diff -Naur newlib-1.17.0/COPYING.LIBGLOSS newlib-1.17.0-new/COPYING.LIBGLOSS
--- newlib-1.17.0/COPYING.LIBGLOSS	2008-12-18 00:16:07.000000000 +0100
+++ newlib-1.17.0-new/COPYING.LIBGLOSS	2009-05-22 09:57:49.000000000 +0200
@@ -228,3 +228,33 @@
  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  SUCH DAMAGE.
+
+(13) Atmel Corporation  (avr32 targets only)
+Copyright (c) 2006, Atmel Corporation All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+and/or other materials provided with the distribution.
+
+3. The name of ATMEL may not be used to endorse or promote products
+derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY
+DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
+WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
diff -Naur newlib-1.17.0/COPYING.NEWLIB newlib-1.17.0-new/COPYING.NEWLIB
--- newlib-1.17.0/COPYING.NEWLIB	2008-12-18 00:16:07.000000000 +0100
+++ newlib-1.17.0-new/COPYING.NEWLIB	2009-05-22 09:57:49.000000000 +0200
@@ -767,3 +767,33 @@
  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  SUCH DAMAGE.
+
+(35) Atmel Corporation  (avr32 targets only)
+Copyright (c) 2006, Atmel Corporation All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+and/or other materials provided with the distribution.
+
+3. The name of ATMEL may not be used to endorse or promote products
+derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY
+DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
+WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
diff -Naur newlib-1.17.0/newlib/configure.host newlib-1.17.0-new/newlib/configure.host
--- newlib-1.17.0/newlib/configure.host	2008-12-18 00:09:09.000000000 +0100
+++ newlib-1.17.0-new/newlib/configure.host	2009-05-22 09:57:49.000000000 +0200
@@ -99,6 +99,10 @@
   arm)
 	machine_dir=arm
 	;;
+  avr32*)
+	machine_dir=avr32
+	newlib_cflags="${newlib_cflags} -ffunction-sections"
+	;;
   avr*)
 	newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues"
 	;;
@@ -365,6 +369,9 @@
   crx*)
 	sys_dir=
 	;;
+  avr32-*-*)
+	sys_dir=avr32 
+	;;
   d10v*)
 	sys_dir=d10v
 	;;
@@ -575,6 +582,10 @@
   arc*)
 	newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED"
 	;;
+  avr32*)
+	syscall_dir=syscalls	
+	newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM"
+	;;
   avr*)
 	newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"
 	;;
diff -Naur newlib-1.17.0/newlib/libc/include/machine/ieeefp.h newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h
--- newlib-1.17.0/newlib/libc/include/machine/ieeefp.h	2008-12-11 21:05:38.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h	2009-05-22 09:57:49.000000000 +0200
@@ -275,6 +275,10 @@
 #define _DOUBLE_IS_32BITS
 #endif
 
+#ifdef __AVR32__
+#define __IEEE_BIG_ENDIAN
+#endif
+
 #if defined(__or32__) || defined(__or1k__) || defined(__or16__)
 #define __IEEE_BIG_ENDIAN
 #endif
diff -Naur newlib-1.17.0/newlib/libc/include/machine/setjmp.h newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h
--- newlib-1.17.0/newlib/libc/include/machine/setjmp.h	2008-12-11 21:05:38.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h	2009-05-22 09:57:49.000000000 +0200
@@ -13,6 +13,13 @@
 #define _JBLEN 24
 #endif
 
+#if defined(__AVR32__)
+/*
+  r0-r7, lr, sp
+ */
+#define _JBLEN 10
+#endif
+
 #ifdef __sparc__
 /*
  * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext).
diff -Naur newlib-1.17.0/newlib/libc/include/machine/time.h newlib-1.17.0-new/newlib/libc/include/machine/time.h
--- newlib-1.17.0/newlib/libc/include/machine/time.h	2000-12-04 20:06:37.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/include/machine/time.h	2009-05-22 09:57:49.000000000 +0200
@@ -6,6 +6,10 @@
 #else  /* !__rtems__ */
 #if defined(__arm__) || defined(__thumb__)
 #define _CLOCKS_PER_SEC_ 100
+#else
+#if defined(__AVR32__)
+#define _CLOCKS_PER_SEC_ 1000000
+#endif
 #endif
 #endif /* !__rtems__ */
 
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4
--- newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4	2009-05-22 09:57:49.000000000 +0200
@@ -0,0 +1,382 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4-p6
+
+dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+dnl This provides configure definitions used by all the newlib
+dnl configure.in files.
+
+dnl Basic newlib configury.  This calls basic introductory stuff,
+dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
+dnl configure.host.  The only argument is the relative path to the top
+dnl newlib directory.
+
+AC_DEFUN(NEWLIB_CONFIGURE,
+[
+dnl Default to --enable-multilib
+AC_ARG_ENABLE(multilib,
+[  --enable-multilib         build many library versions (default)],
+[case "${enableval}" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
+ esac], [multilib=yes])dnl
+
+dnl Support --enable-target-optspace
+AC_ARG_ENABLE(target-optspace,
+[  --enable-target-optspace  optimize for space],
+[case "${enableval}" in
+  yes) target_optspace=yes ;;
+  no)  target_optspace=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
+ esac], [target_optspace=])dnl
+
+dnl Support --enable-malloc-debugging - currently only supported for Cygwin
+AC_ARG_ENABLE(malloc-debugging,
+[  --enable-malloc-debugging indicate malloc debugging requested],
+[case "${enableval}" in
+  yes) malloc_debugging=yes ;;
+  no)  malloc_debugging=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
+ esac], [malloc_debugging=])dnl
+
+dnl Support --enable-newlib-mb
+AC_ARG_ENABLE(newlib-mb,
+[  --enable-newlib-mb        enable multibyte support],
+[case "${enableval}" in
+  yes) newlib_mb=yes ;;
+  no)  newlib_mb=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
+ esac], [newlib_mb=])dnl
+
+dnl Support --enable-newlib-iconv
+AC_ARG_ENABLE(newlib-iconv,
+[  --enable-newlib-iconv     enable iconv library support],
+[case "${enableval}" in
+  yes) newlib_iconv=yes ;;
+  no)  newlib_iconv=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;;
+ esac], [newlib_iconv=])dnl
+
+dnl Support --enable-newlib-builtin-converters
+AC_ARG_ENABLE(newlib-builtin-converters,
+[  --enable-newlib-builtin-converters   enable specific comma-separated list of iconv converters to be built-in],
+[if test x${enableval} = x; then
+   AC_MSG_ERROR(bad value ${enableval} for newlib-builtin-converters option - use comma-separated list)
+ fi
+ builtin_converters=${enableval}
+ ], [builtin_converters=])dnl
+
+dnl Support --enable-newlib-multithread
+AC_ARG_ENABLE(newlib-multithread,
+[  --enable-newlib-multithread        enable support for multiple threads],
+[case "${enableval}" in
+  yes) newlib_multithread=yes ;;
+  no)  newlib_multithread=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
+ esac], [newlib_multithread=yes])dnl
+
+dnl Support --enable-newlib-elix-level
+AC_ARG_ENABLE(newlib-elix-level,
+[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
+[case "${enableval}" in
+  0)   newlib_elix_level=0 ;;
+  1)   newlib_elix_level=1 ;;
+  2)   newlib_elix_level=2 ;;
+  3)   newlib_elix_level=3 ;;
+  4)   newlib_elix_level=4 ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
+ esac], [newlib_elix_level=0])dnl
+
+dnl Support --disable-newlib-io-float
+AC_ARG_ENABLE(newlib-io-float,
+[  --disable-newlib-io-float disable printf/scanf family float support],
+[case "${enableval}" in
+  yes) newlib_io_float=yes ;;
+  no)  newlib_io_float=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
+ esac], [newlib_io_float=yes])dnl
+
+dnl Support --disable-newlib-supplied-syscalls
+AC_ARG_ENABLE(newlib-supplied-syscalls,
+[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
+[case "${enableval}" in
+  yes) newlib_may_supply_syscalls=yes ;;
+  no)  newlib_may_supply_syscalls=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
+ esac], [newlib_may_supply_syscalls=yes])dnl
+
+AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
+
+dnl We may get other options which we don't document:
+dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
+
+test -z "[$]{with_target_subdir}" && with_target_subdir=.
+
+if test "[$]{srcdir}" = "."; then
+  if test "[$]{with_target_subdir}" != "."; then
+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
+  else
+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
+  fi
+else
+  newlib_basedir="[$]{srcdir}/$1"
+fi
+AC_SUBST(newlib_basedir)
+
+AC_CANONICAL_SYSTEM
+
+AM_INIT_AUTOMAKE(newlib, 1.12.0)
+
+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable.  This should really be fixed in autoconf
+# itself.
+
+AC_DEFUN(LIB_AC_PROG_CC,
+[AC_BEFORE([$0], [AC_PROG_CPP])dnl
+AC_CHECK_PROG(CC, gcc, gcc)
+if test -z "$CC"; then
+  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
+  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+fi
+
+AC_PROG_CC_GNU
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+dnl Check whether -g works, even if CFLAGS is set, in case the package
+dnl plays around with CFLAGS (such as to build both debugging and
+dnl normal versions of a library), tasteless as that idea is.
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  AC_PROG_CC_G
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+])
+
+LIB_AC_PROG_CC
+
+AC_CHECK_TOOL(AS, as)
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+
+AC_PROG_INSTALL
+
+AM_MAINTAINER_MODE
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables.  So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+  AC_EXEEXT
+fi
+
+. [$]{newlib_basedir}/configure.host
+
+newlib_cflags="[$]{newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+AC_SUBST(NEWLIB_CFLAGS)
+
+LDFLAGS=${ldflags}
+AC_SUBST(LDFLAGS)
+
+AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
+AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
+AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
+AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
+AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
+
+AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
+
+# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
+# use oext, which is set in configure.host based on the target platform.
+OBJEXT=${oext}
+
+AC_SUBST(OBJEXT)
+AC_SUBST(oext)
+AC_SUBST(aext)
+
+AC_SUBST(libm_machine_dir)
+AC_SUBST(machine_dir)
+AC_SUBST(sys_dir)
+])
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+# Copyright 2002  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+	 [AM_AUTOMAKE_VERSION([1.4-p6])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "[$]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "[$]2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN([AM_MISSING_PROG],
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+   $1=$2
+   AC_MSG_RESULT(found)
+else
+   $1="$3/missing $2"
+   AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Define a conditional.
+
+AC_DEFUN([AM_CONDITIONAL],
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
+  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST(MAINT)dnl
+]
+)
+
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure newlib-1.17.0-new/newlib/libc/machine/avr32/configure
--- newlib-1.17.0/newlib/libc/machine/avr32/configure	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure	2009-05-22 09:57:49.000000000 +0200
@@ -0,0 +1,3950 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+
+  if test $as_have_required = yes && 	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  case $as_dir in
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
+        export CONFIG_SHELL
+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell autoconf@gnu.org about your system,
+  echo including any error possibly output before this
+  echo message
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+    as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME='newlib'
+PACKAGE_TARNAME='newlib'
+PACKAGE_VERSION='NEWLIB_VERSION'
+PACKAGE_STRING='newlib NEWLIB_VERSION'
+PACKAGE_BUGREPORT=''
+
+ac_unique_file="Makefile.am"
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+MAY_SUPPLY_SYSCALLS_TRUE
+MAY_SUPPLY_SYSCALLS_FALSE
+newlib_basedir
+build
+build_cpu
+build_vendor
+build_os
+host
+host_cpu
+host_vendor
+host_os
+target
+target_cpu
+target_vendor
+target_os
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+SET_MAKE
+CC
+AS
+AR
+RANLIB
+MAINTAINER_MODE_TRUE
+MAINTAINER_MODE_FALSE
+MAINT
+NEWLIB_CFLAGS
+LDFLAGS
+ELIX_LEVEL_0_TRUE
+ELIX_LEVEL_0_FALSE
+ELIX_LEVEL_1_TRUE
+ELIX_LEVEL_1_FALSE
+ELIX_LEVEL_2_TRUE
+ELIX_LEVEL_2_FALSE
+ELIX_LEVEL_3_TRUE
+ELIX_LEVEL_3_FALSE
+ELIX_LEVEL_4_TRUE
+ELIX_LEVEL_4_FALSE
+USE_LIBTOOL_TRUE
+USE_LIBTOOL_FALSE
+OBJEXT
+oext
+aext
+libm_machine_dir
+machine_dir
+sys_dir
+LIBOBJS
+LTLIBOBJS'
+ac_subst_files=''
+      ac_precious_vars='build_alias
+host_alias
+target_alias'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute directory names.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { echo "$as_me: error: Working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$0" ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$0" : 'X\(//\)[^/]' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$0" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+   { (exit 1); exit 1; }; }
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+			  [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+			  [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR          info documentation [DATAROOTDIR/info]
+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR           man documentation [DATAROOTDIR/man]
+  --docdir=DIR           documentation root [DATAROOTDIR/doc/newlib]
+  --htmldir=DIR          html documentation [DOCDIR]
+  --dvidir=DIR           dvi documentation [DOCDIR]
+  --pdfdir=DIR           pdf documentation [DOCDIR]
+  --psdir=DIR            ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-multilib         build many library versions (default)
+  --enable-target-optspace  optimize for space
+  --enable-malloc-debugging indicate malloc debugging requested
+  --enable-newlib-mb        enable multibyte support
+  --enable-newlib-iconv     enable iconv library support
+  --enable-newlib-builtin-converters   enable specific comma-separated list of iconv converters to be built-in
+  --enable-newlib-multithread        enable support for multiple threads
+  --enable-newlib-elix-level         supply desired elix library level (1-4)
+  --disable-newlib-io-float disable printf/scanf family float support
+  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer
+
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" || continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+newlib configure NEWLIB_VERSION
+generated by GNU Autoconf 2.61
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by newlib $as_me NEWLIB_VERSION, which was
+generated by GNU Autoconf 2.61.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      ac_configure_args="$ac_configure_args '$ac_arg'"
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      echo "$as_me: caught signal $ac_signal"
+    echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -n "$CONFIG_SITE"; then
+  set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+  set x "$ac_default_prefix/share/config.site" \
+	"$ac_default_prefix/etc/config.site"
+fi
+shift
+for ac_site_file
+do
+  if test -r "$ac_site_file"; then
+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+	ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+ac_aux_dir=
+for ac_dir in ../../../.. "$srcdir"/../../../..; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+{ echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+echo "$as_me: error: invalid value of canonical build" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+echo "$as_me: error: invalid value of canonical host" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+am__api_version="1.4"
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "$*" != "X $srcdir/configure conftestfile" \
+      && test "$*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+rm -f conftest*
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm -f conftest.sed
+
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+  SET_MAKE=
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+# Check whether --enable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+  enableval=$enable_multilib; case "${enableval}" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
+echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  multilib=yes
+fi
+
+# Check whether --enable-target-optspace was given.
+if test "${enable_target_optspace+set}" = set; then
+  enableval=$enable_target_optspace; case "${enableval}" in
+  yes) target_optspace=yes ;;
+  no)  target_optspace=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
+echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  target_optspace=
+fi
+
+# Check whether --enable-malloc-debugging was given.
+if test "${enable_malloc_debugging+set}" = set; then
+  enableval=$enable_malloc_debugging; case "${enableval}" in
+  yes) malloc_debugging=yes ;;
+  no)  malloc_debugging=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
+echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  malloc_debugging=
+fi
+
+# Check whether --enable-newlib-mb was given.
+if test "${enable_newlib_mb+set}" = set; then
+  enableval=$enable_newlib_mb; case "${enableval}" in
+  yes) newlib_mb=yes ;;
+  no)  newlib_mb=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-mb option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-mb option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_mb=
+fi
+
+# Check whether --enable-newlib-iconv was given.
+if test "${enable_newlib_iconv+set}" = set; then
+  enableval=$enable_newlib_iconv; case "${enableval}" in
+  yes) newlib_iconv=yes ;;
+  no)  newlib_iconv=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_iconv=
+fi
+
+# Check whether --enable-newlib-builtin-converters was given.
+if test "${enable_newlib_builtin_converters+set}" = set; then
+  enableval=$enable_newlib_builtin_converters; if test x${enableval} = x; then
+   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&2;}
+   { (exit 1); exit 1; }; }
+ fi
+ builtin_converters=${enableval}
+
+else
+  builtin_converters=
+fi
+
+# Check whether --enable-newlib-multithread was given.
+if test "${enable_newlib_multithread+set}" = set; then
+  enableval=$enable_newlib_multithread; case "${enableval}" in
+  yes) newlib_multithread=yes ;;
+  no)  newlib_multithread=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_multithread=yes
+fi
+
+# Check whether --enable-newlib-elix-level was given.
+if test "${enable_newlib_elix_level+set}" = set; then
+  enableval=$enable_newlib_elix_level; case "${enableval}" in
+  0)   newlib_elix_level=0 ;;
+  1)   newlib_elix_level=1 ;;
+  2)   newlib_elix_level=2 ;;
+  3)   newlib_elix_level=3 ;;
+  4)   newlib_elix_level=4 ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_elix_level=0
+fi
+
+# Check whether --enable-newlib-io-float was given.
+if test "${enable_newlib_io_float+set}" = set; then
+  enableval=$enable_newlib_io_float; case "${enableval}" in
+  yes) newlib_io_float=yes ;;
+  no)  newlib_io_float=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_io_float=yes
+fi
+
+# Check whether --enable-newlib-supplied-syscalls was given.
+if test "${enable_newlib_supplied_syscalls+set}" = set; then
+  enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
+  yes) newlib_may_supply_syscalls=yes ;;
+  no)  newlib_may_supply_syscalls=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_may_supply_syscalls=yes
+fi
+
+
+
+if test x${newlib_may_supply_syscalls} = xyes; then
+  MAY_SUPPLY_SYSCALLS_TRUE=
+  MAY_SUPPLY_SYSCALLS_FALSE='#'
+else
+  MAY_SUPPLY_SYSCALLS_TRUE='#'
+  MAY_SUPPLY_SYSCALLS_FALSE=
+fi
+
+
+test -z "${with_target_subdir}" && with_target_subdir=.
+
+if test "${srcdir}" = "."; then
+  if test "${with_target_subdir}" != "."; then
+    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
+  else
+    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
+  fi
+else
+  newlib_basedir="${srcdir}/../../.."
+fi
+
+
+{ echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
+if test "${ac_cv_target+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
+else
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
+echo "$as_me: error: invalid value of canonical target" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+PACKAGE=newlib
+
+VERSION=1.12.0
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal-${am__api_version}
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working autoconf" >&5
+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake-${am__api_version}
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working autoheader" >&5
+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working makeinfo" >&5
+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+
+
+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable.  This should really be fixed in autoconf
+# itself.
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+  test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
+echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+#AC_PROG_CC_GNU
+
+if test $ac_cv_c_compiler_gnu = yes; then
+  GCC=yes
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+#  AC_PROG_CC_G
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+    # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+  MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables.  So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+#if false; then
+#
+#fi
+
+. ${newlib_basedir}/configure.host
+
+newlib_cflags="${newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+
+
+LDFLAGS=${ldflags}
+
+
+
+
+if test x${newlib_elix_level} = x0; then
+  ELIX_LEVEL_0_TRUE=
+  ELIX_LEVEL_0_FALSE='#'
+else
+  ELIX_LEVEL_0_TRUE='#'
+  ELIX_LEVEL_0_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x1; then
+  ELIX_LEVEL_1_TRUE=
+  ELIX_LEVEL_1_FALSE='#'
+else
+  ELIX_LEVEL_1_TRUE='#'
+  ELIX_LEVEL_1_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x2; then
+  ELIX_LEVEL_2_TRUE=
+  ELIX_LEVEL_2_FALSE='#'
+else
+  ELIX_LEVEL_2_TRUE='#'
+  ELIX_LEVEL_2_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x3; then
+  ELIX_LEVEL_3_TRUE=
+  ELIX_LEVEL_3_FALSE='#'
+else
+  ELIX_LEVEL_3_TRUE='#'
+  ELIX_LEVEL_3_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x4; then
+  ELIX_LEVEL_4_TRUE=
+  ELIX_LEVEL_4_FALSE='#'
+else
+  ELIX_LEVEL_4_TRUE='#'
+  ELIX_LEVEL_4_FALSE=
+fi
+
+
+
+if test x${use_libtool} = xyes; then
+  USE_LIBTOOL_TRUE=
+  USE_LIBTOOL_FALSE='#'
+else
+  USE_LIBTOOL_TRUE='#'
+  USE_LIBTOOL_FALSE=
+fi
+
+# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
+# use oext, which is set in configure.host based on the target platform.
+OBJEXT=${oext}
+
+
+
+
+
+
+
+
+
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
+    cat confcache >$cache_file
+  else
+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+    as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by newlib $as_me NEWLIB_VERSION, which was
+generated by GNU Autoconf 2.61.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+newlib config.status NEWLIB_VERSION
+configured by $0, generated by GNU Autoconf 2.61,
+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  CONFIG_SHELL=$SHELL
+  export CONFIG_SHELL
+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
+newlib_basedir!$newlib_basedir$ac_delim
+build!$build$ac_delim
+build_cpu!$build_cpu$ac_delim
+build_vendor!$build_vendor$ac_delim
+build_os!$build_os$ac_delim
+host!$host$ac_delim
+host_cpu!$host_cpu$ac_delim
+host_vendor!$host_vendor$ac_delim
+host_os!$host_os$ac_delim
+target!$target$ac_delim
+target_cpu!$target_cpu$ac_delim
+target_vendor!$target_vendor$ac_delim
+target_os!$target_os$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+CC!$CC$ac_delim
+AS!$AS$ac_delim
+AR!$AR$ac_delim
+RANLIB!$RANLIB$ac_delim
+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
+MAINT!$MAINT$ac_delim
+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+oext!$oext$ac_delim
+aext!$aext$ac_delim
+libm_machine_dir!$libm_machine_dir$ac_delim
+machine_dir!$machine_dir$ac_delim
+sys_dir!$sys_dir$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in  :F $CONFIG_FILES
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      ac_file_inputs="$ac_file_inputs $ac_f"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input="Generated from "`IFS=:
+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    fi
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin";;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
+  sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out"; rm -f "$tmp/out";;
+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+  esac
+ ;;
+
+
+
+  esac
+
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure.in newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in
--- newlib-1.17.0/newlib/libc/machine/avr32/configure.in	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,14 @@
+dnl This is the newlib/libc/machine/arm configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([newlib],[NEWLIB_VERSION])
+AC_CONFIG_SRCDIR([Makefile.am])
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
+AC_CONFIG_AUX_DIR(../../../..)
+
+NEWLIB_CONFIGURE(../../..)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am
--- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,16 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+AM_CCASFLAGS = $(INCLUDES)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = strcmp.S strncpy.S memcpy.S
+lib_a_CCASFLAGS=$(AM_CCASFLAGS)
+lib_a_CFLAGS = $(AM_CFLAGS)
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in
--- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,327 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+AR = @AR@
+AS = @AS@
+CC = @CC@
+CPP = @CPP@
+EXEEXT = @EXEEXT@
+LDFLAGS = @LDFLAGS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+aext = @aext@
+libm_machine_dir = @libm_machine_dir@
+machine_dir = @machine_dir@
+newlib_basedir = @newlib_basedir@
+oext = @oext@
+sys_dir = @sys_dir@
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = strcmp.S strncpy.S memcpy.S
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+LIBRARIES =  $(noinst_LIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) 
+CPPFLAGS = 
+LIBS = @LIBS@
+lib_a_LIBADD = 
+lib_a_OBJECTS =  strcmp.o strncpy.o memcpy.o
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+SOURCES = $(lib_a_SOURCES)
+OBJECTS = $(lib_a_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .o .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
+		../../../acinclude.m4 ../../../aclocal.m4 \
+		../../../libtool.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+mostlyclean-noinstLIBRARIES:
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+distclean-noinstLIBRARIES:
+
+maintainer-clean-noinstLIBRARIES:
+
+.c.o:
+	$(COMPILE) -c $<
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
+	-rm -f lib.a
+	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
+	$(RANLIB) lib.a
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am:
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-info-am: 
+install-info: install-info-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(LIBRARIES)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
+		mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
+		mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-noinstLIBRARIES distclean-compile \
+		distclean-tags distclean-generic clean-am
+
+distclean: distclean-am
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
+		maintainer-clean-compile maintainer-clean-tags \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+	-rm -f config.status
+
+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
+check-am installcheck-am installcheck install-info-am install-info \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S
--- newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2004 Atmel Norway
+ */
+
+/* Don't use r12 as dst since we must return it unmodified */
+
+	.text
+	.global	memcpy
+	.type	memcpy, @function
+#if  defined(__AVR32_HAS_UNALIGNED_WORD__)
+memcpy:	
+	/* Check if src and dst are aligned
+	   if not do a word based copying. */
+	or	r9, r12, r11
+	andl	r9, 3, COH
+	brne	.Lunaligned_copy	
+
+	pushm	r12, lr
+	sub	r10, 8
+	brmi	.Lword_copy
+
+0:	
+	ld.d	r8, r11++
+	sub	r10, 8	
+	st.d	r12++, r8
+	brpl	0b
+	
+.Lword_copy:	
+	sub	r10, -4
+	brmi	.Lbyte_copy
+
+0:	
+	ld.w	r8, r11++
+	sub	r10, 4	
+	st.w	r12++, r8
+	brpl	0b
+
+.Lbyte_copy:
+	sub	r10, -4	
+	breq	2f
+1:	
+	ld.ub	r8, r11++
+	sub	r10, 1
+	st.b	r12++, r8
+	brne	1b
+2:	
+	popm	r12, pc
+
+.Lunaligned_copy:
+	mov	r9, r12
+	sub	r10, 4	
+
+	brmi	.Lbyte_copy2
+
+0:	
+	ld.w	r8, r11++
+	sub	r10, 4	
+	st.w	r12++, r8
+	brpl	0b
+
+.Lbyte_copy2:
+	sub	r10, -4	
+	reteq	r9
+1:	
+	ld.ub	r8, r11++
+	sub	r10, 1
+	st.b	r12++, r8
+	brne	1b
+
+	ret	r9
+
+					
+#else	
+	
+#define dst r9
+#define src r11
+#define len r10
+	
+#if  defined(__AVR32_UC__)	
+memcpy:
+	/* If we have less than 8 bytes, don't do anything fancy 
+	   just an unrolled byte copy */
+	cp.w	r10, 8
+	brlt	.Lless_than_8
+	/* Check if src and dst are aligned. */
+	or	r9, r12, r11
+	andl	r9, 3, COH
+	brne	.Lunaligned_copy	
+
+	/* Check if larger than 31 */
+	cp.w	r10, 32
+	brge	.Lmore_than_31:
+
+	/* Less than 32. */
+	asr	r8, r10, 2
+	rsub	r9, r8, 8
+	add	pc, pc, r9 << 2
+	.irp	offset,0,1,2,3,4,5,6
+	ld.w	r9, r11[(6-\offset)*4]
+	st.w	r12[(6-\offset)*4], r9
+	.endr
+	
+	add	r11, r11, r8 << 2 
+	add	r8, r12, r8 << 2 
+	andl	r10, 0x3 
+	rsub	r10, r10, 4
+	add	pc, pc, r10 << 2
+	.irp	offset,0,1,2
+	ld.ub	r9, r11[2-\offset]
+	st.b	r8[2-\offset], r9
+	.endr
+	
+	retal	r12
+
+.Lless_than_8:	
+	rsub	r10, r10, 9
+	add	pc, pc, r10 << 2
+	.irp	offset,0,1,2,3,4,5,6,7
+	ld.ub	r9, r11[7-\offset]
+	st.b	r12[7-\offset], r9
+	.endr
+	
+	retal	r12
+
+.Lmore_than_31:
+	stm	--sp, r6-r7, lr
+	mov	r9, r12
+
+.Laligned_copy:
+	sub	r10, 32
+
+1:	/* Copy 32 bytes at a time */
+	ld.d	r6, r11++
+	st.d	r9++, r6
+	ld.d	r6, r11++
+	st.d	r9++, r6
+	ld.d	r6, r11++
+	st.d	r9++, r6
+	ld.d	r6, r11++
+	st.d	r9++, r6
+	sub	r10, 32
+	brge	1b
+	
+.Lless_than_32:
+	/* Copy 16 more bytes if possible */
+	sub	r10, -16
+	brlt	.Lless_than_16
+	ld.d	r6, r11++
+	st.d	r9++, r6
+	ld.d	r6, r11++
+	st.d	r9++, r6
+	sub	r10, 16
+
+.Lless_than_16:
+
+	/* Do the remaining as byte copies */
+	neg	r10
+	add	pc, pc, r10 << 3
+	nop
+	nop
+	.irp	offset,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
+	ld.ub	r6, r11[14-\offset],e
+	st.b	r9[14-\offset], r6,e
+	.endr
+	
+	ldm	sp++, r6-r7, pc
+
+.Lunaligned_copy:	
+	/* src and dst are unaligned. */
+0:	
+	sub	r10, 1
+	ld.ub	r9, r11[r10]
+	st.b	r12[r10], r9
+	brne	0b
+	
+	retal	r12	
+	.size	memcpy, . - memcpy
+
+#else
+memcpy:
+	pref	src[0]
+	mov	dst, r12
+
+	/* If we have less than 32 bytes, don't do anything fancy */
+	cp.w	len, 32
+	brge	.Lmore_than_31
+
+	sub	len, 1
+	retlt	r12
+1:	ld.ub	r8, src++
+	st.b	r12, r8
+	sub	len, 1
+	brge	1b
+	retal	r12
+
+.Lmore_than_31:
+	pushm	r0-r7, lr
+
+	/* Check alignment */
+	mov	r8, src
+	andl	r8, 31, COH
+	brne	.Lunaligned_src
+	mov	r8, dst
+	andl	r8, 3, COH
+	brne	.Lunaligned_dst
+
+.Laligned_copy:
+	sub	len, 32
+	brlt	.Lless_than_32
+
+1:	/* Copy 32 bytes at a time */
+	pref	src[32]
+	ldm	src, r0-r7
+	sub	src, -32
+	stm	dst, r0-r7
+	sub	dst, -32
+	sub	len, 32
+	brge	1b
+	
+.Lless_than_32:
+	/* Copy 16 more bytes if possible */
+	sub	len, -16
+	brlt	.Lless_than_16
+	ldm	src, r0-r3
+	sub	src, -16
+	sub	len, 16
+	stm	dst, r0-r3
+	sub	dst, -16
+
+.Lless_than_16:
+	/* Do the remaining as byte copies */
+	neg	len
+	add	pc, pc, len << 2
+	.rept	15
+	ld.ub	r0, src++
+	st.b	dst++, r0
+	.endr
+
+	popm	r0-r7, pc
+
+.Lunaligned_src:
+	/* Make src cacheline-aligned. r8 = (src & 31) */
+	rsub	r8, r8, 32
+	sub	len, r8
+1:	ld.ub	r0, src++
+	st.b	dst++, r0
+	sub	r8, 1
+	brne	1b
+
+	/* If dst is word-aligned, we're ready to go */
+	pref	src[0]
+	mov	r8, 3
+	tst	dst, r8
+	breq	.Laligned_copy
+
+.Lunaligned_dst:
+	/* src is aligned, but dst is not. Expect bad performance */
+0:	
+	ld.ub	r0, src++
+	st.b	dst++, r0
+	sub	len, 1
+	brne	0b
+	
+	popm	r0-r7, pc
+	.size	memcpy, . - memcpy
+
+
+#endif
+#endif
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S
--- newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,133 @@
+	.align	2
+	.global strcmp
+
+strcmp:	
+#if !defined(__AVR32_HAS_UNALIGNED_WORD__)
+#ifdef __AVR32_UC__
+	/* Check if both strings are aligned. */
+	or	r10, r12, r11
+	andl	r10, 3, COH
+	brne	.Lbyte_strcmp	
+0:		
+	ld.w	r10, r12[0]
+	ld.w	r9, r11[0]
+	tnbz	r10
+	breq	1f
+	cp.w	r10, r9
+	brne	1f
+	ld.w	r10, r12[4]
+	ld.w	r9, r11[4]
+	tnbz	r10
+	breq	1f
+	cp.w	r10, r9
+	brne	1f
+	ld.w	r10, r12[8]
+	ld.w	r9, r11[8]
+	tnbz	r10
+	breq	1f
+	cp.w	r10, r9
+	brne	1f
+	ld.w	r10, r12[12]
+	ld.w	r9, r11[12]
+	tnbz	r10
+	breq	1f
+	sub	r12, -16
+	sub	r11, -16
+	cp.w	r10, r9
+	breq	0b
+1:
+	bfextu	r12, r10, 24, 8
+	bfextu	r11, r9, 24, 8
+	reteq	r12
+	sub	r12, r11
+	retne	r12
+		
+	bfextu	r12, r10, 16, 8
+	bfextu	r11, r9, 16, 8
+	reteq	r12
+	sub	r12, r11
+	retne	r12
+
+	bfextu	r12, r10, 8, 8
+	bfextu	r11, r9, 8, 8
+	reteq	r12
+	sub	r12, r11
+	retne	r12
+
+	castu.b	r10
+	castu.b	r9
+	sub	r10, r9
+	ret	r10	
+
+.Lbyte_strcmp:	
+0:	
+	ld.ub	r10, r11[0]
+	ld.ub	r9, r12[0]
+	cp.w	r10, 0
+	reteq	r9
+	sub	r9, r10
+	retne	r9
+	ld.ub	r10, r11[1]
+	ld.ub	r9, r12[1]
+	cp.w	r10, 0
+	reteq	r9
+	sub	r9, r10
+	retne	r9
+	ld.ub	r10, r11[2]
+	ld.ub	r9, r12[2]
+	cp.w	r10, 0
+	reteq	r9
+	sub	r9, r10
+	retne	r9
+	ld.ub	r10, r11[3]
+	ld.ub	r9, r12[3]
+	cp.w	r10, 0
+	reteq	r9
+	sub	r9, r10
+	retne	r9
+	sub	r11, -4
+	sub	r12, -4
+	rjmp	0b
+#else
+0:	
+	ld.ub	r10, r11++
+	ld.ub	r9, r12++
+	cp.w	r10, 0
+	reteq	r9
+	sub	r9, r10
+	breq	0b
+	ret	r9
+#endif
+#else
+0:	
+	ld.w	r10, r12++
+	ld.w	r9, r11++
+	tnbz	r10
+	breq	1f
+	cp.w	r10, r9
+	breq	0b
+	
+1:
+	bfextu	r12, r10, 24, 8
+	bfextu	r11, r9, 24, 8
+	reteq	r12
+	sub	r12, r11
+	retne	r12
+		
+	bfextu	r12, r10, 16, 8
+	bfextu	r11, r9, 16, 8
+	reteq	r12
+	sub	r12, r11
+	retne	r12
+
+	bfextu	r12, r10, 8, 8
+	bfextu	r11, r9, 8, 8
+	reteq	r12
+	sub	r12, r11
+	retne	r12
+
+	castu.b	r10
+	castu.b	r9
+	sub	r10, r9
+	ret	r10	
+#endif	
diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S
--- newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,39 @@
+	.align	2
+	.global strncpy
+
+strncpy :	
+#ifdef __AVR32_UC__	
+	mov	r8, 0
+0:	
+	cp.w	r10, r8
+	reteq	r12
+	ld.ub	r9, r11[r8]
+	st.b	r12[r8], r9
+	sub	r8, -1
+	cp.w	r9, 0
+	brne	0b
+
+1:	
+	cp.w	r10, r8
+	reteq	r12
+	st.b	r12[r8], r9
+	sub	r8, -1
+	rjmp	1b
+#else
+	mov	r8, r12
+0:	
+	sub	r10, 1
+	ld.ub	r9, r11++
+	retmi	r12
+	st.b	r8++, r9
+	cp.w	r9, 0
+	brne	0b
+
+1:	
+	sub	r10, 1
+	retmi	r12
+	st.b	r8++, r9
+	rjmp	1b
+	
+	
+#endif	
diff -Naur newlib-1.17.0/newlib/libc/machine/configure newlib-1.17.0-new/newlib/libc/machine/configure
--- newlib-1.17.0/newlib/libc/machine/configure	2008-12-22 20:45:41.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/configure	2009-05-22 09:57:50.000000000 +0200
@@ -1,25 +1,54 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for newlib 1.17.0.
+# Generated by GNU Autoconf 2.61 for newlib 1.17.0.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -29,8 +58,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -44,18 +108,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -63,157 +128,388 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# CDPATH.
+$as_unset CDPATH
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
 fi
 
+  if test $as_have_required = yes && 	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
+  case $as_dir in
 	 /*)
-	   if ("$as_dir/$as_base" -c '
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
+        export CONFIG_SHELL
+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell autoconf@gnu.org about your system,
+  echo including any error possibly output before this
+  echo message
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
+  chmod +x "$as_me.lineno" ||
     { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -222,7 +518,28 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -231,15 +548,6 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 
 
 # Check that we are running under the correct shell.
@@ -390,29 +698,26 @@
 
 
 
+exec 7<&0 </dev/null 6>&1
+
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
 # Identity of this package.
 PACKAGE_NAME='newlib'
 PACKAGE_TARNAME='newlib'
@@ -424,81 +729,228 @@
 # Factoring default headers for most tests.
 ac_includes_default="\
 #include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
 # include <sys/types.h>
 #endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
 # include <sys/stat.h>
 #endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
 # include <stdlib.h>
 # include <stddef.h>
 #else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
 #  include <stdlib.h>
 # endif
 #endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
 #  include <memory.h>
 # endif
 # include <string.h>
 #endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
 # include <strings.h>
 #endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
 # include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
 #endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
 # include <unistd.h>
 #endif"
 
-ac_subdirs_all="$ac_subdirs_all a29k"
-ac_subdirs_all="$ac_subdirs_all arm"
-ac_subdirs_all="$ac_subdirs_all bfin"
-ac_subdirs_all="$ac_subdirs_all cris"
-ac_subdirs_all="$ac_subdirs_all crx"
-ac_subdirs_all="$ac_subdirs_all d10v"
-ac_subdirs_all="$ac_subdirs_all d30v"
-ac_subdirs_all="$ac_subdirs_all fr30"
-ac_subdirs_all="$ac_subdirs_all frv"
-ac_subdirs_all="$ac_subdirs_all h8300"
-ac_subdirs_all="$ac_subdirs_all h8500"
-ac_subdirs_all="$ac_subdirs_all hppa"
-ac_subdirs_all="$ac_subdirs_all i386"
-ac_subdirs_all="$ac_subdirs_all i960"
-ac_subdirs_all="$ac_subdirs_all iq2000"
-ac_subdirs_all="$ac_subdirs_all lm32"
-ac_subdirs_all="$ac_subdirs_all m32c"
-ac_subdirs_all="$ac_subdirs_all m32r"
-ac_subdirs_all="$ac_subdirs_all m68hc11"
-ac_subdirs_all="$ac_subdirs_all m68k"
-ac_subdirs_all="$ac_subdirs_all m88k"
-ac_subdirs_all="$ac_subdirs_all mep"
-ac_subdirs_all="$ac_subdirs_all mips"
-ac_subdirs_all="$ac_subdirs_all mn10200"
-ac_subdirs_all="$ac_subdirs_all mn10300"
-ac_subdirs_all="$ac_subdirs_all mt"
-ac_subdirs_all="$ac_subdirs_all necv70"
-ac_subdirs_all="$ac_subdirs_all powerpc"
-ac_subdirs_all="$ac_subdirs_all sh"
-ac_subdirs_all="$ac_subdirs_all sparc"
-ac_subdirs_all="$ac_subdirs_all spu"
-ac_subdirs_all="$ac_subdirs_all tic4x"
-ac_subdirs_all="$ac_subdirs_all tic80"
-ac_subdirs_all="$ac_subdirs_all v850"
-ac_subdirs_all="$ac_subdirs_all w65"
-ac_subdirs_all="$ac_subdirs_all x86_64"
-ac_subdirs_all="$ac_subdirs_all xscale"
-ac_subdirs_all="$ac_subdirs_all xstormy16"
-ac_subdirs_all="$ac_subdirs_all z8k"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs HAVE_MACHINE_DIR_TRUE HAVE_MACHINE_DIR_FALSE LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+MAY_SUPPLY_SYSCALLS_TRUE
+MAY_SUPPLY_SYSCALLS_FALSE
+newlib_basedir
+build
+build_cpu
+build_vendor
+build_os
+host
+host_cpu
+host_vendor
+host_os
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+CC
+DEPDIR
+am__include
+am__quote
+AMDEP_TRUE
+AMDEP_FALSE
+AMDEPBACKSLASH
+CCDEPMODE
+am__fastdepCC_TRUE
+am__fastdepCC_FALSE
+AS
+AR
+RANLIB
+READELF
+MAINTAINER_MODE_TRUE
+MAINTAINER_MODE_FALSE
+MAINT
+CCAS
+CCASFLAGS
+NEWLIB_CFLAGS
+LDFLAGS
+ELIX_LEVEL_0_TRUE
+ELIX_LEVEL_0_FALSE
+ELIX_LEVEL_1_TRUE
+ELIX_LEVEL_1_FALSE
+ELIX_LEVEL_2_TRUE
+ELIX_LEVEL_2_FALSE
+ELIX_LEVEL_3_TRUE
+ELIX_LEVEL_3_FALSE
+ELIX_LEVEL_4_TRUE
+ELIX_LEVEL_4_FALSE
+USE_LIBTOOL_TRUE
+USE_LIBTOOL_FALSE
+OBJEXT
+oext
+aext
+lpfx
+libm_machine_dir
+machine_dir
+sys_dir
+SED
+DLLTOOL
+OBJDUMP
+LIBTOOL
+CFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+GREP
+EGREP
+FGREP
+LD
+DUMPBIN
+ac_ct_DUMPBIN
+NM
+LN_S
+lt_ECHO
+DSYMUTIL
+NMEDIT
+LIPO
+OTOOL
+OTOOL64
+CPP
+subdirs
+HAVE_MACHINE_DIR_TRUE
+HAVE_MACHINE_DIR_FALSE
+LIBOBJS
+LTLIBOBJS'
 ac_subst_files=''
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CCAS
+CCASFLAGS
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+ac_subdirs_all='a29k
+arm
+avr32
+bfin
+cris
+crx
+d10v
+d30v
+fr30
+frv
+h8300
+h8500
+hppa
+i386
+i960
+iq2000
+lm32
+m32c
+m32r
+m68hc11
+m68k
+m88k
+mep
+mips
+mn10200
+mn10300
+mt
+necv70
+powerpc
+sh
+sparc
+spu
+tic4x
+tic80
+v850
+w65
+x86_64
+xscale
+xstormy16
+z8k'
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -525,34 +977,48 @@
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -574,33 +1040,45 @@
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
     ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
     ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -627,6 +1105,12 @@
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -651,13 +1135,16 @@
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -722,6 +1209,16 @@
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -774,24 +1271,20 @@
   -with-* | --with-*)
     ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=\$ac_optarg ;;
 
   -without-* | --without-*)
     ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -822,8 +1315,7 @@
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
@@ -843,27 +1335,19 @@
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Be sure to have absolute directory names.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -890,82 +1374,76 @@
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { echo "$as_me: error: Working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$0" ||
 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$0" : 'X\(//\)[^/]' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CCAS_set=${CCAS+set}
-ac_env_CCAS_value=$CCAS
-ac_cv_env_CCAS_set=${CCAS+set}
-ac_cv_env_CCAS_value=$CCAS
-ac_env_CCASFLAGS_set=${CCASFLAGS+set}
-ac_env_CCASFLAGS_value=$CCASFLAGS
-ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set}
-ac_cv_env_CCASFLAGS_value=$CCASFLAGS
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+   { (exit 1); exit 1; }; }
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -994,9 +1472,6 @@
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
 			  [$ac_default_prefix]
@@ -1014,15 +1489,22 @@
   --bindir=DIR           user executables [EPREFIX/bin]
   --sbindir=DIR          system admin executables [EPREFIX/sbin]
   --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
   --libdir=DIR           object code libraries [EPREFIX/lib]
   --includedir=DIR       C header files [PREFIX/include]
   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR          info documentation [DATAROOTDIR/info]
+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR           man documentation [DATAROOTDIR/man]
+  --docdir=DIR           documentation root [DATAROOTDIR/doc/newlib]
+  --htmldir=DIR          html documentation [DOCDIR]
+  --dvidir=DIR           dvi documentation [DOCDIR]
+  --pdfdir=DIR           pdf documentation [DOCDIR]
+  --psdir=DIR            ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1059,10 +1541,8 @@
   --enable-dependency-tracking   do not reject slow dependency extractors
   --enable-maintainer-mode  enable make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer
-  --enable-shared[=PKGS]
-                          build shared libraries [default=yes]
-  --enable-static[=PKGS]
-                          build static libraries [default=yes]
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
@@ -1081,128 +1561,95 @@
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
 
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" || continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 newlib configure 1.17.0
-generated by GNU Autoconf 2.59
+generated by GNU Autoconf 2.61
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by newlib $as_me 1.17.0, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.61.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -1221,7 +1668,7 @@
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -1235,6 +1682,7 @@
   test -z "$as_dir" && as_dir=.
   echo "PATH: $as_dir"
 done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -1256,7 +1704,6 @@
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -1267,7 +1714,7 @@
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+    *\'*)
       ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
@@ -1289,9 +1736,7 @@
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      ac_configure_args="$ac_configure_args '$ac_arg'"
       ;;
     esac
   done
@@ -1302,8 +1747,8 @@
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1316,20 +1761,34 @@
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1340,22 +1799,28 @@
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1367,26 +1832,24 @@
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
   trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1417,14 +1880,17 @@
 
 # Let the site file select an alternate cache file if it wants to.
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+if test -n "$CONFIG_SITE"; then
+  set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+  set x "$ac_default_prefix/share/config.site" \
+	"$ac_default_prefix/etc/config.site"
 fi
-for ac_site_file in $CONFIG_SITE; do
+shift
+for ac_site_file
+do
   if test -r "$ac_site_file"; then
     { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
 echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1440,8 +1906,8 @@
     { echo "$as_me:$LINENO: loading cache $cache_file" >&5
 echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
@@ -1453,12 +1919,11 @@
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
       { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1483,8 +1948,7 @@
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1501,12 +1965,6 @@
    { (exit 1); exit 1; }; }
 fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
 
 
 
@@ -1531,67 +1989,92 @@
 
 
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
 
 ac_aux_dir=
-for ac_dir in ../../.. $srcdir/../../..; do
-  if test -f $ac_dir/install-sh; then
+for ac_dir in ../../.. "$srcdir"/../../..; do
+  if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
     break
-  elif test -f $ac_dir/install.sh; then
+  elif test -f "$ac_dir/install.sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
-  elif test -f $ac_dir/shtool; then
+  elif test -f "$ac_dir/shtool"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/shtool install -c"
     break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;}
    { (exit 1); exit 1; }; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 
 
 # Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
    { (exit 1); exit 1; }; }
 
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
 if test "${ac_cv_build+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
   { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
    { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+echo "$as_me: error: invalid value of canonical build" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
 build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
 am__api_version="1.9"
@@ -1608,8 +2091,8 @@
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1631,7 +2114,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1650,21 +2133,22 @@
     ;;
 esac
 done
+IFS=$as_save_IFS
 
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1674,8 +2158,8 @@
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
@@ -1717,20 +2201,20 @@
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
 # Double any \ or $.  echo might interpret backslashes.
 # By default was `s,x,x', remove it if useless.
 cat <<\_ACEOF >conftest.sed
 s/[\\$]/&&/g;s/;s,x,x,$//
 _ACEOF
 program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+rm -f conftest.sed
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -1782,8 +2266,8 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1796,54 +2280,57 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+  { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$AWK" && break
 done
 
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
 all:
-	@echo 'ac_maketemp="$(MAKE)"'
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
 rm -f conftest.make
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
   SET_MAKE=
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1858,7 +2345,7 @@
 
 DEPDIR="${am__leading_dot}deps"
 
-          ac_config_commands="$ac_config_commands depfiles"
+ac_config_commands="$ac_config_commands depfiles"
 
 
 am_make=${MAKE-make}
@@ -1868,8 +2355,8 @@
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
 am__include="#"
 am__quote=
 _am_result=none
@@ -1896,15 +2383,15 @@
 fi
 
 
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
+{ echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6; }
 rm -f confinc confmf
 
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+# Check whether --enable-dependency-tracking was given.
 if test "${enable_dependency_tracking+set}" = set; then
-  enableval="$enable_dependency_tracking"
+  enableval=$enable_dependency_tracking;
+fi
 
-fi;
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
@@ -1922,10 +2409,9 @@
 
 
 
-# Check whether --enable-multilib or --disable-multilib was given.
+# Check whether --enable-multilib was given.
 if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
+  enableval=$enable_multilib; case "${enableval}" in
   yes) multilib=yes ;;
   no)  multilib=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
@@ -1934,11 +2420,11 @@
  esac
 else
   multilib=yes
-fi;
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
+fi
+
+# Check whether --enable-target-optspace was given.
 if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
+  enableval=$enable_target_optspace; case "${enableval}" in
   yes) target_optspace=yes ;;
   no)  target_optspace=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
@@ -1947,11 +2433,11 @@
  esac
 else
   target_optspace=
-fi;
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
+fi
+
+# Check whether --enable-malloc-debugging was given.
 if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
+  enableval=$enable_malloc_debugging; case "${enableval}" in
   yes) malloc_debugging=yes ;;
   no)  malloc_debugging=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
@@ -1960,11 +2446,11 @@
  esac
 else
   malloc_debugging=
-fi;
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
+fi
+
+# Check whether --enable-newlib-multithread was given.
 if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
+  enableval=$enable_newlib_multithread; case "${enableval}" in
   yes) newlib_multithread=yes ;;
   no)  newlib_multithread=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
@@ -1973,11 +2459,11 @@
  esac
 else
   newlib_multithread=yes
-fi;
-# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given.
+fi
+
+# Check whether --enable-newlib-iconv was given.
 if test "${enable_newlib_iconv+set}" = set; then
-  enableval="$enable_newlib_iconv"
-  if test "${newlib_iconv+set}" != set; then
+  enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
    case "${enableval}" in
      yes) newlib_iconv=yes ;;
      no)  newlib_iconv=no ;;
@@ -1988,11 +2474,11 @@
  fi
 else
   newlib_iconv=${newlib_iconv}
-fi;
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
+fi
+
+# Check whether --enable-newlib-elix-level was given.
 if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
+  enableval=$enable_newlib_elix_level; case "${enableval}" in
   0)   newlib_elix_level=0 ;;
   1)   newlib_elix_level=1 ;;
   2)   newlib_elix_level=2 ;;
@@ -2004,11 +2490,11 @@
  esac
 else
   newlib_elix_level=0
-fi;
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
+fi
+
+# Check whether --enable-newlib-io-float was given.
 if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
+  enableval=$enable_newlib_io_float; case "${enableval}" in
   yes) newlib_io_float=yes ;;
   no)  newlib_io_float=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
@@ -2017,11 +2503,11 @@
  esac
 else
   newlib_io_float=yes
-fi;
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
+fi
+
+# Check whether --enable-newlib-supplied-syscalls was given.
 if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
+  enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
   yes) newlib_may_supply_syscalls=yes ;;
   no)  newlib_may_supply_syscalls=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
@@ -2030,7 +2516,8 @@
  esac
 else
   newlib_may_supply_syscalls=yes
-fi;
+fi
+
 
 
 if test x${newlib_may_supply_syscalls} = xyes; then
@@ -2056,26 +2543,41 @@
 fi
 
 
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
 if test "${ac_cv_host+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
    { (exit 1); exit 1; }; }
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+echo "$as_me: error: invalid value of canonical host" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
 host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
 
@@ -2128,8 +2630,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2142,32 +2644,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2180,27 +2684,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -2235,8 +2753,8 @@
 
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2249,30 +2767,32 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 
+
 depcc="$CC"   am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2361,8 +2881,8 @@
 fi
 
 fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
 
@@ -2381,8 +2901,8 @@
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2396,7 +2916,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -2407,6 +2927,7 @@
   fi
 done
 done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -2424,20 +2945,21 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
 echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
-echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
-echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
+echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2457,8 +2979,8 @@
   ac_cv_c_compiler_gnu=no
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
 
 if test $ac_cv_c_compiler_gnu = yes; then
   GCC=yes
@@ -2467,13 +2989,16 @@
   CFLAGS=
   ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2489,38 +3014,118 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -2552,8 +3157,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2566,32 +3171,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AS="${ac_tool_prefix}as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AS=$ac_cv_prog_AS
 if test -n "$AS"; then
-  echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6
+  { echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AS"; then
   ac_ct_AS=$AS
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2604,26 +3211,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AS="as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AS=$ac_cv_prog_ac_ct_AS
 if test -n "$ac_ct_AS"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-echo "${ECHO_T}$ac_ct_AS" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AS=$ac_ct_AS
+  if test "x$ac_ct_AS" = x; then
+    AS=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
 else
   AS="$ac_cv_prog_AS"
 fi
@@ -2631,8 +3253,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2645,32 +3267,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+  { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AR"; then
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2683,26 +3307,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AR=$ac_ct_AR
+  if test "x$ac_ct_AR" = x; then
+    AR=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
 else
   AR="$ac_cv_prog_AR"
 fi
@@ -2710,8 +3349,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2724,32 +3363,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2762,27 +3403,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  RANLIB=$ac_ct_RANLIB
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
 else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
@@ -2790,8 +3445,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args.
 set dummy ${ac_tool_prefix}readelf; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_READELF+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2804,32 +3459,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_READELF="${ac_tool_prefix}readelf"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 READELF=$ac_cv_prog_READELF
 if test -n "$READELF"; then
-  echo "$as_me:$LINENO: result: $READELF" >&5
-echo "${ECHO_T}$READELF" >&6
+  { echo "$as_me:$LINENO: result: $READELF" >&5
+echo "${ECHO_T}$READELF" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_READELF"; then
   ac_ct_READELF=$READELF
   # Extract the first word of "readelf", so it can be a program name with args.
 set dummy readelf; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2842,27 +3499,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_READELF="readelf"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":"
 fi
 fi
 ac_ct_READELF=$ac_cv_prog_ac_ct_READELF
 if test -n "$ac_ct_READELF"; then
-  echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
-echo "${ECHO_T}$ac_ct_READELF" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
+echo "${ECHO_T}$ac_ct_READELF" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  READELF=$ac_ct_READELF
+  if test "x$ac_ct_READELF" = x; then
+    READELF=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    READELF=$ac_ct_READELF
+  fi
 else
   READELF="$ac_cv_prog_READELF"
 fi
@@ -2881,8 +3552,8 @@
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -2904,7 +3575,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2923,21 +3594,22 @@
     ;;
 esac
 done
+IFS=$as_save_IFS
 
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -2951,17 +3623,17 @@
 # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13.  */
 ac_given_INSTALL=$INSTALL
 
-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+    # Check whether --enable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
   USE_MAINTAINER_MODE=no
-fi;
-  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+fi
+
+  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
 
 
 if test $USE_MAINTAINER_MODE = yes; then
@@ -3081,64 +3753,89 @@
 
 
 
-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
-if test "${lt_cv_path_SED+set}" = set; then
+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
+if test "${ac_cv_path_SED+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" | sed 99q >conftest.sed
+     $as_unset ac_script || ac_script=
+     # Extract the first word of "sed gsed" to use in msg output
+if test -z "$SED"; then
+set dummy sed gsed; ac_prog_name=$2
+if test "${ac_cv_path_SED+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
+  ac_path_SED_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
+  for ac_prog in sed gsed; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+    # Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_SED_found && break 3
   done
 done
 
+done
+IFS=$as_save_IFS
+
+
+fi
+
+SED="$ac_cv_path_SED"
+if test -z "$SED"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
-SED=$lt_cv_path_SED
+else
+  ac_cv_path_SED=$SED
+fi
 
-echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+echo "${ECHO_T}$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
 
 test -z "$SED" && SED=sed
 Xsed="$SED -e 1s/^X//"
@@ -3161,8 +3858,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3175,32 +3872,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AS="${ac_tool_prefix}as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AS=$ac_cv_prog_AS
 if test -n "$AS"; then
-  echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6
+  { echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AS"; then
   ac_ct_AS=$AS
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3213,27 +3912,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AS="as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false"
 fi
 fi
 ac_ct_AS=$ac_cv_prog_ac_ct_AS
 if test -n "$ac_ct_AS"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-echo "${ECHO_T}$ac_ct_AS" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AS=$ac_ct_AS
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
 else
   AS="$ac_cv_prog_AS"
 fi
@@ -3241,8 +3954,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_DLLTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3255,32 +3968,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 DLLTOOL=$ac_cv_prog_DLLTOOL
 if test -n "$DLLTOOL"; then
-  echo "$as_me:$LINENO: result: $DLLTOOL" >&5
-echo "${ECHO_T}$DLLTOOL" >&6
+  { echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_DLLTOOL"; then
   ac_ct_DLLTOOL=$DLLTOOL
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3293,27 +4008,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DLLTOOL="dlltool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false"
 fi
 fi
 ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
 if test -n "$ac_ct_DLLTOOL"; then
-  echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
-echo "${ECHO_T}$ac_ct_DLLTOOL" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
+echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  DLLTOOL=$ac_ct_DLLTOOL
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
 else
   DLLTOOL="$ac_cv_prog_DLLTOOL"
 fi
@@ -3321,8 +4050,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3335,32 +4064,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OBJDUMP=$ac_cv_prog_OBJDUMP
 if test -n "$OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-echo "${ECHO_T}$OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OBJDUMP"; then
   ac_ct_OBJDUMP=$OBJDUMP
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3373,27 +4104,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
 fi
 fi
 ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
 if test -n "$ac_ct_OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OBJDUMP=$ac_ct_OBJDUMP
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
 else
   OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
@@ -3454,8 +4199,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3468,32 +4213,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3506,36 +4253,51 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3548,98 +4310,59 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
+  fi
 fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
+if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
 else
+  ac_prog_rejected=no
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -3657,22 +4380,23 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
+  for ac_prog in cl.exe
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3685,36 +4409,38 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl
+  for ac_prog in cl.exe
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3727,29 +4453,45 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_CC" && break
 done
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 fi
 
 fi
@@ -3762,21 +4504,35 @@
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
+echo "$as_me:$LINENO: checking for C compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
@@ -3801,47 +4557,77 @@
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort.  b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions.  Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link_default") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
 	break;;
     *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
+        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
 	break;;
     * )
 	break;;
   esac
 done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
 else
+  ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
@@ -3853,19 +4639,21 @@
 fi
 
 ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
 
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -3884,22 +4672,27 @@
     fi
   fi
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 
 rm -f a.out a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
@@ -3910,9 +4703,8 @@
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
 	  break;;
     * ) break;;
   esac
@@ -3926,14 +4718,14 @@
 fi
 
 rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
 if test "${ac_cv_objext+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3953,14 +4745,20 @@
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
@@ -3978,12 +4776,12 @@
 
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4006,50 +4804,49 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_compiler_gnu=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_compiler_gnu=no
+	ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
 GCC=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4065,38 +4862,118 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
+
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -4112,12 +4989,12 @@
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_prog_cc_stdc=no
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -4151,12 +5028,17 @@
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
+   as 'x'.  The following induces an error, until -std is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
+   that's true only with -std.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -4171,205 +5053,57 @@
   return 0;
 }
 _ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_c89=$ac_arg
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
 CC=$ac_save_CC
 
 fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+  xno)
+    { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
   *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+    CC="$CC $ac_cv_prog_cc_c89"
+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
 esac
 
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -4378,8 +5112,8 @@
 
 depcc="$CC"   am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4461,58 +5195,273 @@
     fi
   done
 
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Extract the first word of "grep ggrep" to use in msg output
+if test -z "$GREP"; then
+set dummy grep ggrep; ac_prog_name=$2
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_GREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in grep ggrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+    # Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_GREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+GREP="$ac_cv_path_GREP"
+if test -z "$GREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     # Extract the first word of "egrep" to use in msg output
+if test -z "$EGREP"; then
+set dummy egrep; ac_prog_name=$2
+if test "${ac_cv_path_EGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_EGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in egrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+    # Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_EGREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+EGREP="$ac_cv_path_EGREP"
+if test -z "$EGREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+
+   fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ echo "$as_me:$LINENO: checking for fgrep" >&5
+echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     # Extract the first word of "fgrep" to use in msg output
+if test -z "$FGREP"; then
+set dummy fgrep; ac_prog_name=$2
+if test "${ac_cv_path_FGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_FGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in fgrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+    # Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
 
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+    $ac_path_FGREP_found && break 3
+  done
+done
 
+done
+IFS=$as_save_IFS
 
 
-if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
 fi
 
+FGREP="$ac_cv_path_FGREP"
+if test -z "$FGREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi
+  ac_cv_path_FGREP=$FGREP
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
 
 
-echo "$as_me:$LINENO: checking for fgrep" >&5
-echo $ECHO_N "checking for fgrep... $ECHO_C" >&6
-if test "${ac_cv_prog_fgrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1
-    then ac_cv_prog_fgrep='grep -F'
-    else ac_cv_prog_fgrep='fgrep'
-    fi
+   fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5
-echo "${ECHO_T}$ac_cv_prog_fgrep" >&6
- FGREP=$ac_cv_prog_fgrep
+{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
 
 
 test -z "$GREP" && GREP=grep
@@ -4535,18 +5484,18 @@
 
 
 
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
+# Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 else
   with_gnu_ld=no
-fi;
+fi
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -4575,11 +5524,11 @@
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
 else
-  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
 fi
 if test "${lt_cv_path_LD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -4612,17 +5561,17 @@
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
+  { echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4636,8 +5585,8 @@
   ;;
 esac
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
@@ -4648,8 +5597,8 @@
 
 
 
-echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
-echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; }
 if test "${lt_cv_path_NM+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4697,8 +5646,8 @@
   : ${lt_cv_path_NM=no}
 fi
 fi
-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6; }
 if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
@@ -4708,8 +5657,8 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_DUMPBIN+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4722,25 +5671,27 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 DUMPBIN=$ac_cv_prog_DUMPBIN
 if test -n "$DUMPBIN"; then
-  echo "$as_me:$LINENO: result: $DUMPBIN" >&5
-echo "${ECHO_T}$DUMPBIN" >&6
+  { echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+echo "${ECHO_T}$DUMPBIN" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$DUMPBIN" && break
   done
 fi
@@ -4750,8 +5701,8 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4764,30 +5715,45 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
 if test -n "$ac_ct_DUMPBIN"; then
-  echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
-echo "${ECHO_T}$ac_ct_DUMPBIN" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_DUMPBIN" && break
 done
-test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":"
 
-  DUMPBIN=$ac_ct_DUMPBIN
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
 fi
 
 
@@ -4802,43 +5768,43 @@
 
 
 
-echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
-echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; }
 if test "${lt_cv_nm_interface+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:4812: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:5778: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4815: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:5781: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4818: output\"" >&5)
+  (eval echo "\"\$as_me:5784: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
   fi
   rm -f conftest*
 fi
-echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
-echo "${ECHO_T}$lt_cv_nm_interface" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+echo "${ECHO_T}$lt_cv_nm_interface" >&6; }
 
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
 LN_S=$as_ln_s
 if test "$LN_S" = "ln -s"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 else
-  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
+  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6; }
 fi
 
 # find the maximum length of command line arguments
-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
 if test "${lt_cv_sys_max_cmd_len+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4957,11 +5923,11 @@
 fi
 
 if test -n $lt_cv_sys_max_cmd_len ; then
-  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
 else
-  echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
+  { echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6; }
 fi
 max_cmd_len=$lt_cv_sys_max_cmd_len
 
@@ -4974,8 +5940,8 @@
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 
-echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
-echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; }
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
@@ -4984,18 +5950,18 @@
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
-echo "$as_me:$LINENO: result: $xsi_shell" >&5
-echo "${ECHO_T}$xsi_shell" >&6
+{ echo "$as_me:$LINENO: result: $xsi_shell" >&5
+echo "${ECHO_T}$xsi_shell" >&6; }
 
 
-echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
-echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; }
 lt_shell_append=no
 ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
     >/dev/null 2>&1 \
   && lt_shell_append=yes
-echo "$as_me:$LINENO: result: $lt_shell_append" >&5
-echo "${ECHO_T}$lt_shell_append" >&6
+{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+echo "${ECHO_T}$lt_shell_append" >&6; }
 
 
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -5029,15 +5995,15 @@
 
 
 
-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
 if test "${lt_cv_ld_reload_flag+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_ld_reload_flag='-r'
 fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
 reload_flag=$lt_cv_ld_reload_flag
 case $reload_flag in
 "" | " "*) ;;
@@ -5065,8 +6031,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5079,32 +6045,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OBJDUMP=$ac_cv_prog_OBJDUMP
 if test -n "$OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-echo "${ECHO_T}$OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OBJDUMP"; then
   ac_ct_OBJDUMP=$OBJDUMP
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5117,27 +6085,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
 fi
 fi
 ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
 if test -n "$ac_ct_OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OBJDUMP=$ac_ct_OBJDUMP
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
 else
   OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
@@ -5149,8 +6131,8 @@
 
 
 
-echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
 if test "${lt_cv_deplibs_check_method+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5345,8 +6327,8 @@
 esac
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -5365,8 +6347,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5379,32 +6361,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+  { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AR"; then
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5417,27 +6401,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AR=$ac_ct_AR
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
 else
   AR="$ac_cv_prog_AR"
 fi
@@ -5458,8 +6456,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5472,32 +6470,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5510,27 +6510,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -5545,8 +6559,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5559,32 +6573,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5597,27 +6613,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  RANLIB=$ac_ct_RANLIB
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
 else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
@@ -5690,8 +6720,8 @@
 
 
 # Check for command to grab the raw symbol name followed by C symbol from nm.
-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
 if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5910,11 +6940,11 @@
   lt_cv_sys_global_symbol_to_cdecl=
 fi
 if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6
+  { echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6; }
 else
-  echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6
+  { echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6; }
 fi
 
 
@@ -5939,11 +6969,11 @@
 
 
 
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+# Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
+  enableval=$enable_libtool_lock;
+fi
 
-fi;
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -5970,7 +7000,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 5973 "configure"' > conftest.$ac_ext
+  echo '#line 7003 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6062,8 +7092,8 @@
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
 if test "${lt_cv_cc_needs_belf+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6089,35 +7119,32 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   lt_cv_cc_needs_belf=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-lt_cv_cc_needs_belf=no
+	lt_cv_cc_needs_belf=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -6126,8 +7153,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
@@ -6166,8 +7193,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6180,32 +7207,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 DSYMUTIL=$ac_cv_prog_DSYMUTIL
 if test -n "$DSYMUTIL"; then
-  echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-echo "${ECHO_T}$DSYMUTIL" >&6
+  { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+echo "${ECHO_T}$DSYMUTIL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_DSYMUTIL"; then
   ac_ct_DSYMUTIL=$DSYMUTIL
   # Extract the first word of "dsymutil", so it can be a program name with args.
 set dummy dsymutil; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6218,27 +7247,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":"
 fi
 fi
 ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
 if test -n "$ac_ct_DSYMUTIL"; then
-  echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  DSYMUTIL=$ac_ct_DSYMUTIL
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
 else
   DSYMUTIL="$ac_cv_prog_DSYMUTIL"
 fi
@@ -6246,8 +7289,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
 set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_NMEDIT+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6260,32 +7303,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 NMEDIT=$ac_cv_prog_NMEDIT
 if test -n "$NMEDIT"; then
-  echo "$as_me:$LINENO: result: $NMEDIT" >&5
-echo "${ECHO_T}$NMEDIT" >&6
+  { echo "$as_me:$LINENO: result: $NMEDIT" >&5
+echo "${ECHO_T}$NMEDIT" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_NMEDIT"; then
   ac_ct_NMEDIT=$NMEDIT
   # Extract the first word of "nmedit", so it can be a program name with args.
 set dummy nmedit; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6298,27 +7343,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_NMEDIT="nmedit"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":"
 fi
 fi
 ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
 if test -n "$ac_ct_NMEDIT"; then
-  echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-echo "${ECHO_T}$ac_ct_NMEDIT" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  NMEDIT=$ac_ct_NMEDIT
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
 else
   NMEDIT="$ac_cv_prog_NMEDIT"
 fi
@@ -6326,8 +7385,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
 set dummy ${ac_tool_prefix}lipo; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_LIPO+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6340,32 +7399,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 LIPO=$ac_cv_prog_LIPO
 if test -n "$LIPO"; then
-  echo "$as_me:$LINENO: result: $LIPO" >&5
-echo "${ECHO_T}$LIPO" >&6
+  { echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_LIPO"; then
   ac_ct_LIPO=$LIPO
   # Extract the first word of "lipo", so it can be a program name with args.
 set dummy lipo; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6378,27 +7439,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_LIPO="lipo"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":"
 fi
 fi
 ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
 if test -n "$ac_ct_LIPO"; then
-  echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
-echo "${ECHO_T}$ac_ct_LIPO" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
+echo "${ECHO_T}$ac_ct_LIPO" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  LIPO=$ac_ct_LIPO
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
 else
   LIPO="$ac_cv_prog_LIPO"
 fi
@@ -6406,8 +7481,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}otool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6420,32 +7495,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OTOOL=$ac_cv_prog_OTOOL
 if test -n "$OTOOL"; then
-  echo "$as_me:$LINENO: result: $OTOOL" >&5
-echo "${ECHO_T}$OTOOL" >&6
+  { echo "$as_me:$LINENO: result: $OTOOL" >&5
+echo "${ECHO_T}$OTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OTOOL"; then
   ac_ct_OTOOL=$OTOOL
   # Extract the first word of "otool", so it can be a program name with args.
 set dummy otool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6458,27 +7535,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OTOOL="otool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":"
 fi
 fi
 ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
 if test -n "$ac_ct_OTOOL"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
-echo "${ECHO_T}$ac_ct_OTOOL" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
+echo "${ECHO_T}$ac_ct_OTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OTOOL=$ac_ct_OTOOL
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
 else
   OTOOL="$ac_cv_prog_OTOOL"
 fi
@@ -6486,8 +7577,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
 set dummy ${ac_tool_prefix}otool64; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OTOOL64+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6500,32 +7591,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OTOOL64=$ac_cv_prog_OTOOL64
 if test -n "$OTOOL64"; then
-  echo "$as_me:$LINENO: result: $OTOOL64" >&5
-echo "${ECHO_T}$OTOOL64" >&6
+  { echo "$as_me:$LINENO: result: $OTOOL64" >&5
+echo "${ECHO_T}$OTOOL64" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OTOOL64"; then
   ac_ct_OTOOL64=$OTOOL64
   # Extract the first word of "otool64", so it can be a program name with args.
 set dummy otool64; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6538,27 +7631,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OTOOL64="otool64"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":"
 fi
 fi
 ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
 if test -n "$ac_ct_OTOOL64"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
-echo "${ECHO_T}$ac_ct_OTOOL64" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
+echo "${ECHO_T}$ac_ct_OTOOL64" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OTOOL64=$ac_ct_OTOOL64
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
 else
   OTOOL64="$ac_cv_prog_OTOOL64"
 fi
@@ -6589,8 +7696,8 @@
 
 
 
-    echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
 if test "${lt_cv_apple_cc_single_mod+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6616,10 +7723,10 @@
 	rm -f conftest.*
       fi
 fi
-echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6
-    echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
+    { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
 if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6643,41 +7750,38 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   lt_cv_ld_exported_symbols_list=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-lt_cv_ld_exported_symbols_list=no
+	lt_cv_ld_exported_symbols_list=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 	LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -6718,8 +7822,8 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -6753,24 +7857,22 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -6779,9 +7881,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -6791,24 +7894,22 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
@@ -6819,6 +7920,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -6836,8 +7938,8 @@
 else
   ac_cv_prog_CPP=$CPP
 fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
 do
@@ -6860,24 +7962,22 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -6886,9 +7986,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -6898,24 +7999,22 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
@@ -6926,6 +8025,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -6948,8 +8048,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
 if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6973,35 +8073,31 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_header_stdc=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_header_stdc=no
+	ac_cv_header_stdc=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
@@ -7057,6 +8153,7 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
+#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -7076,18 +8173,27 @@
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
+      return 2;
+  return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -7100,12 +8206,14 @@
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
+
+
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -7128,9 +8236,9 @@
 		  inttypes.h stdint.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -7144,38 +8252,35 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_Header=no"
+	eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -7190,9 +8295,9 @@
 for ac_header in dlfcn.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -7206,38 +8311,35 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_Header=no"
+	eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -7257,10 +8359,9 @@
 
 
 
-            # Check whether --enable-shared or --disable-shared was given.
+            # Check whether --enable-shared was given.
 if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
+  enableval=$enable_shared; p=${PACKAGE-default}
     case $enableval in
     yes) enable_shared=yes ;;
     no) enable_shared=no ;;
@@ -7279,7 +8380,8 @@
     esac
 else
   enable_shared=yes
-fi;
+fi
+
 
 
 
@@ -7288,10 +8390,9 @@
 
 
 
-  # Check whether --enable-static or --disable-static was given.
+  # Check whether --enable-static was given.
 if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
+  enableval=$enable_static; p=${PACKAGE-default}
     case $enableval in
     yes) enable_static=yes ;;
     no) enable_static=no ;;
@@ -7310,7 +8411,8 @@
     esac
 else
   enable_static=yes
-fi;
+fi
+
 
 
 
@@ -7320,13 +8422,13 @@
 
 
 
-# Check whether --with-pic or --without-pic was given.
+# Check whether --with-pic was given.
 if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
+  withval=$with_pic; pic_mode="$withval"
 else
   pic_mode=default
-fi;
+fi
+
 
 test -z "$pic_mode" && pic_mode=default
 
@@ -7336,10 +8438,9 @@
 
 
 
-  # Check whether --enable-fast-install or --disable-fast-install was given.
+  # Check whether --enable-fast-install was given.
 if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
+  enableval=$enable_fast_install; p=${PACKAGE-default}
     case $enableval in
     yes) enable_fast_install=yes ;;
     no) enable_fast_install=no ;;
@@ -7358,7 +8459,8 @@
     esac
 else
   enable_fast_install=yes
-fi;
+fi
+
 
 
 
@@ -7418,8 +8520,8 @@
    setopt NO_GLOB_SUBST
 fi
 
-echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
 if test "${lt_cv_objdir+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7433,8 +8535,8 @@
 fi
 rmdir .libs 2>/dev/null
 fi
-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6; }
 objdir=$lt_cv_objdir
 
 
@@ -7526,8 +8628,8 @@
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7579,11 +8681,11 @@
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 
@@ -7592,8 +8694,8 @@
 
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7645,11 +8747,11 @@
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 
@@ -7729,8 +8831,8 @@
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7747,11 +8849,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7750: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8852: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7754: \$? = $ac_status" >&5
+   echo "$as_me:8856: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7764,8 +8866,8 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
 if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
@@ -7784,8 +8886,8 @@
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -8056,8 +9158,8 @@
     lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
     ;;
 esac
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
 
 
 
@@ -8068,8 +9170,8 @@
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8086,11 +9188,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8089: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9191: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8093: \$? = $ac_status" >&5
+   echo "$as_me:9195: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8103,8 +9205,8 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
 
 if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
     case $lt_prog_compiler_pic in
@@ -8127,8 +9229,8 @@
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_static_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8155,8 +9257,8 @@
    LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
 
 if test x"$lt_cv_prog_compiler_static_works" = xyes; then
     :
@@ -8170,8 +9272,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8191,11 +9293,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8194: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9296: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8198: \$? = $ac_status" >&5
+   echo "$as_me:9300: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -8217,16 +9319,16 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
 
 
 
 
 
 
-  echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8246,11 +9348,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8249: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9351: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8253: \$? = $ac_status" >&5
+   echo "$as_me:9355: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -8272,8 +9374,8 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
 
 
 
@@ -8281,16 +9383,16 @@
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
   hard_links=yes
   $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
+  { echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6; }
   if test "$hard_links" = no; then
     { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
@@ -8305,8 +9407,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 
   runpath_var=
   allow_undefined_flag=
@@ -8763,27 +9865,23 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -8801,8 +9899,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -8832,27 +9932,23 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -8870,8 +9966,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -9088,35 +10186,33 @@
 int foo(void) {}
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
         LDFLAGS="$save_LDFLAGS"
       else
@@ -9373,8 +10469,8 @@
     fi
   fi
 
-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6
+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6; }
 test "$ld_shlibs" = no && can_build_shared=no
 
 with_gnu_ld=$with_gnu_ld
@@ -9410,46 +10506,52 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
+if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+	if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-	pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-        then
-	  archive_cmds_need_lc=no
-        else
-	  archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
+echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
       ;;
     esac
   fi
@@ -9612,8 +10714,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
 
 if test "$GCC" = yes; then
   case $host_os in
@@ -10029,12 +11131,17 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+
   # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-  cat >conftest.$ac_ext <<_ACEOF
+  if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -10050,40 +11157,42 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
-  shlibpath_overrides_runpath=yes
+  lt_cv_shlibpath_overrides_runpath=yes
 fi
 
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -10293,8 +11402,8 @@
   dynamic_linker=no
   ;;
 esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -10395,8 +11504,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" ||
    test -n "$runpath_var" ||
@@ -10420,8 +11529,8 @@
   # directories.
   hardcode_action=unsupported
 fi
-echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6
+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6; }
 
 if test "$hardcode_action" = relink ||
    test "$inherit_rpath" = yes; then
@@ -10465,8 +11574,8 @@
 
   darwin*)
   # if libdl is installed we need to link against it
-    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10479,56 +11588,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dl_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dl_dlopen=no
+	ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
 if test $ac_cv_lib_dl_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
@@ -10542,8 +11648,8 @@
     ;;
 
   *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
 if test "${ac_cv_func_shl_load+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10570,73 +11676,64 @@
 
 #undef shl_load
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char shl_load ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
+#if defined __stub_shl_load || defined __stub___shl_load
 choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != shl_load;
+return shl_load ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_shl_load=no
+	ac_cv_func_shl_load=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
 if test $ac_cv_func_shl_load = yes; then
   lt_cv_dlopen="shl_load"
 else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dld_shl_load+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10649,61 +11746,58 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char shl_load ();
 int
 main ()
 {
-shl_load ();
+return shl_load ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dld_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dld_shl_load=no
+	ac_cv_lib_dld_shl_load=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
 if test $ac_cv_lib_dld_shl_load = yes; then
   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
 if test "${ac_cv_func_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10730,73 +11824,64 @@
 
 #undef dlopen
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
+#if defined __stub_dlopen || defined __stub___dlopen
 choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != dlopen;
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_dlopen=no
+	ac_cv_func_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
 if test $ac_cv_func_dlopen = yes; then
   lt_cv_dlopen="dlopen"
 else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10809,61 +11894,58 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dl_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dl_dlopen=no
+	ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
 if test $ac_cv_lib_dl_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_svld_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10876,61 +11958,58 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_svld_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_svld_dlopen=no
+	ac_cv_lib_svld_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
 if test $ac_cv_lib_svld_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dld_dld_link+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10943,56 +12022,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dld_link ();
 int
 main ()
 {
-dld_link ();
+return dld_link ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dld_dld_link=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dld_dld_link=no
+	ac_cv_lib_dld_dld_link=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
 if test $ac_cv_lib_dld_dld_link = yes; then
   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
@@ -11032,8 +12108,8 @@
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
 if test "${lt_cv_dlopen_self+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -11043,7 +12119,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11046 "configure"
+#line 12122 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11123,13 +12199,13 @@
 
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
 if test "${lt_cv_dlopen_self_static+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -11139,7 +12215,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11142 "configure"
+#line 12218 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11219,8 +12295,8 @@
 
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
     fi
 
     CPPFLAGS="$save_CPPFLAGS"
@@ -11258,13 +12334,13 @@
 
 striplib=
 old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
 if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
@@ -11272,16 +12348,16 @@
     if test -n "$STRIP" ; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
-      echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+      { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
     else
-      echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+      { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
     fi
     ;;
   *)
-    echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+    { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
     ;;
   esac
 fi
@@ -11298,13 +12374,13 @@
 
 
   # Report which library types will actually be built
-  echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-  echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6
+  { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
+  { echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6; }
 
-  echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
   test "$can_build_shared" = "no" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
@@ -11324,15 +12400,15 @@
     fi
     ;;
   esac
-  echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6
+  { echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6; }
 
-  echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
   # Make sure either enable_shared or enable_static is yes.
   test "$enable_shared" = yes || enable_static=yes
-  echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6
+  { echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6; }
 
 
 
@@ -11358,7 +12434,7 @@
 
 
 
-                  ac_config_commands="$ac_config_commands libtool"
+        ac_config_commands="$ac_config_commands libtool"
 
 
 
@@ -11370,161 +12446,85 @@
 
 if test -n "${machine_dir}"; then
   case ${machine_dir} in
-	a29k)
-
-subdirs="$subdirs a29k"
+	a29k) subdirs="$subdirs a29k"
  ;;
-	arm)
-
-subdirs="$subdirs arm"
+	arm) subdirs="$subdirs arm"
  ;;
-	bfin)
-
-subdirs="$subdirs bfin"
+	avr32) subdirs="$subdirs avr32"
  ;;
-	cris)
-
-subdirs="$subdirs cris"
+	bfin) subdirs="$subdirs bfin"
  ;;
-	crx)
-
-subdirs="$subdirs crx"
+	cris) subdirs="$subdirs cris"
  ;;
-	d10v)
-
-subdirs="$subdirs d10v"
+	crx) subdirs="$subdirs crx"
  ;;
-	d30v)
-
-subdirs="$subdirs d30v"
+	d10v) subdirs="$subdirs d10v"
  ;;
-	fr30)
-
-subdirs="$subdirs fr30"
+	d30v) subdirs="$subdirs d30v"
  ;;
-	frv)
-
-subdirs="$subdirs frv"
+	fr30) subdirs="$subdirs fr30"
  ;;
-	h8300)
-
-subdirs="$subdirs h8300"
+	frv) subdirs="$subdirs frv"
  ;;
-	h8500)
-
-subdirs="$subdirs h8500"
+	h8300) subdirs="$subdirs h8300"
  ;;
-	hppa)
-
-subdirs="$subdirs hppa"
+	h8500) subdirs="$subdirs h8500"
  ;;
-	i386)
-
-subdirs="$subdirs i386"
+	hppa) subdirs="$subdirs hppa"
  ;;
-	i960)
-
-subdirs="$subdirs i960"
+	i386) subdirs="$subdirs i386"
  ;;
-	iq2000)
-
-subdirs="$subdirs iq2000"
+	i960) subdirs="$subdirs i960"
  ;;
-	lm32)
-
-subdirs="$subdirs lm32"
+	iq2000) subdirs="$subdirs iq2000"
  ;;
-	m32c)
-
-subdirs="$subdirs m32c"
+	lm32) subdirs="$subdirs lm32"
  ;;
-	m32r)
-
-subdirs="$subdirs m32r"
+	m32c) subdirs="$subdirs m32c"
  ;;
-	m68hc11)
-
-subdirs="$subdirs m68hc11"
+	m32r) subdirs="$subdirs m32r"
  ;;
-	m68k)
-
-subdirs="$subdirs m68k"
+	m68hc11) subdirs="$subdirs m68hc11"
  ;;
-	m88k)
-
-subdirs="$subdirs m88k"
+	m68k) subdirs="$subdirs m68k"
  ;;
-	mep )
-
-subdirs="$subdirs mep"
+	m88k) subdirs="$subdirs m88k"
  ;;
-	mips)
-
-subdirs="$subdirs mips"
+	mep ) subdirs="$subdirs mep"
  ;;
-	mn10200)
-
-subdirs="$subdirs mn10200"
+	mips) subdirs="$subdirs mips"
  ;;
-	mn10300)
-
-subdirs="$subdirs mn10300"
+	mn10200) subdirs="$subdirs mn10200"
  ;;
-	mt)
-
-subdirs="$subdirs mt"
+	mn10300) subdirs="$subdirs mn10300"
  ;;
-	necv70)
-
-subdirs="$subdirs necv70"
+	mt) subdirs="$subdirs mt"
  ;;
-	powerpc)
-
-subdirs="$subdirs powerpc"
+	necv70) subdirs="$subdirs necv70"
  ;;
-	sh)
-
-subdirs="$subdirs sh"
+	powerpc) subdirs="$subdirs powerpc"
  ;;
-	sparc)
-
-subdirs="$subdirs sparc"
+	sh) subdirs="$subdirs sh"
  ;;
-	spu)
-
-subdirs="$subdirs spu"
+	sparc) subdirs="$subdirs sparc"
  ;;
-	tic4x)
-
-subdirs="$subdirs tic4x"
+	spu) subdirs="$subdirs spu"
  ;;
-	tic80)
-
-subdirs="$subdirs tic80"
+	tic4x) subdirs="$subdirs tic4x"
  ;;
-	v850)
-
-subdirs="$subdirs v850"
+	tic80) subdirs="$subdirs tic80"
  ;;
-	w65)
-
-subdirs="$subdirs w65"
+	v850) subdirs="$subdirs v850"
  ;;
-	x86_64)
-
-subdirs="$subdirs x86_64"
+	w65) subdirs="$subdirs w65"
  ;;
-	xscale)
-
-subdirs="$subdirs xscale"
+	x86_64) subdirs="$subdirs x86_64"
  ;;
-	xstormy16)
-
-subdirs="$subdirs xstormy16"
+	xscale) subdirs="$subdirs xscale"
  ;;
-	z8k)
-
-subdirs="$subdirs z8k"
+	xstormy16) subdirs="$subdirs xstormy16"
+ ;;
+	z8k) subdirs="$subdirs z8k"
  ;;
   esac;
 fi
@@ -11540,7 +12540,7 @@
 fi
 
 
-          ac_config_files="$ac_config_files Makefile"
+ac_config_files="$ac_config_files Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -11560,39 +12560,58 @@
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       # `set' does not quote correctly, so add quotes (double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \).
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -11601,63 +12620,48 @@
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
 #
 # If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
+# take arguments), then branch to the quote section.  Otherwise,
 # look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
+ac_script='
 t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\),-D\1=\2,g
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\),-D\1=\2,g
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-d
-: quote
-s,[	 `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
 
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -11772,17 +12776,45 @@
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -11792,8 +12824,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -11807,18 +12874,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -11826,159 +12894,120 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
 
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -11987,7 +13016,28 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -11996,31 +13046,14 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
 
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
 This file was extended by newlib $as_me 1.17.0, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.61.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -12028,30 +13061,19 @@
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
+cat >>$CONFIG_STATUS <<_ACEOF
 # Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
 
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+_ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
-
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
@@ -12059,7 +13081,7 @@
 Usage: $0 [OPTIONS] [FILE]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
+  -V, --version    print version number and configuration settings, then exit
   -q, --quiet      do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
@@ -12073,19 +13095,21 @@
 $config_commands
 
 Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
 newlib config.status 1.17.0
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.61,
+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -12096,60 +13120,42 @@
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
     CONFIG_FILES="$CONFIG_FILES $ac_optarg"
     ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+  -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -12165,17 +13171,28 @@
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  CONFIG_SHELL=$SHELL
+  export CONFIG_SHELL
+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  echo "$ac_log"
+} >&5
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 #
-# INIT-COMMANDS section.
+# INIT-COMMANDS
 #
-
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 
@@ -12436,22 +13453,23 @@
 
 _ACEOF
 
-
-
 cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -12462,396 +13480,492 @@
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
   trap '{ (exit 1); exit 1; }' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
 } ||
 {
    echo "$me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
 #
-# CONFIG_FILES section.
+# Set up the sed scripts for CONFIG_FILES section.
 #
 
 # No need to generate the scripts if there are no CONFIG_FILES.
 # This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t
-s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t
-s,@newlib_basedir@,$newlib_basedir,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@CC@,$CC,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@AS@,$AS,;t t
-s,@ac_ct_AS@,$ac_ct_AS,;t t
-s,@AR@,$AR,;t t
-s,@ac_ct_AR@,$ac_ct_AR,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@READELF@,$READELF,;t t
-s,@ac_ct_READELF@,$ac_ct_READELF,;t t
-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-s,@MAINT@,$MAINT,;t t
-s,@CCAS@,$CCAS,;t t
-s,@CCASFLAGS@,$CCASFLAGS,;t t
-s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t
-s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t
-s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t
-s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t
-s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t
-s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t
-s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t
-s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t
-s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t
-s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t
-s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t
-s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@oext@,$oext,;t t
-s,@aext@,$aext,;t t
-s,@lpfx@,$lpfx,;t t
-s,@libm_machine_dir@,$libm_machine_dir,;t t
-s,@machine_dir@,$machine_dir,;t t
-s,@sys_dir@,$sys_dir,;t t
-s,@SED@,$SED,;t t
-s,@DLLTOOL@,$DLLTOOL,;t t
-s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t
-s,@OBJDUMP@,$OBJDUMP,;t t
-s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t
-s,@LIBTOOL@,$LIBTOOL,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@EGREP@,$EGREP,;t t
-s,@FGREP@,$FGREP,;t t
-s,@GREP@,$GREP,;t t
-s,@LD@,$LD,;t t
-s,@DUMPBIN@,$DUMPBIN,;t t
-s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t
-s,@NM@,$NM,;t t
-s,@LN_S@,$LN_S,;t t
-s,@lt_ECHO@,$lt_ECHO,;t t
-s,@DSYMUTIL@,$DSYMUTIL,;t t
-s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t
-s,@NMEDIT@,$NMEDIT,;t t
-s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t
-s,@LIPO@,$LIPO,;t t
-s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t
-s,@OTOOL@,$OTOOL,;t t
-s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t
-s,@OTOOL64@,$OTOOL64,;t t
-s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t
-s,@CPP@,$CPP,;t t
-s,@subdirs@,$subdirs,;t t
-s,@HAVE_MACHINE_DIR_TRUE@,$HAVE_MACHINE_DIR_TRUE,;t t
-s,@HAVE_MACHINE_DIR_FALSE@,$HAVE_MACHINE_DIR_FALSE,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
+newlib_basedir!$newlib_basedir$ac_delim
+build!$build$ac_delim
+build_cpu!$build_cpu$ac_delim
+build_vendor!$build_vendor$ac_delim
+build_os!$build_os$ac_delim
+host!$host$ac_delim
+host_cpu!$host_cpu$ac_delim
+host_vendor!$host_vendor$ac_delim
+host_os!$host_os$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+CC!$CC$ac_delim
+DEPDIR!$DEPDIR$ac_delim
+am__include!$am__include$ac_delim
+am__quote!$am__quote$ac_delim
+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
+CCDEPMODE!$CCDEPMODE$ac_delim
+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
+AS!$AS$ac_delim
+AR!$AR$ac_delim
+RANLIB!$RANLIB$ac_delim
+READELF!$READELF$ac_delim
+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
+MAINT!$MAINT$ac_delim
+CCAS!$CCAS$ac_delim
+CCASFLAGS!$CCASFLAGS$ac_delim
+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
-fi # test -n "$CONFIG_FILES"
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+CEOF$ac_eof
+_ACEOF
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+oext!$oext$ac_delim
+aext!$aext$ac_delim
+lpfx!$lpfx$ac_delim
+libm_machine_dir!$libm_machine_dir$ac_delim
+machine_dir!$machine_dir$ac_delim
+sys_dir!$sys_dir$ac_delim
+SED!$SED$ac_delim
+DLLTOOL!$DLLTOOL$ac_delim
+OBJDUMP!$OBJDUMP$ac_delim
+LIBTOOL!$LIBTOOL$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+GREP!$GREP$ac_delim
+EGREP!$EGREP$ac_delim
+FGREP!$FGREP$ac_delim
+LD!$LD$ac_delim
+DUMPBIN!$DUMPBIN$ac_delim
+ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim
+NM!$NM$ac_delim
+LN_S!$LN_S$ac_delim
+lt_ECHO!$lt_ECHO$ac_delim
+DSYMUTIL!$DSYMUTIL$ac_delim
+NMEDIT!$NMEDIT$ac_delim
+LIPO!$LIPO$ac_delim
+OTOOL!$OTOOL$ac_delim
+OTOOL64!$OTOOL64$ac_delim
+CPP!$CPP$ac_delim
+subdirs!$subdirs$ac_delim
+HAVE_MACHINE_DIR_TRUE!$HAVE_MACHINE_DIR_TRUE$ac_delim
+HAVE_MACHINE_DIR_FALSE!$HAVE_MACHINE_DIR_FALSE$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 40; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
 
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
 _ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
 cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in  :F $CONFIG_FILES      :C $CONFIG_COMMANDS
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      ac_file_inputs="$ac_file_inputs $ac_f"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input="Generated from "`IFS=:
+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    fi
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin";;
+    esac
+    ;;
   esac
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
   ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+_ACEOF
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
 _ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
 cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub
 $extrasub
@@ -12859,142 +13973,43 @@
 cat >>$CONFIG_STATUS <<\_ACEOF
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
 
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out"; rm -f "$tmp/out";;
+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+  esac
+ ;;
 
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
+  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
 
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -13004,18 +14019,29 @@
   # each Makefile.in and add a new line on top of each file to say so.
   # So let's grep whole file.
   if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
+    dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   else
     continue
   fi
@@ -13037,49 +14063,76 @@
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
+    fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { as_dir=$dirpart/$fdir
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
     # echo "creating $dirpart/$file"
     echo '# dummy' > "$dirpart/$file"
   done
 done
  ;;
-    libtool )
+    "libtool":C)
 
     # See if we are running on zsh, and set the options which allow our
     # commands through without removal of \ escapes.
@@ -13720,11 +14773,10 @@
   chmod +x "$ofile"
 
  ;;
+
   esac
-done
-_ACEOF
+done # for ac_tag
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
 { (exit 0); exit 0; }
 _ACEOF
@@ -13754,7 +14806,7 @@
 fi
 
 #
-# CONFIG_SUBDIRS section, as fixed in confsubdir.m4.
+# CONFIG_SUBDIRS section.
 #
 if test "$no_recursion" != yes; then
 
@@ -13801,7 +14853,12 @@
   case $ac_arg in
   *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
   esac
-  ac_sub_configure_args="$ac_arg $ac_sub_configure_args"
+  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
+
+  # Pass --silent
+  if test "$silent" = yes; then
+    ac_sub_configure_args="--silent $ac_sub_configure_args"
+  fi
 
   ac_popdir=`pwd`
   for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
@@ -13810,97 +14867,83 @@
     # parts of a large source tree are present.
     test -d "$srcdir/$ac_dir" || continue
 
-    { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
-echo "$as_me: configuring in $ac_dir" >&6;}
-    { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
+    ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
+    echo "$as_me:$LINENO: $ac_msg" >&5
+    echo "$ac_msg" >&6
+    { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
     ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
 
     cd "$ac_dir"
@@ -13924,8 +14967,8 @@
       # Make the cache file name correct relative to the subdirectory.
       case $cache_file in
       [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-	ac_sub_cache_file=$ac_top_builddir$cache_file ;;
+      *) # Relative name.
+	ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
       esac
 
       { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
diff -Naur newlib-1.17.0/newlib/libc/machine/configure.in newlib-1.17.0-new/newlib/libc/machine/configure.in
--- newlib-1.17.0/newlib/libc/machine/configure.in	2008-12-11 21:05:38.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/machine/configure.in	2009-05-22 09:57:50.000000000 +0200
@@ -24,6 +24,7 @@
   case ${machine_dir} in
 	a29k) AC_CONFIG_SUBDIRS(a29k) ;;
 	arm) AC_CONFIG_SUBDIRS(arm) ;;
+	avr32) AC_CONFIG_SUBDIRS(avr32) ;;
 	bfin) AC_CONFIG_SUBDIRS(bfin) ;;
 	cris) AC_CONFIG_SUBDIRS(cris) ;;
 	crx) AC_CONFIG_SUBDIRS(crx) ;;
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4
--- newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,366 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4-p6
+
+dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+dnl This provides configure definitions used by all the newlib
+dnl configure.in files.
+
+dnl Basic newlib configury.  This calls basic introductory stuff,
+dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
+dnl configure.host.  The only argument is the relative path to the top
+dnl newlib directory.
+
+AC_DEFUN(NEWLIB_CONFIGURE,
+[
+dnl Default to --enable-multilib
+AC_ARG_ENABLE(multilib,
+[  --enable-multilib         build many library versions (default)],
+[case "${enableval}" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
+ esac], [multilib=yes])dnl
+
+dnl Support --enable-target-optspace
+AC_ARG_ENABLE(target-optspace,
+[  --enable-target-optspace  optimize for space],
+[case "${enableval}" in
+  yes) target_optspace=yes ;;
+  no)  target_optspace=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
+ esac], [target_optspace=])dnl
+
+dnl Support --enable-malloc-debugging - currently only supported for Cygwin
+AC_ARG_ENABLE(malloc-debugging,
+[  --enable-malloc-debugging indicate malloc debugging requested],
+[case "${enableval}" in
+  yes) malloc_debugging=yes ;;
+  no)  malloc_debugging=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
+ esac], [malloc_debugging=])dnl
+
+dnl Support --enable-newlib-multithread
+AC_ARG_ENABLE(newlib-multithread,
+[  --enable-newlib-multithread        enable support for multiple threads],
+[case "${enableval}" in
+  yes) newlib_multithread=yes ;;
+  no)  newlib_multithread=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
+ esac], [newlib_multithread=yes])dnl
+
+dnl Support --enable-newlib-iconv
+AC_ARG_ENABLE(newlib-iconv,
+[  --enable-newlib-iconv     enable iconv library support],
+[if test "${newlib_iconv+set}" != set; then
+   case "${enableval}" in
+     yes) newlib_iconv=yes ;;
+     no)  newlib_iconv=no ;;
+     *)   AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;;
+   esac
+ fi], [newlib_iconv=${newlib_iconv}])dnl
+
+dnl Support --enable-newlib-elix-level
+AC_ARG_ENABLE(newlib-elix-level,
+[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
+[case "${enableval}" in
+  0)   newlib_elix_level=0 ;;
+  1)   newlib_elix_level=1 ;;
+  2)   newlib_elix_level=2 ;;
+  3)   newlib_elix_level=3 ;;
+  4)   newlib_elix_level=4 ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
+ esac], [newlib_elix_level=0])dnl
+
+dnl Support --disable-newlib-io-float
+AC_ARG_ENABLE(newlib-io-float,
+[  --disable-newlib-io-float disable printf/scanf family float support],
+[case "${enableval}" in
+  yes) newlib_io_float=yes ;;
+  no)  newlib_io_float=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
+ esac], [newlib_io_float=yes])dnl
+
+dnl Support --disable-newlib-supplied-syscalls
+AC_ARG_ENABLE(newlib-supplied-syscalls,
+[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
+[case "${enableval}" in
+  yes) newlib_may_supply_syscalls=yes ;;
+  no)  newlib_may_supply_syscalls=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
+ esac], [newlib_may_supply_syscalls=yes])dnl
+
+AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
+
+dnl We may get other options which we don't document:
+dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
+
+test -z "[$]{with_target_subdir}" && with_target_subdir=.
+
+if test "[$]{srcdir}" = "."; then
+  if test "[$]{with_target_subdir}" != "."; then
+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
+  else
+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
+  fi
+else
+  newlib_basedir="[$]{srcdir}/$1"
+fi
+AC_SUBST(newlib_basedir)
+
+AC_CANONICAL_SYSTEM
+
+AM_INIT_AUTOMAKE(newlib, 1.14.0.atmel.1.0.1)
+
+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable.  This should really be fixed in autoconf
+# itself.
+
+AC_DEFUN(LIB_AC_PROG_CC,
+[AC_BEFORE([$0], [AC_PROG_CPP])dnl
+AC_CHECK_PROG(CC, gcc, gcc)
+if test -z "$CC"; then
+  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
+  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+fi
+
+AC_PROG_CC_GNU
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+dnl Check whether -g works, even if CFLAGS is set, in case the package
+dnl plays around with CFLAGS (such as to build both debugging and
+dnl normal versions of a library), tasteless as that idea is.
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  AC_PROG_CC_G
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+])
+
+LIB_AC_PROG_CC
+
+AC_CHECK_TOOL(AS, as)
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+
+AC_PROG_INSTALL
+
+AM_MAINTAINER_MODE
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables.  So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+  AC_EXEEXT
+fi
+
+. [$]{newlib_basedir}/configure.host
+
+newlib_cflags="[$]{newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+AC_SUBST(NEWLIB_CFLAGS)
+
+LDFLAGS=${ldflags}
+AC_SUBST(LDFLAGS)
+
+AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
+AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
+AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
+AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
+AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
+
+AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
+
+# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
+# use oext, which is set in configure.host based on the target platform.
+OBJEXT=${oext}
+
+AC_SUBST(OBJEXT)
+AC_SUBST(oext)
+AC_SUBST(aext)
+
+AC_SUBST(libm_machine_dir)
+AC_SUBST(machine_dir)
+AC_SUBST(sys_dir)
+])
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+# Copyright 2002  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+	 [AM_AUTOMAKE_VERSION([1.4-p6])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "[$]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "[$]2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN([AM_MISSING_PROG],
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+   $1=$2
+   AC_MSG_RESULT(found)
+else
+   $1="$3/missing $2"
+   AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Define a conditional.
+
+AC_DEFUN([AM_CONDITIONAL],
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
+  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST(MAINT)dnl
+]
+)
+
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h
--- newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1 @@
+
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure newlib-1.17.0-new/newlib/libc/sys/avr32/configure
--- newlib-1.17.0/newlib/libc/sys/avr32/configure	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,3922 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+
+  if test $as_have_required = yes && 	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  case $as_dir in
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
+        export CONFIG_SHELL
+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell autoconf@gnu.org about your system,
+  echo including any error possibly output before this
+  echo message
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+    as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME='newlib'
+PACKAGE_TARNAME='newlib'
+PACKAGE_VERSION='NEWLIB_VERSION'
+PACKAGE_STRING='newlib NEWLIB_VERSION'
+PACKAGE_BUGREPORT=''
+
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+MAY_SUPPLY_SYSCALLS_TRUE
+MAY_SUPPLY_SYSCALLS_FALSE
+newlib_basedir
+build
+build_cpu
+build_vendor
+build_os
+host
+host_cpu
+host_vendor
+host_os
+target
+target_cpu
+target_vendor
+target_os
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+SET_MAKE
+CC
+AS
+AR
+RANLIB
+MAINTAINER_MODE_TRUE
+MAINTAINER_MODE_FALSE
+MAINT
+NEWLIB_CFLAGS
+LDFLAGS
+ELIX_LEVEL_0_TRUE
+ELIX_LEVEL_0_FALSE
+ELIX_LEVEL_1_TRUE
+ELIX_LEVEL_1_FALSE
+ELIX_LEVEL_2_TRUE
+ELIX_LEVEL_2_FALSE
+ELIX_LEVEL_3_TRUE
+ELIX_LEVEL_3_FALSE
+ELIX_LEVEL_4_TRUE
+ELIX_LEVEL_4_FALSE
+USE_LIBTOOL_TRUE
+USE_LIBTOOL_FALSE
+OBJEXT
+oext
+aext
+libm_machine_dir
+machine_dir
+sys_dir
+LIBOBJS
+LTLIBOBJS'
+ac_subst_files=''
+      ac_precious_vars='build_alias
+host_alias
+target_alias'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute directory names.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { echo "$as_me: error: Working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$0" ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$0" : 'X\(//\)[^/]' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$0" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+   { (exit 1); exit 1; }; }
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+			  [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+			  [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR          info documentation [DATAROOTDIR/info]
+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR           man documentation [DATAROOTDIR/man]
+  --docdir=DIR           documentation root [DATAROOTDIR/doc/newlib]
+  --htmldir=DIR          html documentation [DOCDIR]
+  --dvidir=DIR           dvi documentation [DOCDIR]
+  --pdfdir=DIR           pdf documentation [DOCDIR]
+  --psdir=DIR            ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-multilib         build many library versions (default)
+  --enable-target-optspace  optimize for space
+  --enable-malloc-debugging indicate malloc debugging requested
+  --enable-newlib-multithread        enable support for multiple threads
+  --enable-newlib-iconv     enable iconv library support
+  --enable-newlib-elix-level         supply desired elix library level (1-4)
+  --disable-newlib-io-float disable printf/scanf family float support
+  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer
+
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" || continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+newlib configure NEWLIB_VERSION
+generated by GNU Autoconf 2.61
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by newlib $as_me NEWLIB_VERSION, which was
+generated by GNU Autoconf 2.61.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      ac_configure_args="$ac_configure_args '$ac_arg'"
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      echo "$as_me: caught signal $ac_signal"
+    echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -n "$CONFIG_SITE"; then
+  set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+  set x "$ac_default_prefix/share/config.site" \
+	"$ac_default_prefix/etc/config.site"
+fi
+shift
+for ac_site_file
+do
+  if test -r "$ac_site_file"; then
+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+	ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../../.. "$srcdir"/../../../..; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+{ echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+echo "$as_me: error: invalid value of canonical build" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+echo "$as_me: error: invalid value of canonical host" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+am__api_version="1.4"
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "$*" != "X $srcdir/configure conftestfile" \
+      && test "$*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+rm -f conftest*
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm -f conftest.sed
+
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+  SET_MAKE=
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+# Check whether --enable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+  enableval=$enable_multilib; case "${enableval}" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
+echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  multilib=yes
+fi
+
+# Check whether --enable-target-optspace was given.
+if test "${enable_target_optspace+set}" = set; then
+  enableval=$enable_target_optspace; case "${enableval}" in
+  yes) target_optspace=yes ;;
+  no)  target_optspace=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
+echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  target_optspace=
+fi
+
+# Check whether --enable-malloc-debugging was given.
+if test "${enable_malloc_debugging+set}" = set; then
+  enableval=$enable_malloc_debugging; case "${enableval}" in
+  yes) malloc_debugging=yes ;;
+  no)  malloc_debugging=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
+echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  malloc_debugging=
+fi
+
+# Check whether --enable-newlib-multithread was given.
+if test "${enable_newlib_multithread+set}" = set; then
+  enableval=$enable_newlib_multithread; case "${enableval}" in
+  yes) newlib_multithread=yes ;;
+  no)  newlib_multithread=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_multithread=yes
+fi
+
+# Check whether --enable-newlib-iconv was given.
+if test "${enable_newlib_iconv+set}" = set; then
+  enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
+   case "${enableval}" in
+     yes) newlib_iconv=yes ;;
+     no)  newlib_iconv=no ;;
+     *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+   esac
+ fi
+else
+  newlib_iconv=${newlib_iconv}
+fi
+
+# Check whether --enable-newlib-elix-level was given.
+if test "${enable_newlib_elix_level+set}" = set; then
+  enableval=$enable_newlib_elix_level; case "${enableval}" in
+  0)   newlib_elix_level=0 ;;
+  1)   newlib_elix_level=1 ;;
+  2)   newlib_elix_level=2 ;;
+  3)   newlib_elix_level=3 ;;
+  4)   newlib_elix_level=4 ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_elix_level=0
+fi
+
+# Check whether --enable-newlib-io-float was given.
+if test "${enable_newlib_io_float+set}" = set; then
+  enableval=$enable_newlib_io_float; case "${enableval}" in
+  yes) newlib_io_float=yes ;;
+  no)  newlib_io_float=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_io_float=yes
+fi
+
+# Check whether --enable-newlib-supplied-syscalls was given.
+if test "${enable_newlib_supplied_syscalls+set}" = set; then
+  enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
+  yes) newlib_may_supply_syscalls=yes ;;
+  no)  newlib_may_supply_syscalls=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
+echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  newlib_may_supply_syscalls=yes
+fi
+
+
+
+if test x${newlib_may_supply_syscalls} = xyes; then
+  MAY_SUPPLY_SYSCALLS_TRUE=
+  MAY_SUPPLY_SYSCALLS_FALSE='#'
+else
+  MAY_SUPPLY_SYSCALLS_TRUE='#'
+  MAY_SUPPLY_SYSCALLS_FALSE=
+fi
+
+
+test -z "${with_target_subdir}" && with_target_subdir=.
+
+if test "${srcdir}" = "."; then
+  if test "${with_target_subdir}" != "."; then
+    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
+  else
+    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
+  fi
+else
+  newlib_basedir="${srcdir}/../../.."
+fi
+
+
+{ echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
+if test "${ac_cv_target+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
+else
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
+echo "$as_me: error: invalid value of canonical target" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+PACKAGE=newlib
+
+VERSION=1.14.0.atmel.1.0.1
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal-${am__api_version}
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working autoconf" >&5
+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake-${am__api_version}
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working autoheader" >&5
+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+{ echo "$as_me:$LINENO: checking for working makeinfo" >&5
+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; }
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   { echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6; }
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   { echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6; }
+fi
+
+
+
+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable.  This should really be fixed in autoconf
+# itself.
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+  test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
+echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+#AC_PROG_CC_GNU
+
+if test $ac_cv_c_compiler_gnu = yes; then
+  GCC=yes
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+#  AC_PROG_CC_G
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_AR" = x; then
+    AR=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+    # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+  MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables.  So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+#if false; then
+#
+#fi
+
+. ${newlib_basedir}/configure.host
+
+newlib_cflags="${newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+
+
+LDFLAGS=${ldflags}
+
+
+
+
+if test x${newlib_elix_level} = x0; then
+  ELIX_LEVEL_0_TRUE=
+  ELIX_LEVEL_0_FALSE='#'
+else
+  ELIX_LEVEL_0_TRUE='#'
+  ELIX_LEVEL_0_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x1; then
+  ELIX_LEVEL_1_TRUE=
+  ELIX_LEVEL_1_FALSE='#'
+else
+  ELIX_LEVEL_1_TRUE='#'
+  ELIX_LEVEL_1_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x2; then
+  ELIX_LEVEL_2_TRUE=
+  ELIX_LEVEL_2_FALSE='#'
+else
+  ELIX_LEVEL_2_TRUE='#'
+  ELIX_LEVEL_2_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x3; then
+  ELIX_LEVEL_3_TRUE=
+  ELIX_LEVEL_3_FALSE='#'
+else
+  ELIX_LEVEL_3_TRUE='#'
+  ELIX_LEVEL_3_FALSE=
+fi
+
+
+if test x${newlib_elix_level} = x4; then
+  ELIX_LEVEL_4_TRUE=
+  ELIX_LEVEL_4_FALSE='#'
+else
+  ELIX_LEVEL_4_TRUE='#'
+  ELIX_LEVEL_4_FALSE=
+fi
+
+
+
+if test x${use_libtool} = xyes; then
+  USE_LIBTOOL_TRUE=
+  USE_LIBTOOL_FALSE='#'
+else
+  USE_LIBTOOL_TRUE='#'
+  USE_LIBTOOL_FALSE=
+fi
+
+# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
+# use oext, which is set in configure.host based on the target platform.
+OBJEXT=${oext}
+
+
+
+
+
+
+
+
+
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
+    cat confcache >$cache_file
+  else
+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+    as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by newlib $as_me NEWLIB_VERSION, which was
+generated by GNU Autoconf 2.61.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+newlib config.status NEWLIB_VERSION
+configured by $0, generated by GNU Autoconf 2.61,
+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  CONFIG_SHELL=$SHELL
+  export CONFIG_SHELL
+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
+newlib_basedir!$newlib_basedir$ac_delim
+build!$build$ac_delim
+build_cpu!$build_cpu$ac_delim
+build_vendor!$build_vendor$ac_delim
+build_os!$build_os$ac_delim
+host!$host$ac_delim
+host_cpu!$host_cpu$ac_delim
+host_vendor!$host_vendor$ac_delim
+host_os!$host_os$ac_delim
+target!$target$ac_delim
+target_cpu!$target_cpu$ac_delim
+target_vendor!$target_vendor$ac_delim
+target_os!$target_os$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+CC!$CC$ac_delim
+AS!$AS$ac_delim
+AR!$AR$ac_delim
+RANLIB!$RANLIB$ac_delim
+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
+MAINT!$MAINT$ac_delim
+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+oext!$oext$ac_delim
+aext!$aext$ac_delim
+libm_machine_dir!$libm_machine_dir$ac_delim
+machine_dir!$machine_dir$ac_delim
+sys_dir!$sys_dir$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in  :F $CONFIG_FILES
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      ac_file_inputs="$ac_file_inputs $ac_f"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input="Generated from "`IFS=:
+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    fi
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin";;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
+  sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out"; rm -f "$tmp/out";;
+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+  esac
+ ;;
+
+
+
+  esac
+
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure.in newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in
--- newlib-1.17.0/newlib/libc/sys/avr32/configure.in	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,13 @@
+dnl This is the newlib/libc/sys/avr32 configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([newlib],[NEWLIB_VERSION])
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
+AC_CONFIG_AUX_DIR(../../../..)
+
+NEWLIB_CONFIGURE(../../..)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/crt0.S newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S
--- newlib-1.17.0/newlib/libc/sys/avr32/crt0.S	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,83 @@
+
+	.section	.reset,"ax"
+	
+	.global _start
+	.type	_start,@function
+_start:
+	/* Jump to wherever the linker thinks we are... */
+	lddpc	pc, .Ltext_vaddr
+
+	.align	2
+.Ltext_vaddr:
+	.word	_stext
+
+	.text
+	.global	_stext
+_stext:
+	/* Zero marks the end of the outermost frame.  */
+	mov	r7, 0
+
+	/*  Set up the stack pointer to a fixed value */
+	lda.w	r10, _estack
+
+	/*  If _stack is -1 don't set sp, the stack is then probably
+	    set by some other means i.e. by a bootloader. */
+	cp	r10, -1
+	movne	sp, r10
+
+	/* Copy the data segment into RAM if necessary. If data_lma
+	   is equal to data then VMA==LMA and no copying is necessary.
+	   The linker script must make sure that the data segment is at
+	   least dword-aligned.  */
+	lda.w	r11, _data_lma
+	lda.w	r12, _data
+	cp.w	r11, r12
+	breq	1f
+	lda.w	r10, _edata
+2:	ld.d	r8, r11++
+	st.d	r12++, r8
+	cp.w	r12, r10
+	brlt	2b
+	
+	/* Zero the memory in the .bss section.  */
+1:	lda.w	r10, _end
+	lda.w	r12, _edata
+
+	mov	r8, 0
+	mov	r9, 0
+2:	st.d	r12++, r8
+	cp.w	r12, r10
+	brlt	2b
+
+	/* User dependent initialization */
+	call	_init_startup
+
+	/* Register _fini function with atexit 
+	   The _fini function is responsible for calling destructiors */
+	lda.w	r12, _fini
+	call	atexit
+
+	/* Call _init in order to initialize constructors etc */
+	call	_init
+		
+	/*Initialize argv, use stack for keeping arguments. 
+          _init_argv() returns argc in r12 and argv in r11
+	 and the total size used for the arguments in r10.*/
+	mov	r12, sp	
+	/* Signal that we are storing the arguments in a stackwise
+	   top down approach. */	
+	mov	r11, 0	
+	call	_init_argv
+	/* If initialization if argv is not handled then _init_argv
+           returns -1 so set argc to 0 and make sure no space is 
+	   allocated on the stack. */
+	cp.w	r12, -1
+	moveq	r12, 0
+	moveq	r10, 0
+	sub	sp, r10
+
+	/* Call main and call exit when it returns */
+	call	main
+	call	exit
+
+	.weak	_data_lma
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am
--- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,18 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+AM_CCASFLAGS = $(INCLUDES)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = syscalls.c setjmp.S
+lib_a_CCASFLAGS = $(AM_CCASFLAGS)
+lib_a_CFLAGS = $(AM_CFLAGS)
+
+all: crt0.o
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in
--- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,329 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+AR = @AR@
+AS = @AS@
+CC = @CC@
+CPP = @CPP@
+EXEEXT = @EXEEXT@
+LDFLAGS = @LDFLAGS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+aext = @aext@
+libm_machine_dir = @libm_machine_dir@
+machine_dir = @machine_dir@
+newlib_basedir = @newlib_basedir@
+oext = @oext@
+sys_dir = @sys_dir@
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = syscalls.c setjmp.S
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+LIBRARIES =  $(noinst_LIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) 
+CPPFLAGS =
+LIBS = @LIBS@
+lib_a_LIBADD = 
+lib_a_OBJECTS =  syscalls.o setjmp.o
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+SOURCES = $(lib_a_SOURCES)
+OBJECTS = $(lib_a_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .o .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
+		../../../acinclude.m4 ../../../aclocal.m4 \
+		../../../libtool.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+mostlyclean-noinstLIBRARIES:
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+distclean-noinstLIBRARIES:
+
+maintainer-clean-noinstLIBRARIES:
+
+.c.o:
+	$(COMPILE) -c $<
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
+	-rm -f lib.a
+	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
+	$(RANLIB) lib.a
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am:
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-info-am: 
+install-info: install-info-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(LIBRARIES)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
+		mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
+		mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-noinstLIBRARIES distclean-compile \
+		distclean-tags distclean-generic clean-am
+
+distclean: distclean-am
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
+		maintainer-clean-compile maintainer-clean-tags \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+	-rm -f config.status
+
+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
+check-am installcheck-am installcheck install-info-am install-info \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+all: crt0.o
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S
--- newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,20 @@
+	.text
+	.globl setjmp
+setjmp:
+	stm	r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr
+	retal	0
+
+	.globl longjmp
+longjmp:	
+	ldm	r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr
+	/* Put the return value into the integer result register.
+	   But if it is zero then return 1 instead.  */	
+	cp	r11, 0
+	reteq	1
+	retal	r11
+
+
+	
+
+	
+	
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h
--- newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,158 @@
+#ifndef __ASM_AVR32_SYSREGS_H
+#define __ASM_AVR32_SYSREGS_H
+
+#define SYSREG_SR	  0
+#define SYSREG_EVBA	  4
+#define SYSREG_ACBA	  8
+#define SYSREG_CPUCR	 12
+#define SYSREG_ECR       16
+#define SYSREG_RSR_SUP	 20
+#define SYSREG_RSR_INT0	 24
+#define SYSREG_RSR_INT1	 28
+#define SYSREG_RSR_INT2	 32
+#define SYSREG_RSR_INT3	 36
+#define SYSREG_RSR_EX	 40
+#define SYSREG_RSR_NMI	 44
+#define SYSREG_RSR_DBG	 48
+#define SYSREG_RAR_SUP	 52
+#define SYSREG_RAR_INT0	 56
+#define SYSREG_RAR_INT1	 60
+#define SYSREG_RAR_INT2	 64
+#define SYSREG_RAR_INT3	 68
+#define SYSREG_RAR_EX	 72
+#define SYSREG_RAR_NMI	 76
+#define SYSREG_RAR_DBG	 80
+#define SYSREG_JECR       84
+#define SYSREG_JOSP       88
+#define SYSREG_JAVA_LV0   92
+#define SYSREG_JAVA_LV1   96
+#define SYSREG_JAVA_LV2   100
+#define SYSREG_JAVA_LV3   104
+#define SYSREG_JAVA_LV4   108
+#define SYSREG_JAVA_LV5   112
+#define SYSREG_JAVA_LV6   116
+#define SYSREG_JAVA_LV7   120
+#define SYSREG_JTBA       124
+#define SYSREG_JBCR       128
+
+#define SYSREG_CONFIG0	256
+#define SYSREG_CONFIG1	260
+#define SYSREG_COUNT	264
+#define SYSREG_COMPARE	268
+
+#define SYSREG_BEAR 316
+
+/* MMU interface registers */
+#define SYSREG_TLBEHI	272
+#define SYSREG_TLBELO	276
+#define SYSREG_PTBR	280
+#define SYSREG_TLBEAR	284
+#define SYSREG_MMUCR	288
+#define SYSREG_TLBARLO	292
+#define SYSREG_TLBDRLO	296
+#define SYSREG_TLBARHI	300
+#define SYSREG_TLBDRHI	304
+
+/* Performance counter */
+#define SYSREG_PCCR	320
+
+ // Status register bits
+#define SR_C_OFFSET    0
+#define SR_Z_OFFSET    1
+#define SR_N_OFFSET    2
+#define SR_V_OFFSET    3
+#define SR_Q_OFFSET    4
+#define SR_T_OFFSET    14
+#define SR_R_OFFSET    15
+#define SR_GM_OFFSET   16
+#define SR_I0M_OFFSET  17
+#define SR_I1M_OFFSET  18
+#define SR_I2M_OFFSET  19
+#define SR_I3M_OFFSET  20
+#define SR_EM_OFFSET   21
+#define SR_M0_OFFSET   22
+#define SR_M1_OFFSET   23
+#define SR_M2_OFFSET   24
+#define SR_D_OFFSET    26
+#define SR_DM_OFFSET   27
+#define SR_J_OFFSET    28
+
+#define SR_C    (1 << 0)
+#define SR_Z    (1 << 1)
+#define SR_N    (1 << 2)
+#define SR_V    (1 << 3)
+#define SR_Q    (1 << 4)
+#define SR_T    (1 << 14)
+#define SR_R    (1 << 15)
+#define SR_GM   (1 << 16)
+#define SR_I0M  (1 << 17)
+#define SR_I1M  (1 << 18)
+#define SR_I2M  (1 << 19)
+#define SR_I3M  (1 << 20)
+#define SR_EM   (1 << 21)
+#define SR_M0   (1 << 22)
+#define SR_M1   (1 << 23)
+#define SR_M2   (1 << 24)
+#define SR_D    (1 << 26)
+#define SR_DM   (1 << 27)
+#define SR_J    (1 << 28)
+
+//PCCR bits
+#define PCCRS  (1<<3)
+#define PCCRC  (1<<2)
+#define PCCRR  (1<<1)
+#define PCCRE  (1<<0)
+#define PCCNT_PRESCALE 64
+
+//TLBEHI bits
+#define TLBEHIVPN  (1<<10)
+#define TLBEHIV  (1<<9)
+#define TLBEHII  (1<<0)
+ 
+//TLBELO = bits
+#define TLBELOPFN  (1<<10)
+#define TLBELOC  (1<<9)
+#define TLBELOG  (1<<8)
+#define TLBELOB  (1<<7)
+#define TLBELOAP  (1<<5)
+#define TLBELOSZ  (1<<2)
+#define TLBELOD  (1<<1)
+#define TLBELOW  (1<<0)
+ 
+//MMUCR bits
+#define MMUIRP  (1<<26)
+#define MMUILA  (1<<20)
+#define MMUDRP  (1<<14)
+#define MMUDLA  (1<<8)
+#define MMUS  (1<<4)
+#define MMUN  (1<<3)
+#define MMUI  (1<<2)
+#define MMUM  (1<<1)
+#define MMUE  (1<<0)
+ 
+// Relative offsets to EVBA
+#define H_UNREC_EX  0x000
+#define H_TLB_MH    0x004
+#define H_BUS_ERR_D 0x008
+#define H_BUS_ERR_I 0x00C
+#define H_NMI       0x010
+#define H_INST_ADDR 0x014
+#define H_ITLB_MISS 0x050
+#define H_ITLB_PROT 0x018
+#define H_DEBUG     0x01C
+#define H_ILL_OPC   0x020
+#define H_UNIMPL_INST 0x024
+#define H_PRIV_VIOL 0x028
+#define H_FLOAT_PT  0x02C
+#define H_COPROC_ABS 0x030
+#define H_SCALL  0x100
+#define H_DATA_ADDR_R  0x034
+#define H_DATA_ADDR_W  0x038
+#define H_DTLB_MISS_R  0x060
+#define H_DTLB_MISS_W  0x070
+#define H_DTLB_PROT_R  0x03C
+#define H_DTLB_PROT_W  0x040
+#define H_DTLB_MOD  0x044
+
+
+#endif /* __ASM_AVR32_SYSREGS_H */
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c
--- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,234 @@
+#include "syscalls.h"
+#include "sys/sysregs.h"
+#include <sys/times.h>
+#include <sys/time.h>
+#include <stdio.h>
+#include <errno.h>
+
+int  __attribute__((weak))
+     _init_startup ()
+{
+  return 0;
+}
+
+
+clock_t __attribute__((weak))
+     _times( struct tms *tms )
+{
+  int tick;
+  tick = __builtin_mfsr(SYSREG_COUNT);
+  tms->tms_utime = 0;
+  tms->tms_stime = tick;
+  tms->tms_cutime = 0;
+  tms->tms_cstime = 0;
+  return tick;
+}
+ 
+extern void __heap_start__, __heap_end__;
+
+void * __attribute__((weak))
+     _sbrk(int increment)
+{
+  static void *cur_heap_pos = 0;
+
+  //Initialize cur_heap_pos
+  if ( cur_heap_pos == 0 )
+    cur_heap_pos = &__heap_start__;
+  
+  if ( (cur_heap_pos + increment) <= &__heap_end__ ){
+    void *heap_pos = cur_heap_pos;
+    cur_heap_pos += increment;
+    return heap_pos;
+  } else {
+#ifdef DEBUG_MSG_ON
+    fprintf(stderr, "Warning: Heap is running full trying to allocate %i bytes!!!!\n", increment);
+    fprintf(stderr, "\tHeap start address\t= 0x%x\n", &__heap_start__);
+    fprintf(stderr, "\tHeap end address\t= 0x%x\n", &__heap_end__);
+    fprintf(stderr, "\tCurrent heap address\t= 0x%x\n", cur_heap_pos);
+    fflush(stderr);
+#endif
+    errno = ENOMEM;
+    return (void *)-1;
+  }  
+  return (void *)-1;
+}
+  
+void __attribute__((weak,naked))
+     _init_argv (void *arg_mem_top)
+{
+  T2H_SYSCALL(T2H_SYSCALL_INIT_ARGV);
+  T2H_SYSCALL_RETURN();
+}
+
+void __attribute__((weak,naked))
+     _exit( int code )
+{
+  T2H_SYSCALL(T2H_SYSCALL_EXIT);
+  while (1);
+}
+
+int __attribute__((weak,naked))
+     _open (char *pathname, int flags, int mode)
+{
+  T2H_SYSCALL(T2H_SYSCALL_OPEN);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak,naked))
+     _close (int file)
+{
+  T2H_SYSCALL(T2H_SYSCALL_CLOSE);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak,naked))
+     _lseek( int filedes, int offset, int whence )
+{
+  T2H_SYSCALL(T2H_SYSCALL_LSEEK);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+
+int __attribute__((weak,naked))
+     _read (int file,
+            char * ptr,
+            int len){
+  T2H_SYSCALL(T2H_SYSCALL_READ);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak,naked))
+     _write (int file,
+             char * ptr,
+             int len){
+  T2H_SYSCALL(T2H_SYSCALL_WRITE);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak,naked))
+     isatty (int desc){ 
+  T2H_SYSCALL(T2H_SYSCALL_ISATTY);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+static void _convert_host2target_stat(struct stat *target_stat, struct host_stat *host_stat)
+{
+  target_stat->st_dev = (dev_t)host_stat->st_dev;
+  target_stat->st_ino = (ino_t)host_stat->st_ino;
+  target_stat->st_mode = (mode_t)host_stat->st_mode;
+  target_stat->st_nlink = (nlink_t)host_stat->st_nlink;
+  target_stat->st_uid = (uid_t)host_stat->st_uid;
+  target_stat->st_gid = (gid_t)host_stat->st_gid;
+  target_stat->st_rdev = (dev_t)host_stat->st_rdev;
+  target_stat->st_size = (off_t)host_stat->st_size;
+  target_stat->st_blksize = (long)host_stat->st_blksize;
+  target_stat->st_blocks = (long)host_stat->st_blocks;
+  target_stat->st_atime = (time_t)host_stat->st_atime; 
+  target_stat->st_mtime = (time_t)host_stat->st_mtime;
+  target_stat->st_ctime = (time_t)host_stat->st_ctime;
+}
+
+int __attribute__((naked))
+     _fstat_host (int filedes, struct host_stat *ptr){ 
+  T2H_SYSCALL(T2H_SYSCALL_FSTAT);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((naked))
+     _stat_host (const char *filename, struct host_stat *ptr){ 
+  T2H_SYSCALL(T2H_SYSCALL_STAT);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak))
+     _fstat (int filedes, struct stat *stat){ 
+  struct host_stat host_stat;
+  if ( _fstat_host (filedes, &host_stat) < 0 )
+    return -1;
+  _convert_host2target_stat (stat, &host_stat);
+  return 0;
+}
+
+int __attribute__((weak))
+     _stat (const char *filename, struct stat *stat){ 
+  struct host_stat host_stat;
+  if ( _stat_host (filename, &host_stat) < 0)
+    return -1;
+  _convert_host2target_stat (stat, &host_stat);
+  return 0;
+}
+
+
+int __attribute__((naked))
+     _gettimeofday_host (struct host_timeval *tv, struct timezone *tz){ 
+  T2H_SYSCALL(T2H_SYSCALL_GETTIMEOFDAY);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak))
+     _gettimeofday (struct timeval *tv, struct timezone *tz){ 
+  struct host_timeval host_tv;
+  if ( _gettimeofday_host (&host_tv, tz)  < 0 )
+    return -1;
+  tv->tv_sec = (long)host_tv.tv_sec;
+  tv->tv_usec = (long)host_tv.tv_usec;
+  return 0;
+}
+
+int __attribute__((weak,naked))
+     _unlink (const char *path){ 
+  T2H_SYSCALL(T2H_SYSCALL_UNLINK);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak,naked))
+     _system (const char *command){ 
+  T2H_SYSCALL(T2H_SYSCALL_SYSTEM);
+  T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
+}
+
+int __attribute__((weak))
+     _execve (){
+  return -1;
+}
+
+
+int __attribute__((weak))
+     _fork (){ 
+  return -1;
+}
+
+int __attribute__((weak))
+     _wait (){ 
+  return -1; 
+}
+
+int __attribute__((weak))
+     sigfillset (){ 
+  return -1;
+}
+
+int __attribute__((weak))
+     sigprocmask (){ 
+  return -1;
+}
+
+int __attribute__((weak))
+     _fcntl (){ 
+  return -1;
+}
+
+int __attribute__((weak))
+     _link (){ 
+  return -1;
+}
+
+int __attribute__((weak))
+     _kill (){ 
+  return -1;
+}
+
+int __attribute__((weak))
+     _getpid (){
+  return -1;
+}
diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h
--- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h	1970-01-01 01:00:00.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h	2009-05-22 09:57:50.000000000 +0200
@@ -0,0 +1,72 @@
+#ifndef __SYSCALLS_H__
+#define __SYSCALLS_H__
+
+#include <sys/stat.h>
+#include <errno.h>
+
+struct host_stat {
+  unsigned int       st_dev;      /* device */
+  unsigned int       st_ino;      /* inode */
+  mode_t             st_mode;     /* protection */
+  unsigned int       st_nlink;    /* number of hard links */
+  unsigned int       st_uid;      /* user ID of owner */
+  unsigned int       st_gid;      /* group ID of owner */
+  unsigned int       st_rdev;     /* device type (if inode device) */
+  unsigned long long st_size;     /* total size, in bytes */
+  unsigned long long st_blksize;  /* blocksize for filesystem I/O */
+  unsigned long long st_blocks;   /* number of blocks allocated */
+  time_t             st_atime;    /* time of last access */
+  time_t             st_mtime;    /* time of last modification */
+  time_t             st_ctime;    /* time of last change */
+};
+
+struct host_timeval {
+  time_t tv_sec;
+  long long tv_usec;
+};
+
+
+#define T2H_SYSCALL_OPEN                1
+#define T2H_SYSCALL_CLOSE               2
+#define T2H_SYSCALL_READ                3
+#define T2H_SYSCALL_WRITE               4
+#define T2H_SYSCALL_LSEEK               5
+#define T2H_SYSCALL_RENAME              6
+#define T2H_SYSCALL_UNLINK              7
+#define T2H_SYSCALL_STAT                8
+#define T2H_SYSCALL_FSTAT               9
+#define T2H_SYSCALL_GETTIMEOFDAY        10
+#define T2H_SYSCALL_ISATTY              11
+#define T2H_SYSCALL_SYSTEM              12
+#define T2H_SYSCALL_EXIT                13
+#define T2H_SYSCALL_INIT_ARGV           14
+
+
+/* The breakpoint/mov r12,-1/mov r11,... pattern causes
+   the debugger to be able to recognize the system call. 
+   If the debug system is not enabled then the breakpoint 
+   is executed as a nop and r12 set to -1 and errno to 
+   ENOSYS. The debugger is responsible for setting r12
+   and r11 and skipping the instructions after the breakpoint
+   which would otherwise set these registers.
+*/    
+#define T2H_SYSCALL(syscall_code)                 \
+  asm ("mov   r8, %0\n"                           \
+       "breakpoint\n"                             \
+       "mov   r12, -1\n"                          \
+       "mov   r11, %1\n"                          \
+       :: "i" (syscall_code), "i" (ENOSYS) );
+
+#define T2H_SYSCALL_CHECK_ERROR_AND_RETURN()                            \
+  asm ("cp.w  r12, 0\n"                                                 \
+       "retge r12\n"                                                    \
+       "lda.w r10, errno\n"                                             \
+       "st.w  r10[0], r11\n"                                            \
+       "ret   r12\n"                                                    \
+       ".align 2\n"                                                     \
+       ".cpool\n");
+
+#define T2H_SYSCALL_RETURN()                                       \
+  asm ("ret  r12\n");                                            
+
+#endif
diff -Naur newlib-1.17.0/newlib/libc/sys/configure newlib-1.17.0-new/newlib/libc/sys/configure
--- newlib-1.17.0/newlib/libc/sys/configure	2008-12-22 20:45:49.000000000 +0100
+++ newlib-1.17.0-new/newlib/libc/sys/configure	2009-05-22 09:57:50.000000000 +0200
@@ -1,25 +1,54 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for newlib 1.17.0.
+# Generated by GNU Autoconf 2.61 for newlib 1.17.0.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -29,8 +58,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -44,18 +108,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -63,157 +128,388 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# CDPATH.
+$as_unset CDPATH
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
 fi
 
+  if test $as_have_required = yes && 	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
+  case $as_dir in
 	 /*)
-	   if ("$as_dir/$as_base" -c '
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
+        export CONFIG_SHELL
+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell autoconf@gnu.org about your system,
+  echo including any error possibly output before this
+  echo message
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
+  chmod +x "$as_me.lineno" ||
     { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -222,7 +518,28 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -231,15 +548,6 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 
 
 # Check that we are running under the correct shell.
@@ -390,29 +698,26 @@
 
 
 
+exec 7<&0 </dev/null 6>&1
+
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
 # Identity of this package.
 PACKAGE_NAME='newlib'
 PACKAGE_TARNAME='newlib'
@@ -424,66 +729,214 @@
 # Factoring default headers for most tests.
 ac_includes_default="\
 #include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
 # include <sys/types.h>
 #endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
 # include <sys/stat.h>
 #endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
 # include <stdlib.h>
 # include <stddef.h>
 #else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
 #  include <stdlib.h>
 # endif
 #endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
 #  include <memory.h>
 # endif
 # include <string.h>
 #endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
 # include <strings.h>
 #endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
 # include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
 #endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
 # include <unistd.h>
 #endif"
 
-ac_subdirs_all="$ac_subdirs_all a29khif"
-ac_subdirs_all="$ac_subdirs_all arc"
-ac_subdirs_all="$ac_subdirs_all arm"
-ac_subdirs_all="$ac_subdirs_all d10v"
-ac_subdirs_all="$ac_subdirs_all decstation"
-ac_subdirs_all="$ac_subdirs_all h8300hms"
-ac_subdirs_all="$ac_subdirs_all h8500hms"
-ac_subdirs_all="$ac_subdirs_all linux"
-ac_subdirs_all="$ac_subdirs_all m88kbug"
-ac_subdirs_all="$ac_subdirs_all mmixware"
-ac_subdirs_all="$ac_subdirs_all netware"
-ac_subdirs_all="$ac_subdirs_all rdos"
-ac_subdirs_all="$ac_subdirs_all rtems"
-ac_subdirs_all="$ac_subdirs_all sh"
-ac_subdirs_all="$ac_subdirs_all sparc64"
-ac_subdirs_all="$ac_subdirs_all sun4"
-ac_subdirs_all="$ac_subdirs_all sysmec"
-ac_subdirs_all="$ac_subdirs_all sysnec810"
-ac_subdirs_all="$ac_subdirs_all sysnecv850"
-ac_subdirs_all="$ac_subdirs_all sysvi386"
-ac_subdirs_all="$ac_subdirs_all sysvnecv70"
-ac_subdirs_all="$ac_subdirs_all tic80"
-ac_subdirs_all="$ac_subdirs_all w65"
-ac_subdirs_all="$ac_subdirs_all z8ksim"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs CRT0 HAVE_SYS_DIR_TRUE HAVE_SYS_DIR_FALSE LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+MAY_SUPPLY_SYSCALLS_TRUE
+MAY_SUPPLY_SYSCALLS_FALSE
+newlib_basedir
+build
+build_cpu
+build_vendor
+build_os
+host
+host_cpu
+host_vendor
+host_os
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+CC
+DEPDIR
+am__include
+am__quote
+AMDEP_TRUE
+AMDEP_FALSE
+AMDEPBACKSLASH
+CCDEPMODE
+am__fastdepCC_TRUE
+am__fastdepCC_FALSE
+AS
+AR
+RANLIB
+READELF
+MAINTAINER_MODE_TRUE
+MAINTAINER_MODE_FALSE
+MAINT
+CCAS
+CCASFLAGS
+NEWLIB_CFLAGS
+LDFLAGS
+ELIX_LEVEL_0_TRUE
+ELIX_LEVEL_0_FALSE
+ELIX_LEVEL_1_TRUE
+ELIX_LEVEL_1_FALSE
+ELIX_LEVEL_2_TRUE
+ELIX_LEVEL_2_FALSE
+ELIX_LEVEL_3_TRUE
+ELIX_LEVEL_3_FALSE
+ELIX_LEVEL_4_TRUE
+ELIX_LEVEL_4_FALSE
+USE_LIBTOOL_TRUE
+USE_LIBTOOL_FALSE
+OBJEXT
+oext
+aext
+lpfx
+libm_machine_dir
+machine_dir
+sys_dir
+SED
+DLLTOOL
+OBJDUMP
+LIBTOOL
+CFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+GREP
+EGREP
+FGREP
+LD
+DUMPBIN
+ac_ct_DUMPBIN
+NM
+LN_S
+lt_ECHO
+DSYMUTIL
+NMEDIT
+LIPO
+OTOOL
+OTOOL64
+CPP
+subdirs
+CRT0
+HAVE_SYS_DIR_TRUE
+HAVE_SYS_DIR_FALSE
+LIBOBJS
+LTLIBOBJS'
 ac_subst_files=''
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CCAS
+CCASFLAGS
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+ac_subdirs_all='a29khif
+arc
+arm
+avr32
+d10v
+decstation
+h8300hms
+h8500hms
+linux
+m88kbug
+mmixware
+netware
+rdos
+rtems
+sh
+sparc64
+sun4
+sysmec
+sysnec810
+sysnecv850
+sysvi386
+sysvnecv70
+tic80
+w65
+z8ksim'
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -510,34 +963,48 @@
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -559,33 +1026,45 @@
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
     ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
     ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+    eval enable_$ac_feature=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -612,6 +1091,12 @@
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -636,13 +1121,16 @@
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -707,6 +1195,16 @@
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -759,24 +1257,20 @@
   -with-* | --with-*)
     ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=\$ac_optarg ;;
 
   -without-* | --without-*)
     ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+    eval with_$ac_package=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -807,8 +1301,7 @@
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
@@ -828,27 +1321,19 @@
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Be sure to have absolute directory names.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -875,82 +1360,76 @@
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { echo "$as_me: error: Working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$0" ||
 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$0" : 'X\(//\)[^/]' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CCAS_set=${CCAS+set}
-ac_env_CCAS_value=$CCAS
-ac_cv_env_CCAS_set=${CCAS+set}
-ac_cv_env_CCAS_value=$CCAS
-ac_env_CCASFLAGS_set=${CCASFLAGS+set}
-ac_env_CCASFLAGS_value=$CCASFLAGS
-ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set}
-ac_cv_env_CCASFLAGS_value=$CCASFLAGS
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+   { (exit 1); exit 1; }; }
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -979,9 +1458,6 @@
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
 			  [$ac_default_prefix]
@@ -999,15 +1475,22 @@
   --bindir=DIR           user executables [EPREFIX/bin]
   --sbindir=DIR          system admin executables [EPREFIX/sbin]
   --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
   --libdir=DIR           object code libraries [EPREFIX/lib]
   --includedir=DIR       C header files [PREFIX/include]
   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR          info documentation [DATAROOTDIR/info]
+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR           man documentation [DATAROOTDIR/man]
+  --docdir=DIR           documentation root [DATAROOTDIR/doc/newlib]
+  --htmldir=DIR          html documentation [DOCDIR]
+  --dvidir=DIR           dvi documentation [DOCDIR]
+  --pdfdir=DIR           pdf documentation [DOCDIR]
+  --psdir=DIR            ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1044,10 +1527,8 @@
   --enable-dependency-tracking   do not reject slow dependency extractors
   --enable-maintainer-mode  enable make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer
-  --enable-shared[=PKGS]
-                          build shared libraries [default=yes]
-  --enable-static[=PKGS]
-                          build static libraries [default=yes]
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
@@ -1066,128 +1547,95 @@
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
 
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" || continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 newlib configure 1.17.0
-generated by GNU Autoconf 2.59
+generated by GNU Autoconf 2.61
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by newlib $as_me 1.17.0, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.61.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -1206,7 +1654,7 @@
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -1220,6 +1668,7 @@
   test -z "$as_dir" && as_dir=.
   echo "PATH: $as_dir"
 done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -1241,7 +1690,6 @@
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -1252,7 +1700,7 @@
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+    *\'*)
       ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
@@ -1274,9 +1722,7 @@
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      ac_configure_args="$ac_configure_args '$ac_arg'"
       ;;
     esac
   done
@@ -1287,8 +1733,8 @@
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1301,20 +1747,34 @@
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1325,22 +1785,28 @@
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1352,26 +1818,24 @@
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
   trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1402,14 +1866,17 @@
 
 # Let the site file select an alternate cache file if it wants to.
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+if test -n "$CONFIG_SITE"; then
+  set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+  set x "$ac_default_prefix/share/config.site" \
+	"$ac_default_prefix/etc/config.site"
 fi
-for ac_site_file in $CONFIG_SITE; do
+shift
+for ac_site_file
+do
   if test -r "$ac_site_file"; then
     { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
 echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1425,8 +1892,8 @@
     { echo "$as_me:$LINENO: loading cache $cache_file" >&5
 echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
@@ -1438,12 +1905,11 @@
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
       { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1468,8 +1934,7 @@
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1486,12 +1951,6 @@
    { (exit 1); exit 1; }; }
 fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
 
 
 
@@ -1516,67 +1975,92 @@
 
 
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
 
 ac_aux_dir=
-for ac_dir in ../../.. $srcdir/../../..; do
-  if test -f $ac_dir/install-sh; then
+for ac_dir in ../../.. "$srcdir"/../../..; do
+  if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
     break
-  elif test -f $ac_dir/install.sh; then
+  elif test -f "$ac_dir/install.sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
-  elif test -f $ac_dir/shtool; then
+  elif test -f "$ac_dir/shtool"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/shtool install -c"
     break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;}
    { (exit 1); exit 1; }; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 
 
 # Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
    { (exit 1); exit 1; }; }
 
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
 if test "${ac_cv_build+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
   { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
    { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+echo "$as_me: error: invalid value of canonical build" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
 build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
 am__api_version="1.9"
@@ -1593,8 +2077,8 @@
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1616,7 +2100,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1635,21 +2119,22 @@
     ;;
 esac
 done
+IFS=$as_save_IFS
 
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1659,8 +2144,8 @@
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
@@ -1702,20 +2187,20 @@
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
 # Double any \ or $.  echo might interpret backslashes.
 # By default was `s,x,x', remove it if useless.
 cat <<\_ACEOF >conftest.sed
 s/[\\$]/&&/g;s/;s,x,x,$//
 _ACEOF
 program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+rm -f conftest.sed
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -1767,8 +2252,8 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1781,54 +2266,57 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+  { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$AWK" && break
 done
 
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
 all:
-	@echo 'ac_maketemp="$(MAKE)"'
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
 rm -f conftest.make
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
   SET_MAKE=
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1843,7 +2331,7 @@
 
 DEPDIR="${am__leading_dot}deps"
 
-          ac_config_commands="$ac_config_commands depfiles"
+ac_config_commands="$ac_config_commands depfiles"
 
 
 am_make=${MAKE-make}
@@ -1853,8 +2341,8 @@
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
 am__include="#"
 am__quote=
 _am_result=none
@@ -1881,15 +2369,15 @@
 fi
 
 
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
+{ echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6; }
 rm -f confinc confmf
 
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+# Check whether --enable-dependency-tracking was given.
 if test "${enable_dependency_tracking+set}" = set; then
-  enableval="$enable_dependency_tracking"
+  enableval=$enable_dependency_tracking;
+fi
 
-fi;
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
@@ -1907,10 +2395,9 @@
 
 
 
-# Check whether --enable-multilib or --disable-multilib was given.
+# Check whether --enable-multilib was given.
 if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
+  enableval=$enable_multilib; case "${enableval}" in
   yes) multilib=yes ;;
   no)  multilib=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
@@ -1919,11 +2406,11 @@
  esac
 else
   multilib=yes
-fi;
-# Check whether --enable-target-optspace or --disable-target-optspace was given.
+fi
+
+# Check whether --enable-target-optspace was given.
 if test "${enable_target_optspace+set}" = set; then
-  enableval="$enable_target_optspace"
-  case "${enableval}" in
+  enableval=$enable_target_optspace; case "${enableval}" in
   yes) target_optspace=yes ;;
   no)  target_optspace=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
@@ -1932,11 +2419,11 @@
  esac
 else
   target_optspace=
-fi;
-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
+fi
+
+# Check whether --enable-malloc-debugging was given.
 if test "${enable_malloc_debugging+set}" = set; then
-  enableval="$enable_malloc_debugging"
-  case "${enableval}" in
+  enableval=$enable_malloc_debugging; case "${enableval}" in
   yes) malloc_debugging=yes ;;
   no)  malloc_debugging=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
@@ -1945,11 +2432,11 @@
  esac
 else
   malloc_debugging=
-fi;
-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
+fi
+
+# Check whether --enable-newlib-multithread was given.
 if test "${enable_newlib_multithread+set}" = set; then
-  enableval="$enable_newlib_multithread"
-  case "${enableval}" in
+  enableval=$enable_newlib_multithread; case "${enableval}" in
   yes) newlib_multithread=yes ;;
   no)  newlib_multithread=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
@@ -1958,11 +2445,11 @@
  esac
 else
   newlib_multithread=yes
-fi;
-# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given.
+fi
+
+# Check whether --enable-newlib-iconv was given.
 if test "${enable_newlib_iconv+set}" = set; then
-  enableval="$enable_newlib_iconv"
-  if test "${newlib_iconv+set}" != set; then
+  enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
    case "${enableval}" in
      yes) newlib_iconv=yes ;;
      no)  newlib_iconv=no ;;
@@ -1973,11 +2460,11 @@
  fi
 else
   newlib_iconv=${newlib_iconv}
-fi;
-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
+fi
+
+# Check whether --enable-newlib-elix-level was given.
 if test "${enable_newlib_elix_level+set}" = set; then
-  enableval="$enable_newlib_elix_level"
-  case "${enableval}" in
+  enableval=$enable_newlib_elix_level; case "${enableval}" in
   0)   newlib_elix_level=0 ;;
   1)   newlib_elix_level=1 ;;
   2)   newlib_elix_level=2 ;;
@@ -1989,11 +2476,11 @@
  esac
 else
   newlib_elix_level=0
-fi;
-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
+fi
+
+# Check whether --enable-newlib-io-float was given.
 if test "${enable_newlib_io_float+set}" = set; then
-  enableval="$enable_newlib_io_float"
-  case "${enableval}" in
+  enableval=$enable_newlib_io_float; case "${enableval}" in
   yes) newlib_io_float=yes ;;
   no)  newlib_io_float=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
@@ -2002,11 +2489,11 @@
  esac
 else
   newlib_io_float=yes
-fi;
-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
+fi
+
+# Check whether --enable-newlib-supplied-syscalls was given.
 if test "${enable_newlib_supplied_syscalls+set}" = set; then
-  enableval="$enable_newlib_supplied_syscalls"
-  case "${enableval}" in
+  enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
   yes) newlib_may_supply_syscalls=yes ;;
   no)  newlib_may_supply_syscalls=no ;;
   *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
@@ -2015,7 +2502,8 @@
  esac
 else
   newlib_may_supply_syscalls=yes
-fi;
+fi
+
 
 
 if test x${newlib_may_supply_syscalls} = xyes; then
@@ -2041,26 +2529,41 @@
 fi
 
 
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
 if test "${ac_cv_host+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
    { (exit 1); exit 1; }; }
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+echo "$as_me: error: invalid value of canonical host" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
 host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
 
@@ -2113,8 +2616,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2127,32 +2630,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2165,27 +2670,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -2220,8 +2739,8 @@
 
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2234,30 +2753,32 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 
+
 depcc="$CC"   am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2346,8 +2867,8 @@
 fi
 
 fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
 
@@ -2366,8 +2887,8 @@
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2381,7 +2902,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -2392,6 +2913,7 @@
   fi
 done
 done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -2409,20 +2931,21 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
 echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
-echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
-echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
+echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2442,8 +2965,8 @@
   ac_cv_c_compiler_gnu=no
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
 
 if test $ac_cv_c_compiler_gnu = yes; then
   GCC=yes
@@ -2452,13 +2975,16 @@
   CFLAGS=
   ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2474,38 +3000,118 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -2537,8 +3143,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2551,32 +3157,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AS="${ac_tool_prefix}as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AS=$ac_cv_prog_AS
 if test -n "$AS"; then
-  echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6
+  { echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AS"; then
   ac_ct_AS=$AS
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2589,26 +3197,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AS="as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AS=$ac_cv_prog_ac_ct_AS
 if test -n "$ac_ct_AS"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-echo "${ECHO_T}$ac_ct_AS" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AS=$ac_ct_AS
+  if test "x$ac_ct_AS" = x; then
+    AS=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
 else
   AS="$ac_cv_prog_AS"
 fi
@@ -2616,8 +3239,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2630,32 +3253,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+  { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AR"; then
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2668,26 +3293,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AR=$ac_ct_AR
+  if test "x$ac_ct_AR" = x; then
+    AR=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
 else
   AR="$ac_cv_prog_AR"
 fi
@@ -2695,8 +3335,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2709,32 +3349,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2747,27 +3389,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  RANLIB=$ac_ct_RANLIB
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
 else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
@@ -2775,8 +3431,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args.
 set dummy ${ac_tool_prefix}readelf; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_READELF+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2789,32 +3445,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_READELF="${ac_tool_prefix}readelf"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 READELF=$ac_cv_prog_READELF
 if test -n "$READELF"; then
-  echo "$as_me:$LINENO: result: $READELF" >&5
-echo "${ECHO_T}$READELF" >&6
+  { echo "$as_me:$LINENO: result: $READELF" >&5
+echo "${ECHO_T}$READELF" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_READELF"; then
   ac_ct_READELF=$READELF
   # Extract the first word of "readelf", so it can be a program name with args.
 set dummy readelf; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2827,27 +3485,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_READELF="readelf"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":"
 fi
 fi
 ac_ct_READELF=$ac_cv_prog_ac_ct_READELF
 if test -n "$ac_ct_READELF"; then
-  echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
-echo "${ECHO_T}$ac_ct_READELF" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
+echo "${ECHO_T}$ac_ct_READELF" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  READELF=$ac_ct_READELF
+  if test "x$ac_ct_READELF" = x; then
+    READELF=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    READELF=$ac_ct_READELF
+  fi
 else
   READELF="$ac_cv_prog_READELF"
 fi
@@ -2866,8 +3538,8 @@
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -2889,7 +3561,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2908,21 +3580,22 @@
     ;;
 esac
 done
+IFS=$as_save_IFS
 
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -2936,17 +3609,17 @@
 # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13.  */
 ac_given_INSTALL=$INSTALL
 
-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+    # Check whether --enable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
   USE_MAINTAINER_MODE=no
-fi;
-  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+fi
+
+  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
 
 
 if test $USE_MAINTAINER_MODE = yes; then
@@ -3066,64 +3739,89 @@
 
 
 
-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
-if test "${lt_cv_path_SED+set}" = set; then
+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
+if test "${ac_cv_path_SED+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" | sed 99q >conftest.sed
+     $as_unset ac_script || ac_script=
+     # Extract the first word of "sed gsed" to use in msg output
+if test -z "$SED"; then
+set dummy sed gsed; ac_prog_name=$2
+if test "${ac_cv_path_SED+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
+  ac_path_SED_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
+  for ac_prog in sed gsed; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+    # Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_SED_found && break 3
   done
 done
 
+done
+IFS=$as_save_IFS
+
+
+fi
+
+SED="$ac_cv_path_SED"
+if test -z "$SED"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
-SED=$lt_cv_path_SED
+else
+  ac_cv_path_SED=$SED
+fi
 
-echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+echo "${ECHO_T}$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
 
 test -z "$SED" && SED=sed
 Xsed="$SED -e 1s/^X//"
@@ -3146,8 +3844,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3160,32 +3858,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AS="${ac_tool_prefix}as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AS=$ac_cv_prog_AS
 if test -n "$AS"; then
-  echo "$as_me:$LINENO: result: $AS" >&5
-echo "${ECHO_T}$AS" >&6
+  { echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AS"; then
   ac_ct_AS=$AS
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3198,27 +3898,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AS="as"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false"
 fi
 fi
 ac_ct_AS=$ac_cv_prog_ac_ct_AS
 if test -n "$ac_ct_AS"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-echo "${ECHO_T}$ac_ct_AS" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AS=$ac_ct_AS
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
 else
   AS="$ac_cv_prog_AS"
 fi
@@ -3226,8 +3940,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_DLLTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3240,32 +3954,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 DLLTOOL=$ac_cv_prog_DLLTOOL
 if test -n "$DLLTOOL"; then
-  echo "$as_me:$LINENO: result: $DLLTOOL" >&5
-echo "${ECHO_T}$DLLTOOL" >&6
+  { echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_DLLTOOL"; then
   ac_ct_DLLTOOL=$DLLTOOL
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3278,27 +3994,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DLLTOOL="dlltool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false"
 fi
 fi
 ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
 if test -n "$ac_ct_DLLTOOL"; then
-  echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
-echo "${ECHO_T}$ac_ct_DLLTOOL" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
+echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  DLLTOOL=$ac_ct_DLLTOOL
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
 else
   DLLTOOL="$ac_cv_prog_DLLTOOL"
 fi
@@ -3306,8 +4036,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3320,32 +4050,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OBJDUMP=$ac_cv_prog_OBJDUMP
 if test -n "$OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-echo "${ECHO_T}$OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OBJDUMP"; then
   ac_ct_OBJDUMP=$OBJDUMP
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3358,27 +4090,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
 fi
 fi
 ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
 if test -n "$ac_ct_OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OBJDUMP=$ac_ct_OBJDUMP
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
 else
   OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
@@ -3439,8 +4185,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3453,32 +4199,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3491,36 +4239,51 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3533,98 +4296,59 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
+  fi
 fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
+if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
 else
+  ac_prog_rejected=no
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -3642,22 +4366,23 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
+  for ac_prog in cl.exe
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3670,36 +4395,38 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl
+  for ac_prog in cl.exe
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3712,29 +4439,45 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_CC" && break
 done
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 fi
 
 fi
@@ -3747,21 +4490,35 @@
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
+echo "$as_me:$LINENO: checking for C compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
@@ -3786,47 +4543,77 @@
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort.  b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions.  Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link_default") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
 	break;;
     *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
+        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
 	break;;
     * )
 	break;;
   esac
 done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
 else
+  ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
@@ -3838,19 +4625,21 @@
 fi
 
 ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
 
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -3869,22 +4658,27 @@
     fi
   fi
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 
 rm -f a.out a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
@@ -3895,9 +4689,8 @@
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
 	  break;;
     * ) break;;
   esac
@@ -3911,14 +4704,14 @@
 fi
 
 rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
 if test "${ac_cv_objext+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3938,14 +4731,20 @@
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
@@ -3963,12 +4762,12 @@
 
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3991,50 +4790,49 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_compiler_gnu=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_compiler_gnu=no
+	ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
 GCC=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4050,38 +4848,118 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -4097,12 +4975,12 @@
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_prog_cc_stdc=no
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -4136,12 +5014,17 @@
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
+   as 'x'.  The following induces an error, until -std is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
+   that's true only with -std.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -4156,205 +5039,57 @@
   return 0;
 }
 _ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_cv_prog_cc_c89=$ac_arg
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
 CC=$ac_save_CC
 
 fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+  xno)
+    { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
   *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+    CC="$CC $ac_cv_prog_cc_c89"
+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
 esac
 
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -4363,8 +5098,8 @@
 
 depcc="$CC"   am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4446,58 +5181,273 @@
     fi
   done
 
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Extract the first word of "grep ggrep" to use in msg output
+if test -z "$GREP"; then
+set dummy grep ggrep; ac_prog_name=$2
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_GREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in grep ggrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+    # Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_GREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+GREP="$ac_cv_path_GREP"
+if test -z "$GREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     # Extract the first word of "egrep" to use in msg output
+if test -z "$EGREP"; then
+set dummy egrep; ac_prog_name=$2
+if test "${ac_cv_path_EGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_EGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in egrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+    # Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_EGREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
 fi
 
+EGREP="$ac_cv_path_EGREP"
+if test -z "$EGREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
 fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
+else
+  ac_cv_path_EGREP=$EGREP
+fi
 
 
-if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
+   fi
 fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
 
 
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
+{ echo "$as_me:$LINENO: checking for fgrep" >&5
+echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     # Extract the first word of "fgrep" to use in msg output
+if test -z "$FGREP"; then
+set dummy fgrep; ac_prog_name=$2
+if test "${ac_cv_path_FGREP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
+  ac_path_FGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in fgrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+    # Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_FGREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
 
+FGREP="$ac_cv_path_FGREP"
+if test -z "$FGREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
-echo "$as_me:$LINENO: checking for fgrep" >&5
-echo $ECHO_N "checking for fgrep... $ECHO_C" >&6
-if test "${ac_cv_prog_fgrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1
-    then ac_cv_prog_fgrep='grep -F'
-    else ac_cv_prog_fgrep='fgrep'
-    fi
+  ac_cv_path_FGREP=$FGREP
+fi
+
+
+   fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5
-echo "${ECHO_T}$ac_cv_prog_fgrep" >&6
- FGREP=$ac_cv_prog_fgrep
+{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
 
 
 test -z "$GREP" && GREP=grep
@@ -4520,18 +5470,18 @@
 
 
 
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
+# Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 else
   with_gnu_ld=no
-fi;
+fi
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -4560,11 +5510,11 @@
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
 else
-  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
 fi
 if test "${lt_cv_path_LD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -4597,17 +5547,17 @@
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
+  { echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4621,8 +5571,8 @@
   ;;
 esac
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
@@ -4633,8 +5583,8 @@
 
 
 
-echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
-echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; }
 if test "${lt_cv_path_NM+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4682,8 +5632,8 @@
   : ${lt_cv_path_NM=no}
 fi
 fi
-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6; }
 if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
@@ -4693,8 +5643,8 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_DUMPBIN+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4707,25 +5657,27 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 DUMPBIN=$ac_cv_prog_DUMPBIN
 if test -n "$DUMPBIN"; then
-  echo "$as_me:$LINENO: result: $DUMPBIN" >&5
-echo "${ECHO_T}$DUMPBIN" >&6
+  { echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+echo "${ECHO_T}$DUMPBIN" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$DUMPBIN" && break
   done
 fi
@@ -4735,8 +5687,8 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4749,30 +5701,45 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
 if test -n "$ac_ct_DUMPBIN"; then
-  echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
-echo "${ECHO_T}$ac_ct_DUMPBIN" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_DUMPBIN" && break
 done
-test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":"
 
-  DUMPBIN=$ac_ct_DUMPBIN
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
 fi
 
 
@@ -4787,43 +5754,43 @@
 
 
 
-echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
-echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; }
 if test "${lt_cv_nm_interface+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:4797: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:5764: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4800: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:5767: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4803: output\"" >&5)
+  (eval echo "\"\$as_me:5770: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
   fi
   rm -f conftest*
 fi
-echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
-echo "${ECHO_T}$lt_cv_nm_interface" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+echo "${ECHO_T}$lt_cv_nm_interface" >&6; }
 
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
 LN_S=$as_ln_s
 if test "$LN_S" = "ln -s"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 else
-  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
+  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6; }
 fi
 
 # find the maximum length of command line arguments
-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
 if test "${lt_cv_sys_max_cmd_len+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4942,11 +5909,11 @@
 fi
 
 if test -n $lt_cv_sys_max_cmd_len ; then
-  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
 else
-  echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
+  { echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6; }
 fi
 max_cmd_len=$lt_cv_sys_max_cmd_len
 
@@ -4959,8 +5926,8 @@
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 
-echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
-echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; }
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
@@ -4969,18 +5936,18 @@
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
-echo "$as_me:$LINENO: result: $xsi_shell" >&5
-echo "${ECHO_T}$xsi_shell" >&6
+{ echo "$as_me:$LINENO: result: $xsi_shell" >&5
+echo "${ECHO_T}$xsi_shell" >&6; }
 
 
-echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
-echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; }
 lt_shell_append=no
 ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
     >/dev/null 2>&1 \
   && lt_shell_append=yes
-echo "$as_me:$LINENO: result: $lt_shell_append" >&5
-echo "${ECHO_T}$lt_shell_append" >&6
+{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+echo "${ECHO_T}$lt_shell_append" >&6; }
 
 
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -5014,15 +5981,15 @@
 
 
 
-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
 if test "${lt_cv_ld_reload_flag+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_ld_reload_flag='-r'
 fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
 reload_flag=$lt_cv_ld_reload_flag
 case $reload_flag in
 "" | " "*) ;;
@@ -5050,8 +6017,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5064,32 +6031,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OBJDUMP=$ac_cv_prog_OBJDUMP
 if test -n "$OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-echo "${ECHO_T}$OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OBJDUMP"; then
   ac_ct_OBJDUMP=$OBJDUMP
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5102,27 +6071,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
 fi
 fi
 ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
 if test -n "$ac_ct_OBJDUMP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OBJDUMP=$ac_ct_OBJDUMP
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
 else
   OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
@@ -5134,8 +6117,8 @@
 
 
 
-echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
 if test "${lt_cv_deplibs_check_method+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5330,8 +6313,8 @@
 esac
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -5350,8 +6333,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5364,32 +6347,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+  { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AR"; then
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5402,27 +6387,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AR=$ac_ct_AR
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
 else
   AR="$ac_cv_prog_AR"
 fi
@@ -5443,8 +6442,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5457,32 +6456,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5495,27 +6496,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -5530,8 +6545,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5544,32 +6559,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5582,27 +6599,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  RANLIB=$ac_ct_RANLIB
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
 else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
@@ -5675,8 +6706,8 @@
 
 
 # Check for command to grab the raw symbol name followed by C symbol from nm.
-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
 if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5895,11 +6926,11 @@
   lt_cv_sys_global_symbol_to_cdecl=
 fi
 if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6
+  { echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6; }
 else
-  echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6
+  { echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6; }
 fi
 
 
@@ -5924,11 +6955,11 @@
 
 
 
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+# Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
+  enableval=$enable_libtool_lock;
+fi
 
-fi;
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -5955,7 +6986,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 5958 "configure"' > conftest.$ac_ext
+  echo '#line 6989 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6047,8 +7078,8 @@
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
 if test "${lt_cv_cc_needs_belf+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6074,35 +7105,32 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   lt_cv_cc_needs_belf=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-lt_cv_cc_needs_belf=no
+	lt_cv_cc_needs_belf=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -6111,8 +7139,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
@@ -6151,8 +7179,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
 set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6165,32 +7193,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 DSYMUTIL=$ac_cv_prog_DSYMUTIL
 if test -n "$DSYMUTIL"; then
-  echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-echo "${ECHO_T}$DSYMUTIL" >&6
+  { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+echo "${ECHO_T}$DSYMUTIL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_DSYMUTIL"; then
   ac_ct_DSYMUTIL=$DSYMUTIL
   # Extract the first word of "dsymutil", so it can be a program name with args.
 set dummy dsymutil; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6203,27 +7233,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":"
 fi
 fi
 ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
 if test -n "$ac_ct_DSYMUTIL"; then
-  echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  DSYMUTIL=$ac_ct_DSYMUTIL
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
 else
   DSYMUTIL="$ac_cv_prog_DSYMUTIL"
 fi
@@ -6231,8 +7275,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
 set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_NMEDIT+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6245,32 +7289,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 NMEDIT=$ac_cv_prog_NMEDIT
 if test -n "$NMEDIT"; then
-  echo "$as_me:$LINENO: result: $NMEDIT" >&5
-echo "${ECHO_T}$NMEDIT" >&6
+  { echo "$as_me:$LINENO: result: $NMEDIT" >&5
+echo "${ECHO_T}$NMEDIT" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_NMEDIT"; then
   ac_ct_NMEDIT=$NMEDIT
   # Extract the first word of "nmedit", so it can be a program name with args.
 set dummy nmedit; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6283,27 +7329,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_NMEDIT="nmedit"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":"
 fi
 fi
 ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
 if test -n "$ac_ct_NMEDIT"; then
-  echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-echo "${ECHO_T}$ac_ct_NMEDIT" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  NMEDIT=$ac_ct_NMEDIT
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
 else
   NMEDIT="$ac_cv_prog_NMEDIT"
 fi
@@ -6311,8 +7371,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
 set dummy ${ac_tool_prefix}lipo; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_LIPO+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6325,32 +7385,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 LIPO=$ac_cv_prog_LIPO
 if test -n "$LIPO"; then
-  echo "$as_me:$LINENO: result: $LIPO" >&5
-echo "${ECHO_T}$LIPO" >&6
+  { echo "$as_me:$LINENO: result: $LIPO" >&5
+echo "${ECHO_T}$LIPO" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_LIPO"; then
   ac_ct_LIPO=$LIPO
   # Extract the first word of "lipo", so it can be a program name with args.
 set dummy lipo; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6363,27 +7425,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_LIPO="lipo"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":"
 fi
 fi
 ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
 if test -n "$ac_ct_LIPO"; then
-  echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
-echo "${ECHO_T}$ac_ct_LIPO" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
+echo "${ECHO_T}$ac_ct_LIPO" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  LIPO=$ac_ct_LIPO
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
 else
   LIPO="$ac_cv_prog_LIPO"
 fi
@@ -6391,8 +7467,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
 set dummy ${ac_tool_prefix}otool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6405,32 +7481,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OTOOL=$ac_cv_prog_OTOOL
 if test -n "$OTOOL"; then
-  echo "$as_me:$LINENO: result: $OTOOL" >&5
-echo "${ECHO_T}$OTOOL" >&6
+  { echo "$as_me:$LINENO: result: $OTOOL" >&5
+echo "${ECHO_T}$OTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OTOOL"; then
   ac_ct_OTOOL=$OTOOL
   # Extract the first word of "otool", so it can be a program name with args.
 set dummy otool; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6443,27 +7521,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OTOOL="otool"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":"
 fi
 fi
 ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
 if test -n "$ac_ct_OTOOL"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
-echo "${ECHO_T}$ac_ct_OTOOL" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
+echo "${ECHO_T}$ac_ct_OTOOL" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OTOOL=$ac_ct_OTOOL
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
 else
   OTOOL="$ac_cv_prog_OTOOL"
 fi
@@ -6471,8 +7563,8 @@
     if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
 set dummy ${ac_tool_prefix}otool64; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_OTOOL64+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6485,32 +7577,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 OTOOL64=$ac_cv_prog_OTOOL64
 if test -n "$OTOOL64"; then
-  echo "$as_me:$LINENO: result: $OTOOL64" >&5
-echo "${ECHO_T}$OTOOL64" >&6
+  { echo "$as_me:$LINENO: result: $OTOOL64" >&5
+echo "${ECHO_T}$OTOOL64" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_OTOOL64"; then
   ac_ct_OTOOL64=$OTOOL64
   # Extract the first word of "otool64", so it can be a program name with args.
 set dummy otool64; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6523,27 +7617,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_OTOOL64="otool64"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":"
 fi
 fi
 ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
 if test -n "$ac_ct_OTOOL64"; then
-  echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
-echo "${ECHO_T}$ac_ct_OTOOL64" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
+echo "${ECHO_T}$ac_ct_OTOOL64" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  OTOOL64=$ac_ct_OTOOL64
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
 else
   OTOOL64="$ac_cv_prog_OTOOL64"
 fi
@@ -6574,8 +7682,8 @@
 
 
 
-    echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
 if test "${lt_cv_apple_cc_single_mod+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6601,10 +7709,10 @@
 	rm -f conftest.*
       fi
 fi
-echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6
-    echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
+    { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
 if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6628,41 +7736,38 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   lt_cv_ld_exported_symbols_list=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-lt_cv_ld_exported_symbols_list=no
+	lt_cv_ld_exported_symbols_list=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 	LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -6703,8 +7808,8 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -6738,24 +7843,22 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -6764,9 +7867,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -6776,24 +7880,22 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
@@ -6804,6 +7906,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -6821,8 +7924,8 @@
 else
   ac_cv_prog_CPP=$CPP
 fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
 do
@@ -6845,24 +7948,22 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -6871,9 +7972,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -6883,24 +7985,22 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
   # Broken: success on invalid input.
 continue
 else
@@ -6911,6 +8011,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -6933,8 +8034,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
 if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6958,35 +8059,31 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   ac_cv_header_stdc=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_header_stdc=no
+	ac_cv_header_stdc=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
@@ -7042,6 +8139,7 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
+#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -7061,18 +8159,27 @@
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
+      return 2;
+  return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -7085,12 +8192,14 @@
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
+
+
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -7113,9 +8222,9 @@
 		  inttypes.h stdint.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -7129,38 +8238,35 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_Header=no"
+	eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -7175,9 +8281,9 @@
 for ac_header in dlfcn.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -7191,38 +8297,35 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_Header=no"
+	eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -7242,10 +8345,9 @@
 
 
 
-            # Check whether --enable-shared or --disable-shared was given.
+            # Check whether --enable-shared was given.
 if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
+  enableval=$enable_shared; p=${PACKAGE-default}
     case $enableval in
     yes) enable_shared=yes ;;
     no) enable_shared=no ;;
@@ -7264,7 +8366,7 @@
     esac
 else
   enable_shared=yes
-fi;
+fi
 
 
 
@@ -7273,10 +8375,10 @@
 
 
 
-  # Check whether --enable-static or --disable-static was given.
+
+  # Check whether --enable-static was given.
 if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
+  enableval=$enable_static; p=${PACKAGE-default}
     case $enableval in
     yes) enable_static=yes ;;
     no) enable_static=no ;;
@@ -7295,7 +8397,7 @@
     esac
 else
   enable_static=yes
-fi;
+fi
 
 
 
@@ -7305,13 +8407,14 @@
 
 
 
-# Check whether --with-pic or --without-pic was given.
+
+# Check whether --with-pic was given.
 if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
+  withval=$with_pic; pic_mode="$withval"
 else
   pic_mode=default
-fi;
+fi
+
 
 test -z "$pic_mode" && pic_mode=default
 
@@ -7321,10 +8424,9 @@
 
 
 
-  # Check whether --enable-fast-install or --disable-fast-install was given.
+  # Check whether --enable-fast-install was given.
 if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
+  enableval=$enable_fast_install; p=${PACKAGE-default}
     case $enableval in
     yes) enable_fast_install=yes ;;
     no) enable_fast_install=no ;;
@@ -7343,7 +8445,8 @@
     esac
 else
   enable_fast_install=yes
-fi;
+fi
+
 
 
 
@@ -7403,8 +8506,8 @@
    setopt NO_GLOB_SUBST
 fi
 
-echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
 if test "${lt_cv_objdir+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7418,8 +8521,8 @@
 fi
 rmdir .libs 2>/dev/null
 fi
-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6; }
 objdir=$lt_cv_objdir
 
 
@@ -7511,8 +8614,8 @@
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7564,11 +8667,11 @@
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 
@@ -7577,8 +8680,8 @@
 
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7630,11 +8733,11 @@
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 
@@ -7714,8 +8817,8 @@
 if test "$GCC" = yes; then
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -7732,11 +8835,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7735: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8838: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7739: \$? = $ac_status" >&5
+   echo "$as_me:8842: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7749,8 +8852,8 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
 if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
@@ -7769,8 +8872,8 @@
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -8041,8 +9144,8 @@
     lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
     ;;
 esac
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
 
 
 
@@ -8053,8 +9156,8 @@
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8071,11 +9174,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8074: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9177: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8078: \$? = $ac_status" >&5
+   echo "$as_me:9181: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8088,8 +9191,8 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
 
 if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
     case $lt_prog_compiler_pic in
@@ -8112,8 +9215,8 @@
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_static_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8140,8 +9243,8 @@
    LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
 
 if test x"$lt_cv_prog_compiler_static_works" = xyes; then
     :
@@ -8155,8 +9258,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8176,11 +9279,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8179: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9282: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8183: \$? = $ac_status" >&5
+   echo "$as_me:9286: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -8202,16 +9305,16 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
 
 
 
 
 
 
-  echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8231,11 +9334,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8234: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9337: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8238: \$? = $ac_status" >&5
+   echo "$as_me:9341: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -8257,8 +9360,8 @@
    $RM conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
 
 
 
@@ -8266,16 +9369,16 @@
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
   hard_links=yes
   $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
+  { echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6; }
   if test "$hard_links" = no; then
     { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
@@ -8290,8 +9393,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 
   runpath_var=
   allow_undefined_flag=
@@ -8748,27 +9851,23 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -8786,8 +9885,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -8817,27 +9918,23 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -8855,8 +9952,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -9073,35 +10172,33 @@
 int foo(void) {}
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
         LDFLAGS="$save_LDFLAGS"
       else
@@ -9358,8 +10455,8 @@
     fi
   fi
 
-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6
+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6; }
 test "$ld_shlibs" = no && can_build_shared=no
 
 with_gnu_ld=$with_gnu_ld
@@ -9395,46 +10492,52 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
+if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+	if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-	pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-        then
-	  archive_cmds_need_lc=no
-        else
-	  archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
+echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
       ;;
     esac
   fi
@@ -9597,8 +10700,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
 
 if test "$GCC" = yes; then
   case $host_os in
@@ -10014,12 +11117,17 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+
   # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-  cat >conftest.$ac_ext <<_ACEOF
+  if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -10035,40 +11143,42 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
-  shlibpath_overrides_runpath=yes
+  lt_cv_shlibpath_overrides_runpath=yes
 fi
 
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -10278,8 +11388,8 @@
   dynamic_linker=no
   ;;
 esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -10380,8 +11490,8 @@
 
 
 
-  echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" ||
    test -n "$runpath_var" ||
@@ -10405,8 +11515,8 @@
   # directories.
   hardcode_action=unsupported
 fi
-echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6
+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6; }
 
 if test "$hardcode_action" = relink ||
    test "$inherit_rpath" = yes; then
@@ -10450,8 +11560,8 @@
 
   darwin*)
   # if libdl is installed we need to link against it
-    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10464,56 +11574,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dl_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dl_dlopen=no
+	ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
 if test $ac_cv_lib_dl_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
@@ -10527,8 +11634,8 @@
     ;;
 
   *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
 if test "${ac_cv_func_shl_load+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10555,73 +11662,64 @@
 
 #undef shl_load
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char shl_load ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
+#if defined __stub_shl_load || defined __stub___shl_load
 choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != shl_load;
+return shl_load ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_shl_load=no
+	ac_cv_func_shl_load=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
 if test $ac_cv_func_shl_load = yes; then
   lt_cv_dlopen="shl_load"
 else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dld_shl_load+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10634,61 +11732,58 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char shl_load ();
 int
 main ()
 {
-shl_load ();
+return shl_load ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dld_shl_load=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dld_shl_load=no
+	ac_cv_lib_dld_shl_load=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
 if test $ac_cv_lib_dld_shl_load = yes; then
   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
 if test "${ac_cv_func_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10715,73 +11810,64 @@
 
 #undef dlopen
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
+#if defined __stub_dlopen || defined __stub___dlopen
 choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != dlopen;
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_func_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_dlopen=no
+	ac_cv_func_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
 if test $ac_cv_func_dlopen = yes; then
   lt_cv_dlopen="dlopen"
 else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10794,61 +11880,58 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dl_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dl_dlopen=no
+	ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
 if test $ac_cv_lib_dl_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_svld_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10861,61 +11944,58 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_svld_dlopen=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_svld_dlopen=no
+	ac_cv_lib_svld_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
 if test $ac_cv_lib_svld_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dld_dld_link+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10928,56 +12008,53 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dld_link ();
 int
 main ()
 {
-dld_link ();
+return dld_link ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
   ac_cv_lib_dld_dld_link=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dld_dld_link=no
+	ac_cv_lib_dld_dld_link=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
 if test $ac_cv_lib_dld_dld_link = yes; then
   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
@@ -11017,8 +12094,8 @@
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
 if test "${lt_cv_dlopen_self+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -11028,7 +12105,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11031 "configure"
+#line 12108 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11108,13 +12185,13 @@
 
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
 if test "${lt_cv_dlopen_self_static+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -11124,7 +12201,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11127 "configure"
+#line 12204 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11204,8 +12281,8 @@
 
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
     fi
 
     CPPFLAGS="$save_CPPFLAGS"
@@ -11243,13 +12320,13 @@
 
 striplib=
 old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
 if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
@@ -11257,16 +12334,16 @@
     if test -n "$STRIP" ; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
-      echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+      { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
     else
-      echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+      { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
     fi
     ;;
   *)
-    echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+    { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
     ;;
   esac
 fi
@@ -11283,13 +12360,13 @@
 
 
   # Report which library types will actually be built
-  echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-  echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6
+  { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
+  { echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6; }
 
-  echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
   test "$can_build_shared" = "no" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
@@ -11309,15 +12386,15 @@
     fi
     ;;
   esac
-  echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6
+  { echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6; }
 
-  echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
   # Make sure either enable_shared or enable_static is yes.
   test "$enable_shared" = yes || enable_static=yes
-  echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6
+  { echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6; }
 
 
 
@@ -11343,7 +12420,7 @@
 
 
 
-                  ac_config_commands="$ac_config_commands libtool"
+        ac_config_commands="$ac_config_commands libtool"
 
 
 
@@ -11355,101 +12432,55 @@
 
 if test -n "${sys_dir}"; then
   case ${sys_dir} in
-	a29khif)
-
-subdirs="$subdirs a29khif"
+	a29khif) subdirs="$subdirs a29khif"
  ;;
-	arc)
-
-subdirs="$subdirs arc"
+	arc) subdirs="$subdirs arc"
  ;;
-	arm)
-
-subdirs="$subdirs arm"
+	arm) subdirs="$subdirs arm"
  ;;
-	d10v)
-
-subdirs="$subdirs d10v"
+	avr32) subdirs="$subdirs avr32"
  ;;
-	decstation)
-
-subdirs="$subdirs decstation"
+	d10v) subdirs="$subdirs d10v"
  ;;
-	h8300hms)
-
-subdirs="$subdirs h8300hms"
+	decstation) subdirs="$subdirs decstation"
  ;;
-	h8500hms)
-
-subdirs="$subdirs h8500hms"
+	h8300hms) subdirs="$subdirs h8300hms"
  ;;
-	linux)
-
-subdirs="$subdirs linux"
+	h8500hms) subdirs="$subdirs h8500hms"
  ;;
-	m88kbug)
-
-subdirs="$subdirs m88kbug"
+	linux) subdirs="$subdirs linux"
  ;;
-	mmixware)
-
-subdirs="$subdirs mmixware"
+	m88kbug) subdirs="$subdirs m88kbug"
  ;;
-	netware)
-
-subdirs="$subdirs netware"
+	mmixware) subdirs="$subdirs mmixware"
  ;;
-	rdos)
-
-subdirs="$subdirs rdos"
+	netware) subdirs="$subdirs netware"
  ;;
-	rtems)
-
-subdirs="$subdirs rtems"
+	rdos) subdirs="$subdirs rdos"
  ;;
-	sh)
-
-subdirs="$subdirs sh"
+	rtems) subdirs="$subdirs rtems"
  ;;
-	sparc64)
-
-subdirs="$subdirs sparc64"
+	sh) subdirs="$subdirs sh"
  ;;
-	sun4)
-
-subdirs="$subdirs sun4"
+	sparc64) subdirs="$subdirs sparc64"
  ;;
-	sysmec)
-
-subdirs="$subdirs sysmec"
+	sun4) subdirs="$subdirs sun4"
  ;;
-	sysnec810)
-
-subdirs="$subdirs sysnec810"
+	sysmec) subdirs="$subdirs sysmec"
  ;;
-	sysnecv850)
-
-subdirs="$subdirs sysnecv850"
+	sysnec810) subdirs="$subdirs sysnec810"
  ;;
-	sysvi386)
-
-subdirs="$subdirs sysvi386"
+	sysnecv850) subdirs="$subdirs sysnecv850"
  ;;
-	sysvnecv70)
-
-subdirs="$subdirs sysvnecv70"
+	sysvi386) subdirs="$subdirs sysvi386"
  ;;
-	tic80)
-
-subdirs="$subdirs tic80"
+	sysvnecv70) subdirs="$subdirs sysvnecv70"
  ;;
-	w65)
-
-subdirs="$subdirs w65"
+	tic80) subdirs="$subdirs tic80"
  ;;
-	z8ksim)
-
-subdirs="$subdirs z8ksim"
+	w65) subdirs="$subdirs w65"
+ ;;
+	z8ksim) subdirs="$subdirs z8ksim"
  ;;
   esac;
 fi
@@ -11471,7 +12502,7 @@
 fi
 
 
-          ac_config_files="$ac_config_files Makefile"
+ac_config_files="$ac_config_files Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -11491,39 +12522,58 @@
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       # `set' does not quote correctly, so add quotes (double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \).
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -11532,63 +12582,48 @@
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
 #
 # If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
+# take arguments), then branch to the quote section.  Otherwise,
 # look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
+ac_script='
 t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\),-D\1=\2,g
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\),-D\1=\2,g
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-d
-: quote
-s,[	 `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
 
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -11703,17 +12738,45 @@
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -11723,8 +12786,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -11738,18 +12836,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -11757,159 +12856,120 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
 
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -11918,7 +12978,28 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+        test -d "$1/.";
+      else
+	case $1 in
+        -*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -11927,31 +13008,14 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
 
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
 This file was extended by newlib $as_me 1.17.0, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.61.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -11959,30 +13023,19 @@
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
+cat >>$CONFIG_STATUS <<_ACEOF
 # Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
 
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+_ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
-
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
@@ -11990,7 +13043,7 @@
 Usage: $0 [OPTIONS] [FILE]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
+  -V, --version    print version number and configuration settings, then exit
   -q, --quiet      do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
@@ -12004,19 +13057,21 @@
 $config_commands
 
 Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
 newlib config.status 1.17.0
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.61,
+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -12027,60 +13082,42 @@
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
     CONFIG_FILES="$CONFIG_FILES $ac_optarg"
     ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+  -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -12096,17 +13133,28 @@
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  CONFIG_SHELL=$SHELL
+  export CONFIG_SHELL
+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  echo "$ac_log"
+} >&5
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 #
-# INIT-COMMANDS section.
+# INIT-COMMANDS
 #
-
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 
@@ -12367,22 +13415,23 @@
 
 _ACEOF
 
-
-
 cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -12393,397 +13442,493 @@
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
   trap '{ (exit 1); exit 1; }' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
 } ||
 {
    echo "$me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
 #
-# CONFIG_FILES section.
+# Set up the sed scripts for CONFIG_FILES section.
 #
 
 # No need to generate the scripts if there are no CONFIG_FILES.
 # This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t
-s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t
-s,@newlib_basedir@,$newlib_basedir,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@CC@,$CC,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@AS@,$AS,;t t
-s,@ac_ct_AS@,$ac_ct_AS,;t t
-s,@AR@,$AR,;t t
-s,@ac_ct_AR@,$ac_ct_AR,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@READELF@,$READELF,;t t
-s,@ac_ct_READELF@,$ac_ct_READELF,;t t
-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-s,@MAINT@,$MAINT,;t t
-s,@CCAS@,$CCAS,;t t
-s,@CCASFLAGS@,$CCASFLAGS,;t t
-s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t
-s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t
-s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t
-s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t
-s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t
-s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t
-s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t
-s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t
-s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t
-s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t
-s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t
-s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@oext@,$oext,;t t
-s,@aext@,$aext,;t t
-s,@lpfx@,$lpfx,;t t
-s,@libm_machine_dir@,$libm_machine_dir,;t t
-s,@machine_dir@,$machine_dir,;t t
-s,@sys_dir@,$sys_dir,;t t
-s,@SED@,$SED,;t t
-s,@DLLTOOL@,$DLLTOOL,;t t
-s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t
-s,@OBJDUMP@,$OBJDUMP,;t t
-s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t
-s,@LIBTOOL@,$LIBTOOL,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@EGREP@,$EGREP,;t t
-s,@FGREP@,$FGREP,;t t
-s,@GREP@,$GREP,;t t
-s,@LD@,$LD,;t t
-s,@DUMPBIN@,$DUMPBIN,;t t
-s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t
-s,@NM@,$NM,;t t
-s,@LN_S@,$LN_S,;t t
-s,@lt_ECHO@,$lt_ECHO,;t t
-s,@DSYMUTIL@,$DSYMUTIL,;t t
-s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t
-s,@NMEDIT@,$NMEDIT,;t t
-s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t
-s,@LIPO@,$LIPO,;t t
-s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t
-s,@OTOOL@,$OTOOL,;t t
-s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t
-s,@OTOOL64@,$OTOOL64,;t t
-s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t
-s,@CPP@,$CPP,;t t
-s,@subdirs@,$subdirs,;t t
-s,@CRT0@,$CRT0,;t t
-s,@HAVE_SYS_DIR_TRUE@,$HAVE_SYS_DIR_TRUE,;t t
-s,@HAVE_SYS_DIR_FALSE@,$HAVE_SYS_DIR_FALSE,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
+newlib_basedir!$newlib_basedir$ac_delim
+build!$build$ac_delim
+build_cpu!$build_cpu$ac_delim
+build_vendor!$build_vendor$ac_delim
+build_os!$build_os$ac_delim
+host!$host$ac_delim
+host_cpu!$host_cpu$ac_delim
+host_vendor!$host_vendor$ac_delim
+host_os!$host_os$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+CC!$CC$ac_delim
+DEPDIR!$DEPDIR$ac_delim
+am__include!$am__include$ac_delim
+am__quote!$am__quote$ac_delim
+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
+CCDEPMODE!$CCDEPMODE$ac_delim
+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
+AS!$AS$ac_delim
+AR!$AR$ac_delim
+RANLIB!$RANLIB$ac_delim
+READELF!$READELF$ac_delim
+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
+MAINT!$MAINT$ac_delim
+CCAS!$CCAS$ac_delim
+CCASFLAGS!$CCASFLAGS$ac_delim
+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
-fi # test -n "$CONFIG_FILES"
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+CEOF$ac_eof
+_ACEOF
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+oext!$oext$ac_delim
+aext!$aext$ac_delim
+lpfx!$lpfx$ac_delim
+libm_machine_dir!$libm_machine_dir$ac_delim
+machine_dir!$machine_dir$ac_delim
+sys_dir!$sys_dir$ac_delim
+SED!$SED$ac_delim
+DLLTOOL!$DLLTOOL$ac_delim
+OBJDUMP!$OBJDUMP$ac_delim
+LIBTOOL!$LIBTOOL$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+GREP!$GREP$ac_delim
+EGREP!$EGREP$ac_delim
+FGREP!$FGREP$ac_delim
+LD!$LD$ac_delim
+DUMPBIN!$DUMPBIN$ac_delim
+ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim
+NM!$NM$ac_delim
+LN_S!$LN_S$ac_delim
+lt_ECHO!$lt_ECHO$ac_delim
+DSYMUTIL!$DSYMUTIL$ac_delim
+NMEDIT!$NMEDIT$ac_delim
+LIPO!$LIPO$ac_delim
+OTOOL!$OTOOL$ac_delim
+OTOOL64!$OTOOL64$ac_delim
+CPP!$CPP$ac_delim
+subdirs!$subdirs$ac_delim
+CRT0!$CRT0$ac_delim
+HAVE_SYS_DIR_TRUE!$HAVE_SYS_DIR_TRUE$ac_delim
+HAVE_SYS_DIR_FALSE!$HAVE_SYS_DIR_FALSE$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 41; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
 
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
 _ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
 cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in  :F $CONFIG_FILES      :C $CONFIG_COMMANDS
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      ac_file_inputs="$ac_file_inputs $ac_f"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input="Generated from "`IFS=:
+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    fi
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin";;
+    esac
+    ;;
   esac
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
   ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+_ACEOF
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
 _ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
 cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub
 $extrasub
@@ -12791,142 +13936,43 @@
 cat >>$CONFIG_STATUS <<\_ACEOF
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
 
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out"; rm -f "$tmp/out";;
+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+  esac
+ ;;
 
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
+  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
 
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -12936,18 +13982,29 @@
   # each Makefile.in and add a new line on top of each file to say so.
   # So let's grep whole file.
   if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
+    dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   else
     continue
   fi
@@ -12969,49 +14026,76 @@
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
+    fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { as_dir=$dirpart/$fdir
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
     # echo "creating $dirpart/$file"
     echo '# dummy' > "$dirpart/$file"
   done
 done
  ;;
-    libtool )
+    "libtool":C)
 
     # See if we are running on zsh, and set the options which allow our
     # commands through without removal of \ escapes.
@@ -13652,11 +14736,10 @@
   chmod +x "$ofile"
 
  ;;
+
   esac
-done
-_ACEOF
+done # for ac_tag
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
 { (exit 0); exit 0; }
 _ACEOF
@@ -13686,7 +14769,7 @@
 fi
 
 #
-# CONFIG_SUBDIRS section, as fixed in confsubdir.m4.
+# CONFIG_SUBDIRS section.
 #
 if test "$no_recursion" != yes; then
 
@@ -13733,7 +14816,12 @@
   case $ac_arg in
   *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
   esac
-  ac_sub_configure_args="$ac_arg $ac_sub_configure_args"
+  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
+
+  # Pass --silent
+  if test "$silent" = yes; then
+    ac_sub_configure_args="--silent $ac_sub_configure_args"
+  fi
 
   ac_popdir=`pwd`
   for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
@@ -13742,97 +14830,83 @@
     # parts of a large source tree are present.
     test -d "$srcdir/$ac_dir" || continue
 
-    { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
-echo "$as_me: configuring in $ac_dir" >&6;}
-    { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
+    ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
+    echo "$as_me:$LINENO: $ac_msg" >&5
+    echo "$ac_msg" >&6
+    { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
     ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
 
     cd "$ac_dir"
@@ -13856,8 +14930,8 @@
       # Make the cache file name correct relative to the subdirectory.
       case $cache_file in
       [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-	ac_sub_cache_file=$ac_top_builddir$cache_file ;;
+      *) # Relative name.
+	ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
       esac
 
       { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
diff -Naur newlib-1.17.0/newlib/libc/sys/configure.in newlib-1.17.0-new/newlib/libc/sys/configure.in
--- newlib-1.17.0/newlib/libc/sys/configure.in	2007-05-24 19:33:37.000000000 +0200
+++ newlib-1.17.0-new/newlib/libc/sys/configure.in	2009-05-22 09:57:50.000000000 +0200
@@ -24,6 +24,7 @@
 	a29khif) AC_CONFIG_SUBDIRS(a29khif) ;;
 	arc) AC_CONFIG_SUBDIRS(arc) ;;
 	arm) AC_CONFIG_SUBDIRS(arm) ;;
+	avr32) AC_CONFIG_SUBDIRS(avr32) ;;
 	d10v) AC_CONFIG_SUBDIRS(d10v) ;;
 	decstation) AC_CONFIG_SUBDIRS(decstation) ;;
 	h8300hms) AC_CONFIG_SUBDIRS(h8300hms) ;;