## automake - create Makefile.in from Makefile.am
## Copyright (C) 2001, 2003, 2006, 2007, 2008, 2009 Free Software
## Foundation, Inc.

## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2, or (at your option)
## any later version.

## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.

## You should have received a copy of the GNU General Public License
## along with this program.  If not, see <http://www.gnu.org/licenses/>.

if %?COLOR%
# If stdout is a non-dumb tty, use colors.  If test -t is not supported,
# then this fails; a conservative approach.  Of course do not redirect
# stdout here, just stderr.
am__tty_colors = \
red=; grn=; lgn=; blu=; std=; \
test "X$(AM_COLOR_TESTS)" != Xno \
&& test "X$$TERM" != Xdumb \
&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
&& { \
  red='[0;31m'; \
  grn='[0;32m'; \
  lgn='[1;32m'; \
  blu='[1;34m'; \
  std='[m'; \
}
else !%?COLOR%
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
endif !%?COLOR%

.PHONY: check-TESTS

if %?PARALLEL_TESTS%

include inst-vars.am

## New parallel test driver.
##
## This code is adapted from check.mk which was originally
## written at EPITA/LRDE, further developed at Gostai, then made
## its way from GNU coreutils to end up, largely rewritten, in
## Automake.
##
## It provides special support for "unit tests", that is to say,
## tests that (once run) no longer need to be re-compiled and
## re-run at each "make check", unless their sources changed.  To
## enable unit-test supports, set RECHECK_LOGS to empty.  In such a
## setting, that heavily relies on correct dependencies, its users may
## prefer to define EXTRA_PROGRAMS instead of check_PROGRAMS, because
## it allows intertwined compilation and execution of the tests.
## Sometimes this helps catching errors earlier (you don't have to
## wait for all the tests to be compiled).
##
## Define TEST_SUITE_LOG to be the name of the global log to create.
## Define TEST_LOGS to the set of logs to include in it.  It defaults
## to $(TESTS), with `.test' and `@EXEEXT@' removed, and `'.log'
## appended.
##
## In addition to the magic "exit 77 means SKIP" feature (which was
## imported from automake), there is a magic "exit 99 means FAIL" feature
## which is useful if you need to issue a hard error no matter whether the
## test is XFAIL or not.  You can disable this feature by setting the
## variable DISABLE_HARD_ERRORS to a nonempty value.

# Restructured Text title and section.
am__rst_title   = sed 's/.*/   &   /;h;s/./=/g;p;x;p;g;p;s/.*//'
am__rst_section = sed 'p;s/./=/g;p;g'

# Put stdin (possibly several lines separated by ".  ") in a box.
am__text_box = $(AWK) '{				\
  n = split($$0, lines, "\\.  "); max = 0;		\
  for (i = 1; i <= n; ++i)				\
    if (max < length(lines[i]))				\
      max = length(lines[i]);				\
  for (i = 0; i < max; ++i) line = line "=";		\
  print line;						\
  for (i = 1; i <= n; ++i) if (lines[i]) print lines[i];\
  print line;						\
}'

# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL).  This contradicts POSIX.  Work around the problem
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac

# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log, and passes
# TESTS_ENVIRONMENT.  Save and restore TERM around use of
# TESTS_ENVIRONMENT, in case that unsets it.
am__check_pre =						\
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
srcdir=$(srcdir); export srcdir;			\
rm -f $@-t;						\
trap 'st=$$?; rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st' \
  1 2 13 15;						\
am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;		\
test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?;	\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM;		\
$(TESTS_ENVIRONMENT)

# To be appended to the command running the test.  Handle the stdout
# and stderr redirection, and catch the exit status.
am__check_post =					\
>$@-t 2>&1;						\
estatus=$$?;						\
if test -n '$(DISABLE_HARD_ERRORS)'			\
   && test $$estatus -eq 99; then			\
  estatus=1;						\
fi;							\
TERM=$$__SAVED_TERM; export TERM;			\
$(am__tty_colors);					\
xfailed=PASS;						\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    xfailed=XFAIL;;					\
esac;							\
case $$estatus:$$xfailed in				\
    0:XFAIL) col=$$red; res=XPASS;;			\
    0:*)     col=$$grn; res=PASS ;;			\
    77:*)    col=$$blu; res=SKIP ;;			\
    99:*)    col=$$red; res=FAIL ;;			\
    *:XFAIL) col=$$lgn; res=XFAIL;;			\
    *:*)     col=$$red; res=FAIL ;;			\
esac;							\
echo "$${col}$$res$${std}: $$f";			\
echo "$$res: $$f (exit: $$estatus)" |			\
  $(am__rst_section) >$@;				\
cat $@-t >>$@;						\
rm -f $@-t

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__sh_e_setup);						\
	list='$(TEST_LOGS)';						\
	results=`for f in $$list; do					\
		   read line < $$f && echo "$$line" || echo FAIL;	\
		 done`;							\
	all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[	 ]*//'`; \
	fail=`echo "$$results" | grep -c '^FAIL'`;			\
	pass=`echo "$$results" | grep -c '^PASS'`;			\
	skip=`echo "$$results" | grep -c '^SKIP'`;			\
	xfail=`echo "$$results" | grep -c '^XFAIL'`;			\
	xpass=`echo "$$results" | grep -c '^XPASS'`;			\
	failures=`expr $$fail + $$xpass`;				\
	all=`expr $$all - $$skip`;					\
	if test "$$all" -eq 1; then tests=test; All=;			\
	else tests=tests; All="All "; fi;				\
	case fail=$$fail:xpass=$$xpass:xfail=$$xfail in			\
	  fail=0:xpass=0:xfail=0)					\
	    msg="$$All$$all $$tests passed.  ";				\
	    exit=true;;							\
	  fail=0:xpass=0:xfail=*)					\
	    msg="$$All$$all $$tests behaved as expected";		\
	    if test "$$xfail" -eq 1; then xfailures=failure;		\
	    else xfailures=failures; fi;				\
	    msg="$$msg ($$xfail expected $$xfailures).  ";		\
	    exit=true;;							\
	  fail=*:xpass=0:xfail=*)					\
	    msg="$$fail of $$all $$tests failed.  ";			\
	    exit=false;;						\
	  fail=*:xpass=*:xfail=*)					\
	    msg="$$failures of $$all $$tests did not behave as expected"; \
	    if test "$$xpass" -eq 1; then xpasses=pass;			\
	    else xpasses=passes; fi;					\
	    msg="$$msg ($$xpass unexpected $$xpasses).  ";		\
	    exit=false;;						\
	  *)								\
	    echo >&2 "incorrect case"; exit 4;;				\
	esac;								\
	if test "$$skip" -ne 0; then					\
	  if test "$$skip" -eq 1; then					\
	    msg="$$msg($$skip test was not run).  ";			\
	  else								\
	    msg="$$msg($$skip tests were not run).  ";			\
	  fi;								\
	fi;								\
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  echo "$$msg";							\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for f in $$list; do						\
	    read line < $$f;						\
	    case $$line in						\
	      PASS:*|XFAIL:*);;						\
	      *) echo; cat $$f;;					\
	    esac;							\
	  done;								\
	} >$(TEST_SUITE_LOG).tmp;					\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if test "$$failures" -ne 0; then				\
	  msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG).  ";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    msg="$${msg}Please report to $(PACKAGE_BUGREPORT).  ";	\
	  fi;								\
	fi;								\
	test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG);	\
	$(am__tty_colors);						\
	if $$exit; then							\
	  echo $(ECHO_N) "$$grn$(ECHO_C)";				\
	 else								\
	  echo $(ECHO_N) "$$red$(ECHO_C)";				\
	fi;								\
	echo "$$msg" | $(am__text_box);					\
	echo $(ECHO_N) "$$std$(ECHO_C)";				\
	$$exit

RECHECK_LOGS = $(TEST_LOGS)

# Run all the tests.
check-TESTS:
## Expand $(RECHECK_LOGS) only once, to avoid exceeding line length limits.
	@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
## We always have to remove TEST_SUITE_LOG, to ensure its rule is run
## in any case even in lazy mode: otherwise, if no test needs rerunning,
## or a prior run plus reruns all happen within the same timestamp
## (can happen with a prior `make TESTS=<subset>'),
## then we get no log output.
## OTOH, this means that, in the rule for `$(TEST_SUITE_LOG)', we
## cannot use `$?' to compute the set of lazily rerun tests, lest
## we rely on .PHONY to work portably.
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@list='$(TEST_LOGS)';						\
	list=`for f in $$list; do					\
	  test .log = $$f || echo $$f;					\
	done | tr '\012\015' '  '`;					\
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$list"

AM_RECURSIVE_TARGETS += check

## -------------- ##
## Produce HTML.  ##
## -------------- ##

.log.html:
	@list='$(RST2HTML) $$RST2HTML rst2html rst2html.py';		\
	for r2h in $$list; do						\
	  if ($$r2h --version) >/dev/null 2>&1; then			\
	    R2H=$$r2h;							\
	  fi;								\
	done;								\
	if test -z "$$R2H"; then					\
	  echo >&2 "cannot find rst2html, cannot create $@";		\
	  exit 2;							\
	fi;								\
	$$R2H $< >$@.tmp
	@mv $@.tmp $@

# Be sure to run check first, and then to convert the result.
# Beware of concurrent executions.  Run "check" not "check-TESTS", as
# check-SCRIPTS and other dependencies are rebuilt by the former only.
# And expect check to fail.
check-html:
	@if $(MAKE) $(AM_MAKEFLAGS) check; then			\
	  rv=0; else rv=$$?;					\
	fi;							\
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) || exit 4;	\
	exit $$rv

.PHONY: check-html
.MAKE: check-html

AM_RECURSIVE_TARGETS += check-html

## -------------------- ##
## Rechecking failures. ##
## -------------------- ##

## Rerun all FAILed or XPASSed tests.
recheck recheck-html:
	@target=`echo $@ | sed 's,^re,,'`;				\
	list='$(TEST_LOGS)';						\
	list=`for f in $$list; do					\
	        test -f $$f || continue;				\
	        if read line < $$f; then				\
	          case $$line in FAIL*|XPASS*) echo $$f;; esac;		\
	        else echo $$f; fi;					\
	      done | tr '\012\015' '  '`;				\
	$(MAKE) $(AM_MAKEFLAGS) $$target AM_MAKEFLAGS='$(AM_MAKEFLAGS) TEST_LOGS="'"$$list"'"'

.PHONY: recheck recheck-html
.MAKE: recheck recheck-html

AM_RECURSIVE_TARGETS += recheck recheck-html

else !%?PARALLEL_TESTS%

check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
## Make sure Solaris VPATH-expands all members of this list, even
## the first and the last one; thus the spaces around $(TESTS)
	list=' $(TESTS) '; \
	$(am__tty_colors); \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
## Note: Solaris 2.7 seems to expand TESTS using VPATH.  That's
## why we also try `dir='
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
## Success
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		col=$$red; res=XPASS; \
	      ;; \
	      *) \
		col=$$grn; res=PASS; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
## Failure
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xfail=`expr $$xfail + 1`; \
		col=$$lgn; res=XFAIL; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		col=$$red; res=FAIL; \
	      ;; \
	      esac; \
	    else \
## Skipped
	      skip=`expr $$skip + 1`; \
	      col=$$blu; res=SKIP; \
	    fi; \
	    echo "$${col}$$res$${std}: $$tst"; \
	  done; \
## Prepare the banner
	  if test "$$all" -eq 1; then \
	    tests="test"; \
	    All=""; \
	  else \
	    tests="tests"; \
	    All="All "; \
	  fi; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="$$All$$all $$tests passed"; \
	    else \
	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all $$tests failed"; \
	    else \
	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
	    fi; \
	  fi; \
## DASHES should contain the largest line of the banner.
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    if test "$$skip" -eq 1; then \
	      skipped="($$skip test was not run)"; \
	    else \
	      skipped="($$skip tests were not run)"; \
	    fi; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  if test "$$failed" -eq 0; then \
	    echo "$$grn$$dashes"; \
	  else \
	    echo "$$red$$dashes"; \
	  fi; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes$$std"; \
	  test "$$failed" -eq 0; \
	else :; fi

endif !%?PARALLEL_TESTS%