof = 1;

           /* 'filled' is now the number of bytes in 'buffer'. */
           filled += nread;

           /* Convert those bytes to wide characters-as many as we can. */
           while (1)
             {
               size_t thislen = mbrtowc (outp, inp, filled, &state);
               /* Stop converting at invalid character;
                  this can mean we have read just the first part
                  of a valid character.  */
               if (thislen == (size_t) -1)
                 break;
               /* We want to handle embedded NUL bytes
                  but the return value is 0.  Correct this.  */
               if (thislen == 0)
                 thislen = 1;
               /* Advance past this character. */
               inp += thislen;
               filled -= thislen;
               ++outp;
             }

           /* Write the wide characters we just made.  */
           nwrite = write (output, outbuf,
                           (outp - outbuf) * sizeof (wchar_t));
           if (nwrite < 0)
             {
               perror ("write");
               return 0;
             }

           /* See if we have a _real_ invalid character. */
           if ((eof && filled > 0) || filled >= MB_CUR_MAX)
             {
               error (0, 0, "invalid multibyte character");
               return 0;
             }

           /* If any characters must be carried forward,
              put them at the beginning of 'buffer'. */
           if (filled > 0)
             memmove (buffer, inp, filled);
         }

       return 1;
     }


File: libc.info,  Node: Non-reentrant Conversion,  Next: Generic Charset Conversion,  Prev: Restartable multibyte conversion,  Up: Character Set Handling

6.4 Non-reentrant Conversion Function
=====================================

The functions described in the previous chapter are defined in Amendment 1
to ISO C90, but the original ISO C90 standard also contained functions
for character set conversion.  The reason that these original functions
are not described first is that they are almost entirely useless.

   The problem is that all the conversion functions described in the
original ISO C90 use a local state.  Using a local state implies that
multiple conversions at the same time (not only when using threads)
cannot be done, and that you cannot first convert single characters and
then strings since you cannot tell the conversion functions which state
to use.

   These original functions are therefore usable only in a very limited
set of situations.  One must complete converting the entire string
before starting a new one, and each string/text must be converted with
the same function (there is no problem with the library itself; it is
guaranteed that no library function changes the state of any of these
functions).  *For the above reasons it is highly requested that the
functions described in the previous section be used in place of
non-reentrant conversion functions.*

* Menu:

* Non-reentrant Character Conversion::  Non-reentrant Conversion of Single
                                         Characters.
* Non-reentrant String Conversion::     Non-reentrant Conversion of Strings.
* Shift State::                         States in Non-reentrant Functions.


File: libc.info,  Node: Non-reentrant Character Conversion,  Next: Non-reentrant String Conversion,  Up: Non-reentrant Conversion

6.4.1 Non-reentrant Conversion of Single Characters
---------------------------------------------------

 -- Function: int mbtowc (wchar_t *restrict RESULT, const char *restrict
          STRING, size_t SIZE)
     Preliminary: | MT-Unsafe race | AS-Unsafe corrupt heap lock dlopen
     | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The 'mbtowc' ("multibyte to wide character") function when called
     with non-null STRING converts the first multibyte character
     beginning at STRING to its corresponding wide character code.  It
     stores the result in '*RESULT'.

     'mbtowc' never examines more than SIZE bytes.  (The idea is to
     supply for SIZE the number of bytes of data you have in hand.)

     'mbtowc' with non-null STRING distinguishes three possibilities:
     the first SIZE bytes at STRING start with valid multibyte
     characters, they start with an invalid byte sequence or just part
     of a character, or STRING points to an empty string (a null
     character).

     For a valid multibyte character, 'mbtowc' converts it to a wide
     character and stores that in '*RESULT', and returns the number of
     bytes in that character (always at least 1 and never more than
     SIZE).

     For an invalid byte sequence, 'mbtowc' returns -1.  For an empty
     string, it returns 0, also storing ''\0'' in '*RESULT'.

     If the multibyte character code uses shift characters, then
     'mbtowc' maintains and updates a shift state as it scans.  If you
     call 'mbtowc' with a null pointer for STRING, that initializes the
     shift state to its standard initial value.  It also returns nonzero
     if the multibyte character code in use actually has a shift state.
     *Note Shift State::.

 -- Function: int wctomb (char *STRING, wchar_t WCHAR)
     Preliminary: | MT-Unsafe race | AS-Unsafe corrupt heap lock dlopen
     | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The 'wctomb' ("wide character to multibyte") function converts the
     wide character code WCHAR to its corresponding multibyte character
     sequence, and stores the result in bytes starting at STRING.  At
     most 'MB_CUR_MAX' characters are stored.

     'wctomb' with non-null STRING distinguishes three possibilities for
     WCHAR: a valid wide character code (one that can be translated to a
     multibyte character), an invalid code, and 'L'\0''.

     Given a valid code, 'wctomb' converts it to a multibyte character,
     storing the bytes starting at STRING.  Then it returns the number
     of bytes in that character (always at least 1 and never more than
     'MB_CUR_MAX').

     If WCHAR is an invalid wide character code, 'wctomb' returns -1.
     If WCHAR is 'L'\0'', it returns '0', also storing ''\0'' in
     '*STRING'.

     If the multibyte character code uses shift characters, then
     'wctomb' maintains and updates a shift state as it scans.  If you
     call 'wctomb' with a null pointer for STRING, that initializes the
     shift state to its standard initial value.  It also returns nonzero
     if the multibyte character code in use actually has a shift state.
     *Note Shift State::.

     Calling this function with a WCHAR argument of zero when STRING is
     not null has the side-effect of reinitializing the stored shift
     state _as well as_ storing the multibyte character ''\0'' and
     returning 0.

   Similar to 'mbrlen' there is also a non-reentrant function that
computes the length of a multibyte character.  It can be defined in
terms of 'mbtowc'.

 -- Function: int mblen (const char *STRING, size_t SIZE)
     Preliminary: | MT-Unsafe race | AS-Unsafe corrupt heap lock dlopen
     | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The 'mblen' function with a non-null STRING argument returns the
     number of bytes that make up the multibyte character beginning at
     STRING, never examining more than SIZE bytes.  (The idea is to
     supply for SIZE the number of bytes of data you have in hand.)

     The return value of 'mblen' distinguishes three possibilities: the
     first SIZE bytes at STRING start with valid multibyte characters,
     they start with an invalid byte sequence or just part of a
     character, or STRING points to an empty string (a null character).

     For a valid multibyte character, 'mblen' returns the number of
     bytes in that character (always at least '1' and never more than
     SIZE).  For an invalid byte sequence, 'mblen' returns -1.  For an
     empty string, it returns 0.

     If the multibyte character code uses shift characters, then 'mblen'
     maintains and updates a shift state as it scans.  If you call
     'mblen' with a null pointer for STRING, that initializes the shift
     state to its standard initial value.  It also returns a nonzero
     value if the multibyte character code in use actually has a shift
     state.  *Note Shift State::.

     The function 'mblen' is declared in 'stdlib.h'.