| diff -Naur newlib-1.17.0/COPYING.LIBGLOSS newlib-1.17.0-new/COPYING.LIBGLOSS |
| --- newlib-1.17.0/COPYING.LIBGLOSS 2008-12-18 00:16:07.000000000 +0100 |
| +++ newlib-1.17.0-new/COPYING.LIBGLOSS 2009-05-22 09:57:49.000000000 +0200 |
| @@ -228,3 +228,33 @@ |
| LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| SUCH DAMAGE. |
| + |
| +(13) Atmel Corporation (avr32 targets only) |
| +Copyright (c) 2006, Atmel Corporation All rights reserved. |
| + |
| +Redistribution and use in source and binary forms, with or without |
| +modification, are permitted provided that the following conditions are met: |
| + |
| +1. Redistributions of source code must retain the above copyright notice, |
| +this list of conditions and the following disclaimer. |
| + |
| +2. Redistributions in binary form must reproduce the above copyright notice, |
| +this list of conditions and the following disclaimer in the documentation |
| +and/or other materials provided with the distribution. |
| + |
| +3. The name of ATMEL may not be used to endorse or promote products |
| +derived from this software without specific prior written permission. |
| + |
| +THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS |
| +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| +PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY |
| +DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, |
| +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY |
| +WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| +POSSIBILITY OF SUCH DAMAGE. |
| diff -Naur newlib-1.17.0/COPYING.NEWLIB newlib-1.17.0-new/COPYING.NEWLIB |
| --- newlib-1.17.0/COPYING.NEWLIB 2008-12-18 00:16:07.000000000 +0100 |
| +++ newlib-1.17.0-new/COPYING.NEWLIB 2009-05-22 09:57:49.000000000 +0200 |
| @@ -767,3 +767,33 @@ |
| LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| SUCH DAMAGE. |
| + |
| +(35) Atmel Corporation (avr32 targets only) |
| +Copyright (c) 2006, Atmel Corporation All rights reserved. |
| + |
| +Redistribution and use in source and binary forms, with or without |
| +modification, are permitted provided that the following conditions are met: |
| + |
| +1. Redistributions of source code must retain the above copyright notice, |
| +this list of conditions and the following disclaimer. |
| + |
| +2. Redistributions in binary form must reproduce the above copyright notice, |
| +this list of conditions and the following disclaimer in the documentation |
| +and/or other materials provided with the distribution. |
| + |
| +3. The name of ATMEL may not be used to endorse or promote products |
| +derived from this software without specific prior written permission. |
| + |
| +THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS |
| +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| +PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY |
| +DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, |
| +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY |
| +WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| +POSSIBILITY OF SUCH DAMAGE. |
| diff -Naur newlib-1.17.0/newlib/configure.host newlib-1.17.0-new/newlib/configure.host |
| --- newlib-1.17.0/newlib/configure.host 2008-12-18 00:09:09.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/configure.host 2009-05-22 09:57:49.000000000 +0200 |
| @@ -99,6 +99,10 @@ |
| arm) |
| machine_dir=arm |
| ;; |
| + avr32*) |
| + machine_dir=avr32 |
| + newlib_cflags="${newlib_cflags} -ffunction-sections" |
| + ;; |
| avr*) |
| newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues" |
| ;; |
| @@ -365,6 +369,9 @@ |
| crx*) |
| sys_dir= |
| ;; |
| + avr32-*-*) |
| + sys_dir=avr32 |
| + ;; |
| d10v*) |
| sys_dir=d10v |
| ;; |
| @@ -575,6 +582,10 @@ |
| arc*) |
| newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED" |
| ;; |
| + avr32*) |
| + syscall_dir=syscalls |
| + newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM" |
| + ;; |
| avr*) |
| newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES" |
| ;; |
| diff -Naur newlib-1.17.0/newlib/libc/include/machine/ieeefp.h newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h |
| --- newlib-1.17.0/newlib/libc/include/machine/ieeefp.h 2008-12-11 21:05:38.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h 2009-05-22 09:57:49.000000000 +0200 |
| @@ -275,6 +275,10 @@ |
| #define _DOUBLE_IS_32BITS |
| #endif |
| |
| +#ifdef __AVR32__ |
| +#define __IEEE_BIG_ENDIAN |
| +#endif |
| + |
| #if defined(__or32__) || defined(__or1k__) || defined(__or16__) |
| #define __IEEE_BIG_ENDIAN |
| #endif |
| diff -Naur newlib-1.17.0/newlib/libc/include/machine/setjmp.h newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h |
| --- newlib-1.17.0/newlib/libc/include/machine/setjmp.h 2008-12-11 21:05:38.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h 2009-05-22 09:57:49.000000000 +0200 |
| @@ -13,6 +13,13 @@ |
| #define _JBLEN 24 |
| #endif |
| |
| +#if defined(__AVR32__) |
| +/* |
| + r0-r7, lr, sp |
| + */ |
| +#define _JBLEN 10 |
| +#endif |
| + |
| #ifdef __sparc__ |
| /* |
| * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext). |
| diff -Naur newlib-1.17.0/newlib/libc/include/machine/time.h newlib-1.17.0-new/newlib/libc/include/machine/time.h |
| --- newlib-1.17.0/newlib/libc/include/machine/time.h 2000-12-04 20:06:37.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/include/machine/time.h 2009-05-22 09:57:49.000000000 +0200 |
| @@ -6,6 +6,10 @@ |
| #else /* !__rtems__ */ |
| #if defined(__arm__) || defined(__thumb__) |
| #define _CLOCKS_PER_SEC_ 100 |
| +#else |
| +#if defined(__AVR32__) |
| +#define _CLOCKS_PER_SEC_ 1000000 |
| +#endif |
| #endif |
| #endif /* !__rtems__ */ |
| |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4 |
| --- newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4 2009-05-22 09:57:49.000000000 +0200 |
| @@ -0,0 +1,382 @@ |
| +dnl aclocal.m4 generated automatically by aclocal 1.4-p6 |
| + |
| +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. |
| +dnl This file is free software; the Free Software Foundation |
| +dnl gives unlimited permission to copy and/or distribute it, |
| +dnl with or without modifications, as long as this notice is preserved. |
| + |
| +dnl This program is distributed in the hope that it will be useful, |
| +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| +dnl PARTICULAR PURPOSE. |
| + |
| +dnl This provides configure definitions used by all the newlib |
| +dnl configure.in files. |
| + |
| +dnl Basic newlib configury. This calls basic introductory stuff, |
| +dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs |
| +dnl configure.host. The only argument is the relative path to the top |
| +dnl newlib directory. |
| + |
| +AC_DEFUN(NEWLIB_CONFIGURE, |
| +[ |
| +dnl Default to --enable-multilib |
| +AC_ARG_ENABLE(multilib, |
| +[ --enable-multilib build many library versions (default)], |
| +[case "${enableval}" in |
| + yes) multilib=yes ;; |
| + no) multilib=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; |
| + esac], [multilib=yes])dnl |
| + |
| +dnl Support --enable-target-optspace |
| +AC_ARG_ENABLE(target-optspace, |
| +[ --enable-target-optspace optimize for space], |
| +[case "${enableval}" in |
| + yes) target_optspace=yes ;; |
| + no) target_optspace=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; |
| + esac], [target_optspace=])dnl |
| + |
| +dnl Support --enable-malloc-debugging - currently only supported for Cygwin |
| +AC_ARG_ENABLE(malloc-debugging, |
| +[ --enable-malloc-debugging indicate malloc debugging requested], |
| +[case "${enableval}" in |
| + yes) malloc_debugging=yes ;; |
| + no) malloc_debugging=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; |
| + esac], [malloc_debugging=])dnl |
| + |
| +dnl Support --enable-newlib-mb |
| +AC_ARG_ENABLE(newlib-mb, |
| +[ --enable-newlib-mb enable multibyte support], |
| +[case "${enableval}" in |
| + yes) newlib_mb=yes ;; |
| + no) newlib_mb=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;; |
| + esac], [newlib_mb=])dnl |
| + |
| +dnl Support --enable-newlib-iconv |
| +AC_ARG_ENABLE(newlib-iconv, |
| +[ --enable-newlib-iconv enable iconv library support], |
| +[case "${enableval}" in |
| + yes) newlib_iconv=yes ;; |
| + no) newlib_iconv=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; |
| + esac], [newlib_iconv=])dnl |
| + |
| +dnl Support --enable-newlib-builtin-converters |
| +AC_ARG_ENABLE(newlib-builtin-converters, |
| +[ --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in], |
| +[if test x${enableval} = x; then |
| + AC_MSG_ERROR(bad value ${enableval} for newlib-builtin-converters option - use comma-separated list) |
| + fi |
| + builtin_converters=${enableval} |
| + ], [builtin_converters=])dnl |
| + |
| +dnl Support --enable-newlib-multithread |
| +AC_ARG_ENABLE(newlib-multithread, |
| +[ --enable-newlib-multithread enable support for multiple threads], |
| +[case "${enableval}" in |
| + yes) newlib_multithread=yes ;; |
| + no) newlib_multithread=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; |
| + esac], [newlib_multithread=yes])dnl |
| + |
| +dnl Support --enable-newlib-elix-level |
| +AC_ARG_ENABLE(newlib-elix-level, |
| +[ --enable-newlib-elix-level supply desired elix library level (1-4)], |
| +[case "${enableval}" in |
| + 0) newlib_elix_level=0 ;; |
| + 1) newlib_elix_level=1 ;; |
| + 2) newlib_elix_level=2 ;; |
| + 3) newlib_elix_level=3 ;; |
| + 4) newlib_elix_level=4 ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; |
| + esac], [newlib_elix_level=0])dnl |
| + |
| +dnl Support --disable-newlib-io-float |
| +AC_ARG_ENABLE(newlib-io-float, |
| +[ --disable-newlib-io-float disable printf/scanf family float support], |
| +[case "${enableval}" in |
| + yes) newlib_io_float=yes ;; |
| + no) newlib_io_float=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; |
| + esac], [newlib_io_float=yes])dnl |
| + |
| +dnl Support --disable-newlib-supplied-syscalls |
| +AC_ARG_ENABLE(newlib-supplied-syscalls, |
| +[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], |
| +[case "${enableval}" in |
| + yes) newlib_may_supply_syscalls=yes ;; |
| + no) newlib_may_supply_syscalls=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; |
| + esac], [newlib_may_supply_syscalls=yes])dnl |
| + |
| +AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) |
| + |
| +dnl We may get other options which we don't document: |
| +dnl --with-target-subdir, --with-multisrctop, --with-multisubdir |
| + |
| +test -z "[$]{with_target_subdir}" && with_target_subdir=. |
| + |
| +if test "[$]{srcdir}" = "."; then |
| + if test "[$]{with_target_subdir}" != "."; then |
| + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" |
| + else |
| + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" |
| + fi |
| +else |
| + newlib_basedir="[$]{srcdir}/$1" |
| +fi |
| +AC_SUBST(newlib_basedir) |
| + |
| +AC_CANONICAL_SYSTEM |
| + |
| +AM_INIT_AUTOMAKE(newlib, 1.12.0) |
| + |
| +# FIXME: We temporarily define our own version of AC_PROG_CC. This is |
| +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
| +# are probably using a cross compiler, which will not be able to fully |
| +# link an executable. This should really be fixed in autoconf |
| +# itself. |
| + |
| +AC_DEFUN(LIB_AC_PROG_CC, |
| +[AC_BEFORE([$0], [AC_PROG_CPP])dnl |
| +AC_CHECK_PROG(CC, gcc, gcc) |
| +if test -z "$CC"; then |
| + AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) |
| + test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) |
| +fi |
| + |
| +AC_PROG_CC_GNU |
| + |
| +if test $ac_cv_prog_gcc = yes; then |
| + GCC=yes |
| +dnl Check whether -g works, even if CFLAGS is set, in case the package |
| +dnl plays around with CFLAGS (such as to build both debugging and |
| +dnl normal versions of a library), tasteless as that idea is. |
| + ac_test_CFLAGS="${CFLAGS+set}" |
| + ac_save_CFLAGS="$CFLAGS" |
| + CFLAGS= |
| + AC_PROG_CC_G |
| + if test "$ac_test_CFLAGS" = set; then |
| + CFLAGS="$ac_save_CFLAGS" |
| + elif test $ac_cv_prog_cc_g = yes; then |
| + CFLAGS="-g -O2" |
| + else |
| + CFLAGS="-O2" |
| + fi |
| +else |
| + GCC= |
| + test "${CFLAGS+set}" = set || CFLAGS="-g" |
| +fi |
| +]) |
| + |
| +LIB_AC_PROG_CC |
| + |
| +AC_CHECK_TOOL(AS, as) |
| +AC_CHECK_TOOL(AR, ar) |
| +AC_CHECK_TOOL(RANLIB, ranlib, :) |
| + |
| +AC_PROG_INSTALL |
| + |
| +AM_MAINTAINER_MODE |
| + |
| +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, |
| +# at least currently, we never actually build a program, so we never |
| +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally |
| +# fails, because we are probably configuring with a cross compiler |
| +# which can't create executables. So we include AC_EXEEXT to keep |
| +# automake happy, but we don't execute it, since we don't care about |
| +# the result. |
| +if false; then |
| + AC_EXEEXT |
| +fi |
| + |
| +. [$]{newlib_basedir}/configure.host |
| + |
| +newlib_cflags="[$]{newlib_cflags} -fno-builtin" |
| + |
| +NEWLIB_CFLAGS=${newlib_cflags} |
| +AC_SUBST(NEWLIB_CFLAGS) |
| + |
| +LDFLAGS=${ldflags} |
| +AC_SUBST(LDFLAGS) |
| + |
| +AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) |
| +AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) |
| +AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) |
| +AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) |
| +AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) |
| + |
| +AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) |
| + |
| +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we |
| +# use oext, which is set in configure.host based on the target platform. |
| +OBJEXT=${oext} |
| + |
| +AC_SUBST(OBJEXT) |
| +AC_SUBST(oext) |
| +AC_SUBST(aext) |
| + |
| +AC_SUBST(libm_machine_dir) |
| +AC_SUBST(machine_dir) |
| +AC_SUBST(sys_dir) |
| +]) |
| + |
| +# Do all the work for Automake. This macro actually does too much -- |
| +# some checks are only needed if your package does certain things. |
| +# But this isn't really a big deal. |
| + |
| +# serial 1 |
| + |
| +dnl Usage: |
| +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) |
| + |
| +AC_DEFUN([AM_INIT_AUTOMAKE], |
| +[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl |
| +AC_REQUIRE([AC_PROG_INSTALL]) |
| +PACKAGE=[$1] |
| +AC_SUBST(PACKAGE) |
| +VERSION=[$2] |
| +AC_SUBST(VERSION) |
| +dnl test to see if srcdir already configured |
| +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then |
| + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) |
| +fi |
| +ifelse([$3],, |
| +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) |
| +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) |
| +AC_REQUIRE([AM_SANITY_CHECK]) |
| +AC_REQUIRE([AC_ARG_PROGRAM]) |
| +dnl FIXME This is truly gross. |
| +missing_dir=`cd $ac_aux_dir && pwd` |
| +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) |
| +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) |
| +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) |
| +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) |
| +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) |
| +AC_REQUIRE([AC_PROG_MAKE_SET])]) |
| + |
| +# Copyright 2002 Free Software Foundation, Inc. |
| + |
| +# This program is free software; you can redistribute it and/or modify |
| +# it under the terms of the GNU General Public License as published by |
| +# the Free Software Foundation; either version 2, or (at your option) |
| +# any later version. |
| + |
| +# This program is distributed in the hope that it will be useful, |
| +# but WITHOUT ANY WARRANTY; without even the implied warranty of |
| +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| +# GNU General Public License for more details. |
| + |
| +# You should have received a copy of the GNU General Public License |
| +# along with this program; if not, write to the Free Software |
| +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| + |
| +# AM_AUTOMAKE_VERSION(VERSION) |
| +# ---------------------------- |
| +# Automake X.Y traces this macro to ensure aclocal.m4 has been |
| +# generated from the m4 files accompanying Automake X.Y. |
| +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) |
| + |
| +# AM_SET_CURRENT_AUTOMAKE_VERSION |
| +# ------------------------------- |
| +# Call AM_AUTOMAKE_VERSION so it can be traced. |
| +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. |
| +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], |
| + [AM_AUTOMAKE_VERSION([1.4-p6])]) |
| + |
| +# |
| +# Check to make sure that the build environment is sane. |
| +# |
| + |
| +AC_DEFUN([AM_SANITY_CHECK], |
| +[AC_MSG_CHECKING([whether build environment is sane]) |
| +# Just in case |
| +sleep 1 |
| +echo timestamp > conftestfile |
| +# Do `set' in a subshell so we don't clobber the current shell's |
| +# arguments. Must try -L first in case configure is actually a |
| +# symlink; some systems play weird games with the mod time of symlinks |
| +# (eg FreeBSD returns the mod time of the symlink's containing |
| +# directory). |
| +if ( |
| + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` |
| + if test "[$]*" = "X"; then |
| + # -L didn't work. |
| + set X `ls -t $srcdir/configure conftestfile` |
| + fi |
| + if test "[$]*" != "X $srcdir/configure conftestfile" \ |
| + && test "[$]*" != "X conftestfile $srcdir/configure"; then |
| + |
| + # If neither matched, then we have a broken ls. This can happen |
| + # if, for instance, CONFIG_SHELL is bash and it inherits a |
| + # broken ls alias from the environment. This has actually |
| + # happened. Such a system could not be considered "sane". |
| + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken |
| +alias in your environment]) |
| + fi |
| + |
| + test "[$]2" = conftestfile |
| + ) |
| +then |
| + # Ok. |
| + : |
| +else |
| + AC_MSG_ERROR([newly created file is older than distributed files! |
| +Check your system clock]) |
| +fi |
| +rm -f conftest* |
| +AC_MSG_RESULT(yes)]) |
| + |
| +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) |
| +dnl The program must properly implement --version. |
| +AC_DEFUN([AM_MISSING_PROG], |
| +[AC_MSG_CHECKING(for working $2) |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if ($2 --version) < /dev/null > /dev/null 2>&1; then |
| + $1=$2 |
| + AC_MSG_RESULT(found) |
| +else |
| + $1="$3/missing $2" |
| + AC_MSG_RESULT(missing) |
| +fi |
| +AC_SUBST($1)]) |
| + |
| +# Define a conditional. |
| + |
| +AC_DEFUN([AM_CONDITIONAL], |
| +[AC_SUBST($1_TRUE) |
| +AC_SUBST($1_FALSE) |
| +if $2; then |
| + $1_TRUE= |
| + $1_FALSE='#' |
| +else |
| + $1_TRUE='#' |
| + $1_FALSE= |
| +fi]) |
| + |
| +# Add --enable-maintainer-mode option to configure. |
| +# From Jim Meyering |
| + |
| +# serial 1 |
| + |
| +AC_DEFUN([AM_MAINTAINER_MODE], |
| +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) |
| + dnl maintainer-mode is disabled by default |
| + AC_ARG_ENABLE(maintainer-mode, |
| +[ --enable-maintainer-mode enable make rules and dependencies not useful |
| + (and sometimes confusing) to the casual installer], |
| + USE_MAINTAINER_MODE=$enableval, |
| + USE_MAINTAINER_MODE=no) |
| + AC_MSG_RESULT($USE_MAINTAINER_MODE) |
| + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) |
| + MAINT=$MAINTAINER_MODE_TRUE |
| + AC_SUBST(MAINT)dnl |
| +] |
| +) |
| + |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure newlib-1.17.0-new/newlib/libc/machine/avr32/configure |
| --- newlib-1.17.0/newlib/libc/machine/avr32/configure 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure 2009-05-22 09:57:49.000000000 +0200 |
| @@ -0,0 +1,3950 @@ |
| +#! /bin/sh |
| +# Guess values for system-dependent variables and create Makefiles. |
| +# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION. |
| +# |
| +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| +# This configure script is free software; the Free Software Foundation |
| +# gives unlimited permission to copy, distribute and modify it. |
| +## --------------------- ## |
| +## M4sh Initialization. ## |
| +## --------------------- ## |
| + |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| +fi |
| + |
| +# Support unset when possible. |
| +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| + as_unset=unset |
| +else |
| + as_unset=false |
| +fi |
| + |
| + |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| +# Work around bugs in pre-3.0 UWIN ksh. |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| +PS1='$ ' |
| +PS2='> ' |
| +PS4='+ ' |
| + |
| +# NLS nuisances. |
| +for as_var in \ |
| + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
| + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
| + LC_TELEPHONE LC_TIME |
| +do |
| + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| + eval $as_var=C; export $as_var |
| + else |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + fi |
| +done |
| + |
| +# Required to use basename. |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| + as_basename=basename |
| +else |
| + as_basename=false |
| +fi |
| + |
| + |
| +# Name of the executable. |
| +as_me=`$as_basename -- "$0" || |
| +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| + X"$0" : 'X\(//\)$' \| \ |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X/"$0" | |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + |
| +# CDPATH. |
| +$as_unset CDPATH |
| + |
| + |
| +if test "x$CONFIG_SHELL" = x; then |
| + if (eval ":") 2>/dev/null; then |
| + as_have_required=yes |
| +else |
| + as_have_required=no |
| +fi |
| + |
| + if test $as_have_required = yes && (eval ": |
| +(as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| + as_lineno_1=\$LINENO |
| + as_lineno_2=\$LINENO |
| + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && |
| + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } |
| +") 2> /dev/null; then |
| + : |
| +else |
| + as_candidate_shells= |
| + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + case $as_dir in |
| + /*) |
| + for as_base in sh bash ksh sh5; do |
| + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" |
| + done;; |
| + esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| + for as_shell in $as_candidate_shells $SHELL; do |
| + # Try only shells that exist, to save several forks. |
| + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && |
| + { ("$as_shell") 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +_ASEOF |
| +}; then |
| + CONFIG_SHELL=$as_shell |
| + as_have_required=yes |
| + if { "$as_shell" 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +(as_func_return () { |
| + (exit $1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = "$1" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test $exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } |
| + |
| +_ASEOF |
| +}; then |
| + break |
| +fi |
| + |
| +fi |
| + |
| + done |
| + |
| + if test "x$CONFIG_SHELL" != x; then |
| + for as_var in BASH_ENV ENV |
| + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + done |
| + export CONFIG_SHELL |
| + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} |
| +fi |
| + |
| + |
| + if test $as_have_required = no; then |
| + echo This script requires a shell more modern than all the |
| + echo shells that I found on your system. Please install a |
| + echo modern shell, or manually run the script under such a |
| + echo shell if you do have one. |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| + |
| +fi |
| + |
| +fi |
| + |
| + |
| + |
| +(eval "as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0") || { |
| + echo No shell found that supports shell functions. |
| + echo Please tell autoconf@gnu.org about your system, |
| + echo including any error possibly output before this |
| + echo message |
| +} |
| + |
| + |
| + |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| + |
| + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| + # uniformly replaced by the line number. The first 'sed' inserts a |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| + sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| + N |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| + t loop |
| + s/-\n.*// |
| + ' >$as_me.lineno && |
| + chmod +x "$as_me.lineno" || |
| + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + # Don't try to exec as it changes $[0], causing all sort of problems |
| + # (the dirname of $[0] is not the place where we might find the |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| + # Exit status is that of the last command. |
| + exit |
| +} |
| + |
| + |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| +esac |
| + |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| +echo >conf$$.file |
| +if ln -s conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| + as_ln_s='cp -p' |
| +elif ln conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s=ln |
| +else |
| + as_ln_s='cp -p' |
| +fi |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| + |
| +if mkdir -p . 2>/dev/null; then |
| + as_mkdir_p=: |
| +else |
| + test -d ./-p && rmdir ./-p |
| + as_mkdir_p=false |
| +fi |
| + |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| + |
| +# Sed expression to map a string onto a valid CPP name. |
| +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| +# Sed expression to map a string onto a valid variable name. |
| +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| + |
| + |
| +exec 7<&0 </dev/null 6>&1 |
| + |
| +# Name of the host. |
| +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, |
| +# so uname gets run too. |
| +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` |
| + |
| +# |
| +# Initializations. |
| +# |
| +ac_default_prefix=/usr/local |
| +ac_clean_files= |
| +ac_config_libobj_dir=. |
| +LIBOBJS= |
| +cross_compiling=no |
| +subdirs= |
| +MFLAGS= |
| +MAKEFLAGS= |
| +SHELL=${CONFIG_SHELL-/bin/sh} |
| + |
| +# Identity of this package. |
| +PACKAGE_NAME='newlib' |
| +PACKAGE_TARNAME='newlib' |
| +PACKAGE_VERSION='NEWLIB_VERSION' |
| +PACKAGE_STRING='newlib NEWLIB_VERSION' |
| +PACKAGE_BUGREPORT='' |
| + |
| +ac_unique_file="Makefile.am" |
| +ac_subst_vars='SHELL |
| +PATH_SEPARATOR |
| +PACKAGE_NAME |
| +PACKAGE_TARNAME |
| +PACKAGE_VERSION |
| +PACKAGE_STRING |
| +PACKAGE_BUGREPORT |
| +exec_prefix |
| +prefix |
| +program_transform_name |
| +bindir |
| +sbindir |
| +libexecdir |
| +datarootdir |
| +datadir |
| +sysconfdir |
| +sharedstatedir |
| +localstatedir |
| +includedir |
| +oldincludedir |
| +docdir |
| +infodir |
| +htmldir |
| +dvidir |
| +pdfdir |
| +psdir |
| +libdir |
| +localedir |
| +mandir |
| +DEFS |
| +ECHO_C |
| +ECHO_N |
| +ECHO_T |
| +LIBS |
| +build_alias |
| +host_alias |
| +target_alias |
| +MAY_SUPPLY_SYSCALLS_TRUE |
| +MAY_SUPPLY_SYSCALLS_FALSE |
| +newlib_basedir |
| +build |
| +build_cpu |
| +build_vendor |
| +build_os |
| +host |
| +host_cpu |
| +host_vendor |
| +host_os |
| +target |
| +target_cpu |
| +target_vendor |
| +target_os |
| +INSTALL_PROGRAM |
| +INSTALL_SCRIPT |
| +INSTALL_DATA |
| +PACKAGE |
| +VERSION |
| +ACLOCAL |
| +AUTOCONF |
| +AUTOMAKE |
| +AUTOHEADER |
| +MAKEINFO |
| +SET_MAKE |
| +CC |
| +AS |
| +AR |
| +RANLIB |
| +MAINTAINER_MODE_TRUE |
| +MAINTAINER_MODE_FALSE |
| +MAINT |
| +NEWLIB_CFLAGS |
| +LDFLAGS |
| +ELIX_LEVEL_0_TRUE |
| +ELIX_LEVEL_0_FALSE |
| +ELIX_LEVEL_1_TRUE |
| +ELIX_LEVEL_1_FALSE |
| +ELIX_LEVEL_2_TRUE |
| +ELIX_LEVEL_2_FALSE |
| +ELIX_LEVEL_3_TRUE |
| +ELIX_LEVEL_3_FALSE |
| +ELIX_LEVEL_4_TRUE |
| +ELIX_LEVEL_4_FALSE |
| +USE_LIBTOOL_TRUE |
| +USE_LIBTOOL_FALSE |
| +OBJEXT |
| +oext |
| +aext |
| +libm_machine_dir |
| +machine_dir |
| +sys_dir |
| +LIBOBJS |
| +LTLIBOBJS' |
| +ac_subst_files='' |
| + ac_precious_vars='build_alias |
| +host_alias |
| +target_alias' |
| + |
| + |
| +# Initialize some variables set by options. |
| +ac_init_help= |
| +ac_init_version=false |
| +# The variables have the same names as the options, with |
| +# dashes changed to underlines. |
| +cache_file=/dev/null |
| +exec_prefix=NONE |
| +no_create= |
| +no_recursion= |
| +prefix=NONE |
| +program_prefix=NONE |
| +program_suffix=NONE |
| +program_transform_name=s,x,x, |
| +silent= |
| +site= |
| +srcdir= |
| +verbose= |
| +x_includes=NONE |
| +x_libraries=NONE |
| + |
| +# Installation directory options. |
| +# These are left unexpanded so users can "make install exec_prefix=/foo" |
| +# and all the variables that are supposed to be based on exec_prefix |
| +# by default will actually change. |
| +# Use braces instead of parens because sh, perl, etc. also accept them. |
| +# (The list follows the same order as the GNU Coding Standards.) |
| +bindir='${exec_prefix}/bin' |
| +sbindir='${exec_prefix}/sbin' |
| +libexecdir='${exec_prefix}/libexec' |
| +datarootdir='${prefix}/share' |
| +datadir='${datarootdir}' |
| +sysconfdir='${prefix}/etc' |
| +sharedstatedir='${prefix}/com' |
| +localstatedir='${prefix}/var' |
| +includedir='${prefix}/include' |
| +oldincludedir='/usr/include' |
| +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' |
| +infodir='${datarootdir}/info' |
| +htmldir='${docdir}' |
| +dvidir='${docdir}' |
| +pdfdir='${docdir}' |
| +psdir='${docdir}' |
| +libdir='${exec_prefix}/lib' |
| +localedir='${datarootdir}/locale' |
| +mandir='${datarootdir}/man' |
| + |
| +ac_prev= |
| +ac_dashdash= |
| +for ac_option |
| +do |
| + # If the previous option needs an argument, assign it. |
| + if test -n "$ac_prev"; then |
| + eval $ac_prev=\$ac_option |
| + ac_prev= |
| + continue |
| + fi |
| + |
| + case $ac_option in |
| + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; |
| + *) ac_optarg=yes ;; |
| + esac |
| + |
| + # Accept the important Cygnus configure options, so we can diagnose typos. |
| + |
| + case $ac_dashdash$ac_option in |
| + --) |
| + ac_dashdash=yes ;; |
| + |
| + -bindir | --bindir | --bindi | --bind | --bin | --bi) |
| + ac_prev=bindir ;; |
| + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
| + bindir=$ac_optarg ;; |
| + |
| + -build | --build | --buil | --bui | --bu) |
| + ac_prev=build_alias ;; |
| + -build=* | --build=* | --buil=* | --bui=* | --bu=*) |
| + build_alias=$ac_optarg ;; |
| + |
| + -cache-file | --cache-file | --cache-fil | --cache-fi \ |
| + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
| + ac_prev=cache_file ;; |
| + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
| + cache_file=$ac_optarg ;; |
| + |
| + --config-cache | -C) |
| + cache_file=config.cache ;; |
| + |
| + -datadir | --datadir | --datadi | --datad) |
| + ac_prev=datadir ;; |
| + -datadir=* | --datadir=* | --datadi=* | --datad=*) |
| + datadir=$ac_optarg ;; |
| + |
| + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ |
| + | --dataroo | --dataro | --datar) |
| + ac_prev=datarootdir ;; |
| + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ |
| + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) |
| + datarootdir=$ac_optarg ;; |
| + |
| + -disable-* | --disable-*) |
| + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=no ;; |
| + |
| + -docdir | --docdir | --docdi | --doc | --do) |
| + ac_prev=docdir ;; |
| + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) |
| + docdir=$ac_optarg ;; |
| + |
| + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) |
| + ac_prev=dvidir ;; |
| + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) |
| + dvidir=$ac_optarg ;; |
| + |
| + -enable-* | --enable-*) |
| + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=\$ac_optarg ;; |
| + |
| + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| + | --exec | --exe | --ex) |
| + ac_prev=exec_prefix ;; |
| + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| + | --exec=* | --exe=* | --ex=*) |
| + exec_prefix=$ac_optarg ;; |
| + |
| + -gas | --gas | --ga | --g) |
| + # Obsolete; use --with-gas. |
| + with_gas=yes ;; |
| + |
| + -help | --help | --hel | --he | -h) |
| + ac_init_help=long ;; |
| + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) |
| + ac_init_help=recursive ;; |
| + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) |
| + ac_init_help=short ;; |
| + |
| + -host | --host | --hos | --ho) |
| + ac_prev=host_alias ;; |
| + -host=* | --host=* | --hos=* | --ho=*) |
| + host_alias=$ac_optarg ;; |
| + |
| + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) |
| + ac_prev=htmldir ;; |
| + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ |
| + | --ht=*) |
| + htmldir=$ac_optarg ;; |
| + |
| + -includedir | --includedir | --includedi | --included | --include \ |
| + | --includ | --inclu | --incl | --inc) |
| + ac_prev=includedir ;; |
| + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| + | --includ=* | --inclu=* | --incl=* | --inc=*) |
| + includedir=$ac_optarg ;; |
| + |
| + -infodir | --infodir | --infodi | --infod | --info | --inf) |
| + ac_prev=infodir ;; |
| + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
| + infodir=$ac_optarg ;; |
| + |
| + -libdir | --libdir | --libdi | --libd) |
| + ac_prev=libdir ;; |
| + -libdir=* | --libdir=* | --libdi=* | --libd=*) |
| + libdir=$ac_optarg ;; |
| + |
| + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| + | --libexe | --libex | --libe) |
| + ac_prev=libexecdir ;; |
| + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| + | --libexe=* | --libex=* | --libe=*) |
| + libexecdir=$ac_optarg ;; |
| + |
| + -localedir | --localedir | --localedi | --localed | --locale) |
| + ac_prev=localedir ;; |
| + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) |
| + localedir=$ac_optarg ;; |
| + |
| + -localstatedir | --localstatedir | --localstatedi | --localstated \ |
| + | --localstate | --localstat | --localsta | --localst | --locals) |
| + ac_prev=localstatedir ;; |
| + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) |
| + localstatedir=$ac_optarg ;; |
| + |
| + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
| + ac_prev=mandir ;; |
| + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
| + mandir=$ac_optarg ;; |
| + |
| + -nfp | --nfp | --nf) |
| + # Obsolete; use --without-fp. |
| + with_fp=no ;; |
| + |
| + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| + | --no-cr | --no-c | -n) |
| + no_create=yes ;; |
| + |
| + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
| + no_recursion=yes ;; |
| + |
| + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| + | --oldin | --oldi | --old | --ol | --o) |
| + ac_prev=oldincludedir ;; |
| + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
| + oldincludedir=$ac_optarg ;; |
| + |
| + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
| + ac_prev=prefix ;; |
| + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
| + prefix=$ac_optarg ;; |
| + |
| + -program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| + | --program-pre | --program-pr | --program-p) |
| + ac_prev=program_prefix ;; |
| + -program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
| + program_prefix=$ac_optarg ;; |
| + |
| + -program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| + | --program-suf | --program-su | --program-s) |
| + ac_prev=program_suffix ;; |
| + -program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
| + program_suffix=$ac_optarg ;; |
| + |
| + -program-transform-name | --program-transform-name \ |
| + | --program-transform-nam | --program-transform-na \ |
| + | --program-transform-n | --program-transform- \ |
| + | --program-transform | --program-transfor \ |
| + | --program-transfo | --program-transf \ |
| + | --program-trans | --program-tran \ |
| + | --progr-tra | --program-tr | --program-t) |
| + ac_prev=program_transform_name ;; |
| + -program-transform-name=* | --program-transform-name=* \ |
| + | --program-transform-nam=* | --program-transform-na=* \ |
| + | --program-transform-n=* | --program-transform-=* \ |
| + | --program-transform=* | --program-transfor=* \ |
| + | --program-transfo=* | --program-transf=* \ |
| + | --program-trans=* | --program-tran=* \ |
| + | --progr-tra=* | --program-tr=* | --program-t=*) |
| + program_transform_name=$ac_optarg ;; |
| + |
| + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) |
| + ac_prev=pdfdir ;; |
| + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) |
| + pdfdir=$ac_optarg ;; |
| + |
| + -psdir | --psdir | --psdi | --psd | --ps) |
| + ac_prev=psdir ;; |
| + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) |
| + psdir=$ac_optarg ;; |
| + |
| + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| + | -silent | --silent | --silen | --sile | --sil) |
| + silent=yes ;; |
| + |
| + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
| + ac_prev=sbindir ;; |
| + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| + | --sbi=* | --sb=*) |
| + sbindir=$ac_optarg ;; |
| + |
| + -sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| + | --sharedst | --shareds | --shared | --share | --shar \ |
| + | --sha | --sh) |
| + ac_prev=sharedstatedir ;; |
| + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| + | --sha=* | --sh=*) |
| + sharedstatedir=$ac_optarg ;; |
| + |
| + -site | --site | --sit) |
| + ac_prev=site ;; |
| + -site=* | --site=* | --sit=*) |
| + site=$ac_optarg ;; |
| + |
| + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
| + ac_prev=srcdir ;; |
| + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
| + srcdir=$ac_optarg ;; |
| + |
| + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| + | --syscon | --sysco | --sysc | --sys | --sy) |
| + ac_prev=sysconfdir ;; |
| + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
| + sysconfdir=$ac_optarg ;; |
| + |
| + -target | --target | --targe | --targ | --tar | --ta | --t) |
| + ac_prev=target_alias ;; |
| + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
| + target_alias=$ac_optarg ;; |
| + |
| + -v | -verbose | --verbose | --verbos | --verbo | --verb) |
| + verbose=yes ;; |
| + |
| + -version | --version | --versio | --versi | --vers | -V) |
| + ac_init_version=: ;; |
| + |
| + -with-* | --with-*) |
| + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=\$ac_optarg ;; |
| + |
| + -without-* | --without-*) |
| + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=no ;; |
| + |
| + --x) |
| + # Obsolete; use --with-x. |
| + with_x=yes ;; |
| + |
| + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| + | --x-incl | --x-inc | --x-in | --x-i) |
| + ac_prev=x_includes ;; |
| + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
| + x_includes=$ac_optarg ;; |
| + |
| + -x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
| + ac_prev=x_libraries ;; |
| + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
| + x_libraries=$ac_optarg ;; |
| + |
| + -*) { echo "$as_me: error: unrecognized option: $ac_option |
| +Try \`$0 --help' for more information." >&2 |
| + { (exit 1); exit 1; }; } |
| + ;; |
| + |
| + *=*) |
| + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 |
| + { (exit 1); exit 1; }; } |
| + eval $ac_envvar=\$ac_optarg |
| + export $ac_envvar ;; |
| + |
| + *) |
| + # FIXME: should be removed in autoconf 3.0. |
| + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 |
| + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 |
| + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} |
| + ;; |
| + |
| + esac |
| +done |
| + |
| +if test -n "$ac_prev"; then |
| + ac_option=--`echo $ac_prev | sed 's/_/-/g'` |
| + { echo "$as_me: error: missing argument to $ac_option" >&2 |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +# Be sure to have absolute directory names. |
| +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ |
| + datadir sysconfdir sharedstatedir localstatedir includedir \ |
| + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ |
| + libdir localedir mandir |
| +do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + [\\/$]* | ?:[\\/]* ) continue;; |
| + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; |
| + esac |
| + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| + { (exit 1); exit 1; }; } |
| +done |
| + |
| +# There might be people who depend on the old broken behavior: `$host' |
| +# used to hold the argument of --host etc. |
| +# FIXME: To remove some day. |
| +build=$build_alias |
| +host=$host_alias |
| +target=$target_alias |
| + |
| +# FIXME: To remove some day. |
| +if test "x$host_alias" != x; then |
| + if test "x$build_alias" = x; then |
| + cross_compiling=maybe |
| + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. |
| + If a cross compiler is detected then cross compile mode will be used." >&2 |
| + elif test "x$build_alias" != "x$host_alias"; then |
| + cross_compiling=yes |
| + fi |
| +fi |
| + |
| +ac_tool_prefix= |
| +test -n "$host_alias" && ac_tool_prefix=$host_alias- |
| + |
| +test "$silent" = yes && exec 6>/dev/null |
| + |
| + |
| +ac_pwd=`pwd` && test -n "$ac_pwd" && |
| +ac_ls_di=`ls -di .` && |
| +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || |
| + { echo "$as_me: error: Working directory cannot be determined" >&2 |
| + { (exit 1); exit 1; }; } |
| +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || |
| + { echo "$as_me: error: pwd does not report name of working directory" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + |
| +# Find the source files, if location was not specified. |
| +if test -z "$srcdir"; then |
| + ac_srcdir_defaulted=yes |
| + # Try the directory containing this script, then the parent directory. |
| + ac_confdir=`$as_dirname -- "$0" || |
| +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| + X"$0" : 'X\(//\)[^/]' \| \ |
| + X"$0" : 'X\(//\)$' \| \ |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X"$0" | |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + srcdir=$ac_confdir |
| + if test ! -r "$srcdir/$ac_unique_file"; then |
| + srcdir=.. |
| + fi |
| +else |
| + ac_srcdir_defaulted=no |
| +fi |
| +if test ! -r "$srcdir/$ac_unique_file"; then |
| + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." |
| + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
| + { (exit 1); exit 1; }; } |
| +fi |
| +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" |
| +ac_abs_confdir=`( |
| + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 |
| + { (exit 1); exit 1; }; } |
| + pwd)` |
| +# When building in place, set srcdir=. |
| +if test "$ac_abs_confdir" = "$ac_pwd"; then |
| + srcdir=. |
| +fi |
| +# Remove unnecessary trailing slashes from srcdir. |
| +# Double slashes in file names in object file debugging info |
| +# mess up M-x gdb in Emacs. |
| +case $srcdir in |
| +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; |
| +esac |
| +for ac_var in $ac_precious_vars; do |
| + eval ac_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_env_${ac_var}_value=\$${ac_var} |
| + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_cv_env_${ac_var}_value=\$${ac_var} |
| +done |
| + |
| +# |
| +# Report the --help message. |
| +# |
| +if test "$ac_init_help" = "long"; then |
| + # Omit some internal or obsolete options to make the list less imposing. |
| + # This message is too long to be a string in the A/UX 3.1 sh. |
| + cat <<_ACEOF |
| +\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems. |
| + |
| +Usage: $0 [OPTION]... [VAR=VALUE]... |
| + |
| +To assign environment variables (e.g., CC, CFLAGS...), specify them as |
| +VAR=VALUE. See below for descriptions of some of the useful variables. |
| + |
| +Defaults for the options are specified in brackets. |
| + |
| +Configuration: |
| + -h, --help display this help and exit |
| + --help=short display options specific to this package |
| + --help=recursive display the short help of all the included packages |
| + -V, --version display version information and exit |
| + -q, --quiet, --silent do not print \`checking...' messages |
| + --cache-file=FILE cache test results in FILE [disabled] |
| + -C, --config-cache alias for \`--cache-file=config.cache' |
| + -n, --no-create do not create output files |
| + --srcdir=DIR find the sources in DIR [configure dir or \`..'] |
| + |
| +Installation directories: |
| + --prefix=PREFIX install architecture-independent files in PREFIX |
| + [$ac_default_prefix] |
| + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
| + [PREFIX] |
| + |
| +By default, \`make install' will install all the files in |
| +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify |
| +an installation prefix other than \`$ac_default_prefix' using \`--prefix', |
| +for instance \`--prefix=\$HOME'. |
| + |
| +For better control, use the options below. |
| + |
| +Fine tuning of the installation directories: |
| + --bindir=DIR user executables [EPREFIX/bin] |
| + --sbindir=DIR system admin executables [EPREFIX/sbin] |
| + --libexecdir=DIR program executables [EPREFIX/libexec] |
| + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
| + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
| + --localstatedir=DIR modifiable single-machine data [PREFIX/var] |
| + --libdir=DIR object code libraries [EPREFIX/lib] |
| + --includedir=DIR C header files [PREFIX/include] |
| + --oldincludedir=DIR C header files for non-gcc [/usr/include] |
| + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] |
| + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] |
| + --infodir=DIR info documentation [DATAROOTDIR/info] |
| + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] |
| + --mandir=DIR man documentation [DATAROOTDIR/man] |
| + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] |
| + --htmldir=DIR html documentation [DOCDIR] |
| + --dvidir=DIR dvi documentation [DOCDIR] |
| + --pdfdir=DIR pdf documentation [DOCDIR] |
| + --psdir=DIR ps documentation [DOCDIR] |
| +_ACEOF |
| + |
| + cat <<\_ACEOF |
| + |
| +Program names: |
| + --program-prefix=PREFIX prepend PREFIX to installed program names |
| + --program-suffix=SUFFIX append SUFFIX to installed program names |
| + --program-transform-name=PROGRAM run sed PROGRAM on installed program names |
| + |
| +System types: |
| + --build=BUILD configure for building on BUILD [guessed] |
| + --host=HOST cross-compile to build programs to run on HOST [BUILD] |
| + --target=TARGET configure for building compilers for TARGET [HOST] |
| +_ACEOF |
| +fi |
| + |
| +if test -n "$ac_init_help"; then |
| + case $ac_init_help in |
| + short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";; |
| + esac |
| + cat <<\_ACEOF |
| + |
| +Optional Features: |
| + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
| + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
| + --enable-multilib build many library versions (default) |
| + --enable-target-optspace optimize for space |
| + --enable-malloc-debugging indicate malloc debugging requested |
| + --enable-newlib-mb enable multibyte support |
| + --enable-newlib-iconv enable iconv library support |
| + --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in |
| + --enable-newlib-multithread enable support for multiple threads |
| + --enable-newlib-elix-level supply desired elix library level (1-4) |
| + --disable-newlib-io-float disable printf/scanf family float support |
| + --disable-newlib-supplied-syscalls disable newlib from supplying syscalls |
| + --enable-maintainer-mode enable make rules and dependencies not useful |
| + (and sometimes confusing) to the casual installer |
| + |
| +_ACEOF |
| +ac_status=$? |
| +fi |
| + |
| +if test "$ac_init_help" = "recursive"; then |
| + # If there are subdirs, report their specific --help. |
| + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue |
| + test -d "$ac_dir" || continue |
| + ac_builddir=. |
| + |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| + |
| +case $srcdir in |
| + .) # We are building in place. |
| + ac_srcdir=. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| + ac_srcdir=$srcdir$ac_dir_suffix; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| +esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| + |
| + cd "$ac_dir" || { ac_status=$?; continue; } |
| + # Check for guested configure. |
| + if test -f "$ac_srcdir/configure.gnu"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure.gnu" --help=recursive |
| + elif test -f "$ac_srcdir/configure"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure" --help=recursive |
| + else |
| + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 |
| + fi || ac_status=$? |
| + cd "$ac_pwd" || { ac_status=$?; break; } |
| + done |
| +fi |
| + |
| +test -n "$ac_init_help" && exit $ac_status |
| +if $ac_init_version; then |
| + cat <<\_ACEOF |
| +newlib configure NEWLIB_VERSION |
| +generated by GNU Autoconf 2.61 |
| + |
| +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| +This configure script is free software; the Free Software Foundation |
| +gives unlimited permission to copy, distribute and modify it. |
| +_ACEOF |
| + exit |
| +fi |
| +cat >config.log <<_ACEOF |
| +This file contains any messages produced by compilers while |
| +running configure, to aid debugging if configure makes a mistake. |
| + |
| +It was created by newlib $as_me NEWLIB_VERSION, which was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| + |
| + $ $0 $@ |
| + |
| +_ACEOF |
| +exec 5>>config.log |
| +{ |
| +cat <<_ASUNAME |
| +## --------- ## |
| +## Platform. ## |
| +## --------- ## |
| + |
| +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` |
| +uname -m = `(uname -m) 2>/dev/null || echo unknown` |
| +uname -r = `(uname -r) 2>/dev/null || echo unknown` |
| +uname -s = `(uname -s) 2>/dev/null || echo unknown` |
| +uname -v = `(uname -v) 2>/dev/null || echo unknown` |
| + |
| +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` |
| +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` |
| + |
| +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` |
| +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` |
| +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` |
| +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` |
| +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` |
| +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` |
| +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` |
| + |
| +_ASUNAME |
| + |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + echo "PATH: $as_dir" |
| +done |
| +IFS=$as_save_IFS |
| + |
| +} >&5 |
| + |
| +cat >&5 <<_ACEOF |
| + |
| + |
| +## ----------- ## |
| +## Core tests. ## |
| +## ----------- ## |
| + |
| +_ACEOF |
| + |
| + |
| +# Keep a trace of the command line. |
| +# Strip out --no-create and --no-recursion so they do not pile up. |
| +# Strip out --silent because we don't want to record it for future runs. |
| +# Also quote any args containing shell meta-characters. |
| +# Make two passes to allow for proper duplicate-argument suppression. |
| +ac_configure_args= |
| +ac_configure_args0= |
| +ac_configure_args1= |
| +ac_must_keep_next=false |
| +for ac_pass in 1 2 |
| +do |
| + for ac_arg |
| + do |
| + case $ac_arg in |
| + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; |
| + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| + | -silent | --silent | --silen | --sile | --sil) |
| + continue ;; |
| + *\'*) |
| + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| + esac |
| + case $ac_pass in |
| + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; |
| + 2) |
| + ac_configure_args1="$ac_configure_args1 '$ac_arg'" |
| + if test $ac_must_keep_next = true; then |
| + ac_must_keep_next=false # Got value, back to normal. |
| + else |
| + case $ac_arg in |
| + *=* | --config-cache | -C | -disable-* | --disable-* \ |
| + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ |
| + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ |
| + | -with-* | --with-* | -without-* | --without-* | --x) |
| + case "$ac_configure_args0 " in |
| + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; |
| + esac |
| + ;; |
| + -* ) ac_must_keep_next=true ;; |
| + esac |
| + fi |
| + ac_configure_args="$ac_configure_args '$ac_arg'" |
| + ;; |
| + esac |
| + done |
| +done |
| +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } |
| +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } |
| + |
| +# When interrupted or exit'd, cleanup temporary files, and complete |
| +# config.log. We remove comments because anyway the quotes in there |
| +# would cause problems or look ugly. |
| +# WARNING: Use '\'' to represent an apostrophe within the trap. |
| +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. |
| +trap 'exit_status=$? |
| + # Save into config.log some information that might help in debugging. |
| + { |
| + echo |
| + |
| + cat <<\_ASBOX |
| +## ---------------- ## |
| +## Cache variables. ## |
| +## ---------------- ## |
| +_ASBOX |
| + echo |
| + # The following way of writing the cache mishandles newlines in values, |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| + (set) 2>&1 | |
| + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| + sed -n \ |
| + "s/'\''/'\''\\\\'\'''\''/g; |
| + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" |
| + ;; #( |
| + *) |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| + ;; |
| + esac | |
| + sort |
| +) |
| + echo |
| + |
| + cat <<\_ASBOX |
| +## ----------------- ## |
| +## Output variables. ## |
| +## ----------------- ## |
| +_ASBOX |
| + echo |
| + for ac_var in $ac_subst_vars |
| + do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| + done | sort |
| + echo |
| + |
| + if test -n "$ac_subst_files"; then |
| + cat <<\_ASBOX |
| +## ------------------- ## |
| +## File substitutions. ## |
| +## ------------------- ## |
| +_ASBOX |
| + echo |
| + for ac_var in $ac_subst_files |
| + do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| + done | sort |
| + echo |
| + fi |
| + |
| + if test -s confdefs.h; then |
| + cat <<\_ASBOX |
| +## ----------- ## |
| +## confdefs.h. ## |
| +## ----------- ## |
| +_ASBOX |
| + echo |
| + cat confdefs.h |
| + echo |
| + fi |
| + test "$ac_signal" != 0 && |
| + echo "$as_me: caught signal $ac_signal" |
| + echo "$as_me: exit $exit_status" |
| + } >&5 |
| + rm -f core *.core core.conftest.* && |
| + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && |
| + exit $exit_status |
| +' 0 |
| +for ac_signal in 1 2 13 15; do |
| + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal |
| +done |
| +ac_signal=0 |
| + |
| +# confdefs.h avoids OS command line length limits that DEFS can exceed. |
| +rm -f -r conftest* confdefs.h |
| + |
| +# Predefined preprocessor variables. |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_NAME "$PACKAGE_NAME" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_VERSION "$PACKAGE_VERSION" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_STRING "$PACKAGE_STRING" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" |
| +_ACEOF |
| + |
| + |
| +# Let the site file select an alternate cache file if it wants to. |
| +# Prefer explicitly selected file to automatically selected ones. |
| +if test -n "$CONFIG_SITE"; then |
| + set x "$CONFIG_SITE" |
| +elif test "x$prefix" != xNONE; then |
| + set x "$prefix/share/config.site" "$prefix/etc/config.site" |
| +else |
| + set x "$ac_default_prefix/share/config.site" \ |
| + "$ac_default_prefix/etc/config.site" |
| +fi |
| +shift |
| +for ac_site_file |
| +do |
| + if test -r "$ac_site_file"; then |
| + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 |
| +echo "$as_me: loading site script $ac_site_file" >&6;} |
| + sed 's/^/| /' "$ac_site_file" >&5 |
| + . "$ac_site_file" |
| + fi |
| +done |
| + |
| +if test -r "$cache_file"; then |
| + # Some versions of bash will fail to source /dev/null (special |
| + # files actually), so we avoid doing that. |
| + if test -f "$cache_file"; then |
| + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 |
| +echo "$as_me: loading cache $cache_file" >&6;} |
| + case $cache_file in |
| + [\\/]* | ?:[\\/]* ) . "$cache_file";; |
| + *) . "./$cache_file";; |
| + esac |
| + fi |
| +else |
| + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 |
| +echo "$as_me: creating cache $cache_file" >&6;} |
| + >$cache_file |
| +fi |
| + |
| +# Check that the precious variables saved in the cache have kept the same |
| +# value. |
| +ac_cache_corrupted=false |
| +for ac_var in $ac_precious_vars; do |
| + eval ac_old_set=\$ac_cv_env_${ac_var}_set |
| + eval ac_new_set=\$ac_env_${ac_var}_set |
| + eval ac_old_val=\$ac_cv_env_${ac_var}_value |
| + eval ac_new_val=\$ac_env_${ac_var}_value |
| + case $ac_old_set,$ac_new_set in |
| + set,) |
| + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 |
| +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} |
| + ac_cache_corrupted=: ;; |
| + ,set) |
| + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 |
| +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} |
| + ac_cache_corrupted=: ;; |
| + ,);; |
| + *) |
| + if test "x$ac_old_val" != "x$ac_new_val"; then |
| + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 |
| +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} |
| + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 |
| +echo "$as_me: former value: $ac_old_val" >&2;} |
| + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 |
| +echo "$as_me: current value: $ac_new_val" >&2;} |
| + ac_cache_corrupted=: |
| + fi;; |
| + esac |
| + # Pass precious variables to config.status. |
| + if test "$ac_new_set" = set; then |
| + case $ac_new_val in |
| + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
| + *) ac_arg=$ac_var=$ac_new_val ;; |
| + esac |
| + case " $ac_configure_args " in |
| + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. |
| + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
| + esac |
| + fi |
| +done |
| +if $ac_cache_corrupted; then |
| + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 |
| +echo "$as_me: error: changes in the environment can compromise the build" >&2;} |
| + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 |
| +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| +ac_ext=c |
| +ac_cpp='$CPP $CPPFLAGS' |
| +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| +ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| + |
| + |
| + |
| + |
| +ac_aux_dir= |
| +for ac_dir in ../../../.. "$srcdir"/../../../..; do |
| + if test -f "$ac_dir/install-sh"; then |
| + ac_aux_dir=$ac_dir |
| + ac_install_sh="$ac_aux_dir/install-sh -c" |
| + break |
| + elif test -f "$ac_dir/install.sh"; then |
| + ac_aux_dir=$ac_dir |
| + ac_install_sh="$ac_aux_dir/install.sh -c" |
| + break |
| + elif test -f "$ac_dir/shtool"; then |
| + ac_aux_dir=$ac_dir |
| + ac_install_sh="$ac_aux_dir/shtool install -c" |
| + break |
| + fi |
| +done |
| +if test -z "$ac_aux_dir"; then |
| + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5 |
| +echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +# These three variables are undocumented and unsupported, |
| +# and are intended to be withdrawn in a future Autoconf release. |
| +# They can cause serious problems if a builder's source tree is in a directory |
| +# whose full name contains unusual characters. |
| +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. |
| +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. |
| +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. |
| + |
| + |
| + |
| +# Make sure we can run config.sub. |
| +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || |
| + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 |
| +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} |
| + { (exit 1); exit 1; }; } |
| + |
| +{ echo "$as_me:$LINENO: checking build system type" >&5 |
| +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } |
| +if test "${ac_cv_build+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_build_alias=$build_alias |
| +test "x$ac_build_alias" = x && |
| + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` |
| +test "x$ac_build_alias" = x && |
| + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 |
| +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} |
| + { (exit 1); exit 1; }; } |
| +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} |
| + { (exit 1); exit 1; }; } |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
| +echo "${ECHO_T}$ac_cv_build" >&6; } |
| +case $ac_cv_build in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 |
| +echo "$as_me: error: invalid value of canonical build" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| +build=$ac_cv_build |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_build |
| +shift |
| +build_cpu=$1 |
| +build_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +build_os=$* |
| +IFS=$ac_save_IFS |
| +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking host system type" >&5 |
| +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } |
| +if test "${ac_cv_host+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test "x$host_alias" = x; then |
| + ac_cv_host=$ac_cv_build |
| +else |
| + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
| +echo "${ECHO_T}$ac_cv_host" >&6; } |
| +case $ac_cv_host in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 |
| +echo "$as_me: error: invalid value of canonical host" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| +host=$ac_cv_host |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_host |
| +shift |
| +host_cpu=$1 |
| +host_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +host_os=$* |
| +IFS=$ac_save_IFS |
| +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac |
| + |
| + |
| +am__api_version="1.4" |
| +# Find a good install program. We prefer a C program (faster), |
| +# so one script is as good as another. But avoid the broken or |
| +# incompatible versions: |
| +# SysV /etc/install, /usr/sbin/install |
| +# SunOS /usr/etc/install |
| +# IRIX /sbin/install |
| +# AIX /bin/install |
| +# AmigaOS /C/install, which installs bootblocks on floppy discs |
| +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
| +# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
| +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| +# OS/2's system install, which has a completely different semantic |
| +# ./install, which can be erroneously created by make from ./install.sh. |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| +if test -z "$INSTALL"; then |
| +if test "${ac_cv_path_install+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + # Account for people who put trailing slashes in PATH elements. |
| +case $as_dir/ in |
| + ./ | .// | /cC/* | \ |
| + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
| + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ |
| + /usr/ucb/* ) ;; |
| + *) |
| + # OSF1 and SCO ODT 3.0 have their own names for install. |
| + # Don't use installbsd from OSF since it installs stuff as root |
| + # by default. |
| + for ac_prog in ginstall scoinst install; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| + if test $ac_prog = install && |
| + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # AIX install. It has an incompatible calling convention. |
| + : |
| + elif test $ac_prog = install && |
| + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # program-specific install script used by HP pwplus--don't use. |
| + : |
| + else |
| + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
| + break 3 |
| + fi |
| + fi |
| + done |
| + done |
| + ;; |
| +esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + if test "${ac_cv_path_install+set}" = set; then |
| + INSTALL=$ac_cv_path_install |
| + else |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| + # break other packages using the cache if that directory is |
| + # removed, or if the value is a relative name. |
| + INSTALL=$ac_install_sh |
| + fi |
| +fi |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| + |
| +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| +# It thinks the first close brace ends the variable substitution. |
| +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
| + |
| +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
| + |
| +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
| + |
| +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
| +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } |
| +# Just in case |
| +sleep 1 |
| +echo timestamp > conftestfile |
| +# Do `set' in a subshell so we don't clobber the current shell's |
| +# arguments. Must try -L first in case configure is actually a |
| +# symlink; some systems play weird games with the mod time of symlinks |
| +# (eg FreeBSD returns the mod time of the symlink's containing |
| +# directory). |
| +if ( |
| + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` |
| + if test "$*" = "X"; then |
| + # -L didn't work. |
| + set X `ls -t $srcdir/configure conftestfile` |
| + fi |
| + if test "$*" != "X $srcdir/configure conftestfile" \ |
| + && test "$*" != "X conftestfile $srcdir/configure"; then |
| + |
| + # If neither matched, then we have a broken ls. This can happen |
| + # if, for instance, CONFIG_SHELL is bash and it inherits a |
| + # broken ls alias from the environment. This has actually |
| + # happened. Such a system could not be considered "sane". |
| + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken |
| +alias in your environment" >&5 |
| +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken |
| +alias in your environment" >&2;} |
| + { (exit 1); exit 1; }; } |
| + fi |
| + |
| + test "$2" = conftestfile |
| + ) |
| +then |
| + # Ok. |
| + : |
| +else |
| + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! |
| +Check your system clock" >&5 |
| +echo "$as_me: error: newly created file is older than distributed files! |
| +Check your system clock" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| +rm -f conftest* |
| +{ echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| +test "$program_prefix" != NONE && |
| + program_transform_name="s&^&$program_prefix&;$program_transform_name" |
| +# Use a double $ so make ignores it. |
| +test "$program_suffix" != NONE && |
| + program_transform_name="s&\$&$program_suffix&;$program_transform_name" |
| +# Double any \ or $. echo might interpret backslashes. |
| +# By default was `s,x,x', remove it if useless. |
| +cat <<\_ACEOF >conftest.sed |
| +s/[\\$]/&&/g;s/;s,x,x,$// |
| +_ACEOF |
| +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` |
| +rm -f conftest.sed |
| + |
| +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
| +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } |
| +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` |
| +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + cat >conftest.make <<\_ACEOF |
| +SHELL = /bin/sh |
| +all: |
| + @echo '@@@%%%=$(MAKE)=@@@%%%' |
| +_ACEOF |
| +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. |
| +case `${MAKE-make} -f conftest.make 2>/dev/null` in |
| + *@@@%%%=?*=@@@%%%*) |
| + eval ac_cv_prog_make_${ac_make}_set=yes;; |
| + *) |
| + eval ac_cv_prog_make_${ac_make}_set=no;; |
| +esac |
| +rm -f conftest.make |
| +fi |
| +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| + SET_MAKE= |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| + SET_MAKE="MAKE=${MAKE-make}" |
| +fi |
| + |
| + |
| +# Check whether --enable-multilib was given. |
| +if test "${enable_multilib+set}" = set; then |
| + enableval=$enable_multilib; case "${enableval}" in |
| + yes) multilib=yes ;; |
| + no) multilib=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for multilib option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + multilib=yes |
| +fi |
| + |
| +# Check whether --enable-target-optspace was given. |
| +if test "${enable_target_optspace+set}" = set; then |
| + enableval=$enable_target_optspace; case "${enableval}" in |
| + yes) target_optspace=yes ;; |
| + no) target_optspace=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + target_optspace= |
| +fi |
| + |
| +# Check whether --enable-malloc-debugging was given. |
| +if test "${enable_malloc_debugging+set}" = set; then |
| + enableval=$enable_malloc_debugging; case "${enableval}" in |
| + yes) malloc_debugging=yes ;; |
| + no) malloc_debugging=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + malloc_debugging= |
| +fi |
| + |
| +# Check whether --enable-newlib-mb was given. |
| +if test "${enable_newlib_mb+set}" = set; then |
| + enableval=$enable_newlib_mb; case "${enableval}" in |
| + yes) newlib_mb=yes ;; |
| + no) newlib_mb=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-mb option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-mb option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_mb= |
| +fi |
| + |
| +# Check whether --enable-newlib-iconv was given. |
| +if test "${enable_newlib_iconv+set}" = set; then |
| + enableval=$enable_newlib_iconv; case "${enableval}" in |
| + yes) newlib_iconv=yes ;; |
| + no) newlib_iconv=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_iconv= |
| +fi |
| + |
| +# Check whether --enable-newlib-builtin-converters was given. |
| +if test "${enable_newlib_builtin_converters+set}" = set; then |
| + enableval=$enable_newlib_builtin_converters; if test x${enableval} = x; then |
| + { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&2;} |
| + { (exit 1); exit 1; }; } |
| + fi |
| + builtin_converters=${enableval} |
| + |
| +else |
| + builtin_converters= |
| +fi |
| + |
| +# Check whether --enable-newlib-multithread was given. |
| +if test "${enable_newlib_multithread+set}" = set; then |
| + enableval=$enable_newlib_multithread; case "${enableval}" in |
| + yes) newlib_multithread=yes ;; |
| + no) newlib_multithread=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_multithread=yes |
| +fi |
| + |
| +# Check whether --enable-newlib-elix-level was given. |
| +if test "${enable_newlib_elix_level+set}" = set; then |
| + enableval=$enable_newlib_elix_level; case "${enableval}" in |
| + 0) newlib_elix_level=0 ;; |
| + 1) newlib_elix_level=1 ;; |
| + 2) newlib_elix_level=2 ;; |
| + 3) newlib_elix_level=3 ;; |
| + 4) newlib_elix_level=4 ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_elix_level=0 |
| +fi |
| + |
| +# Check whether --enable-newlib-io-float was given. |
| +if test "${enable_newlib_io_float+set}" = set; then |
| + enableval=$enable_newlib_io_float; case "${enableval}" in |
| + yes) newlib_io_float=yes ;; |
| + no) newlib_io_float=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_io_float=yes |
| +fi |
| + |
| +# Check whether --enable-newlib-supplied-syscalls was given. |
| +if test "${enable_newlib_supplied_syscalls+set}" = set; then |
| + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in |
| + yes) newlib_may_supply_syscalls=yes ;; |
| + no) newlib_may_supply_syscalls=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_may_supply_syscalls=yes |
| +fi |
| + |
| + |
| + |
| +if test x${newlib_may_supply_syscalls} = xyes; then |
| + MAY_SUPPLY_SYSCALLS_TRUE= |
| + MAY_SUPPLY_SYSCALLS_FALSE='#' |
| +else |
| + MAY_SUPPLY_SYSCALLS_TRUE='#' |
| + MAY_SUPPLY_SYSCALLS_FALSE= |
| +fi |
| + |
| + |
| +test -z "${with_target_subdir}" && with_target_subdir=. |
| + |
| +if test "${srcdir}" = "."; then |
| + if test "${with_target_subdir}" != "."; then |
| + newlib_basedir="${srcdir}/${with_multisrctop}../../../.." |
| + else |
| + newlib_basedir="${srcdir}/${with_multisrctop}../../.." |
| + fi |
| +else |
| + newlib_basedir="${srcdir}/../../.." |
| +fi |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking target system type" >&5 |
| +echo $ECHO_N "checking target system type... $ECHO_C" >&6; } |
| +if test "${ac_cv_target+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test "x$target_alias" = x; then |
| + ac_cv_target=$ac_cv_host |
| +else |
| + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 |
| +echo "${ECHO_T}$ac_cv_target" >&6; } |
| +case $ac_cv_target in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 |
| +echo "$as_me: error: invalid value of canonical target" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| +target=$ac_cv_target |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_target |
| +shift |
| +target_cpu=$1 |
| +target_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +target_os=$* |
| +IFS=$ac_save_IFS |
| +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac |
| + |
| + |
| +# The aliases save the names the user supplied, while $host etc. |
| +# will get canonicalized. |
| +test -n "$target_alias" && |
| + test "$program_prefix$program_suffix$program_transform_name" = \ |
| + NONENONEs,x,x, && |
| + program_prefix=${target_alias}- |
| + |
| + |
| +PACKAGE=newlib |
| + |
| +VERSION=1.12.0 |
| + |
| +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then |
| + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 |
| +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE "$PACKAGE" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define VERSION "$VERSION" |
| +_ACEOF |
| + |
| + |
| + |
| +missing_dir=`cd $ac_aux_dir && pwd` |
| +{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 |
| +echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then |
| + ACLOCAL=aclocal-${am__api_version} |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working autoconf" >&5 |
| +echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (autoconf --version) < /dev/null > /dev/null 2>&1; then |
| + AUTOCONF=autoconf |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + AUTOCONF="$missing_dir/missing autoconf" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 |
| +echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then |
| + AUTOMAKE=automake-${am__api_version} |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + AUTOMAKE="$missing_dir/missing automake-${am__api_version}" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working autoheader" >&5 |
| +echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (autoheader --version) < /dev/null > /dev/null 2>&1; then |
| + AUTOHEADER=autoheader |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + AUTOHEADER="$missing_dir/missing autoheader" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working makeinfo" >&5 |
| +echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then |
| + MAKEINFO=makeinfo |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + MAKEINFO="$missing_dir/missing makeinfo" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| + |
| + |
| +# FIXME: We temporarily define our own version of AC_PROG_CC. This is |
| +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
| +# are probably using a cross compiler, which will not be able to fully |
| +# link an executable. This should really be fixed in autoconf |
| +# itself. |
| + |
| + |
| + |
| +# Extract the first word of "gcc", so it can be a program name with args. |
| +set dummy gcc; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_CC+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$CC"; then |
| + ac_cv_prog_CC="$CC" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_CC="gcc" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +CC=$ac_cv_prog_CC |
| +if test -n "$CC"; then |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +if test -z "$CC"; then |
| + # Extract the first word of "cc", so it can be a program name with args. |
| +set dummy cc; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_CC+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$CC"; then |
| + ac_cv_prog_CC="$CC" # Let the user override the test. |
| +else |
| + ac_prog_rejected=no |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| + ac_prog_rejected=yes |
| + continue |
| + fi |
| + ac_cv_prog_CC="cc" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +if test $ac_prog_rejected = yes; then |
| + # We found a bogon in the path, so make sure we never use it. |
| + set dummy $ac_cv_prog_CC |
| + shift |
| + if test $# != 0; then |
| + # We chose a different compiler from the bogus one. |
| + # However, it has the same basename, so the bogon will be chosen |
| + # first if we set CC to just the basename; use the full file name. |
| + shift |
| + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" |
| + fi |
| +fi |
| +fi |
| +fi |
| +CC=$ac_cv_prog_CC |
| +if test -n "$CC"; then |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 |
| +echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +#AC_PROG_CC_GNU |
| + |
| +if test $ac_cv_c_compiler_gnu = yes; then |
| + GCC=yes |
| + ac_test_CFLAGS="${CFLAGS+set}" |
| + ac_save_CFLAGS="$CFLAGS" |
| + CFLAGS= |
| +# AC_PROG_CC_G |
| + if test "$ac_test_CFLAGS" = set; then |
| + CFLAGS="$ac_save_CFLAGS" |
| + elif test $ac_cv_prog_cc_g = yes; then |
| + CFLAGS="-g -O2" |
| + else |
| + CFLAGS="-O2" |
| + fi |
| +else |
| + GCC= |
| + test "${CFLAGS+set}" = set || CFLAGS="-g" |
| +fi |
| + |
| + |
| +if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. |
| +set dummy ${ac_tool_prefix}as; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_AS+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$AS"; then |
| + ac_cv_prog_AS="$AS" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_AS="${ac_tool_prefix}as" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +AS=$ac_cv_prog_AS |
| +if test -n "$AS"; then |
| + { echo "$as_me:$LINENO: result: $AS" >&5 |
| +echo "${ECHO_T}$AS" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +fi |
| +if test -z "$ac_cv_prog_AS"; then |
| + ac_ct_AS=$AS |
| + # Extract the first word of "as", so it can be a program name with args. |
| +set dummy as; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_ac_ct_AS+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$ac_ct_AS"; then |
| + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_ac_ct_AS="as" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +ac_ct_AS=$ac_cv_prog_ac_ct_AS |
| +if test -n "$ac_ct_AS"; then |
| + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| +echo "${ECHO_T}$ac_ct_AS" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + if test "x$ac_ct_AS" = x; then |
| + AS="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AS=$ac_ct_AS |
| + fi |
| +else |
| + AS="$ac_cv_prog_AS" |
| +fi |
| + |
| +if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. |
| +set dummy ${ac_tool_prefix}ar; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_AR+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$AR"; then |
| + ac_cv_prog_AR="$AR" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_AR="${ac_tool_prefix}ar" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +AR=$ac_cv_prog_AR |
| +if test -n "$AR"; then |
| + { echo "$as_me:$LINENO: result: $AR" >&5 |
| +echo "${ECHO_T}$AR" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +fi |
| +if test -z "$ac_cv_prog_AR"; then |
| + ac_ct_AR=$AR |
| + # Extract the first word of "ar", so it can be a program name with args. |
| +set dummy ar; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$ac_ct_AR"; then |
| + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_ac_ct_AR="ar" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +ac_ct_AR=$ac_cv_prog_ac_ct_AR |
| +if test -n "$ac_ct_AR"; then |
| + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| +echo "${ECHO_T}$ac_ct_AR" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + if test "x$ac_ct_AR" = x; then |
| + AR="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AR=$ac_ct_AR |
| + fi |
| +else |
| + AR="$ac_cv_prog_AR" |
| +fi |
| + |
| +if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. |
| +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_RANLIB+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$RANLIB"; then |
| + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +RANLIB=$ac_cv_prog_RANLIB |
| +if test -n "$RANLIB"; then |
| + { echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| +echo "${ECHO_T}$RANLIB" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +fi |
| +if test -z "$ac_cv_prog_RANLIB"; then |
| + ac_ct_RANLIB=$RANLIB |
| + # Extract the first word of "ranlib", so it can be a program name with args. |
| +set dummy ranlib; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$ac_ct_RANLIB"; then |
| + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_ac_ct_RANLIB="ranlib" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
| +if test -n "$ac_ct_RANLIB"; then |
| + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + if test "x$ac_ct_RANLIB" = x; then |
| + RANLIB=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + RANLIB=$ac_ct_RANLIB |
| + fi |
| +else |
| + RANLIB="$ac_cv_prog_RANLIB" |
| +fi |
| + |
| + |
| +# Find a good install program. We prefer a C program (faster), |
| +# so one script is as good as another. But avoid the broken or |
| +# incompatible versions: |
| +# SysV /etc/install, /usr/sbin/install |
| +# SunOS /usr/etc/install |
| +# IRIX /sbin/install |
| +# AIX /bin/install |
| +# AmigaOS /C/install, which installs bootblocks on floppy discs |
| +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
| +# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
| +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| +# OS/2's system install, which has a completely different semantic |
| +# ./install, which can be erroneously created by make from ./install.sh. |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| +if test -z "$INSTALL"; then |
| +if test "${ac_cv_path_install+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + # Account for people who put trailing slashes in PATH elements. |
| +case $as_dir/ in |
| + ./ | .// | /cC/* | \ |
| + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
| + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ |
| + /usr/ucb/* ) ;; |
| + *) |
| + # OSF1 and SCO ODT 3.0 have their own names for install. |
| + # Don't use installbsd from OSF since it installs stuff as root |
| + # by default. |
| + for ac_prog in ginstall scoinst install; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| + if test $ac_prog = install && |
| + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # AIX install. It has an incompatible calling convention. |
| + : |
| + elif test $ac_prog = install && |
| + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # program-specific install script used by HP pwplus--don't use. |
| + : |
| + else |
| + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
| + break 3 |
| + fi |
| + fi |
| + done |
| + done |
| + ;; |
| +esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + if test "${ac_cv_path_install+set}" = set; then |
| + INSTALL=$ac_cv_path_install |
| + else |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| + # break other packages using the cache if that directory is |
| + # removed, or if the value is a relative name. |
| + INSTALL=$ac_install_sh |
| + fi |
| +fi |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| + |
| +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| +# It thinks the first close brace ends the variable substitution. |
| +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
| + |
| +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
| + |
| +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 |
| +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } |
| + # Check whether --enable-maintainer-mode was given. |
| +if test "${enable_maintainer_mode+set}" = set; then |
| + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval |
| +else |
| + USE_MAINTAINER_MODE=no |
| +fi |
| + |
| + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 |
| +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } |
| + |
| + |
| +if test $USE_MAINTAINER_MODE = yes; then |
| + MAINTAINER_MODE_TRUE= |
| + MAINTAINER_MODE_FALSE='#' |
| +else |
| + MAINTAINER_MODE_TRUE='#' |
| + MAINTAINER_MODE_FALSE= |
| +fi |
| + MAINT=$MAINTAINER_MODE_TRUE |
| + |
| + |
| + |
| +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, |
| +# at least currently, we never actually build a program, so we never |
| +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally |
| +# fails, because we are probably configuring with a cross compiler |
| +# which can't create executables. So we include AC_EXEEXT to keep |
| +# automake happy, but we don't execute it, since we don't care about |
| +# the result. |
| +#if false; then |
| +# |
| +#fi |
| + |
| +. ${newlib_basedir}/configure.host |
| + |
| +newlib_cflags="${newlib_cflags} -fno-builtin" |
| + |
| +NEWLIB_CFLAGS=${newlib_cflags} |
| + |
| + |
| +LDFLAGS=${ldflags} |
| + |
| + |
| + |
| + |
| +if test x${newlib_elix_level} = x0; then |
| + ELIX_LEVEL_0_TRUE= |
| + ELIX_LEVEL_0_FALSE='#' |
| +else |
| + ELIX_LEVEL_0_TRUE='#' |
| + ELIX_LEVEL_0_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x1; then |
| + ELIX_LEVEL_1_TRUE= |
| + ELIX_LEVEL_1_FALSE='#' |
| +else |
| + ELIX_LEVEL_1_TRUE='#' |
| + ELIX_LEVEL_1_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x2; then |
| + ELIX_LEVEL_2_TRUE= |
| + ELIX_LEVEL_2_FALSE='#' |
| +else |
| + ELIX_LEVEL_2_TRUE='#' |
| + ELIX_LEVEL_2_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x3; then |
| + ELIX_LEVEL_3_TRUE= |
| + ELIX_LEVEL_3_FALSE='#' |
| +else |
| + ELIX_LEVEL_3_TRUE='#' |
| + ELIX_LEVEL_3_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x4; then |
| + ELIX_LEVEL_4_TRUE= |
| + ELIX_LEVEL_4_FALSE='#' |
| +else |
| + ELIX_LEVEL_4_TRUE='#' |
| + ELIX_LEVEL_4_FALSE= |
| +fi |
| + |
| + |
| + |
| +if test x${use_libtool} = xyes; then |
| + USE_LIBTOOL_TRUE= |
| + USE_LIBTOOL_FALSE='#' |
| +else |
| + USE_LIBTOOL_TRUE='#' |
| + USE_LIBTOOL_FALSE= |
| +fi |
| + |
| +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we |
| +# use oext, which is set in configure.host based on the target platform. |
| +OBJEXT=${oext} |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| +ac_config_files="$ac_config_files Makefile" |
| + |
| +cat >confcache <<\_ACEOF |
| +# This file is a shell script that caches the results of configure |
| +# tests run on this system so they can be shared between configure |
| +# scripts and configure runs, see configure's option --config-cache. |
| +# It is not useful on other systems. If it contains results you don't |
| +# want to keep, you may remove or edit it. |
| +# |
| +# config.status only pays attention to the cache file if you give it |
| +# the --recheck option to rerun configure. |
| +# |
| +# `ac_cv_env_foo' variables (set or unset) will be overridden when |
| +# loading this file, other *unset* `ac_cv_foo' will be assigned the |
| +# following values. |
| + |
| +_ACEOF |
| + |
| +# The following way of writing the cache mishandles newlines in values, |
| +# but we know of no workaround that is simple, portable, and efficient. |
| +# So, we kill variables containing newlines. |
| +# Ultrix sh set writes to stderr and can't be redirected directly, |
| +# and sets the high bit in the cache file unless we assign to the vars. |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| + |
| + (set) 2>&1 | |
| + case $as_nl`(ac_space=' '; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| + # `set' does not quote correctly, so add quotes (double-quote |
| + # substitution turns \\\\ into \\, and sed turns \\ into \). |
| + sed -n \ |
| + "s/'/'\\\\''/g; |
| + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" |
| + ;; #( |
| + *) |
| + # `set' quotes correctly as required by POSIX, so do not add quotes. |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| + ;; |
| + esac | |
| + sort |
| +) | |
| + sed ' |
| + /^ac_cv_env_/b end |
| + t clear |
| + :clear |
| + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ |
| + t end |
| + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
| + :end' >>confcache |
| +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else |
| + if test -w "$cache_file"; then |
| + test "x$cache_file" != "x/dev/null" && |
| + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 |
| +echo "$as_me: updating cache $cache_file" >&6;} |
| + cat confcache >$cache_file |
| + else |
| + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 |
| +echo "$as_me: not updating unwritable cache $cache_file" >&6;} |
| + fi |
| +fi |
| +rm -f confcache |
| + |
| +test "x$prefix" = xNONE && prefix=$ac_default_prefix |
| +# Let make expand exec_prefix. |
| +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
| + |
| +# Transform confdefs.h into DEFS. |
| +# Protect against shell expansion while executing Makefile rules. |
| +# Protect against Makefile macro expansion. |
| +# |
| +# If the first sed substitution is executed (which looks for macros that |
| +# take arguments), then branch to the quote section. Otherwise, |
| +# look for a macro that doesn't take arguments. |
| +ac_script=' |
| +t clear |
| +:clear |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g |
| +t quote |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g |
| +t quote |
| +b any |
| +:quote |
| +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g |
| +s/\[/\\&/g |
| +s/\]/\\&/g |
| +s/\$/$$/g |
| +H |
| +:any |
| +${ |
| + g |
| + s/^\n// |
| + s/\n/ /g |
| + p |
| +} |
| +' |
| +DEFS=`sed -n "$ac_script" confdefs.h` |
| + |
| + |
| +ac_libobjs= |
| +ac_ltlibobjs= |
| +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue |
| + # 1. Remove the extension, and $U if already installed. |
| + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' |
| + ac_i=`echo "$ac_i" | sed "$ac_script"` |
| + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR |
| + # will be set to the directory where LIBOBJS objects are built. |
| + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" |
| + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' |
| +done |
| +LIBOBJS=$ac_libobjs |
| + |
| +LTLIBOBJS=$ac_ltlibobjs |
| + |
| + |
| + |
| +: ${CONFIG_STATUS=./config.status} |
| +ac_clean_files_save=$ac_clean_files |
| +ac_clean_files="$ac_clean_files $CONFIG_STATUS" |
| +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 |
| +echo "$as_me: creating $CONFIG_STATUS" >&6;} |
| +cat >$CONFIG_STATUS <<_ACEOF |
| +#! $SHELL |
| +# Generated by $as_me. |
| +# Run this file to recreate the current configuration. |
| +# Compiler output produced by configure, useful for debugging |
| +# configure, is in config.log if it exists. |
| + |
| +debug=false |
| +ac_cs_recheck=false |
| +ac_cs_silent=false |
| +SHELL=\${CONFIG_SHELL-$SHELL} |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +## --------------------- ## |
| +## M4sh Initialization. ## |
| +## --------------------- ## |
| + |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| +fi |
| + |
| +# Support unset when possible. |
| +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| + as_unset=unset |
| +else |
| + as_unset=false |
| +fi |
| + |
| + |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| +# Work around bugs in pre-3.0 UWIN ksh. |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| +PS1='$ ' |
| +PS2='> ' |
| +PS4='+ ' |
| + |
| +# NLS nuisances. |
| +for as_var in \ |
| + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
| + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
| + LC_TELEPHONE LC_TIME |
| +do |
| + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| + eval $as_var=C; export $as_var |
| + else |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + fi |
| +done |
| + |
| +# Required to use basename. |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| + as_basename=basename |
| +else |
| + as_basename=false |
| +fi |
| + |
| + |
| +# Name of the executable. |
| +as_me=`$as_basename -- "$0" || |
| +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| + X"$0" : 'X\(//\)$' \| \ |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X/"$0" | |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + |
| +# CDPATH. |
| +$as_unset CDPATH |
| + |
| + |
| + |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| + |
| + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| + # uniformly replaced by the line number. The first 'sed' inserts a |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| + sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| + N |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| + t loop |
| + s/-\n.*// |
| + ' >$as_me.lineno && |
| + chmod +x "$as_me.lineno" || |
| + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + # Don't try to exec as it changes $[0], causing all sort of problems |
| + # (the dirname of $[0] is not the place where we might find the |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| + # Exit status is that of the last command. |
| + exit |
| +} |
| + |
| + |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| +esac |
| + |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| +echo >conf$$.file |
| +if ln -s conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| + as_ln_s='cp -p' |
| +elif ln conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s=ln |
| +else |
| + as_ln_s='cp -p' |
| +fi |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| + |
| +if mkdir -p . 2>/dev/null; then |
| + as_mkdir_p=: |
| +else |
| + test -d ./-p && rmdir ./-p |
| + as_mkdir_p=false |
| +fi |
| + |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| + |
| +# Sed expression to map a string onto a valid CPP name. |
| +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| +# Sed expression to map a string onto a valid variable name. |
| +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| + |
| +exec 6>&1 |
| + |
| +# Save the log message, to keep $[0] and so on meaningful, and to |
| +# report actual input values of CONFIG_FILES etc. instead of their |
| +# values after options handling. |
| +ac_log=" |
| +This file was extended by newlib $as_me NEWLIB_VERSION, which was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| + |
| + CONFIG_FILES = $CONFIG_FILES |
| + CONFIG_HEADERS = $CONFIG_HEADERS |
| + CONFIG_LINKS = $CONFIG_LINKS |
| + CONFIG_COMMANDS = $CONFIG_COMMANDS |
| + $ $0 $@ |
| + |
| +on `(hostname || uname -n) 2>/dev/null | sed 1q` |
| +" |
| + |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +# Files that config.status was made for. |
| +config_files="$ac_config_files" |
| + |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +ac_cs_usage="\ |
| +\`$as_me' instantiates files from templates according to the |
| +current configuration. |
| + |
| +Usage: $0 [OPTIONS] [FILE]... |
| + |
| + -h, --help print this help, then exit |
| + -V, --version print version number and configuration settings, then exit |
| + -q, --quiet do not print progress messages |
| + -d, --debug don't remove temporary files |
| + --recheck update $as_me by reconfiguring in the same conditions |
| + --file=FILE[:TEMPLATE] |
| + instantiate the configuration file FILE |
| + |
| +Configuration files: |
| +$config_files |
| + |
| +Report bugs to <bug-autoconf@gnu.org>." |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +ac_cs_version="\\ |
| +newlib config.status NEWLIB_VERSION |
| +configured by $0, generated by GNU Autoconf 2.61, |
| + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" |
| + |
| +Copyright (C) 2006 Free Software Foundation, Inc. |
| +This config.status script is free software; the Free Software Foundation |
| +gives unlimited permission to copy, distribute and modify it." |
| + |
| +ac_pwd='$ac_pwd' |
| +srcdir='$srcdir' |
| +INSTALL='$INSTALL' |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +# If no file are specified by the user, then we need to provide default |
| +# value. By we need to know if files were specified by the user. |
| +ac_need_defaults=: |
| +while test $# != 0 |
| +do |
| + case $1 in |
| + --*=*) |
| + ac_option=`expr "X$1" : 'X\([^=]*\)='` |
| + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` |
| + ac_shift=: |
| + ;; |
| + *) |
| + ac_option=$1 |
| + ac_optarg=$2 |
| + ac_shift=shift |
| + ;; |
| + esac |
| + |
| + case $ac_option in |
| + # Handling of the options. |
| + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
| + ac_cs_recheck=: ;; |
| + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) |
| + echo "$ac_cs_version"; exit ;; |
| + --debug | --debu | --deb | --de | --d | -d ) |
| + debug=: ;; |
| + --file | --fil | --fi | --f ) |
| + $ac_shift |
| + CONFIG_FILES="$CONFIG_FILES $ac_optarg" |
| + ac_need_defaults=false;; |
| + --he | --h | --help | --hel | -h ) |
| + echo "$ac_cs_usage"; exit ;; |
| + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| + | -silent | --silent | --silen | --sile | --sil | --si | --s) |
| + ac_cs_silent=: ;; |
| + |
| + # This is an error. |
| + -*) { echo "$as_me: error: unrecognized option: $1 |
| +Try \`$0 --help' for more information." >&2 |
| + { (exit 1); exit 1; }; } ;; |
| + |
| + *) ac_config_targets="$ac_config_targets $1" |
| + ac_need_defaults=false ;; |
| + |
| + esac |
| + shift |
| +done |
| + |
| +ac_configure_extra_args= |
| + |
| +if $ac_cs_silent; then |
| + exec 6>/dev/null |
| + ac_configure_extra_args="$ac_configure_extra_args --silent" |
| +fi |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +if \$ac_cs_recheck; then |
| + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
| + CONFIG_SHELL=$SHELL |
| + export CONFIG_SHELL |
| + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
| +fi |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +exec 5>>config.log |
| +{ |
| + echo |
| + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
| +## Running $as_me. ## |
| +_ASBOX |
| + echo "$ac_log" |
| +} >&5 |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| + |
| +# Handling of arguments. |
| +for ac_config_target in $ac_config_targets |
| +do |
| + case $ac_config_target in |
| + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
| + |
| + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
| +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
| + { (exit 1); exit 1; }; };; |
| + esac |
| +done |
| + |
| + |
| +# If the user did not use the arguments to specify the items to instantiate, |
| +# then the envvar interface is used. Set only those that are not. |
| +# We use the long form for the default assignment because of an extremely |
| +# bizarre bug on SunOS 4.1.3. |
| +if $ac_need_defaults; then |
| + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files |
| +fi |
| + |
| +# Have a temporary directory for convenience. Make it in the build tree |
| +# simply because there is no reason against having it here, and in addition, |
| +# creating and moving files from /tmp can sometimes cause problems. |
| +# Hook for its removal unless debugging. |
| +# Note that there is a small window in which the directory will not be cleaned: |
| +# after its creation but before its name has been assigned to `$tmp'. |
| +$debug || |
| +{ |
| + tmp= |
| + trap 'exit_status=$? |
| + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status |
| +' 0 |
| + trap '{ (exit 1); exit 1; }' 1 2 13 15 |
| +} |
| +# Create a (secure) tmp directory for tmp files. |
| + |
| +{ |
| + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && |
| + test -n "$tmp" && test -d "$tmp" |
| +} || |
| +{ |
| + tmp=./conf$$-$RANDOM |
| + (umask 077 && mkdir "$tmp") |
| +} || |
| +{ |
| + echo "$me: cannot create a temporary directory in ." >&2 |
| + { (exit 1); exit 1; } |
| +} |
| + |
| +# |
| +# Set up the sed scripts for CONFIG_FILES section. |
| +# |
| + |
| +# No need to generate the scripts if there are no CONFIG_FILES. |
| +# This happens for instance when ./config.status config.h |
| +if test -n "$CONFIG_FILES"; then |
| + |
| +_ACEOF |
| + |
| + |
| + |
| +ac_delim='%!_!# ' |
| +for ac_last_try in false false false false false :; do |
| + cat >conf$$subs.sed <<_ACEOF |
| +SHELL!$SHELL$ac_delim |
| +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim |
| +PACKAGE_NAME!$PACKAGE_NAME$ac_delim |
| +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim |
| +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim |
| +PACKAGE_STRING!$PACKAGE_STRING$ac_delim |
| +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim |
| +exec_prefix!$exec_prefix$ac_delim |
| +prefix!$prefix$ac_delim |
| +program_transform_name!$program_transform_name$ac_delim |
| +bindir!$bindir$ac_delim |
| +sbindir!$sbindir$ac_delim |
| +libexecdir!$libexecdir$ac_delim |
| +datarootdir!$datarootdir$ac_delim |
| +datadir!$datadir$ac_delim |
| +sysconfdir!$sysconfdir$ac_delim |
| +sharedstatedir!$sharedstatedir$ac_delim |
| +localstatedir!$localstatedir$ac_delim |
| +includedir!$includedir$ac_delim |
| +oldincludedir!$oldincludedir$ac_delim |
| +docdir!$docdir$ac_delim |
| +infodir!$infodir$ac_delim |
| +htmldir!$htmldir$ac_delim |
| +dvidir!$dvidir$ac_delim |
| +pdfdir!$pdfdir$ac_delim |
| +psdir!$psdir$ac_delim |
| +libdir!$libdir$ac_delim |
| +localedir!$localedir$ac_delim |
| +mandir!$mandir$ac_delim |
| +DEFS!$DEFS$ac_delim |
| +ECHO_C!$ECHO_C$ac_delim |
| +ECHO_N!$ECHO_N$ac_delim |
| +ECHO_T!$ECHO_T$ac_delim |
| +LIBS!$LIBS$ac_delim |
| +build_alias!$build_alias$ac_delim |
| +host_alias!$host_alias$ac_delim |
| +target_alias!$target_alias$ac_delim |
| +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim |
| +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim |
| +newlib_basedir!$newlib_basedir$ac_delim |
| +build!$build$ac_delim |
| +build_cpu!$build_cpu$ac_delim |
| +build_vendor!$build_vendor$ac_delim |
| +build_os!$build_os$ac_delim |
| +host!$host$ac_delim |
| +host_cpu!$host_cpu$ac_delim |
| +host_vendor!$host_vendor$ac_delim |
| +host_os!$host_os$ac_delim |
| +target!$target$ac_delim |
| +target_cpu!$target_cpu$ac_delim |
| +target_vendor!$target_vendor$ac_delim |
| +target_os!$target_os$ac_delim |
| +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim |
| +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim |
| +INSTALL_DATA!$INSTALL_DATA$ac_delim |
| +PACKAGE!$PACKAGE$ac_delim |
| +VERSION!$VERSION$ac_delim |
| +ACLOCAL!$ACLOCAL$ac_delim |
| +AUTOCONF!$AUTOCONF$ac_delim |
| +AUTOMAKE!$AUTOMAKE$ac_delim |
| +AUTOHEADER!$AUTOHEADER$ac_delim |
| +MAKEINFO!$MAKEINFO$ac_delim |
| +SET_MAKE!$SET_MAKE$ac_delim |
| +CC!$CC$ac_delim |
| +AS!$AS$ac_delim |
| +AR!$AR$ac_delim |
| +RANLIB!$RANLIB$ac_delim |
| +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim |
| +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim |
| +MAINT!$MAINT$ac_delim |
| +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim |
| +LDFLAGS!$LDFLAGS$ac_delim |
| +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim |
| +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim |
| +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim |
| +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim |
| +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim |
| +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim |
| +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim |
| +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim |
| +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim |
| +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim |
| +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim |
| +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim |
| +OBJEXT!$OBJEXT$ac_delim |
| +oext!$oext$ac_delim |
| +aext!$aext$ac_delim |
| +libm_machine_dir!$libm_machine_dir$ac_delim |
| +machine_dir!$machine_dir$ac_delim |
| +sys_dir!$sys_dir$ac_delim |
| +LIBOBJS!$LIBOBJS$ac_delim |
| +LTLIBOBJS!$LTLIBOBJS$ac_delim |
| +_ACEOF |
| + |
| + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then |
| + break |
| + elif $ac_last_try; then |
| + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 |
| +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} |
| + { (exit 1); exit 1; }; } |
| + else |
| + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " |
| + fi |
| +done |
| + |
| +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` |
| +if test -n "$ac_eof"; then |
| + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` |
| + ac_eof=`expr $ac_eof + 1` |
| +fi |
| + |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end |
| +_ACEOF |
| +sed ' |
| +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g |
| +s/^/s,@/; s/!/@,|#_!!_#|/ |
| +:n |
| +t n |
| +s/'"$ac_delim"'$/,g/; t |
| +s/$/\\/; p |
| +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n |
| +' >>$CONFIG_STATUS <conf$$subs.sed |
| +rm -f conf$$subs.sed |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +:end |
| +s/|#_!!_#|//g |
| +CEOF$ac_eof |
| +_ACEOF |
| + |
| + |
| +# VPATH may cause trouble with some makes, so we remove $(srcdir), |
| +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
| +# trailing colons and then remove the whole line if VPATH becomes empty |
| +# (actually we leave an empty line to preserve line numbers). |
| +if test "x$srcdir" = x.; then |
| + ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
| +s/:*\$(srcdir):*/:/ |
| +s/:*\${srcdir}:*/:/ |
| +s/:*@srcdir@:*/:/ |
| +s/^\([^=]*=[ ]*\):*/\1/ |
| +s/:*$// |
| +s/^[^=]*=[ ]*$// |
| +}' |
| +fi |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +fi # test -n "$CONFIG_FILES" |
| + |
| + |
| +for ac_tag in :F $CONFIG_FILES |
| +do |
| + case $ac_tag in |
| + :[FHLC]) ac_mode=$ac_tag; continue;; |
| + esac |
| + case $ac_mode$ac_tag in |
| + :[FHL]*:*);; |
| + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 |
| +echo "$as_me: error: Invalid tag $ac_tag." >&2;} |
| + { (exit 1); exit 1; }; };; |
| + :[FH]-) ac_tag=-:-;; |
| + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; |
| + esac |
| + ac_save_IFS=$IFS |
| + IFS=: |
| + set x $ac_tag |
| + IFS=$ac_save_IFS |
| + shift |
| + ac_file=$1 |
| + shift |
| + |
| + case $ac_mode in |
| + :L) ac_source=$1;; |
| + :[FH]) |
| + ac_file_inputs= |
| + for ac_f |
| + do |
| + case $ac_f in |
| + -) ac_f="$tmp/stdin";; |
| + *) # Look for the file first in the build tree, then in the source tree |
| + # (if the path is not absolute). The absolute path cannot be DOS-style, |
| + # because $ac_f cannot contain `:'. |
| + test -f "$ac_f" || |
| + case $ac_f in |
| + [\\/$]*) false;; |
| + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; |
| + esac || |
| + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 |
| +echo "$as_me: error: cannot find input file: $ac_f" >&2;} |
| + { (exit 1); exit 1; }; };; |
| + esac |
| + ac_file_inputs="$ac_file_inputs $ac_f" |
| + done |
| + |
| + # Let's still pretend it is `configure' which instantiates (i.e., don't |
| + # use $as_me), people would be surprised to read: |
| + # /* config.h. Generated by config.status. */ |
| + configure_input="Generated from "`IFS=: |
| + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." |
| + if test x"$ac_file" != x-; then |
| + configure_input="$ac_file. $configure_input" |
| + { echo "$as_me:$LINENO: creating $ac_file" >&5 |
| +echo "$as_me: creating $ac_file" >&6;} |
| + fi |
| + |
| + case $ac_tag in |
| + *:-:* | *:-) cat >"$tmp/stdin";; |
| + esac |
| + ;; |
| + esac |
| + |
| + ac_dir=`$as_dirname -- "$ac_file" || |
| +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| + X"$ac_file" : 'X\(//\)[^/]' \| \ |
| + X"$ac_file" : 'X\(//\)$' \| \ |
| + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X"$ac_file" | |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + { as_dir="$ac_dir" |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| + as_dirs= |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| + X"$as_dir" : 'X\(//\)[^/]' \| \ |
| + X"$as_dir" : 'X\(//\)$' \| \ |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X"$as_dir" | |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| + done |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| + { (exit 1); exit 1; }; }; } |
| + ac_builddir=. |
| + |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| + |
| +case $srcdir in |
| + .) # We are building in place. |
| + ac_srcdir=. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| + ac_srcdir=$srcdir$ac_dir_suffix; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| +esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| + |
| + |
| + case $ac_mode in |
| + :F) |
| + # |
| + # CONFIG_FILE |
| + # |
| + |
| + case $INSTALL in |
| + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; |
| + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; |
| + esac |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +# If the template does not know about datarootdir, expand it. |
| +# FIXME: This hack should be removed a few years after 2.60. |
| +ac_datarootdir_hack=; ac_datarootdir_seen= |
| + |
| +case `sed -n '/datarootdir/ { |
| + p |
| + q |
| +} |
| +/@datadir@/p |
| +/@docdir@/p |
| +/@infodir@/p |
| +/@localedir@/p |
| +/@mandir@/p |
| +' $ac_file_inputs` in |
| +*datarootdir*) ac_datarootdir_seen=yes;; |
| +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) |
| + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 |
| +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| + ac_datarootdir_hack=' |
| + s&@datadir@&$datadir&g |
| + s&@docdir@&$docdir&g |
| + s&@infodir@&$infodir&g |
| + s&@localedir@&$localedir&g |
| + s&@mandir@&$mandir&g |
| + s&\\\${datarootdir}&$datarootdir&g' ;; |
| +esac |
| +_ACEOF |
| + |
| +# Neutralize VPATH when `$srcdir' = `.'. |
| +# Shell code in configure.ac might set extrasub. |
| +# FIXME: do we really want to maintain this feature? |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| + sed "$ac_vpsub |
| +$extrasub |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +:t |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
| +s&@configure_input@&$configure_input&;t t |
| +s&@top_builddir@&$ac_top_builddir_sub&;t t |
| +s&@srcdir@&$ac_srcdir&;t t |
| +s&@abs_srcdir@&$ac_abs_srcdir&;t t |
| +s&@top_srcdir@&$ac_top_srcdir&;t t |
| +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t |
| +s&@builddir@&$ac_builddir&;t t |
| +s&@abs_builddir@&$ac_abs_builddir&;t t |
| +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t |
| +s&@INSTALL@&$ac_INSTALL&;t t |
| +$ac_datarootdir_hack |
| +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out |
| + |
| +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && |
| + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && |
| + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && |
| + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&5 |
| +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&2;} |
| + |
| + rm -f "$tmp/stdin" |
| + case $ac_file in |
| + -) cat "$tmp/out"; rm -f "$tmp/out";; |
| + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; |
| + esac |
| + ;; |
| + |
| + |
| + |
| + esac |
| + |
| +done # for ac_tag |
| + |
| + |
| +{ (exit 0); exit 0; } |
| +_ACEOF |
| +chmod +x $CONFIG_STATUS |
| +ac_clean_files=$ac_clean_files_save |
| + |
| + |
| +# configure is writing to config.log, and then calls config.status. |
| +# config.status does its own redirection, appending to config.log. |
| +# Unfortunately, on DOS this fails, as config.log is still kept open |
| +# by configure, so config.status won't be able to write to it; its |
| +# output is simply discarded. So we exec the FD to /dev/null, |
| +# effectively closing config.log, so it can be properly (re)opened and |
| +# appended to by config.status. When coming back to configure, we |
| +# need to make the FD available again. |
| +if test "$no_create" != yes; then |
| + ac_cs_success=: |
| + ac_config_status_args= |
| + test "$silent" = yes && |
| + ac_config_status_args="$ac_config_status_args --quiet" |
| + exec 5>/dev/null |
| + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false |
| + exec 5>>config.log |
| + # Use ||, not &&, to avoid exiting from the if with $? = 1, which |
| + # would make configure fail if this is the last instruction. |
| + $ac_cs_success || { (exit 1); exit 1; } |
| +fi |
| + |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure.in newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in |
| --- newlib-1.17.0/newlib/libc/machine/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,14 @@ |
| +dnl This is the newlib/libc/machine/arm configure.in file. |
| +dnl Process this file with autoconf to produce a configure script. |
| + |
| +AC_PREREQ(2.59) |
| +AC_INIT([newlib],[NEWLIB_VERSION]) |
| +AC_CONFIG_SRCDIR([Makefile.am]) |
| + |
| +dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. |
| +AC_CONFIG_AUX_DIR(../../../..) |
| + |
| +NEWLIB_CONFIGURE(../../..) |
| + |
| +AC_CONFIG_FILES([Makefile]) |
| +AC_OUTPUT |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am |
| --- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,16 @@ |
| +## Process this file with automake to generate Makefile.in |
| + |
| +AUTOMAKE_OPTIONS = cygnus |
| + |
| +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) |
| + |
| +AM_CCASFLAGS = $(INCLUDES) |
| + |
| +noinst_LIBRARIES = lib.a |
| + |
| +lib_a_SOURCES = strcmp.S strncpy.S memcpy.S |
| +lib_a_CCASFLAGS=$(AM_CCASFLAGS) |
| +lib_a_CFLAGS = $(AM_CFLAGS) |
| + |
| +ACLOCAL_AMFLAGS = -I ../../.. |
| +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in |
| --- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,327 @@ |
| +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am |
| + |
| +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. |
| +# This Makefile.in is free software; the Free Software Foundation |
| +# gives unlimited permission to copy and/or distribute it, |
| +# with or without modifications, as long as this notice is preserved. |
| + |
| +# This program is distributed in the hope that it will be useful, |
| +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| +# PARTICULAR PURPOSE. |
| + |
| + |
| +SHELL = @SHELL@ |
| + |
| +srcdir = @srcdir@ |
| +top_srcdir = @top_srcdir@ |
| +VPATH = @srcdir@ |
| +prefix = @prefix@ |
| +exec_prefix = @exec_prefix@ |
| + |
| +bindir = @bindir@ |
| +sbindir = @sbindir@ |
| +libexecdir = @libexecdir@ |
| +datadir = @datadir@ |
| +sysconfdir = @sysconfdir@ |
| +sharedstatedir = @sharedstatedir@ |
| +localstatedir = @localstatedir@ |
| +libdir = @libdir@ |
| +infodir = @infodir@ |
| +mandir = @mandir@ |
| +includedir = @includedir@ |
| +oldincludedir = /usr/include |
| + |
| +DESTDIR = |
| + |
| +pkgdatadir = $(datadir)/@PACKAGE@ |
| +pkglibdir = $(libdir)/@PACKAGE@ |
| +pkgincludedir = $(includedir)/@PACKAGE@ |
| + |
| +top_builddir = . |
| + |
| +ACLOCAL = @ACLOCAL@ |
| +AUTOCONF = @AUTOCONF@ |
| +AUTOMAKE = @AUTOMAKE@ |
| +AUTOHEADER = @AUTOHEADER@ |
| + |
| +INSTALL = @INSTALL@ |
| +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) |
| +INSTALL_DATA = @INSTALL_DATA@ |
| +INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| +transform = @program_transform_name@ |
| + |
| +NORMAL_INSTALL = : |
| +PRE_INSTALL = : |
| +POST_INSTALL = : |
| +NORMAL_UNINSTALL = : |
| +PRE_UNINSTALL = : |
| +POST_UNINSTALL = : |
| +build_alias = @build_alias@ |
| +build_triplet = @build@ |
| +host_alias = @host_alias@ |
| +host_triplet = @host@ |
| +target_alias = @target_alias@ |
| +target_triplet = @target@ |
| +AR = @AR@ |
| +AS = @AS@ |
| +CC = @CC@ |
| +CPP = @CPP@ |
| +EXEEXT = @EXEEXT@ |
| +LDFLAGS = @LDFLAGS@ |
| +MAINT = @MAINT@ |
| +MAKEINFO = @MAKEINFO@ |
| +NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ |
| +OBJEXT = @OBJEXT@ |
| +PACKAGE = @PACKAGE@ |
| +RANLIB = @RANLIB@ |
| +VERSION = @VERSION@ |
| +aext = @aext@ |
| +libm_machine_dir = @libm_machine_dir@ |
| +machine_dir = @machine_dir@ |
| +newlib_basedir = @newlib_basedir@ |
| +oext = @oext@ |
| +sys_dir = @sys_dir@ |
| + |
| +AUTOMAKE_OPTIONS = cygnus |
| + |
| +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) |
| + |
| +noinst_LIBRARIES = lib.a |
| + |
| +lib_a_SOURCES = strcmp.S strncpy.S memcpy.S |
| + |
| +ACLOCAL_AMFLAGS = -I ../../.. |
| +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host |
| +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs |
| +CONFIG_CLEAN_FILES = |
| +LIBRARIES = $(noinst_LIBRARIES) |
| + |
| + |
| +DEFS = @DEFS@ -I. -I$(srcdir) |
| +CPPFLAGS = |
| +LIBS = @LIBS@ |
| +lib_a_LIBADD = |
| +lib_a_OBJECTS = strcmp.o strncpy.o memcpy.o |
| +CFLAGS = @CFLAGS@ |
| +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| +CCLD = $(CC) |
| +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ |
| +DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in |
| + |
| + |
| +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) |
| + |
| +TAR = gtar |
| +GZIP_ENV = --best |
| +SOURCES = $(lib_a_SOURCES) |
| +OBJECTS = $(lib_a_OBJECTS) |
| + |
| +all: all-redirect |
| +.SUFFIXES: |
| +.SUFFIXES: .S .c .o .s |
| +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) |
| + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile |
| + |
| +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| + cd $(top_builddir) \ |
| + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status |
| + |
| +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ |
| + ../../../acinclude.m4 ../../../aclocal.m4 \ |
| + ../../../libtool.m4 |
| + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| + |
| +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| + $(SHELL) ./config.status --recheck |
| +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) |
| + cd $(srcdir) && $(AUTOCONF) |
| + |
| +mostlyclean-noinstLIBRARIES: |
| + |
| +clean-noinstLIBRARIES: |
| + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) |
| + |
| +distclean-noinstLIBRARIES: |
| + |
| +maintainer-clean-noinstLIBRARIES: |
| + |
| +.c.o: |
| + $(COMPILE) -c $< |
| + |
| +.s.o: |
| + $(COMPILE) -c $< |
| + |
| +.S.o: |
| + $(COMPILE) -c $< |
| + |
| +mostlyclean-compile: |
| + -rm -f *.o core *.core |
| + |
| +clean-compile: |
| + |
| +distclean-compile: |
| + -rm -f *.tab.c |
| + |
| +maintainer-clean-compile: |
| + |
| +lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) |
| + -rm -f lib.a |
| + $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) |
| + $(RANLIB) lib.a |
| + |
| +tags: TAGS |
| + |
| +ID: $(HEADERS) $(SOURCES) $(LISP) |
| + list='$(SOURCES) $(HEADERS)'; \ |
| + unique=`for i in $$list; do echo $$i; done | \ |
| + awk ' { files[$$0] = 1; } \ |
| + END { for (i in files) print i; }'`; \ |
| + here=`pwd` && cd $(srcdir) \ |
| + && mkid -f$$here/ID $$unique $(LISP) |
| + |
| +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) |
| + tags=; \ |
| + here=`pwd`; \ |
| + list='$(SOURCES) $(HEADERS)'; \ |
| + unique=`for i in $$list; do echo $$i; done | \ |
| + awk ' { files[$$0] = 1; } \ |
| + END { for (i in files) print i; }'`; \ |
| + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ |
| + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) |
| + |
| +mostlyclean-tags: |
| + |
| +clean-tags: |
| + |
| +distclean-tags: |
| + -rm -f TAGS ID |
| + |
| +maintainer-clean-tags: |
| + |
| +distdir = $(PACKAGE)-$(VERSION) |
| +top_distdir = $(distdir) |
| + |
| +# This target untars the dist file and tries a VPATH configuration. Then |
| +# it guarantees that the distribution is self-contained by making another |
| +# tarfile. |
| +distcheck: dist |
| + -rm -rf $(distdir) |
| + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz |
| + mkdir $(distdir)/=build |
| + mkdir $(distdir)/=inst |
| + dc_install_base=`cd $(distdir)/=inst && pwd`; \ |
| + cd $(distdir)/=build \ |
| + && ../configure --srcdir=.. --prefix=$$dc_install_base \ |
| + && $(MAKE) $(AM_MAKEFLAGS) \ |
| + && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| + && $(MAKE) $(AM_MAKEFLAGS) check \ |
| + && $(MAKE) $(AM_MAKEFLAGS) install \ |
| + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| + && $(MAKE) $(AM_MAKEFLAGS) dist |
| + -rm -rf $(distdir) |
| + @banner="$(distdir).tar.gz is ready for distribution"; \ |
| + dashes=`echo "$$banner" | sed s/./=/g`; \ |
| + echo "$$dashes"; \ |
| + echo "$$banner"; \ |
| + echo "$$dashes" |
| +dist: distdir |
| + -chmod -R a+r $(distdir) |
| + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
| + -rm -rf $(distdir) |
| +dist-all: distdir |
| + -chmod -R a+r $(distdir) |
| + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
| + -rm -rf $(distdir) |
| +distdir: $(DISTFILES) |
| + -rm -rf $(distdir) |
| + mkdir $(distdir) |
| + -chmod 777 $(distdir) |
| + @for file in $(DISTFILES); do \ |
| + if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| + if test -d $$d/$$file; then \ |
| + cp -pr $$d/$$file $(distdir)/$$file; \ |
| + else \ |
| + test -f $(distdir)/$$file \ |
| + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ |
| + || cp -p $$d/$$file $(distdir)/$$file || :; \ |
| + fi; \ |
| + done |
| +info-am: |
| +info: info-am |
| +dvi-am: |
| +dvi: dvi-am |
| +check-am: |
| +check: check-am |
| +installcheck-am: |
| +installcheck: installcheck-am |
| +install-info-am: |
| +install-info: install-info-am |
| +install-exec-am: |
| +install-exec: install-exec-am |
| + |
| +install-data-am: |
| +install-data: install-data-am |
| + |
| +install-am: all-am |
| + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| +install: install-am |
| +uninstall-am: |
| +uninstall: uninstall-am |
| +all-am: Makefile $(LIBRARIES) |
| +all-redirect: all-am |
| +install-strip: |
| + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install |
| +installdirs: |
| + |
| + |
| +mostlyclean-generic: |
| + |
| +clean-generic: |
| + |
| +distclean-generic: |
| + -rm -f Makefile $(CONFIG_CLEAN_FILES) |
| + -rm -f config.cache config.log stamp-h stamp-h[0-9]* |
| + |
| +maintainer-clean-generic: |
| +mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ |
| + mostlyclean-tags mostlyclean-generic |
| + |
| +mostlyclean: mostlyclean-am |
| + |
| +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ |
| + mostlyclean-am |
| + |
| +clean: clean-am |
| + |
| +distclean-am: distclean-noinstLIBRARIES distclean-compile \ |
| + distclean-tags distclean-generic clean-am |
| + |
| +distclean: distclean-am |
| + -rm -f config.status |
| + |
| +maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ |
| + maintainer-clean-compile maintainer-clean-tags \ |
| + maintainer-clean-generic distclean-am |
| + @echo "This command is intended for maintainers to use;" |
| + @echo "it deletes files that may require special tools to rebuild." |
| + |
| +maintainer-clean: maintainer-clean-am |
| + -rm -f config.status |
| + |
| +.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ |
| +clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ |
| +mostlyclean-compile distclean-compile clean-compile \ |
| +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ |
| +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ |
| +check-am installcheck-am installcheck install-info-am install-info \ |
| +install-exec-am install-exec install-data-am install-data install-am \ |
| +install uninstall-am uninstall all-redirect all-am all installdirs \ |
| +mostlyclean-generic distclean-generic clean-generic \ |
| +maintainer-clean-generic clean mostlyclean distclean maintainer-clean |
| + |
| + |
| +# Tell versions [3.59,3.63) of GNU make to not export all variables. |
| +# Otherwise a system limit (for SysV at least) may be exceeded. |
| +.NOEXPORT: |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S |
| --- newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,269 @@ |
| +/* |
| + * Copyright (C) 2004 Atmel Norway |
| + */ |
| + |
| +/* Don't use r12 as dst since we must return it unmodified */ |
| + |
| + .text |
| + .global memcpy |
| + .type memcpy, @function |
| +#if defined(__AVR32_HAS_UNALIGNED_WORD__) |
| +memcpy: |
| + /* Check if src and dst are aligned |
| + if not do a word based copying. */ |
| + or r9, r12, r11 |
| + andl r9, 3, COH |
| + brne .Lunaligned_copy |
| + |
| + pushm r12, lr |
| + sub r10, 8 |
| + brmi .Lword_copy |
| + |
| +0: |
| + ld.d r8, r11++ |
| + sub r10, 8 |
| + st.d r12++, r8 |
| + brpl 0b |
| + |
| +.Lword_copy: |
| + sub r10, -4 |
| + brmi .Lbyte_copy |
| + |
| +0: |
| + ld.w r8, r11++ |
| + sub r10, 4 |
| + st.w r12++, r8 |
| + brpl 0b |
| + |
| +.Lbyte_copy: |
| + sub r10, -4 |
| + breq 2f |
| +1: |
| + ld.ub r8, r11++ |
| + sub r10, 1 |
| + st.b r12++, r8 |
| + brne 1b |
| +2: |
| + popm r12, pc |
| + |
| +.Lunaligned_copy: |
| + mov r9, r12 |
| + sub r10, 4 |
| + |
| + brmi .Lbyte_copy2 |
| + |
| +0: |
| + ld.w r8, r11++ |
| + sub r10, 4 |
| + st.w r12++, r8 |
| + brpl 0b |
| + |
| +.Lbyte_copy2: |
| + sub r10, -4 |
| + reteq r9 |
| +1: |
| + ld.ub r8, r11++ |
| + sub r10, 1 |
| + st.b r12++, r8 |
| + brne 1b |
| + |
| + ret r9 |
| + |
| + |
| +#else |
| + |
| +#define dst r9 |
| +#define src r11 |
| +#define len r10 |
| + |
| +#if defined(__AVR32_UC__) |
| +memcpy: |
| + /* If we have less than 8 bytes, don't do anything fancy |
| + just an unrolled byte copy */ |
| + cp.w r10, 8 |
| + brlt .Lless_than_8 |
| + /* Check if src and dst are aligned. */ |
| + or r9, r12, r11 |
| + andl r9, 3, COH |
| + brne .Lunaligned_copy |
| + |
| + /* Check if larger than 31 */ |
| + cp.w r10, 32 |
| + brge .Lmore_than_31: |
| + |
| + /* Less than 32. */ |
| + asr r8, r10, 2 |
| + rsub r9, r8, 8 |
| + add pc, pc, r9 << 2 |
| + .irp offset,0,1,2,3,4,5,6 |
| + ld.w r9, r11[(6-\offset)*4] |
| + st.w r12[(6-\offset)*4], r9 |
| + .endr |
| + |
| + add r11, r11, r8 << 2 |
| + add r8, r12, r8 << 2 |
| + andl r10, 0x3 |
| + rsub r10, r10, 4 |
| + add pc, pc, r10 << 2 |
| + .irp offset,0,1,2 |
| + ld.ub r9, r11[2-\offset] |
| + st.b r8[2-\offset], r9 |
| + .endr |
| + |
| + retal r12 |
| + |
| +.Lless_than_8: |
| + rsub r10, r10, 9 |
| + add pc, pc, r10 << 2 |
| + .irp offset,0,1,2,3,4,5,6,7 |
| + ld.ub r9, r11[7-\offset] |
| + st.b r12[7-\offset], r9 |
| + .endr |
| + |
| + retal r12 |
| + |
| +.Lmore_than_31: |
| + stm --sp, r6-r7, lr |
| + mov r9, r12 |
| + |
| +.Laligned_copy: |
| + sub r10, 32 |
| + |
| +1: /* Copy 32 bytes at a time */ |
| + ld.d r6, r11++ |
| + st.d r9++, r6 |
| + ld.d r6, r11++ |
| + st.d r9++, r6 |
| + ld.d r6, r11++ |
| + st.d r9++, r6 |
| + ld.d r6, r11++ |
| + st.d r9++, r6 |
| + sub r10, 32 |
| + brge 1b |
| + |
| +.Lless_than_32: |
| + /* Copy 16 more bytes if possible */ |
| + sub r10, -16 |
| + brlt .Lless_than_16 |
| + ld.d r6, r11++ |
| + st.d r9++, r6 |
| + ld.d r6, r11++ |
| + st.d r9++, r6 |
| + sub r10, 16 |
| + |
| +.Lless_than_16: |
| + |
| + /* Do the remaining as byte copies */ |
| + neg r10 |
| + add pc, pc, r10 << 3 |
| + nop |
| + nop |
| + .irp offset,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14 |
| + ld.ub r6, r11[14-\offset],e |
| + st.b r9[14-\offset], r6,e |
| + .endr |
| + |
| + ldm sp++, r6-r7, pc |
| + |
| +.Lunaligned_copy: |
| + /* src and dst are unaligned. */ |
| +0: |
| + sub r10, 1 |
| + ld.ub r9, r11[r10] |
| + st.b r12[r10], r9 |
| + brne 0b |
| + |
| + retal r12 |
| + .size memcpy, . - memcpy |
| + |
| +#else |
| +memcpy: |
| + pref src[0] |
| + mov dst, r12 |
| + |
| + /* If we have less than 32 bytes, don't do anything fancy */ |
| + cp.w len, 32 |
| + brge .Lmore_than_31 |
| + |
| + sub len, 1 |
| + retlt r12 |
| +1: ld.ub r8, src++ |
| + st.b r12, r8 |
| + sub len, 1 |
| + brge 1b |
| + retal r12 |
| + |
| +.Lmore_than_31: |
| + pushm r0-r7, lr |
| + |
| + /* Check alignment */ |
| + mov r8, src |
| + andl r8, 31, COH |
| + brne .Lunaligned_src |
| + mov r8, dst |
| + andl r8, 3, COH |
| + brne .Lunaligned_dst |
| + |
| +.Laligned_copy: |
| + sub len, 32 |
| + brlt .Lless_than_32 |
| + |
| +1: /* Copy 32 bytes at a time */ |
| + pref src[32] |
| + ldm src, r0-r7 |
| + sub src, -32 |
| + stm dst, r0-r7 |
| + sub dst, -32 |
| + sub len, 32 |
| + brge 1b |
| + |
| +.Lless_than_32: |
| + /* Copy 16 more bytes if possible */ |
| + sub len, -16 |
| + brlt .Lless_than_16 |
| + ldm src, r0-r3 |
| + sub src, -16 |
| + sub len, 16 |
| + stm dst, r0-r3 |
| + sub dst, -16 |
| + |
| +.Lless_than_16: |
| + /* Do the remaining as byte copies */ |
| + neg len |
| + add pc, pc, len << 2 |
| + .rept 15 |
| + ld.ub r0, src++ |
| + st.b dst++, r0 |
| + .endr |
| + |
| + popm r0-r7, pc |
| + |
| +.Lunaligned_src: |
| + /* Make src cacheline-aligned. r8 = (src & 31) */ |
| + rsub r8, r8, 32 |
| + sub len, r8 |
| +1: ld.ub r0, src++ |
| + st.b dst++, r0 |
| + sub r8, 1 |
| + brne 1b |
| + |
| + /* If dst is word-aligned, we're ready to go */ |
| + pref src[0] |
| + mov r8, 3 |
| + tst dst, r8 |
| + breq .Laligned_copy |
| + |
| +.Lunaligned_dst: |
| + /* src is aligned, but dst is not. Expect bad performance */ |
| +0: |
| + ld.ub r0, src++ |
| + st.b dst++, r0 |
| + sub len, 1 |
| + brne 0b |
| + |
| + popm r0-r7, pc |
| + .size memcpy, . - memcpy |
| + |
| + |
| +#endif |
| +#endif |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S |
| --- newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,133 @@ |
| + .align 2 |
| + .global strcmp |
| + |
| +strcmp: |
| +#if !defined(__AVR32_HAS_UNALIGNED_WORD__) |
| +#ifdef __AVR32_UC__ |
| + /* Check if both strings are aligned. */ |
| + or r10, r12, r11 |
| + andl r10, 3, COH |
| + brne .Lbyte_strcmp |
| +0: |
| + ld.w r10, r12[0] |
| + ld.w r9, r11[0] |
| + tnbz r10 |
| + breq 1f |
| + cp.w r10, r9 |
| + brne 1f |
| + ld.w r10, r12[4] |
| + ld.w r9, r11[4] |
| + tnbz r10 |
| + breq 1f |
| + cp.w r10, r9 |
| + brne 1f |
| + ld.w r10, r12[8] |
| + ld.w r9, r11[8] |
| + tnbz r10 |
| + breq 1f |
| + cp.w r10, r9 |
| + brne 1f |
| + ld.w r10, r12[12] |
| + ld.w r9, r11[12] |
| + tnbz r10 |
| + breq 1f |
| + sub r12, -16 |
| + sub r11, -16 |
| + cp.w r10, r9 |
| + breq 0b |
| +1: |
| + bfextu r12, r10, 24, 8 |
| + bfextu r11, r9, 24, 8 |
| + reteq r12 |
| + sub r12, r11 |
| + retne r12 |
| + |
| + bfextu r12, r10, 16, 8 |
| + bfextu r11, r9, 16, 8 |
| + reteq r12 |
| + sub r12, r11 |
| + retne r12 |
| + |
| + bfextu r12, r10, 8, 8 |
| + bfextu r11, r9, 8, 8 |
| + reteq r12 |
| + sub r12, r11 |
| + retne r12 |
| + |
| + castu.b r10 |
| + castu.b r9 |
| + sub r10, r9 |
| + ret r10 |
| + |
| +.Lbyte_strcmp: |
| +0: |
| + ld.ub r10, r11[0] |
| + ld.ub r9, r12[0] |
| + cp.w r10, 0 |
| + reteq r9 |
| + sub r9, r10 |
| + retne r9 |
| + ld.ub r10, r11[1] |
| + ld.ub r9, r12[1] |
| + cp.w r10, 0 |
| + reteq r9 |
| + sub r9, r10 |
| + retne r9 |
| + ld.ub r10, r11[2] |
| + ld.ub r9, r12[2] |
| + cp.w r10, 0 |
| + reteq r9 |
| + sub r9, r10 |
| + retne r9 |
| + ld.ub r10, r11[3] |
| + ld.ub r9, r12[3] |
| + cp.w r10, 0 |
| + reteq r9 |
| + sub r9, r10 |
| + retne r9 |
| + sub r11, -4 |
| + sub r12, -4 |
| + rjmp 0b |
| +#else |
| +0: |
| + ld.ub r10, r11++ |
| + ld.ub r9, r12++ |
| + cp.w r10, 0 |
| + reteq r9 |
| + sub r9, r10 |
| + breq 0b |
| + ret r9 |
| +#endif |
| +#else |
| +0: |
| + ld.w r10, r12++ |
| + ld.w r9, r11++ |
| + tnbz r10 |
| + breq 1f |
| + cp.w r10, r9 |
| + breq 0b |
| + |
| +1: |
| + bfextu r12, r10, 24, 8 |
| + bfextu r11, r9, 24, 8 |
| + reteq r12 |
| + sub r12, r11 |
| + retne r12 |
| + |
| + bfextu r12, r10, 16, 8 |
| + bfextu r11, r9, 16, 8 |
| + reteq r12 |
| + sub r12, r11 |
| + retne r12 |
| + |
| + bfextu r12, r10, 8, 8 |
| + bfextu r11, r9, 8, 8 |
| + reteq r12 |
| + sub r12, r11 |
| + retne r12 |
| + |
| + castu.b r10 |
| + castu.b r9 |
| + sub r10, r9 |
| + ret r10 |
| +#endif |
| diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S |
| --- newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,39 @@ |
| + .align 2 |
| + .global strncpy |
| + |
| +strncpy : |
| +#ifdef __AVR32_UC__ |
| + mov r8, 0 |
| +0: |
| + cp.w r10, r8 |
| + reteq r12 |
| + ld.ub r9, r11[r8] |
| + st.b r12[r8], r9 |
| + sub r8, -1 |
| + cp.w r9, 0 |
| + brne 0b |
| + |
| +1: |
| + cp.w r10, r8 |
| + reteq r12 |
| + st.b r12[r8], r9 |
| + sub r8, -1 |
| + rjmp 1b |
| +#else |
| + mov r8, r12 |
| +0: |
| + sub r10, 1 |
| + ld.ub r9, r11++ |
| + retmi r12 |
| + st.b r8++, r9 |
| + cp.w r9, 0 |
| + brne 0b |
| + |
| +1: |
| + sub r10, 1 |
| + retmi r12 |
| + st.b r8++, r9 |
| + rjmp 1b |
| + |
| + |
| +#endif |
| diff -Naur newlib-1.17.0/newlib/libc/machine/configure newlib-1.17.0-new/newlib/libc/machine/configure |
| --- newlib-1.17.0/newlib/libc/machine/configure 2008-12-22 20:45:41.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/configure 2009-05-22 09:57:50.000000000 +0200 |
| @@ -1,25 +1,54 @@ |
| #! /bin/sh |
| # Guess values for system-dependent variables and create Makefiles. |
| -# Generated by GNU Autoconf 2.59 for newlib 1.17.0. |
| +# Generated by GNU Autoconf 2.61 for newlib 1.17.0. |
| # |
| -# Copyright (C) 2003 Free Software Foundation, Inc. |
| +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| # This configure script is free software; the Free Software Foundation |
| # gives unlimited permission to copy, distribute and modify it. |
| ## --------------------- ## |
| ## M4sh Initialization. ## |
| ## --------------------- ## |
| |
| -# Be Bourne compatible |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then |
| - set -o posix |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| fi |
| -DUALCASE=1; export DUALCASE # for MKS sh |
| |
| # Support unset when possible. |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| @@ -29,8 +58,43 @@ |
| fi |
| |
| |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| # Work around bugs in pre-3.0 UWIN ksh. |
| -$as_unset ENV MAIL MAILPATH |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| PS1='$ ' |
| PS2='> ' |
| PS4='+ ' |
| @@ -44,18 +108,19 @@ |
| if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| eval $as_var=C; export $as_var |
| else |
| - $as_unset $as_var |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| fi |
| done |
| |
| # Required to use basename. |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| as_basename=basename |
| else |
| as_basename=false |
| @@ -63,157 +128,388 @@ |
| |
| |
| # Name of the executable. |
| -as_me=`$as_basename "$0" || |
| +as_me=`$as_basename -- "$0" || |
| $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| - X"$0" : 'X\(/\)$' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X/"$0" | |
| - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } |
| - /^X\/\(\/\/\)$/{ s//\1/; q; } |
| - /^X\/\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| |
| +# CDPATH. |
| +$as_unset CDPATH |
| |
| -# PATH needs CR, and LINENO needs CR and PATH. |
| -# Avoid depending upon Character Ranges. |
| -as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| -as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| -as_cr_digits='0123456789' |
| -as_cr_alnum=$as_cr_Letters$as_cr_digits |
| |
| -# The user is always right. |
| -if test "${PATH_SEPARATOR+set}" != set; then |
| - echo "#! /bin/sh" >conf$$.sh |
| - echo "exit 0" >>conf$$.sh |
| - chmod +x conf$$.sh |
| - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| - PATH_SEPARATOR=';' |
| - else |
| - PATH_SEPARATOR=: |
| - fi |
| - rm -f conf$$.sh |
| +if test "x$CONFIG_SHELL" = x; then |
| + if (eval ":") 2>/dev/null; then |
| + as_have_required=yes |
| +else |
| + as_have_required=no |
| fi |
| |
| + if test $as_have_required = yes && (eval ": |
| +(as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| |
| - as_lineno_1=$LINENO |
| - as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| - test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" || { |
| - # Find who we are. Look in the path if we contain no path at all |
| - # relative or not. |
| - case $0 in |
| - *[\\/]* ) as_myself=$0 ;; |
| - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in $PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| -done |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| |
| - ;; |
| - esac |
| - # We did not find ourselves, most probably we were run as `sh COMMAND' |
| - # in which case we are not to be found in the path. |
| - if test "x$as_myself" = x; then |
| - as_myself=$0 |
| - fi |
| - if test ! -f "$as_myself"; then |
| - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 |
| - { (exit 1); exit 1; }; } |
| - fi |
| - case $CONFIG_SHELL in |
| - '') |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| + as_lineno_1=\$LINENO |
| + as_lineno_2=\$LINENO |
| + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && |
| + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } |
| +") 2> /dev/null; then |
| + : |
| +else |
| + as_candidate_shells= |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| - for as_base in sh bash ksh sh5; do |
| - case $as_dir in |
| + case $as_dir in |
| /*) |
| - if ("$as_dir/$as_base" -c ' |
| + for as_base in sh bash ksh sh5; do |
| + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" |
| + done;; |
| + esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| + for as_shell in $as_candidate_shells $SHELL; do |
| + # Try only shells that exist, to save several forks. |
| + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && |
| + { ("$as_shell") 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +_ASEOF |
| +}; then |
| + CONFIG_SHELL=$as_shell |
| + as_have_required=yes |
| + if { "$as_shell" 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +(as_func_return () { |
| + (exit $1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = "$1" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test $exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| as_lineno_1=$LINENO |
| as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then |
| - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } |
| - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } |
| - CONFIG_SHELL=$as_dir/$as_base |
| - export CONFIG_SHELL |
| - exec "$CONFIG_SHELL" "$0" ${1+"$@"} |
| - fi;; |
| - esac |
| - done |
| -done |
| -;; |
| - esac |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } |
| + |
| +_ASEOF |
| +}; then |
| + break |
| +fi |
| + |
| +fi |
| + |
| + done |
| + |
| + if test "x$CONFIG_SHELL" != x; then |
| + for as_var in BASH_ENV ENV |
| + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + done |
| + export CONFIG_SHELL |
| + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} |
| +fi |
| + |
| + |
| + if test $as_have_required = no; then |
| + echo This script requires a shell more modern than all the |
| + echo shells that I found on your system. Please install a |
| + echo modern shell, or manually run the script under such a |
| + echo shell if you do have one. |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| + |
| +fi |
| + |
| +fi |
| + |
| + |
| + |
| +(eval "as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0") || { |
| + echo No shell found that supports shell functions. |
| + echo Please tell autoconf@gnu.org about your system, |
| + echo including any error possibly output before this |
| + echo message |
| +} |
| + |
| + |
| + |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| |
| # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| # uniformly replaced by the line number. The first 'sed' inserts a |
| - # line-number line before each line; the second 'sed' does the real |
| - # work. The second script uses 'N' to pair each line-number line |
| - # with the numbered line, and appends trailing '-' during |
| - # substitution so that $LINENO is not a special case at line end. |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) |
| - sed '=' <$as_myself | |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| N |
| - s,$,-, |
| - : loop |
| - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| t loop |
| - s,-$,, |
| - s,^['$as_cr_digits']*\n,, |
| + s/-\n.*// |
| ' >$as_me.lineno && |
| - chmod +x $as_me.lineno || |
| + chmod +x "$as_me.lineno" || |
| { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| { (exit 1); exit 1; }; } |
| |
| # Don't try to exec as it changes $[0], causing all sort of problems |
| # (the dirname of $[0] is not the place where we might find the |
| - # original and so on. Autoconf is especially sensible to this). |
| - . ./$as_me.lineno |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| # Exit status is that of the last command. |
| exit |
| } |
| |
| |
| -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in |
| - *c*,-n*) ECHO_N= ECHO_C=' |
| -' ECHO_T=' ' ;; |
| - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; |
| - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| esac |
| |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| echo >conf$$.file |
| if ln -s conf$$.file conf$$ 2>/dev/null; then |
| - # We could just check for DJGPP; but this test a) works b) is more generic |
| - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). |
| - if test -f conf$$.exe; then |
| - # Don't use ln at all; we don't have any links |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| as_ln_s='cp -p' |
| - else |
| - as_ln_s='ln -s' |
| - fi |
| elif ln conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s=ln |
| else |
| as_ln_s='cp -p' |
| fi |
| -rm -f conf$$ conf$$.exe conf$$.file |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| |
| if mkdir -p . 2>/dev/null; then |
| as_mkdir_p=: |
| @@ -222,7 +518,28 @@ |
| as_mkdir_p=false |
| fi |
| |
| -as_executable_p="test -f" |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| |
| # Sed expression to map a string onto a valid CPP name. |
| as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| @@ -231,15 +548,6 @@ |
| as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| |
| |
| -# IFS |
| -# We need space, tab and new line, in precisely that order. |
| -as_nl=' |
| -' |
| -IFS=" $as_nl" |
| - |
| -# CDPATH. |
| -$as_unset CDPATH |
| - |
| |
| |
| # Check that we are running under the correct shell. |
| @@ -390,29 +698,26 @@ |
| |
| |
| |
| +exec 7<&0 </dev/null 6>&1 |
| + |
| # Name of the host. |
| # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, |
| # so uname gets run too. |
| ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` |
| |
| -exec 6>&1 |
| - |
| # |
| # Initializations. |
| # |
| ac_default_prefix=/usr/local |
| +ac_clean_files= |
| ac_config_libobj_dir=. |
| +LIBOBJS= |
| cross_compiling=no |
| subdirs= |
| MFLAGS= |
| MAKEFLAGS= |
| SHELL=${CONFIG_SHELL-/bin/sh} |
| |
| -# Maximum number of lines to put in a shell here document. |
| -# This variable seems obsolete. It should probably be removed, and |
| -# only ac_max_sed_lines should be used. |
| -: ${ac_max_here_lines=38} |
| - |
| # Identity of this package. |
| PACKAGE_NAME='newlib' |
| PACKAGE_TARNAME='newlib' |
| @@ -424,81 +729,228 @@ |
| # Factoring default headers for most tests. |
| ac_includes_default="\ |
| #include <stdio.h> |
| -#if HAVE_SYS_TYPES_H |
| +#ifdef HAVE_SYS_TYPES_H |
| # include <sys/types.h> |
| #endif |
| -#if HAVE_SYS_STAT_H |
| +#ifdef HAVE_SYS_STAT_H |
| # include <sys/stat.h> |
| #endif |
| -#if STDC_HEADERS |
| +#ifdef STDC_HEADERS |
| # include <stdlib.h> |
| # include <stddef.h> |
| #else |
| -# if HAVE_STDLIB_H |
| +# ifdef HAVE_STDLIB_H |
| # include <stdlib.h> |
| # endif |
| #endif |
| -#if HAVE_STRING_H |
| -# if !STDC_HEADERS && HAVE_MEMORY_H |
| +#ifdef HAVE_STRING_H |
| +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H |
| # include <memory.h> |
| # endif |
| # include <string.h> |
| #endif |
| -#if HAVE_STRINGS_H |
| +#ifdef HAVE_STRINGS_H |
| # include <strings.h> |
| #endif |
| -#if HAVE_INTTYPES_H |
| +#ifdef HAVE_INTTYPES_H |
| # include <inttypes.h> |
| -#else |
| -# if HAVE_STDINT_H |
| -# include <stdint.h> |
| -# endif |
| #endif |
| -#if HAVE_UNISTD_H |
| +#ifdef HAVE_STDINT_H |
| +# include <stdint.h> |
| +#endif |
| +#ifdef HAVE_UNISTD_H |
| # include <unistd.h> |
| #endif" |
| |
| -ac_subdirs_all="$ac_subdirs_all a29k" |
| -ac_subdirs_all="$ac_subdirs_all arm" |
| -ac_subdirs_all="$ac_subdirs_all bfin" |
| -ac_subdirs_all="$ac_subdirs_all cris" |
| -ac_subdirs_all="$ac_subdirs_all crx" |
| -ac_subdirs_all="$ac_subdirs_all d10v" |
| -ac_subdirs_all="$ac_subdirs_all d30v" |
| -ac_subdirs_all="$ac_subdirs_all fr30" |
| -ac_subdirs_all="$ac_subdirs_all frv" |
| -ac_subdirs_all="$ac_subdirs_all h8300" |
| -ac_subdirs_all="$ac_subdirs_all h8500" |
| -ac_subdirs_all="$ac_subdirs_all hppa" |
| -ac_subdirs_all="$ac_subdirs_all i386" |
| -ac_subdirs_all="$ac_subdirs_all i960" |
| -ac_subdirs_all="$ac_subdirs_all iq2000" |
| -ac_subdirs_all="$ac_subdirs_all lm32" |
| -ac_subdirs_all="$ac_subdirs_all m32c" |
| -ac_subdirs_all="$ac_subdirs_all m32r" |
| -ac_subdirs_all="$ac_subdirs_all m68hc11" |
| -ac_subdirs_all="$ac_subdirs_all m68k" |
| -ac_subdirs_all="$ac_subdirs_all m88k" |
| -ac_subdirs_all="$ac_subdirs_all mep" |
| -ac_subdirs_all="$ac_subdirs_all mips" |
| -ac_subdirs_all="$ac_subdirs_all mn10200" |
| -ac_subdirs_all="$ac_subdirs_all mn10300" |
| -ac_subdirs_all="$ac_subdirs_all mt" |
| -ac_subdirs_all="$ac_subdirs_all necv70" |
| -ac_subdirs_all="$ac_subdirs_all powerpc" |
| -ac_subdirs_all="$ac_subdirs_all sh" |
| -ac_subdirs_all="$ac_subdirs_all sparc" |
| -ac_subdirs_all="$ac_subdirs_all spu" |
| -ac_subdirs_all="$ac_subdirs_all tic4x" |
| -ac_subdirs_all="$ac_subdirs_all tic80" |
| -ac_subdirs_all="$ac_subdirs_all v850" |
| -ac_subdirs_all="$ac_subdirs_all w65" |
| -ac_subdirs_all="$ac_subdirs_all x86_64" |
| -ac_subdirs_all="$ac_subdirs_all xscale" |
| -ac_subdirs_all="$ac_subdirs_all xstormy16" |
| -ac_subdirs_all="$ac_subdirs_all z8k" |
| -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs HAVE_MACHINE_DIR_TRUE HAVE_MACHINE_DIR_FALSE LIBOBJS LTLIBOBJS' |
| +ac_subst_vars='SHELL |
| +PATH_SEPARATOR |
| +PACKAGE_NAME |
| +PACKAGE_TARNAME |
| +PACKAGE_VERSION |
| +PACKAGE_STRING |
| +PACKAGE_BUGREPORT |
| +exec_prefix |
| +prefix |
| +program_transform_name |
| +bindir |
| +sbindir |
| +libexecdir |
| +datarootdir |
| +datadir |
| +sysconfdir |
| +sharedstatedir |
| +localstatedir |
| +includedir |
| +oldincludedir |
| +docdir |
| +infodir |
| +htmldir |
| +dvidir |
| +pdfdir |
| +psdir |
| +libdir |
| +localedir |
| +mandir |
| +DEFS |
| +ECHO_C |
| +ECHO_N |
| +ECHO_T |
| +LIBS |
| +build_alias |
| +host_alias |
| +target_alias |
| +MAY_SUPPLY_SYSCALLS_TRUE |
| +MAY_SUPPLY_SYSCALLS_FALSE |
| +newlib_basedir |
| +build |
| +build_cpu |
| +build_vendor |
| +build_os |
| +host |
| +host_cpu |
| +host_vendor |
| +host_os |
| +INSTALL_PROGRAM |
| +INSTALL_SCRIPT |
| +INSTALL_DATA |
| +CYGPATH_W |
| +PACKAGE |
| +VERSION |
| +ACLOCAL |
| +AUTOCONF |
| +AUTOMAKE |
| +AUTOHEADER |
| +MAKEINFO |
| +install_sh |
| +STRIP |
| +INSTALL_STRIP_PROGRAM |
| +mkdir_p |
| +AWK |
| +SET_MAKE |
| +am__leading_dot |
| +AMTAR |
| +am__tar |
| +am__untar |
| +CC |
| +DEPDIR |
| +am__include |
| +am__quote |
| +AMDEP_TRUE |
| +AMDEP_FALSE |
| +AMDEPBACKSLASH |
| +CCDEPMODE |
| +am__fastdepCC_TRUE |
| +am__fastdepCC_FALSE |
| +AS |
| +AR |
| +RANLIB |
| +READELF |
| +MAINTAINER_MODE_TRUE |
| +MAINTAINER_MODE_FALSE |
| +MAINT |
| +CCAS |
| +CCASFLAGS |
| +NEWLIB_CFLAGS |
| +LDFLAGS |
| +ELIX_LEVEL_0_TRUE |
| +ELIX_LEVEL_0_FALSE |
| +ELIX_LEVEL_1_TRUE |
| +ELIX_LEVEL_1_FALSE |
| +ELIX_LEVEL_2_TRUE |
| +ELIX_LEVEL_2_FALSE |
| +ELIX_LEVEL_3_TRUE |
| +ELIX_LEVEL_3_FALSE |
| +ELIX_LEVEL_4_TRUE |
| +ELIX_LEVEL_4_FALSE |
| +USE_LIBTOOL_TRUE |
| +USE_LIBTOOL_FALSE |
| +OBJEXT |
| +oext |
| +aext |
| +lpfx |
| +libm_machine_dir |
| +machine_dir |
| +sys_dir |
| +SED |
| +DLLTOOL |
| +OBJDUMP |
| +LIBTOOL |
| +CFLAGS |
| +CPPFLAGS |
| +ac_ct_CC |
| +EXEEXT |
| +GREP |
| +EGREP |
| +FGREP |
| +LD |
| +DUMPBIN |
| +ac_ct_DUMPBIN |
| +NM |
| +LN_S |
| +lt_ECHO |
| +DSYMUTIL |
| +NMEDIT |
| +LIPO |
| +OTOOL |
| +OTOOL64 |
| +CPP |
| +subdirs |
| +HAVE_MACHINE_DIR_TRUE |
| +HAVE_MACHINE_DIR_FALSE |
| +LIBOBJS |
| +LTLIBOBJS' |
| ac_subst_files='' |
| + ac_precious_vars='build_alias |
| +host_alias |
| +target_alias |
| +CCAS |
| +CCASFLAGS |
| +CC |
| +CFLAGS |
| +LDFLAGS |
| +LIBS |
| +CPPFLAGS |
| +CPP' |
| +ac_subdirs_all='a29k |
| +arm |
| +avr32 |
| +bfin |
| +cris |
| +crx |
| +d10v |
| +d30v |
| +fr30 |
| +frv |
| +h8300 |
| +h8500 |
| +hppa |
| +i386 |
| +i960 |
| +iq2000 |
| +lm32 |
| +m32c |
| +m32r |
| +m68hc11 |
| +m68k |
| +m88k |
| +mep |
| +mips |
| +mn10200 |
| +mn10300 |
| +mt |
| +necv70 |
| +powerpc |
| +sh |
| +sparc |
| +spu |
| +tic4x |
| +tic80 |
| +v850 |
| +w65 |
| +x86_64 |
| +xscale |
| +xstormy16 |
| +z8k' |
| |
| # Initialize some variables set by options. |
| ac_init_help= |
| @@ -525,34 +977,48 @@ |
| # and all the variables that are supposed to be based on exec_prefix |
| # by default will actually change. |
| # Use braces instead of parens because sh, perl, etc. also accept them. |
| +# (The list follows the same order as the GNU Coding Standards.) |
| bindir='${exec_prefix}/bin' |
| sbindir='${exec_prefix}/sbin' |
| libexecdir='${exec_prefix}/libexec' |
| -datadir='${prefix}/share' |
| +datarootdir='${prefix}/share' |
| +datadir='${datarootdir}' |
| sysconfdir='${prefix}/etc' |
| sharedstatedir='${prefix}/com' |
| localstatedir='${prefix}/var' |
| -libdir='${exec_prefix}/lib' |
| includedir='${prefix}/include' |
| oldincludedir='/usr/include' |
| -infodir='${prefix}/info' |
| -mandir='${prefix}/man' |
| +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' |
| +infodir='${datarootdir}/info' |
| +htmldir='${docdir}' |
| +dvidir='${docdir}' |
| +pdfdir='${docdir}' |
| +psdir='${docdir}' |
| +libdir='${exec_prefix}/lib' |
| +localedir='${datarootdir}/locale' |
| +mandir='${datarootdir}/man' |
| |
| ac_prev= |
| +ac_dashdash= |
| for ac_option |
| do |
| # If the previous option needs an argument, assign it. |
| if test -n "$ac_prev"; then |
| - eval "$ac_prev=\$ac_option" |
| + eval $ac_prev=\$ac_option |
| ac_prev= |
| continue |
| fi |
| |
| - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` |
| + case $ac_option in |
| + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; |
| + *) ac_optarg=yes ;; |
| + esac |
| |
| # Accept the important Cygnus configure options, so we can diagnose typos. |
| |
| - case $ac_option in |
| + case $ac_dashdash$ac_option in |
| + --) |
| + ac_dashdash=yes ;; |
| |
| -bindir | --bindir | --bindi | --bind | --bin | --bi) |
| ac_prev=bindir ;; |
| @@ -574,33 +1040,45 @@ |
| --config-cache | -C) |
| cache_file=config.cache ;; |
| |
| - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) |
| + -datadir | --datadir | --datadi | --datad) |
| ac_prev=datadir ;; |
| - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ |
| - | --da=*) |
| + -datadir=* | --datadir=* | --datadi=* | --datad=*) |
| datadir=$ac_optarg ;; |
| |
| + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ |
| + | --dataroo | --dataro | --datar) |
| + ac_prev=datarootdir ;; |
| + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ |
| + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) |
| + datarootdir=$ac_optarg ;; |
| + |
| -disable-* | --disable-*) |
| ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_feature=`echo $ac_feature | sed 's/-/_/g'` |
| - eval "enable_$ac_feature=no" ;; |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=no ;; |
| + |
| + -docdir | --docdir | --docdi | --doc | --do) |
| + ac_prev=docdir ;; |
| + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) |
| + docdir=$ac_optarg ;; |
| + |
| + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) |
| + ac_prev=dvidir ;; |
| + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) |
| + dvidir=$ac_optarg ;; |
| |
| -enable-* | --enable-*) |
| ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_feature=`echo $ac_feature | sed 's/-/_/g'` |
| - case $ac_option in |
| - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; |
| - *) ac_optarg=yes ;; |
| - esac |
| - eval "enable_$ac_feature='$ac_optarg'" ;; |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=\$ac_optarg ;; |
| |
| -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| @@ -627,6 +1105,12 @@ |
| -host=* | --host=* | --hos=* | --ho=*) |
| host_alias=$ac_optarg ;; |
| |
| + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) |
| + ac_prev=htmldir ;; |
| + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ |
| + | --ht=*) |
| + htmldir=$ac_optarg ;; |
| + |
| -includedir | --includedir | --includedi | --included | --include \ |
| | --includ | --inclu | --incl | --inc) |
| ac_prev=includedir ;; |
| @@ -651,13 +1135,16 @@ |
| | --libexe=* | --libex=* | --libe=*) |
| libexecdir=$ac_optarg ;; |
| |
| + -localedir | --localedir | --localedi | --localed | --locale) |
| + ac_prev=localedir ;; |
| + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) |
| + localedir=$ac_optarg ;; |
| + |
| -localstatedir | --localstatedir | --localstatedi | --localstated \ |
| - | --localstate | --localstat | --localsta | --localst \ |
| - | --locals | --local | --loca | --loc | --lo) |
| + | --localstate | --localstat | --localsta | --localst | --locals) |
| ac_prev=localstatedir ;; |
| -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ |
| - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) |
| + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) |
| localstatedir=$ac_optarg ;; |
| |
| -mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
| @@ -722,6 +1209,16 @@ |
| | --progr-tra=* | --program-tr=* | --program-t=*) |
| program_transform_name=$ac_optarg ;; |
| |
| + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) |
| + ac_prev=pdfdir ;; |
| + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) |
| + pdfdir=$ac_optarg ;; |
| + |
| + -psdir | --psdir | --psdi | --psd | --ps) |
| + ac_prev=psdir ;; |
| + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) |
| + psdir=$ac_optarg ;; |
| + |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil) |
| silent=yes ;; |
| @@ -774,24 +1271,20 @@ |
| -with-* | --with-*) |
| ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_package=`echo $ac_package| sed 's/-/_/g'` |
| - case $ac_option in |
| - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; |
| - *) ac_optarg=yes ;; |
| - esac |
| - eval "with_$ac_package='$ac_optarg'" ;; |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=\$ac_optarg ;; |
| |
| -without-* | --without-*) |
| ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_package=`echo $ac_package | sed 's/-/_/g'` |
| - eval "with_$ac_package=no" ;; |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=no ;; |
| |
| --x) |
| # Obsolete; use --with-x. |
| @@ -822,8 +1315,7 @@ |
| expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` |
| - eval "$ac_envvar='$ac_optarg'" |
| + eval $ac_envvar=\$ac_optarg |
| export $ac_envvar ;; |
| |
| *) |
| @@ -843,27 +1335,19 @@ |
| { (exit 1); exit 1; }; } |
| fi |
| |
| -# Be sure to have absolute paths. |
| -for ac_var in exec_prefix prefix |
| -do |
| - eval ac_val=$`echo $ac_var` |
| - case $ac_val in |
| - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; |
| - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| - { (exit 1); exit 1; }; };; |
| - esac |
| -done |
| - |
| -# Be sure to have absolute paths. |
| -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ |
| - localstatedir libdir includedir oldincludedir infodir mandir |
| +# Be sure to have absolute directory names. |
| +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ |
| + datadir sysconfdir sharedstatedir localstatedir includedir \ |
| + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ |
| + libdir localedir mandir |
| do |
| - eval ac_val=$`echo $ac_var` |
| + eval ac_val=\$$ac_var |
| case $ac_val in |
| - [\\/$]* | ?:[\\/]* ) ;; |
| - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| - { (exit 1); exit 1; }; };; |
| + [\\/$]* | ?:[\\/]* ) continue;; |
| + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; |
| esac |
| + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| + { (exit 1); exit 1; }; } |
| done |
| |
| # There might be people who depend on the old broken behavior: `$host' |
| @@ -890,82 +1374,76 @@ |
| test "$silent" = yes && exec 6>/dev/null |
| |
| |
| +ac_pwd=`pwd` && test -n "$ac_pwd" && |
| +ac_ls_di=`ls -di .` && |
| +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || |
| + { echo "$as_me: error: Working directory cannot be determined" >&2 |
| + { (exit 1); exit 1; }; } |
| +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || |
| + { echo "$as_me: error: pwd does not report name of working directory" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + |
| # Find the source files, if location was not specified. |
| if test -z "$srcdir"; then |
| ac_srcdir_defaulted=yes |
| - # Try the directory containing this script, then its parent. |
| - ac_confdir=`(dirname "$0") 2>/dev/null || |
| + # Try the directory containing this script, then the parent directory. |
| + ac_confdir=`$as_dirname -- "$0" || |
| $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$0" : 'X\(//\)[^/]' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| - X"$0" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$0" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| srcdir=$ac_confdir |
| - if test ! -r $srcdir/$ac_unique_file; then |
| + if test ! -r "$srcdir/$ac_unique_file"; then |
| srcdir=.. |
| fi |
| else |
| ac_srcdir_defaulted=no |
| fi |
| -if test ! -r $srcdir/$ac_unique_file; then |
| - if test "$ac_srcdir_defaulted" = yes; then |
| - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 |
| - { (exit 1); exit 1; }; } |
| - else |
| - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
| - { (exit 1); exit 1; }; } |
| - fi |
| -fi |
| -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || |
| - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 |
| - { (exit 1); exit 1; }; } |
| -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` |
| -ac_env_build_alias_set=${build_alias+set} |
| -ac_env_build_alias_value=$build_alias |
| -ac_cv_env_build_alias_set=${build_alias+set} |
| -ac_cv_env_build_alias_value=$build_alias |
| -ac_env_host_alias_set=${host_alias+set} |
| -ac_env_host_alias_value=$host_alias |
| -ac_cv_env_host_alias_set=${host_alias+set} |
| -ac_cv_env_host_alias_value=$host_alias |
| -ac_env_target_alias_set=${target_alias+set} |
| -ac_env_target_alias_value=$target_alias |
| -ac_cv_env_target_alias_set=${target_alias+set} |
| -ac_cv_env_target_alias_value=$target_alias |
| -ac_env_CCAS_set=${CCAS+set} |
| -ac_env_CCAS_value=$CCAS |
| -ac_cv_env_CCAS_set=${CCAS+set} |
| -ac_cv_env_CCAS_value=$CCAS |
| -ac_env_CCASFLAGS_set=${CCASFLAGS+set} |
| -ac_env_CCASFLAGS_value=$CCASFLAGS |
| -ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set} |
| -ac_cv_env_CCASFLAGS_value=$CCASFLAGS |
| -ac_env_CC_set=${CC+set} |
| -ac_env_CC_value=$CC |
| -ac_cv_env_CC_set=${CC+set} |
| -ac_cv_env_CC_value=$CC |
| -ac_env_CFLAGS_set=${CFLAGS+set} |
| -ac_env_CFLAGS_value=$CFLAGS |
| -ac_cv_env_CFLAGS_set=${CFLAGS+set} |
| -ac_cv_env_CFLAGS_value=$CFLAGS |
| -ac_env_LDFLAGS_set=${LDFLAGS+set} |
| -ac_env_LDFLAGS_value=$LDFLAGS |
| -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} |
| -ac_cv_env_LDFLAGS_value=$LDFLAGS |
| -ac_env_CPPFLAGS_set=${CPPFLAGS+set} |
| -ac_env_CPPFLAGS_value=$CPPFLAGS |
| -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} |
| -ac_cv_env_CPPFLAGS_value=$CPPFLAGS |
| -ac_env_CPP_set=${CPP+set} |
| -ac_env_CPP_value=$CPP |
| -ac_cv_env_CPP_set=${CPP+set} |
| -ac_cv_env_CPP_value=$CPP |
| +if test ! -r "$srcdir/$ac_unique_file"; then |
| + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." |
| + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
| + { (exit 1); exit 1; }; } |
| +fi |
| +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" |
| +ac_abs_confdir=`( |
| + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 |
| + { (exit 1); exit 1; }; } |
| + pwd)` |
| +# When building in place, set srcdir=. |
| +if test "$ac_abs_confdir" = "$ac_pwd"; then |
| + srcdir=. |
| +fi |
| +# Remove unnecessary trailing slashes from srcdir. |
| +# Double slashes in file names in object file debugging info |
| +# mess up M-x gdb in Emacs. |
| +case $srcdir in |
| +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; |
| +esac |
| +for ac_var in $ac_precious_vars; do |
| + eval ac_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_env_${ac_var}_value=\$${ac_var} |
| + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_cv_env_${ac_var}_value=\$${ac_var} |
| +done |
| |
| # |
| # Report the --help message. |
| @@ -994,9 +1472,6 @@ |
| -n, --no-create do not create output files |
| --srcdir=DIR find the sources in DIR [configure dir or \`..'] |
| |
| -_ACEOF |
| - |
| - cat <<_ACEOF |
| Installation directories: |
| --prefix=PREFIX install architecture-independent files in PREFIX |
| [$ac_default_prefix] |
| @@ -1014,15 +1489,22 @@ |
| --bindir=DIR user executables [EPREFIX/bin] |
| --sbindir=DIR system admin executables [EPREFIX/sbin] |
| --libexecdir=DIR program executables [EPREFIX/libexec] |
| - --datadir=DIR read-only architecture-independent data [PREFIX/share] |
| --sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
| --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
| --localstatedir=DIR modifiable single-machine data [PREFIX/var] |
| --libdir=DIR object code libraries [EPREFIX/lib] |
| --includedir=DIR C header files [PREFIX/include] |
| --oldincludedir=DIR C header files for non-gcc [/usr/include] |
| - --infodir=DIR info documentation [PREFIX/info] |
| - --mandir=DIR man documentation [PREFIX/man] |
| + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] |
| + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] |
| + --infodir=DIR info documentation [DATAROOTDIR/info] |
| + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] |
| + --mandir=DIR man documentation [DATAROOTDIR/man] |
| + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] |
| + --htmldir=DIR html documentation [DOCDIR] |
| + --dvidir=DIR dvi documentation [DOCDIR] |
| + --pdfdir=DIR pdf documentation [DOCDIR] |
| + --psdir=DIR ps documentation [DOCDIR] |
| _ACEOF |
| |
| cat <<\_ACEOF |
| @@ -1059,10 +1541,8 @@ |
| --enable-dependency-tracking do not reject slow dependency extractors |
| --enable-maintainer-mode enable make rules and dependencies not useful |
| (and sometimes confusing) to the casual installer |
| - --enable-shared[=PKGS] |
| - build shared libraries [default=yes] |
| - --enable-static[=PKGS] |
| - build static libraries [default=yes] |
| + --enable-shared[=PKGS] build shared libraries [default=yes] |
| + --enable-static[=PKGS] build static libraries [default=yes] |
| --enable-fast-install[=PKGS] |
| optimize for fast installation [default=yes] |
| --disable-libtool-lock avoid locking (might break parallel builds) |
| @@ -1081,128 +1561,95 @@ |
| CFLAGS C compiler flags |
| LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a |
| nonstandard directory <lib dir> |
| - CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have |
| - headers in a nonstandard directory <include dir> |
| + LIBS libraries to pass to the linker, e.g. -l<library> |
| + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if |
| + you have headers in a nonstandard directory <include dir> |
| CPP C preprocessor |
| |
| Use these variables to override the choices made by `configure' or to help |
| it to find libraries and programs with nonstandard names/locations. |
| |
| _ACEOF |
| +ac_status=$? |
| fi |
| |
| if test "$ac_init_help" = "recursive"; then |
| # If there are subdirs, report their specific --help. |
| - ac_popdir=`pwd` |
| for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue |
| - test -d $ac_dir || continue |
| + test -d "$ac_dir" || continue |
| ac_builddir=. |
| |
| -if test "$ac_dir" != .; then |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| + .) # We are building in place. |
| ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| - |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| - cd $ac_dir |
| - # Check for guested configure; otherwise get Cygnus style configure. |
| - if test -f $ac_srcdir/configure.gnu; then |
| - echo |
| - $SHELL $ac_srcdir/configure.gnu --help=recursive |
| - elif test -f $ac_srcdir/configure; then |
| - echo |
| - $SHELL $ac_srcdir/configure --help=recursive |
| - elif test -f $ac_srcdir/configure.ac || |
| - test -f $ac_srcdir/configure.in; then |
| - echo |
| - $ac_configure --help |
| + cd "$ac_dir" || { ac_status=$?; continue; } |
| + # Check for guested configure. |
| + if test -f "$ac_srcdir/configure.gnu"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure.gnu" --help=recursive |
| + elif test -f "$ac_srcdir/configure"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure" --help=recursive |
| else |
| echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 |
| - fi |
| - cd $ac_popdir |
| + fi || ac_status=$? |
| + cd "$ac_pwd" || { ac_status=$?; break; } |
| done |
| fi |
| |
| -test -n "$ac_init_help" && exit 0 |
| +test -n "$ac_init_help" && exit $ac_status |
| if $ac_init_version; then |
| cat <<\_ACEOF |
| newlib configure 1.17.0 |
| -generated by GNU Autoconf 2.59 |
| +generated by GNU Autoconf 2.61 |
| |
| -Copyright (C) 2003 Free Software Foundation, Inc. |
| +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| This configure script is free software; the Free Software Foundation |
| gives unlimited permission to copy, distribute and modify it. |
| _ACEOF |
| - exit 0 |
| + exit |
| fi |
| -exec 5>config.log |
| -cat >&5 <<_ACEOF |
| +cat >config.log <<_ACEOF |
| This file contains any messages produced by compilers while |
| running configure, to aid debugging if configure makes a mistake. |
| |
| It was created by newlib $as_me 1.17.0, which was |
| -generated by GNU Autoconf 2.59. Invocation command line was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| |
| $ $0 $@ |
| |
| _ACEOF |
| +exec 5>>config.log |
| { |
| cat <<_ASUNAME |
| ## --------- ## |
| @@ -1221,7 +1668,7 @@ |
| /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` |
| /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` |
| /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` |
| -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` |
| +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` |
| /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` |
| /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` |
| /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` |
| @@ -1235,6 +1682,7 @@ |
| test -z "$as_dir" && as_dir=. |
| echo "PATH: $as_dir" |
| done |
| +IFS=$as_save_IFS |
| |
| } >&5 |
| |
| @@ -1256,7 +1704,6 @@ |
| ac_configure_args= |
| ac_configure_args0= |
| ac_configure_args1= |
| -ac_sep= |
| ac_must_keep_next=false |
| for ac_pass in 1 2 |
| do |
| @@ -1267,7 +1714,7 @@ |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil) |
| continue ;; |
| - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) |
| + *\'*) |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| esac |
| case $ac_pass in |
| @@ -1289,9 +1736,7 @@ |
| -* ) ac_must_keep_next=true ;; |
| esac |
| fi |
| - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" |
| - # Get rid of the leading space. |
| - ac_sep=" " |
| + ac_configure_args="$ac_configure_args '$ac_arg'" |
| ;; |
| esac |
| done |
| @@ -1302,8 +1747,8 @@ |
| # When interrupted or exit'd, cleanup temporary files, and complete |
| # config.log. We remove comments because anyway the quotes in there |
| # would cause problems or look ugly. |
| -# WARNING: Be sure not to use single quotes in there, as some shells, |
| -# such as our DU 5.0 friend, will then `close' the trap. |
| +# WARNING: Use '\'' to represent an apostrophe within the trap. |
| +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. |
| trap 'exit_status=$? |
| # Save into config.log some information that might help in debugging. |
| { |
| @@ -1316,20 +1761,34 @@ |
| _ASBOX |
| echo |
| # The following way of writing the cache mishandles newlines in values, |
| -{ |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| (set) 2>&1 | |
| - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in |
| - *ac_space=\ *) |
| + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| sed -n \ |
| - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; |
| - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" |
| - ;; |
| + "s/'\''/'\''\\\\'\'''\''/g; |
| + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" |
| + ;; #( |
| *) |
| - sed -n \ |
| - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| ;; |
| - esac; |
| -} |
| + esac | |
| + sort |
| +) |
| echo |
| |
| cat <<\_ASBOX |
| @@ -1340,22 +1799,28 @@ |
| echo |
| for ac_var in $ac_subst_vars |
| do |
| - eval ac_val=$`echo $ac_var` |
| - echo "$ac_var='"'"'$ac_val'"'"'" |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| done | sort |
| echo |
| |
| if test -n "$ac_subst_files"; then |
| cat <<\_ASBOX |
| -## ------------- ## |
| -## Output files. ## |
| -## ------------- ## |
| +## ------------------- ## |
| +## File substitutions. ## |
| +## ------------------- ## |
| _ASBOX |
| echo |
| for ac_var in $ac_subst_files |
| do |
| - eval ac_val=$`echo $ac_var` |
| - echo "$ac_var='"'"'$ac_val'"'"'" |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| done | sort |
| echo |
| fi |
| @@ -1367,26 +1832,24 @@ |
| ## ----------- ## |
| _ASBOX |
| echo |
| - sed "/^$/d" confdefs.h | sort |
| + cat confdefs.h |
| echo |
| fi |
| test "$ac_signal" != 0 && |
| echo "$as_me: caught signal $ac_signal" |
| echo "$as_me: exit $exit_status" |
| } >&5 |
| - rm -f core *.core && |
| - rm -rf conftest* confdefs* conf$$* $ac_clean_files && |
| + rm -f core *.core core.conftest.* && |
| + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && |
| exit $exit_status |
| - ' 0 |
| +' 0 |
| for ac_signal in 1 2 13 15; do |
| trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal |
| done |
| ac_signal=0 |
| |
| # confdefs.h avoids OS command line length limits that DEFS can exceed. |
| -rm -rf conftest* confdefs.h |
| -# AIX cpp loses on an empty file, so make sure it contains at least a newline. |
| -echo >confdefs.h |
| +rm -f -r conftest* confdefs.h |
| |
| # Predefined preprocessor variables. |
| |
| @@ -1417,14 +1880,17 @@ |
| |
| # Let the site file select an alternate cache file if it wants to. |
| # Prefer explicitly selected file to automatically selected ones. |
| -if test -z "$CONFIG_SITE"; then |
| - if test "x$prefix" != xNONE; then |
| - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" |
| - else |
| - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" |
| - fi |
| +if test -n "$CONFIG_SITE"; then |
| + set x "$CONFIG_SITE" |
| +elif test "x$prefix" != xNONE; then |
| + set x "$prefix/share/config.site" "$prefix/etc/config.site" |
| +else |
| + set x "$ac_default_prefix/share/config.site" \ |
| + "$ac_default_prefix/etc/config.site" |
| fi |
| -for ac_site_file in $CONFIG_SITE; do |
| +shift |
| +for ac_site_file |
| +do |
| if test -r "$ac_site_file"; then |
| { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 |
| echo "$as_me: loading site script $ac_site_file" >&6;} |
| @@ -1440,8 +1906,8 @@ |
| { echo "$as_me:$LINENO: loading cache $cache_file" >&5 |
| echo "$as_me: loading cache $cache_file" >&6;} |
| case $cache_file in |
| - [\\/]* | ?:[\\/]* ) . $cache_file;; |
| - *) . ./$cache_file;; |
| + [\\/]* | ?:[\\/]* ) . "$cache_file";; |
| + *) . "./$cache_file";; |
| esac |
| fi |
| else |
| @@ -1453,12 +1919,11 @@ |
| # Check that the precious variables saved in the cache have kept the same |
| # value. |
| ac_cache_corrupted=false |
| -for ac_var in `(set) 2>&1 | |
| - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do |
| +for ac_var in $ac_precious_vars; do |
| eval ac_old_set=\$ac_cv_env_${ac_var}_set |
| eval ac_new_set=\$ac_env_${ac_var}_set |
| - eval ac_old_val="\$ac_cv_env_${ac_var}_value" |
| - eval ac_new_val="\$ac_env_${ac_var}_value" |
| + eval ac_old_val=\$ac_cv_env_${ac_var}_value |
| + eval ac_new_val=\$ac_env_${ac_var}_value |
| case $ac_old_set,$ac_new_set in |
| set,) |
| { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 |
| @@ -1483,8 +1948,7 @@ |
| # Pass precious variables to config.status. |
| if test "$ac_new_set" = set; then |
| case $ac_new_val in |
| - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) |
| - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
| + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
| *) ac_arg=$ac_var=$ac_new_val ;; |
| esac |
| case " $ac_configure_args " in |
| @@ -1501,12 +1965,6 @@ |
| { (exit 1); exit 1; }; } |
| fi |
| |
| -ac_ext=c |
| -ac_cpp='$CPP $CPPFLAGS' |
| -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| -ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| - |
| |
| |
| |
| @@ -1531,67 +1989,92 @@ |
| |
| |
| |
| +ac_ext=c |
| +ac_cpp='$CPP $CPPFLAGS' |
| +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| +ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| |
| |
| |
| |
| ac_aux_dir= |
| -for ac_dir in ../../.. $srcdir/../../..; do |
| - if test -f $ac_dir/install-sh; then |
| +for ac_dir in ../../.. "$srcdir"/../../..; do |
| + if test -f "$ac_dir/install-sh"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/install-sh -c" |
| break |
| - elif test -f $ac_dir/install.sh; then |
| + elif test -f "$ac_dir/install.sh"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/install.sh -c" |
| break |
| - elif test -f $ac_dir/shtool; then |
| + elif test -f "$ac_dir/shtool"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/shtool install -c" |
| break |
| fi |
| done |
| if test -z "$ac_aux_dir"; then |
| - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5 |
| -echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;} |
| + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5 |
| +echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| -ac_config_guess="$SHELL $ac_aux_dir/config.guess" |
| -ac_config_sub="$SHELL $ac_aux_dir/config.sub" |
| -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. |
| + |
| +# These three variables are undocumented and unsupported, |
| +# and are intended to be withdrawn in a future Autoconf release. |
| +# They can cause serious problems if a builder's source tree is in a directory |
| +# whose full name contains unusual characters. |
| +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. |
| +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. |
| +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. |
| + |
| |
| |
| |
| # Make sure we can run config.sub. |
| -$ac_config_sub sun4 >/dev/null 2>&1 || |
| - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 |
| -echo "$as_me: error: cannot run $ac_config_sub" >&2;} |
| +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || |
| + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 |
| +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} |
| { (exit 1); exit 1; }; } |
| |
| -echo "$as_me:$LINENO: checking build system type" >&5 |
| -echo $ECHO_N "checking build system type... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking build system type" >&5 |
| +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } |
| if test "${ac_cv_build+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - ac_cv_build_alias=$build_alias |
| -test -z "$ac_cv_build_alias" && |
| - ac_cv_build_alias=`$ac_config_guess` |
| -test -z "$ac_cv_build_alias" && |
| + ac_build_alias=$build_alias |
| +test "x$ac_build_alias" = x && |
| + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` |
| +test "x$ac_build_alias" = x && |
| { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 |
| echo "$as_me: error: cannot guess build type; you must specify one" >&2;} |
| { (exit 1); exit 1; }; } |
| -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || |
| - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 |
| -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} |
| +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} |
| { (exit 1); exit 1; }; } |
| |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
| -echo "${ECHO_T}$ac_cv_build" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
| +echo "${ECHO_T}$ac_cv_build" >&6; } |
| +case $ac_cv_build in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 |
| +echo "$as_me: error: invalid value of canonical build" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| build=$ac_cv_build |
| -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
| -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
| -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_build |
| +shift |
| +build_cpu=$1 |
| +build_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +build_os=$* |
| +IFS=$ac_save_IFS |
| +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac |
| |
| |
| am__api_version="1.9" |
| @@ -1608,8 +2091,8 @@ |
| # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| # OS/2's system install, which has a completely different semantic |
| # ./install, which can be erroneously created by make from ./install.sh. |
| -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| if test -z "$INSTALL"; then |
| if test "${ac_cv_path_install+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| @@ -1631,7 +2114,7 @@ |
| # by default. |
| for ac_prog in ginstall scoinst install; do |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| if test $ac_prog = install && |
| grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| # AIX install. It has an incompatible calling convention. |
| @@ -1650,21 +2133,22 @@ |
| ;; |
| esac |
| done |
| +IFS=$as_save_IFS |
| |
| |
| fi |
| if test "${ac_cv_path_install+set}" = set; then |
| INSTALL=$ac_cv_path_install |
| else |
| - # As a last resort, use the slow shell script. We don't cache a |
| - # path for INSTALL within a source directory, because that will |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| # break other packages using the cache if that directory is |
| - # removed, or if the path is relative. |
| + # removed, or if the value is a relative name. |
| INSTALL=$ac_install_sh |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| -echo "${ECHO_T}$INSTALL" >&6 |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| |
| # Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| # It thinks the first close brace ends the variable substitution. |
| @@ -1674,8 +2158,8 @@ |
| |
| test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
| |
| -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
| -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
| +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } |
| # Just in case |
| sleep 1 |
| echo timestamp > conftest.file |
| @@ -1717,20 +2201,20 @@ |
| Check your system clock" >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| -echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| +{ echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| test "$program_prefix" != NONE && |
| - program_transform_name="s,^,$program_prefix,;$program_transform_name" |
| + program_transform_name="s&^&$program_prefix&;$program_transform_name" |
| # Use a double $ so make ignores it. |
| test "$program_suffix" != NONE && |
| - program_transform_name="s,\$,$program_suffix,;$program_transform_name" |
| + program_transform_name="s&\$&$program_suffix&;$program_transform_name" |
| # Double any \ or $. echo might interpret backslashes. |
| # By default was `s,x,x', remove it if useless. |
| cat <<\_ACEOF >conftest.sed |
| s/[\\$]/&&/g;s/;s,x,x,$// |
| _ACEOF |
| program_transform_name=`echo $program_transform_name | sed -f conftest.sed` |
| -rm conftest.sed |
| +rm -f conftest.sed |
| |
| # expand $ac_aux_dir to an absolute path |
| am_aux_dir=`cd $ac_aux_dir && pwd` |
| @@ -1782,8 +2266,8 @@ |
| do |
| # Extract the first word of "$ac_prog", so it can be a program name with args. |
| set dummy $ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AWK+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -1796,54 +2280,57 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AWK="$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AWK=$ac_cv_prog_AWK |
| if test -n "$AWK"; then |
| - echo "$as_me:$LINENO: result: $AWK" >&5 |
| -echo "${ECHO_T}$AWK" >&6 |
| + { echo "$as_me:$LINENO: result: $AWK" >&5 |
| +echo "${ECHO_T}$AWK" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$AWK" && break |
| done |
| |
| -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
| -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 |
| -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` |
| -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then |
| +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
| +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } |
| +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` |
| +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| cat >conftest.make <<\_ACEOF |
| +SHELL = /bin/sh |
| all: |
| - @echo 'ac_maketemp="$(MAKE)"' |
| + @echo '@@@%%%=$(MAKE)=@@@%%%' |
| _ACEOF |
| # GNU make sometimes prints "make[1]: Entering...", which would confuse us. |
| -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` |
| -if test -n "$ac_maketemp"; then |
| - eval ac_cv_prog_make_${ac_make}_set=yes |
| -else |
| - eval ac_cv_prog_make_${ac_make}_set=no |
| -fi |
| +case `${MAKE-make} -f conftest.make 2>/dev/null` in |
| + *@@@%%%=?*=@@@%%%*) |
| + eval ac_cv_prog_make_${ac_make}_set=yes;; |
| + *) |
| + eval ac_cv_prog_make_${ac_make}_set=no;; |
| +esac |
| rm -f conftest.make |
| fi |
| -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| SET_MAKE= |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| SET_MAKE="MAKE=${MAKE-make}" |
| fi |
| |
| @@ -1858,7 +2345,7 @@ |
| |
| DEPDIR="${am__leading_dot}deps" |
| |
| - ac_config_commands="$ac_config_commands depfiles" |
| +ac_config_commands="$ac_config_commands depfiles" |
| |
| |
| am_make=${MAKE-make} |
| @@ -1868,8 +2355,8 @@ |
| .PHONY: am__doit |
| END |
| # If we don't find an include directive, just comment out the code. |
| -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 |
| -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 |
| +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } |
| am__include="#" |
| am__quote= |
| _am_result=none |
| @@ -1896,15 +2383,15 @@ |
| fi |
| |
| |
| -echo "$as_me:$LINENO: result: $_am_result" >&5 |
| -echo "${ECHO_T}$_am_result" >&6 |
| +{ echo "$as_me:$LINENO: result: $_am_result" >&5 |
| +echo "${ECHO_T}$_am_result" >&6; } |
| rm -f confinc confmf |
| |
| -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. |
| +# Check whether --enable-dependency-tracking was given. |
| if test "${enable_dependency_tracking+set}" = set; then |
| - enableval="$enable_dependency_tracking" |
| + enableval=$enable_dependency_tracking; |
| +fi |
| |
| -fi; |
| if test "x$enable_dependency_tracking" != xno; then |
| am_depcomp="$ac_aux_dir/depcomp" |
| AMDEPBACKSLASH='\' |
| @@ -1922,10 +2409,9 @@ |
| |
| |
| |
| -# Check whether --enable-multilib or --disable-multilib was given. |
| +# Check whether --enable-multilib was given. |
| if test "${enable_multilib+set}" = set; then |
| - enableval="$enable_multilib" |
| - case "${enableval}" in |
| + enableval=$enable_multilib; case "${enableval}" in |
| yes) multilib=yes ;; |
| no) multilib=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 |
| @@ -1934,11 +2420,11 @@ |
| esac |
| else |
| multilib=yes |
| -fi; |
| -# Check whether --enable-target-optspace or --disable-target-optspace was given. |
| +fi |
| + |
| +# Check whether --enable-target-optspace was given. |
| if test "${enable_target_optspace+set}" = set; then |
| - enableval="$enable_target_optspace" |
| - case "${enableval}" in |
| + enableval=$enable_target_optspace; case "${enableval}" in |
| yes) target_optspace=yes ;; |
| no) target_optspace=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 |
| @@ -1947,11 +2433,11 @@ |
| esac |
| else |
| target_optspace= |
| -fi; |
| -# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. |
| +fi |
| + |
| +# Check whether --enable-malloc-debugging was given. |
| if test "${enable_malloc_debugging+set}" = set; then |
| - enableval="$enable_malloc_debugging" |
| - case "${enableval}" in |
| + enableval=$enable_malloc_debugging; case "${enableval}" in |
| yes) malloc_debugging=yes ;; |
| no) malloc_debugging=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 |
| @@ -1960,11 +2446,11 @@ |
| esac |
| else |
| malloc_debugging= |
| -fi; |
| -# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-multithread was given. |
| if test "${enable_newlib_multithread+set}" = set; then |
| - enableval="$enable_newlib_multithread" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_multithread; case "${enableval}" in |
| yes) newlib_multithread=yes ;; |
| no) newlib_multithread=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 |
| @@ -1973,11 +2459,11 @@ |
| esac |
| else |
| newlib_multithread=yes |
| -fi; |
| -# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-iconv was given. |
| if test "${enable_newlib_iconv+set}" = set; then |
| - enableval="$enable_newlib_iconv" |
| - if test "${newlib_iconv+set}" != set; then |
| + enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then |
| case "${enableval}" in |
| yes) newlib_iconv=yes ;; |
| no) newlib_iconv=no ;; |
| @@ -1988,11 +2474,11 @@ |
| fi |
| else |
| newlib_iconv=${newlib_iconv} |
| -fi; |
| -# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-elix-level was given. |
| if test "${enable_newlib_elix_level+set}" = set; then |
| - enableval="$enable_newlib_elix_level" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_elix_level; case "${enableval}" in |
| 0) newlib_elix_level=0 ;; |
| 1) newlib_elix_level=1 ;; |
| 2) newlib_elix_level=2 ;; |
| @@ -2004,11 +2490,11 @@ |
| esac |
| else |
| newlib_elix_level=0 |
| -fi; |
| -# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-io-float was given. |
| if test "${enable_newlib_io_float+set}" = set; then |
| - enableval="$enable_newlib_io_float" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_io_float; case "${enableval}" in |
| yes) newlib_io_float=yes ;; |
| no) newlib_io_float=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 |
| @@ -2017,11 +2503,11 @@ |
| esac |
| else |
| newlib_io_float=yes |
| -fi; |
| -# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-supplied-syscalls was given. |
| if test "${enable_newlib_supplied_syscalls+set}" = set; then |
| - enableval="$enable_newlib_supplied_syscalls" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in |
| yes) newlib_may_supply_syscalls=yes ;; |
| no) newlib_may_supply_syscalls=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 |
| @@ -2030,7 +2516,8 @@ |
| esac |
| else |
| newlib_may_supply_syscalls=yes |
| -fi; |
| +fi |
| + |
| |
| |
| if test x${newlib_may_supply_syscalls} = xyes; then |
| @@ -2056,26 +2543,41 @@ |
| fi |
| |
| |
| -echo "$as_me:$LINENO: checking host system type" >&5 |
| -echo $ECHO_N "checking host system type... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking host system type" >&5 |
| +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } |
| if test "${ac_cv_host+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - ac_cv_host_alias=$host_alias |
| -test -z "$ac_cv_host_alias" && |
| - ac_cv_host_alias=$ac_cv_build_alias |
| -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || |
| - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 |
| -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} |
| + if test "x$host_alias" = x; then |
| + ac_cv_host=$ac_cv_build |
| +else |
| + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} |
| { (exit 1); exit 1; }; } |
| +fi |
| |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
| -echo "${ECHO_T}$ac_cv_host" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
| +echo "${ECHO_T}$ac_cv_host" >&6; } |
| +case $ac_cv_host in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 |
| +echo "$as_me: error: invalid value of canonical host" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| host=$ac_cv_host |
| -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
| -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
| -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_host |
| +shift |
| +host_cpu=$1 |
| +host_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +host_os=$* |
| +IFS=$ac_save_IFS |
| +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac |
| |
| |
| |
| @@ -2128,8 +2630,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2142,32 +2644,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_STRIP="${ac_tool_prefix}strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| STRIP=$ac_cv_prog_STRIP |
| if test -n "$STRIP"; then |
| - echo "$as_me:$LINENO: result: $STRIP" >&5 |
| -echo "${ECHO_T}$STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $STRIP" >&5 |
| +echo "${ECHO_T}$STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_STRIP"; then |
| ac_ct_STRIP=$STRIP |
| # Extract the first word of "strip", so it can be a program name with args. |
| set dummy strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2180,27 +2684,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_STRIP="strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" |
| fi |
| fi |
| ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP |
| if test -n "$ac_ct_STRIP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| -echo "${ECHO_T}$ac_ct_STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| +echo "${ECHO_T}$ac_ct_STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - STRIP=$ac_ct_STRIP |
| + if test "x$ac_ct_STRIP" = x; then |
| + STRIP=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + STRIP=$ac_ct_STRIP |
| + fi |
| else |
| STRIP="$ac_cv_prog_STRIP" |
| fi |
| @@ -2235,8 +2753,8 @@ |
| |
| # Extract the first word of "gcc", so it can be a program name with args. |
| set dummy gcc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2249,30 +2767,32 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="gcc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| |
| + |
| depcc="$CC" am_compiler_list= |
| |
| -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } |
| if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2361,8 +2881,8 @@ |
| fi |
| |
| fi |
| -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 |
| +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } |
| CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
| |
| |
| @@ -2381,8 +2901,8 @@ |
| if test -z "$CC"; then |
| # Extract the first word of "cc", so it can be a program name with args. |
| set dummy cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2396,7 +2916,7 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| ac_prog_rejected=yes |
| continue |
| @@ -2407,6 +2927,7 @@ |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| if test $ac_prog_rejected = yes; then |
| # We found a bogon in the path, so make sure we never use it. |
| @@ -2424,20 +2945,21 @@ |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 |
| echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| |
| -echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 |
| -echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 |
| +echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; } |
| if test "${ac_cv_c_compiler_gnu+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2457,8 +2979,8 @@ |
| ac_cv_c_compiler_gnu=no |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } |
| |
| if test $ac_cv_c_compiler_gnu = yes; then |
| GCC=yes |
| @@ -2467,13 +2989,16 @@ |
| CFLAGS= |
| ac_test_CFLAGS=${CFLAGS+set} |
| ac_save_CFLAGS=$CFLAGS |
| -CFLAGS="-g" |
| -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_cc_g+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - cat >conftest.$ac_ext <<_ACEOF |
| + ac_save_c_werror_flag=$ac_c_werror_flag |
| + ac_c_werror_flag=yes |
| + ac_cv_prog_cc_g=no |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| _ACEOF |
| cat confdefs.h >>conftest.$ac_ext |
| @@ -2489,38 +3014,118 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + ac_cv_prog_cc_g=yes |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + CFLAGS="" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + : |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_cv_prog_cc_g=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_prog_cc_g=no |
| + |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } |
| if test "$ac_test_CFLAGS" = set; then |
| CFLAGS=$ac_save_CFLAGS |
| elif test $ac_cv_prog_cc_g = yes; then |
| @@ -2552,8 +3157,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2566,32 +3171,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AS="${ac_tool_prefix}as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AS=$ac_cv_prog_AS |
| if test -n "$AS"; then |
| - echo "$as_me:$LINENO: result: $AS" >&5 |
| -echo "${ECHO_T}$AS" >&6 |
| + { echo "$as_me:$LINENO: result: $AS" >&5 |
| +echo "${ECHO_T}$AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AS"; then |
| ac_ct_AS=$AS |
| # Extract the first word of "as", so it can be a program name with args. |
| set dummy as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2604,26 +3211,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AS="as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_AS=$ac_cv_prog_ac_ct_AS |
| if test -n "$ac_ct_AS"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| -echo "${ECHO_T}$ac_ct_AS" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| +echo "${ECHO_T}$ac_ct_AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AS=$ac_ct_AS |
| + if test "x$ac_ct_AS" = x; then |
| + AS="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AS=$ac_ct_AS |
| + fi |
| else |
| AS="$ac_cv_prog_AS" |
| fi |
| @@ -2631,8 +3253,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2645,32 +3267,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AR="${ac_tool_prefix}ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AR=$ac_cv_prog_AR |
| if test -n "$AR"; then |
| - echo "$as_me:$LINENO: result: $AR" >&5 |
| -echo "${ECHO_T}$AR" >&6 |
| + { echo "$as_me:$LINENO: result: $AR" >&5 |
| +echo "${ECHO_T}$AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AR"; then |
| ac_ct_AR=$AR |
| # Extract the first word of "ar", so it can be a program name with args. |
| set dummy ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2683,26 +3307,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AR="ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_AR=$ac_cv_prog_ac_ct_AR |
| if test -n "$ac_ct_AR"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| -echo "${ECHO_T}$ac_ct_AR" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| +echo "${ECHO_T}$ac_ct_AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AR=$ac_ct_AR |
| + if test "x$ac_ct_AR" = x; then |
| + AR="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AR=$ac_ct_AR |
| + fi |
| else |
| AR="$ac_cv_prog_AR" |
| fi |
| @@ -2710,8 +3349,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2724,32 +3363,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| RANLIB=$ac_cv_prog_RANLIB |
| if test -n "$RANLIB"; then |
| - echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| -echo "${ECHO_T}$RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| +echo "${ECHO_T}$RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_RANLIB"; then |
| ac_ct_RANLIB=$RANLIB |
| # Extract the first word of "ranlib", so it can be a program name with args. |
| set dummy ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2762,27 +3403,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_RANLIB="ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" |
| fi |
| fi |
| ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
| if test -n "$ac_ct_RANLIB"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| -echo "${ECHO_T}$ac_ct_RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - RANLIB=$ac_ct_RANLIB |
| + if test "x$ac_ct_RANLIB" = x; then |
| + RANLIB=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + RANLIB=$ac_ct_RANLIB |
| + fi |
| else |
| RANLIB="$ac_cv_prog_RANLIB" |
| fi |
| @@ -2790,8 +3445,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}readelf; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_READELF+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2804,32 +3459,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_READELF="${ac_tool_prefix}readelf" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| READELF=$ac_cv_prog_READELF |
| if test -n "$READELF"; then |
| - echo "$as_me:$LINENO: result: $READELF" >&5 |
| -echo "${ECHO_T}$READELF" >&6 |
| + { echo "$as_me:$LINENO: result: $READELF" >&5 |
| +echo "${ECHO_T}$READELF" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_READELF"; then |
| ac_ct_READELF=$READELF |
| # Extract the first word of "readelf", so it can be a program name with args. |
| set dummy readelf; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2842,27 +3499,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_READELF="readelf" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":" |
| fi |
| fi |
| ac_ct_READELF=$ac_cv_prog_ac_ct_READELF |
| if test -n "$ac_ct_READELF"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 |
| -echo "${ECHO_T}$ac_ct_READELF" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 |
| +echo "${ECHO_T}$ac_ct_READELF" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - READELF=$ac_ct_READELF |
| + if test "x$ac_ct_READELF" = x; then |
| + READELF=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + READELF=$ac_ct_READELF |
| + fi |
| else |
| READELF="$ac_cv_prog_READELF" |
| fi |
| @@ -2881,8 +3552,8 @@ |
| # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| # OS/2's system install, which has a completely different semantic |
| # ./install, which can be erroneously created by make from ./install.sh. |
| -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| if test -z "$INSTALL"; then |
| if test "${ac_cv_path_install+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| @@ -2904,7 +3575,7 @@ |
| # by default. |
| for ac_prog in ginstall scoinst install; do |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| if test $ac_prog = install && |
| grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| # AIX install. It has an incompatible calling convention. |
| @@ -2923,21 +3594,22 @@ |
| ;; |
| esac |
| done |
| +IFS=$as_save_IFS |
| |
| |
| fi |
| if test "${ac_cv_path_install+set}" = set; then |
| INSTALL=$ac_cv_path_install |
| else |
| - # As a last resort, use the slow shell script. We don't cache a |
| - # path for INSTALL within a source directory, because that will |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| # break other packages using the cache if that directory is |
| - # removed, or if the path is relative. |
| + # removed, or if the value is a relative name. |
| INSTALL=$ac_install_sh |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| -echo "${ECHO_T}$INSTALL" >&6 |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| |
| # Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| # It thinks the first close brace ends the variable substitution. |
| @@ -2951,17 +3623,17 @@ |
| # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */ |
| ac_given_INSTALL=$INSTALL |
| |
| -echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 |
| -echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 |
| - # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. |
| +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 |
| +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } |
| + # Check whether --enable-maintainer-mode was given. |
| if test "${enable_maintainer_mode+set}" = set; then |
| - enableval="$enable_maintainer_mode" |
| - USE_MAINTAINER_MODE=$enableval |
| + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval |
| else |
| USE_MAINTAINER_MODE=no |
| -fi; |
| - echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 |
| -echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 |
| +fi |
| + |
| + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 |
| +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } |
| |
| |
| if test $USE_MAINTAINER_MODE = yes; then |
| @@ -3081,64 +3753,89 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 |
| -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 |
| -if test "${lt_cv_path_SED+set}" = set; then |
| +{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 |
| +echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_SED+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ |
| + for ac_i in 1 2 3 4 5 6 7; do |
| + ac_script="$ac_script$as_nl$ac_script" |
| + done |
| + echo "$ac_script" | sed 99q >conftest.sed |
| + $as_unset ac_script || ac_script= |
| + # Extract the first word of "sed gsed" to use in msg output |
| +if test -z "$SED"; then |
| +set dummy sed gsed; ac_prog_name=$2 |
| +if test "${ac_cv_path_SED+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - # Loop through the user's path and test for sed and gsed. |
| -# Then use that list of sed's as ones to test for truncation. |
| + ac_path_SED_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| - for lt_ac_prog in sed gsed; do |
| - for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then |
| - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" |
| - fi |
| - done |
| - done |
| -done |
| -IFS=$as_save_IFS |
| -lt_ac_max=0 |
| -lt_ac_count=0 |
| -# Add /usr/xpg4/bin/sed as it is typically found on Solaris |
| -# along with /bin/sed that truncates output. |
| -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do |
| - test ! -f $lt_ac_sed && continue |
| - cat /dev/null > conftest.in |
| - lt_ac_count=0 |
| - echo $ECHO_N "0123456789$ECHO_C" >conftest.in |
| - # Check for GNU sed and select it if it is found. |
| - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then |
| - lt_cv_path_SED=$lt_ac_sed |
| - break |
| - fi |
| - while true; do |
| - cat conftest.in conftest.in >conftest.tmp |
| - mv conftest.tmp conftest.in |
| - cp conftest.in conftest.nl |
| - echo >>conftest.nl |
| - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break |
| - cmp -s conftest.out conftest.nl || break |
| - # 10000 chars as input seems more than enough |
| - test $lt_ac_count -gt 10 && break |
| - lt_ac_count=`expr $lt_ac_count + 1` |
| - if test $lt_ac_count -gt $lt_ac_max; then |
| - lt_ac_max=$lt_ac_count |
| - lt_cv_path_SED=$lt_ac_sed |
| + for ac_prog in sed gsed; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue |
| + # Check for GNU ac_path_SED and select it if it is found. |
| + # Check for GNU $ac_path_SED |
| +case `"$ac_path_SED" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo '' >> "conftest.nl" |
| + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_SED_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_SED="$ac_path_SED" |
| + ac_path_SED_max=$ac_count |
| fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| + |
| + $ac_path_SED_found && break 3 |
| done |
| done |
| |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + |
| +SED="$ac_cv_path_SED" |
| +if test -z "$SED"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} |
| + { (exit 1); exit 1; }; } |
| fi |
| |
| -SED=$lt_cv_path_SED |
| +else |
| + ac_cv_path_SED=$SED |
| +fi |
| |
| -echo "$as_me:$LINENO: result: $SED" >&5 |
| -echo "${ECHO_T}$SED" >&6 |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 |
| +echo "${ECHO_T}$ac_cv_path_SED" >&6; } |
| + SED="$ac_cv_path_SED" |
| + rm -f conftest.sed |
| |
| test -z "$SED" && SED=sed |
| Xsed="$SED -e 1s/^X//" |
| @@ -3161,8 +3858,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3175,32 +3872,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AS="${ac_tool_prefix}as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AS=$ac_cv_prog_AS |
| if test -n "$AS"; then |
| - echo "$as_me:$LINENO: result: $AS" >&5 |
| -echo "${ECHO_T}$AS" >&6 |
| + { echo "$as_me:$LINENO: result: $AS" >&5 |
| +echo "${ECHO_T}$AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AS"; then |
| ac_ct_AS=$AS |
| # Extract the first word of "as", so it can be a program name with args. |
| set dummy as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3213,27 +3912,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AS="as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false" |
| fi |
| fi |
| ac_ct_AS=$ac_cv_prog_ac_ct_AS |
| if test -n "$ac_ct_AS"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| -echo "${ECHO_T}$ac_ct_AS" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| +echo "${ECHO_T}$ac_ct_AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AS=$ac_ct_AS |
| + if test "x$ac_ct_AS" = x; then |
| + AS="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AS=$ac_ct_AS |
| + fi |
| else |
| AS="$ac_cv_prog_AS" |
| fi |
| @@ -3241,8 +3954,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}dlltool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_DLLTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3255,32 +3968,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| DLLTOOL=$ac_cv_prog_DLLTOOL |
| if test -n "$DLLTOOL"; then |
| - echo "$as_me:$LINENO: result: $DLLTOOL" >&5 |
| -echo "${ECHO_T}$DLLTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 |
| +echo "${ECHO_T}$DLLTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_DLLTOOL"; then |
| ac_ct_DLLTOOL=$DLLTOOL |
| # Extract the first word of "dlltool", so it can be a program name with args. |
| set dummy dlltool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3293,27 +4008,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_DLLTOOL="dlltool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false" |
| fi |
| fi |
| ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL |
| if test -n "$ac_ct_DLLTOOL"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 |
| -echo "${ECHO_T}$ac_ct_DLLTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 |
| +echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - DLLTOOL=$ac_ct_DLLTOOL |
| + if test "x$ac_ct_DLLTOOL" = x; then |
| + DLLTOOL="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + DLLTOOL=$ac_ct_DLLTOOL |
| + fi |
| else |
| DLLTOOL="$ac_cv_prog_DLLTOOL" |
| fi |
| @@ -3321,8 +4050,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3335,32 +4064,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OBJDUMP=$ac_cv_prog_OBJDUMP |
| if test -n "$OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| -echo "${ECHO_T}$OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| +echo "${ECHO_T}$OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OBJDUMP"; then |
| ac_ct_OBJDUMP=$OBJDUMP |
| # Extract the first word of "objdump", so it can be a program name with args. |
| set dummy objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3373,27 +4104,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OBJDUMP="objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" |
| fi |
| fi |
| ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP |
| if test -n "$ac_ct_OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OBJDUMP=$ac_ct_OBJDUMP |
| + if test "x$ac_ct_OBJDUMP" = x; then |
| + OBJDUMP="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OBJDUMP=$ac_ct_OBJDUMP |
| + fi |
| else |
| OBJDUMP="$ac_cv_prog_OBJDUMP" |
| fi |
| @@ -3454,8 +4199,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}gcc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3468,32 +4213,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="${ac_tool_prefix}gcc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_CC"; then |
| ac_ct_CC=$CC |
| # Extract the first word of "gcc", so it can be a program name with args. |
| set dummy gcc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3506,36 +4253,51 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_CC="gcc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_CC=$ac_cv_prog_ac_ct_CC |
| if test -n "$ac_ct_CC"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| -echo "${ECHO_T}$ac_ct_CC" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| +echo "${ECHO_T}$ac_ct_CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - CC=$ac_ct_CC |
| + if test "x$ac_ct_CC" = x; then |
| + CC="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + CC=$ac_ct_CC |
| + fi |
| else |
| CC="$ac_cv_prog_CC" |
| fi |
| |
| if test -z "$CC"; then |
| - if test -n "$ac_tool_prefix"; then |
| - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. |
| + if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3548,98 +4310,59 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="${ac_tool_prefix}cc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| + fi |
| fi |
| -if test -z "$ac_cv_prog_CC"; then |
| - ac_ct_CC=$CC |
| +if test -z "$CC"; then |
| # Extract the first word of "cc", so it can be a program name with args. |
| set dummy cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - if test -n "$ac_ct_CC"; then |
| - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. |
| + if test -n "$CC"; then |
| + ac_cv_prog_CC="$CC" # Let the user override the test. |
| else |
| + ac_prog_rejected=no |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| - ac_cv_prog_ac_ct_CC="cc" |
| - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| - break 2 |
| - fi |
| -done |
| -done |
| - |
| -fi |
| -fi |
| -ac_ct_CC=$ac_cv_prog_ac_ct_CC |
| -if test -n "$ac_ct_CC"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| -echo "${ECHO_T}$ac_ct_CC" >&6 |
| -else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| -fi |
| - |
| - CC=$ac_ct_CC |
| -else |
| - CC="$ac_cv_prog_CC" |
| -fi |
| - |
| -fi |
| -if test -z "$CC"; then |
| - # Extract the first word of "cc", so it can be a program name with args. |
| -set dummy cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_CC+set}" = set; then |
| - echo $ECHO_N "(cached) $ECHO_C" >&6 |
| -else |
| - if test -n "$CC"; then |
| - ac_cv_prog_CC="$CC" # Let the user override the test. |
| -else |
| - ac_prog_rejected=no |
| -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in $PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| - ac_prog_rejected=yes |
| - continue |
| - fi |
| - ac_cv_prog_CC="cc" |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| + ac_prog_rejected=yes |
| + continue |
| + fi |
| + ac_cv_prog_CC="cc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| if test $ac_prog_rejected = yes; then |
| # We found a bogon in the path, so make sure we never use it. |
| @@ -3657,22 +4380,23 @@ |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$CC"; then |
| if test -n "$ac_tool_prefix"; then |
| - for ac_prog in cl |
| + for ac_prog in cl.exe |
| do |
| # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. |
| set dummy $ac_tool_prefix$ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3685,36 +4409,38 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="$ac_tool_prefix$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$CC" && break |
| done |
| fi |
| if test -z "$CC"; then |
| ac_ct_CC=$CC |
| - for ac_prog in cl |
| + for ac_prog in cl.exe |
| do |
| # Extract the first word of "$ac_prog", so it can be a program name with args. |
| set dummy $ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3727,29 +4453,45 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_CC="$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_CC=$ac_cv_prog_ac_ct_CC |
| if test -n "$ac_ct_CC"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| -echo "${ECHO_T}$ac_ct_CC" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| +echo "${ECHO_T}$ac_ct_CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$ac_ct_CC" && break |
| done |
| |
| - CC=$ac_ct_CC |
| + if test "x$ac_ct_CC" = x; then |
| + CC="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + CC=$ac_ct_CC |
| + fi |
| fi |
| |
| fi |
| @@ -3762,21 +4504,35 @@ |
| { (exit 1); exit 1; }; } |
| |
| # Provide some information about the compiler. |
| -echo "$as_me:$LINENO:" \ |
| - "checking for C compiler version" >&5 |
| +echo "$as_me:$LINENO: checking for C compiler version" >&5 |
| ac_compiler=`set X $ac_compile; echo $2` |
| -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 |
| - (eval $ac_compiler --version </dev/null >&5) 2>&5 |
| +{ (ac_try="$ac_compiler --version >&5" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compiler --version >&5") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 |
| - (eval $ac_compiler -v </dev/null >&5) 2>&5 |
| +{ (ac_try="$ac_compiler -v >&5" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compiler -v >&5") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 |
| - (eval $ac_compiler -V </dev/null >&5) 2>&5 |
| +{ (ac_try="$ac_compiler -V >&5" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compiler -V >&5") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| @@ -3801,47 +4557,77 @@ |
| # Try to create an executable without -o first, disregard a.out. |
| # It will help us diagnose broken compilers, and finding out an intuition |
| # of exeext. |
| -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 |
| -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 |
| +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } |
| ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 |
| - (eval $ac_link_default) 2>&5 |
| +# |
| +# List of possible output files, starting from the most likely. |
| +# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) |
| +# only as a last resort. b.out is created by i960 compilers. |
| +ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' |
| +# |
| +# The IRIX 6 linker writes into existing files which may not be |
| +# executable, retaining their permissions. Remove them first so a |
| +# subsequent execution test works. |
| +ac_rmfiles= |
| +for ac_file in $ac_files |
| +do |
| + case $ac_file in |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; |
| + * ) ac_rmfiles="$ac_rmfiles $ac_file";; |
| + esac |
| +done |
| +rm -f $ac_rmfiles |
| + |
| +if { (ac_try="$ac_link_default" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link_default") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; then |
| - # Find the output, starting from the most likely. This scheme is |
| -# not robust to junk in `.', hence go to wildcards (a.*) only as a last |
| -# resort. |
| - |
| -# Be careful to initialize this variable, since it used to be cached. |
| -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. |
| -ac_cv_exeext= |
| -# b.out is created by i960 compilers. |
| -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out |
| + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. |
| +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' |
| +# in a Makefile. We should not override ac_cv_exeext if it was cached, |
| +# so that the user can short-circuit this test for compilers unknown to |
| +# Autoconf. |
| +for ac_file in $ac_files '' |
| do |
| test -f "$ac_file" || continue |
| case $ac_file in |
| - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) |
| - ;; |
| - conftest.$ac_ext ) |
| - # This is the source file. |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) |
| ;; |
| [ab].out ) |
| # We found the default executable, but exeext='' is most |
| # certainly right. |
| break;; |
| *.* ) |
| - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
| - # FIXME: I believe we export ac_cv_exeext for Libtool, |
| - # but it would be cool to find out if it's true. Does anybody |
| - # maintain Libtool? --akim. |
| - export ac_cv_exeext |
| + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; |
| + then :; else |
| + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
| + fi |
| + # We set ac_cv_exeext here because the later test for it is not |
| + # safe: cross compilers may not add the suffix if given an `-o' |
| + # argument, so we may need to know it at that point already. |
| + # Even if this section looks crufty: it has the advantage of |
| + # actually working. |
| break;; |
| * ) |
| break;; |
| esac |
| done |
| +test "$ac_cv_exeext" = no && ac_cv_exeext= |
| + |
| else |
| + ac_file='' |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: result: $ac_file" >&5 |
| +echo "${ECHO_T}$ac_file" >&6; } |
| +if test -z "$ac_file"; then |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| @@ -3853,19 +4639,21 @@ |
| fi |
| |
| ac_exeext=$ac_cv_exeext |
| -echo "$as_me:$LINENO: result: $ac_file" >&5 |
| -echo "${ECHO_T}$ac_file" >&6 |
| |
| -# Check the compiler produces executables we can run. If not, either |
| +# Check that the compiler produces executables we can run. If not, either |
| # the compiler is broken, or we cross compile. |
| -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 |
| -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 |
| +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } |
| # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 |
| # If not cross compiling, check that we can run a simple program. |
| if test "$cross_compiling" != yes; then |
| if { ac_try='./$ac_file' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + { (case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_try") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; }; then |
| @@ -3884,22 +4672,27 @@ |
| fi |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| +{ echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| |
| rm -f a.out a.exe conftest$ac_cv_exeext b.out |
| ac_clean_files=$ac_clean_files_save |
| -# Check the compiler produces executables we can run. If not, either |
| +# Check that the compiler produces executables we can run. If not, either |
| # the compiler is broken, or we cross compile. |
| -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 |
| -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 |
| -echo "$as_me:$LINENO: result: $cross_compiling" >&5 |
| -echo "${ECHO_T}$cross_compiling" >&6 |
| - |
| -echo "$as_me:$LINENO: checking for suffix of executables" >&5 |
| -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>&5 |
| +{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 |
| +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } |
| +{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 |
| +echo "${ECHO_T}$cross_compiling" >&6; } |
| + |
| +{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 |
| +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; then |
| @@ -3910,9 +4703,8 @@ |
| for ac_file in conftest.exe conftest conftest.*; do |
| test -f "$ac_file" || continue |
| case $ac_file in |
| - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; |
| *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
| - export ac_cv_exeext |
| break;; |
| * ) break;; |
| esac |
| @@ -3926,14 +4718,14 @@ |
| fi |
| |
| rm -f conftest$ac_cv_exeext |
| -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 |
| -echo "${ECHO_T}$ac_cv_exeext" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 |
| +echo "${ECHO_T}$ac_cv_exeext" >&6; } |
| |
| rm -f conftest.$ac_ext |
| EXEEXT=$ac_cv_exeext |
| ac_exeext=$EXEEXT |
| -echo "$as_me:$LINENO: checking for suffix of object files" >&5 |
| -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 |
| +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } |
| if test "${ac_cv_objext+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3953,14 +4745,20 @@ |
| } |
| _ACEOF |
| rm -f conftest.o conftest.obj |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>&5 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; then |
| - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do |
| + for ac_file in conftest.o conftest.obj conftest.*; do |
| + test -f "$ac_file" || continue; |
| case $ac_file in |
| - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; |
| *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` |
| break;; |
| esac |
| @@ -3978,12 +4776,12 @@ |
| |
| rm -f conftest.$ac_cv_objext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 |
| -echo "${ECHO_T}$ac_cv_objext" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 |
| +echo "${ECHO_T}$ac_cv_objext" >&6; } |
| OBJEXT=$ac_cv_objext |
| ac_objext=$OBJEXT |
| -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 |
| -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 |
| +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } |
| if test "${ac_cv_c_compiler_gnu+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4006,50 +4804,49 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_compiler_gnu=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_compiler_gnu=no |
| + ac_compiler_gnu=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| ac_cv_c_compiler_gnu=$ac_compiler_gnu |
| |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } |
| GCC=`test $ac_compiler_gnu = yes && echo yes` |
| ac_test_CFLAGS=${CFLAGS+set} |
| ac_save_CFLAGS=$CFLAGS |
| -CFLAGS="-g" |
| -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_cc_g+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - cat >conftest.$ac_ext <<_ACEOF |
| + ac_save_c_werror_flag=$ac_c_werror_flag |
| + ac_c_werror_flag=yes |
| + ac_cv_prog_cc_g=no |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| _ACEOF |
| cat confdefs.h >>conftest.$ac_ext |
| @@ -4065,38 +4862,118 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + ac_cv_prog_cc_g=yes |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + CFLAGS="" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + : |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_cv_prog_cc_g=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_prog_cc_g=no |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } |
| if test "$ac_test_CFLAGS" = set; then |
| CFLAGS=$ac_save_CFLAGS |
| elif test $ac_cv_prog_cc_g = yes; then |
| @@ -4112,12 +4989,12 @@ |
| CFLAGS= |
| fi |
| fi |
| -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 |
| -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_cc_stdc+set}" = set; then |
| +{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 |
| +echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_cc_c89+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - ac_cv_prog_cc_stdc=no |
| + ac_cv_prog_cc_c89=no |
| ac_save_CC=$CC |
| cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| @@ -4151,12 +5028,17 @@ |
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has |
| function prototypes and stuff, but not '\xHH' hex character constants. |
| These don't provoke an error unfortunately, instead are silently treated |
| - as 'x'. The following induces an error, until -std1 is added to get |
| + as 'x'. The following induces an error, until -std is added to get |
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an |
| array size at least. It's necessary to write '\x00'==0 to get something |
| - that's true only with -std1. */ |
| + that's true only with -std. */ |
| int osf4_cc_array ['\x00' == 0 ? 1 : -1]; |
| |
| +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters |
| + inside strings and character constants. */ |
| +#define FOO(x) 'x' |
| +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; |
| + |
| int test (int i, double x); |
| struct s1 {int (*f) (int a);}; |
| struct s2 {int (*f) (double a);}; |
| @@ -4171,205 +5053,57 @@ |
| return 0; |
| } |
| _ACEOF |
| -# Don't try gcc -ansi; that turns off useful extensions and |
| -# breaks some systems' header files. |
| -# AIX -qlanglvl=ansi |
| -# Ultrix and OSF/1 -std1 |
| -# HP-UX 10.20 and later -Ae |
| -# HP-UX older versions -Aa -D_HPUX_SOURCE |
| -# SVR4 -Xc -D__EXTENSIONS__ |
| -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" |
| +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ |
| + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" |
| do |
| CC="$ac_save_CC $ac_arg" |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - ac_cv_prog_cc_stdc=$ac_arg |
| -break |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + ac_cv_prog_cc_c89=$ac_arg |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext |
| + |
| +rm -f core conftest.err conftest.$ac_objext |
| + test "x$ac_cv_prog_cc_c89" != "xno" && break |
| done |
| -rm -f conftest.$ac_ext conftest.$ac_objext |
| +rm -f conftest.$ac_ext |
| CC=$ac_save_CC |
| |
| fi |
| - |
| -case "x$ac_cv_prog_cc_stdc" in |
| - x|xno) |
| - echo "$as_me:$LINENO: result: none needed" >&5 |
| -echo "${ECHO_T}none needed" >&6 ;; |
| +# AC_CACHE_VAL |
| +case "x$ac_cv_prog_cc_c89" in |
| + x) |
| + { echo "$as_me:$LINENO: result: none needed" >&5 |
| +echo "${ECHO_T}none needed" >&6; } ;; |
| + xno) |
| + { echo "$as_me:$LINENO: result: unsupported" >&5 |
| +echo "${ECHO_T}unsupported" >&6; } ;; |
| *) |
| - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 |
| - CC="$CC $ac_cv_prog_cc_stdc" ;; |
| + CC="$CC $ac_cv_prog_cc_c89" |
| + { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 |
| +echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; |
| esac |
| |
| -# Some people use a C++ compiler to compile C. Since we use `exit', |
| -# in C++ we need to declare it. In case someone uses the same compiler |
| -# for both compiling C and C++ we need to have the C++ compiler decide |
| -# the declaration of exit, since it's the most demanding environment. |
| -cat >conftest.$ac_ext <<_ACEOF |
| -#ifndef __cplusplus |
| - choke me |
| -#endif |
| -_ACEOF |
| -rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| - ac_status=$? |
| - grep -v '^ *+' conftest.er1 >conftest.err |
| - rm -f conftest.er1 |
| - cat conftest.err >&5 |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - for ac_declaration in \ |
| - '' \ |
| - 'extern "C" void std::exit (int) throw (); using std::exit;' \ |
| - 'extern "C" void std::exit (int); using std::exit;' \ |
| - 'extern "C" void exit (int) throw ();' \ |
| - 'extern "C" void exit (int);' \ |
| - 'void exit (int);' |
| -do |
| - cat >conftest.$ac_ext <<_ACEOF |
| -/* confdefs.h. */ |
| -_ACEOF |
| -cat confdefs.h >>conftest.$ac_ext |
| -cat >>conftest.$ac_ext <<_ACEOF |
| -/* end confdefs.h. */ |
| -$ac_declaration |
| -#include <stdlib.h> |
| -int |
| -main () |
| -{ |
| -exit (42); |
| - ; |
| - return 0; |
| -} |
| -_ACEOF |
| -rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| - ac_status=$? |
| - grep -v '^ *+' conftest.er1 >conftest.err |
| - rm -f conftest.er1 |
| - cat conftest.err >&5 |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - : |
| -else |
| - echo "$as_me: failed program was:" >&5 |
| -sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -continue |
| -fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| - cat >conftest.$ac_ext <<_ACEOF |
| -/* confdefs.h. */ |
| -_ACEOF |
| -cat confdefs.h >>conftest.$ac_ext |
| -cat >>conftest.$ac_ext <<_ACEOF |
| -/* end confdefs.h. */ |
| -$ac_declaration |
| -int |
| -main () |
| -{ |
| -exit (42); |
| - ; |
| - return 0; |
| -} |
| -_ACEOF |
| -rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| - ac_status=$? |
| - grep -v '^ *+' conftest.er1 >conftest.err |
| - rm -f conftest.er1 |
| - cat conftest.err >&5 |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - break |
| -else |
| - echo "$as_me: failed program was:" >&5 |
| -sed 's/^/| /' conftest.$ac_ext >&5 |
| - |
| -fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| -done |
| -rm -f conftest* |
| -if test -n "$ac_declaration"; then |
| - echo '#ifdef __cplusplus' >>confdefs.h |
| - echo $ac_declaration >>confdefs.h |
| - echo '#endif' >>confdefs.h |
| -fi |
| - |
| -else |
| - echo "$as_me: failed program was:" >&5 |
| -sed 's/^/| /' conftest.$ac_ext >&5 |
| - |
| -fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| ac_ext=c |
| ac_cpp='$CPP $CPPFLAGS' |
| ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| @@ -4378,8 +5112,8 @@ |
| |
| depcc="$CC" am_compiler_list= |
| |
| -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } |
| if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4461,58 +5195,273 @@ |
| fi |
| done |
| |
| - cd .. |
| - rm -rf conftest.dir |
| -else |
| - am_cv_CC_dependencies_compiler_type=none |
| -fi |
| + cd .. |
| + rm -rf conftest.dir |
| +else |
| + am_cv_CC_dependencies_compiler_type=none |
| +fi |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } |
| +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
| + |
| + |
| + |
| +if |
| + test "x$enable_dependency_tracking" != xno \ |
| + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then |
| + am__fastdepCC_TRUE= |
| + am__fastdepCC_FALSE='#' |
| +else |
| + am__fastdepCC_TRUE='#' |
| + am__fastdepCC_FALSE= |
| +fi |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 |
| +echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_GREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + # Extract the first word of "grep ggrep" to use in msg output |
| +if test -z "$GREP"; then |
| +set dummy grep ggrep; ac_prog_name=$2 |
| +if test "${ac_cv_path_GREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_path_GREP_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_prog in grep ggrep; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue |
| + # Check for GNU ac_path_GREP and select it if it is found. |
| + # Check for GNU $ac_path_GREP |
| +case `"$ac_path_GREP" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo 'GREP' >> "conftest.nl" |
| + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_GREP_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_GREP="$ac_path_GREP" |
| + ac_path_GREP_max=$ac_count |
| + fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| + |
| + $ac_path_GREP_found && break 3 |
| + done |
| +done |
| + |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + |
| +GREP="$ac_cv_path_GREP" |
| +if test -z "$GREP"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +else |
| + ac_cv_path_GREP=$GREP |
| +fi |
| + |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 |
| +echo "${ECHO_T}$ac_cv_path_GREP" >&6; } |
| + GREP="$ac_cv_path_GREP" |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking for egrep" >&5 |
| +echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_EGREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 |
| + then ac_cv_path_EGREP="$GREP -E" |
| + else |
| + # Extract the first word of "egrep" to use in msg output |
| +if test -z "$EGREP"; then |
| +set dummy egrep; ac_prog_name=$2 |
| +if test "${ac_cv_path_EGREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_path_EGREP_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_prog in egrep; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue |
| + # Check for GNU ac_path_EGREP and select it if it is found. |
| + # Check for GNU $ac_path_EGREP |
| +case `"$ac_path_EGREP" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo 'EGREP' >> "conftest.nl" |
| + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_EGREP_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_EGREP="$ac_path_EGREP" |
| + ac_path_EGREP_max=$ac_count |
| + fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| + |
| + $ac_path_EGREP_found && break 3 |
| + done |
| +done |
| + |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + |
| +EGREP="$ac_cv_path_EGREP" |
| +if test -z "$EGREP"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +else |
| + ac_cv_path_EGREP=$EGREP |
| +fi |
| + |
| + |
| + fi |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 |
| +echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } |
| + EGREP="$ac_cv_path_EGREP" |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking for fgrep" >&5 |
| +echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_FGREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 |
| + then ac_cv_path_FGREP="$GREP -F" |
| + else |
| + # Extract the first word of "fgrep" to use in msg output |
| +if test -z "$FGREP"; then |
| +set dummy fgrep; ac_prog_name=$2 |
| +if test "${ac_cv_path_FGREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_path_FGREP_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_prog in fgrep; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue |
| + # Check for GNU ac_path_FGREP and select it if it is found. |
| + # Check for GNU $ac_path_FGREP |
| +case `"$ac_path_FGREP" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo 'FGREP' >> "conftest.nl" |
| + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_FGREP_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_FGREP="$ac_path_FGREP" |
| + ac_path_FGREP_max=$ac_count |
| + fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| |
| -fi |
| -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 |
| -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
| + $ac_path_FGREP_found && break 3 |
| + done |
| +done |
| |
| +done |
| +IFS=$as_save_IFS |
| |
| |
| -if |
| - test "x$enable_dependency_tracking" != xno \ |
| - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then |
| - am__fastdepCC_TRUE= |
| - am__fastdepCC_FALSE='#' |
| -else |
| - am__fastdepCC_TRUE='#' |
| - am__fastdepCC_FALSE= |
| fi |
| |
| +FGREP="$ac_cv_path_FGREP" |
| +if test -z "$FGREP"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| |
| -echo "$as_me:$LINENO: checking for egrep" >&5 |
| -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_egrep+set}" = set; then |
| - echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 |
| - then ac_cv_prog_egrep='grep -E' |
| - else ac_cv_prog_egrep='egrep' |
| - fi |
| + ac_cv_path_FGREP=$FGREP |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 |
| - EGREP=$ac_cv_prog_egrep |
| |
| |
| -echo "$as_me:$LINENO: checking for fgrep" >&5 |
| -echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_fgrep+set}" = set; then |
| - echo $ECHO_N "(cached) $ECHO_C" >&6 |
| -else |
| - if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1 |
| - then ac_cv_prog_fgrep='grep -F' |
| - else ac_cv_prog_fgrep='fgrep' |
| - fi |
| + fi |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_fgrep" >&6 |
| - FGREP=$ac_cv_prog_fgrep |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 |
| +echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } |
| + FGREP="$ac_cv_path_FGREP" |
| |
| |
| test -z "$GREP" && GREP=grep |
| @@ -4535,18 +5484,18 @@ |
| |
| |
| |
| -# Check whether --with-gnu-ld or --without-gnu-ld was given. |
| +# Check whether --with-gnu-ld was given. |
| if test "${with_gnu_ld+set}" = set; then |
| - withval="$with_gnu_ld" |
| - test "$withval" = no || with_gnu_ld=yes |
| + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes |
| else |
| with_gnu_ld=no |
| -fi; |
| +fi |
| + |
| ac_prog=ld |
| if test "$GCC" = yes; then |
| # Check if gcc -print-prog-name=ld gives a path. |
| - echo "$as_me:$LINENO: checking for ld used by $CC" >&5 |
| -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 |
| +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } |
| case $host in |
| *-*-mingw*) |
| # gcc leaves a trailing carriage return which upsets mingw |
| @@ -4575,11 +5524,11 @@ |
| ;; |
| esac |
| elif test "$with_gnu_ld" = yes; then |
| - echo "$as_me:$LINENO: checking for GNU ld" >&5 |
| -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for GNU ld" >&5 |
| +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } |
| else |
| - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 |
| -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 |
| +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } |
| fi |
| if test "${lt_cv_path_LD+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| @@ -4612,17 +5561,17 @@ |
| |
| LD="$lt_cv_path_LD" |
| if test -n "$LD"; then |
| - echo "$as_me:$LINENO: result: $LD" >&5 |
| -echo "${ECHO_T}$LD" >&6 |
| + { echo "$as_me:$LINENO: result: $LD" >&5 |
| +echo "${ECHO_T}$LD" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 |
| echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} |
| { (exit 1); exit 1; }; } |
| -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 |
| -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 |
| +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_gnu_ld+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4636,8 +5585,8 @@ |
| ;; |
| esac |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } |
| with_gnu_ld=$lt_cv_prog_gnu_ld |
| |
| |
| @@ -4648,8 +5597,8 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 |
| -echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 |
| +echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } |
| if test "${lt_cv_path_NM+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4697,8 +5646,8 @@ |
| : ${lt_cv_path_NM=no} |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 |
| -echo "${ECHO_T}$lt_cv_path_NM" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 |
| +echo "${ECHO_T}$lt_cv_path_NM" >&6; } |
| if test "$lt_cv_path_NM" != "no"; then |
| NM="$lt_cv_path_NM" |
| else |
| @@ -4708,8 +5657,8 @@ |
| do |
| # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. |
| set dummy $ac_tool_prefix$ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_DUMPBIN+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4722,25 +5671,27 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| DUMPBIN=$ac_cv_prog_DUMPBIN |
| if test -n "$DUMPBIN"; then |
| - echo "$as_me:$LINENO: result: $DUMPBIN" >&5 |
| -echo "${ECHO_T}$DUMPBIN" >&6 |
| + { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 |
| +echo "${ECHO_T}$DUMPBIN" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$DUMPBIN" && break |
| done |
| fi |
| @@ -4750,8 +5701,8 @@ |
| do |
| # Extract the first word of "$ac_prog", so it can be a program name with args. |
| set dummy $ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4764,30 +5715,45 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN |
| if test -n "$ac_ct_DUMPBIN"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 |
| -echo "${ECHO_T}$ac_ct_DUMPBIN" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 |
| +echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$ac_ct_DUMPBIN" && break |
| done |
| -test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":" |
| |
| - DUMPBIN=$ac_ct_DUMPBIN |
| + if test "x$ac_ct_DUMPBIN" = x; then |
| + DUMPBIN=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + DUMPBIN=$ac_ct_DUMPBIN |
| + fi |
| fi |
| |
| |
| @@ -4802,43 +5768,43 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 |
| -echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 |
| +echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } |
| if test "${lt_cv_nm_interface+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| lt_cv_nm_interface="BSD nm" |
| echo "int some_variable = 0;" > conftest.$ac_ext |
| - (eval echo "\"\$as_me:4812: $ac_compile\"" >&5) |
| + (eval echo "\"\$as_me:5778: $ac_compile\"" >&5) |
| (eval "$ac_compile" 2>conftest.err) |
| cat conftest.err >&5 |
| - (eval echo "\"\$as_me:4815: $NM \\\"conftest.$ac_objext\\\"\"" >&5) |
| + (eval echo "\"\$as_me:5781: $NM \\\"conftest.$ac_objext\\\"\"" >&5) |
| (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) |
| cat conftest.err >&5 |
| - (eval echo "\"\$as_me:4818: output\"" >&5) |
| + (eval echo "\"\$as_me:5784: output\"" >&5) |
| cat conftest.out >&5 |
| if $GREP 'External.*some_variable' conftest.out > /dev/null; then |
| lt_cv_nm_interface="MS dumpbin" |
| fi |
| rm -f conftest* |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 |
| -echo "${ECHO_T}$lt_cv_nm_interface" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 |
| +echo "${ECHO_T}$lt_cv_nm_interface" >&6; } |
| |
| -echo "$as_me:$LINENO: checking whether ln -s works" >&5 |
| -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 |
| +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } |
| LN_S=$as_ln_s |
| if test "$LN_S" = "ln -s"; then |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 |
| -echo "${ECHO_T}no, using $LN_S" >&6 |
| + { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 |
| +echo "${ECHO_T}no, using $LN_S" >&6; } |
| fi |
| |
| # find the maximum length of command line arguments |
| -echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 |
| -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 |
| +echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } |
| if test "${lt_cv_sys_max_cmd_len+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4957,11 +5923,11 @@ |
| fi |
| |
| if test -n $lt_cv_sys_max_cmd_len ; then |
| - echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 |
| -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 |
| + { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 |
| +echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: none" >&5 |
| -echo "${ECHO_T}none" >&6 |
| + { echo "$as_me:$LINENO: result: none" >&5 |
| +echo "${ECHO_T}none" >&6; } |
| fi |
| max_cmd_len=$lt_cv_sys_max_cmd_len |
| |
| @@ -4974,8 +5940,8 @@ |
| : ${MV="mv -f"} |
| : ${RM="rm -f"} |
| |
| -echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 |
| -echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 |
| +echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } |
| # Try some XSI features |
| xsi_shell=no |
| ( _lt_dummy="a/b/c" |
| @@ -4984,18 +5950,18 @@ |
| && eval 'test $(( 1 + 1 )) -eq 2 \ |
| && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ |
| && xsi_shell=yes |
| -echo "$as_me:$LINENO: result: $xsi_shell" >&5 |
| -echo "${ECHO_T}$xsi_shell" >&6 |
| +{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 |
| +echo "${ECHO_T}$xsi_shell" >&6; } |
| |
| |
| -echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 |
| -echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 |
| +echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } |
| lt_shell_append=no |
| ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ |
| >/dev/null 2>&1 \ |
| && lt_shell_append=yes |
| -echo "$as_me:$LINENO: result: $lt_shell_append" >&5 |
| -echo "${ECHO_T}$lt_shell_append" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 |
| +echo "${ECHO_T}$lt_shell_append" >&6; } |
| |
| |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| @@ -5029,15 +5995,15 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 |
| -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 |
| +echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } |
| if test "${lt_cv_ld_reload_flag+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| lt_cv_ld_reload_flag='-r' |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 |
| -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 |
| +echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } |
| reload_flag=$lt_cv_ld_reload_flag |
| case $reload_flag in |
| "" | " "*) ;; |
| @@ -5065,8 +6031,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5079,32 +6045,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OBJDUMP=$ac_cv_prog_OBJDUMP |
| if test -n "$OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| -echo "${ECHO_T}$OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| +echo "${ECHO_T}$OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OBJDUMP"; then |
| ac_ct_OBJDUMP=$OBJDUMP |
| # Extract the first word of "objdump", so it can be a program name with args. |
| set dummy objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5117,27 +6085,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OBJDUMP="objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" |
| fi |
| fi |
| ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP |
| if test -n "$ac_ct_OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OBJDUMP=$ac_ct_OBJDUMP |
| + if test "x$ac_ct_OBJDUMP" = x; then |
| + OBJDUMP="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OBJDUMP=$ac_ct_OBJDUMP |
| + fi |
| else |
| OBJDUMP="$ac_cv_prog_OBJDUMP" |
| fi |
| @@ -5149,8 +6131,8 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 |
| -echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 |
| +echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } |
| if test "${lt_cv_deplibs_check_method+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5345,8 +6327,8 @@ |
| esac |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 |
| -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 |
| +echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } |
| file_magic_cmd=$lt_cv_file_magic_cmd |
| deplibs_check_method=$lt_cv_deplibs_check_method |
| test -z "$deplibs_check_method" && deplibs_check_method=unknown |
| @@ -5365,8 +6347,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5379,32 +6361,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AR="${ac_tool_prefix}ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AR=$ac_cv_prog_AR |
| if test -n "$AR"; then |
| - echo "$as_me:$LINENO: result: $AR" >&5 |
| -echo "${ECHO_T}$AR" >&6 |
| + { echo "$as_me:$LINENO: result: $AR" >&5 |
| +echo "${ECHO_T}$AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AR"; then |
| ac_ct_AR=$AR |
| # Extract the first word of "ar", so it can be a program name with args. |
| set dummy ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5417,27 +6401,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AR="ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" |
| fi |
| fi |
| ac_ct_AR=$ac_cv_prog_ac_ct_AR |
| if test -n "$ac_ct_AR"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| -echo "${ECHO_T}$ac_ct_AR" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| +echo "${ECHO_T}$ac_ct_AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AR=$ac_ct_AR |
| + if test "x$ac_ct_AR" = x; then |
| + AR="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AR=$ac_ct_AR |
| + fi |
| else |
| AR="$ac_cv_prog_AR" |
| fi |
| @@ -5458,8 +6456,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5472,32 +6470,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_STRIP="${ac_tool_prefix}strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| STRIP=$ac_cv_prog_STRIP |
| if test -n "$STRIP"; then |
| - echo "$as_me:$LINENO: result: $STRIP" >&5 |
| -echo "${ECHO_T}$STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $STRIP" >&5 |
| +echo "${ECHO_T}$STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_STRIP"; then |
| ac_ct_STRIP=$STRIP |
| # Extract the first word of "strip", so it can be a program name with args. |
| set dummy strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5510,27 +6510,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_STRIP="strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" |
| fi |
| fi |
| ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP |
| if test -n "$ac_ct_STRIP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| -echo "${ECHO_T}$ac_ct_STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| +echo "${ECHO_T}$ac_ct_STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - STRIP=$ac_ct_STRIP |
| + if test "x$ac_ct_STRIP" = x; then |
| + STRIP=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + STRIP=$ac_ct_STRIP |
| + fi |
| else |
| STRIP="$ac_cv_prog_STRIP" |
| fi |
| @@ -5545,8 +6559,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5559,32 +6573,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| RANLIB=$ac_cv_prog_RANLIB |
| if test -n "$RANLIB"; then |
| - echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| -echo "${ECHO_T}$RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| +echo "${ECHO_T}$RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_RANLIB"; then |
| ac_ct_RANLIB=$RANLIB |
| # Extract the first word of "ranlib", so it can be a program name with args. |
| set dummy ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5597,27 +6613,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_RANLIB="ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" |
| fi |
| fi |
| ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
| if test -n "$ac_ct_RANLIB"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| -echo "${ECHO_T}$ac_ct_RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - RANLIB=$ac_ct_RANLIB |
| + if test "x$ac_ct_RANLIB" = x; then |
| + RANLIB=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + RANLIB=$ac_ct_RANLIB |
| + fi |
| else |
| RANLIB="$ac_cv_prog_RANLIB" |
| fi |
| @@ -5690,8 +6720,8 @@ |
| |
| |
| # Check for command to grab the raw symbol name followed by C symbol from nm. |
| -echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 |
| -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 |
| +echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } |
| if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5910,11 +6940,11 @@ |
| lt_cv_sys_global_symbol_to_cdecl= |
| fi |
| if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then |
| - echo "$as_me:$LINENO: result: failed" >&5 |
| -echo "${ECHO_T}failed" >&6 |
| + { echo "$as_me:$LINENO: result: failed" >&5 |
| +echo "${ECHO_T}failed" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: ok" >&5 |
| -echo "${ECHO_T}ok" >&6 |
| + { echo "$as_me:$LINENO: result: ok" >&5 |
| +echo "${ECHO_T}ok" >&6; } |
| fi |
| |
| |
| @@ -5939,11 +6969,11 @@ |
| |
| |
| |
| -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. |
| +# Check whether --enable-libtool-lock was given. |
| if test "${enable_libtool_lock+set}" = set; then |
| - enableval="$enable_libtool_lock" |
| + enableval=$enable_libtool_lock; |
| +fi |
| |
| -fi; |
| test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes |
| |
| # Some flags need to be propagated to the compiler or linker for good |
| @@ -5970,7 +7000,7 @@ |
| ;; |
| *-*-irix6*) |
| # Find out which ABI we are using. |
| - echo '#line 5973 "configure"' > conftest.$ac_ext |
| + echo '#line 7003 "configure"' > conftest.$ac_ext |
| if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| (eval $ac_compile) 2>&5 |
| ac_status=$? |
| @@ -6062,8 +7092,8 @@ |
| # On SCO OpenServer 5, we need -belf to get full-featured binaries. |
| SAVE_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS -belf" |
| - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 |
| -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 |
| +echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } |
| if test "${lt_cv_cc_needs_belf+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6089,35 +7119,32 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| lt_cv_cc_needs_belf=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -lt_cv_cc_needs_belf=no |
| + lt_cv_cc_needs_belf=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| ac_ext=c |
| ac_cpp='$CPP $CPPFLAGS' |
| @@ -6126,8 +7153,8 @@ |
| ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 |
| -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 |
| +echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } |
| if test x"$lt_cv_cc_needs_belf" != x"yes"; then |
| # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf |
| CFLAGS="$SAVE_CFLAGS" |
| @@ -6166,8 +7193,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_DSYMUTIL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6180,32 +7207,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| DSYMUTIL=$ac_cv_prog_DSYMUTIL |
| if test -n "$DSYMUTIL"; then |
| - echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 |
| -echo "${ECHO_T}$DSYMUTIL" >&6 |
| + { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 |
| +echo "${ECHO_T}$DSYMUTIL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_DSYMUTIL"; then |
| ac_ct_DSYMUTIL=$DSYMUTIL |
| # Extract the first word of "dsymutil", so it can be a program name with args. |
| set dummy dsymutil; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6218,27 +7247,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":" |
| fi |
| fi |
| ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL |
| if test -n "$ac_ct_DSYMUTIL"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 |
| -echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 |
| +echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - DSYMUTIL=$ac_ct_DSYMUTIL |
| + if test "x$ac_ct_DSYMUTIL" = x; then |
| + DSYMUTIL=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + DSYMUTIL=$ac_ct_DSYMUTIL |
| + fi |
| else |
| DSYMUTIL="$ac_cv_prog_DSYMUTIL" |
| fi |
| @@ -6246,8 +7289,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}nmedit; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_NMEDIT+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6260,32 +7303,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| NMEDIT=$ac_cv_prog_NMEDIT |
| if test -n "$NMEDIT"; then |
| - echo "$as_me:$LINENO: result: $NMEDIT" >&5 |
| -echo "${ECHO_T}$NMEDIT" >&6 |
| + { echo "$as_me:$LINENO: result: $NMEDIT" >&5 |
| +echo "${ECHO_T}$NMEDIT" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_NMEDIT"; then |
| ac_ct_NMEDIT=$NMEDIT |
| # Extract the first word of "nmedit", so it can be a program name with args. |
| set dummy nmedit; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6298,27 +7343,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_NMEDIT="nmedit" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":" |
| fi |
| fi |
| ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT |
| if test -n "$ac_ct_NMEDIT"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 |
| -echo "${ECHO_T}$ac_ct_NMEDIT" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 |
| +echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - NMEDIT=$ac_ct_NMEDIT |
| + if test "x$ac_ct_NMEDIT" = x; then |
| + NMEDIT=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + NMEDIT=$ac_ct_NMEDIT |
| + fi |
| else |
| NMEDIT="$ac_cv_prog_NMEDIT" |
| fi |
| @@ -6326,8 +7385,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}lipo; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_LIPO+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6340,32 +7399,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_LIPO="${ac_tool_prefix}lipo" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| LIPO=$ac_cv_prog_LIPO |
| if test -n "$LIPO"; then |
| - echo "$as_me:$LINENO: result: $LIPO" >&5 |
| -echo "${ECHO_T}$LIPO" >&6 |
| + { echo "$as_me:$LINENO: result: $LIPO" >&5 |
| +echo "${ECHO_T}$LIPO" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_LIPO"; then |
| ac_ct_LIPO=$LIPO |
| # Extract the first word of "lipo", so it can be a program name with args. |
| set dummy lipo; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6378,27 +7439,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_LIPO="lipo" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":" |
| fi |
| fi |
| ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO |
| if test -n "$ac_ct_LIPO"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 |
| -echo "${ECHO_T}$ac_ct_LIPO" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 |
| +echo "${ECHO_T}$ac_ct_LIPO" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - LIPO=$ac_ct_LIPO |
| + if test "x$ac_ct_LIPO" = x; then |
| + LIPO=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + LIPO=$ac_ct_LIPO |
| + fi |
| else |
| LIPO="$ac_cv_prog_LIPO" |
| fi |
| @@ -6406,8 +7481,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}otool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6420,32 +7495,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OTOOL="${ac_tool_prefix}otool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OTOOL=$ac_cv_prog_OTOOL |
| if test -n "$OTOOL"; then |
| - echo "$as_me:$LINENO: result: $OTOOL" >&5 |
| -echo "${ECHO_T}$OTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $OTOOL" >&5 |
| +echo "${ECHO_T}$OTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OTOOL"; then |
| ac_ct_OTOOL=$OTOOL |
| # Extract the first word of "otool", so it can be a program name with args. |
| set dummy otool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6458,27 +7535,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OTOOL="otool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":" |
| fi |
| fi |
| ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL |
| if test -n "$ac_ct_OTOOL"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 |
| -echo "${ECHO_T}$ac_ct_OTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 |
| +echo "${ECHO_T}$ac_ct_OTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OTOOL=$ac_ct_OTOOL |
| + if test "x$ac_ct_OTOOL" = x; then |
| + OTOOL=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OTOOL=$ac_ct_OTOOL |
| + fi |
| else |
| OTOOL="$ac_cv_prog_OTOOL" |
| fi |
| @@ -6486,8 +7577,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}otool64; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OTOOL64+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6500,32 +7591,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OTOOL64=$ac_cv_prog_OTOOL64 |
| if test -n "$OTOOL64"; then |
| - echo "$as_me:$LINENO: result: $OTOOL64" >&5 |
| -echo "${ECHO_T}$OTOOL64" >&6 |
| + { echo "$as_me:$LINENO: result: $OTOOL64" >&5 |
| +echo "${ECHO_T}$OTOOL64" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OTOOL64"; then |
| ac_ct_OTOOL64=$OTOOL64 |
| # Extract the first word of "otool64", so it can be a program name with args. |
| set dummy otool64; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6538,27 +7631,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OTOOL64="otool64" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":" |
| fi |
| fi |
| ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 |
| if test -n "$ac_ct_OTOOL64"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 |
| -echo "${ECHO_T}$ac_ct_OTOOL64" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 |
| +echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OTOOL64=$ac_ct_OTOOL64 |
| + if test "x$ac_ct_OTOOL64" = x; then |
| + OTOOL64=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OTOOL64=$ac_ct_OTOOL64 |
| + fi |
| else |
| OTOOL64="$ac_cv_prog_OTOOL64" |
| fi |
| @@ -6589,8 +7696,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 |
| -echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 |
| +echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } |
| if test "${lt_cv_apple_cc_single_mod+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6616,10 +7723,10 @@ |
| rm -f conftest.* |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 |
| -echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6 |
| - echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 |
| -echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 |
| +echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } |
| + { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 |
| +echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } |
| if test "${lt_cv_ld_exported_symbols_list+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6643,41 +7750,38 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| lt_cv_ld_exported_symbols_list=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -lt_cv_ld_exported_symbols_list=no |
| + lt_cv_ld_exported_symbols_list=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LDFLAGS="$save_LDFLAGS" |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 |
| -echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 |
| +echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } |
| case $host_os in |
| rhapsody* | darwin1.[012]) |
| _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; |
| @@ -6718,8 +7822,8 @@ |
| ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 |
| -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 |
| +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } |
| # On Suns, sometimes $CPP names a directory. |
| if test -n "$CPP" && test -d "$CPP"; then |
| CPP= |
| @@ -6753,24 +7857,22 @@ |
| #endif |
| Syntax error |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| : |
| else |
| echo "$as_me: failed program was:" >&5 |
| @@ -6779,9 +7881,10 @@ |
| # Broken: fails on valid input. |
| continue |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| - # OK, works on sane cases. Now check whether non-existent headers |
| + # OK, works on sane cases. Now check whether nonexistent headers |
| # can be detected and how. |
| cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| @@ -6791,24 +7894,22 @@ |
| /* end confdefs.h. */ |
| #include <ac_nonexistent.h> |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| # Broken: success on invalid input. |
| continue |
| else |
| @@ -6819,6 +7920,7 @@ |
| ac_preproc_ok=: |
| break |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| done |
| @@ -6836,8 +7938,8 @@ |
| else |
| ac_cv_prog_CPP=$CPP |
| fi |
| -echo "$as_me:$LINENO: result: $CPP" >&5 |
| -echo "${ECHO_T}$CPP" >&6 |
| +{ echo "$as_me:$LINENO: result: $CPP" >&5 |
| +echo "${ECHO_T}$CPP" >&6; } |
| ac_preproc_ok=false |
| for ac_c_preproc_warn_flag in '' yes |
| do |
| @@ -6860,24 +7962,22 @@ |
| #endif |
| Syntax error |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| : |
| else |
| echo "$as_me: failed program was:" >&5 |
| @@ -6886,9 +7986,10 @@ |
| # Broken: fails on valid input. |
| continue |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| - # OK, works on sane cases. Now check whether non-existent headers |
| + # OK, works on sane cases. Now check whether nonexistent headers |
| # can be detected and how. |
| cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| @@ -6898,24 +7999,22 @@ |
| /* end confdefs.h. */ |
| #include <ac_nonexistent.h> |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| # Broken: success on invalid input. |
| continue |
| else |
| @@ -6926,6 +8025,7 @@ |
| ac_preproc_ok=: |
| break |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| done |
| @@ -6948,8 +8048,8 @@ |
| ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| |
| |
| -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 |
| -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 |
| +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } |
| if test "${ac_cv_header_stdc+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6973,35 +8073,31 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_cv_header_stdc=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_header_stdc=no |
| + ac_cv_header_stdc=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| |
| if test $ac_cv_header_stdc = yes; then |
| # SunOS 4.x string.h does not declare mem*, contrary to ANSI. |
| @@ -7057,6 +8153,7 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| #include <ctype.h> |
| +#include <stdlib.h> |
| #if ((' ' & 0x0FF) == 0x020) |
| # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') |
| # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) |
| @@ -7076,18 +8173,27 @@ |
| for (i = 0; i < 256; i++) |
| if (XOR (islower (i), ISLOWER (i)) |
| || toupper (i) != TOUPPER (i)) |
| - exit(2); |
| - exit (0); |
| + return 2; |
| + return 0; |
| } |
| _ACEOF |
| rm -f conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>&5 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } && { ac_try='./conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + { (case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_try") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; }; then |
| @@ -7100,12 +8206,14 @@ |
| ( exit $ac_status ) |
| ac_cv_header_stdc=no |
| fi |
| -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
| +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
| fi |
| + |
| + |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 |
| -echo "${ECHO_T}$ac_cv_header_stdc" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 |
| +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } |
| if test $ac_cv_header_stdc = yes; then |
| |
| cat >>confdefs.h <<\_ACEOF |
| @@ -7128,9 +8236,9 @@ |
| inttypes.h stdint.h unistd.h |
| do |
| as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` |
| -echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 |
| -if eval "test \"\${$as_ac_Header+set}\" = set"; then |
| +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } |
| +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| cat >conftest.$ac_ext <<_ACEOF |
| @@ -7144,38 +8252,35 @@ |
| #include <$ac_header> |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| eval "$as_ac_Header=yes" |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -eval "$as_ac_Header=no" |
| + eval "$as_ac_Header=no" |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 |
| -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 |
| +ac_res=`eval echo '${'$as_ac_Header'}'` |
| + { echo "$as_me:$LINENO: result: $ac_res" >&5 |
| +echo "${ECHO_T}$ac_res" >&6; } |
| if test `eval echo '${'$as_ac_Header'}'` = yes; then |
| cat >>confdefs.h <<_ACEOF |
| #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 |
| @@ -7190,9 +8295,9 @@ |
| for ac_header in dlfcn.h |
| do |
| as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` |
| -echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 |
| -if eval "test \"\${$as_ac_Header+set}\" = set"; then |
| +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } |
| +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| cat >conftest.$ac_ext <<_ACEOF |
| @@ -7206,38 +8311,35 @@ |
| #include <$ac_header> |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| eval "$as_ac_Header=yes" |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -eval "$as_ac_Header=no" |
| + eval "$as_ac_Header=no" |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 |
| -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 |
| +ac_res=`eval echo '${'$as_ac_Header'}'` |
| + { echo "$as_me:$LINENO: result: $ac_res" >&5 |
| +echo "${ECHO_T}$ac_res" >&6; } |
| if test `eval echo '${'$as_ac_Header'}'` = yes; then |
| cat >>confdefs.h <<_ACEOF |
| #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 |
| @@ -7257,10 +8359,9 @@ |
| |
| |
| |
| - # Check whether --enable-shared or --disable-shared was given. |
| + # Check whether --enable-shared was given. |
| if test "${enable_shared+set}" = set; then |
| - enableval="$enable_shared" |
| - p=${PACKAGE-default} |
| + enableval=$enable_shared; p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_shared=yes ;; |
| no) enable_shared=no ;; |
| @@ -7279,7 +8380,8 @@ |
| esac |
| else |
| enable_shared=yes |
| -fi; |
| +fi |
| + |
| |
| |
| |
| @@ -7288,10 +8390,9 @@ |
| |
| |
| |
| - # Check whether --enable-static or --disable-static was given. |
| + # Check whether --enable-static was given. |
| if test "${enable_static+set}" = set; then |
| - enableval="$enable_static" |
| - p=${PACKAGE-default} |
| + enableval=$enable_static; p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_static=yes ;; |
| no) enable_static=no ;; |
| @@ -7310,7 +8411,8 @@ |
| esac |
| else |
| enable_static=yes |
| -fi; |
| +fi |
| + |
| |
| |
| |
| @@ -7320,13 +8422,13 @@ |
| |
| |
| |
| -# Check whether --with-pic or --without-pic was given. |
| +# Check whether --with-pic was given. |
| if test "${with_pic+set}" = set; then |
| - withval="$with_pic" |
| - pic_mode="$withval" |
| + withval=$with_pic; pic_mode="$withval" |
| else |
| pic_mode=default |
| -fi; |
| +fi |
| + |
| |
| test -z "$pic_mode" && pic_mode=default |
| |
| @@ -7336,10 +8438,9 @@ |
| |
| |
| |
| - # Check whether --enable-fast-install or --disable-fast-install was given. |
| + # Check whether --enable-fast-install was given. |
| if test "${enable_fast_install+set}" = set; then |
| - enableval="$enable_fast_install" |
| - p=${PACKAGE-default} |
| + enableval=$enable_fast_install; p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_fast_install=yes ;; |
| no) enable_fast_install=no ;; |
| @@ -7358,7 +8459,8 @@ |
| esac |
| else |
| enable_fast_install=yes |
| -fi; |
| +fi |
| + |
| |
| |
| |
| @@ -7418,8 +8520,8 @@ |
| setopt NO_GLOB_SUBST |
| fi |
| |
| -echo "$as_me:$LINENO: checking for objdir" >&5 |
| -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for objdir" >&5 |
| +echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } |
| if test "${lt_cv_objdir+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7433,8 +8535,8 @@ |
| fi |
| rmdir .libs 2>/dev/null |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 |
| -echo "${ECHO_T}$lt_cv_objdir" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 |
| +echo "${ECHO_T}$lt_cv_objdir" >&6; } |
| objdir=$lt_cv_objdir |
| |
| |
| @@ -7526,8 +8628,8 @@ |
| case $deplibs_check_method in |
| file_magic*) |
| if test "$file_magic_cmd" = '$MAGIC_CMD'; then |
| - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 |
| -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 |
| +echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } |
| if test "${lt_cv_path_MAGIC_CMD+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7579,11 +8681,11 @@ |
| |
| MAGIC_CMD="$lt_cv_path_MAGIC_CMD" |
| if test -n "$MAGIC_CMD"; then |
| - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| -echo "${ECHO_T}$MAGIC_CMD" >&6 |
| + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| +echo "${ECHO_T}$MAGIC_CMD" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| |
| @@ -7592,8 +8694,8 @@ |
| |
| if test -z "$lt_cv_path_MAGIC_CMD"; then |
| if test -n "$ac_tool_prefix"; then |
| - echo "$as_me:$LINENO: checking for file" >&5 |
| -echo $ECHO_N "checking for file... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for file" >&5 |
| +echo $ECHO_N "checking for file... $ECHO_C" >&6; } |
| if test "${lt_cv_path_MAGIC_CMD+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7645,11 +8747,11 @@ |
| |
| MAGIC_CMD="$lt_cv_path_MAGIC_CMD" |
| if test -n "$MAGIC_CMD"; then |
| - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| -echo "${ECHO_T}$MAGIC_CMD" >&6 |
| + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| +echo "${ECHO_T}$MAGIC_CMD" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| |
| @@ -7729,8 +8831,8 @@ |
| if test "$GCC" = yes; then |
| lt_prog_compiler_no_builtin_flag=' -fno-builtin' |
| |
| - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 |
| -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 |
| +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7747,11 +8849,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:7750: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:8852: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>conftest.err) |
| ac_status=$? |
| cat conftest.err >&5 |
| - echo "$as_me:7754: \$? = $ac_status" >&5 |
| + echo "$as_me:8856: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s "$ac_outfile"; then |
| # The compiler can only warn and ignore the option if not recognized |
| # So say no if there are warnings other than the usual output. |
| @@ -7764,8 +8866,8 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } |
| |
| if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then |
| lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" |
| @@ -7784,8 +8886,8 @@ |
| lt_prog_compiler_pic= |
| lt_prog_compiler_static= |
| |
| -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 |
| -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 |
| +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } |
| |
| if test "$GCC" = yes; then |
| lt_prog_compiler_wl='-Wl,' |
| @@ -8056,8 +9158,8 @@ |
| lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" |
| ;; |
| esac |
| -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 |
| -echo "${ECHO_T}$lt_prog_compiler_pic" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 |
| +echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } |
| |
| |
| |
| @@ -8068,8 +9170,8 @@ |
| # Check to make sure the PIC flag actually works. |
| # |
| if test -n "$lt_prog_compiler_pic"; then |
| - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 |
| -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 |
| +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_pic_works+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8086,11 +9188,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:8089: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:9191: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>conftest.err) |
| ac_status=$? |
| cat conftest.err >&5 |
| - echo "$as_me:8093: \$? = $ac_status" >&5 |
| + echo "$as_me:9195: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s "$ac_outfile"; then |
| # The compiler can only warn and ignore the option if not recognized |
| # So say no if there are warnings other than the usual output. |
| @@ -8103,8 +9205,8 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } |
| |
| if test x"$lt_cv_prog_compiler_pic_works" = xyes; then |
| case $lt_prog_compiler_pic in |
| @@ -8127,8 +9229,8 @@ |
| # Check to make sure the static flag actually works. |
| # |
| wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" |
| -echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 |
| -echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 |
| +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_static_works+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8155,8 +9257,8 @@ |
| LDFLAGS="$save_LDFLAGS" |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } |
| |
| if test x"$lt_cv_prog_compiler_static_works" = xyes; then |
| : |
| @@ -8170,8 +9272,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_c_o+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8191,11 +9293,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:8194: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:9296: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>out/conftest.err) |
| ac_status=$? |
| cat out/conftest.err >&5 |
| - echo "$as_me:8198: \$? = $ac_status" >&5 |
| + echo "$as_me:9300: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s out/conftest2.$ac_objext |
| then |
| # The compiler can only warn and ignore the option if not recognized |
| @@ -8217,16 +9319,16 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } |
| |
| |
| |
| |
| |
| |
| - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_c_o+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8246,11 +9348,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:8249: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:9351: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>out/conftest.err) |
| ac_status=$? |
| cat out/conftest.err >&5 |
| - echo "$as_me:8253: \$? = $ac_status" >&5 |
| + echo "$as_me:9355: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s out/conftest2.$ac_objext |
| then |
| # The compiler can only warn and ignore the option if not recognized |
| @@ -8272,8 +9374,8 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } |
| |
| |
| |
| @@ -8281,16 +9383,16 @@ |
| hard_links="nottested" |
| if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then |
| # do not overwrite the value of need_locks provided by the user |
| - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 |
| -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 |
| +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } |
| hard_links=yes |
| $RM conftest* |
| ln conftest.a conftest.b 2>/dev/null && hard_links=no |
| touch conftest.a |
| ln conftest.a conftest.b 2>&5 || hard_links=no |
| ln conftest.a conftest.b 2>/dev/null && hard_links=no |
| - echo "$as_me:$LINENO: result: $hard_links" >&5 |
| -echo "${ECHO_T}$hard_links" >&6 |
| + { echo "$as_me:$LINENO: result: $hard_links" >&5 |
| +echo "${ECHO_T}$hard_links" >&6; } |
| if test "$hard_links" = no; then |
| { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 |
| echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} |
| @@ -8305,8 +9407,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 |
| -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 |
| +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } |
| |
| runpath_var= |
| allow_undefined_flag= |
| @@ -8763,27 +9865,23 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| |
| lt_aix_libpath_sed=' |
| /Import File Strings/,/^$/ { |
| @@ -8801,8 +9899,10 @@ |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi |
| |
| @@ -8832,27 +9932,23 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| |
| lt_aix_libpath_sed=' |
| /Import File Strings/,/^$/ { |
| @@ -8870,8 +9966,10 @@ |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi |
| |
| @@ -9088,35 +10186,33 @@ |
| int foo(void) {} |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' |
| |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LDFLAGS="$save_LDFLAGS" |
| else |
| @@ -9373,8 +10469,8 @@ |
| fi |
| fi |
| |
| -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 |
| -echo "${ECHO_T}$ld_shlibs" >&6 |
| +{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 |
| +echo "${ECHO_T}$ld_shlibs" >&6; } |
| test "$ld_shlibs" = no && can_build_shared=no |
| |
| with_gnu_ld=$with_gnu_ld |
| @@ -9410,46 +10506,52 @@ |
| # Test whether the compiler implicitly links with -lc since on some |
| # systems, -lgcc has to come before -lc. If gcc already passes -lc |
| # to ld, don't add -lc before -lgcc. |
| - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 |
| -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 |
| - $RM conftest* |
| - echo "$lt_simple_compile_test_code" > conftest.$ac_ext |
| + { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 |
| +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } |
| +if test "${lt_cv_archive_cmds_need_lc+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + $RM conftest* |
| + echo "$lt_simple_compile_test_code" > conftest.$ac_ext |
| |
| - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| (eval $ac_compile) 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } 2>conftest.err; then |
| - soname=conftest |
| - lib=conftest |
| - libobjs=conftest.$ac_objext |
| - deplibs= |
| - wl=$lt_prog_compiler_wl |
| - pic_flag=$lt_prog_compiler_pic |
| - compiler_flags=-v |
| - linker_flags=-v |
| - verstring= |
| - output_objdir=. |
| - libname=conftest |
| - lt_save_allow_undefined_flag=$allow_undefined_flag |
| - allow_undefined_flag= |
| - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 |
| + soname=conftest |
| + lib=conftest |
| + libobjs=conftest.$ac_objext |
| + deplibs= |
| + wl=$lt_prog_compiler_wl |
| + pic_flag=$lt_prog_compiler_pic |
| + compiler_flags=-v |
| + linker_flags=-v |
| + verstring= |
| + output_objdir=. |
| + libname=conftest |
| + lt_save_allow_undefined_flag=$allow_undefined_flag |
| + allow_undefined_flag= |
| + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 |
| (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| - then |
| - archive_cmds_need_lc=no |
| - else |
| - archive_cmds_need_lc=yes |
| - fi |
| - allow_undefined_flag=$lt_save_allow_undefined_flag |
| - else |
| - cat conftest.err 1>&5 |
| - fi |
| - $RM conftest* |
| - echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 |
| -echo "${ECHO_T}$archive_cmds_need_lc" >&6 |
| + then |
| + lt_cv_archive_cmds_need_lc=no |
| + else |
| + lt_cv_archive_cmds_need_lc=yes |
| + fi |
| + allow_undefined_flag=$lt_save_allow_undefined_flag |
| + else |
| + cat conftest.err 1>&5 |
| + fi |
| + $RM conftest* |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 |
| +echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; } |
| + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc |
| ;; |
| esac |
| fi |
| @@ -9612,8 +10714,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 |
| -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 |
| +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } |
| |
| if test "$GCC" = yes; then |
| case $host_os in |
| @@ -10029,12 +11131,17 @@ |
| finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=no |
| + |
| # Some binutils ld are patched to set DT_RUNPATH |
| - save_LDFLAGS=$LDFLAGS |
| - save_libdir=$libdir |
| - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ |
| - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" |
| - cat >conftest.$ac_ext <<_ACEOF |
| + if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + lt_cv_shlibpath_overrides_runpath=no |
| + save_LDFLAGS=$LDFLAGS |
| + save_libdir=$libdir |
| + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ |
| + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" |
| + cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| _ACEOF |
| cat confdefs.h >>conftest.$ac_ext |
| @@ -10050,40 +11157,42 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| - ac_status=$? |
| - grep -v '^ *+' conftest.er1 >conftest.err |
| - rm -f conftest.er1 |
| - cat conftest.err >&5 |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then |
| - shlibpath_overrides_runpath=yes |
| + lt_cv_shlibpath_overrides_runpath=yes |
| fi |
| |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| - LDFLAGS=$save_LDFLAGS |
| - libdir=$save_libdir |
| + LDFLAGS=$save_LDFLAGS |
| + libdir=$save_libdir |
| + |
| +fi |
| + |
| + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath |
| |
| # This implies no fast_install, which is unacceptable. |
| # Some rework will be needed to allow for fast_install |
| @@ -10293,8 +11402,8 @@ |
| dynamic_linker=no |
| ;; |
| esac |
| -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 |
| -echo "${ECHO_T}$dynamic_linker" >&6 |
| +{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 |
| +echo "${ECHO_T}$dynamic_linker" >&6; } |
| test "$dynamic_linker" = no && can_build_shared=no |
| |
| variables_saved_for_relink="PATH $shlibpath_var $runpath_var" |
| @@ -10395,8 +11504,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 |
| -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 |
| +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } |
| hardcode_action= |
| if test -n "$hardcode_libdir_flag_spec" || |
| test -n "$runpath_var" || |
| @@ -10420,8 +11529,8 @@ |
| # directories. |
| hardcode_action=unsupported |
| fi |
| -echo "$as_me:$LINENO: result: $hardcode_action" >&5 |
| -echo "${ECHO_T}$hardcode_action" >&6 |
| +{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 |
| +echo "${ECHO_T}$hardcode_action" >&6; } |
| |
| if test "$hardcode_action" = relink || |
| test "$inherit_rpath" = yes; then |
| @@ -10465,8 +11574,8 @@ |
| |
| darwin*) |
| # if libdl is installed we need to link against it |
| - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dl_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10479,56 +11588,53 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| int |
| main () |
| { |
| -dlopen (); |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dl_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dl_dlopen=no |
| + ac_cv_lib_dl_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } |
| if test $ac_cv_lib_dl_dlopen = yes; then |
| lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" |
| else |
| @@ -10542,8 +11648,8 @@ |
| ;; |
| |
| *) |
| - echo "$as_me:$LINENO: checking for shl_load" >&5 |
| -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for shl_load" >&5 |
| +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } |
| if test "${ac_cv_func_shl_load+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10570,73 +11676,64 @@ |
| |
| #undef shl_load |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| -{ |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char shl_load (); |
| /* The GNU C library defines this for functions which it implements |
| to always fail with ENOSYS. Some functions are actually named |
| something starting with __ and the normal name is an alias. */ |
| -#if defined (__stub_shl_load) || defined (__stub___shl_load) |
| +#if defined __stub_shl_load || defined __stub___shl_load |
| choke me |
| -#else |
| -char (*f) () = shl_load; |
| -#endif |
| -#ifdef __cplusplus |
| -} |
| #endif |
| |
| int |
| main () |
| { |
| -return f != shl_load; |
| +return shl_load (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_func_shl_load=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_func_shl_load=no |
| + ac_cv_func_shl_load=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 |
| -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 |
| +echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } |
| if test $ac_cv_func_shl_load = yes; then |
| lt_cv_dlopen="shl_load" |
| else |
| - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 |
| -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 |
| +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dld_shl_load+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10649,61 +11746,58 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char shl_load (); |
| int |
| main () |
| { |
| -shl_load (); |
| +return shl_load (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dld_shl_load=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dld_shl_load=no |
| + ac_cv_lib_dld_shl_load=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } |
| if test $ac_cv_lib_dld_shl_load = yes; then |
| lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" |
| else |
| - echo "$as_me:$LINENO: checking for dlopen" >&5 |
| -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen" >&5 |
| +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } |
| if test "${ac_cv_func_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10730,73 +11824,64 @@ |
| |
| #undef dlopen |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| -{ |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| /* The GNU C library defines this for functions which it implements |
| to always fail with ENOSYS. Some functions are actually named |
| something starting with __ and the normal name is an alias. */ |
| -#if defined (__stub_dlopen) || defined (__stub___dlopen) |
| +#if defined __stub_dlopen || defined __stub___dlopen |
| choke me |
| -#else |
| -char (*f) () = dlopen; |
| -#endif |
| -#ifdef __cplusplus |
| -} |
| #endif |
| |
| int |
| main () |
| { |
| -return f != dlopen; |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_func_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_func_dlopen=no |
| + ac_cv_func_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } |
| if test $ac_cv_func_dlopen = yes; then |
| lt_cv_dlopen="dlopen" |
| else |
| - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dl_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10809,61 +11894,58 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| int |
| main () |
| { |
| -dlopen (); |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dl_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dl_dlopen=no |
| + ac_cv_lib_dl_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } |
| if test $ac_cv_lib_dl_dlopen = yes; then |
| lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" |
| else |
| - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 |
| -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 |
| +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_svld_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10876,61 +11958,58 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| int |
| main () |
| { |
| -dlopen (); |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_svld_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_svld_dlopen=no |
| + ac_cv_lib_svld_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } |
| if test $ac_cv_lib_svld_dlopen = yes; then |
| lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" |
| else |
| - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 |
| -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 |
| +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dld_dld_link+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10943,56 +12022,53 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dld_link (); |
| int |
| main () |
| { |
| -dld_link (); |
| +return dld_link (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dld_dld_link=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dld_dld_link=no |
| + ac_cv_lib_dld_dld_link=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } |
| if test $ac_cv_lib_dld_dld_link = yes; then |
| lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" |
| fi |
| @@ -11032,8 +12108,8 @@ |
| save_LIBS="$LIBS" |
| LIBS="$lt_cv_dlopen_libs $LIBS" |
| |
| - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 |
| -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 |
| +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } |
| if test "${lt_cv_dlopen_self+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -11043,7 +12119,7 @@ |
| lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 |
| lt_status=$lt_dlunknown |
| cat > conftest.$ac_ext <<_LT_EOF |
| -#line 11046 "configure" |
| +#line 12122 "configure" |
| #include "confdefs.h" |
| |
| #if HAVE_DLFCN_H |
| @@ -11123,13 +12199,13 @@ |
| |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 |
| -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 |
| +echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } |
| |
| if test "x$lt_cv_dlopen_self" = xyes; then |
| wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" |
| - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 |
| -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 |
| +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } |
| if test "${lt_cv_dlopen_self_static+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -11139,7 +12215,7 @@ |
| lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 |
| lt_status=$lt_dlunknown |
| cat > conftest.$ac_ext <<_LT_EOF |
| -#line 11142 "configure" |
| +#line 12218 "configure" |
| #include "confdefs.h" |
| |
| #if HAVE_DLFCN_H |
| @@ -11219,8 +12295,8 @@ |
| |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 |
| -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 |
| +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } |
| fi |
| |
| CPPFLAGS="$save_CPPFLAGS" |
| @@ -11258,13 +12334,13 @@ |
| |
| striplib= |
| old_striplib= |
| -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 |
| -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 |
| +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } |
| if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then |
| test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" |
| test -z "$striplib" && striplib="$STRIP --strip-unneeded" |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| else |
| # FIXME - insert some real tests, host_os isn't really good enough |
| case $host_os in |
| @@ -11272,16 +12348,16 @@ |
| if test -n "$STRIP" ; then |
| striplib="$STRIP -x" |
| old_striplib="$STRIP -S" |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| ;; |
| *) |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| ;; |
| esac |
| fi |
| @@ -11298,13 +12374,13 @@ |
| |
| |
| # Report which library types will actually be built |
| - echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 |
| -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 |
| - echo "$as_me:$LINENO: result: $can_build_shared" >&5 |
| -echo "${ECHO_T}$can_build_shared" >&6 |
| + { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 |
| +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } |
| + { echo "$as_me:$LINENO: result: $can_build_shared" >&5 |
| +echo "${ECHO_T}$can_build_shared" >&6; } |
| |
| - echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 |
| -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 |
| +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } |
| test "$can_build_shared" = "no" && enable_shared=no |
| |
| # On AIX, shared libraries and static libraries use the same namespace, and |
| @@ -11324,15 +12400,15 @@ |
| fi |
| ;; |
| esac |
| - echo "$as_me:$LINENO: result: $enable_shared" >&5 |
| -echo "${ECHO_T}$enable_shared" >&6 |
| + { echo "$as_me:$LINENO: result: $enable_shared" >&5 |
| +echo "${ECHO_T}$enable_shared" >&6; } |
| |
| - echo "$as_me:$LINENO: checking whether to build static libraries" >&5 |
| -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 |
| +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } |
| # Make sure either enable_shared or enable_static is yes. |
| test "$enable_shared" = yes || enable_static=yes |
| - echo "$as_me:$LINENO: result: $enable_static" >&5 |
| -echo "${ECHO_T}$enable_static" >&6 |
| + { echo "$as_me:$LINENO: result: $enable_static" >&5 |
| +echo "${ECHO_T}$enable_static" >&6; } |
| |
| |
| |
| @@ -11358,7 +12434,7 @@ |
| |
| |
| |
| - ac_config_commands="$ac_config_commands libtool" |
| + ac_config_commands="$ac_config_commands libtool" |
| |
| |
| |
| @@ -11370,161 +12446,85 @@ |
| |
| if test -n "${machine_dir}"; then |
| case ${machine_dir} in |
| - a29k) |
| - |
| -subdirs="$subdirs a29k" |
| + a29k) subdirs="$subdirs a29k" |
| ;; |
| - arm) |
| - |
| -subdirs="$subdirs arm" |
| + arm) subdirs="$subdirs arm" |
| ;; |
| - bfin) |
| - |
| -subdirs="$subdirs bfin" |
| + avr32) subdirs="$subdirs avr32" |
| ;; |
| - cris) |
| - |
| -subdirs="$subdirs cris" |
| + bfin) subdirs="$subdirs bfin" |
| ;; |
| - crx) |
| - |
| -subdirs="$subdirs crx" |
| + cris) subdirs="$subdirs cris" |
| ;; |
| - d10v) |
| - |
| -subdirs="$subdirs d10v" |
| + crx) subdirs="$subdirs crx" |
| ;; |
| - d30v) |
| - |
| -subdirs="$subdirs d30v" |
| + d10v) subdirs="$subdirs d10v" |
| ;; |
| - fr30) |
| - |
| -subdirs="$subdirs fr30" |
| + d30v) subdirs="$subdirs d30v" |
| ;; |
| - frv) |
| - |
| -subdirs="$subdirs frv" |
| + fr30) subdirs="$subdirs fr30" |
| ;; |
| - h8300) |
| - |
| -subdirs="$subdirs h8300" |
| + frv) subdirs="$subdirs frv" |
| ;; |
| - h8500) |
| - |
| -subdirs="$subdirs h8500" |
| + h8300) subdirs="$subdirs h8300" |
| ;; |
| - hppa) |
| - |
| -subdirs="$subdirs hppa" |
| + h8500) subdirs="$subdirs h8500" |
| ;; |
| - i386) |
| - |
| -subdirs="$subdirs i386" |
| + hppa) subdirs="$subdirs hppa" |
| ;; |
| - i960) |
| - |
| -subdirs="$subdirs i960" |
| + i386) subdirs="$subdirs i386" |
| ;; |
| - iq2000) |
| - |
| -subdirs="$subdirs iq2000" |
| + i960) subdirs="$subdirs i960" |
| ;; |
| - lm32) |
| - |
| -subdirs="$subdirs lm32" |
| + iq2000) subdirs="$subdirs iq2000" |
| ;; |
| - m32c) |
| - |
| -subdirs="$subdirs m32c" |
| + lm32) subdirs="$subdirs lm32" |
| ;; |
| - m32r) |
| - |
| -subdirs="$subdirs m32r" |
| + m32c) subdirs="$subdirs m32c" |
| ;; |
| - m68hc11) |
| - |
| -subdirs="$subdirs m68hc11" |
| + m32r) subdirs="$subdirs m32r" |
| ;; |
| - m68k) |
| - |
| -subdirs="$subdirs m68k" |
| + m68hc11) subdirs="$subdirs m68hc11" |
| ;; |
| - m88k) |
| - |
| -subdirs="$subdirs m88k" |
| + m68k) subdirs="$subdirs m68k" |
| ;; |
| - mep ) |
| - |
| -subdirs="$subdirs mep" |
| + m88k) subdirs="$subdirs m88k" |
| ;; |
| - mips) |
| - |
| -subdirs="$subdirs mips" |
| + mep ) subdirs="$subdirs mep" |
| ;; |
| - mn10200) |
| - |
| -subdirs="$subdirs mn10200" |
| + mips) subdirs="$subdirs mips" |
| ;; |
| - mn10300) |
| - |
| -subdirs="$subdirs mn10300" |
| + mn10200) subdirs="$subdirs mn10200" |
| ;; |
| - mt) |
| - |
| -subdirs="$subdirs mt" |
| + mn10300) subdirs="$subdirs mn10300" |
| ;; |
| - necv70) |
| - |
| -subdirs="$subdirs necv70" |
| + mt) subdirs="$subdirs mt" |
| ;; |
| - powerpc) |
| - |
| -subdirs="$subdirs powerpc" |
| + necv70) subdirs="$subdirs necv70" |
| ;; |
| - sh) |
| - |
| -subdirs="$subdirs sh" |
| + powerpc) subdirs="$subdirs powerpc" |
| ;; |
| - sparc) |
| - |
| -subdirs="$subdirs sparc" |
| + sh) subdirs="$subdirs sh" |
| ;; |
| - spu) |
| - |
| -subdirs="$subdirs spu" |
| + sparc) subdirs="$subdirs sparc" |
| ;; |
| - tic4x) |
| - |
| -subdirs="$subdirs tic4x" |
| + spu) subdirs="$subdirs spu" |
| ;; |
| - tic80) |
| - |
| -subdirs="$subdirs tic80" |
| + tic4x) subdirs="$subdirs tic4x" |
| ;; |
| - v850) |
| - |
| -subdirs="$subdirs v850" |
| + tic80) subdirs="$subdirs tic80" |
| ;; |
| - w65) |
| - |
| -subdirs="$subdirs w65" |
| + v850) subdirs="$subdirs v850" |
| ;; |
| - x86_64) |
| - |
| -subdirs="$subdirs x86_64" |
| + w65) subdirs="$subdirs w65" |
| ;; |
| - xscale) |
| - |
| -subdirs="$subdirs xscale" |
| + x86_64) subdirs="$subdirs x86_64" |
| ;; |
| - xstormy16) |
| - |
| -subdirs="$subdirs xstormy16" |
| + xscale) subdirs="$subdirs xscale" |
| ;; |
| - z8k) |
| - |
| -subdirs="$subdirs z8k" |
| + xstormy16) subdirs="$subdirs xstormy16" |
| + ;; |
| + z8k) subdirs="$subdirs z8k" |
| ;; |
| esac; |
| fi |
| @@ -11540,7 +12540,7 @@ |
| fi |
| |
| |
| - ac_config_files="$ac_config_files Makefile" |
| +ac_config_files="$ac_config_files Makefile" |
| |
| cat >confcache <<\_ACEOF |
| # This file is a shell script that caches the results of configure |
| @@ -11560,39 +12560,58 @@ |
| |
| # The following way of writing the cache mishandles newlines in values, |
| # but we know of no workaround that is simple, portable, and efficient. |
| -# So, don't put newlines in cache variables' values. |
| +# So, we kill variables containing newlines. |
| # Ultrix sh set writes to stderr and can't be redirected directly, |
| # and sets the high bit in the cache file unless we assign to the vars. |
| -{ |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| + |
| (set) 2>&1 | |
| - case `(ac_space=' '; set | grep ac_space) 2>&1` in |
| - *ac_space=\ *) |
| + case $as_nl`(ac_space=' '; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| # `set' does not quote correctly, so add quotes (double-quote |
| # substitution turns \\\\ into \\, and sed turns \\ into \). |
| sed -n \ |
| "s/'/'\\\\''/g; |
| s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" |
| - ;; |
| + ;; #( |
| *) |
| # `set' quotes correctly as required by POSIX, so do not add quotes. |
| - sed -n \ |
| - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| ;; |
| - esac; |
| -} | |
| + esac | |
| + sort |
| +) | |
| sed ' |
| + /^ac_cv_env_/b end |
| t clear |
| - : clear |
| + :clear |
| s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ |
| t end |
| - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
| - : end' >>confcache |
| -if diff $cache_file confcache >/dev/null 2>&1; then :; else |
| - if test -w $cache_file; then |
| - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" |
| + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
| + :end' >>confcache |
| +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else |
| + if test -w "$cache_file"; then |
| + test "x$cache_file" != "x/dev/null" && |
| + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 |
| +echo "$as_me: updating cache $cache_file" >&6;} |
| cat confcache >$cache_file |
| else |
| - echo "not updating unwritable cache $cache_file" |
| + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 |
| +echo "$as_me: not updating unwritable cache $cache_file" >&6;} |
| fi |
| fi |
| rm -f confcache |
| @@ -11601,63 +12620,48 @@ |
| # Let make expand exec_prefix. |
| test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
| |
| -# VPATH may cause trouble with some makes, so we remove $(srcdir), |
| -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
| -# trailing colons and then remove the whole line if VPATH becomes empty |
| -# (actually we leave an empty line to preserve line numbers). |
| -if test "x$srcdir" = x.; then |
| - ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
| -s/:*\$(srcdir):*/:/; |
| -s/:*\${srcdir}:*/:/; |
| -s/:*@srcdir@:*/:/; |
| -s/^\([^=]*=[ ]*\):*/\1/; |
| -s/:*$//; |
| -s/^[^=]*=[ ]*$//; |
| -}' |
| -fi |
| - |
| # Transform confdefs.h into DEFS. |
| # Protect against shell expansion while executing Makefile rules. |
| # Protect against Makefile macro expansion. |
| # |
| # If the first sed substitution is executed (which looks for macros that |
| -# take arguments), then we branch to the quote section. Otherwise, |
| +# take arguments), then branch to the quote section. Otherwise, |
| # look for a macro that doesn't take arguments. |
| -cat >confdef2opt.sed <<\_ACEOF |
| +ac_script=' |
| t clear |
| -: clear |
| -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g |
| +:clear |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g |
| t quote |
| -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g |
| t quote |
| -d |
| -: quote |
| -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g |
| -s,\[,\\&,g |
| -s,\],\\&,g |
| -s,\$,$$,g |
| -p |
| -_ACEOF |
| -# We use echo to avoid assuming a particular line-breaking character. |
| -# The extra dot is to prevent the shell from consuming trailing |
| -# line-breaks from the sub-command output. A line-break within |
| -# single-quotes doesn't work because, if this script is created in a |
| -# platform that uses two characters for line-breaks (e.g., DOS), tr |
| -# would break. |
| -ac_LF_and_DOT=`echo; echo .` |
| -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` |
| -rm -f confdef2opt.sed |
| +b any |
| +:quote |
| +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g |
| +s/\[/\\&/g |
| +s/\]/\\&/g |
| +s/\$/$$/g |
| +H |
| +:any |
| +${ |
| + g |
| + s/^\n// |
| + s/\n/ /g |
| + p |
| +} |
| +' |
| +DEFS=`sed -n "$ac_script" confdefs.h` |
| |
| |
| ac_libobjs= |
| ac_ltlibobjs= |
| for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue |
| # 1. Remove the extension, and $U if already installed. |
| - ac_i=`echo "$ac_i" | |
| - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` |
| - # 2. Add them. |
| - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" |
| - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' |
| + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' |
| + ac_i=`echo "$ac_i" | sed "$ac_script"` |
| + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR |
| + # will be set to the directory where LIBOBJS objects are built. |
| + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" |
| + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' |
| done |
| LIBOBJS=$ac_libobjs |
| |
| @@ -11772,17 +12776,45 @@ |
| ## M4sh Initialization. ## |
| ## --------------------- ## |
| |
| -# Be Bourne compatible |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then |
| - set -o posix |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| fi |
| -DUALCASE=1; export DUALCASE # for MKS sh |
| |
| # Support unset when possible. |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| @@ -11792,8 +12824,43 @@ |
| fi |
| |
| |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| # Work around bugs in pre-3.0 UWIN ksh. |
| -$as_unset ENV MAIL MAILPATH |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| PS1='$ ' |
| PS2='> ' |
| PS4='+ ' |
| @@ -11807,18 +12874,19 @@ |
| if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| eval $as_var=C; export $as_var |
| else |
| - $as_unset $as_var |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| fi |
| done |
| |
| # Required to use basename. |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| as_basename=basename |
| else |
| as_basename=false |
| @@ -11826,159 +12894,120 @@ |
| |
| |
| # Name of the executable. |
| -as_me=`$as_basename "$0" || |
| +as_me=`$as_basename -- "$0" || |
| $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| - X"$0" : 'X\(/\)$' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X/"$0" | |
| - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } |
| - /^X\/\(\/\/\)$/{ s//\1/; q; } |
| - /^X\/\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - |
| - |
| -# PATH needs CR, and LINENO needs CR and PATH. |
| -# Avoid depending upon Character Ranges. |
| -as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| -as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| -as_cr_digits='0123456789' |
| -as_cr_alnum=$as_cr_Letters$as_cr_digits |
| - |
| -# The user is always right. |
| -if test "${PATH_SEPARATOR+set}" != set; then |
| - echo "#! /bin/sh" >conf$$.sh |
| - echo "exit 0" >>conf$$.sh |
| - chmod +x conf$$.sh |
| - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| - PATH_SEPARATOR=';' |
| - else |
| - PATH_SEPARATOR=: |
| - fi |
| - rm -f conf$$.sh |
| -fi |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + |
| +# CDPATH. |
| +$as_unset CDPATH |
| |
| |
| - as_lineno_1=$LINENO |
| - as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| - test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" || { |
| - # Find who we are. Look in the path if we contain no path at all |
| - # relative or not. |
| - case $0 in |
| - *[\\/]* ) as_myself=$0 ;; |
| - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in $PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| -done |
| |
| - ;; |
| - esac |
| - # We did not find ourselves, most probably we were run as `sh COMMAND' |
| - # in which case we are not to be found in the path. |
| - if test "x$as_myself" = x; then |
| - as_myself=$0 |
| - fi |
| - if test ! -f "$as_myself"; then |
| - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 |
| -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} |
| - { (exit 1); exit 1; }; } |
| - fi |
| - case $CONFIG_SHELL in |
| - '') |
| - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - for as_base in sh bash ksh sh5; do |
| - case $as_dir in |
| - /*) |
| - if ("$as_dir/$as_base" -c ' |
| as_lineno_1=$LINENO |
| as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then |
| - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } |
| - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } |
| - CONFIG_SHELL=$as_dir/$as_base |
| - export CONFIG_SHELL |
| - exec "$CONFIG_SHELL" "$0" ${1+"$@"} |
| - fi;; |
| - esac |
| - done |
| -done |
| -;; |
| - esac |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| |
| # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| # uniformly replaced by the line number. The first 'sed' inserts a |
| - # line-number line before each line; the second 'sed' does the real |
| - # work. The second script uses 'N' to pair each line-number line |
| - # with the numbered line, and appends trailing '-' during |
| - # substitution so that $LINENO is not a special case at line end. |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) |
| - sed '=' <$as_myself | |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| N |
| - s,$,-, |
| - : loop |
| - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| t loop |
| - s,-$,, |
| - s,^['$as_cr_digits']*\n,, |
| + s/-\n.*// |
| ' >$as_me.lineno && |
| - chmod +x $as_me.lineno || |
| - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 |
| -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} |
| + chmod +x "$as_me.lineno" || |
| + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| { (exit 1); exit 1; }; } |
| |
| # Don't try to exec as it changes $[0], causing all sort of problems |
| # (the dirname of $[0] is not the place where we might find the |
| - # original and so on. Autoconf is especially sensible to this). |
| - . ./$as_me.lineno |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| # Exit status is that of the last command. |
| exit |
| } |
| |
| |
| -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in |
| - *c*,-n*) ECHO_N= ECHO_C=' |
| -' ECHO_T=' ' ;; |
| - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; |
| - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| esac |
| |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| echo >conf$$.file |
| if ln -s conf$$.file conf$$ 2>/dev/null; then |
| - # We could just check for DJGPP; but this test a) works b) is more generic |
| - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). |
| - if test -f conf$$.exe; then |
| - # Don't use ln at all; we don't have any links |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| as_ln_s='cp -p' |
| - else |
| - as_ln_s='ln -s' |
| - fi |
| elif ln conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s=ln |
| else |
| as_ln_s='cp -p' |
| fi |
| -rm -f conf$$ conf$$.exe conf$$.file |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| |
| if mkdir -p . 2>/dev/null; then |
| as_mkdir_p=: |
| @@ -11987,7 +13016,28 @@ |
| as_mkdir_p=false |
| fi |
| |
| -as_executable_p="test -f" |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| |
| # Sed expression to map a string onto a valid CPP name. |
| as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| @@ -11996,31 +13046,14 @@ |
| as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| |
| |
| -# IFS |
| -# We need space, tab and new line, in precisely that order. |
| -as_nl=' |
| -' |
| -IFS=" $as_nl" |
| - |
| -# CDPATH. |
| -$as_unset CDPATH |
| - |
| exec 6>&1 |
| |
| -# Open the log real soon, to keep \$[0] and so on meaningful, and to |
| +# Save the log message, to keep $[0] and so on meaningful, and to |
| # report actual input values of CONFIG_FILES etc. instead of their |
| -# values after options handling. Logging --version etc. is OK. |
| -exec 5>>config.log |
| -{ |
| - echo |
| - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
| -## Running $as_me. ## |
| -_ASBOX |
| -} >&5 |
| -cat >&5 <<_CSEOF |
| - |
| +# values after options handling. |
| +ac_log=" |
| This file was extended by newlib $as_me 1.17.0, which was |
| -generated by GNU Autoconf 2.59. Invocation command line was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| |
| CONFIG_FILES = $CONFIG_FILES |
| CONFIG_HEADERS = $CONFIG_HEADERS |
| @@ -12028,30 +13061,19 @@ |
| CONFIG_COMMANDS = $CONFIG_COMMANDS |
| $ $0 $@ |
| |
| -_CSEOF |
| -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 |
| -echo >&5 |
| +on `(hostname || uname -n) 2>/dev/null | sed 1q` |
| +" |
| + |
| _ACEOF |
| |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| # Files that config.status was made for. |
| -if test -n "$ac_config_files"; then |
| - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS |
| -fi |
| - |
| -if test -n "$ac_config_headers"; then |
| - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS |
| -fi |
| - |
| -if test -n "$ac_config_links"; then |
| - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS |
| -fi |
| +config_files="$ac_config_files" |
| +config_commands="$ac_config_commands" |
| |
| -if test -n "$ac_config_commands"; then |
| - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS |
| -fi |
| +_ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| - |
| ac_cs_usage="\ |
| \`$as_me' instantiates files from templates according to the |
| current configuration. |
| @@ -12059,7 +13081,7 @@ |
| Usage: $0 [OPTIONS] [FILE]... |
| |
| -h, --help print this help, then exit |
| - -V, --version print version number, then exit |
| + -V, --version print version number and configuration settings, then exit |
| -q, --quiet do not print progress messages |
| -d, --debug don't remove temporary files |
| --recheck update $as_me by reconfiguring in the same conditions |
| @@ -12073,19 +13095,21 @@ |
| $config_commands |
| |
| Report bugs to <bug-autoconf@gnu.org>." |
| -_ACEOF |
| |
| +_ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| ac_cs_version="\\ |
| newlib config.status 1.17.0 |
| -configured by $0, generated by GNU Autoconf 2.59, |
| - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" |
| +configured by $0, generated by GNU Autoconf 2.61, |
| + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" |
| |
| -Copyright (C) 2003 Free Software Foundation, Inc. |
| +Copyright (C) 2006 Free Software Foundation, Inc. |
| This config.status script is free software; the Free Software Foundation |
| gives unlimited permission to copy, distribute and modify it." |
| -srcdir=$srcdir |
| -INSTALL="$INSTALL" |
| + |
| +ac_pwd='$ac_pwd' |
| +srcdir='$srcdir' |
| +INSTALL='$INSTALL' |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| @@ -12096,60 +13120,42 @@ |
| do |
| case $1 in |
| --*=*) |
| - ac_option=`expr "x$1" : 'x\([^=]*\)='` |
| - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` |
| + ac_option=`expr "X$1" : 'X\([^=]*\)='` |
| + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` |
| ac_shift=: |
| ;; |
| - -*) |
| + *) |
| ac_option=$1 |
| ac_optarg=$2 |
| ac_shift=shift |
| ;; |
| - *) # This is not an option, so the user has probably given explicit |
| - # arguments. |
| - ac_option=$1 |
| - ac_need_defaults=false;; |
| esac |
| |
| case $ac_option in |
| # Handling of the options. |
| -_ACEOF |
| -cat >>$CONFIG_STATUS <<\_ACEOF |
| -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
| ac_cs_recheck=: ;; |
| - --version | --vers* | -V ) |
| - echo "$ac_cs_version"; exit 0 ;; |
| - --he | --h) |
| - # Conflict between --help and --header |
| - { { echo "$as_me:$LINENO: error: ambiguous option: $1 |
| -Try \`$0 --help' for more information." >&5 |
| -echo "$as_me: error: ambiguous option: $1 |
| -Try \`$0 --help' for more information." >&2;} |
| - { (exit 1); exit 1; }; };; |
| - --help | --hel | -h ) |
| - echo "$ac_cs_usage"; exit 0 ;; |
| - --debug | --d* | -d ) |
| + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) |
| + echo "$ac_cs_version"; exit ;; |
| + --debug | --debu | --deb | --de | --d | -d ) |
| debug=: ;; |
| --file | --fil | --fi | --f ) |
| $ac_shift |
| CONFIG_FILES="$CONFIG_FILES $ac_optarg" |
| ac_need_defaults=false;; |
| - --header | --heade | --head | --hea ) |
| - $ac_shift |
| - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" |
| - ac_need_defaults=false;; |
| + --he | --h | --help | --hel | -h ) |
| + echo "$ac_cs_usage"; exit ;; |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil | --si | --s) |
| ac_cs_silent=: ;; |
| |
| # This is an error. |
| - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 |
| -Try \`$0 --help' for more information." >&5 |
| -echo "$as_me: error: unrecognized option: $1 |
| -Try \`$0 --help' for more information." >&2;} |
| + -*) { echo "$as_me: error: unrecognized option: $1 |
| +Try \`$0 --help' for more information." >&2 |
| { (exit 1); exit 1; }; } ;; |
| |
| - *) ac_config_targets="$ac_config_targets $1" ;; |
| + *) ac_config_targets="$ac_config_targets $1" |
| + ac_need_defaults=false ;; |
| |
| esac |
| shift |
| @@ -12165,17 +13171,28 @@ |
| _ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| if \$ac_cs_recheck; then |
| - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
| - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
| + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
| + CONFIG_SHELL=$SHELL |
| + export CONFIG_SHELL |
| + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
| fi |
| |
| _ACEOF |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +exec 5>>config.log |
| +{ |
| + echo |
| + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
| +## Running $as_me. ## |
| +_ASBOX |
| + echo "$ac_log" |
| +} >&5 |
| |
| +_ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| # |
| -# INIT-COMMANDS section. |
| +# INIT-COMMANDS |
| # |
| - |
| AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" |
| |
| |
| @@ -12436,22 +13453,23 @@ |
| |
| _ACEOF |
| |
| - |
| - |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| + |
| +# Handling of arguments. |
| for ac_config_target in $ac_config_targets |
| do |
| - case "$ac_config_target" in |
| - # Handling of arguments. |
| - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
| - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
| - "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; |
| + case $ac_config_target in |
| + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
| + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; |
| + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
| + |
| *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
| echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
| { (exit 1); exit 1; }; };; |
| esac |
| done |
| |
| + |
| # If the user did not use the arguments to specify the items to instantiate, |
| # then the envvar interface is used. Set only those that are not. |
| # We use the long form for the default assignment because of an extremely |
| @@ -12462,396 +13480,492 @@ |
| fi |
| |
| # Have a temporary directory for convenience. Make it in the build tree |
| -# simply because there is no reason to put it here, and in addition, |
| +# simply because there is no reason against having it here, and in addition, |
| # creating and moving files from /tmp can sometimes cause problems. |
| -# Create a temporary directory, and hook for its removal unless debugging. |
| +# Hook for its removal unless debugging. |
| +# Note that there is a small window in which the directory will not be cleaned: |
| +# after its creation but before its name has been assigned to `$tmp'. |
| $debug || |
| { |
| - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 |
| + tmp= |
| + trap 'exit_status=$? |
| + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status |
| +' 0 |
| trap '{ (exit 1); exit 1; }' 1 2 13 15 |
| } |
| - |
| # Create a (secure) tmp directory for tmp files. |
| |
| { |
| - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && |
| + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && |
| test -n "$tmp" && test -d "$tmp" |
| } || |
| { |
| - tmp=./confstat$$-$RANDOM |
| - (umask 077 && mkdir $tmp) |
| + tmp=./conf$$-$RANDOM |
| + (umask 077 && mkdir "$tmp") |
| } || |
| { |
| echo "$me: cannot create a temporary directory in ." >&2 |
| { (exit 1); exit 1; } |
| } |
| |
| -_ACEOF |
| - |
| -cat >>$CONFIG_STATUS <<_ACEOF |
| - |
| # |
| -# CONFIG_FILES section. |
| +# Set up the sed scripts for CONFIG_FILES section. |
| # |
| |
| # No need to generate the scripts if there are no CONFIG_FILES. |
| # This happens for instance when ./config.status config.h |
| -if test -n "\$CONFIG_FILES"; then |
| - # Protect against being on the right side of a sed subst in config.status. |
| - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; |
| - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF |
| -s,@SHELL@,$SHELL,;t t |
| -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t |
| -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t |
| -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t |
| -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t |
| -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t |
| -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t |
| -s,@exec_prefix@,$exec_prefix,;t t |
| -s,@prefix@,$prefix,;t t |
| -s,@program_transform_name@,$program_transform_name,;t t |
| -s,@bindir@,$bindir,;t t |
| -s,@sbindir@,$sbindir,;t t |
| -s,@libexecdir@,$libexecdir,;t t |
| -s,@datadir@,$datadir,;t t |
| -s,@sysconfdir@,$sysconfdir,;t t |
| -s,@sharedstatedir@,$sharedstatedir,;t t |
| -s,@localstatedir@,$localstatedir,;t t |
| -s,@libdir@,$libdir,;t t |
| -s,@includedir@,$includedir,;t t |
| -s,@oldincludedir@,$oldincludedir,;t t |
| -s,@infodir@,$infodir,;t t |
| -s,@mandir@,$mandir,;t t |
| -s,@build_alias@,$build_alias,;t t |
| -s,@host_alias@,$host_alias,;t t |
| -s,@target_alias@,$target_alias,;t t |
| -s,@DEFS@,$DEFS,;t t |
| -s,@ECHO_C@,$ECHO_C,;t t |
| -s,@ECHO_N@,$ECHO_N,;t t |
| -s,@ECHO_T@,$ECHO_T,;t t |
| -s,@LIBS@,$LIBS,;t t |
| -s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t |
| -s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t |
| -s,@newlib_basedir@,$newlib_basedir,;t t |
| -s,@build@,$build,;t t |
| -s,@build_cpu@,$build_cpu,;t t |
| -s,@build_vendor@,$build_vendor,;t t |
| -s,@build_os@,$build_os,;t t |
| -s,@host@,$host,;t t |
| -s,@host_cpu@,$host_cpu,;t t |
| -s,@host_vendor@,$host_vendor,;t t |
| -s,@host_os@,$host_os,;t t |
| -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t |
| -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t |
| -s,@INSTALL_DATA@,$INSTALL_DATA,;t t |
| -s,@CYGPATH_W@,$CYGPATH_W,;t t |
| -s,@PACKAGE@,$PACKAGE,;t t |
| -s,@VERSION@,$VERSION,;t t |
| -s,@ACLOCAL@,$ACLOCAL,;t t |
| -s,@AUTOCONF@,$AUTOCONF,;t t |
| -s,@AUTOMAKE@,$AUTOMAKE,;t t |
| -s,@AUTOHEADER@,$AUTOHEADER,;t t |
| -s,@MAKEINFO@,$MAKEINFO,;t t |
| -s,@install_sh@,$install_sh,;t t |
| -s,@STRIP@,$STRIP,;t t |
| -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t |
| -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t |
| -s,@mkdir_p@,$mkdir_p,;t t |
| -s,@AWK@,$AWK,;t t |
| -s,@SET_MAKE@,$SET_MAKE,;t t |
| -s,@am__leading_dot@,$am__leading_dot,;t t |
| -s,@AMTAR@,$AMTAR,;t t |
| -s,@am__tar@,$am__tar,;t t |
| -s,@am__untar@,$am__untar,;t t |
| -s,@CC@,$CC,;t t |
| -s,@DEPDIR@,$DEPDIR,;t t |
| -s,@am__include@,$am__include,;t t |
| -s,@am__quote@,$am__quote,;t t |
| -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t |
| -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t |
| -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t |
| -s,@CCDEPMODE@,$CCDEPMODE,;t t |
| -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t |
| -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t |
| -s,@AS@,$AS,;t t |
| -s,@ac_ct_AS@,$ac_ct_AS,;t t |
| -s,@AR@,$AR,;t t |
| -s,@ac_ct_AR@,$ac_ct_AR,;t t |
| -s,@RANLIB@,$RANLIB,;t t |
| -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t |
| -s,@READELF@,$READELF,;t t |
| -s,@ac_ct_READELF@,$ac_ct_READELF,;t t |
| -s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t |
| -s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t |
| -s,@MAINT@,$MAINT,;t t |
| -s,@CCAS@,$CCAS,;t t |
| -s,@CCASFLAGS@,$CCASFLAGS,;t t |
| -s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t |
| -s,@LDFLAGS@,$LDFLAGS,;t t |
| -s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t |
| -s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t |
| -s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t |
| -s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t |
| -s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t |
| -s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t |
| -s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t |
| -s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t |
| -s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t |
| -s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t |
| -s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t |
| -s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t |
| -s,@OBJEXT@,$OBJEXT,;t t |
| -s,@oext@,$oext,;t t |
| -s,@aext@,$aext,;t t |
| -s,@lpfx@,$lpfx,;t t |
| -s,@libm_machine_dir@,$libm_machine_dir,;t t |
| -s,@machine_dir@,$machine_dir,;t t |
| -s,@sys_dir@,$sys_dir,;t t |
| -s,@SED@,$SED,;t t |
| -s,@DLLTOOL@,$DLLTOOL,;t t |
| -s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t |
| -s,@OBJDUMP@,$OBJDUMP,;t t |
| -s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t |
| -s,@LIBTOOL@,$LIBTOOL,;t t |
| -s,@CFLAGS@,$CFLAGS,;t t |
| -s,@CPPFLAGS@,$CPPFLAGS,;t t |
| -s,@ac_ct_CC@,$ac_ct_CC,;t t |
| -s,@EXEEXT@,$EXEEXT,;t t |
| -s,@EGREP@,$EGREP,;t t |
| -s,@FGREP@,$FGREP,;t t |
| -s,@GREP@,$GREP,;t t |
| -s,@LD@,$LD,;t t |
| -s,@DUMPBIN@,$DUMPBIN,;t t |
| -s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t |
| -s,@NM@,$NM,;t t |
| -s,@LN_S@,$LN_S,;t t |
| -s,@lt_ECHO@,$lt_ECHO,;t t |
| -s,@DSYMUTIL@,$DSYMUTIL,;t t |
| -s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t |
| -s,@NMEDIT@,$NMEDIT,;t t |
| -s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t |
| -s,@LIPO@,$LIPO,;t t |
| -s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t |
| -s,@OTOOL@,$OTOOL,;t t |
| -s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t |
| -s,@OTOOL64@,$OTOOL64,;t t |
| -s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t |
| -s,@CPP@,$CPP,;t t |
| -s,@subdirs@,$subdirs,;t t |
| -s,@HAVE_MACHINE_DIR_TRUE@,$HAVE_MACHINE_DIR_TRUE,;t t |
| -s,@HAVE_MACHINE_DIR_FALSE@,$HAVE_MACHINE_DIR_FALSE,;t t |
| -s,@LIBOBJS@,$LIBOBJS,;t t |
| -s,@LTLIBOBJS@,$LTLIBOBJS,;t t |
| -CEOF |
| - |
| -_ACEOF |
| - |
| - cat >>$CONFIG_STATUS <<\_ACEOF |
| - # Split the substitutions into bite-sized pieces for seds with |
| - # small command number limits, like on Digital OSF/1 and HP-UX. |
| - ac_max_sed_lines=48 |
| - ac_sed_frag=1 # Number of current file. |
| - ac_beg=1 # First line for current file. |
| - ac_end=$ac_max_sed_lines # Line after last line for current file. |
| - ac_more_lines=: |
| - ac_sed_cmds= |
| - while $ac_more_lines; do |
| - if test $ac_beg -gt 1; then |
| - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag |
| - else |
| - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag |
| - fi |
| - if test ! -s $tmp/subs.frag; then |
| - ac_more_lines=false |
| - else |
| - # The purpose of the label and of the branching condition is to |
| - # speed up the sed processing (if there are no `@' at all, there |
| - # is no need to browse any of the substitutions). |
| - # These are the two extra sed commands mentioned above. |
| - (echo ':t |
| - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed |
| - if test -z "$ac_sed_cmds"; then |
| - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" |
| - else |
| - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" |
| - fi |
| - ac_sed_frag=`expr $ac_sed_frag + 1` |
| - ac_beg=$ac_end |
| - ac_end=`expr $ac_end + $ac_max_sed_lines` |
| - fi |
| - done |
| - if test -z "$ac_sed_cmds"; then |
| - ac_sed_cmds=cat |
| +if test -n "$CONFIG_FILES"; then |
| + |
| +_ACEOF |
| + |
| + |
| + |
| +ac_delim='%!_!# ' |
| +for ac_last_try in false false false false false :; do |
| + cat >conf$$subs.sed <<_ACEOF |
| +SHELL!$SHELL$ac_delim |
| +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim |
| +PACKAGE_NAME!$PACKAGE_NAME$ac_delim |
| +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim |
| +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim |
| +PACKAGE_STRING!$PACKAGE_STRING$ac_delim |
| +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim |
| +exec_prefix!$exec_prefix$ac_delim |
| +prefix!$prefix$ac_delim |
| +program_transform_name!$program_transform_name$ac_delim |
| +bindir!$bindir$ac_delim |
| +sbindir!$sbindir$ac_delim |
| +libexecdir!$libexecdir$ac_delim |
| +datarootdir!$datarootdir$ac_delim |
| +datadir!$datadir$ac_delim |
| +sysconfdir!$sysconfdir$ac_delim |
| +sharedstatedir!$sharedstatedir$ac_delim |
| +localstatedir!$localstatedir$ac_delim |
| +includedir!$includedir$ac_delim |
| +oldincludedir!$oldincludedir$ac_delim |
| +docdir!$docdir$ac_delim |
| +infodir!$infodir$ac_delim |
| +htmldir!$htmldir$ac_delim |
| +dvidir!$dvidir$ac_delim |
| +pdfdir!$pdfdir$ac_delim |
| +psdir!$psdir$ac_delim |
| +libdir!$libdir$ac_delim |
| +localedir!$localedir$ac_delim |
| +mandir!$mandir$ac_delim |
| +DEFS!$DEFS$ac_delim |
| +ECHO_C!$ECHO_C$ac_delim |
| +ECHO_N!$ECHO_N$ac_delim |
| +ECHO_T!$ECHO_T$ac_delim |
| +LIBS!$LIBS$ac_delim |
| +build_alias!$build_alias$ac_delim |
| +host_alias!$host_alias$ac_delim |
| +target_alias!$target_alias$ac_delim |
| +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim |
| +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim |
| +newlib_basedir!$newlib_basedir$ac_delim |
| +build!$build$ac_delim |
| +build_cpu!$build_cpu$ac_delim |
| +build_vendor!$build_vendor$ac_delim |
| +build_os!$build_os$ac_delim |
| +host!$host$ac_delim |
| +host_cpu!$host_cpu$ac_delim |
| +host_vendor!$host_vendor$ac_delim |
| +host_os!$host_os$ac_delim |
| +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim |
| +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim |
| +INSTALL_DATA!$INSTALL_DATA$ac_delim |
| +CYGPATH_W!$CYGPATH_W$ac_delim |
| +PACKAGE!$PACKAGE$ac_delim |
| +VERSION!$VERSION$ac_delim |
| +ACLOCAL!$ACLOCAL$ac_delim |
| +AUTOCONF!$AUTOCONF$ac_delim |
| +AUTOMAKE!$AUTOMAKE$ac_delim |
| +AUTOHEADER!$AUTOHEADER$ac_delim |
| +MAKEINFO!$MAKEINFO$ac_delim |
| +install_sh!$install_sh$ac_delim |
| +STRIP!$STRIP$ac_delim |
| +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim |
| +mkdir_p!$mkdir_p$ac_delim |
| +AWK!$AWK$ac_delim |
| +SET_MAKE!$SET_MAKE$ac_delim |
| +am__leading_dot!$am__leading_dot$ac_delim |
| +AMTAR!$AMTAR$ac_delim |
| +am__tar!$am__tar$ac_delim |
| +am__untar!$am__untar$ac_delim |
| +CC!$CC$ac_delim |
| +DEPDIR!$DEPDIR$ac_delim |
| +am__include!$am__include$ac_delim |
| +am__quote!$am__quote$ac_delim |
| +AMDEP_TRUE!$AMDEP_TRUE$ac_delim |
| +AMDEP_FALSE!$AMDEP_FALSE$ac_delim |
| +AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim |
| +CCDEPMODE!$CCDEPMODE$ac_delim |
| +am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim |
| +am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim |
| +AS!$AS$ac_delim |
| +AR!$AR$ac_delim |
| +RANLIB!$RANLIB$ac_delim |
| +READELF!$READELF$ac_delim |
| +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim |
| +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim |
| +MAINT!$MAINT$ac_delim |
| +CCAS!$CCAS$ac_delim |
| +CCASFLAGS!$CCASFLAGS$ac_delim |
| +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim |
| +LDFLAGS!$LDFLAGS$ac_delim |
| +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim |
| +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim |
| +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim |
| +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim |
| +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim |
| +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim |
| +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim |
| +_ACEOF |
| + |
| + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then |
| + break |
| + elif $ac_last_try; then |
| + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 |
| +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} |
| + { (exit 1); exit 1; }; } |
| + else |
| + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " |
| fi |
| -fi # test -n "$CONFIG_FILES" |
| +done |
| + |
| +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` |
| +if test -n "$ac_eof"; then |
| + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` |
| + ac_eof=`expr $ac_eof + 1` |
| +fi |
| + |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
| +_ACEOF |
| +sed ' |
| +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g |
| +s/^/s,@/; s/!/@,|#_!!_#|/ |
| +:n |
| +t n |
| +s/'"$ac_delim"'$/,g/; t |
| +s/$/\\/; p |
| +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n |
| +' >>$CONFIG_STATUS <conf$$subs.sed |
| +rm -f conf$$subs.sed |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +CEOF$ac_eof |
| +_ACEOF |
| + |
| + |
| +ac_delim='%!_!# ' |
| +for ac_last_try in false false false false false :; do |
| + cat >conf$$subs.sed <<_ACEOF |
| +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim |
| +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim |
| +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim |
| +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim |
| +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim |
| +OBJEXT!$OBJEXT$ac_delim |
| +oext!$oext$ac_delim |
| +aext!$aext$ac_delim |
| +lpfx!$lpfx$ac_delim |
| +libm_machine_dir!$libm_machine_dir$ac_delim |
| +machine_dir!$machine_dir$ac_delim |
| +sys_dir!$sys_dir$ac_delim |
| +SED!$SED$ac_delim |
| +DLLTOOL!$DLLTOOL$ac_delim |
| +OBJDUMP!$OBJDUMP$ac_delim |
| +LIBTOOL!$LIBTOOL$ac_delim |
| +CFLAGS!$CFLAGS$ac_delim |
| +CPPFLAGS!$CPPFLAGS$ac_delim |
| +ac_ct_CC!$ac_ct_CC$ac_delim |
| +EXEEXT!$EXEEXT$ac_delim |
| +GREP!$GREP$ac_delim |
| +EGREP!$EGREP$ac_delim |
| +FGREP!$FGREP$ac_delim |
| +LD!$LD$ac_delim |
| +DUMPBIN!$DUMPBIN$ac_delim |
| +ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim |
| +NM!$NM$ac_delim |
| +LN_S!$LN_S$ac_delim |
| +lt_ECHO!$lt_ECHO$ac_delim |
| +DSYMUTIL!$DSYMUTIL$ac_delim |
| +NMEDIT!$NMEDIT$ac_delim |
| +LIPO!$LIPO$ac_delim |
| +OTOOL!$OTOOL$ac_delim |
| +OTOOL64!$OTOOL64$ac_delim |
| +CPP!$CPP$ac_delim |
| +subdirs!$subdirs$ac_delim |
| +HAVE_MACHINE_DIR_TRUE!$HAVE_MACHINE_DIR_TRUE$ac_delim |
| +HAVE_MACHINE_DIR_FALSE!$HAVE_MACHINE_DIR_FALSE$ac_delim |
| +LIBOBJS!$LIBOBJS$ac_delim |
| +LTLIBOBJS!$LTLIBOBJS$ac_delim |
| +_ACEOF |
| + |
| + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 40; then |
| + break |
| + elif $ac_last_try; then |
| + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 |
| +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} |
| + { (exit 1); exit 1; }; } |
| + else |
| + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " |
| + fi |
| +done |
| + |
| +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` |
| +if test -n "$ac_eof"; then |
| + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` |
| + ac_eof=`expr $ac_eof + 1` |
| +fi |
| |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end |
| +_ACEOF |
| +sed ' |
| +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g |
| +s/^/s,@/; s/!/@,|#_!!_#|/ |
| +:n |
| +t n |
| +s/'"$ac_delim"'$/,g/; t |
| +s/$/\\/; p |
| +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n |
| +' >>$CONFIG_STATUS <conf$$subs.sed |
| +rm -f conf$$subs.sed |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +:end |
| +s/|#_!!_#|//g |
| +CEOF$ac_eof |
| _ACEOF |
| + |
| + |
| +# VPATH may cause trouble with some makes, so we remove $(srcdir), |
| +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
| +# trailing colons and then remove the whole line if VPATH becomes empty |
| +# (actually we leave an empty line to preserve line numbers). |
| +if test "x$srcdir" = x.; then |
| + ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
| +s/:*\$(srcdir):*/:/ |
| +s/:*\${srcdir}:*/:/ |
| +s/:*@srcdir@:*/:/ |
| +s/^\([^=]*=[ ]*\):*/\1/ |
| +s/:*$// |
| +s/^[^=]*=[ ]*$// |
| +}' |
| +fi |
| + |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue |
| - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". |
| - case $ac_file in |
| - - | *:- | *:-:* ) # input from stdin |
| - cat >$tmp/stdin |
| - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` |
| - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; |
| - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` |
| - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; |
| - * ) ac_file_in=$ac_file.in ;; |
| +fi # test -n "$CONFIG_FILES" |
| + |
| + |
| +for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS |
| +do |
| + case $ac_tag in |
| + :[FHLC]) ac_mode=$ac_tag; continue;; |
| + esac |
| + case $ac_mode$ac_tag in |
| + :[FHL]*:*);; |
| + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 |
| +echo "$as_me: error: Invalid tag $ac_tag." >&2;} |
| + { (exit 1); exit 1; }; };; |
| + :[FH]-) ac_tag=-:-;; |
| + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; |
| + esac |
| + ac_save_IFS=$IFS |
| + IFS=: |
| + set x $ac_tag |
| + IFS=$ac_save_IFS |
| + shift |
| + ac_file=$1 |
| + shift |
| + |
| + case $ac_mode in |
| + :L) ac_source=$1;; |
| + :[FH]) |
| + ac_file_inputs= |
| + for ac_f |
| + do |
| + case $ac_f in |
| + -) ac_f="$tmp/stdin";; |
| + *) # Look for the file first in the build tree, then in the source tree |
| + # (if the path is not absolute). The absolute path cannot be DOS-style, |
| + # because $ac_f cannot contain `:'. |
| + test -f "$ac_f" || |
| + case $ac_f in |
| + [\\/$]*) false;; |
| + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; |
| + esac || |
| + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 |
| +echo "$as_me: error: cannot find input file: $ac_f" >&2;} |
| + { (exit 1); exit 1; }; };; |
| + esac |
| + ac_file_inputs="$ac_file_inputs $ac_f" |
| + done |
| + |
| + # Let's still pretend it is `configure' which instantiates (i.e., don't |
| + # use $as_me), people would be surprised to read: |
| + # /* config.h. Generated by config.status. */ |
| + configure_input="Generated from "`IFS=: |
| + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." |
| + if test x"$ac_file" != x-; then |
| + configure_input="$ac_file. $configure_input" |
| + { echo "$as_me:$LINENO: creating $ac_file" >&5 |
| +echo "$as_me: creating $ac_file" >&6;} |
| + fi |
| + |
| + case $ac_tag in |
| + *:-:* | *:-) cat >"$tmp/stdin";; |
| + esac |
| + ;; |
| esac |
| |
| - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. |
| - ac_dir=`(dirname "$ac_file") 2>/dev/null || |
| + ac_dir=`$as_dirname -- "$ac_file" || |
| $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$ac_file" : 'X\(//\)[^/]' \| \ |
| X"$ac_file" : 'X\(//\)$' \| \ |
| - X"$ac_file" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$ac_file" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - { if $as_mkdir_p; then |
| - mkdir -p "$ac_dir" |
| - else |
| - as_dir="$ac_dir" |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + { as_dir="$ac_dir" |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$as_dir" : 'X\(//\)[^/]' \| \ |
| X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 |
| -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| { (exit 1); exit 1; }; }; } |
| - |
| ac_builddir=. |
| |
| -if test "$ac_dir" != .; then |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| + .) # We are building in place. |
| ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| +esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| -esac |
| |
| + case $ac_mode in |
| + :F) |
| + # |
| + # CONFIG_FILE |
| + # |
| |
| case $INSTALL in |
| [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; |
| - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; |
| + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; |
| esac |
| +_ACEOF |
| |
| - if test x"$ac_file" != x-; then |
| - { echo "$as_me:$LINENO: creating $ac_file" >&5 |
| -echo "$as_me: creating $ac_file" >&6;} |
| - rm -f "$ac_file" |
| - fi |
| - # Let's still pretend it is `configure' which instantiates (i.e., don't |
| - # use $as_me), people would be surprised to read: |
| - # /* config.h. Generated by config.status. */ |
| - if test x"$ac_file" = x-; then |
| - configure_input= |
| - else |
| - configure_input="$ac_file. " |
| - fi |
| - configure_input=$configure_input"Generated from `echo $ac_file_in | |
| - sed 's,.*/,,'` by configure." |
| - |
| - # First look for the input files in the build tree, otherwise in the |
| - # src tree. |
| - ac_file_inputs=`IFS=: |
| - for f in $ac_file_in; do |
| - case $f in |
| - -) echo $tmp/stdin ;; |
| - [\\/$]*) |
| - # Absolute (can't be DOS-style, as IFS=:) |
| - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 |
| -echo "$as_me: error: cannot find input file: $f" >&2;} |
| - { (exit 1); exit 1; }; } |
| - echo "$f";; |
| - *) # Relative |
| - if test -f "$f"; then |
| - # Build tree |
| - echo "$f" |
| - elif test -f "$srcdir/$f"; then |
| - # Source tree |
| - echo "$srcdir/$f" |
| - else |
| - # /dev/null tree |
| - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 |
| -echo "$as_me: error: cannot find input file: $f" >&2;} |
| - { (exit 1); exit 1; }; } |
| - fi;; |
| - esac |
| - done` || { (exit 1); exit 1; } |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +# If the template does not know about datarootdir, expand it. |
| +# FIXME: This hack should be removed a few years after 2.60. |
| +ac_datarootdir_hack=; ac_datarootdir_seen= |
| + |
| +case `sed -n '/datarootdir/ { |
| + p |
| + q |
| +} |
| +/@datadir@/p |
| +/@docdir@/p |
| +/@infodir@/p |
| +/@localedir@/p |
| +/@mandir@/p |
| +' $ac_file_inputs` in |
| +*datarootdir*) ac_datarootdir_seen=yes;; |
| +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) |
| + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 |
| +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| + ac_datarootdir_hack=' |
| + s&@datadir@&$datadir&g |
| + s&@docdir@&$docdir&g |
| + s&@infodir@&$infodir&g |
| + s&@localedir@&$localedir&g |
| + s&@mandir@&$mandir&g |
| + s&\\\${datarootdir}&$datarootdir&g' ;; |
| +esac |
| _ACEOF |
| + |
| +# Neutralize VPATH when `$srcdir' = `.'. |
| +# Shell code in configure.ac might set extrasub. |
| +# FIXME: do we really want to maintain this feature? |
| cat >>$CONFIG_STATUS <<_ACEOF |
| sed "$ac_vpsub |
| $extrasub |
| @@ -12859,142 +13973,43 @@ |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| :t |
| /@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
| -s,@configure_input@,$configure_input,;t t |
| -s,@srcdir@,$ac_srcdir,;t t |
| -s,@abs_srcdir@,$ac_abs_srcdir,;t t |
| -s,@top_srcdir@,$ac_top_srcdir,;t t |
| -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t |
| -s,@builddir@,$ac_builddir,;t t |
| -s,@abs_builddir@,$ac_abs_builddir,;t t |
| -s,@top_builddir@,$ac_top_builddir,;t t |
| -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t |
| -s,@INSTALL@,$ac_INSTALL,;t t |
| -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out |
| - rm -f $tmp/stdin |
| - if test x"$ac_file" != x-; then |
| - mv $tmp/out $ac_file |
| - else |
| - cat $tmp/out |
| - rm -f $tmp/out |
| - fi |
| - |
| -done |
| -_ACEOF |
| -cat >>$CONFIG_STATUS <<\_ACEOF |
| - |
| -# |
| -# CONFIG_COMMANDS section. |
| -# |
| -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue |
| - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` |
| - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` |
| - ac_dir=`(dirname "$ac_dest") 2>/dev/null || |
| -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| - X"$ac_dest" : 'X\(//\)[^/]' \| \ |
| - X"$ac_dest" : 'X\(//\)$' \| \ |
| - X"$ac_dest" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| -echo X"$ac_dest" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - { if $as_mkdir_p; then |
| - mkdir -p "$ac_dir" |
| - else |
| - as_dir="$ac_dir" |
| - as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| - X"$as_dir" : 'X\(//\)[^/]' \| \ |
| - X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| -echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 |
| -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} |
| - { (exit 1); exit 1; }; }; } |
| +s&@configure_input@&$configure_input&;t t |
| +s&@top_builddir@&$ac_top_builddir_sub&;t t |
| +s&@srcdir@&$ac_srcdir&;t t |
| +s&@abs_srcdir@&$ac_abs_srcdir&;t t |
| +s&@top_srcdir@&$ac_top_srcdir&;t t |
| +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t |
| +s&@builddir@&$ac_builddir&;t t |
| +s&@abs_builddir@&$ac_abs_builddir&;t t |
| +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t |
| +s&@INSTALL@&$ac_INSTALL&;t t |
| +$ac_datarootdir_hack |
| +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out |
| + |
| +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && |
| + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && |
| + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && |
| + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&5 |
| +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&2;} |
| |
| - ac_builddir=. |
| - |
| -if test "$ac_dir" != .; then |
| - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + rm -f "$tmp/stdin" |
| + case $ac_file in |
| + -) cat "$tmp/out"; rm -f "$tmp/out";; |
| + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; |
| + esac |
| + ;; |
| |
| -case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| - ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| - ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| -esac |
| + :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 |
| +echo "$as_me: executing $ac_file commands" >&6;} |
| + ;; |
| + esac |
| |
| |
| - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 |
| -echo "$as_me: executing $ac_dest commands" >&6;} |
| - case $ac_dest in |
| - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do |
| + case $ac_file$ac_mode in |
| + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do |
| # Strip MF so we end up with the name of the file. |
| mf=`echo "$mf" | sed -e 's/:.*$//'` |
| # Check whether this is an Automake generated Makefile or not. |
| @@ -13004,18 +14019,29 @@ |
| # each Makefile.in and add a new line on top of each file to say so. |
| # So let's grep whole file. |
| if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then |
| - dirpart=`(dirname "$mf") 2>/dev/null || |
| + dirpart=`$as_dirname -- "$mf" || |
| $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$mf" : 'X\(//\)[^/]' \| \ |
| X"$mf" : 'X\(//\)$' \| \ |
| - X"$mf" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$mf" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$mf" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| else |
| continue |
| fi |
| @@ -13037,49 +14063,76 @@ |
| sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do |
| # Make sure the directory exists. |
| test -f "$dirpart/$file" && continue |
| - fdir=`(dirname "$file") 2>/dev/null || |
| + fdir=`$as_dirname -- "$file" || |
| $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$file" : 'X\(//\)[^/]' \| \ |
| X"$file" : 'X\(//\)$' \| \ |
| - X"$file" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$file" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$file" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - { if $as_mkdir_p; then |
| - mkdir -p $dirpart/$fdir |
| - else |
| - as_dir=$dirpart/$fdir |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + { as_dir=$dirpart/$fdir |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$as_dir" : 'X\(//\)[^/]' \| \ |
| X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 |
| -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| { (exit 1); exit 1; }; }; } |
| - |
| # echo "creating $dirpart/$file" |
| echo '# dummy' > "$dirpart/$file" |
| done |
| done |
| ;; |
| - libtool ) |
| + "libtool":C) |
| |
| # See if we are running on zsh, and set the options which allow our |
| # commands through without removal of \ escapes. |
| @@ -13720,11 +14773,10 @@ |
| chmod +x "$ofile" |
| |
| ;; |
| + |
| esac |
| -done |
| -_ACEOF |
| +done # for ac_tag |
| |
| -cat >>$CONFIG_STATUS <<\_ACEOF |
| |
| { (exit 0); exit 0; } |
| _ACEOF |
| @@ -13754,7 +14806,7 @@ |
| fi |
| |
| # |
| -# CONFIG_SUBDIRS section, as fixed in confsubdir.m4. |
| +# CONFIG_SUBDIRS section. |
| # |
| if test "$no_recursion" != yes; then |
| |
| @@ -13801,7 +14853,12 @@ |
| case $ac_arg in |
| *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| esac |
| - ac_sub_configure_args="$ac_arg $ac_sub_configure_args" |
| + ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" |
| + |
| + # Pass --silent |
| + if test "$silent" = yes; then |
| + ac_sub_configure_args="--silent $ac_sub_configure_args" |
| + fi |
| |
| ac_popdir=`pwd` |
| for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue |
| @@ -13810,97 +14867,83 @@ |
| # parts of a large source tree are present. |
| test -d "$srcdir/$ac_dir" || continue |
| |
| - { echo "$as_me:$LINENO: configuring in $ac_dir" >&5 |
| -echo "$as_me: configuring in $ac_dir" >&6;} |
| - { if $as_mkdir_p; then |
| - mkdir -p "$ac_dir" |
| - else |
| - as_dir="$ac_dir" |
| + ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" |
| + echo "$as_me:$LINENO: $ac_msg" >&5 |
| + echo "$ac_msg" >&6 |
| + { as_dir="$ac_dir" |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$as_dir" : 'X\(//\)[^/]' \| \ |
| X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 |
| -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| { (exit 1); exit 1; }; }; } |
| - |
| ac_builddir=. |
| |
| -if test "$ac_dir" != .; then |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| + .) # We are building in place. |
| ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| - |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| |
| cd "$ac_dir" |
| @@ -13924,8 +14967,8 @@ |
| # Make the cache file name correct relative to the subdirectory. |
| case $cache_file in |
| [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; |
| - *) # Relative path. |
| - ac_sub_cache_file=$ac_top_builddir$cache_file ;; |
| + *) # Relative name. |
| + ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; |
| esac |
| |
| { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 |
| diff -Naur newlib-1.17.0/newlib/libc/machine/configure.in newlib-1.17.0-new/newlib/libc/machine/configure.in |
| --- newlib-1.17.0/newlib/libc/machine/configure.in 2008-12-11 21:05:38.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/machine/configure.in 2009-05-22 09:57:50.000000000 +0200 |
| @@ -24,6 +24,7 @@ |
| case ${machine_dir} in |
| a29k) AC_CONFIG_SUBDIRS(a29k) ;; |
| arm) AC_CONFIG_SUBDIRS(arm) ;; |
| + avr32) AC_CONFIG_SUBDIRS(avr32) ;; |
| bfin) AC_CONFIG_SUBDIRS(bfin) ;; |
| cris) AC_CONFIG_SUBDIRS(cris) ;; |
| crx) AC_CONFIG_SUBDIRS(crx) ;; |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4 |
| --- newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,366 @@ |
| +dnl aclocal.m4 generated automatically by aclocal 1.4-p6 |
| + |
| +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. |
| +dnl This file is free software; the Free Software Foundation |
| +dnl gives unlimited permission to copy and/or distribute it, |
| +dnl with or without modifications, as long as this notice is preserved. |
| + |
| +dnl This program is distributed in the hope that it will be useful, |
| +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| +dnl PARTICULAR PURPOSE. |
| + |
| +dnl This provides configure definitions used by all the newlib |
| +dnl configure.in files. |
| + |
| +dnl Basic newlib configury. This calls basic introductory stuff, |
| +dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs |
| +dnl configure.host. The only argument is the relative path to the top |
| +dnl newlib directory. |
| + |
| +AC_DEFUN(NEWLIB_CONFIGURE, |
| +[ |
| +dnl Default to --enable-multilib |
| +AC_ARG_ENABLE(multilib, |
| +[ --enable-multilib build many library versions (default)], |
| +[case "${enableval}" in |
| + yes) multilib=yes ;; |
| + no) multilib=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; |
| + esac], [multilib=yes])dnl |
| + |
| +dnl Support --enable-target-optspace |
| +AC_ARG_ENABLE(target-optspace, |
| +[ --enable-target-optspace optimize for space], |
| +[case "${enableval}" in |
| + yes) target_optspace=yes ;; |
| + no) target_optspace=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; |
| + esac], [target_optspace=])dnl |
| + |
| +dnl Support --enable-malloc-debugging - currently only supported for Cygwin |
| +AC_ARG_ENABLE(malloc-debugging, |
| +[ --enable-malloc-debugging indicate malloc debugging requested], |
| +[case "${enableval}" in |
| + yes) malloc_debugging=yes ;; |
| + no) malloc_debugging=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; |
| + esac], [malloc_debugging=])dnl |
| + |
| +dnl Support --enable-newlib-multithread |
| +AC_ARG_ENABLE(newlib-multithread, |
| +[ --enable-newlib-multithread enable support for multiple threads], |
| +[case "${enableval}" in |
| + yes) newlib_multithread=yes ;; |
| + no) newlib_multithread=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; |
| + esac], [newlib_multithread=yes])dnl |
| + |
| +dnl Support --enable-newlib-iconv |
| +AC_ARG_ENABLE(newlib-iconv, |
| +[ --enable-newlib-iconv enable iconv library support], |
| +[if test "${newlib_iconv+set}" != set; then |
| + case "${enableval}" in |
| + yes) newlib_iconv=yes ;; |
| + no) newlib_iconv=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; |
| + esac |
| + fi], [newlib_iconv=${newlib_iconv}])dnl |
| + |
| +dnl Support --enable-newlib-elix-level |
| +AC_ARG_ENABLE(newlib-elix-level, |
| +[ --enable-newlib-elix-level supply desired elix library level (1-4)], |
| +[case "${enableval}" in |
| + 0) newlib_elix_level=0 ;; |
| + 1) newlib_elix_level=1 ;; |
| + 2) newlib_elix_level=2 ;; |
| + 3) newlib_elix_level=3 ;; |
| + 4) newlib_elix_level=4 ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; |
| + esac], [newlib_elix_level=0])dnl |
| + |
| +dnl Support --disable-newlib-io-float |
| +AC_ARG_ENABLE(newlib-io-float, |
| +[ --disable-newlib-io-float disable printf/scanf family float support], |
| +[case "${enableval}" in |
| + yes) newlib_io_float=yes ;; |
| + no) newlib_io_float=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; |
| + esac], [newlib_io_float=yes])dnl |
| + |
| +dnl Support --disable-newlib-supplied-syscalls |
| +AC_ARG_ENABLE(newlib-supplied-syscalls, |
| +[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], |
| +[case "${enableval}" in |
| + yes) newlib_may_supply_syscalls=yes ;; |
| + no) newlib_may_supply_syscalls=no ;; |
| + *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; |
| + esac], [newlib_may_supply_syscalls=yes])dnl |
| + |
| +AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) |
| + |
| +dnl We may get other options which we don't document: |
| +dnl --with-target-subdir, --with-multisrctop, --with-multisubdir |
| + |
| +test -z "[$]{with_target_subdir}" && with_target_subdir=. |
| + |
| +if test "[$]{srcdir}" = "."; then |
| + if test "[$]{with_target_subdir}" != "."; then |
| + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" |
| + else |
| + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" |
| + fi |
| +else |
| + newlib_basedir="[$]{srcdir}/$1" |
| +fi |
| +AC_SUBST(newlib_basedir) |
| + |
| +AC_CANONICAL_SYSTEM |
| + |
| +AM_INIT_AUTOMAKE(newlib, 1.14.0.atmel.1.0.1) |
| + |
| +# FIXME: We temporarily define our own version of AC_PROG_CC. This is |
| +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
| +# are probably using a cross compiler, which will not be able to fully |
| +# link an executable. This should really be fixed in autoconf |
| +# itself. |
| + |
| +AC_DEFUN(LIB_AC_PROG_CC, |
| +[AC_BEFORE([$0], [AC_PROG_CPP])dnl |
| +AC_CHECK_PROG(CC, gcc, gcc) |
| +if test -z "$CC"; then |
| + AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) |
| + test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) |
| +fi |
| + |
| +AC_PROG_CC_GNU |
| + |
| +if test $ac_cv_prog_gcc = yes; then |
| + GCC=yes |
| +dnl Check whether -g works, even if CFLAGS is set, in case the package |
| +dnl plays around with CFLAGS (such as to build both debugging and |
| +dnl normal versions of a library), tasteless as that idea is. |
| + ac_test_CFLAGS="${CFLAGS+set}" |
| + ac_save_CFLAGS="$CFLAGS" |
| + CFLAGS= |
| + AC_PROG_CC_G |
| + if test "$ac_test_CFLAGS" = set; then |
| + CFLAGS="$ac_save_CFLAGS" |
| + elif test $ac_cv_prog_cc_g = yes; then |
| + CFLAGS="-g -O2" |
| + else |
| + CFLAGS="-O2" |
| + fi |
| +else |
| + GCC= |
| + test "${CFLAGS+set}" = set || CFLAGS="-g" |
| +fi |
| +]) |
| + |
| +LIB_AC_PROG_CC |
| + |
| +AC_CHECK_TOOL(AS, as) |
| +AC_CHECK_TOOL(AR, ar) |
| +AC_CHECK_TOOL(RANLIB, ranlib, :) |
| + |
| +AC_PROG_INSTALL |
| + |
| +AM_MAINTAINER_MODE |
| + |
| +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, |
| +# at least currently, we never actually build a program, so we never |
| +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally |
| +# fails, because we are probably configuring with a cross compiler |
| +# which can't create executables. So we include AC_EXEEXT to keep |
| +# automake happy, but we don't execute it, since we don't care about |
| +# the result. |
| +if false; then |
| + AC_EXEEXT |
| +fi |
| + |
| +. [$]{newlib_basedir}/configure.host |
| + |
| +newlib_cflags="[$]{newlib_cflags} -fno-builtin" |
| + |
| +NEWLIB_CFLAGS=${newlib_cflags} |
| +AC_SUBST(NEWLIB_CFLAGS) |
| + |
| +LDFLAGS=${ldflags} |
| +AC_SUBST(LDFLAGS) |
| + |
| +AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) |
| +AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) |
| +AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) |
| +AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) |
| +AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) |
| + |
| +AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) |
| + |
| +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we |
| +# use oext, which is set in configure.host based on the target platform. |
| +OBJEXT=${oext} |
| + |
| +AC_SUBST(OBJEXT) |
| +AC_SUBST(oext) |
| +AC_SUBST(aext) |
| + |
| +AC_SUBST(libm_machine_dir) |
| +AC_SUBST(machine_dir) |
| +AC_SUBST(sys_dir) |
| +]) |
| + |
| +# Do all the work for Automake. This macro actually does too much -- |
| +# some checks are only needed if your package does certain things. |
| +# But this isn't really a big deal. |
| + |
| +# serial 1 |
| + |
| +dnl Usage: |
| +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) |
| + |
| +AC_DEFUN([AM_INIT_AUTOMAKE], |
| +[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl |
| +AC_REQUIRE([AC_PROG_INSTALL]) |
| +PACKAGE=[$1] |
| +AC_SUBST(PACKAGE) |
| +VERSION=[$2] |
| +AC_SUBST(VERSION) |
| +dnl test to see if srcdir already configured |
| +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then |
| + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) |
| +fi |
| +ifelse([$3],, |
| +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) |
| +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) |
| +AC_REQUIRE([AM_SANITY_CHECK]) |
| +AC_REQUIRE([AC_ARG_PROGRAM]) |
| +dnl FIXME This is truly gross. |
| +missing_dir=`cd $ac_aux_dir && pwd` |
| +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) |
| +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) |
| +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) |
| +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) |
| +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) |
| +AC_REQUIRE([AC_PROG_MAKE_SET])]) |
| + |
| +# Copyright 2002 Free Software Foundation, Inc. |
| + |
| +# This program is free software; you can redistribute it and/or modify |
| +# it under the terms of the GNU General Public License as published by |
| +# the Free Software Foundation; either version 2, or (at your option) |
| +# any later version. |
| + |
| +# This program is distributed in the hope that it will be useful, |
| +# but WITHOUT ANY WARRANTY; without even the implied warranty of |
| +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| +# GNU General Public License for more details. |
| + |
| +# You should have received a copy of the GNU General Public License |
| +# along with this program; if not, write to the Free Software |
| +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| + |
| +# AM_AUTOMAKE_VERSION(VERSION) |
| +# ---------------------------- |
| +# Automake X.Y traces this macro to ensure aclocal.m4 has been |
| +# generated from the m4 files accompanying Automake X.Y. |
| +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) |
| + |
| +# AM_SET_CURRENT_AUTOMAKE_VERSION |
| +# ------------------------------- |
| +# Call AM_AUTOMAKE_VERSION so it can be traced. |
| +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. |
| +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], |
| + [AM_AUTOMAKE_VERSION([1.4-p6])]) |
| + |
| +# |
| +# Check to make sure that the build environment is sane. |
| +# |
| + |
| +AC_DEFUN([AM_SANITY_CHECK], |
| +[AC_MSG_CHECKING([whether build environment is sane]) |
| +# Just in case |
| +sleep 1 |
| +echo timestamp > conftestfile |
| +# Do `set' in a subshell so we don't clobber the current shell's |
| +# arguments. Must try -L first in case configure is actually a |
| +# symlink; some systems play weird games with the mod time of symlinks |
| +# (eg FreeBSD returns the mod time of the symlink's containing |
| +# directory). |
| +if ( |
| + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` |
| + if test "[$]*" = "X"; then |
| + # -L didn't work. |
| + set X `ls -t $srcdir/configure conftestfile` |
| + fi |
| + if test "[$]*" != "X $srcdir/configure conftestfile" \ |
| + && test "[$]*" != "X conftestfile $srcdir/configure"; then |
| + |
| + # If neither matched, then we have a broken ls. This can happen |
| + # if, for instance, CONFIG_SHELL is bash and it inherits a |
| + # broken ls alias from the environment. This has actually |
| + # happened. Such a system could not be considered "sane". |
| + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken |
| +alias in your environment]) |
| + fi |
| + |
| + test "[$]2" = conftestfile |
| + ) |
| +then |
| + # Ok. |
| + : |
| +else |
| + AC_MSG_ERROR([newly created file is older than distributed files! |
| +Check your system clock]) |
| +fi |
| +rm -f conftest* |
| +AC_MSG_RESULT(yes)]) |
| + |
| +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) |
| +dnl The program must properly implement --version. |
| +AC_DEFUN([AM_MISSING_PROG], |
| +[AC_MSG_CHECKING(for working $2) |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if ($2 --version) < /dev/null > /dev/null 2>&1; then |
| + $1=$2 |
| + AC_MSG_RESULT(found) |
| +else |
| + $1="$3/missing $2" |
| + AC_MSG_RESULT(missing) |
| +fi |
| +AC_SUBST($1)]) |
| + |
| +# Define a conditional. |
| + |
| +AC_DEFUN([AM_CONDITIONAL], |
| +[AC_SUBST($1_TRUE) |
| +AC_SUBST($1_FALSE) |
| +if $2; then |
| + $1_TRUE= |
| + $1_FALSE='#' |
| +else |
| + $1_TRUE='#' |
| + $1_FALSE= |
| +fi]) |
| + |
| +# Add --enable-maintainer-mode option to configure. |
| +# From Jim Meyering |
| + |
| +# serial 1 |
| + |
| +AC_DEFUN([AM_MAINTAINER_MODE], |
| +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) |
| + dnl maintainer-mode is disabled by default |
| + AC_ARG_ENABLE(maintainer-mode, |
| +[ --enable-maintainer-mode enable make rules and dependencies not useful |
| + (and sometimes confusing) to the casual installer], |
| + USE_MAINTAINER_MODE=$enableval, |
| + USE_MAINTAINER_MODE=no) |
| + AC_MSG_RESULT($USE_MAINTAINER_MODE) |
| + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) |
| + MAINT=$MAINTAINER_MODE_TRUE |
| + AC_SUBST(MAINT)dnl |
| +] |
| +) |
| + |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h |
| --- newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1 @@ |
| + |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure newlib-1.17.0-new/newlib/libc/sys/avr32/configure |
| --- newlib-1.17.0/newlib/libc/sys/avr32/configure 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,3922 @@ |
| +#! /bin/sh |
| +# Guess values for system-dependent variables and create Makefiles. |
| +# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION. |
| +# |
| +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| +# This configure script is free software; the Free Software Foundation |
| +# gives unlimited permission to copy, distribute and modify it. |
| +## --------------------- ## |
| +## M4sh Initialization. ## |
| +## --------------------- ## |
| + |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| +fi |
| + |
| +# Support unset when possible. |
| +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| + as_unset=unset |
| +else |
| + as_unset=false |
| +fi |
| + |
| + |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| +# Work around bugs in pre-3.0 UWIN ksh. |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| +PS1='$ ' |
| +PS2='> ' |
| +PS4='+ ' |
| + |
| +# NLS nuisances. |
| +for as_var in \ |
| + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
| + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
| + LC_TELEPHONE LC_TIME |
| +do |
| + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| + eval $as_var=C; export $as_var |
| + else |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + fi |
| +done |
| + |
| +# Required to use basename. |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| + as_basename=basename |
| +else |
| + as_basename=false |
| +fi |
| + |
| + |
| +# Name of the executable. |
| +as_me=`$as_basename -- "$0" || |
| +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| + X"$0" : 'X\(//\)$' \| \ |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X/"$0" | |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + |
| +# CDPATH. |
| +$as_unset CDPATH |
| + |
| + |
| +if test "x$CONFIG_SHELL" = x; then |
| + if (eval ":") 2>/dev/null; then |
| + as_have_required=yes |
| +else |
| + as_have_required=no |
| +fi |
| + |
| + if test $as_have_required = yes && (eval ": |
| +(as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| + as_lineno_1=\$LINENO |
| + as_lineno_2=\$LINENO |
| + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && |
| + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } |
| +") 2> /dev/null; then |
| + : |
| +else |
| + as_candidate_shells= |
| + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + case $as_dir in |
| + /*) |
| + for as_base in sh bash ksh sh5; do |
| + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" |
| + done;; |
| + esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| + for as_shell in $as_candidate_shells $SHELL; do |
| + # Try only shells that exist, to save several forks. |
| + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && |
| + { ("$as_shell") 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +_ASEOF |
| +}; then |
| + CONFIG_SHELL=$as_shell |
| + as_have_required=yes |
| + if { "$as_shell" 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +(as_func_return () { |
| + (exit $1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = "$1" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test $exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } |
| + |
| +_ASEOF |
| +}; then |
| + break |
| +fi |
| + |
| +fi |
| + |
| + done |
| + |
| + if test "x$CONFIG_SHELL" != x; then |
| + for as_var in BASH_ENV ENV |
| + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + done |
| + export CONFIG_SHELL |
| + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} |
| +fi |
| + |
| + |
| + if test $as_have_required = no; then |
| + echo This script requires a shell more modern than all the |
| + echo shells that I found on your system. Please install a |
| + echo modern shell, or manually run the script under such a |
| + echo shell if you do have one. |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| + |
| +fi |
| + |
| +fi |
| + |
| + |
| + |
| +(eval "as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0") || { |
| + echo No shell found that supports shell functions. |
| + echo Please tell autoconf@gnu.org about your system, |
| + echo including any error possibly output before this |
| + echo message |
| +} |
| + |
| + |
| + |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| + |
| + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| + # uniformly replaced by the line number. The first 'sed' inserts a |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| + sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| + N |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| + t loop |
| + s/-\n.*// |
| + ' >$as_me.lineno && |
| + chmod +x "$as_me.lineno" || |
| + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + # Don't try to exec as it changes $[0], causing all sort of problems |
| + # (the dirname of $[0] is not the place where we might find the |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| + # Exit status is that of the last command. |
| + exit |
| +} |
| + |
| + |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| +esac |
| + |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| +echo >conf$$.file |
| +if ln -s conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| + as_ln_s='cp -p' |
| +elif ln conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s=ln |
| +else |
| + as_ln_s='cp -p' |
| +fi |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| + |
| +if mkdir -p . 2>/dev/null; then |
| + as_mkdir_p=: |
| +else |
| + test -d ./-p && rmdir ./-p |
| + as_mkdir_p=false |
| +fi |
| + |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| + |
| +# Sed expression to map a string onto a valid CPP name. |
| +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| +# Sed expression to map a string onto a valid variable name. |
| +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| + |
| + |
| +exec 7<&0 </dev/null 6>&1 |
| + |
| +# Name of the host. |
| +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, |
| +# so uname gets run too. |
| +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` |
| + |
| +# |
| +# Initializations. |
| +# |
| +ac_default_prefix=/usr/local |
| +ac_clean_files= |
| +ac_config_libobj_dir=. |
| +LIBOBJS= |
| +cross_compiling=no |
| +subdirs= |
| +MFLAGS= |
| +MAKEFLAGS= |
| +SHELL=${CONFIG_SHELL-/bin/sh} |
| + |
| +# Identity of this package. |
| +PACKAGE_NAME='newlib' |
| +PACKAGE_TARNAME='newlib' |
| +PACKAGE_VERSION='NEWLIB_VERSION' |
| +PACKAGE_STRING='newlib NEWLIB_VERSION' |
| +PACKAGE_BUGREPORT='' |
| + |
| +ac_subst_vars='SHELL |
| +PATH_SEPARATOR |
| +PACKAGE_NAME |
| +PACKAGE_TARNAME |
| +PACKAGE_VERSION |
| +PACKAGE_STRING |
| +PACKAGE_BUGREPORT |
| +exec_prefix |
| +prefix |
| +program_transform_name |
| +bindir |
| +sbindir |
| +libexecdir |
| +datarootdir |
| +datadir |
| +sysconfdir |
| +sharedstatedir |
| +localstatedir |
| +includedir |
| +oldincludedir |
| +docdir |
| +infodir |
| +htmldir |
| +dvidir |
| +pdfdir |
| +psdir |
| +libdir |
| +localedir |
| +mandir |
| +DEFS |
| +ECHO_C |
| +ECHO_N |
| +ECHO_T |
| +LIBS |
| +build_alias |
| +host_alias |
| +target_alias |
| +MAY_SUPPLY_SYSCALLS_TRUE |
| +MAY_SUPPLY_SYSCALLS_FALSE |
| +newlib_basedir |
| +build |
| +build_cpu |
| +build_vendor |
| +build_os |
| +host |
| +host_cpu |
| +host_vendor |
| +host_os |
| +target |
| +target_cpu |
| +target_vendor |
| +target_os |
| +INSTALL_PROGRAM |
| +INSTALL_SCRIPT |
| +INSTALL_DATA |
| +PACKAGE |
| +VERSION |
| +ACLOCAL |
| +AUTOCONF |
| +AUTOMAKE |
| +AUTOHEADER |
| +MAKEINFO |
| +SET_MAKE |
| +CC |
| +AS |
| +AR |
| +RANLIB |
| +MAINTAINER_MODE_TRUE |
| +MAINTAINER_MODE_FALSE |
| +MAINT |
| +NEWLIB_CFLAGS |
| +LDFLAGS |
| +ELIX_LEVEL_0_TRUE |
| +ELIX_LEVEL_0_FALSE |
| +ELIX_LEVEL_1_TRUE |
| +ELIX_LEVEL_1_FALSE |
| +ELIX_LEVEL_2_TRUE |
| +ELIX_LEVEL_2_FALSE |
| +ELIX_LEVEL_3_TRUE |
| +ELIX_LEVEL_3_FALSE |
| +ELIX_LEVEL_4_TRUE |
| +ELIX_LEVEL_4_FALSE |
| +USE_LIBTOOL_TRUE |
| +USE_LIBTOOL_FALSE |
| +OBJEXT |
| +oext |
| +aext |
| +libm_machine_dir |
| +machine_dir |
| +sys_dir |
| +LIBOBJS |
| +LTLIBOBJS' |
| +ac_subst_files='' |
| + ac_precious_vars='build_alias |
| +host_alias |
| +target_alias' |
| + |
| + |
| +# Initialize some variables set by options. |
| +ac_init_help= |
| +ac_init_version=false |
| +# The variables have the same names as the options, with |
| +# dashes changed to underlines. |
| +cache_file=/dev/null |
| +exec_prefix=NONE |
| +no_create= |
| +no_recursion= |
| +prefix=NONE |
| +program_prefix=NONE |
| +program_suffix=NONE |
| +program_transform_name=s,x,x, |
| +silent= |
| +site= |
| +srcdir= |
| +verbose= |
| +x_includes=NONE |
| +x_libraries=NONE |
| + |
| +# Installation directory options. |
| +# These are left unexpanded so users can "make install exec_prefix=/foo" |
| +# and all the variables that are supposed to be based on exec_prefix |
| +# by default will actually change. |
| +# Use braces instead of parens because sh, perl, etc. also accept them. |
| +# (The list follows the same order as the GNU Coding Standards.) |
| +bindir='${exec_prefix}/bin' |
| +sbindir='${exec_prefix}/sbin' |
| +libexecdir='${exec_prefix}/libexec' |
| +datarootdir='${prefix}/share' |
| +datadir='${datarootdir}' |
| +sysconfdir='${prefix}/etc' |
| +sharedstatedir='${prefix}/com' |
| +localstatedir='${prefix}/var' |
| +includedir='${prefix}/include' |
| +oldincludedir='/usr/include' |
| +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' |
| +infodir='${datarootdir}/info' |
| +htmldir='${docdir}' |
| +dvidir='${docdir}' |
| +pdfdir='${docdir}' |
| +psdir='${docdir}' |
| +libdir='${exec_prefix}/lib' |
| +localedir='${datarootdir}/locale' |
| +mandir='${datarootdir}/man' |
| + |
| +ac_prev= |
| +ac_dashdash= |
| +for ac_option |
| +do |
| + # If the previous option needs an argument, assign it. |
| + if test -n "$ac_prev"; then |
| + eval $ac_prev=\$ac_option |
| + ac_prev= |
| + continue |
| + fi |
| + |
| + case $ac_option in |
| + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; |
| + *) ac_optarg=yes ;; |
| + esac |
| + |
| + # Accept the important Cygnus configure options, so we can diagnose typos. |
| + |
| + case $ac_dashdash$ac_option in |
| + --) |
| + ac_dashdash=yes ;; |
| + |
| + -bindir | --bindir | --bindi | --bind | --bin | --bi) |
| + ac_prev=bindir ;; |
| + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
| + bindir=$ac_optarg ;; |
| + |
| + -build | --build | --buil | --bui | --bu) |
| + ac_prev=build_alias ;; |
| + -build=* | --build=* | --buil=* | --bui=* | --bu=*) |
| + build_alias=$ac_optarg ;; |
| + |
| + -cache-file | --cache-file | --cache-fil | --cache-fi \ |
| + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
| + ac_prev=cache_file ;; |
| + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
| + cache_file=$ac_optarg ;; |
| + |
| + --config-cache | -C) |
| + cache_file=config.cache ;; |
| + |
| + -datadir | --datadir | --datadi | --datad) |
| + ac_prev=datadir ;; |
| + -datadir=* | --datadir=* | --datadi=* | --datad=*) |
| + datadir=$ac_optarg ;; |
| + |
| + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ |
| + | --dataroo | --dataro | --datar) |
| + ac_prev=datarootdir ;; |
| + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ |
| + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) |
| + datarootdir=$ac_optarg ;; |
| + |
| + -disable-* | --disable-*) |
| + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=no ;; |
| + |
| + -docdir | --docdir | --docdi | --doc | --do) |
| + ac_prev=docdir ;; |
| + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) |
| + docdir=$ac_optarg ;; |
| + |
| + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) |
| + ac_prev=dvidir ;; |
| + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) |
| + dvidir=$ac_optarg ;; |
| + |
| + -enable-* | --enable-*) |
| + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=\$ac_optarg ;; |
| + |
| + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| + | --exec | --exe | --ex) |
| + ac_prev=exec_prefix ;; |
| + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| + | --exec=* | --exe=* | --ex=*) |
| + exec_prefix=$ac_optarg ;; |
| + |
| + -gas | --gas | --ga | --g) |
| + # Obsolete; use --with-gas. |
| + with_gas=yes ;; |
| + |
| + -help | --help | --hel | --he | -h) |
| + ac_init_help=long ;; |
| + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) |
| + ac_init_help=recursive ;; |
| + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) |
| + ac_init_help=short ;; |
| + |
| + -host | --host | --hos | --ho) |
| + ac_prev=host_alias ;; |
| + -host=* | --host=* | --hos=* | --ho=*) |
| + host_alias=$ac_optarg ;; |
| + |
| + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) |
| + ac_prev=htmldir ;; |
| + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ |
| + | --ht=*) |
| + htmldir=$ac_optarg ;; |
| + |
| + -includedir | --includedir | --includedi | --included | --include \ |
| + | --includ | --inclu | --incl | --inc) |
| + ac_prev=includedir ;; |
| + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| + | --includ=* | --inclu=* | --incl=* | --inc=*) |
| + includedir=$ac_optarg ;; |
| + |
| + -infodir | --infodir | --infodi | --infod | --info | --inf) |
| + ac_prev=infodir ;; |
| + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
| + infodir=$ac_optarg ;; |
| + |
| + -libdir | --libdir | --libdi | --libd) |
| + ac_prev=libdir ;; |
| + -libdir=* | --libdir=* | --libdi=* | --libd=*) |
| + libdir=$ac_optarg ;; |
| + |
| + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| + | --libexe | --libex | --libe) |
| + ac_prev=libexecdir ;; |
| + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| + | --libexe=* | --libex=* | --libe=*) |
| + libexecdir=$ac_optarg ;; |
| + |
| + -localedir | --localedir | --localedi | --localed | --locale) |
| + ac_prev=localedir ;; |
| + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) |
| + localedir=$ac_optarg ;; |
| + |
| + -localstatedir | --localstatedir | --localstatedi | --localstated \ |
| + | --localstate | --localstat | --localsta | --localst | --locals) |
| + ac_prev=localstatedir ;; |
| + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) |
| + localstatedir=$ac_optarg ;; |
| + |
| + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
| + ac_prev=mandir ;; |
| + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
| + mandir=$ac_optarg ;; |
| + |
| + -nfp | --nfp | --nf) |
| + # Obsolete; use --without-fp. |
| + with_fp=no ;; |
| + |
| + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| + | --no-cr | --no-c | -n) |
| + no_create=yes ;; |
| + |
| + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
| + no_recursion=yes ;; |
| + |
| + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| + | --oldin | --oldi | --old | --ol | --o) |
| + ac_prev=oldincludedir ;; |
| + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
| + oldincludedir=$ac_optarg ;; |
| + |
| + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
| + ac_prev=prefix ;; |
| + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
| + prefix=$ac_optarg ;; |
| + |
| + -program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| + | --program-pre | --program-pr | --program-p) |
| + ac_prev=program_prefix ;; |
| + -program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
| + program_prefix=$ac_optarg ;; |
| + |
| + -program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| + | --program-suf | --program-su | --program-s) |
| + ac_prev=program_suffix ;; |
| + -program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
| + program_suffix=$ac_optarg ;; |
| + |
| + -program-transform-name | --program-transform-name \ |
| + | --program-transform-nam | --program-transform-na \ |
| + | --program-transform-n | --program-transform- \ |
| + | --program-transform | --program-transfor \ |
| + | --program-transfo | --program-transf \ |
| + | --program-trans | --program-tran \ |
| + | --progr-tra | --program-tr | --program-t) |
| + ac_prev=program_transform_name ;; |
| + -program-transform-name=* | --program-transform-name=* \ |
| + | --program-transform-nam=* | --program-transform-na=* \ |
| + | --program-transform-n=* | --program-transform-=* \ |
| + | --program-transform=* | --program-transfor=* \ |
| + | --program-transfo=* | --program-transf=* \ |
| + | --program-trans=* | --program-tran=* \ |
| + | --progr-tra=* | --program-tr=* | --program-t=*) |
| + program_transform_name=$ac_optarg ;; |
| + |
| + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) |
| + ac_prev=pdfdir ;; |
| + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) |
| + pdfdir=$ac_optarg ;; |
| + |
| + -psdir | --psdir | --psdi | --psd | --ps) |
| + ac_prev=psdir ;; |
| + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) |
| + psdir=$ac_optarg ;; |
| + |
| + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| + | -silent | --silent | --silen | --sile | --sil) |
| + silent=yes ;; |
| + |
| + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
| + ac_prev=sbindir ;; |
| + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| + | --sbi=* | --sb=*) |
| + sbindir=$ac_optarg ;; |
| + |
| + -sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| + | --sharedst | --shareds | --shared | --share | --shar \ |
| + | --sha | --sh) |
| + ac_prev=sharedstatedir ;; |
| + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| + | --sha=* | --sh=*) |
| + sharedstatedir=$ac_optarg ;; |
| + |
| + -site | --site | --sit) |
| + ac_prev=site ;; |
| + -site=* | --site=* | --sit=*) |
| + site=$ac_optarg ;; |
| + |
| + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
| + ac_prev=srcdir ;; |
| + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
| + srcdir=$ac_optarg ;; |
| + |
| + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| + | --syscon | --sysco | --sysc | --sys | --sy) |
| + ac_prev=sysconfdir ;; |
| + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
| + sysconfdir=$ac_optarg ;; |
| + |
| + -target | --target | --targe | --targ | --tar | --ta | --t) |
| + ac_prev=target_alias ;; |
| + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
| + target_alias=$ac_optarg ;; |
| + |
| + -v | -verbose | --verbose | --verbos | --verbo | --verb) |
| + verbose=yes ;; |
| + |
| + -version | --version | --versio | --versi | --vers | -V) |
| + ac_init_version=: ;; |
| + |
| + -with-* | --with-*) |
| + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=\$ac_optarg ;; |
| + |
| + -without-* | --without-*) |
| + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| + { (exit 1); exit 1; }; } |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=no ;; |
| + |
| + --x) |
| + # Obsolete; use --with-x. |
| + with_x=yes ;; |
| + |
| + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| + | --x-incl | --x-inc | --x-in | --x-i) |
| + ac_prev=x_includes ;; |
| + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
| + x_includes=$ac_optarg ;; |
| + |
| + -x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
| + ac_prev=x_libraries ;; |
| + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
| + x_libraries=$ac_optarg ;; |
| + |
| + -*) { echo "$as_me: error: unrecognized option: $ac_option |
| +Try \`$0 --help' for more information." >&2 |
| + { (exit 1); exit 1; }; } |
| + ;; |
| + |
| + *=*) |
| + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` |
| + # Reject names that are not valid shell variable names. |
| + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && |
| + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 |
| + { (exit 1); exit 1; }; } |
| + eval $ac_envvar=\$ac_optarg |
| + export $ac_envvar ;; |
| + |
| + *) |
| + # FIXME: should be removed in autoconf 3.0. |
| + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 |
| + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 |
| + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} |
| + ;; |
| + |
| + esac |
| +done |
| + |
| +if test -n "$ac_prev"; then |
| + ac_option=--`echo $ac_prev | sed 's/_/-/g'` |
| + { echo "$as_me: error: missing argument to $ac_option" >&2 |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +# Be sure to have absolute directory names. |
| +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ |
| + datadir sysconfdir sharedstatedir localstatedir includedir \ |
| + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ |
| + libdir localedir mandir |
| +do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + [\\/$]* | ?:[\\/]* ) continue;; |
| + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; |
| + esac |
| + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| + { (exit 1); exit 1; }; } |
| +done |
| + |
| +# There might be people who depend on the old broken behavior: `$host' |
| +# used to hold the argument of --host etc. |
| +# FIXME: To remove some day. |
| +build=$build_alias |
| +host=$host_alias |
| +target=$target_alias |
| + |
| +# FIXME: To remove some day. |
| +if test "x$host_alias" != x; then |
| + if test "x$build_alias" = x; then |
| + cross_compiling=maybe |
| + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. |
| + If a cross compiler is detected then cross compile mode will be used." >&2 |
| + elif test "x$build_alias" != "x$host_alias"; then |
| + cross_compiling=yes |
| + fi |
| +fi |
| + |
| +ac_tool_prefix= |
| +test -n "$host_alias" && ac_tool_prefix=$host_alias- |
| + |
| +test "$silent" = yes && exec 6>/dev/null |
| + |
| + |
| +ac_pwd=`pwd` && test -n "$ac_pwd" && |
| +ac_ls_di=`ls -di .` && |
| +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || |
| + { echo "$as_me: error: Working directory cannot be determined" >&2 |
| + { (exit 1); exit 1; }; } |
| +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || |
| + { echo "$as_me: error: pwd does not report name of working directory" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + |
| +# Find the source files, if location was not specified. |
| +if test -z "$srcdir"; then |
| + ac_srcdir_defaulted=yes |
| + # Try the directory containing this script, then the parent directory. |
| + ac_confdir=`$as_dirname -- "$0" || |
| +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| + X"$0" : 'X\(//\)[^/]' \| \ |
| + X"$0" : 'X\(//\)$' \| \ |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X"$0" | |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + srcdir=$ac_confdir |
| + if test ! -r "$srcdir/$ac_unique_file"; then |
| + srcdir=.. |
| + fi |
| +else |
| + ac_srcdir_defaulted=no |
| +fi |
| +if test ! -r "$srcdir/$ac_unique_file"; then |
| + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." |
| + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
| + { (exit 1); exit 1; }; } |
| +fi |
| +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" |
| +ac_abs_confdir=`( |
| + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 |
| + { (exit 1); exit 1; }; } |
| + pwd)` |
| +# When building in place, set srcdir=. |
| +if test "$ac_abs_confdir" = "$ac_pwd"; then |
| + srcdir=. |
| +fi |
| +# Remove unnecessary trailing slashes from srcdir. |
| +# Double slashes in file names in object file debugging info |
| +# mess up M-x gdb in Emacs. |
| +case $srcdir in |
| +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; |
| +esac |
| +for ac_var in $ac_precious_vars; do |
| + eval ac_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_env_${ac_var}_value=\$${ac_var} |
| + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_cv_env_${ac_var}_value=\$${ac_var} |
| +done |
| + |
| +# |
| +# Report the --help message. |
| +# |
| +if test "$ac_init_help" = "long"; then |
| + # Omit some internal or obsolete options to make the list less imposing. |
| + # This message is too long to be a string in the A/UX 3.1 sh. |
| + cat <<_ACEOF |
| +\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems. |
| + |
| +Usage: $0 [OPTION]... [VAR=VALUE]... |
| + |
| +To assign environment variables (e.g., CC, CFLAGS...), specify them as |
| +VAR=VALUE. See below for descriptions of some of the useful variables. |
| + |
| +Defaults for the options are specified in brackets. |
| + |
| +Configuration: |
| + -h, --help display this help and exit |
| + --help=short display options specific to this package |
| + --help=recursive display the short help of all the included packages |
| + -V, --version display version information and exit |
| + -q, --quiet, --silent do not print \`checking...' messages |
| + --cache-file=FILE cache test results in FILE [disabled] |
| + -C, --config-cache alias for \`--cache-file=config.cache' |
| + -n, --no-create do not create output files |
| + --srcdir=DIR find the sources in DIR [configure dir or \`..'] |
| + |
| +Installation directories: |
| + --prefix=PREFIX install architecture-independent files in PREFIX |
| + [$ac_default_prefix] |
| + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
| + [PREFIX] |
| + |
| +By default, \`make install' will install all the files in |
| +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify |
| +an installation prefix other than \`$ac_default_prefix' using \`--prefix', |
| +for instance \`--prefix=\$HOME'. |
| + |
| +For better control, use the options below. |
| + |
| +Fine tuning of the installation directories: |
| + --bindir=DIR user executables [EPREFIX/bin] |
| + --sbindir=DIR system admin executables [EPREFIX/sbin] |
| + --libexecdir=DIR program executables [EPREFIX/libexec] |
| + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
| + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
| + --localstatedir=DIR modifiable single-machine data [PREFIX/var] |
| + --libdir=DIR object code libraries [EPREFIX/lib] |
| + --includedir=DIR C header files [PREFIX/include] |
| + --oldincludedir=DIR C header files for non-gcc [/usr/include] |
| + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] |
| + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] |
| + --infodir=DIR info documentation [DATAROOTDIR/info] |
| + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] |
| + --mandir=DIR man documentation [DATAROOTDIR/man] |
| + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] |
| + --htmldir=DIR html documentation [DOCDIR] |
| + --dvidir=DIR dvi documentation [DOCDIR] |
| + --pdfdir=DIR pdf documentation [DOCDIR] |
| + --psdir=DIR ps documentation [DOCDIR] |
| +_ACEOF |
| + |
| + cat <<\_ACEOF |
| + |
| +Program names: |
| + --program-prefix=PREFIX prepend PREFIX to installed program names |
| + --program-suffix=SUFFIX append SUFFIX to installed program names |
| + --program-transform-name=PROGRAM run sed PROGRAM on installed program names |
| + |
| +System types: |
| + --build=BUILD configure for building on BUILD [guessed] |
| + --host=HOST cross-compile to build programs to run on HOST [BUILD] |
| + --target=TARGET configure for building compilers for TARGET [HOST] |
| +_ACEOF |
| +fi |
| + |
| +if test -n "$ac_init_help"; then |
| + case $ac_init_help in |
| + short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";; |
| + esac |
| + cat <<\_ACEOF |
| + |
| +Optional Features: |
| + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
| + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
| + --enable-multilib build many library versions (default) |
| + --enable-target-optspace optimize for space |
| + --enable-malloc-debugging indicate malloc debugging requested |
| + --enable-newlib-multithread enable support for multiple threads |
| + --enable-newlib-iconv enable iconv library support |
| + --enable-newlib-elix-level supply desired elix library level (1-4) |
| + --disable-newlib-io-float disable printf/scanf family float support |
| + --disable-newlib-supplied-syscalls disable newlib from supplying syscalls |
| + --enable-maintainer-mode enable make rules and dependencies not useful |
| + (and sometimes confusing) to the casual installer |
| + |
| +_ACEOF |
| +ac_status=$? |
| +fi |
| + |
| +if test "$ac_init_help" = "recursive"; then |
| + # If there are subdirs, report their specific --help. |
| + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue |
| + test -d "$ac_dir" || continue |
| + ac_builddir=. |
| + |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| + |
| +case $srcdir in |
| + .) # We are building in place. |
| + ac_srcdir=. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| + ac_srcdir=$srcdir$ac_dir_suffix; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| +esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| + |
| + cd "$ac_dir" || { ac_status=$?; continue; } |
| + # Check for guested configure. |
| + if test -f "$ac_srcdir/configure.gnu"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure.gnu" --help=recursive |
| + elif test -f "$ac_srcdir/configure"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure" --help=recursive |
| + else |
| + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 |
| + fi || ac_status=$? |
| + cd "$ac_pwd" || { ac_status=$?; break; } |
| + done |
| +fi |
| + |
| +test -n "$ac_init_help" && exit $ac_status |
| +if $ac_init_version; then |
| + cat <<\_ACEOF |
| +newlib configure NEWLIB_VERSION |
| +generated by GNU Autoconf 2.61 |
| + |
| +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| +This configure script is free software; the Free Software Foundation |
| +gives unlimited permission to copy, distribute and modify it. |
| +_ACEOF |
| + exit |
| +fi |
| +cat >config.log <<_ACEOF |
| +This file contains any messages produced by compilers while |
| +running configure, to aid debugging if configure makes a mistake. |
| + |
| +It was created by newlib $as_me NEWLIB_VERSION, which was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| + |
| + $ $0 $@ |
| + |
| +_ACEOF |
| +exec 5>>config.log |
| +{ |
| +cat <<_ASUNAME |
| +## --------- ## |
| +## Platform. ## |
| +## --------- ## |
| + |
| +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` |
| +uname -m = `(uname -m) 2>/dev/null || echo unknown` |
| +uname -r = `(uname -r) 2>/dev/null || echo unknown` |
| +uname -s = `(uname -s) 2>/dev/null || echo unknown` |
| +uname -v = `(uname -v) 2>/dev/null || echo unknown` |
| + |
| +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` |
| +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` |
| + |
| +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` |
| +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` |
| +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` |
| +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` |
| +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` |
| +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` |
| +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` |
| + |
| +_ASUNAME |
| + |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + echo "PATH: $as_dir" |
| +done |
| +IFS=$as_save_IFS |
| + |
| +} >&5 |
| + |
| +cat >&5 <<_ACEOF |
| + |
| + |
| +## ----------- ## |
| +## Core tests. ## |
| +## ----------- ## |
| + |
| +_ACEOF |
| + |
| + |
| +# Keep a trace of the command line. |
| +# Strip out --no-create and --no-recursion so they do not pile up. |
| +# Strip out --silent because we don't want to record it for future runs. |
| +# Also quote any args containing shell meta-characters. |
| +# Make two passes to allow for proper duplicate-argument suppression. |
| +ac_configure_args= |
| +ac_configure_args0= |
| +ac_configure_args1= |
| +ac_must_keep_next=false |
| +for ac_pass in 1 2 |
| +do |
| + for ac_arg |
| + do |
| + case $ac_arg in |
| + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; |
| + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| + | -silent | --silent | --silen | --sile | --sil) |
| + continue ;; |
| + *\'*) |
| + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| + esac |
| + case $ac_pass in |
| + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; |
| + 2) |
| + ac_configure_args1="$ac_configure_args1 '$ac_arg'" |
| + if test $ac_must_keep_next = true; then |
| + ac_must_keep_next=false # Got value, back to normal. |
| + else |
| + case $ac_arg in |
| + *=* | --config-cache | -C | -disable-* | --disable-* \ |
| + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ |
| + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ |
| + | -with-* | --with-* | -without-* | --without-* | --x) |
| + case "$ac_configure_args0 " in |
| + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; |
| + esac |
| + ;; |
| + -* ) ac_must_keep_next=true ;; |
| + esac |
| + fi |
| + ac_configure_args="$ac_configure_args '$ac_arg'" |
| + ;; |
| + esac |
| + done |
| +done |
| +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } |
| +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } |
| + |
| +# When interrupted or exit'd, cleanup temporary files, and complete |
| +# config.log. We remove comments because anyway the quotes in there |
| +# would cause problems or look ugly. |
| +# WARNING: Use '\'' to represent an apostrophe within the trap. |
| +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. |
| +trap 'exit_status=$? |
| + # Save into config.log some information that might help in debugging. |
| + { |
| + echo |
| + |
| + cat <<\_ASBOX |
| +## ---------------- ## |
| +## Cache variables. ## |
| +## ---------------- ## |
| +_ASBOX |
| + echo |
| + # The following way of writing the cache mishandles newlines in values, |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| + (set) 2>&1 | |
| + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| + sed -n \ |
| + "s/'\''/'\''\\\\'\'''\''/g; |
| + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" |
| + ;; #( |
| + *) |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| + ;; |
| + esac | |
| + sort |
| +) |
| + echo |
| + |
| + cat <<\_ASBOX |
| +## ----------------- ## |
| +## Output variables. ## |
| +## ----------------- ## |
| +_ASBOX |
| + echo |
| + for ac_var in $ac_subst_vars |
| + do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| + done | sort |
| + echo |
| + |
| + if test -n "$ac_subst_files"; then |
| + cat <<\_ASBOX |
| +## ------------------- ## |
| +## File substitutions. ## |
| +## ------------------- ## |
| +_ASBOX |
| + echo |
| + for ac_var in $ac_subst_files |
| + do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| + done | sort |
| + echo |
| + fi |
| + |
| + if test -s confdefs.h; then |
| + cat <<\_ASBOX |
| +## ----------- ## |
| +## confdefs.h. ## |
| +## ----------- ## |
| +_ASBOX |
| + echo |
| + cat confdefs.h |
| + echo |
| + fi |
| + test "$ac_signal" != 0 && |
| + echo "$as_me: caught signal $ac_signal" |
| + echo "$as_me: exit $exit_status" |
| + } >&5 |
| + rm -f core *.core core.conftest.* && |
| + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && |
| + exit $exit_status |
| +' 0 |
| +for ac_signal in 1 2 13 15; do |
| + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal |
| +done |
| +ac_signal=0 |
| + |
| +# confdefs.h avoids OS command line length limits that DEFS can exceed. |
| +rm -f -r conftest* confdefs.h |
| + |
| +# Predefined preprocessor variables. |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_NAME "$PACKAGE_NAME" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_VERSION "$PACKAGE_VERSION" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_STRING "$PACKAGE_STRING" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" |
| +_ACEOF |
| + |
| + |
| +# Let the site file select an alternate cache file if it wants to. |
| +# Prefer explicitly selected file to automatically selected ones. |
| +if test -n "$CONFIG_SITE"; then |
| + set x "$CONFIG_SITE" |
| +elif test "x$prefix" != xNONE; then |
| + set x "$prefix/share/config.site" "$prefix/etc/config.site" |
| +else |
| + set x "$ac_default_prefix/share/config.site" \ |
| + "$ac_default_prefix/etc/config.site" |
| +fi |
| +shift |
| +for ac_site_file |
| +do |
| + if test -r "$ac_site_file"; then |
| + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 |
| +echo "$as_me: loading site script $ac_site_file" >&6;} |
| + sed 's/^/| /' "$ac_site_file" >&5 |
| + . "$ac_site_file" |
| + fi |
| +done |
| + |
| +if test -r "$cache_file"; then |
| + # Some versions of bash will fail to source /dev/null (special |
| + # files actually), so we avoid doing that. |
| + if test -f "$cache_file"; then |
| + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 |
| +echo "$as_me: loading cache $cache_file" >&6;} |
| + case $cache_file in |
| + [\\/]* | ?:[\\/]* ) . "$cache_file";; |
| + *) . "./$cache_file";; |
| + esac |
| + fi |
| +else |
| + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 |
| +echo "$as_me: creating cache $cache_file" >&6;} |
| + >$cache_file |
| +fi |
| + |
| +# Check that the precious variables saved in the cache have kept the same |
| +# value. |
| +ac_cache_corrupted=false |
| +for ac_var in $ac_precious_vars; do |
| + eval ac_old_set=\$ac_cv_env_${ac_var}_set |
| + eval ac_new_set=\$ac_env_${ac_var}_set |
| + eval ac_old_val=\$ac_cv_env_${ac_var}_value |
| + eval ac_new_val=\$ac_env_${ac_var}_value |
| + case $ac_old_set,$ac_new_set in |
| + set,) |
| + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 |
| +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} |
| + ac_cache_corrupted=: ;; |
| + ,set) |
| + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 |
| +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} |
| + ac_cache_corrupted=: ;; |
| + ,);; |
| + *) |
| + if test "x$ac_old_val" != "x$ac_new_val"; then |
| + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 |
| +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} |
| + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 |
| +echo "$as_me: former value: $ac_old_val" >&2;} |
| + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 |
| +echo "$as_me: current value: $ac_new_val" >&2;} |
| + ac_cache_corrupted=: |
| + fi;; |
| + esac |
| + # Pass precious variables to config.status. |
| + if test "$ac_new_set" = set; then |
| + case $ac_new_val in |
| + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
| + *) ac_arg=$ac_var=$ac_new_val ;; |
| + esac |
| + case " $ac_configure_args " in |
| + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. |
| + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
| + esac |
| + fi |
| +done |
| +if $ac_cache_corrupted; then |
| + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 |
| +echo "$as_me: error: changes in the environment can compromise the build" >&2;} |
| + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 |
| +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| +ac_ext=c |
| +ac_cpp='$CPP $CPPFLAGS' |
| +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| +ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| + |
| + |
| + |
| +ac_aux_dir= |
| +for ac_dir in ../../../.. "$srcdir"/../../../..; do |
| + if test -f "$ac_dir/install-sh"; then |
| + ac_aux_dir=$ac_dir |
| + ac_install_sh="$ac_aux_dir/install-sh -c" |
| + break |
| + elif test -f "$ac_dir/install.sh"; then |
| + ac_aux_dir=$ac_dir |
| + ac_install_sh="$ac_aux_dir/install.sh -c" |
| + break |
| + elif test -f "$ac_dir/shtool"; then |
| + ac_aux_dir=$ac_dir |
| + ac_install_sh="$ac_aux_dir/shtool install -c" |
| + break |
| + fi |
| +done |
| +if test -z "$ac_aux_dir"; then |
| + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5 |
| +echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +# These three variables are undocumented and unsupported, |
| +# and are intended to be withdrawn in a future Autoconf release. |
| +# They can cause serious problems if a builder's source tree is in a directory |
| +# whose full name contains unusual characters. |
| +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. |
| +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. |
| +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. |
| + |
| + |
| + |
| +# Make sure we can run config.sub. |
| +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || |
| + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 |
| +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} |
| + { (exit 1); exit 1; }; } |
| + |
| +{ echo "$as_me:$LINENO: checking build system type" >&5 |
| +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } |
| +if test "${ac_cv_build+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_build_alias=$build_alias |
| +test "x$ac_build_alias" = x && |
| + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` |
| +test "x$ac_build_alias" = x && |
| + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 |
| +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} |
| + { (exit 1); exit 1; }; } |
| +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} |
| + { (exit 1); exit 1; }; } |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
| +echo "${ECHO_T}$ac_cv_build" >&6; } |
| +case $ac_cv_build in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 |
| +echo "$as_me: error: invalid value of canonical build" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| +build=$ac_cv_build |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_build |
| +shift |
| +build_cpu=$1 |
| +build_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +build_os=$* |
| +IFS=$ac_save_IFS |
| +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking host system type" >&5 |
| +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } |
| +if test "${ac_cv_host+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test "x$host_alias" = x; then |
| + ac_cv_host=$ac_cv_build |
| +else |
| + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
| +echo "${ECHO_T}$ac_cv_host" >&6; } |
| +case $ac_cv_host in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 |
| +echo "$as_me: error: invalid value of canonical host" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| +host=$ac_cv_host |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_host |
| +shift |
| +host_cpu=$1 |
| +host_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +host_os=$* |
| +IFS=$ac_save_IFS |
| +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac |
| + |
| + |
| +am__api_version="1.4" |
| +# Find a good install program. We prefer a C program (faster), |
| +# so one script is as good as another. But avoid the broken or |
| +# incompatible versions: |
| +# SysV /etc/install, /usr/sbin/install |
| +# SunOS /usr/etc/install |
| +# IRIX /sbin/install |
| +# AIX /bin/install |
| +# AmigaOS /C/install, which installs bootblocks on floppy discs |
| +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
| +# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
| +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| +# OS/2's system install, which has a completely different semantic |
| +# ./install, which can be erroneously created by make from ./install.sh. |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| +if test -z "$INSTALL"; then |
| +if test "${ac_cv_path_install+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + # Account for people who put trailing slashes in PATH elements. |
| +case $as_dir/ in |
| + ./ | .// | /cC/* | \ |
| + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
| + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ |
| + /usr/ucb/* ) ;; |
| + *) |
| + # OSF1 and SCO ODT 3.0 have their own names for install. |
| + # Don't use installbsd from OSF since it installs stuff as root |
| + # by default. |
| + for ac_prog in ginstall scoinst install; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| + if test $ac_prog = install && |
| + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # AIX install. It has an incompatible calling convention. |
| + : |
| + elif test $ac_prog = install && |
| + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # program-specific install script used by HP pwplus--don't use. |
| + : |
| + else |
| + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
| + break 3 |
| + fi |
| + fi |
| + done |
| + done |
| + ;; |
| +esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + if test "${ac_cv_path_install+set}" = set; then |
| + INSTALL=$ac_cv_path_install |
| + else |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| + # break other packages using the cache if that directory is |
| + # removed, or if the value is a relative name. |
| + INSTALL=$ac_install_sh |
| + fi |
| +fi |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| + |
| +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| +# It thinks the first close brace ends the variable substitution. |
| +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
| + |
| +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
| + |
| +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
| + |
| +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
| +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } |
| +# Just in case |
| +sleep 1 |
| +echo timestamp > conftestfile |
| +# Do `set' in a subshell so we don't clobber the current shell's |
| +# arguments. Must try -L first in case configure is actually a |
| +# symlink; some systems play weird games with the mod time of symlinks |
| +# (eg FreeBSD returns the mod time of the symlink's containing |
| +# directory). |
| +if ( |
| + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` |
| + if test "$*" = "X"; then |
| + # -L didn't work. |
| + set X `ls -t $srcdir/configure conftestfile` |
| + fi |
| + if test "$*" != "X $srcdir/configure conftestfile" \ |
| + && test "$*" != "X conftestfile $srcdir/configure"; then |
| + |
| + # If neither matched, then we have a broken ls. This can happen |
| + # if, for instance, CONFIG_SHELL is bash and it inherits a |
| + # broken ls alias from the environment. This has actually |
| + # happened. Such a system could not be considered "sane". |
| + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken |
| +alias in your environment" >&5 |
| +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken |
| +alias in your environment" >&2;} |
| + { (exit 1); exit 1; }; } |
| + fi |
| + |
| + test "$2" = conftestfile |
| + ) |
| +then |
| + # Ok. |
| + : |
| +else |
| + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! |
| +Check your system clock" >&5 |
| +echo "$as_me: error: newly created file is older than distributed files! |
| +Check your system clock" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| +rm -f conftest* |
| +{ echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| +test "$program_prefix" != NONE && |
| + program_transform_name="s&^&$program_prefix&;$program_transform_name" |
| +# Use a double $ so make ignores it. |
| +test "$program_suffix" != NONE && |
| + program_transform_name="s&\$&$program_suffix&;$program_transform_name" |
| +# Double any \ or $. echo might interpret backslashes. |
| +# By default was `s,x,x', remove it if useless. |
| +cat <<\_ACEOF >conftest.sed |
| +s/[\\$]/&&/g;s/;s,x,x,$// |
| +_ACEOF |
| +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` |
| +rm -f conftest.sed |
| + |
| +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
| +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } |
| +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` |
| +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + cat >conftest.make <<\_ACEOF |
| +SHELL = /bin/sh |
| +all: |
| + @echo '@@@%%%=$(MAKE)=@@@%%%' |
| +_ACEOF |
| +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. |
| +case `${MAKE-make} -f conftest.make 2>/dev/null` in |
| + *@@@%%%=?*=@@@%%%*) |
| + eval ac_cv_prog_make_${ac_make}_set=yes;; |
| + *) |
| + eval ac_cv_prog_make_${ac_make}_set=no;; |
| +esac |
| +rm -f conftest.make |
| +fi |
| +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| + SET_MAKE= |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| + SET_MAKE="MAKE=${MAKE-make}" |
| +fi |
| + |
| + |
| +# Check whether --enable-multilib was given. |
| +if test "${enable_multilib+set}" = set; then |
| + enableval=$enable_multilib; case "${enableval}" in |
| + yes) multilib=yes ;; |
| + no) multilib=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for multilib option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + multilib=yes |
| +fi |
| + |
| +# Check whether --enable-target-optspace was given. |
| +if test "${enable_target_optspace+set}" = set; then |
| + enableval=$enable_target_optspace; case "${enableval}" in |
| + yes) target_optspace=yes ;; |
| + no) target_optspace=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + target_optspace= |
| +fi |
| + |
| +# Check whether --enable-malloc-debugging was given. |
| +if test "${enable_malloc_debugging+set}" = set; then |
| + enableval=$enable_malloc_debugging; case "${enableval}" in |
| + yes) malloc_debugging=yes ;; |
| + no) malloc_debugging=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + malloc_debugging= |
| +fi |
| + |
| +# Check whether --enable-newlib-multithread was given. |
| +if test "${enable_newlib_multithread+set}" = set; then |
| + enableval=$enable_newlib_multithread; case "${enableval}" in |
| + yes) newlib_multithread=yes ;; |
| + no) newlib_multithread=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_multithread=yes |
| +fi |
| + |
| +# Check whether --enable-newlib-iconv was given. |
| +if test "${enable_newlib_iconv+set}" = set; then |
| + enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then |
| + case "${enableval}" in |
| + yes) newlib_iconv=yes ;; |
| + no) newlib_iconv=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| + fi |
| +else |
| + newlib_iconv=${newlib_iconv} |
| +fi |
| + |
| +# Check whether --enable-newlib-elix-level was given. |
| +if test "${enable_newlib_elix_level+set}" = set; then |
| + enableval=$enable_newlib_elix_level; case "${enableval}" in |
| + 0) newlib_elix_level=0 ;; |
| + 1) newlib_elix_level=1 ;; |
| + 2) newlib_elix_level=2 ;; |
| + 3) newlib_elix_level=3 ;; |
| + 4) newlib_elix_level=4 ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_elix_level=0 |
| +fi |
| + |
| +# Check whether --enable-newlib-io-float was given. |
| +if test "${enable_newlib_io_float+set}" = set; then |
| + enableval=$enable_newlib_io_float; case "${enableval}" in |
| + yes) newlib_io_float=yes ;; |
| + no) newlib_io_float=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_io_float=yes |
| +fi |
| + |
| +# Check whether --enable-newlib-supplied-syscalls was given. |
| +if test "${enable_newlib_supplied_syscalls+set}" = set; then |
| + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in |
| + yes) newlib_may_supply_syscalls=yes ;; |
| + no) newlib_may_supply_syscalls=no ;; |
| + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 |
| +echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;} |
| + { (exit 1); exit 1; }; } ;; |
| + esac |
| +else |
| + newlib_may_supply_syscalls=yes |
| +fi |
| + |
| + |
| + |
| +if test x${newlib_may_supply_syscalls} = xyes; then |
| + MAY_SUPPLY_SYSCALLS_TRUE= |
| + MAY_SUPPLY_SYSCALLS_FALSE='#' |
| +else |
| + MAY_SUPPLY_SYSCALLS_TRUE='#' |
| + MAY_SUPPLY_SYSCALLS_FALSE= |
| +fi |
| + |
| + |
| +test -z "${with_target_subdir}" && with_target_subdir=. |
| + |
| +if test "${srcdir}" = "."; then |
| + if test "${with_target_subdir}" != "."; then |
| + newlib_basedir="${srcdir}/${with_multisrctop}../../../.." |
| + else |
| + newlib_basedir="${srcdir}/${with_multisrctop}../../.." |
| + fi |
| +else |
| + newlib_basedir="${srcdir}/../../.." |
| +fi |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking target system type" >&5 |
| +echo $ECHO_N "checking target system type... $ECHO_C" >&6; } |
| +if test "${ac_cv_target+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test "x$target_alias" = x; then |
| + ac_cv_target=$ac_cv_host |
| +else |
| + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 |
| +echo "${ECHO_T}$ac_cv_target" >&6; } |
| +case $ac_cv_target in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 |
| +echo "$as_me: error: invalid value of canonical target" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| +target=$ac_cv_target |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_target |
| +shift |
| +target_cpu=$1 |
| +target_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +target_os=$* |
| +IFS=$ac_save_IFS |
| +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac |
| + |
| + |
| +# The aliases save the names the user supplied, while $host etc. |
| +# will get canonicalized. |
| +test -n "$target_alias" && |
| + test "$program_prefix$program_suffix$program_transform_name" = \ |
| + NONENONEs,x,x, && |
| + program_prefix=${target_alias}- |
| + |
| + |
| +PACKAGE=newlib |
| + |
| +VERSION=1.14.0.atmel.1.0.1 |
| + |
| +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then |
| + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 |
| +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define PACKAGE "$PACKAGE" |
| +_ACEOF |
| + |
| + |
| +cat >>confdefs.h <<_ACEOF |
| +#define VERSION "$VERSION" |
| +_ACEOF |
| + |
| + |
| + |
| +missing_dir=`cd $ac_aux_dir && pwd` |
| +{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 |
| +echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then |
| + ACLOCAL=aclocal-${am__api_version} |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working autoconf" >&5 |
| +echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (autoconf --version) < /dev/null > /dev/null 2>&1; then |
| + AUTOCONF=autoconf |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + AUTOCONF="$missing_dir/missing autoconf" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 |
| +echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then |
| + AUTOMAKE=automake-${am__api_version} |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + AUTOMAKE="$missing_dir/missing automake-${am__api_version}" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working autoheader" >&5 |
| +echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (autoheader --version) < /dev/null > /dev/null 2>&1; then |
| + AUTOHEADER=autoheader |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + AUTOHEADER="$missing_dir/missing autoheader" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: checking for working makeinfo" >&5 |
| +echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; } |
| +# Run test in a subshell; some versions of sh will print an error if |
| +# an executable is not found, even if stderr is redirected. |
| +# Redirect stdin to placate older versions of autoconf. Sigh. |
| +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then |
| + MAKEINFO=makeinfo |
| + { echo "$as_me:$LINENO: result: found" >&5 |
| +echo "${ECHO_T}found" >&6; } |
| +else |
| + MAKEINFO="$missing_dir/missing makeinfo" |
| + { echo "$as_me:$LINENO: result: missing" >&5 |
| +echo "${ECHO_T}missing" >&6; } |
| +fi |
| + |
| + |
| + |
| +# FIXME: We temporarily define our own version of AC_PROG_CC. This is |
| +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
| +# are probably using a cross compiler, which will not be able to fully |
| +# link an executable. This should really be fixed in autoconf |
| +# itself. |
| + |
| + |
| + |
| +# Extract the first word of "gcc", so it can be a program name with args. |
| +set dummy gcc; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_CC+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$CC"; then |
| + ac_cv_prog_CC="$CC" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_CC="gcc" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +CC=$ac_cv_prog_CC |
| +if test -n "$CC"; then |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +if test -z "$CC"; then |
| + # Extract the first word of "cc", so it can be a program name with args. |
| +set dummy cc; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_CC+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$CC"; then |
| + ac_cv_prog_CC="$CC" # Let the user override the test. |
| +else |
| + ac_prog_rejected=no |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| + ac_prog_rejected=yes |
| + continue |
| + fi |
| + ac_cv_prog_CC="cc" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +if test $ac_prog_rejected = yes; then |
| + # We found a bogon in the path, so make sure we never use it. |
| + set dummy $ac_cv_prog_CC |
| + shift |
| + if test $# != 0; then |
| + # We chose a different compiler from the bogus one. |
| + # However, it has the same basename, so the bogon will be chosen |
| + # first if we set CC to just the basename; use the full file name. |
| + shift |
| + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" |
| + fi |
| +fi |
| +fi |
| +fi |
| +CC=$ac_cv_prog_CC |
| +if test -n "$CC"; then |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 |
| +echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +#AC_PROG_CC_GNU |
| + |
| +if test $ac_cv_c_compiler_gnu = yes; then |
| + GCC=yes |
| + ac_test_CFLAGS="${CFLAGS+set}" |
| + ac_save_CFLAGS="$CFLAGS" |
| + CFLAGS= |
| +# AC_PROG_CC_G |
| + if test "$ac_test_CFLAGS" = set; then |
| + CFLAGS="$ac_save_CFLAGS" |
| + elif test $ac_cv_prog_cc_g = yes; then |
| + CFLAGS="-g -O2" |
| + else |
| + CFLAGS="-O2" |
| + fi |
| +else |
| + GCC= |
| + test "${CFLAGS+set}" = set || CFLAGS="-g" |
| +fi |
| + |
| + |
| +if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. |
| +set dummy ${ac_tool_prefix}as; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_AS+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$AS"; then |
| + ac_cv_prog_AS="$AS" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_AS="${ac_tool_prefix}as" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +AS=$ac_cv_prog_AS |
| +if test -n "$AS"; then |
| + { echo "$as_me:$LINENO: result: $AS" >&5 |
| +echo "${ECHO_T}$AS" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +fi |
| +if test -z "$ac_cv_prog_AS"; then |
| + ac_ct_AS=$AS |
| + # Extract the first word of "as", so it can be a program name with args. |
| +set dummy as; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_ac_ct_AS+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$ac_ct_AS"; then |
| + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_ac_ct_AS="as" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +ac_ct_AS=$ac_cv_prog_ac_ct_AS |
| +if test -n "$ac_ct_AS"; then |
| + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| +echo "${ECHO_T}$ac_ct_AS" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + if test "x$ac_ct_AS" = x; then |
| + AS="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AS=$ac_ct_AS |
| + fi |
| +else |
| + AS="$ac_cv_prog_AS" |
| +fi |
| + |
| +if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. |
| +set dummy ${ac_tool_prefix}ar; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_AR+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$AR"; then |
| + ac_cv_prog_AR="$AR" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_AR="${ac_tool_prefix}ar" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +AR=$ac_cv_prog_AR |
| +if test -n "$AR"; then |
| + { echo "$as_me:$LINENO: result: $AR" >&5 |
| +echo "${ECHO_T}$AR" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +fi |
| +if test -z "$ac_cv_prog_AR"; then |
| + ac_ct_AR=$AR |
| + # Extract the first word of "ar", so it can be a program name with args. |
| +set dummy ar; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$ac_ct_AR"; then |
| + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_ac_ct_AR="ar" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +ac_ct_AR=$ac_cv_prog_ac_ct_AR |
| +if test -n "$ac_ct_AR"; then |
| + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| +echo "${ECHO_T}$ac_ct_AR" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + if test "x$ac_ct_AR" = x; then |
| + AR="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AR=$ac_ct_AR |
| + fi |
| +else |
| + AR="$ac_cv_prog_AR" |
| +fi |
| + |
| +if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. |
| +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_RANLIB+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$RANLIB"; then |
| + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +RANLIB=$ac_cv_prog_RANLIB |
| +if test -n "$RANLIB"; then |
| + { echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| +echo "${ECHO_T}$RANLIB" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + |
| +fi |
| +if test -z "$ac_cv_prog_RANLIB"; then |
| + ac_ct_RANLIB=$RANLIB |
| + # Extract the first word of "ranlib", so it can be a program name with args. |
| +set dummy ranlib; ac_word=$2 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if test -n "$ac_ct_RANLIB"; then |
| + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. |
| +else |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + ac_cv_prog_ac_ct_RANLIB="ranlib" |
| + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| + break 2 |
| + fi |
| +done |
| +done |
| +IFS=$as_save_IFS |
| + |
| +fi |
| +fi |
| +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
| +if test -n "$ac_ct_RANLIB"; then |
| + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } |
| +else |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| +fi |
| + |
| + if test "x$ac_ct_RANLIB" = x; then |
| + RANLIB=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + RANLIB=$ac_ct_RANLIB |
| + fi |
| +else |
| + RANLIB="$ac_cv_prog_RANLIB" |
| +fi |
| + |
| + |
| +# Find a good install program. We prefer a C program (faster), |
| +# so one script is as good as another. But avoid the broken or |
| +# incompatible versions: |
| +# SysV /etc/install, /usr/sbin/install |
| +# SunOS /usr/etc/install |
| +# IRIX /sbin/install |
| +# AIX /bin/install |
| +# AmigaOS /C/install, which installs bootblocks on floppy discs |
| +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
| +# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
| +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| +# OS/2's system install, which has a completely different semantic |
| +# ./install, which can be erroneously created by make from ./install.sh. |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| +if test -z "$INSTALL"; then |
| +if test "${ac_cv_path_install+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + # Account for people who put trailing slashes in PATH elements. |
| +case $as_dir/ in |
| + ./ | .// | /cC/* | \ |
| + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
| + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ |
| + /usr/ucb/* ) ;; |
| + *) |
| + # OSF1 and SCO ODT 3.0 have their own names for install. |
| + # Don't use installbsd from OSF since it installs stuff as root |
| + # by default. |
| + for ac_prog in ginstall scoinst install; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| + if test $ac_prog = install && |
| + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # AIX install. It has an incompatible calling convention. |
| + : |
| + elif test $ac_prog = install && |
| + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| + # program-specific install script used by HP pwplus--don't use. |
| + : |
| + else |
| + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
| + break 3 |
| + fi |
| + fi |
| + done |
| + done |
| + ;; |
| +esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + if test "${ac_cv_path_install+set}" = set; then |
| + INSTALL=$ac_cv_path_install |
| + else |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| + # break other packages using the cache if that directory is |
| + # removed, or if the value is a relative name. |
| + INSTALL=$ac_install_sh |
| + fi |
| +fi |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| + |
| +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| +# It thinks the first close brace ends the variable substitution. |
| +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
| + |
| +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
| + |
| +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 |
| +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } |
| + # Check whether --enable-maintainer-mode was given. |
| +if test "${enable_maintainer_mode+set}" = set; then |
| + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval |
| +else |
| + USE_MAINTAINER_MODE=no |
| +fi |
| + |
| + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 |
| +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } |
| + |
| + |
| +if test $USE_MAINTAINER_MODE = yes; then |
| + MAINTAINER_MODE_TRUE= |
| + MAINTAINER_MODE_FALSE='#' |
| +else |
| + MAINTAINER_MODE_TRUE='#' |
| + MAINTAINER_MODE_FALSE= |
| +fi |
| + MAINT=$MAINTAINER_MODE_TRUE |
| + |
| + |
| + |
| +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, |
| +# at least currently, we never actually build a program, so we never |
| +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally |
| +# fails, because we are probably configuring with a cross compiler |
| +# which can't create executables. So we include AC_EXEEXT to keep |
| +# automake happy, but we don't execute it, since we don't care about |
| +# the result. |
| +#if false; then |
| +# |
| +#fi |
| + |
| +. ${newlib_basedir}/configure.host |
| + |
| +newlib_cflags="${newlib_cflags} -fno-builtin" |
| + |
| +NEWLIB_CFLAGS=${newlib_cflags} |
| + |
| + |
| +LDFLAGS=${ldflags} |
| + |
| + |
| + |
| + |
| +if test x${newlib_elix_level} = x0; then |
| + ELIX_LEVEL_0_TRUE= |
| + ELIX_LEVEL_0_FALSE='#' |
| +else |
| + ELIX_LEVEL_0_TRUE='#' |
| + ELIX_LEVEL_0_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x1; then |
| + ELIX_LEVEL_1_TRUE= |
| + ELIX_LEVEL_1_FALSE='#' |
| +else |
| + ELIX_LEVEL_1_TRUE='#' |
| + ELIX_LEVEL_1_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x2; then |
| + ELIX_LEVEL_2_TRUE= |
| + ELIX_LEVEL_2_FALSE='#' |
| +else |
| + ELIX_LEVEL_2_TRUE='#' |
| + ELIX_LEVEL_2_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x3; then |
| + ELIX_LEVEL_3_TRUE= |
| + ELIX_LEVEL_3_FALSE='#' |
| +else |
| + ELIX_LEVEL_3_TRUE='#' |
| + ELIX_LEVEL_3_FALSE= |
| +fi |
| + |
| + |
| +if test x${newlib_elix_level} = x4; then |
| + ELIX_LEVEL_4_TRUE= |
| + ELIX_LEVEL_4_FALSE='#' |
| +else |
| + ELIX_LEVEL_4_TRUE='#' |
| + ELIX_LEVEL_4_FALSE= |
| +fi |
| + |
| + |
| + |
| +if test x${use_libtool} = xyes; then |
| + USE_LIBTOOL_TRUE= |
| + USE_LIBTOOL_FALSE='#' |
| +else |
| + USE_LIBTOOL_TRUE='#' |
| + USE_LIBTOOL_FALSE= |
| +fi |
| + |
| +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we |
| +# use oext, which is set in configure.host based on the target platform. |
| +OBJEXT=${oext} |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| + |
| +ac_config_files="$ac_config_files Makefile" |
| + |
| +cat >confcache <<\_ACEOF |
| +# This file is a shell script that caches the results of configure |
| +# tests run on this system so they can be shared between configure |
| +# scripts and configure runs, see configure's option --config-cache. |
| +# It is not useful on other systems. If it contains results you don't |
| +# want to keep, you may remove or edit it. |
| +# |
| +# config.status only pays attention to the cache file if you give it |
| +# the --recheck option to rerun configure. |
| +# |
| +# `ac_cv_env_foo' variables (set or unset) will be overridden when |
| +# loading this file, other *unset* `ac_cv_foo' will be assigned the |
| +# following values. |
| + |
| +_ACEOF |
| + |
| +# The following way of writing the cache mishandles newlines in values, |
| +# but we know of no workaround that is simple, portable, and efficient. |
| +# So, we kill variables containing newlines. |
| +# Ultrix sh set writes to stderr and can't be redirected directly, |
| +# and sets the high bit in the cache file unless we assign to the vars. |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| + |
| + (set) 2>&1 | |
| + case $as_nl`(ac_space=' '; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| + # `set' does not quote correctly, so add quotes (double-quote |
| + # substitution turns \\\\ into \\, and sed turns \\ into \). |
| + sed -n \ |
| + "s/'/'\\\\''/g; |
| + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" |
| + ;; #( |
| + *) |
| + # `set' quotes correctly as required by POSIX, so do not add quotes. |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| + ;; |
| + esac | |
| + sort |
| +) | |
| + sed ' |
| + /^ac_cv_env_/b end |
| + t clear |
| + :clear |
| + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ |
| + t end |
| + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
| + :end' >>confcache |
| +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else |
| + if test -w "$cache_file"; then |
| + test "x$cache_file" != "x/dev/null" && |
| + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 |
| +echo "$as_me: updating cache $cache_file" >&6;} |
| + cat confcache >$cache_file |
| + else |
| + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 |
| +echo "$as_me: not updating unwritable cache $cache_file" >&6;} |
| + fi |
| +fi |
| +rm -f confcache |
| + |
| +test "x$prefix" = xNONE && prefix=$ac_default_prefix |
| +# Let make expand exec_prefix. |
| +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
| + |
| +# Transform confdefs.h into DEFS. |
| +# Protect against shell expansion while executing Makefile rules. |
| +# Protect against Makefile macro expansion. |
| +# |
| +# If the first sed substitution is executed (which looks for macros that |
| +# take arguments), then branch to the quote section. Otherwise, |
| +# look for a macro that doesn't take arguments. |
| +ac_script=' |
| +t clear |
| +:clear |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g |
| +t quote |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g |
| +t quote |
| +b any |
| +:quote |
| +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g |
| +s/\[/\\&/g |
| +s/\]/\\&/g |
| +s/\$/$$/g |
| +H |
| +:any |
| +${ |
| + g |
| + s/^\n// |
| + s/\n/ /g |
| + p |
| +} |
| +' |
| +DEFS=`sed -n "$ac_script" confdefs.h` |
| + |
| + |
| +ac_libobjs= |
| +ac_ltlibobjs= |
| +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue |
| + # 1. Remove the extension, and $U if already installed. |
| + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' |
| + ac_i=`echo "$ac_i" | sed "$ac_script"` |
| + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR |
| + # will be set to the directory where LIBOBJS objects are built. |
| + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" |
| + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' |
| +done |
| +LIBOBJS=$ac_libobjs |
| + |
| +LTLIBOBJS=$ac_ltlibobjs |
| + |
| + |
| + |
| +: ${CONFIG_STATUS=./config.status} |
| +ac_clean_files_save=$ac_clean_files |
| +ac_clean_files="$ac_clean_files $CONFIG_STATUS" |
| +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 |
| +echo "$as_me: creating $CONFIG_STATUS" >&6;} |
| +cat >$CONFIG_STATUS <<_ACEOF |
| +#! $SHELL |
| +# Generated by $as_me. |
| +# Run this file to recreate the current configuration. |
| +# Compiler output produced by configure, useful for debugging |
| +# configure, is in config.log if it exists. |
| + |
| +debug=false |
| +ac_cs_recheck=false |
| +ac_cs_silent=false |
| +SHELL=\${CONFIG_SHELL-$SHELL} |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +## --------------------- ## |
| +## M4sh Initialization. ## |
| +## --------------------- ## |
| + |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| +fi |
| + |
| +# Support unset when possible. |
| +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| + as_unset=unset |
| +else |
| + as_unset=false |
| +fi |
| + |
| + |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| +# Work around bugs in pre-3.0 UWIN ksh. |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| +PS1='$ ' |
| +PS2='> ' |
| +PS4='+ ' |
| + |
| +# NLS nuisances. |
| +for as_var in \ |
| + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
| + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
| + LC_TELEPHONE LC_TIME |
| +do |
| + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| + eval $as_var=C; export $as_var |
| + else |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + fi |
| +done |
| + |
| +# Required to use basename. |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| + as_basename=basename |
| +else |
| + as_basename=false |
| +fi |
| + |
| + |
| +# Name of the executable. |
| +as_me=`$as_basename -- "$0" || |
| +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| + X"$0" : 'X\(//\)$' \| \ |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X/"$0" | |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + |
| +# CDPATH. |
| +$as_unset CDPATH |
| + |
| + |
| + |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| + |
| + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| + # uniformly replaced by the line number. The first 'sed' inserts a |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| + sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| + N |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| + t loop |
| + s/-\n.*// |
| + ' >$as_me.lineno && |
| + chmod +x "$as_me.lineno" || |
| + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + # Don't try to exec as it changes $[0], causing all sort of problems |
| + # (the dirname of $[0] is not the place where we might find the |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| + # Exit status is that of the last command. |
| + exit |
| +} |
| + |
| + |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| +esac |
| + |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| + as_expr=expr |
| +else |
| + as_expr=false |
| +fi |
| + |
| +rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| +echo >conf$$.file |
| +if ln -s conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| + as_ln_s='cp -p' |
| +elif ln conf$$.file conf$$ 2>/dev/null; then |
| + as_ln_s=ln |
| +else |
| + as_ln_s='cp -p' |
| +fi |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| + |
| +if mkdir -p . 2>/dev/null; then |
| + as_mkdir_p=: |
| +else |
| + test -d ./-p && rmdir ./-p |
| + as_mkdir_p=false |
| +fi |
| + |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| + |
| +# Sed expression to map a string onto a valid CPP name. |
| +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| +# Sed expression to map a string onto a valid variable name. |
| +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| + |
| + |
| +exec 6>&1 |
| + |
| +# Save the log message, to keep $[0] and so on meaningful, and to |
| +# report actual input values of CONFIG_FILES etc. instead of their |
| +# values after options handling. |
| +ac_log=" |
| +This file was extended by newlib $as_me NEWLIB_VERSION, which was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| + |
| + CONFIG_FILES = $CONFIG_FILES |
| + CONFIG_HEADERS = $CONFIG_HEADERS |
| + CONFIG_LINKS = $CONFIG_LINKS |
| + CONFIG_COMMANDS = $CONFIG_COMMANDS |
| + $ $0 $@ |
| + |
| +on `(hostname || uname -n) 2>/dev/null | sed 1q` |
| +" |
| + |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +# Files that config.status was made for. |
| +config_files="$ac_config_files" |
| + |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +ac_cs_usage="\ |
| +\`$as_me' instantiates files from templates according to the |
| +current configuration. |
| + |
| +Usage: $0 [OPTIONS] [FILE]... |
| + |
| + -h, --help print this help, then exit |
| + -V, --version print version number and configuration settings, then exit |
| + -q, --quiet do not print progress messages |
| + -d, --debug don't remove temporary files |
| + --recheck update $as_me by reconfiguring in the same conditions |
| + --file=FILE[:TEMPLATE] |
| + instantiate the configuration file FILE |
| + |
| +Configuration files: |
| +$config_files |
| + |
| +Report bugs to <bug-autoconf@gnu.org>." |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +ac_cs_version="\\ |
| +newlib config.status NEWLIB_VERSION |
| +configured by $0, generated by GNU Autoconf 2.61, |
| + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" |
| + |
| +Copyright (C) 2006 Free Software Foundation, Inc. |
| +This config.status script is free software; the Free Software Foundation |
| +gives unlimited permission to copy, distribute and modify it." |
| + |
| +ac_pwd='$ac_pwd' |
| +srcdir='$srcdir' |
| +INSTALL='$INSTALL' |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +# If no file are specified by the user, then we need to provide default |
| +# value. By we need to know if files were specified by the user. |
| +ac_need_defaults=: |
| +while test $# != 0 |
| +do |
| + case $1 in |
| + --*=*) |
| + ac_option=`expr "X$1" : 'X\([^=]*\)='` |
| + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` |
| + ac_shift=: |
| + ;; |
| + *) |
| + ac_option=$1 |
| + ac_optarg=$2 |
| + ac_shift=shift |
| + ;; |
| + esac |
| + |
| + case $ac_option in |
| + # Handling of the options. |
| + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
| + ac_cs_recheck=: ;; |
| + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) |
| + echo "$ac_cs_version"; exit ;; |
| + --debug | --debu | --deb | --de | --d | -d ) |
| + debug=: ;; |
| + --file | --fil | --fi | --f ) |
| + $ac_shift |
| + CONFIG_FILES="$CONFIG_FILES $ac_optarg" |
| + ac_need_defaults=false;; |
| + --he | --h | --help | --hel | -h ) |
| + echo "$ac_cs_usage"; exit ;; |
| + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| + | -silent | --silent | --silen | --sile | --sil | --si | --s) |
| + ac_cs_silent=: ;; |
| + |
| + # This is an error. |
| + -*) { echo "$as_me: error: unrecognized option: $1 |
| +Try \`$0 --help' for more information." >&2 |
| + { (exit 1); exit 1; }; } ;; |
| + |
| + *) ac_config_targets="$ac_config_targets $1" |
| + ac_need_defaults=false ;; |
| + |
| + esac |
| + shift |
| +done |
| + |
| +ac_configure_extra_args= |
| + |
| +if $ac_cs_silent; then |
| + exec 6>/dev/null |
| + ac_configure_extra_args="$ac_configure_extra_args --silent" |
| +fi |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +if \$ac_cs_recheck; then |
| + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
| + CONFIG_SHELL=$SHELL |
| + export CONFIG_SHELL |
| + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
| +fi |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +exec 5>>config.log |
| +{ |
| + echo |
| + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
| +## Running $as_me. ## |
| +_ASBOX |
| + echo "$ac_log" |
| +} >&5 |
| + |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| + |
| +# Handling of arguments. |
| +for ac_config_target in $ac_config_targets |
| +do |
| + case $ac_config_target in |
| + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
| + |
| + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
| +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
| + { (exit 1); exit 1; }; };; |
| + esac |
| +done |
| + |
| + |
| +# If the user did not use the arguments to specify the items to instantiate, |
| +# then the envvar interface is used. Set only those that are not. |
| +# We use the long form for the default assignment because of an extremely |
| +# bizarre bug on SunOS 4.1.3. |
| +if $ac_need_defaults; then |
| + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files |
| +fi |
| + |
| +# Have a temporary directory for convenience. Make it in the build tree |
| +# simply because there is no reason against having it here, and in addition, |
| +# creating and moving files from /tmp can sometimes cause problems. |
| +# Hook for its removal unless debugging. |
| +# Note that there is a small window in which the directory will not be cleaned: |
| +# after its creation but before its name has been assigned to `$tmp'. |
| +$debug || |
| +{ |
| + tmp= |
| + trap 'exit_status=$? |
| + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status |
| +' 0 |
| + trap '{ (exit 1); exit 1; }' 1 2 13 15 |
| +} |
| +# Create a (secure) tmp directory for tmp files. |
| + |
| +{ |
| + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && |
| + test -n "$tmp" && test -d "$tmp" |
| +} || |
| +{ |
| + tmp=./conf$$-$RANDOM |
| + (umask 077 && mkdir "$tmp") |
| +} || |
| +{ |
| + echo "$me: cannot create a temporary directory in ." >&2 |
| + { (exit 1); exit 1; } |
| +} |
| + |
| +# |
| +# Set up the sed scripts for CONFIG_FILES section. |
| +# |
| + |
| +# No need to generate the scripts if there are no CONFIG_FILES. |
| +# This happens for instance when ./config.status config.h |
| +if test -n "$CONFIG_FILES"; then |
| + |
| +_ACEOF |
| + |
| + |
| + |
| +ac_delim='%!_!# ' |
| +for ac_last_try in false false false false false :; do |
| + cat >conf$$subs.sed <<_ACEOF |
| +SHELL!$SHELL$ac_delim |
| +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim |
| +PACKAGE_NAME!$PACKAGE_NAME$ac_delim |
| +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim |
| +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim |
| +PACKAGE_STRING!$PACKAGE_STRING$ac_delim |
| +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim |
| +exec_prefix!$exec_prefix$ac_delim |
| +prefix!$prefix$ac_delim |
| +program_transform_name!$program_transform_name$ac_delim |
| +bindir!$bindir$ac_delim |
| +sbindir!$sbindir$ac_delim |
| +libexecdir!$libexecdir$ac_delim |
| +datarootdir!$datarootdir$ac_delim |
| +datadir!$datadir$ac_delim |
| +sysconfdir!$sysconfdir$ac_delim |
| +sharedstatedir!$sharedstatedir$ac_delim |
| +localstatedir!$localstatedir$ac_delim |
| +includedir!$includedir$ac_delim |
| +oldincludedir!$oldincludedir$ac_delim |
| +docdir!$docdir$ac_delim |
| +infodir!$infodir$ac_delim |
| +htmldir!$htmldir$ac_delim |
| +dvidir!$dvidir$ac_delim |
| +pdfdir!$pdfdir$ac_delim |
| +psdir!$psdir$ac_delim |
| +libdir!$libdir$ac_delim |
| +localedir!$localedir$ac_delim |
| +mandir!$mandir$ac_delim |
| +DEFS!$DEFS$ac_delim |
| +ECHO_C!$ECHO_C$ac_delim |
| +ECHO_N!$ECHO_N$ac_delim |
| +ECHO_T!$ECHO_T$ac_delim |
| +LIBS!$LIBS$ac_delim |
| +build_alias!$build_alias$ac_delim |
| +host_alias!$host_alias$ac_delim |
| +target_alias!$target_alias$ac_delim |
| +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim |
| +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim |
| +newlib_basedir!$newlib_basedir$ac_delim |
| +build!$build$ac_delim |
| +build_cpu!$build_cpu$ac_delim |
| +build_vendor!$build_vendor$ac_delim |
| +build_os!$build_os$ac_delim |
| +host!$host$ac_delim |
| +host_cpu!$host_cpu$ac_delim |
| +host_vendor!$host_vendor$ac_delim |
| +host_os!$host_os$ac_delim |
| +target!$target$ac_delim |
| +target_cpu!$target_cpu$ac_delim |
| +target_vendor!$target_vendor$ac_delim |
| +target_os!$target_os$ac_delim |
| +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim |
| +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim |
| +INSTALL_DATA!$INSTALL_DATA$ac_delim |
| +PACKAGE!$PACKAGE$ac_delim |
| +VERSION!$VERSION$ac_delim |
| +ACLOCAL!$ACLOCAL$ac_delim |
| +AUTOCONF!$AUTOCONF$ac_delim |
| +AUTOMAKE!$AUTOMAKE$ac_delim |
| +AUTOHEADER!$AUTOHEADER$ac_delim |
| +MAKEINFO!$MAKEINFO$ac_delim |
| +SET_MAKE!$SET_MAKE$ac_delim |
| +CC!$CC$ac_delim |
| +AS!$AS$ac_delim |
| +AR!$AR$ac_delim |
| +RANLIB!$RANLIB$ac_delim |
| +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim |
| +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim |
| +MAINT!$MAINT$ac_delim |
| +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim |
| +LDFLAGS!$LDFLAGS$ac_delim |
| +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim |
| +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim |
| +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim |
| +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim |
| +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim |
| +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim |
| +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim |
| +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim |
| +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim |
| +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim |
| +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim |
| +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim |
| +OBJEXT!$OBJEXT$ac_delim |
| +oext!$oext$ac_delim |
| +aext!$aext$ac_delim |
| +libm_machine_dir!$libm_machine_dir$ac_delim |
| +machine_dir!$machine_dir$ac_delim |
| +sys_dir!$sys_dir$ac_delim |
| +LIBOBJS!$LIBOBJS$ac_delim |
| +LTLIBOBJS!$LTLIBOBJS$ac_delim |
| +_ACEOF |
| + |
| + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then |
| + break |
| + elif $ac_last_try; then |
| + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 |
| +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} |
| + { (exit 1); exit 1; }; } |
| + else |
| + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " |
| + fi |
| +done |
| + |
| +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` |
| +if test -n "$ac_eof"; then |
| + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` |
| + ac_eof=`expr $ac_eof + 1` |
| +fi |
| + |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end |
| +_ACEOF |
| +sed ' |
| +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g |
| +s/^/s,@/; s/!/@,|#_!!_#|/ |
| +:n |
| +t n |
| +s/'"$ac_delim"'$/,g/; t |
| +s/$/\\/; p |
| +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n |
| +' >>$CONFIG_STATUS <conf$$subs.sed |
| +rm -f conf$$subs.sed |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +:end |
| +s/|#_!!_#|//g |
| +CEOF$ac_eof |
| +_ACEOF |
| + |
| + |
| +# VPATH may cause trouble with some makes, so we remove $(srcdir), |
| +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
| +# trailing colons and then remove the whole line if VPATH becomes empty |
| +# (actually we leave an empty line to preserve line numbers). |
| +if test "x$srcdir" = x.; then |
| + ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
| +s/:*\$(srcdir):*/:/ |
| +s/:*\${srcdir}:*/:/ |
| +s/:*@srcdir@:*/:/ |
| +s/^\([^=]*=[ ]*\):*/\1/ |
| +s/:*$// |
| +s/^[^=]*=[ ]*$// |
| +}' |
| +fi |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +fi # test -n "$CONFIG_FILES" |
| + |
| + |
| +for ac_tag in :F $CONFIG_FILES |
| +do |
| + case $ac_tag in |
| + :[FHLC]) ac_mode=$ac_tag; continue;; |
| + esac |
| + case $ac_mode$ac_tag in |
| + :[FHL]*:*);; |
| + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 |
| +echo "$as_me: error: Invalid tag $ac_tag." >&2;} |
| + { (exit 1); exit 1; }; };; |
| + :[FH]-) ac_tag=-:-;; |
| + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; |
| + esac |
| + ac_save_IFS=$IFS |
| + IFS=: |
| + set x $ac_tag |
| + IFS=$ac_save_IFS |
| + shift |
| + ac_file=$1 |
| + shift |
| + |
| + case $ac_mode in |
| + :L) ac_source=$1;; |
| + :[FH]) |
| + ac_file_inputs= |
| + for ac_f |
| + do |
| + case $ac_f in |
| + -) ac_f="$tmp/stdin";; |
| + *) # Look for the file first in the build tree, then in the source tree |
| + # (if the path is not absolute). The absolute path cannot be DOS-style, |
| + # because $ac_f cannot contain `:'. |
| + test -f "$ac_f" || |
| + case $ac_f in |
| + [\\/$]*) false;; |
| + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; |
| + esac || |
| + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 |
| +echo "$as_me: error: cannot find input file: $ac_f" >&2;} |
| + { (exit 1); exit 1; }; };; |
| + esac |
| + ac_file_inputs="$ac_file_inputs $ac_f" |
| + done |
| + |
| + # Let's still pretend it is `configure' which instantiates (i.e., don't |
| + # use $as_me), people would be surprised to read: |
| + # /* config.h. Generated by config.status. */ |
| + configure_input="Generated from "`IFS=: |
| + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." |
| + if test x"$ac_file" != x-; then |
| + configure_input="$ac_file. $configure_input" |
| + { echo "$as_me:$LINENO: creating $ac_file" >&5 |
| +echo "$as_me: creating $ac_file" >&6;} |
| + fi |
| + |
| + case $ac_tag in |
| + *:-:* | *:-) cat >"$tmp/stdin";; |
| + esac |
| + ;; |
| + esac |
| + |
| + ac_dir=`$as_dirname -- "$ac_file" || |
| +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| + X"$ac_file" : 'X\(//\)[^/]' \| \ |
| + X"$ac_file" : 'X\(//\)$' \| \ |
| + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X"$ac_file" | |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + { as_dir="$ac_dir" |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| + as_dirs= |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| + X"$as_dir" : 'X\(//\)[^/]' \| \ |
| + X"$as_dir" : 'X\(//\)$' \| \ |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| +echo X"$as_dir" | |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| + done |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| + { (exit 1); exit 1; }; }; } |
| + ac_builddir=. |
| + |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| + |
| +case $srcdir in |
| + .) # We are building in place. |
| + ac_srcdir=. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| + ac_srcdir=$srcdir$ac_dir_suffix; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| +esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| + |
| + |
| + case $ac_mode in |
| + :F) |
| + # |
| + # CONFIG_FILE |
| + # |
| + |
| + case $INSTALL in |
| + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; |
| + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; |
| + esac |
| +_ACEOF |
| + |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +# If the template does not know about datarootdir, expand it. |
| +# FIXME: This hack should be removed a few years after 2.60. |
| +ac_datarootdir_hack=; ac_datarootdir_seen= |
| + |
| +case `sed -n '/datarootdir/ { |
| + p |
| + q |
| +} |
| +/@datadir@/p |
| +/@docdir@/p |
| +/@infodir@/p |
| +/@localedir@/p |
| +/@mandir@/p |
| +' $ac_file_inputs` in |
| +*datarootdir*) ac_datarootdir_seen=yes;; |
| +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) |
| + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 |
| +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| + ac_datarootdir_hack=' |
| + s&@datadir@&$datadir&g |
| + s&@docdir@&$docdir&g |
| + s&@infodir@&$infodir&g |
| + s&@localedir@&$localedir&g |
| + s&@mandir@&$mandir&g |
| + s&\\\${datarootdir}&$datarootdir&g' ;; |
| +esac |
| +_ACEOF |
| + |
| +# Neutralize VPATH when `$srcdir' = `.'. |
| +# Shell code in configure.ac might set extrasub. |
| +# FIXME: do we really want to maintain this feature? |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| + sed "$ac_vpsub |
| +$extrasub |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +:t |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
| +s&@configure_input@&$configure_input&;t t |
| +s&@top_builddir@&$ac_top_builddir_sub&;t t |
| +s&@srcdir@&$ac_srcdir&;t t |
| +s&@abs_srcdir@&$ac_abs_srcdir&;t t |
| +s&@top_srcdir@&$ac_top_srcdir&;t t |
| +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t |
| +s&@builddir@&$ac_builddir&;t t |
| +s&@abs_builddir@&$ac_abs_builddir&;t t |
| +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t |
| +s&@INSTALL@&$ac_INSTALL&;t t |
| +$ac_datarootdir_hack |
| +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out |
| + |
| +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && |
| + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && |
| + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && |
| + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&5 |
| +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&2;} |
| + |
| + rm -f "$tmp/stdin" |
| + case $ac_file in |
| + -) cat "$tmp/out"; rm -f "$tmp/out";; |
| + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; |
| + esac |
| + ;; |
| + |
| + |
| + |
| + esac |
| + |
| +done # for ac_tag |
| + |
| + |
| +{ (exit 0); exit 0; } |
| +_ACEOF |
| +chmod +x $CONFIG_STATUS |
| +ac_clean_files=$ac_clean_files_save |
| + |
| + |
| +# configure is writing to config.log, and then calls config.status. |
| +# config.status does its own redirection, appending to config.log. |
| +# Unfortunately, on DOS this fails, as config.log is still kept open |
| +# by configure, so config.status won't be able to write to it; its |
| +# output is simply discarded. So we exec the FD to /dev/null, |
| +# effectively closing config.log, so it can be properly (re)opened and |
| +# appended to by config.status. When coming back to configure, we |
| +# need to make the FD available again. |
| +if test "$no_create" != yes; then |
| + ac_cs_success=: |
| + ac_config_status_args= |
| + test "$silent" = yes && |
| + ac_config_status_args="$ac_config_status_args --quiet" |
| + exec 5>/dev/null |
| + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false |
| + exec 5>>config.log |
| + # Use ||, not &&, to avoid exiting from the if with $? = 1, which |
| + # would make configure fail if this is the last instruction. |
| + $ac_cs_success || { (exit 1); exit 1; } |
| +fi |
| + |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure.in newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in |
| --- newlib-1.17.0/newlib/libc/sys/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,13 @@ |
| +dnl This is the newlib/libc/sys/avr32 configure.in file. |
| +dnl Process this file with autoconf to produce a configure script. |
| + |
| +AC_PREREQ(2.59) |
| +AC_INIT([newlib],[NEWLIB_VERSION]) |
| + |
| +dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. |
| +AC_CONFIG_AUX_DIR(../../../..) |
| + |
| +NEWLIB_CONFIGURE(../../..) |
| + |
| +AC_CONFIG_FILES([Makefile]) |
| +AC_OUTPUT |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/crt0.S newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S |
| --- newlib-1.17.0/newlib/libc/sys/avr32/crt0.S 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,83 @@ |
| + |
| + .section .reset,"ax" |
| + |
| + .global _start |
| + .type _start,@function |
| +_start: |
| + /* Jump to wherever the linker thinks we are... */ |
| + lddpc pc, .Ltext_vaddr |
| + |
| + .align 2 |
| +.Ltext_vaddr: |
| + .word _stext |
| + |
| + .text |
| + .global _stext |
| +_stext: |
| + /* Zero marks the end of the outermost frame. */ |
| + mov r7, 0 |
| + |
| + /* Set up the stack pointer to a fixed value */ |
| + lda.w r10, _estack |
| + |
| + /* If _stack is -1 don't set sp, the stack is then probably |
| + set by some other means i.e. by a bootloader. */ |
| + cp r10, -1 |
| + movne sp, r10 |
| + |
| + /* Copy the data segment into RAM if necessary. If data_lma |
| + is equal to data then VMA==LMA and no copying is necessary. |
| + The linker script must make sure that the data segment is at |
| + least dword-aligned. */ |
| + lda.w r11, _data_lma |
| + lda.w r12, _data |
| + cp.w r11, r12 |
| + breq 1f |
| + lda.w r10, _edata |
| +2: ld.d r8, r11++ |
| + st.d r12++, r8 |
| + cp.w r12, r10 |
| + brlt 2b |
| + |
| + /* Zero the memory in the .bss section. */ |
| +1: lda.w r10, _end |
| + lda.w r12, _edata |
| + |
| + mov r8, 0 |
| + mov r9, 0 |
| +2: st.d r12++, r8 |
| + cp.w r12, r10 |
| + brlt 2b |
| + |
| + /* User dependent initialization */ |
| + call _init_startup |
| + |
| + /* Register _fini function with atexit |
| + The _fini function is responsible for calling destructiors */ |
| + lda.w r12, _fini |
| + call atexit |
| + |
| + /* Call _init in order to initialize constructors etc */ |
| + call _init |
| + |
| + /*Initialize argv, use stack for keeping arguments. |
| + _init_argv() returns argc in r12 and argv in r11 |
| + and the total size used for the arguments in r10.*/ |
| + mov r12, sp |
| + /* Signal that we are storing the arguments in a stackwise |
| + top down approach. */ |
| + mov r11, 0 |
| + call _init_argv |
| + /* If initialization if argv is not handled then _init_argv |
| + returns -1 so set argc to 0 and make sure no space is |
| + allocated on the stack. */ |
| + cp.w r12, -1 |
| + moveq r12, 0 |
| + moveq r10, 0 |
| + sub sp, r10 |
| + |
| + /* Call main and call exit when it returns */ |
| + call main |
| + call exit |
| + |
| + .weak _data_lma |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am |
| --- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,18 @@ |
| +## Process this file with automake to generate Makefile.in |
| + |
| +AUTOMAKE_OPTIONS = cygnus |
| + |
| +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) |
| + |
| +AM_CCASFLAGS = $(INCLUDES) |
| + |
| +noinst_LIBRARIES = lib.a |
| + |
| +lib_a_SOURCES = syscalls.c setjmp.S |
| +lib_a_CCASFLAGS = $(AM_CCASFLAGS) |
| +lib_a_CFLAGS = $(AM_CFLAGS) |
| + |
| +all: crt0.o |
| + |
| +ACLOCAL_AMFLAGS = -I ../../.. |
| +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in |
| --- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,329 @@ |
| +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am |
| + |
| +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. |
| +# This Makefile.in is free software; the Free Software Foundation |
| +# gives unlimited permission to copy and/or distribute it, |
| +# with or without modifications, as long as this notice is preserved. |
| + |
| +# This program is distributed in the hope that it will be useful, |
| +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| +# PARTICULAR PURPOSE. |
| + |
| + |
| +SHELL = @SHELL@ |
| + |
| +srcdir = @srcdir@ |
| +top_srcdir = @top_srcdir@ |
| +VPATH = @srcdir@ |
| +prefix = @prefix@ |
| +exec_prefix = @exec_prefix@ |
| + |
| +bindir = @bindir@ |
| +sbindir = @sbindir@ |
| +libexecdir = @libexecdir@ |
| +datadir = @datadir@ |
| +sysconfdir = @sysconfdir@ |
| +sharedstatedir = @sharedstatedir@ |
| +localstatedir = @localstatedir@ |
| +libdir = @libdir@ |
| +infodir = @infodir@ |
| +mandir = @mandir@ |
| +includedir = @includedir@ |
| +oldincludedir = /usr/include |
| + |
| +DESTDIR = |
| + |
| +pkgdatadir = $(datadir)/@PACKAGE@ |
| +pkglibdir = $(libdir)/@PACKAGE@ |
| +pkgincludedir = $(includedir)/@PACKAGE@ |
| + |
| +top_builddir = . |
| + |
| +ACLOCAL = @ACLOCAL@ |
| +AUTOCONF = @AUTOCONF@ |
| +AUTOMAKE = @AUTOMAKE@ |
| +AUTOHEADER = @AUTOHEADER@ |
| + |
| +INSTALL = @INSTALL@ |
| +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) |
| +INSTALL_DATA = @INSTALL_DATA@ |
| +INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| +transform = @program_transform_name@ |
| + |
| +NORMAL_INSTALL = : |
| +PRE_INSTALL = : |
| +POST_INSTALL = : |
| +NORMAL_UNINSTALL = : |
| +PRE_UNINSTALL = : |
| +POST_UNINSTALL = : |
| +build_alias = @build_alias@ |
| +build_triplet = @build@ |
| +host_alias = @host_alias@ |
| +host_triplet = @host@ |
| +target_alias = @target_alias@ |
| +target_triplet = @target@ |
| +AR = @AR@ |
| +AS = @AS@ |
| +CC = @CC@ |
| +CPP = @CPP@ |
| +EXEEXT = @EXEEXT@ |
| +LDFLAGS = @LDFLAGS@ |
| +MAINT = @MAINT@ |
| +MAKEINFO = @MAKEINFO@ |
| +NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ |
| +OBJEXT = @OBJEXT@ |
| +PACKAGE = @PACKAGE@ |
| +RANLIB = @RANLIB@ |
| +VERSION = @VERSION@ |
| +aext = @aext@ |
| +libm_machine_dir = @libm_machine_dir@ |
| +machine_dir = @machine_dir@ |
| +newlib_basedir = @newlib_basedir@ |
| +oext = @oext@ |
| +sys_dir = @sys_dir@ |
| + |
| +AUTOMAKE_OPTIONS = cygnus |
| + |
| +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) |
| + |
| +noinst_LIBRARIES = lib.a |
| + |
| +lib_a_SOURCES = syscalls.c setjmp.S |
| + |
| +ACLOCAL_AMFLAGS = -I ../../.. |
| +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host |
| +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs |
| +CONFIG_CLEAN_FILES = |
| +LIBRARIES = $(noinst_LIBRARIES) |
| + |
| + |
| +DEFS = @DEFS@ -I. -I$(srcdir) |
| +CPPFLAGS = |
| +LIBS = @LIBS@ |
| +lib_a_LIBADD = |
| +lib_a_OBJECTS = syscalls.o setjmp.o |
| +CFLAGS = @CFLAGS@ |
| +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| +CCLD = $(CC) |
| +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ |
| +DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in |
| + |
| + |
| +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) |
| + |
| +TAR = gtar |
| +GZIP_ENV = --best |
| +SOURCES = $(lib_a_SOURCES) |
| +OBJECTS = $(lib_a_OBJECTS) |
| + |
| +all: all-redirect |
| +.SUFFIXES: |
| +.SUFFIXES: .S .c .o .s |
| +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) |
| + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile |
| + |
| +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| + cd $(top_builddir) \ |
| + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status |
| + |
| +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ |
| + ../../../acinclude.m4 ../../../aclocal.m4 \ |
| + ../../../libtool.m4 |
| + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| + |
| +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| + $(SHELL) ./config.status --recheck |
| +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) |
| + cd $(srcdir) && $(AUTOCONF) |
| + |
| +mostlyclean-noinstLIBRARIES: |
| + |
| +clean-noinstLIBRARIES: |
| + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) |
| + |
| +distclean-noinstLIBRARIES: |
| + |
| +maintainer-clean-noinstLIBRARIES: |
| + |
| +.c.o: |
| + $(COMPILE) -c $< |
| + |
| +.s.o: |
| + $(COMPILE) -c $< |
| + |
| +.S.o: |
| + $(COMPILE) -c $< |
| + |
| +mostlyclean-compile: |
| + -rm -f *.o core *.core |
| + |
| +clean-compile: |
| + |
| +distclean-compile: |
| + -rm -f *.tab.c |
| + |
| +maintainer-clean-compile: |
| + |
| +lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) |
| + -rm -f lib.a |
| + $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) |
| + $(RANLIB) lib.a |
| + |
| +tags: TAGS |
| + |
| +ID: $(HEADERS) $(SOURCES) $(LISP) |
| + list='$(SOURCES) $(HEADERS)'; \ |
| + unique=`for i in $$list; do echo $$i; done | \ |
| + awk ' { files[$$0] = 1; } \ |
| + END { for (i in files) print i; }'`; \ |
| + here=`pwd` && cd $(srcdir) \ |
| + && mkid -f$$here/ID $$unique $(LISP) |
| + |
| +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) |
| + tags=; \ |
| + here=`pwd`; \ |
| + list='$(SOURCES) $(HEADERS)'; \ |
| + unique=`for i in $$list; do echo $$i; done | \ |
| + awk ' { files[$$0] = 1; } \ |
| + END { for (i in files) print i; }'`; \ |
| + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ |
| + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) |
| + |
| +mostlyclean-tags: |
| + |
| +clean-tags: |
| + |
| +distclean-tags: |
| + -rm -f TAGS ID |
| + |
| +maintainer-clean-tags: |
| + |
| +distdir = $(PACKAGE)-$(VERSION) |
| +top_distdir = $(distdir) |
| + |
| +# This target untars the dist file and tries a VPATH configuration. Then |
| +# it guarantees that the distribution is self-contained by making another |
| +# tarfile. |
| +distcheck: dist |
| + -rm -rf $(distdir) |
| + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz |
| + mkdir $(distdir)/=build |
| + mkdir $(distdir)/=inst |
| + dc_install_base=`cd $(distdir)/=inst && pwd`; \ |
| + cd $(distdir)/=build \ |
| + && ../configure --srcdir=.. --prefix=$$dc_install_base \ |
| + && $(MAKE) $(AM_MAKEFLAGS) \ |
| + && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| + && $(MAKE) $(AM_MAKEFLAGS) check \ |
| + && $(MAKE) $(AM_MAKEFLAGS) install \ |
| + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| + && $(MAKE) $(AM_MAKEFLAGS) dist |
| + -rm -rf $(distdir) |
| + @banner="$(distdir).tar.gz is ready for distribution"; \ |
| + dashes=`echo "$$banner" | sed s/./=/g`; \ |
| + echo "$$dashes"; \ |
| + echo "$$banner"; \ |
| + echo "$$dashes" |
| +dist: distdir |
| + -chmod -R a+r $(distdir) |
| + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
| + -rm -rf $(distdir) |
| +dist-all: distdir |
| + -chmod -R a+r $(distdir) |
| + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
| + -rm -rf $(distdir) |
| +distdir: $(DISTFILES) |
| + -rm -rf $(distdir) |
| + mkdir $(distdir) |
| + -chmod 777 $(distdir) |
| + @for file in $(DISTFILES); do \ |
| + if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| + if test -d $$d/$$file; then \ |
| + cp -pr $$d/$$file $(distdir)/$$file; \ |
| + else \ |
| + test -f $(distdir)/$$file \ |
| + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ |
| + || cp -p $$d/$$file $(distdir)/$$file || :; \ |
| + fi; \ |
| + done |
| +info-am: |
| +info: info-am |
| +dvi-am: |
| +dvi: dvi-am |
| +check-am: |
| +check: check-am |
| +installcheck-am: |
| +installcheck: installcheck-am |
| +install-info-am: |
| +install-info: install-info-am |
| +install-exec-am: |
| +install-exec: install-exec-am |
| + |
| +install-data-am: |
| +install-data: install-data-am |
| + |
| +install-am: all-am |
| + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| +install: install-am |
| +uninstall-am: |
| +uninstall: uninstall-am |
| +all-am: Makefile $(LIBRARIES) |
| +all-redirect: all-am |
| +install-strip: |
| + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install |
| +installdirs: |
| + |
| + |
| +mostlyclean-generic: |
| + |
| +clean-generic: |
| + |
| +distclean-generic: |
| + -rm -f Makefile $(CONFIG_CLEAN_FILES) |
| + -rm -f config.cache config.log stamp-h stamp-h[0-9]* |
| + |
| +maintainer-clean-generic: |
| +mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ |
| + mostlyclean-tags mostlyclean-generic |
| + |
| +mostlyclean: mostlyclean-am |
| + |
| +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ |
| + mostlyclean-am |
| + |
| +clean: clean-am |
| + |
| +distclean-am: distclean-noinstLIBRARIES distclean-compile \ |
| + distclean-tags distclean-generic clean-am |
| + |
| +distclean: distclean-am |
| + -rm -f config.status |
| + |
| +maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ |
| + maintainer-clean-compile maintainer-clean-tags \ |
| + maintainer-clean-generic distclean-am |
| + @echo "This command is intended for maintainers to use;" |
| + @echo "it deletes files that may require special tools to rebuild." |
| + |
| +maintainer-clean: maintainer-clean-am |
| + -rm -f config.status |
| + |
| +.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ |
| +clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ |
| +mostlyclean-compile distclean-compile clean-compile \ |
| +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ |
| +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ |
| +check-am installcheck-am installcheck install-info-am install-info \ |
| +install-exec-am install-exec install-data-am install-data install-am \ |
| +install uninstall-am uninstall all-redirect all-am all installdirs \ |
| +mostlyclean-generic distclean-generic clean-generic \ |
| +maintainer-clean-generic clean mostlyclean distclean maintainer-clean |
| + |
| + |
| +all: crt0.o |
| + |
| +# Tell versions [3.59,3.63) of GNU make to not export all variables. |
| +# Otherwise a system limit (for SysV at least) may be exceeded. |
| +.NOEXPORT: |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S |
| --- newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,20 @@ |
| + .text |
| + .globl setjmp |
| +setjmp: |
| + stm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr |
| + retal 0 |
| + |
| + .globl longjmp |
| +longjmp: |
| + ldm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr |
| + /* Put the return value into the integer result register. |
| + But if it is zero then return 1 instead. */ |
| + cp r11, 0 |
| + reteq 1 |
| + retal r11 |
| + |
| + |
| + |
| + |
| + |
| + |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h |
| --- newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,158 @@ |
| +#ifndef __ASM_AVR32_SYSREGS_H |
| +#define __ASM_AVR32_SYSREGS_H |
| + |
| +#define SYSREG_SR 0 |
| +#define SYSREG_EVBA 4 |
| +#define SYSREG_ACBA 8 |
| +#define SYSREG_CPUCR 12 |
| +#define SYSREG_ECR 16 |
| +#define SYSREG_RSR_SUP 20 |
| +#define SYSREG_RSR_INT0 24 |
| +#define SYSREG_RSR_INT1 28 |
| +#define SYSREG_RSR_INT2 32 |
| +#define SYSREG_RSR_INT3 36 |
| +#define SYSREG_RSR_EX 40 |
| +#define SYSREG_RSR_NMI 44 |
| +#define SYSREG_RSR_DBG 48 |
| +#define SYSREG_RAR_SUP 52 |
| +#define SYSREG_RAR_INT0 56 |
| +#define SYSREG_RAR_INT1 60 |
| +#define SYSREG_RAR_INT2 64 |
| +#define SYSREG_RAR_INT3 68 |
| +#define SYSREG_RAR_EX 72 |
| +#define SYSREG_RAR_NMI 76 |
| +#define SYSREG_RAR_DBG 80 |
| +#define SYSREG_JECR 84 |
| +#define SYSREG_JOSP 88 |
| +#define SYSREG_JAVA_LV0 92 |
| +#define SYSREG_JAVA_LV1 96 |
| +#define SYSREG_JAVA_LV2 100 |
| +#define SYSREG_JAVA_LV3 104 |
| +#define SYSREG_JAVA_LV4 108 |
| +#define SYSREG_JAVA_LV5 112 |
| +#define SYSREG_JAVA_LV6 116 |
| +#define SYSREG_JAVA_LV7 120 |
| +#define SYSREG_JTBA 124 |
| +#define SYSREG_JBCR 128 |
| + |
| +#define SYSREG_CONFIG0 256 |
| +#define SYSREG_CONFIG1 260 |
| +#define SYSREG_COUNT 264 |
| +#define SYSREG_COMPARE 268 |
| + |
| +#define SYSREG_BEAR 316 |
| + |
| +/* MMU interface registers */ |
| +#define SYSREG_TLBEHI 272 |
| +#define SYSREG_TLBELO 276 |
| +#define SYSREG_PTBR 280 |
| +#define SYSREG_TLBEAR 284 |
| +#define SYSREG_MMUCR 288 |
| +#define SYSREG_TLBARLO 292 |
| +#define SYSREG_TLBDRLO 296 |
| +#define SYSREG_TLBARHI 300 |
| +#define SYSREG_TLBDRHI 304 |
| + |
| +/* Performance counter */ |
| +#define SYSREG_PCCR 320 |
| + |
| + // Status register bits |
| +#define SR_C_OFFSET 0 |
| +#define SR_Z_OFFSET 1 |
| +#define SR_N_OFFSET 2 |
| +#define SR_V_OFFSET 3 |
| +#define SR_Q_OFFSET 4 |
| +#define SR_T_OFFSET 14 |
| +#define SR_R_OFFSET 15 |
| +#define SR_GM_OFFSET 16 |
| +#define SR_I0M_OFFSET 17 |
| +#define SR_I1M_OFFSET 18 |
| +#define SR_I2M_OFFSET 19 |
| +#define SR_I3M_OFFSET 20 |
| +#define SR_EM_OFFSET 21 |
| +#define SR_M0_OFFSET 22 |
| +#define SR_M1_OFFSET 23 |
| +#define SR_M2_OFFSET 24 |
| +#define SR_D_OFFSET 26 |
| +#define SR_DM_OFFSET 27 |
| +#define SR_J_OFFSET 28 |
| + |
| +#define SR_C (1 << 0) |
| +#define SR_Z (1 << 1) |
| +#define SR_N (1 << 2) |
| +#define SR_V (1 << 3) |
| +#define SR_Q (1 << 4) |
| +#define SR_T (1 << 14) |
| +#define SR_R (1 << 15) |
| +#define SR_GM (1 << 16) |
| +#define SR_I0M (1 << 17) |
| +#define SR_I1M (1 << 18) |
| +#define SR_I2M (1 << 19) |
| +#define SR_I3M (1 << 20) |
| +#define SR_EM (1 << 21) |
| +#define SR_M0 (1 << 22) |
| +#define SR_M1 (1 << 23) |
| +#define SR_M2 (1 << 24) |
| +#define SR_D (1 << 26) |
| +#define SR_DM (1 << 27) |
| +#define SR_J (1 << 28) |
| + |
| +//PCCR bits |
| +#define PCCRS (1<<3) |
| +#define PCCRC (1<<2) |
| +#define PCCRR (1<<1) |
| +#define PCCRE (1<<0) |
| +#define PCCNT_PRESCALE 64 |
| + |
| +//TLBEHI bits |
| +#define TLBEHIVPN (1<<10) |
| +#define TLBEHIV (1<<9) |
| +#define TLBEHII (1<<0) |
| + |
| +//TLBELO = bits |
| +#define TLBELOPFN (1<<10) |
| +#define TLBELOC (1<<9) |
| +#define TLBELOG (1<<8) |
| +#define TLBELOB (1<<7) |
| +#define TLBELOAP (1<<5) |
| +#define TLBELOSZ (1<<2) |
| +#define TLBELOD (1<<1) |
| +#define TLBELOW (1<<0) |
| + |
| +//MMUCR bits |
| +#define MMUIRP (1<<26) |
| +#define MMUILA (1<<20) |
| +#define MMUDRP (1<<14) |
| +#define MMUDLA (1<<8) |
| +#define MMUS (1<<4) |
| +#define MMUN (1<<3) |
| +#define MMUI (1<<2) |
| +#define MMUM (1<<1) |
| +#define MMUE (1<<0) |
| + |
| +// Relative offsets to EVBA |
| +#define H_UNREC_EX 0x000 |
| +#define H_TLB_MH 0x004 |
| +#define H_BUS_ERR_D 0x008 |
| +#define H_BUS_ERR_I 0x00C |
| +#define H_NMI 0x010 |
| +#define H_INST_ADDR 0x014 |
| +#define H_ITLB_MISS 0x050 |
| +#define H_ITLB_PROT 0x018 |
| +#define H_DEBUG 0x01C |
| +#define H_ILL_OPC 0x020 |
| +#define H_UNIMPL_INST 0x024 |
| +#define H_PRIV_VIOL 0x028 |
| +#define H_FLOAT_PT 0x02C |
| +#define H_COPROC_ABS 0x030 |
| +#define H_SCALL 0x100 |
| +#define H_DATA_ADDR_R 0x034 |
| +#define H_DATA_ADDR_W 0x038 |
| +#define H_DTLB_MISS_R 0x060 |
| +#define H_DTLB_MISS_W 0x070 |
| +#define H_DTLB_PROT_R 0x03C |
| +#define H_DTLB_PROT_W 0x040 |
| +#define H_DTLB_MOD 0x044 |
| + |
| + |
| +#endif /* __ASM_AVR32_SYSREGS_H */ |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c |
| --- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,234 @@ |
| +#include "syscalls.h" |
| +#include "sys/sysregs.h" |
| +#include <sys/times.h> |
| +#include <sys/time.h> |
| +#include <stdio.h> |
| +#include <errno.h> |
| + |
| +int __attribute__((weak)) |
| + _init_startup () |
| +{ |
| + return 0; |
| +} |
| + |
| + |
| +clock_t __attribute__((weak)) |
| + _times( struct tms *tms ) |
| +{ |
| + int tick; |
| + tick = __builtin_mfsr(SYSREG_COUNT); |
| + tms->tms_utime = 0; |
| + tms->tms_stime = tick; |
| + tms->tms_cutime = 0; |
| + tms->tms_cstime = 0; |
| + return tick; |
| +} |
| + |
| +extern void __heap_start__, __heap_end__; |
| + |
| +void * __attribute__((weak)) |
| + _sbrk(int increment) |
| +{ |
| + static void *cur_heap_pos = 0; |
| + |
| + //Initialize cur_heap_pos |
| + if ( cur_heap_pos == 0 ) |
| + cur_heap_pos = &__heap_start__; |
| + |
| + if ( (cur_heap_pos + increment) <= &__heap_end__ ){ |
| + void *heap_pos = cur_heap_pos; |
| + cur_heap_pos += increment; |
| + return heap_pos; |
| + } else { |
| +#ifdef DEBUG_MSG_ON |
| + fprintf(stderr, "Warning: Heap is running full trying to allocate %i bytes!!!!\n", increment); |
| + fprintf(stderr, "\tHeap start address\t= 0x%x\n", &__heap_start__); |
| + fprintf(stderr, "\tHeap end address\t= 0x%x\n", &__heap_end__); |
| + fprintf(stderr, "\tCurrent heap address\t= 0x%x\n", cur_heap_pos); |
| + fflush(stderr); |
| +#endif |
| + errno = ENOMEM; |
| + return (void *)-1; |
| + } |
| + return (void *)-1; |
| +} |
| + |
| +void __attribute__((weak,naked)) |
| + _init_argv (void *arg_mem_top) |
| +{ |
| + T2H_SYSCALL(T2H_SYSCALL_INIT_ARGV); |
| + T2H_SYSCALL_RETURN(); |
| +} |
| + |
| +void __attribute__((weak,naked)) |
| + _exit( int code ) |
| +{ |
| + T2H_SYSCALL(T2H_SYSCALL_EXIT); |
| + while (1); |
| +} |
| + |
| +int __attribute__((weak,naked)) |
| + _open (char *pathname, int flags, int mode) |
| +{ |
| + T2H_SYSCALL(T2H_SYSCALL_OPEN); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak,naked)) |
| + _close (int file) |
| +{ |
| + T2H_SYSCALL(T2H_SYSCALL_CLOSE); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak,naked)) |
| + _lseek( int filedes, int offset, int whence ) |
| +{ |
| + T2H_SYSCALL(T2H_SYSCALL_LSEEK); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| + |
| +int __attribute__((weak,naked)) |
| + _read (int file, |
| + char * ptr, |
| + int len){ |
| + T2H_SYSCALL(T2H_SYSCALL_READ); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak,naked)) |
| + _write (int file, |
| + char * ptr, |
| + int len){ |
| + T2H_SYSCALL(T2H_SYSCALL_WRITE); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak,naked)) |
| + isatty (int desc){ |
| + T2H_SYSCALL(T2H_SYSCALL_ISATTY); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +static void _convert_host2target_stat(struct stat *target_stat, struct host_stat *host_stat) |
| +{ |
| + target_stat->st_dev = (dev_t)host_stat->st_dev; |
| + target_stat->st_ino = (ino_t)host_stat->st_ino; |
| + target_stat->st_mode = (mode_t)host_stat->st_mode; |
| + target_stat->st_nlink = (nlink_t)host_stat->st_nlink; |
| + target_stat->st_uid = (uid_t)host_stat->st_uid; |
| + target_stat->st_gid = (gid_t)host_stat->st_gid; |
| + target_stat->st_rdev = (dev_t)host_stat->st_rdev; |
| + target_stat->st_size = (off_t)host_stat->st_size; |
| + target_stat->st_blksize = (long)host_stat->st_blksize; |
| + target_stat->st_blocks = (long)host_stat->st_blocks; |
| + target_stat->st_atime = (time_t)host_stat->st_atime; |
| + target_stat->st_mtime = (time_t)host_stat->st_mtime; |
| + target_stat->st_ctime = (time_t)host_stat->st_ctime; |
| +} |
| + |
| +int __attribute__((naked)) |
| + _fstat_host (int filedes, struct host_stat *ptr){ |
| + T2H_SYSCALL(T2H_SYSCALL_FSTAT); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((naked)) |
| + _stat_host (const char *filename, struct host_stat *ptr){ |
| + T2H_SYSCALL(T2H_SYSCALL_STAT); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak)) |
| + _fstat (int filedes, struct stat *stat){ |
| + struct host_stat host_stat; |
| + if ( _fstat_host (filedes, &host_stat) < 0 ) |
| + return -1; |
| + _convert_host2target_stat (stat, &host_stat); |
| + return 0; |
| +} |
| + |
| +int __attribute__((weak)) |
| + _stat (const char *filename, struct stat *stat){ |
| + struct host_stat host_stat; |
| + if ( _stat_host (filename, &host_stat) < 0) |
| + return -1; |
| + _convert_host2target_stat (stat, &host_stat); |
| + return 0; |
| +} |
| + |
| + |
| +int __attribute__((naked)) |
| + _gettimeofday_host (struct host_timeval *tv, struct timezone *tz){ |
| + T2H_SYSCALL(T2H_SYSCALL_GETTIMEOFDAY); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak)) |
| + _gettimeofday (struct timeval *tv, struct timezone *tz){ |
| + struct host_timeval host_tv; |
| + if ( _gettimeofday_host (&host_tv, tz) < 0 ) |
| + return -1; |
| + tv->tv_sec = (long)host_tv.tv_sec; |
| + tv->tv_usec = (long)host_tv.tv_usec; |
| + return 0; |
| +} |
| + |
| +int __attribute__((weak,naked)) |
| + _unlink (const char *path){ |
| + T2H_SYSCALL(T2H_SYSCALL_UNLINK); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak,naked)) |
| + _system (const char *command){ |
| + T2H_SYSCALL(T2H_SYSCALL_SYSTEM); |
| + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); |
| +} |
| + |
| +int __attribute__((weak)) |
| + _execve (){ |
| + return -1; |
| +} |
| + |
| + |
| +int __attribute__((weak)) |
| + _fork (){ |
| + return -1; |
| +} |
| + |
| +int __attribute__((weak)) |
| + _wait (){ |
| + return -1; |
| +} |
| + |
| +int __attribute__((weak)) |
| + sigfillset (){ |
| + return -1; |
| +} |
| + |
| +int __attribute__((weak)) |
| + sigprocmask (){ |
| + return -1; |
| +} |
| + |
| +int __attribute__((weak)) |
| + _fcntl (){ |
| + return -1; |
| +} |
| + |
| +int __attribute__((weak)) |
| + _link (){ |
| + return -1; |
| +} |
| + |
| +int __attribute__((weak)) |
| + _kill (){ |
| + return -1; |
| +} |
| + |
| +int __attribute__((weak)) |
| + _getpid (){ |
| + return -1; |
| +} |
| diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h |
| --- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h 1970-01-01 01:00:00.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h 2009-05-22 09:57:50.000000000 +0200 |
| @@ -0,0 +1,72 @@ |
| +#ifndef __SYSCALLS_H__ |
| +#define __SYSCALLS_H__ |
| + |
| +#include <sys/stat.h> |
| +#include <errno.h> |
| + |
| +struct host_stat { |
| + unsigned int st_dev; /* device */ |
| + unsigned int st_ino; /* inode */ |
| + mode_t st_mode; /* protection */ |
| + unsigned int st_nlink; /* number of hard links */ |
| + unsigned int st_uid; /* user ID of owner */ |
| + unsigned int st_gid; /* group ID of owner */ |
| + unsigned int st_rdev; /* device type (if inode device) */ |
| + unsigned long long st_size; /* total size, in bytes */ |
| + unsigned long long st_blksize; /* blocksize for filesystem I/O */ |
| + unsigned long long st_blocks; /* number of blocks allocated */ |
| + time_t st_atime; /* time of last access */ |
| + time_t st_mtime; /* time of last modification */ |
| + time_t st_ctime; /* time of last change */ |
| +}; |
| + |
| +struct host_timeval { |
| + time_t tv_sec; |
| + long long tv_usec; |
| +}; |
| + |
| + |
| +#define T2H_SYSCALL_OPEN 1 |
| +#define T2H_SYSCALL_CLOSE 2 |
| +#define T2H_SYSCALL_READ 3 |
| +#define T2H_SYSCALL_WRITE 4 |
| +#define T2H_SYSCALL_LSEEK 5 |
| +#define T2H_SYSCALL_RENAME 6 |
| +#define T2H_SYSCALL_UNLINK 7 |
| +#define T2H_SYSCALL_STAT 8 |
| +#define T2H_SYSCALL_FSTAT 9 |
| +#define T2H_SYSCALL_GETTIMEOFDAY 10 |
| +#define T2H_SYSCALL_ISATTY 11 |
| +#define T2H_SYSCALL_SYSTEM 12 |
| +#define T2H_SYSCALL_EXIT 13 |
| +#define T2H_SYSCALL_INIT_ARGV 14 |
| + |
| + |
| +/* The breakpoint/mov r12,-1/mov r11,... pattern causes |
| + the debugger to be able to recognize the system call. |
| + If the debug system is not enabled then the breakpoint |
| + is executed as a nop and r12 set to -1 and errno to |
| + ENOSYS. The debugger is responsible for setting r12 |
| + and r11 and skipping the instructions after the breakpoint |
| + which would otherwise set these registers. |
| +*/ |
| +#define T2H_SYSCALL(syscall_code) \ |
| + asm ("mov r8, %0\n" \ |
| + "breakpoint\n" \ |
| + "mov r12, -1\n" \ |
| + "mov r11, %1\n" \ |
| + :: "i" (syscall_code), "i" (ENOSYS) ); |
| + |
| +#define T2H_SYSCALL_CHECK_ERROR_AND_RETURN() \ |
| + asm ("cp.w r12, 0\n" \ |
| + "retge r12\n" \ |
| + "lda.w r10, errno\n" \ |
| + "st.w r10[0], r11\n" \ |
| + "ret r12\n" \ |
| + ".align 2\n" \ |
| + ".cpool\n"); |
| + |
| +#define T2H_SYSCALL_RETURN() \ |
| + asm ("ret r12\n"); |
| + |
| +#endif |
| diff -Naur newlib-1.17.0/newlib/libc/sys/configure newlib-1.17.0-new/newlib/libc/sys/configure |
| --- newlib-1.17.0/newlib/libc/sys/configure 2008-12-22 20:45:49.000000000 +0100 |
| +++ newlib-1.17.0-new/newlib/libc/sys/configure 2009-05-22 09:57:50.000000000 +0200 |
| @@ -1,25 +1,54 @@ |
| #! /bin/sh |
| # Guess values for system-dependent variables and create Makefiles. |
| -# Generated by GNU Autoconf 2.59 for newlib 1.17.0. |
| +# Generated by GNU Autoconf 2.61 for newlib 1.17.0. |
| # |
| -# Copyright (C) 2003 Free Software Foundation, Inc. |
| +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| # This configure script is free software; the Free Software Foundation |
| # gives unlimited permission to copy, distribute and modify it. |
| ## --------------------- ## |
| ## M4sh Initialization. ## |
| ## --------------------- ## |
| |
| -# Be Bourne compatible |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then |
| - set -o posix |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| fi |
| -DUALCASE=1; export DUALCASE # for MKS sh |
| |
| # Support unset when possible. |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| @@ -29,8 +58,43 @@ |
| fi |
| |
| |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| # Work around bugs in pre-3.0 UWIN ksh. |
| -$as_unset ENV MAIL MAILPATH |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| PS1='$ ' |
| PS2='> ' |
| PS4='+ ' |
| @@ -44,18 +108,19 @@ |
| if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| eval $as_var=C; export $as_var |
| else |
| - $as_unset $as_var |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| fi |
| done |
| |
| # Required to use basename. |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| as_basename=basename |
| else |
| as_basename=false |
| @@ -63,157 +128,388 @@ |
| |
| |
| # Name of the executable. |
| -as_me=`$as_basename "$0" || |
| +as_me=`$as_basename -- "$0" || |
| $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| - X"$0" : 'X\(/\)$' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X/"$0" | |
| - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } |
| - /^X\/\(\/\/\)$/{ s//\1/; q; } |
| - /^X\/\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| |
| +# CDPATH. |
| +$as_unset CDPATH |
| |
| -# PATH needs CR, and LINENO needs CR and PATH. |
| -# Avoid depending upon Character Ranges. |
| -as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| -as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| -as_cr_digits='0123456789' |
| -as_cr_alnum=$as_cr_Letters$as_cr_digits |
| |
| -# The user is always right. |
| -if test "${PATH_SEPARATOR+set}" != set; then |
| - echo "#! /bin/sh" >conf$$.sh |
| - echo "exit 0" >>conf$$.sh |
| - chmod +x conf$$.sh |
| - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| - PATH_SEPARATOR=';' |
| - else |
| - PATH_SEPARATOR=: |
| - fi |
| - rm -f conf$$.sh |
| +if test "x$CONFIG_SHELL" = x; then |
| + if (eval ":") 2>/dev/null; then |
| + as_have_required=yes |
| +else |
| + as_have_required=no |
| fi |
| |
| + if test $as_have_required = yes && (eval ": |
| +(as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| |
| - as_lineno_1=$LINENO |
| - as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| - test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" || { |
| - # Find who we are. Look in the path if we contain no path at all |
| - # relative or not. |
| - case $0 in |
| - *[\\/]* ) as_myself=$0 ;; |
| - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in $PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| -done |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| |
| - ;; |
| - esac |
| - # We did not find ourselves, most probably we were run as `sh COMMAND' |
| - # in which case we are not to be found in the path. |
| - if test "x$as_myself" = x; then |
| - as_myself=$0 |
| - fi |
| - if test ! -f "$as_myself"; then |
| - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 |
| - { (exit 1); exit 1; }; } |
| - fi |
| - case $CONFIG_SHELL in |
| - '') |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| + as_lineno_1=\$LINENO |
| + as_lineno_2=\$LINENO |
| + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && |
| + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } |
| +") 2> /dev/null; then |
| + : |
| +else |
| + as_candidate_shells= |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| - for as_base in sh bash ksh sh5; do |
| - case $as_dir in |
| + case $as_dir in |
| /*) |
| - if ("$as_dir/$as_base" -c ' |
| + for as_base in sh bash ksh sh5; do |
| + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" |
| + done;; |
| + esac |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| + for as_shell in $as_candidate_shells $SHELL; do |
| + # Try only shells that exist, to save several forks. |
| + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && |
| + { ("$as_shell") 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +_ASEOF |
| +}; then |
| + CONFIG_SHELL=$as_shell |
| + as_have_required=yes |
| + if { "$as_shell" 2> /dev/null <<\_ASEOF |
| +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| + emulate sh |
| + NULLCMD=: |
| + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| + # is contrary to our usage. Disable this feature. |
| + alias -g '${1+"$@"}'='"$@"' |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| +: |
| +(as_func_return () { |
| + (exit $1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = "$1" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test $exitcode = 0) || { (exit 1); exit 1; } |
| + |
| +( |
| as_lineno_1=$LINENO |
| as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then |
| - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } |
| - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } |
| - CONFIG_SHELL=$as_dir/$as_base |
| - export CONFIG_SHELL |
| - exec "$CONFIG_SHELL" "$0" ${1+"$@"} |
| - fi;; |
| - esac |
| - done |
| -done |
| -;; |
| - esac |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } |
| + |
| +_ASEOF |
| +}; then |
| + break |
| +fi |
| + |
| +fi |
| + |
| + done |
| + |
| + if test "x$CONFIG_SHELL" != x; then |
| + for as_var in BASH_ENV ENV |
| + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| + done |
| + export CONFIG_SHELL |
| + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} |
| +fi |
| + |
| + |
| + if test $as_have_required = no; then |
| + echo This script requires a shell more modern than all the |
| + echo shells that I found on your system. Please install a |
| + echo modern shell, or manually run the script under such a |
| + echo shell if you do have one. |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| + |
| +fi |
| + |
| +fi |
| + |
| + |
| + |
| +(eval "as_func_return () { |
| + (exit \$1) |
| +} |
| +as_func_success () { |
| + as_func_return 0 |
| +} |
| +as_func_failure () { |
| + as_func_return 1 |
| +} |
| +as_func_ret_success () { |
| + return 0 |
| +} |
| +as_func_ret_failure () { |
| + return 1 |
| +} |
| + |
| +exitcode=0 |
| +if as_func_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_success failed. |
| +fi |
| + |
| +if as_func_failure; then |
| + exitcode=1 |
| + echo as_func_failure succeeded. |
| +fi |
| + |
| +if as_func_ret_success; then |
| + : |
| +else |
| + exitcode=1 |
| + echo as_func_ret_success failed. |
| +fi |
| + |
| +if as_func_ret_failure; then |
| + exitcode=1 |
| + echo as_func_ret_failure succeeded. |
| +fi |
| + |
| +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| + : |
| +else |
| + exitcode=1 |
| + echo positional parameters were not saved. |
| +fi |
| + |
| +test \$exitcode = 0") || { |
| + echo No shell found that supports shell functions. |
| + echo Please tell autoconf@gnu.org about your system, |
| + echo including any error possibly output before this |
| + echo message |
| +} |
| + |
| + |
| + |
| + as_lineno_1=$LINENO |
| + as_lineno_2=$LINENO |
| + test "x$as_lineno_1" != "x$as_lineno_2" && |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| |
| # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| # uniformly replaced by the line number. The first 'sed' inserts a |
| - # line-number line before each line; the second 'sed' does the real |
| - # work. The second script uses 'N' to pair each line-number line |
| - # with the numbered line, and appends trailing '-' during |
| - # substitution so that $LINENO is not a special case at line end. |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) |
| - sed '=' <$as_myself | |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| N |
| - s,$,-, |
| - : loop |
| - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| t loop |
| - s,-$,, |
| - s,^['$as_cr_digits']*\n,, |
| + s/-\n.*// |
| ' >$as_me.lineno && |
| - chmod +x $as_me.lineno || |
| + chmod +x "$as_me.lineno" || |
| { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| { (exit 1); exit 1; }; } |
| |
| # Don't try to exec as it changes $[0], causing all sort of problems |
| # (the dirname of $[0] is not the place where we might find the |
| - # original and so on. Autoconf is especially sensible to this). |
| - . ./$as_me.lineno |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| # Exit status is that of the last command. |
| exit |
| } |
| |
| |
| -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in |
| - *c*,-n*) ECHO_N= ECHO_C=' |
| -' ECHO_T=' ' ;; |
| - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; |
| - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| esac |
| |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| echo >conf$$.file |
| if ln -s conf$$.file conf$$ 2>/dev/null; then |
| - # We could just check for DJGPP; but this test a) works b) is more generic |
| - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). |
| - if test -f conf$$.exe; then |
| - # Don't use ln at all; we don't have any links |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| as_ln_s='cp -p' |
| - else |
| - as_ln_s='ln -s' |
| - fi |
| elif ln conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s=ln |
| else |
| as_ln_s='cp -p' |
| fi |
| -rm -f conf$$ conf$$.exe conf$$.file |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| |
| if mkdir -p . 2>/dev/null; then |
| as_mkdir_p=: |
| @@ -222,7 +518,28 @@ |
| as_mkdir_p=false |
| fi |
| |
| -as_executable_p="test -f" |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| |
| # Sed expression to map a string onto a valid CPP name. |
| as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| @@ -231,15 +548,6 @@ |
| as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| |
| |
| -# IFS |
| -# We need space, tab and new line, in precisely that order. |
| -as_nl=' |
| -' |
| -IFS=" $as_nl" |
| - |
| -# CDPATH. |
| -$as_unset CDPATH |
| - |
| |
| |
| # Check that we are running under the correct shell. |
| @@ -390,29 +698,26 @@ |
| |
| |
| |
| +exec 7<&0 </dev/null 6>&1 |
| + |
| # Name of the host. |
| # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, |
| # so uname gets run too. |
| ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` |
| |
| -exec 6>&1 |
| - |
| # |
| # Initializations. |
| # |
| ac_default_prefix=/usr/local |
| +ac_clean_files= |
| ac_config_libobj_dir=. |
| +LIBOBJS= |
| cross_compiling=no |
| subdirs= |
| MFLAGS= |
| MAKEFLAGS= |
| SHELL=${CONFIG_SHELL-/bin/sh} |
| |
| -# Maximum number of lines to put in a shell here document. |
| -# This variable seems obsolete. It should probably be removed, and |
| -# only ac_max_sed_lines should be used. |
| -: ${ac_max_here_lines=38} |
| - |
| # Identity of this package. |
| PACKAGE_NAME='newlib' |
| PACKAGE_TARNAME='newlib' |
| @@ -424,66 +729,214 @@ |
| # Factoring default headers for most tests. |
| ac_includes_default="\ |
| #include <stdio.h> |
| -#if HAVE_SYS_TYPES_H |
| +#ifdef HAVE_SYS_TYPES_H |
| # include <sys/types.h> |
| #endif |
| -#if HAVE_SYS_STAT_H |
| +#ifdef HAVE_SYS_STAT_H |
| # include <sys/stat.h> |
| #endif |
| -#if STDC_HEADERS |
| +#ifdef STDC_HEADERS |
| # include <stdlib.h> |
| # include <stddef.h> |
| #else |
| -# if HAVE_STDLIB_H |
| +# ifdef HAVE_STDLIB_H |
| # include <stdlib.h> |
| # endif |
| #endif |
| -#if HAVE_STRING_H |
| -# if !STDC_HEADERS && HAVE_MEMORY_H |
| +#ifdef HAVE_STRING_H |
| +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H |
| # include <memory.h> |
| # endif |
| # include <string.h> |
| #endif |
| -#if HAVE_STRINGS_H |
| +#ifdef HAVE_STRINGS_H |
| # include <strings.h> |
| #endif |
| -#if HAVE_INTTYPES_H |
| +#ifdef HAVE_INTTYPES_H |
| # include <inttypes.h> |
| -#else |
| -# if HAVE_STDINT_H |
| -# include <stdint.h> |
| -# endif |
| #endif |
| -#if HAVE_UNISTD_H |
| +#ifdef HAVE_STDINT_H |
| +# include <stdint.h> |
| +#endif |
| +#ifdef HAVE_UNISTD_H |
| # include <unistd.h> |
| #endif" |
| |
| -ac_subdirs_all="$ac_subdirs_all a29khif" |
| -ac_subdirs_all="$ac_subdirs_all arc" |
| -ac_subdirs_all="$ac_subdirs_all arm" |
| -ac_subdirs_all="$ac_subdirs_all d10v" |
| -ac_subdirs_all="$ac_subdirs_all decstation" |
| -ac_subdirs_all="$ac_subdirs_all h8300hms" |
| -ac_subdirs_all="$ac_subdirs_all h8500hms" |
| -ac_subdirs_all="$ac_subdirs_all linux" |
| -ac_subdirs_all="$ac_subdirs_all m88kbug" |
| -ac_subdirs_all="$ac_subdirs_all mmixware" |
| -ac_subdirs_all="$ac_subdirs_all netware" |
| -ac_subdirs_all="$ac_subdirs_all rdos" |
| -ac_subdirs_all="$ac_subdirs_all rtems" |
| -ac_subdirs_all="$ac_subdirs_all sh" |
| -ac_subdirs_all="$ac_subdirs_all sparc64" |
| -ac_subdirs_all="$ac_subdirs_all sun4" |
| -ac_subdirs_all="$ac_subdirs_all sysmec" |
| -ac_subdirs_all="$ac_subdirs_all sysnec810" |
| -ac_subdirs_all="$ac_subdirs_all sysnecv850" |
| -ac_subdirs_all="$ac_subdirs_all sysvi386" |
| -ac_subdirs_all="$ac_subdirs_all sysvnecv70" |
| -ac_subdirs_all="$ac_subdirs_all tic80" |
| -ac_subdirs_all="$ac_subdirs_all w65" |
| -ac_subdirs_all="$ac_subdirs_all z8ksim" |
| -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs CRT0 HAVE_SYS_DIR_TRUE HAVE_SYS_DIR_FALSE LIBOBJS LTLIBOBJS' |
| +ac_subst_vars='SHELL |
| +PATH_SEPARATOR |
| +PACKAGE_NAME |
| +PACKAGE_TARNAME |
| +PACKAGE_VERSION |
| +PACKAGE_STRING |
| +PACKAGE_BUGREPORT |
| +exec_prefix |
| +prefix |
| +program_transform_name |
| +bindir |
| +sbindir |
| +libexecdir |
| +datarootdir |
| +datadir |
| +sysconfdir |
| +sharedstatedir |
| +localstatedir |
| +includedir |
| +oldincludedir |
| +docdir |
| +infodir |
| +htmldir |
| +dvidir |
| +pdfdir |
| +psdir |
| +libdir |
| +localedir |
| +mandir |
| +DEFS |
| +ECHO_C |
| +ECHO_N |
| +ECHO_T |
| +LIBS |
| +build_alias |
| +host_alias |
| +target_alias |
| +MAY_SUPPLY_SYSCALLS_TRUE |
| +MAY_SUPPLY_SYSCALLS_FALSE |
| +newlib_basedir |
| +build |
| +build_cpu |
| +build_vendor |
| +build_os |
| +host |
| +host_cpu |
| +host_vendor |
| +host_os |
| +INSTALL_PROGRAM |
| +INSTALL_SCRIPT |
| +INSTALL_DATA |
| +CYGPATH_W |
| +PACKAGE |
| +VERSION |
| +ACLOCAL |
| +AUTOCONF |
| +AUTOMAKE |
| +AUTOHEADER |
| +MAKEINFO |
| +install_sh |
| +STRIP |
| +INSTALL_STRIP_PROGRAM |
| +mkdir_p |
| +AWK |
| +SET_MAKE |
| +am__leading_dot |
| +AMTAR |
| +am__tar |
| +am__untar |
| +CC |
| +DEPDIR |
| +am__include |
| +am__quote |
| +AMDEP_TRUE |
| +AMDEP_FALSE |
| +AMDEPBACKSLASH |
| +CCDEPMODE |
| +am__fastdepCC_TRUE |
| +am__fastdepCC_FALSE |
| +AS |
| +AR |
| +RANLIB |
| +READELF |
| +MAINTAINER_MODE_TRUE |
| +MAINTAINER_MODE_FALSE |
| +MAINT |
| +CCAS |
| +CCASFLAGS |
| +NEWLIB_CFLAGS |
| +LDFLAGS |
| +ELIX_LEVEL_0_TRUE |
| +ELIX_LEVEL_0_FALSE |
| +ELIX_LEVEL_1_TRUE |
| +ELIX_LEVEL_1_FALSE |
| +ELIX_LEVEL_2_TRUE |
| +ELIX_LEVEL_2_FALSE |
| +ELIX_LEVEL_3_TRUE |
| +ELIX_LEVEL_3_FALSE |
| +ELIX_LEVEL_4_TRUE |
| +ELIX_LEVEL_4_FALSE |
| +USE_LIBTOOL_TRUE |
| +USE_LIBTOOL_FALSE |
| +OBJEXT |
| +oext |
| +aext |
| +lpfx |
| +libm_machine_dir |
| +machine_dir |
| +sys_dir |
| +SED |
| +DLLTOOL |
| +OBJDUMP |
| +LIBTOOL |
| +CFLAGS |
| +CPPFLAGS |
| +ac_ct_CC |
| +EXEEXT |
| +GREP |
| +EGREP |
| +FGREP |
| +LD |
| +DUMPBIN |
| +ac_ct_DUMPBIN |
| +NM |
| +LN_S |
| +lt_ECHO |
| +DSYMUTIL |
| +NMEDIT |
| +LIPO |
| +OTOOL |
| +OTOOL64 |
| +CPP |
| +subdirs |
| +CRT0 |
| +HAVE_SYS_DIR_TRUE |
| +HAVE_SYS_DIR_FALSE |
| +LIBOBJS |
| +LTLIBOBJS' |
| ac_subst_files='' |
| + ac_precious_vars='build_alias |
| +host_alias |
| +target_alias |
| +CCAS |
| +CCASFLAGS |
| +CC |
| +CFLAGS |
| +LDFLAGS |
| +LIBS |
| +CPPFLAGS |
| +CPP' |
| +ac_subdirs_all='a29khif |
| +arc |
| +arm |
| +avr32 |
| +d10v |
| +decstation |
| +h8300hms |
| +h8500hms |
| +linux |
| +m88kbug |
| +mmixware |
| +netware |
| +rdos |
| +rtems |
| +sh |
| +sparc64 |
| +sun4 |
| +sysmec |
| +sysnec810 |
| +sysnecv850 |
| +sysvi386 |
| +sysvnecv70 |
| +tic80 |
| +w65 |
| +z8ksim' |
| |
| # Initialize some variables set by options. |
| ac_init_help= |
| @@ -510,34 +963,48 @@ |
| # and all the variables that are supposed to be based on exec_prefix |
| # by default will actually change. |
| # Use braces instead of parens because sh, perl, etc. also accept them. |
| +# (The list follows the same order as the GNU Coding Standards.) |
| bindir='${exec_prefix}/bin' |
| sbindir='${exec_prefix}/sbin' |
| libexecdir='${exec_prefix}/libexec' |
| -datadir='${prefix}/share' |
| +datarootdir='${prefix}/share' |
| +datadir='${datarootdir}' |
| sysconfdir='${prefix}/etc' |
| sharedstatedir='${prefix}/com' |
| localstatedir='${prefix}/var' |
| -libdir='${exec_prefix}/lib' |
| includedir='${prefix}/include' |
| oldincludedir='/usr/include' |
| -infodir='${prefix}/info' |
| -mandir='${prefix}/man' |
| +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' |
| +infodir='${datarootdir}/info' |
| +htmldir='${docdir}' |
| +dvidir='${docdir}' |
| +pdfdir='${docdir}' |
| +psdir='${docdir}' |
| +libdir='${exec_prefix}/lib' |
| +localedir='${datarootdir}/locale' |
| +mandir='${datarootdir}/man' |
| |
| ac_prev= |
| +ac_dashdash= |
| for ac_option |
| do |
| # If the previous option needs an argument, assign it. |
| if test -n "$ac_prev"; then |
| - eval "$ac_prev=\$ac_option" |
| + eval $ac_prev=\$ac_option |
| ac_prev= |
| continue |
| fi |
| |
| - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` |
| + case $ac_option in |
| + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; |
| + *) ac_optarg=yes ;; |
| + esac |
| |
| # Accept the important Cygnus configure options, so we can diagnose typos. |
| |
| - case $ac_option in |
| + case $ac_dashdash$ac_option in |
| + --) |
| + ac_dashdash=yes ;; |
| |
| -bindir | --bindir | --bindi | --bind | --bin | --bi) |
| ac_prev=bindir ;; |
| @@ -559,33 +1026,45 @@ |
| --config-cache | -C) |
| cache_file=config.cache ;; |
| |
| - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) |
| + -datadir | --datadir | --datadi | --datad) |
| ac_prev=datadir ;; |
| - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ |
| - | --da=*) |
| + -datadir=* | --datadir=* | --datadi=* | --datad=*) |
| datadir=$ac_optarg ;; |
| |
| + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ |
| + | --dataroo | --dataro | --datar) |
| + ac_prev=datarootdir ;; |
| + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ |
| + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) |
| + datarootdir=$ac_optarg ;; |
| + |
| -disable-* | --disable-*) |
| ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_feature=`echo $ac_feature | sed 's/-/_/g'` |
| - eval "enable_$ac_feature=no" ;; |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=no ;; |
| + |
| + -docdir | --docdir | --docdi | --doc | --do) |
| + ac_prev=docdir ;; |
| + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) |
| + docdir=$ac_optarg ;; |
| + |
| + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) |
| + ac_prev=dvidir ;; |
| + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) |
| + dvidir=$ac_optarg ;; |
| |
| -enable-* | --enable-*) |
| ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_feature=`echo $ac_feature | sed 's/-/_/g'` |
| - case $ac_option in |
| - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; |
| - *) ac_optarg=yes ;; |
| - esac |
| - eval "enable_$ac_feature='$ac_optarg'" ;; |
| + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| + eval enable_$ac_feature=\$ac_optarg ;; |
| |
| -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| @@ -612,6 +1091,12 @@ |
| -host=* | --host=* | --hos=* | --ho=*) |
| host_alias=$ac_optarg ;; |
| |
| + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) |
| + ac_prev=htmldir ;; |
| + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ |
| + | --ht=*) |
| + htmldir=$ac_optarg ;; |
| + |
| -includedir | --includedir | --includedi | --included | --include \ |
| | --includ | --inclu | --incl | --inc) |
| ac_prev=includedir ;; |
| @@ -636,13 +1121,16 @@ |
| | --libexe=* | --libex=* | --libe=*) |
| libexecdir=$ac_optarg ;; |
| |
| + -localedir | --localedir | --localedi | --localed | --locale) |
| + ac_prev=localedir ;; |
| + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) |
| + localedir=$ac_optarg ;; |
| + |
| -localstatedir | --localstatedir | --localstatedi | --localstated \ |
| - | --localstate | --localstat | --localsta | --localst \ |
| - | --locals | --local | --loca | --loc | --lo) |
| + | --localstate | --localstat | --localsta | --localst | --locals) |
| ac_prev=localstatedir ;; |
| -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ |
| - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) |
| + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) |
| localstatedir=$ac_optarg ;; |
| |
| -mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
| @@ -707,6 +1195,16 @@ |
| | --progr-tra=* | --program-tr=* | --program-t=*) |
| program_transform_name=$ac_optarg ;; |
| |
| + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) |
| + ac_prev=pdfdir ;; |
| + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) |
| + pdfdir=$ac_optarg ;; |
| + |
| + -psdir | --psdir | --psdi | --psd | --ps) |
| + ac_prev=psdir ;; |
| + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) |
| + psdir=$ac_optarg ;; |
| + |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil) |
| silent=yes ;; |
| @@ -759,24 +1257,20 @@ |
| -with-* | --with-*) |
| ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_package=`echo $ac_package| sed 's/-/_/g'` |
| - case $ac_option in |
| - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; |
| - *) ac_optarg=yes ;; |
| - esac |
| - eval "with_$ac_package='$ac_optarg'" ;; |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=\$ac_optarg ;; |
| |
| -without-* | --without-*) |
| ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` |
| # Reject names that are not valid shell variable names. |
| - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && |
| + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_package=`echo $ac_package | sed 's/-/_/g'` |
| - eval "with_$ac_package=no" ;; |
| + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| + eval with_$ac_package=no ;; |
| |
| --x) |
| # Obsolete; use --with-x. |
| @@ -807,8 +1301,7 @@ |
| expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 |
| { (exit 1); exit 1; }; } |
| - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` |
| - eval "$ac_envvar='$ac_optarg'" |
| + eval $ac_envvar=\$ac_optarg |
| export $ac_envvar ;; |
| |
| *) |
| @@ -828,27 +1321,19 @@ |
| { (exit 1); exit 1; }; } |
| fi |
| |
| -# Be sure to have absolute paths. |
| -for ac_var in exec_prefix prefix |
| -do |
| - eval ac_val=$`echo $ac_var` |
| - case $ac_val in |
| - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; |
| - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| - { (exit 1); exit 1; }; };; |
| - esac |
| -done |
| - |
| -# Be sure to have absolute paths. |
| -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ |
| - localstatedir libdir includedir oldincludedir infodir mandir |
| +# Be sure to have absolute directory names. |
| +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ |
| + datadir sysconfdir sharedstatedir localstatedir includedir \ |
| + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ |
| + libdir localedir mandir |
| do |
| - eval ac_val=$`echo $ac_var` |
| + eval ac_val=\$$ac_var |
| case $ac_val in |
| - [\\/$]* | ?:[\\/]* ) ;; |
| - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| - { (exit 1); exit 1; }; };; |
| + [\\/$]* | ?:[\\/]* ) continue;; |
| + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; |
| esac |
| + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| + { (exit 1); exit 1; }; } |
| done |
| |
| # There might be people who depend on the old broken behavior: `$host' |
| @@ -875,82 +1360,76 @@ |
| test "$silent" = yes && exec 6>/dev/null |
| |
| |
| +ac_pwd=`pwd` && test -n "$ac_pwd" && |
| +ac_ls_di=`ls -di .` && |
| +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || |
| + { echo "$as_me: error: Working directory cannot be determined" >&2 |
| + { (exit 1); exit 1; }; } |
| +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || |
| + { echo "$as_me: error: pwd does not report name of working directory" >&2 |
| + { (exit 1); exit 1; }; } |
| + |
| + |
| # Find the source files, if location was not specified. |
| if test -z "$srcdir"; then |
| ac_srcdir_defaulted=yes |
| - # Try the directory containing this script, then its parent. |
| - ac_confdir=`(dirname "$0") 2>/dev/null || |
| + # Try the directory containing this script, then the parent directory. |
| + ac_confdir=`$as_dirname -- "$0" || |
| $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$0" : 'X\(//\)[^/]' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| - X"$0" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$0" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| srcdir=$ac_confdir |
| - if test ! -r $srcdir/$ac_unique_file; then |
| + if test ! -r "$srcdir/$ac_unique_file"; then |
| srcdir=.. |
| fi |
| else |
| ac_srcdir_defaulted=no |
| fi |
| -if test ! -r $srcdir/$ac_unique_file; then |
| - if test "$ac_srcdir_defaulted" = yes; then |
| - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 |
| - { (exit 1); exit 1; }; } |
| - else |
| - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
| - { (exit 1); exit 1; }; } |
| - fi |
| -fi |
| -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || |
| - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 |
| - { (exit 1); exit 1; }; } |
| -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` |
| -ac_env_build_alias_set=${build_alias+set} |
| -ac_env_build_alias_value=$build_alias |
| -ac_cv_env_build_alias_set=${build_alias+set} |
| -ac_cv_env_build_alias_value=$build_alias |
| -ac_env_host_alias_set=${host_alias+set} |
| -ac_env_host_alias_value=$host_alias |
| -ac_cv_env_host_alias_set=${host_alias+set} |
| -ac_cv_env_host_alias_value=$host_alias |
| -ac_env_target_alias_set=${target_alias+set} |
| -ac_env_target_alias_value=$target_alias |
| -ac_cv_env_target_alias_set=${target_alias+set} |
| -ac_cv_env_target_alias_value=$target_alias |
| -ac_env_CCAS_set=${CCAS+set} |
| -ac_env_CCAS_value=$CCAS |
| -ac_cv_env_CCAS_set=${CCAS+set} |
| -ac_cv_env_CCAS_value=$CCAS |
| -ac_env_CCASFLAGS_set=${CCASFLAGS+set} |
| -ac_env_CCASFLAGS_value=$CCASFLAGS |
| -ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set} |
| -ac_cv_env_CCASFLAGS_value=$CCASFLAGS |
| -ac_env_CC_set=${CC+set} |
| -ac_env_CC_value=$CC |
| -ac_cv_env_CC_set=${CC+set} |
| -ac_cv_env_CC_value=$CC |
| -ac_env_CFLAGS_set=${CFLAGS+set} |
| -ac_env_CFLAGS_value=$CFLAGS |
| -ac_cv_env_CFLAGS_set=${CFLAGS+set} |
| -ac_cv_env_CFLAGS_value=$CFLAGS |
| -ac_env_LDFLAGS_set=${LDFLAGS+set} |
| -ac_env_LDFLAGS_value=$LDFLAGS |
| -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} |
| -ac_cv_env_LDFLAGS_value=$LDFLAGS |
| -ac_env_CPPFLAGS_set=${CPPFLAGS+set} |
| -ac_env_CPPFLAGS_value=$CPPFLAGS |
| -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} |
| -ac_cv_env_CPPFLAGS_value=$CPPFLAGS |
| -ac_env_CPP_set=${CPP+set} |
| -ac_env_CPP_value=$CPP |
| -ac_cv_env_CPP_set=${CPP+set} |
| -ac_cv_env_CPP_value=$CPP |
| +if test ! -r "$srcdir/$ac_unique_file"; then |
| + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." |
| + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
| + { (exit 1); exit 1; }; } |
| +fi |
| +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" |
| +ac_abs_confdir=`( |
| + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 |
| + { (exit 1); exit 1; }; } |
| + pwd)` |
| +# When building in place, set srcdir=. |
| +if test "$ac_abs_confdir" = "$ac_pwd"; then |
| + srcdir=. |
| +fi |
| +# Remove unnecessary trailing slashes from srcdir. |
| +# Double slashes in file names in object file debugging info |
| +# mess up M-x gdb in Emacs. |
| +case $srcdir in |
| +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; |
| +esac |
| +for ac_var in $ac_precious_vars; do |
| + eval ac_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_env_${ac_var}_value=\$${ac_var} |
| + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} |
| + eval ac_cv_env_${ac_var}_value=\$${ac_var} |
| +done |
| |
| # |
| # Report the --help message. |
| @@ -979,9 +1458,6 @@ |
| -n, --no-create do not create output files |
| --srcdir=DIR find the sources in DIR [configure dir or \`..'] |
| |
| -_ACEOF |
| - |
| - cat <<_ACEOF |
| Installation directories: |
| --prefix=PREFIX install architecture-independent files in PREFIX |
| [$ac_default_prefix] |
| @@ -999,15 +1475,22 @@ |
| --bindir=DIR user executables [EPREFIX/bin] |
| --sbindir=DIR system admin executables [EPREFIX/sbin] |
| --libexecdir=DIR program executables [EPREFIX/libexec] |
| - --datadir=DIR read-only architecture-independent data [PREFIX/share] |
| --sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
| --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
| --localstatedir=DIR modifiable single-machine data [PREFIX/var] |
| --libdir=DIR object code libraries [EPREFIX/lib] |
| --includedir=DIR C header files [PREFIX/include] |
| --oldincludedir=DIR C header files for non-gcc [/usr/include] |
| - --infodir=DIR info documentation [PREFIX/info] |
| - --mandir=DIR man documentation [PREFIX/man] |
| + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] |
| + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] |
| + --infodir=DIR info documentation [DATAROOTDIR/info] |
| + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] |
| + --mandir=DIR man documentation [DATAROOTDIR/man] |
| + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] |
| + --htmldir=DIR html documentation [DOCDIR] |
| + --dvidir=DIR dvi documentation [DOCDIR] |
| + --pdfdir=DIR pdf documentation [DOCDIR] |
| + --psdir=DIR ps documentation [DOCDIR] |
| _ACEOF |
| |
| cat <<\_ACEOF |
| @@ -1044,10 +1527,8 @@ |
| --enable-dependency-tracking do not reject slow dependency extractors |
| --enable-maintainer-mode enable make rules and dependencies not useful |
| (and sometimes confusing) to the casual installer |
| - --enable-shared[=PKGS] |
| - build shared libraries [default=yes] |
| - --enable-static[=PKGS] |
| - build static libraries [default=yes] |
| + --enable-shared[=PKGS] build shared libraries [default=yes] |
| + --enable-static[=PKGS] build static libraries [default=yes] |
| --enable-fast-install[=PKGS] |
| optimize for fast installation [default=yes] |
| --disable-libtool-lock avoid locking (might break parallel builds) |
| @@ -1066,128 +1547,95 @@ |
| CFLAGS C compiler flags |
| LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a |
| nonstandard directory <lib dir> |
| - CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have |
| - headers in a nonstandard directory <include dir> |
| + LIBS libraries to pass to the linker, e.g. -l<library> |
| + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if |
| + you have headers in a nonstandard directory <include dir> |
| CPP C preprocessor |
| |
| Use these variables to override the choices made by `configure' or to help |
| it to find libraries and programs with nonstandard names/locations. |
| |
| _ACEOF |
| +ac_status=$? |
| fi |
| |
| if test "$ac_init_help" = "recursive"; then |
| # If there are subdirs, report their specific --help. |
| - ac_popdir=`pwd` |
| for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue |
| - test -d $ac_dir || continue |
| + test -d "$ac_dir" || continue |
| ac_builddir=. |
| |
| -if test "$ac_dir" != .; then |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| + .) # We are building in place. |
| ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| - |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| - cd $ac_dir |
| - # Check for guested configure; otherwise get Cygnus style configure. |
| - if test -f $ac_srcdir/configure.gnu; then |
| - echo |
| - $SHELL $ac_srcdir/configure.gnu --help=recursive |
| - elif test -f $ac_srcdir/configure; then |
| - echo |
| - $SHELL $ac_srcdir/configure --help=recursive |
| - elif test -f $ac_srcdir/configure.ac || |
| - test -f $ac_srcdir/configure.in; then |
| - echo |
| - $ac_configure --help |
| + cd "$ac_dir" || { ac_status=$?; continue; } |
| + # Check for guested configure. |
| + if test -f "$ac_srcdir/configure.gnu"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure.gnu" --help=recursive |
| + elif test -f "$ac_srcdir/configure"; then |
| + echo && |
| + $SHELL "$ac_srcdir/configure" --help=recursive |
| else |
| echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 |
| - fi |
| - cd $ac_popdir |
| + fi || ac_status=$? |
| + cd "$ac_pwd" || { ac_status=$?; break; } |
| done |
| fi |
| |
| -test -n "$ac_init_help" && exit 0 |
| +test -n "$ac_init_help" && exit $ac_status |
| if $ac_init_version; then |
| cat <<\_ACEOF |
| newlib configure 1.17.0 |
| -generated by GNU Autoconf 2.59 |
| +generated by GNU Autoconf 2.61 |
| |
| -Copyright (C) 2003 Free Software Foundation, Inc. |
| +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| This configure script is free software; the Free Software Foundation |
| gives unlimited permission to copy, distribute and modify it. |
| _ACEOF |
| - exit 0 |
| + exit |
| fi |
| -exec 5>config.log |
| -cat >&5 <<_ACEOF |
| +cat >config.log <<_ACEOF |
| This file contains any messages produced by compilers while |
| running configure, to aid debugging if configure makes a mistake. |
| |
| It was created by newlib $as_me 1.17.0, which was |
| -generated by GNU Autoconf 2.59. Invocation command line was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| |
| $ $0 $@ |
| |
| _ACEOF |
| +exec 5>>config.log |
| { |
| cat <<_ASUNAME |
| ## --------- ## |
| @@ -1206,7 +1654,7 @@ |
| /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` |
| /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` |
| /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` |
| -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` |
| +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` |
| /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` |
| /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` |
| /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` |
| @@ -1220,6 +1668,7 @@ |
| test -z "$as_dir" && as_dir=. |
| echo "PATH: $as_dir" |
| done |
| +IFS=$as_save_IFS |
| |
| } >&5 |
| |
| @@ -1241,7 +1690,6 @@ |
| ac_configure_args= |
| ac_configure_args0= |
| ac_configure_args1= |
| -ac_sep= |
| ac_must_keep_next=false |
| for ac_pass in 1 2 |
| do |
| @@ -1252,7 +1700,7 @@ |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil) |
| continue ;; |
| - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) |
| + *\'*) |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| esac |
| case $ac_pass in |
| @@ -1274,9 +1722,7 @@ |
| -* ) ac_must_keep_next=true ;; |
| esac |
| fi |
| - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" |
| - # Get rid of the leading space. |
| - ac_sep=" " |
| + ac_configure_args="$ac_configure_args '$ac_arg'" |
| ;; |
| esac |
| done |
| @@ -1287,8 +1733,8 @@ |
| # When interrupted or exit'd, cleanup temporary files, and complete |
| # config.log. We remove comments because anyway the quotes in there |
| # would cause problems or look ugly. |
| -# WARNING: Be sure not to use single quotes in there, as some shells, |
| -# such as our DU 5.0 friend, will then `close' the trap. |
| +# WARNING: Use '\'' to represent an apostrophe within the trap. |
| +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. |
| trap 'exit_status=$? |
| # Save into config.log some information that might help in debugging. |
| { |
| @@ -1301,20 +1747,34 @@ |
| _ASBOX |
| echo |
| # The following way of writing the cache mishandles newlines in values, |
| -{ |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| (set) 2>&1 | |
| - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in |
| - *ac_space=\ *) |
| + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| sed -n \ |
| - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; |
| - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" |
| - ;; |
| + "s/'\''/'\''\\\\'\'''\''/g; |
| + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" |
| + ;; #( |
| *) |
| - sed -n \ |
| - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| ;; |
| - esac; |
| -} |
| + esac | |
| + sort |
| +) |
| echo |
| |
| cat <<\_ASBOX |
| @@ -1325,22 +1785,28 @@ |
| echo |
| for ac_var in $ac_subst_vars |
| do |
| - eval ac_val=$`echo $ac_var` |
| - echo "$ac_var='"'"'$ac_val'"'"'" |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| done | sort |
| echo |
| |
| if test -n "$ac_subst_files"; then |
| cat <<\_ASBOX |
| -## ------------- ## |
| -## Output files. ## |
| -## ------------- ## |
| +## ------------------- ## |
| +## File substitutions. ## |
| +## ------------------- ## |
| _ASBOX |
| echo |
| for ac_var in $ac_subst_files |
| do |
| - eval ac_val=$`echo $ac_var` |
| - echo "$ac_var='"'"'$ac_val'"'"'" |
| + eval ac_val=\$$ac_var |
| + case $ac_val in |
| + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| + esac |
| + echo "$ac_var='\''$ac_val'\''" |
| done | sort |
| echo |
| fi |
| @@ -1352,26 +1818,24 @@ |
| ## ----------- ## |
| _ASBOX |
| echo |
| - sed "/^$/d" confdefs.h | sort |
| + cat confdefs.h |
| echo |
| fi |
| test "$ac_signal" != 0 && |
| echo "$as_me: caught signal $ac_signal" |
| echo "$as_me: exit $exit_status" |
| } >&5 |
| - rm -f core *.core && |
| - rm -rf conftest* confdefs* conf$$* $ac_clean_files && |
| + rm -f core *.core core.conftest.* && |
| + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && |
| exit $exit_status |
| - ' 0 |
| +' 0 |
| for ac_signal in 1 2 13 15; do |
| trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal |
| done |
| ac_signal=0 |
| |
| # confdefs.h avoids OS command line length limits that DEFS can exceed. |
| -rm -rf conftest* confdefs.h |
| -# AIX cpp loses on an empty file, so make sure it contains at least a newline. |
| -echo >confdefs.h |
| +rm -f -r conftest* confdefs.h |
| |
| # Predefined preprocessor variables. |
| |
| @@ -1402,14 +1866,17 @@ |
| |
| # Let the site file select an alternate cache file if it wants to. |
| # Prefer explicitly selected file to automatically selected ones. |
| -if test -z "$CONFIG_SITE"; then |
| - if test "x$prefix" != xNONE; then |
| - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" |
| - else |
| - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" |
| - fi |
| +if test -n "$CONFIG_SITE"; then |
| + set x "$CONFIG_SITE" |
| +elif test "x$prefix" != xNONE; then |
| + set x "$prefix/share/config.site" "$prefix/etc/config.site" |
| +else |
| + set x "$ac_default_prefix/share/config.site" \ |
| + "$ac_default_prefix/etc/config.site" |
| fi |
| -for ac_site_file in $CONFIG_SITE; do |
| +shift |
| +for ac_site_file |
| +do |
| if test -r "$ac_site_file"; then |
| { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 |
| echo "$as_me: loading site script $ac_site_file" >&6;} |
| @@ -1425,8 +1892,8 @@ |
| { echo "$as_me:$LINENO: loading cache $cache_file" >&5 |
| echo "$as_me: loading cache $cache_file" >&6;} |
| case $cache_file in |
| - [\\/]* | ?:[\\/]* ) . $cache_file;; |
| - *) . ./$cache_file;; |
| + [\\/]* | ?:[\\/]* ) . "$cache_file";; |
| + *) . "./$cache_file";; |
| esac |
| fi |
| else |
| @@ -1438,12 +1905,11 @@ |
| # Check that the precious variables saved in the cache have kept the same |
| # value. |
| ac_cache_corrupted=false |
| -for ac_var in `(set) 2>&1 | |
| - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do |
| +for ac_var in $ac_precious_vars; do |
| eval ac_old_set=\$ac_cv_env_${ac_var}_set |
| eval ac_new_set=\$ac_env_${ac_var}_set |
| - eval ac_old_val="\$ac_cv_env_${ac_var}_value" |
| - eval ac_new_val="\$ac_env_${ac_var}_value" |
| + eval ac_old_val=\$ac_cv_env_${ac_var}_value |
| + eval ac_new_val=\$ac_env_${ac_var}_value |
| case $ac_old_set,$ac_new_set in |
| set,) |
| { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 |
| @@ -1468,8 +1934,7 @@ |
| # Pass precious variables to config.status. |
| if test "$ac_new_set" = set; then |
| case $ac_new_val in |
| - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) |
| - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
| + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
| *) ac_arg=$ac_var=$ac_new_val ;; |
| esac |
| case " $ac_configure_args " in |
| @@ -1486,12 +1951,6 @@ |
| { (exit 1); exit 1; }; } |
| fi |
| |
| -ac_ext=c |
| -ac_cpp='$CPP $CPPFLAGS' |
| -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| -ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| - |
| |
| |
| |
| @@ -1516,67 +1975,92 @@ |
| |
| |
| |
| +ac_ext=c |
| +ac_cpp='$CPP $CPPFLAGS' |
| +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| +ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| |
| |
| |
| |
| ac_aux_dir= |
| -for ac_dir in ../../.. $srcdir/../../..; do |
| - if test -f $ac_dir/install-sh; then |
| +for ac_dir in ../../.. "$srcdir"/../../..; do |
| + if test -f "$ac_dir/install-sh"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/install-sh -c" |
| break |
| - elif test -f $ac_dir/install.sh; then |
| + elif test -f "$ac_dir/install.sh"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/install.sh -c" |
| break |
| - elif test -f $ac_dir/shtool; then |
| + elif test -f "$ac_dir/shtool"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/shtool install -c" |
| break |
| fi |
| done |
| if test -z "$ac_aux_dir"; then |
| - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5 |
| -echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;} |
| + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5 |
| +echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| -ac_config_guess="$SHELL $ac_aux_dir/config.guess" |
| -ac_config_sub="$SHELL $ac_aux_dir/config.sub" |
| -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. |
| + |
| +# These three variables are undocumented and unsupported, |
| +# and are intended to be withdrawn in a future Autoconf release. |
| +# They can cause serious problems if a builder's source tree is in a directory |
| +# whose full name contains unusual characters. |
| +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. |
| +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. |
| +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. |
| + |
| |
| |
| |
| # Make sure we can run config.sub. |
| -$ac_config_sub sun4 >/dev/null 2>&1 || |
| - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 |
| -echo "$as_me: error: cannot run $ac_config_sub" >&2;} |
| +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || |
| + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 |
| +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} |
| { (exit 1); exit 1; }; } |
| |
| -echo "$as_me:$LINENO: checking build system type" >&5 |
| -echo $ECHO_N "checking build system type... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking build system type" >&5 |
| +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } |
| if test "${ac_cv_build+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - ac_cv_build_alias=$build_alias |
| -test -z "$ac_cv_build_alias" && |
| - ac_cv_build_alias=`$ac_config_guess` |
| -test -z "$ac_cv_build_alias" && |
| + ac_build_alias=$build_alias |
| +test "x$ac_build_alias" = x && |
| + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` |
| +test "x$ac_build_alias" = x && |
| { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 |
| echo "$as_me: error: cannot guess build type; you must specify one" >&2;} |
| { (exit 1); exit 1; }; } |
| -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || |
| - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 |
| -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} |
| +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} |
| { (exit 1); exit 1; }; } |
| |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
| -echo "${ECHO_T}$ac_cv_build" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
| +echo "${ECHO_T}$ac_cv_build" >&6; } |
| +case $ac_cv_build in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 |
| +echo "$as_me: error: invalid value of canonical build" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| build=$ac_cv_build |
| -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
| -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
| -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_build |
| +shift |
| +build_cpu=$1 |
| +build_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +build_os=$* |
| +IFS=$ac_save_IFS |
| +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac |
| |
| |
| am__api_version="1.9" |
| @@ -1593,8 +2077,8 @@ |
| # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| # OS/2's system install, which has a completely different semantic |
| # ./install, which can be erroneously created by make from ./install.sh. |
| -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| if test -z "$INSTALL"; then |
| if test "${ac_cv_path_install+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| @@ -1616,7 +2100,7 @@ |
| # by default. |
| for ac_prog in ginstall scoinst install; do |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| if test $ac_prog = install && |
| grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| # AIX install. It has an incompatible calling convention. |
| @@ -1635,21 +2119,22 @@ |
| ;; |
| esac |
| done |
| +IFS=$as_save_IFS |
| |
| |
| fi |
| if test "${ac_cv_path_install+set}" = set; then |
| INSTALL=$ac_cv_path_install |
| else |
| - # As a last resort, use the slow shell script. We don't cache a |
| - # path for INSTALL within a source directory, because that will |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| # break other packages using the cache if that directory is |
| - # removed, or if the path is relative. |
| + # removed, or if the value is a relative name. |
| INSTALL=$ac_install_sh |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| -echo "${ECHO_T}$INSTALL" >&6 |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| |
| # Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| # It thinks the first close brace ends the variable substitution. |
| @@ -1659,8 +2144,8 @@ |
| |
| test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
| |
| -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
| -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
| +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } |
| # Just in case |
| sleep 1 |
| echo timestamp > conftest.file |
| @@ -1702,20 +2187,20 @@ |
| Check your system clock" >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| -echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| +{ echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| test "$program_prefix" != NONE && |
| - program_transform_name="s,^,$program_prefix,;$program_transform_name" |
| + program_transform_name="s&^&$program_prefix&;$program_transform_name" |
| # Use a double $ so make ignores it. |
| test "$program_suffix" != NONE && |
| - program_transform_name="s,\$,$program_suffix,;$program_transform_name" |
| + program_transform_name="s&\$&$program_suffix&;$program_transform_name" |
| # Double any \ or $. echo might interpret backslashes. |
| # By default was `s,x,x', remove it if useless. |
| cat <<\_ACEOF >conftest.sed |
| s/[\\$]/&&/g;s/;s,x,x,$// |
| _ACEOF |
| program_transform_name=`echo $program_transform_name | sed -f conftest.sed` |
| -rm conftest.sed |
| +rm -f conftest.sed |
| |
| # expand $ac_aux_dir to an absolute path |
| am_aux_dir=`cd $ac_aux_dir && pwd` |
| @@ -1767,8 +2252,8 @@ |
| do |
| # Extract the first word of "$ac_prog", so it can be a program name with args. |
| set dummy $ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AWK+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -1781,54 +2266,57 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AWK="$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AWK=$ac_cv_prog_AWK |
| if test -n "$AWK"; then |
| - echo "$as_me:$LINENO: result: $AWK" >&5 |
| -echo "${ECHO_T}$AWK" >&6 |
| + { echo "$as_me:$LINENO: result: $AWK" >&5 |
| +echo "${ECHO_T}$AWK" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$AWK" && break |
| done |
| |
| -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
| -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 |
| -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` |
| -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then |
| +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
| +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } |
| +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` |
| +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| cat >conftest.make <<\_ACEOF |
| +SHELL = /bin/sh |
| all: |
| - @echo 'ac_maketemp="$(MAKE)"' |
| + @echo '@@@%%%=$(MAKE)=@@@%%%' |
| _ACEOF |
| # GNU make sometimes prints "make[1]: Entering...", which would confuse us. |
| -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` |
| -if test -n "$ac_maketemp"; then |
| - eval ac_cv_prog_make_${ac_make}_set=yes |
| -else |
| - eval ac_cv_prog_make_${ac_make}_set=no |
| -fi |
| +case `${MAKE-make} -f conftest.make 2>/dev/null` in |
| + *@@@%%%=?*=@@@%%%*) |
| + eval ac_cv_prog_make_${ac_make}_set=yes;; |
| + *) |
| + eval ac_cv_prog_make_${ac_make}_set=no;; |
| +esac |
| rm -f conftest.make |
| fi |
| -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| SET_MAKE= |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| SET_MAKE="MAKE=${MAKE-make}" |
| fi |
| |
| @@ -1843,7 +2331,7 @@ |
| |
| DEPDIR="${am__leading_dot}deps" |
| |
| - ac_config_commands="$ac_config_commands depfiles" |
| +ac_config_commands="$ac_config_commands depfiles" |
| |
| |
| am_make=${MAKE-make} |
| @@ -1853,8 +2341,8 @@ |
| .PHONY: am__doit |
| END |
| # If we don't find an include directive, just comment out the code. |
| -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 |
| -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 |
| +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } |
| am__include="#" |
| am__quote= |
| _am_result=none |
| @@ -1881,15 +2369,15 @@ |
| fi |
| |
| |
| -echo "$as_me:$LINENO: result: $_am_result" >&5 |
| -echo "${ECHO_T}$_am_result" >&6 |
| +{ echo "$as_me:$LINENO: result: $_am_result" >&5 |
| +echo "${ECHO_T}$_am_result" >&6; } |
| rm -f confinc confmf |
| |
| -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. |
| +# Check whether --enable-dependency-tracking was given. |
| if test "${enable_dependency_tracking+set}" = set; then |
| - enableval="$enable_dependency_tracking" |
| + enableval=$enable_dependency_tracking; |
| +fi |
| |
| -fi; |
| if test "x$enable_dependency_tracking" != xno; then |
| am_depcomp="$ac_aux_dir/depcomp" |
| AMDEPBACKSLASH='\' |
| @@ -1907,10 +2395,9 @@ |
| |
| |
| |
| -# Check whether --enable-multilib or --disable-multilib was given. |
| +# Check whether --enable-multilib was given. |
| if test "${enable_multilib+set}" = set; then |
| - enableval="$enable_multilib" |
| - case "${enableval}" in |
| + enableval=$enable_multilib; case "${enableval}" in |
| yes) multilib=yes ;; |
| no) multilib=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 |
| @@ -1919,11 +2406,11 @@ |
| esac |
| else |
| multilib=yes |
| -fi; |
| -# Check whether --enable-target-optspace or --disable-target-optspace was given. |
| +fi |
| + |
| +# Check whether --enable-target-optspace was given. |
| if test "${enable_target_optspace+set}" = set; then |
| - enableval="$enable_target_optspace" |
| - case "${enableval}" in |
| + enableval=$enable_target_optspace; case "${enableval}" in |
| yes) target_optspace=yes ;; |
| no) target_optspace=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 |
| @@ -1932,11 +2419,11 @@ |
| esac |
| else |
| target_optspace= |
| -fi; |
| -# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. |
| +fi |
| + |
| +# Check whether --enable-malloc-debugging was given. |
| if test "${enable_malloc_debugging+set}" = set; then |
| - enableval="$enable_malloc_debugging" |
| - case "${enableval}" in |
| + enableval=$enable_malloc_debugging; case "${enableval}" in |
| yes) malloc_debugging=yes ;; |
| no) malloc_debugging=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 |
| @@ -1945,11 +2432,11 @@ |
| esac |
| else |
| malloc_debugging= |
| -fi; |
| -# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-multithread was given. |
| if test "${enable_newlib_multithread+set}" = set; then |
| - enableval="$enable_newlib_multithread" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_multithread; case "${enableval}" in |
| yes) newlib_multithread=yes ;; |
| no) newlib_multithread=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 |
| @@ -1958,11 +2445,11 @@ |
| esac |
| else |
| newlib_multithread=yes |
| -fi; |
| -# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-iconv was given. |
| if test "${enable_newlib_iconv+set}" = set; then |
| - enableval="$enable_newlib_iconv" |
| - if test "${newlib_iconv+set}" != set; then |
| + enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then |
| case "${enableval}" in |
| yes) newlib_iconv=yes ;; |
| no) newlib_iconv=no ;; |
| @@ -1973,11 +2460,11 @@ |
| fi |
| else |
| newlib_iconv=${newlib_iconv} |
| -fi; |
| -# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-elix-level was given. |
| if test "${enable_newlib_elix_level+set}" = set; then |
| - enableval="$enable_newlib_elix_level" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_elix_level; case "${enableval}" in |
| 0) newlib_elix_level=0 ;; |
| 1) newlib_elix_level=1 ;; |
| 2) newlib_elix_level=2 ;; |
| @@ -1989,11 +2476,11 @@ |
| esac |
| else |
| newlib_elix_level=0 |
| -fi; |
| -# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-io-float was given. |
| if test "${enable_newlib_io_float+set}" = set; then |
| - enableval="$enable_newlib_io_float" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_io_float; case "${enableval}" in |
| yes) newlib_io_float=yes ;; |
| no) newlib_io_float=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 |
| @@ -2002,11 +2489,11 @@ |
| esac |
| else |
| newlib_io_float=yes |
| -fi; |
| -# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. |
| +fi |
| + |
| +# Check whether --enable-newlib-supplied-syscalls was given. |
| if test "${enable_newlib_supplied_syscalls+set}" = set; then |
| - enableval="$enable_newlib_supplied_syscalls" |
| - case "${enableval}" in |
| + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in |
| yes) newlib_may_supply_syscalls=yes ;; |
| no) newlib_may_supply_syscalls=no ;; |
| *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 |
| @@ -2015,7 +2502,8 @@ |
| esac |
| else |
| newlib_may_supply_syscalls=yes |
| -fi; |
| +fi |
| + |
| |
| |
| if test x${newlib_may_supply_syscalls} = xyes; then |
| @@ -2041,26 +2529,41 @@ |
| fi |
| |
| |
| -echo "$as_me:$LINENO: checking host system type" >&5 |
| -echo $ECHO_N "checking host system type... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking host system type" >&5 |
| +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } |
| if test "${ac_cv_host+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - ac_cv_host_alias=$host_alias |
| -test -z "$ac_cv_host_alias" && |
| - ac_cv_host_alias=$ac_cv_build_alias |
| -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || |
| - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 |
| -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} |
| + if test "x$host_alias" = x; then |
| + ac_cv_host=$ac_cv_build |
| +else |
| + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || |
| + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 |
| +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} |
| { (exit 1); exit 1; }; } |
| +fi |
| |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
| -echo "${ECHO_T}$ac_cv_host" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
| +echo "${ECHO_T}$ac_cv_host" >&6; } |
| +case $ac_cv_host in |
| +*-*-*) ;; |
| +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 |
| +echo "$as_me: error: invalid value of canonical host" >&2;} |
| + { (exit 1); exit 1; }; };; |
| +esac |
| host=$ac_cv_host |
| -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
| -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
| -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
| +ac_save_IFS=$IFS; IFS='-' |
| +set x $ac_cv_host |
| +shift |
| +host_cpu=$1 |
| +host_vendor=$2 |
| +shift; shift |
| +# Remember, the first character of IFS is used to create $*, |
| +# except with old shells: |
| +host_os=$* |
| +IFS=$ac_save_IFS |
| +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac |
| |
| |
| |
| @@ -2113,8 +2616,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2127,32 +2630,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_STRIP="${ac_tool_prefix}strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| STRIP=$ac_cv_prog_STRIP |
| if test -n "$STRIP"; then |
| - echo "$as_me:$LINENO: result: $STRIP" >&5 |
| -echo "${ECHO_T}$STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $STRIP" >&5 |
| +echo "${ECHO_T}$STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_STRIP"; then |
| ac_ct_STRIP=$STRIP |
| # Extract the first word of "strip", so it can be a program name with args. |
| set dummy strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2165,27 +2670,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_STRIP="strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" |
| fi |
| fi |
| ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP |
| if test -n "$ac_ct_STRIP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| -echo "${ECHO_T}$ac_ct_STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| +echo "${ECHO_T}$ac_ct_STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - STRIP=$ac_ct_STRIP |
| + if test "x$ac_ct_STRIP" = x; then |
| + STRIP=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + STRIP=$ac_ct_STRIP |
| + fi |
| else |
| STRIP="$ac_cv_prog_STRIP" |
| fi |
| @@ -2220,8 +2739,8 @@ |
| |
| # Extract the first word of "gcc", so it can be a program name with args. |
| set dummy gcc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2234,30 +2753,32 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="gcc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| |
| + |
| depcc="$CC" am_compiler_list= |
| |
| -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } |
| if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2346,8 +2867,8 @@ |
| fi |
| |
| fi |
| -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 |
| +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } |
| CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
| |
| |
| @@ -2366,8 +2887,8 @@ |
| if test -z "$CC"; then |
| # Extract the first word of "cc", so it can be a program name with args. |
| set dummy cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2381,7 +2902,7 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| ac_prog_rejected=yes |
| continue |
| @@ -2392,6 +2913,7 @@ |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| if test $ac_prog_rejected = yes; then |
| # We found a bogon in the path, so make sure we never use it. |
| @@ -2409,20 +2931,21 @@ |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 |
| echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| |
| -echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 |
| -echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 |
| +echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; } |
| if test "${ac_cv_c_compiler_gnu+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2442,8 +2965,8 @@ |
| ac_cv_c_compiler_gnu=no |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } |
| |
| if test $ac_cv_c_compiler_gnu = yes; then |
| GCC=yes |
| @@ -2452,13 +2975,16 @@ |
| CFLAGS= |
| ac_test_CFLAGS=${CFLAGS+set} |
| ac_save_CFLAGS=$CFLAGS |
| -CFLAGS="-g" |
| -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_cc_g+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - cat >conftest.$ac_ext <<_ACEOF |
| + ac_save_c_werror_flag=$ac_c_werror_flag |
| + ac_c_werror_flag=yes |
| + ac_cv_prog_cc_g=no |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| _ACEOF |
| cat confdefs.h >>conftest.$ac_ext |
| @@ -2474,38 +3000,118 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + ac_cv_prog_cc_g=yes |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + CFLAGS="" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + : |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_cv_prog_cc_g=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_prog_cc_g=no |
| + |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } |
| if test "$ac_test_CFLAGS" = set; then |
| CFLAGS=$ac_save_CFLAGS |
| elif test $ac_cv_prog_cc_g = yes; then |
| @@ -2537,8 +3143,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2551,32 +3157,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AS="${ac_tool_prefix}as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AS=$ac_cv_prog_AS |
| if test -n "$AS"; then |
| - echo "$as_me:$LINENO: result: $AS" >&5 |
| -echo "${ECHO_T}$AS" >&6 |
| + { echo "$as_me:$LINENO: result: $AS" >&5 |
| +echo "${ECHO_T}$AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AS"; then |
| ac_ct_AS=$AS |
| # Extract the first word of "as", so it can be a program name with args. |
| set dummy as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2589,26 +3197,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AS="as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_AS=$ac_cv_prog_ac_ct_AS |
| if test -n "$ac_ct_AS"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| -echo "${ECHO_T}$ac_ct_AS" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| +echo "${ECHO_T}$ac_ct_AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AS=$ac_ct_AS |
| + if test "x$ac_ct_AS" = x; then |
| + AS="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AS=$ac_ct_AS |
| + fi |
| else |
| AS="$ac_cv_prog_AS" |
| fi |
| @@ -2616,8 +3239,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2630,32 +3253,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AR="${ac_tool_prefix}ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AR=$ac_cv_prog_AR |
| if test -n "$AR"; then |
| - echo "$as_me:$LINENO: result: $AR" >&5 |
| -echo "${ECHO_T}$AR" >&6 |
| + { echo "$as_me:$LINENO: result: $AR" >&5 |
| +echo "${ECHO_T}$AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AR"; then |
| ac_ct_AR=$AR |
| # Extract the first word of "ar", so it can be a program name with args. |
| set dummy ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2668,26 +3293,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AR="ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_AR=$ac_cv_prog_ac_ct_AR |
| if test -n "$ac_ct_AR"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| -echo "${ECHO_T}$ac_ct_AR" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| +echo "${ECHO_T}$ac_ct_AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AR=$ac_ct_AR |
| + if test "x$ac_ct_AR" = x; then |
| + AR="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AR=$ac_ct_AR |
| + fi |
| else |
| AR="$ac_cv_prog_AR" |
| fi |
| @@ -2695,8 +3335,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2709,32 +3349,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| RANLIB=$ac_cv_prog_RANLIB |
| if test -n "$RANLIB"; then |
| - echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| -echo "${ECHO_T}$RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| +echo "${ECHO_T}$RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_RANLIB"; then |
| ac_ct_RANLIB=$RANLIB |
| # Extract the first word of "ranlib", so it can be a program name with args. |
| set dummy ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2747,27 +3389,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_RANLIB="ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" |
| fi |
| fi |
| ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
| if test -n "$ac_ct_RANLIB"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| -echo "${ECHO_T}$ac_ct_RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - RANLIB=$ac_ct_RANLIB |
| + if test "x$ac_ct_RANLIB" = x; then |
| + RANLIB=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + RANLIB=$ac_ct_RANLIB |
| + fi |
| else |
| RANLIB="$ac_cv_prog_RANLIB" |
| fi |
| @@ -2775,8 +3431,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}readelf; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_READELF+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2789,32 +3445,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_READELF="${ac_tool_prefix}readelf" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| READELF=$ac_cv_prog_READELF |
| if test -n "$READELF"; then |
| - echo "$as_me:$LINENO: result: $READELF" >&5 |
| -echo "${ECHO_T}$READELF" >&6 |
| + { echo "$as_me:$LINENO: result: $READELF" >&5 |
| +echo "${ECHO_T}$READELF" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_READELF"; then |
| ac_ct_READELF=$READELF |
| # Extract the first word of "readelf", so it can be a program name with args. |
| set dummy readelf; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -2827,27 +3485,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_READELF="readelf" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":" |
| fi |
| fi |
| ac_ct_READELF=$ac_cv_prog_ac_ct_READELF |
| if test -n "$ac_ct_READELF"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 |
| -echo "${ECHO_T}$ac_ct_READELF" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 |
| +echo "${ECHO_T}$ac_ct_READELF" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - READELF=$ac_ct_READELF |
| + if test "x$ac_ct_READELF" = x; then |
| + READELF=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + READELF=$ac_ct_READELF |
| + fi |
| else |
| READELF="$ac_cv_prog_READELF" |
| fi |
| @@ -2866,8 +3538,8 @@ |
| # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
| # OS/2's system install, which has a completely different semantic |
| # ./install, which can be erroneously created by make from ./install.sh. |
| -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
| +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } |
| if test -z "$INSTALL"; then |
| if test "${ac_cv_path_install+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| @@ -2889,7 +3561,7 @@ |
| # by default. |
| for ac_prog in ginstall scoinst install; do |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
| if test $ac_prog = install && |
| grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
| # AIX install. It has an incompatible calling convention. |
| @@ -2908,21 +3580,22 @@ |
| ;; |
| esac |
| done |
| +IFS=$as_save_IFS |
| |
| |
| fi |
| if test "${ac_cv_path_install+set}" = set; then |
| INSTALL=$ac_cv_path_install |
| else |
| - # As a last resort, use the slow shell script. We don't cache a |
| - # path for INSTALL within a source directory, because that will |
| + # As a last resort, use the slow shell script. Don't cache a |
| + # value for INSTALL within a source directory, because that will |
| # break other packages using the cache if that directory is |
| - # removed, or if the path is relative. |
| + # removed, or if the value is a relative name. |
| INSTALL=$ac_install_sh |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| -echo "${ECHO_T}$INSTALL" >&6 |
| +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 |
| +echo "${ECHO_T}$INSTALL" >&6; } |
| |
| # Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
| # It thinks the first close brace ends the variable substitution. |
| @@ -2936,17 +3609,17 @@ |
| # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */ |
| ac_given_INSTALL=$INSTALL |
| |
| -echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 |
| -echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 |
| - # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. |
| +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 |
| +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } |
| + # Check whether --enable-maintainer-mode was given. |
| if test "${enable_maintainer_mode+set}" = set; then |
| - enableval="$enable_maintainer_mode" |
| - USE_MAINTAINER_MODE=$enableval |
| + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval |
| else |
| USE_MAINTAINER_MODE=no |
| -fi; |
| - echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 |
| -echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 |
| +fi |
| + |
| + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 |
| +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } |
| |
| |
| if test $USE_MAINTAINER_MODE = yes; then |
| @@ -3066,64 +3739,89 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 |
| -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 |
| -if test "${lt_cv_path_SED+set}" = set; then |
| +{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 |
| +echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_SED+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ |
| + for ac_i in 1 2 3 4 5 6 7; do |
| + ac_script="$ac_script$as_nl$ac_script" |
| + done |
| + echo "$ac_script" | sed 99q >conftest.sed |
| + $as_unset ac_script || ac_script= |
| + # Extract the first word of "sed gsed" to use in msg output |
| +if test -z "$SED"; then |
| +set dummy sed gsed; ac_prog_name=$2 |
| +if test "${ac_cv_path_SED+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - # Loop through the user's path and test for sed and gsed. |
| -# Then use that list of sed's as ones to test for truncation. |
| + ac_path_SED_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| - for lt_ac_prog in sed gsed; do |
| - for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then |
| - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" |
| - fi |
| - done |
| - done |
| -done |
| -IFS=$as_save_IFS |
| -lt_ac_max=0 |
| -lt_ac_count=0 |
| -# Add /usr/xpg4/bin/sed as it is typically found on Solaris |
| -# along with /bin/sed that truncates output. |
| -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do |
| - test ! -f $lt_ac_sed && continue |
| - cat /dev/null > conftest.in |
| - lt_ac_count=0 |
| - echo $ECHO_N "0123456789$ECHO_C" >conftest.in |
| - # Check for GNU sed and select it if it is found. |
| - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then |
| - lt_cv_path_SED=$lt_ac_sed |
| - break |
| - fi |
| - while true; do |
| - cat conftest.in conftest.in >conftest.tmp |
| - mv conftest.tmp conftest.in |
| - cp conftest.in conftest.nl |
| - echo >>conftest.nl |
| - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break |
| - cmp -s conftest.out conftest.nl || break |
| - # 10000 chars as input seems more than enough |
| - test $lt_ac_count -gt 10 && break |
| - lt_ac_count=`expr $lt_ac_count + 1` |
| - if test $lt_ac_count -gt $lt_ac_max; then |
| - lt_ac_max=$lt_ac_count |
| - lt_cv_path_SED=$lt_ac_sed |
| + for ac_prog in sed gsed; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue |
| + # Check for GNU ac_path_SED and select it if it is found. |
| + # Check for GNU $ac_path_SED |
| +case `"$ac_path_SED" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo '' >> "conftest.nl" |
| + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_SED_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_SED="$ac_path_SED" |
| + ac_path_SED_max=$ac_count |
| fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| + |
| + $ac_path_SED_found && break 3 |
| done |
| done |
| |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + |
| +SED="$ac_cv_path_SED" |
| +if test -z "$SED"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} |
| + { (exit 1); exit 1; }; } |
| fi |
| |
| -SED=$lt_cv_path_SED |
| +else |
| + ac_cv_path_SED=$SED |
| +fi |
| |
| -echo "$as_me:$LINENO: result: $SED" >&5 |
| -echo "${ECHO_T}$SED" >&6 |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 |
| +echo "${ECHO_T}$ac_cv_path_SED" >&6; } |
| + SED="$ac_cv_path_SED" |
| + rm -f conftest.sed |
| |
| test -z "$SED" && SED=sed |
| Xsed="$SED -e 1s/^X//" |
| @@ -3146,8 +3844,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3160,32 +3858,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AS="${ac_tool_prefix}as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AS=$ac_cv_prog_AS |
| if test -n "$AS"; then |
| - echo "$as_me:$LINENO: result: $AS" >&5 |
| -echo "${ECHO_T}$AS" >&6 |
| + { echo "$as_me:$LINENO: result: $AS" >&5 |
| +echo "${ECHO_T}$AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AS"; then |
| ac_ct_AS=$AS |
| # Extract the first word of "as", so it can be a program name with args. |
| set dummy as; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AS+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3198,27 +3898,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AS="as" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false" |
| fi |
| fi |
| ac_ct_AS=$ac_cv_prog_ac_ct_AS |
| if test -n "$ac_ct_AS"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| -echo "${ECHO_T}$ac_ct_AS" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
| +echo "${ECHO_T}$ac_ct_AS" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AS=$ac_ct_AS |
| + if test "x$ac_ct_AS" = x; then |
| + AS="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AS=$ac_ct_AS |
| + fi |
| else |
| AS="$ac_cv_prog_AS" |
| fi |
| @@ -3226,8 +3940,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}dlltool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_DLLTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3240,32 +3954,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| DLLTOOL=$ac_cv_prog_DLLTOOL |
| if test -n "$DLLTOOL"; then |
| - echo "$as_me:$LINENO: result: $DLLTOOL" >&5 |
| -echo "${ECHO_T}$DLLTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 |
| +echo "${ECHO_T}$DLLTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_DLLTOOL"; then |
| ac_ct_DLLTOOL=$DLLTOOL |
| # Extract the first word of "dlltool", so it can be a program name with args. |
| set dummy dlltool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3278,27 +3994,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_DLLTOOL="dlltool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false" |
| fi |
| fi |
| ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL |
| if test -n "$ac_ct_DLLTOOL"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 |
| -echo "${ECHO_T}$ac_ct_DLLTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 |
| +echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - DLLTOOL=$ac_ct_DLLTOOL |
| + if test "x$ac_ct_DLLTOOL" = x; then |
| + DLLTOOL="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + DLLTOOL=$ac_ct_DLLTOOL |
| + fi |
| else |
| DLLTOOL="$ac_cv_prog_DLLTOOL" |
| fi |
| @@ -3306,8 +4036,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3320,32 +4050,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OBJDUMP=$ac_cv_prog_OBJDUMP |
| if test -n "$OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| -echo "${ECHO_T}$OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| +echo "${ECHO_T}$OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OBJDUMP"; then |
| ac_ct_OBJDUMP=$OBJDUMP |
| # Extract the first word of "objdump", so it can be a program name with args. |
| set dummy objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3358,27 +4090,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OBJDUMP="objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" |
| fi |
| fi |
| ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP |
| if test -n "$ac_ct_OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OBJDUMP=$ac_ct_OBJDUMP |
| + if test "x$ac_ct_OBJDUMP" = x; then |
| + OBJDUMP="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OBJDUMP=$ac_ct_OBJDUMP |
| + fi |
| else |
| OBJDUMP="$ac_cv_prog_OBJDUMP" |
| fi |
| @@ -3439,8 +4185,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}gcc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3453,32 +4199,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="${ac_tool_prefix}gcc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_CC"; then |
| ac_ct_CC=$CC |
| # Extract the first word of "gcc", so it can be a program name with args. |
| set dummy gcc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3491,36 +4239,51 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_CC="gcc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_CC=$ac_cv_prog_ac_ct_CC |
| if test -n "$ac_ct_CC"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| -echo "${ECHO_T}$ac_ct_CC" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| +echo "${ECHO_T}$ac_ct_CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - CC=$ac_ct_CC |
| + if test "x$ac_ct_CC" = x; then |
| + CC="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + CC=$ac_ct_CC |
| + fi |
| else |
| CC="$ac_cv_prog_CC" |
| fi |
| |
| if test -z "$CC"; then |
| - if test -n "$ac_tool_prefix"; then |
| - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. |
| + if test -n "$ac_tool_prefix"; then |
| + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3533,98 +4296,59 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="${ac_tool_prefix}cc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| + fi |
| fi |
| -if test -z "$ac_cv_prog_CC"; then |
| - ac_ct_CC=$CC |
| +if test -z "$CC"; then |
| # Extract the first word of "cc", so it can be a program name with args. |
| set dummy cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - if test -n "$ac_ct_CC"; then |
| - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. |
| + if test -n "$CC"; then |
| + ac_cv_prog_CC="$CC" # Let the user override the test. |
| else |
| + ac_prog_rejected=no |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| - ac_cv_prog_ac_ct_CC="cc" |
| - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| - break 2 |
| - fi |
| -done |
| -done |
| - |
| -fi |
| -fi |
| -ac_ct_CC=$ac_cv_prog_ac_ct_CC |
| -if test -n "$ac_ct_CC"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| -echo "${ECHO_T}$ac_ct_CC" >&6 |
| -else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| -fi |
| - |
| - CC=$ac_ct_CC |
| -else |
| - CC="$ac_cv_prog_CC" |
| -fi |
| - |
| -fi |
| -if test -z "$CC"; then |
| - # Extract the first word of "cc", so it can be a program name with args. |
| -set dummy cc; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_CC+set}" = set; then |
| - echo $ECHO_N "(cached) $ECHO_C" >&6 |
| -else |
| - if test -n "$CC"; then |
| - ac_cv_prog_CC="$CC" # Let the user override the test. |
| -else |
| - ac_prog_rejected=no |
| -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in $PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| - ac_prog_rejected=yes |
| - continue |
| - fi |
| - ac_cv_prog_CC="cc" |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
| + ac_prog_rejected=yes |
| + continue |
| + fi |
| + ac_cv_prog_CC="cc" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| if test $ac_prog_rejected = yes; then |
| # We found a bogon in the path, so make sure we never use it. |
| @@ -3642,22 +4366,23 @@ |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$CC"; then |
| if test -n "$ac_tool_prefix"; then |
| - for ac_prog in cl |
| + for ac_prog in cl.exe |
| do |
| # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. |
| set dummy $ac_tool_prefix$ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3670,36 +4395,38 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_CC="$ac_tool_prefix$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| CC=$ac_cv_prog_CC |
| if test -n "$CC"; then |
| - echo "$as_me:$LINENO: result: $CC" >&5 |
| -echo "${ECHO_T}$CC" >&6 |
| + { echo "$as_me:$LINENO: result: $CC" >&5 |
| +echo "${ECHO_T}$CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$CC" && break |
| done |
| fi |
| if test -z "$CC"; then |
| ac_ct_CC=$CC |
| - for ac_prog in cl |
| + for ac_prog in cl.exe |
| do |
| # Extract the first word of "$ac_prog", so it can be a program name with args. |
| set dummy $ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3712,29 +4439,45 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_CC="$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_CC=$ac_cv_prog_ac_ct_CC |
| if test -n "$ac_ct_CC"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| -echo "${ECHO_T}$ac_ct_CC" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
| +echo "${ECHO_T}$ac_ct_CC" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$ac_ct_CC" && break |
| done |
| |
| - CC=$ac_ct_CC |
| + if test "x$ac_ct_CC" = x; then |
| + CC="" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + CC=$ac_ct_CC |
| + fi |
| fi |
| |
| fi |
| @@ -3747,21 +4490,35 @@ |
| { (exit 1); exit 1; }; } |
| |
| # Provide some information about the compiler. |
| -echo "$as_me:$LINENO:" \ |
| - "checking for C compiler version" >&5 |
| +echo "$as_me:$LINENO: checking for C compiler version" >&5 |
| ac_compiler=`set X $ac_compile; echo $2` |
| -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 |
| - (eval $ac_compiler --version </dev/null >&5) 2>&5 |
| +{ (ac_try="$ac_compiler --version >&5" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compiler --version >&5") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 |
| - (eval $ac_compiler -v </dev/null >&5) 2>&5 |
| +{ (ac_try="$ac_compiler -v >&5" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compiler -v >&5") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 |
| - (eval $ac_compiler -V </dev/null >&5) 2>&5 |
| +{ (ac_try="$ac_compiler -V >&5" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compiler -V >&5") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| @@ -3786,47 +4543,77 @@ |
| # Try to create an executable without -o first, disregard a.out. |
| # It will help us diagnose broken compilers, and finding out an intuition |
| # of exeext. |
| -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 |
| -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 |
| +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } |
| ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 |
| - (eval $ac_link_default) 2>&5 |
| +# |
| +# List of possible output files, starting from the most likely. |
| +# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) |
| +# only as a last resort. b.out is created by i960 compilers. |
| +ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' |
| +# |
| +# The IRIX 6 linker writes into existing files which may not be |
| +# executable, retaining their permissions. Remove them first so a |
| +# subsequent execution test works. |
| +ac_rmfiles= |
| +for ac_file in $ac_files |
| +do |
| + case $ac_file in |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; |
| + * ) ac_rmfiles="$ac_rmfiles $ac_file";; |
| + esac |
| +done |
| +rm -f $ac_rmfiles |
| + |
| +if { (ac_try="$ac_link_default" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link_default") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; then |
| - # Find the output, starting from the most likely. This scheme is |
| -# not robust to junk in `.', hence go to wildcards (a.*) only as a last |
| -# resort. |
| - |
| -# Be careful to initialize this variable, since it used to be cached. |
| -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. |
| -ac_cv_exeext= |
| -# b.out is created by i960 compilers. |
| -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out |
| + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. |
| +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' |
| +# in a Makefile. We should not override ac_cv_exeext if it was cached, |
| +# so that the user can short-circuit this test for compilers unknown to |
| +# Autoconf. |
| +for ac_file in $ac_files '' |
| do |
| test -f "$ac_file" || continue |
| case $ac_file in |
| - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) |
| - ;; |
| - conftest.$ac_ext ) |
| - # This is the source file. |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) |
| ;; |
| [ab].out ) |
| # We found the default executable, but exeext='' is most |
| # certainly right. |
| break;; |
| *.* ) |
| - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
| - # FIXME: I believe we export ac_cv_exeext for Libtool, |
| - # but it would be cool to find out if it's true. Does anybody |
| - # maintain Libtool? --akim. |
| - export ac_cv_exeext |
| + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; |
| + then :; else |
| + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
| + fi |
| + # We set ac_cv_exeext here because the later test for it is not |
| + # safe: cross compilers may not add the suffix if given an `-o' |
| + # argument, so we may need to know it at that point already. |
| + # Even if this section looks crufty: it has the advantage of |
| + # actually working. |
| break;; |
| * ) |
| break;; |
| esac |
| done |
| +test "$ac_cv_exeext" = no && ac_cv_exeext= |
| + |
| else |
| + ac_file='' |
| +fi |
| + |
| +{ echo "$as_me:$LINENO: result: $ac_file" >&5 |
| +echo "${ECHO_T}$ac_file" >&6; } |
| +if test -z "$ac_file"; then |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| @@ -3838,19 +4625,21 @@ |
| fi |
| |
| ac_exeext=$ac_cv_exeext |
| -echo "$as_me:$LINENO: result: $ac_file" >&5 |
| -echo "${ECHO_T}$ac_file" >&6 |
| |
| -# Check the compiler produces executables we can run. If not, either |
| +# Check that the compiler produces executables we can run. If not, either |
| # the compiler is broken, or we cross compile. |
| -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 |
| -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 |
| +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } |
| # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 |
| # If not cross compiling, check that we can run a simple program. |
| if test "$cross_compiling" != yes; then |
| if { ac_try='./$ac_file' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + { (case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_try") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; }; then |
| @@ -3869,22 +4658,27 @@ |
| fi |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| +{ echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| |
| rm -f a.out a.exe conftest$ac_cv_exeext b.out |
| ac_clean_files=$ac_clean_files_save |
| -# Check the compiler produces executables we can run. If not, either |
| +# Check that the compiler produces executables we can run. If not, either |
| # the compiler is broken, or we cross compile. |
| -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 |
| -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 |
| -echo "$as_me:$LINENO: result: $cross_compiling" >&5 |
| -echo "${ECHO_T}$cross_compiling" >&6 |
| - |
| -echo "$as_me:$LINENO: checking for suffix of executables" >&5 |
| -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>&5 |
| +{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 |
| +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } |
| +{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 |
| +echo "${ECHO_T}$cross_compiling" >&6; } |
| + |
| +{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 |
| +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; then |
| @@ -3895,9 +4689,8 @@ |
| for ac_file in conftest.exe conftest conftest.*; do |
| test -f "$ac_file" || continue |
| case $ac_file in |
| - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; |
| *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
| - export ac_cv_exeext |
| break;; |
| * ) break;; |
| esac |
| @@ -3911,14 +4704,14 @@ |
| fi |
| |
| rm -f conftest$ac_cv_exeext |
| -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 |
| -echo "${ECHO_T}$ac_cv_exeext" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 |
| +echo "${ECHO_T}$ac_cv_exeext" >&6; } |
| |
| rm -f conftest.$ac_ext |
| EXEEXT=$ac_cv_exeext |
| ac_exeext=$EXEEXT |
| -echo "$as_me:$LINENO: checking for suffix of object files" >&5 |
| -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 |
| +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } |
| if test "${ac_cv_objext+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3938,14 +4731,20 @@ |
| } |
| _ACEOF |
| rm -f conftest.o conftest.obj |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>&5 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; then |
| - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do |
| + for ac_file in conftest.o conftest.obj conftest.*; do |
| + test -f "$ac_file" || continue; |
| case $ac_file in |
| - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; |
| + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; |
| *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` |
| break;; |
| esac |
| @@ -3963,12 +4762,12 @@ |
| |
| rm -f conftest.$ac_cv_objext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 |
| -echo "${ECHO_T}$ac_cv_objext" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 |
| +echo "${ECHO_T}$ac_cv_objext" >&6; } |
| OBJEXT=$ac_cv_objext |
| ac_objext=$OBJEXT |
| -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 |
| -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 |
| +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } |
| if test "${ac_cv_c_compiler_gnu+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -3991,50 +4790,49 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_compiler_gnu=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_compiler_gnu=no |
| + ac_compiler_gnu=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| ac_cv_c_compiler_gnu=$ac_compiler_gnu |
| |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
| +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } |
| GCC=`test $ac_compiler_gnu = yes && echo yes` |
| ac_test_CFLAGS=${CFLAGS+set} |
| ac_save_CFLAGS=$CFLAGS |
| -CFLAGS="-g" |
| -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
| +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_cc_g+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - cat >conftest.$ac_ext <<_ACEOF |
| + ac_save_c_werror_flag=$ac_c_werror_flag |
| + ac_c_werror_flag=yes |
| + ac_cv_prog_cc_g=no |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| _ACEOF |
| cat confdefs.h >>conftest.$ac_ext |
| @@ -4050,38 +4848,118 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + ac_cv_prog_cc_g=yes |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + CFLAGS="" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + : |
| +else |
| + echo "$as_me: failed program was:" >&5 |
| +sed 's/^/| /' conftest.$ac_ext >&5 |
| + |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| + CFLAGS="-g" |
| + cat >conftest.$ac_ext <<_ACEOF |
| +/* confdefs.h. */ |
| +_ACEOF |
| +cat confdefs.h >>conftest.$ac_ext |
| +cat >>conftest.$ac_ext <<_ACEOF |
| +/* end confdefs.h. */ |
| + |
| +int |
| +main () |
| +{ |
| + |
| + ; |
| + return 0; |
| +} |
| +_ACEOF |
| +rm -f conftest.$ac_objext |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| + grep -v '^ *+' conftest.er1 >conftest.err |
| + rm -f conftest.er1 |
| + cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_cv_prog_cc_g=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_prog_cc_g=no |
| + |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| +fi |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| + ac_c_werror_flag=$ac_save_c_werror_flag |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
| +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } |
| if test "$ac_test_CFLAGS" = set; then |
| CFLAGS=$ac_save_CFLAGS |
| elif test $ac_cv_prog_cc_g = yes; then |
| @@ -4097,12 +4975,12 @@ |
| CFLAGS= |
| fi |
| fi |
| -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 |
| -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_cc_stdc+set}" = set; then |
| +{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 |
| +echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } |
| +if test "${ac_cv_prog_cc_c89+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - ac_cv_prog_cc_stdc=no |
| + ac_cv_prog_cc_c89=no |
| ac_save_CC=$CC |
| cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| @@ -4136,12 +5014,17 @@ |
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has |
| function prototypes and stuff, but not '\xHH' hex character constants. |
| These don't provoke an error unfortunately, instead are silently treated |
| - as 'x'. The following induces an error, until -std1 is added to get |
| + as 'x'. The following induces an error, until -std is added to get |
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an |
| array size at least. It's necessary to write '\x00'==0 to get something |
| - that's true only with -std1. */ |
| + that's true only with -std. */ |
| int osf4_cc_array ['\x00' == 0 ? 1 : -1]; |
| |
| +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters |
| + inside strings and character constants. */ |
| +#define FOO(x) 'x' |
| +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; |
| + |
| int test (int i, double x); |
| struct s1 {int (*f) (int a);}; |
| struct s2 {int (*f) (double a);}; |
| @@ -4156,205 +5039,57 @@ |
| return 0; |
| } |
| _ACEOF |
| -# Don't try gcc -ansi; that turns off useful extensions and |
| -# breaks some systems' header files. |
| -# AIX -qlanglvl=ansi |
| -# Ultrix and OSF/1 -std1 |
| -# HP-UX 10.20 and later -Ae |
| -# HP-UX older versions -Aa -D_HPUX_SOURCE |
| -# SVR4 -Xc -D__EXTENSIONS__ |
| -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" |
| +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ |
| + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" |
| do |
| CC="$ac_save_CC $ac_arg" |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - ac_cv_prog_cc_stdc=$ac_arg |
| -break |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| + ac_cv_prog_cc_c89=$ac_arg |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext |
| + |
| +rm -f core conftest.err conftest.$ac_objext |
| + test "x$ac_cv_prog_cc_c89" != "xno" && break |
| done |
| -rm -f conftest.$ac_ext conftest.$ac_objext |
| +rm -f conftest.$ac_ext |
| CC=$ac_save_CC |
| |
| fi |
| - |
| -case "x$ac_cv_prog_cc_stdc" in |
| - x|xno) |
| - echo "$as_me:$LINENO: result: none needed" >&5 |
| -echo "${ECHO_T}none needed" >&6 ;; |
| +# AC_CACHE_VAL |
| +case "x$ac_cv_prog_cc_c89" in |
| + x) |
| + { echo "$as_me:$LINENO: result: none needed" >&5 |
| +echo "${ECHO_T}none needed" >&6; } ;; |
| + xno) |
| + { echo "$as_me:$LINENO: result: unsupported" >&5 |
| +echo "${ECHO_T}unsupported" >&6; } ;; |
| *) |
| - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 |
| - CC="$CC $ac_cv_prog_cc_stdc" ;; |
| + CC="$CC $ac_cv_prog_cc_c89" |
| + { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 |
| +echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; |
| esac |
| |
| -# Some people use a C++ compiler to compile C. Since we use `exit', |
| -# in C++ we need to declare it. In case someone uses the same compiler |
| -# for both compiling C and C++ we need to have the C++ compiler decide |
| -# the declaration of exit, since it's the most demanding environment. |
| -cat >conftest.$ac_ext <<_ACEOF |
| -#ifndef __cplusplus |
| - choke me |
| -#endif |
| -_ACEOF |
| -rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| - ac_status=$? |
| - grep -v '^ *+' conftest.er1 >conftest.err |
| - rm -f conftest.er1 |
| - cat conftest.err >&5 |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - for ac_declaration in \ |
| - '' \ |
| - 'extern "C" void std::exit (int) throw (); using std::exit;' \ |
| - 'extern "C" void std::exit (int); using std::exit;' \ |
| - 'extern "C" void exit (int) throw ();' \ |
| - 'extern "C" void exit (int);' \ |
| - 'void exit (int);' |
| -do |
| - cat >conftest.$ac_ext <<_ACEOF |
| -/* confdefs.h. */ |
| -_ACEOF |
| -cat confdefs.h >>conftest.$ac_ext |
| -cat >>conftest.$ac_ext <<_ACEOF |
| -/* end confdefs.h. */ |
| -$ac_declaration |
| -#include <stdlib.h> |
| -int |
| -main () |
| -{ |
| -exit (42); |
| - ; |
| - return 0; |
| -} |
| -_ACEOF |
| -rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| - ac_status=$? |
| - grep -v '^ *+' conftest.er1 >conftest.err |
| - rm -f conftest.er1 |
| - cat conftest.err >&5 |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - : |
| -else |
| - echo "$as_me: failed program was:" >&5 |
| -sed 's/^/| /' conftest.$ac_ext >&5 |
| - |
| -continue |
| -fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| - cat >conftest.$ac_ext <<_ACEOF |
| -/* confdefs.h. */ |
| -_ACEOF |
| -cat confdefs.h >>conftest.$ac_ext |
| -cat >>conftest.$ac_ext <<_ACEOF |
| -/* end confdefs.h. */ |
| -$ac_declaration |
| -int |
| -main () |
| -{ |
| -exit (42); |
| - ; |
| - return 0; |
| -} |
| -_ACEOF |
| -rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| - ac_status=$? |
| - grep -v '^ *+' conftest.er1 >conftest.err |
| - rm -f conftest.er1 |
| - cat conftest.err >&5 |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| - break |
| -else |
| - echo "$as_me: failed program was:" >&5 |
| -sed 's/^/| /' conftest.$ac_ext >&5 |
| - |
| -fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| -done |
| -rm -f conftest* |
| -if test -n "$ac_declaration"; then |
| - echo '#ifdef __cplusplus' >>confdefs.h |
| - echo $ac_declaration >>confdefs.h |
| - echo '#endif' >>confdefs.h |
| -fi |
| |
| -else |
| - echo "$as_me: failed program was:" >&5 |
| -sed 's/^/| /' conftest.$ac_ext >&5 |
| - |
| -fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| ac_ext=c |
| ac_cpp='$CPP $CPPFLAGS' |
| ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| @@ -4363,8 +5098,8 @@ |
| |
| depcc="$CC" am_compiler_list= |
| |
| -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
| +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } |
| if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4446,58 +5181,273 @@ |
| fi |
| done |
| |
| - cd .. |
| - rm -rf conftest.dir |
| -else |
| - am_cv_CC_dependencies_compiler_type=none |
| + cd .. |
| + rm -rf conftest.dir |
| +else |
| + am_cv_CC_dependencies_compiler_type=none |
| +fi |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } |
| +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
| + |
| + |
| + |
| +if |
| + test "x$enable_dependency_tracking" != xno \ |
| + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then |
| + am__fastdepCC_TRUE= |
| + am__fastdepCC_FALSE='#' |
| +else |
| + am__fastdepCC_TRUE='#' |
| + am__fastdepCC_FALSE= |
| +fi |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 |
| +echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_GREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + # Extract the first word of "grep ggrep" to use in msg output |
| +if test -z "$GREP"; then |
| +set dummy grep ggrep; ac_prog_name=$2 |
| +if test "${ac_cv_path_GREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_path_GREP_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_prog in grep ggrep; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue |
| + # Check for GNU ac_path_GREP and select it if it is found. |
| + # Check for GNU $ac_path_GREP |
| +case `"$ac_path_GREP" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo 'GREP' >> "conftest.nl" |
| + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_GREP_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_GREP="$ac_path_GREP" |
| + ac_path_GREP_max=$ac_count |
| + fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| + |
| + $ac_path_GREP_found && break 3 |
| + done |
| +done |
| + |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| +fi |
| + |
| +GREP="$ac_cv_path_GREP" |
| +if test -z "$GREP"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| + |
| +else |
| + ac_cv_path_GREP=$GREP |
| +fi |
| + |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 |
| +echo "${ECHO_T}$ac_cv_path_GREP" >&6; } |
| + GREP="$ac_cv_path_GREP" |
| + |
| + |
| +{ echo "$as_me:$LINENO: checking for egrep" >&5 |
| +echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_EGREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 |
| + then ac_cv_path_EGREP="$GREP -E" |
| + else |
| + # Extract the first word of "egrep" to use in msg output |
| +if test -z "$EGREP"; then |
| +set dummy egrep; ac_prog_name=$2 |
| +if test "${ac_cv_path_EGREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + ac_path_EGREP_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_prog in egrep; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue |
| + # Check for GNU ac_path_EGREP and select it if it is found. |
| + # Check for GNU $ac_path_EGREP |
| +case `"$ac_path_EGREP" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo 'EGREP' >> "conftest.nl" |
| + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_EGREP_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_EGREP="$ac_path_EGREP" |
| + ac_path_EGREP_max=$ac_count |
| + fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| + |
| + $ac_path_EGREP_found && break 3 |
| + done |
| +done |
| + |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| fi |
| |
| +EGREP="$ac_cv_path_EGREP" |
| +if test -z "$EGREP"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} |
| + { (exit 1); exit 1; }; } |
| fi |
| -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
| -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 |
| -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
| |
| +else |
| + ac_cv_path_EGREP=$EGREP |
| +fi |
| |
| |
| -if |
| - test "x$enable_dependency_tracking" != xno \ |
| - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then |
| - am__fastdepCC_TRUE= |
| - am__fastdepCC_FALSE='#' |
| -else |
| - am__fastdepCC_TRUE='#' |
| - am__fastdepCC_FALSE= |
| + fi |
| fi |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 |
| +echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } |
| + EGREP="$ac_cv_path_EGREP" |
| |
| |
| -echo "$as_me:$LINENO: checking for egrep" >&5 |
| -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_egrep+set}" = set; then |
| +{ echo "$as_me:$LINENO: checking for fgrep" >&5 |
| +echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } |
| +if test "${ac_cv_path_FGREP+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 |
| + then ac_cv_path_FGREP="$GREP -F" |
| + else |
| + # Extract the first word of "fgrep" to use in msg output |
| +if test -z "$FGREP"; then |
| +set dummy fgrep; ac_prog_name=$2 |
| +if test "${ac_cv_path_FGREP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 |
| - then ac_cv_prog_egrep='grep -E' |
| - else ac_cv_prog_egrep='egrep' |
| + ac_path_FGREP_found=false |
| +# Loop through the user's path and test for each of PROGNAME-LIST |
| +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + for ac_prog in fgrep; do |
| + for ac_exec_ext in '' $ac_executable_extensions; do |
| + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" |
| + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue |
| + # Check for GNU ac_path_FGREP and select it if it is found. |
| + # Check for GNU $ac_path_FGREP |
| +case `"$ac_path_FGREP" --version 2>&1` in |
| +*GNU*) |
| + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; |
| +*) |
| + ac_count=0 |
| + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" |
| + while : |
| + do |
| + cat "conftest.in" "conftest.in" >"conftest.tmp" |
| + mv "conftest.tmp" "conftest.in" |
| + cp "conftest.in" "conftest.nl" |
| + echo 'FGREP' >> "conftest.nl" |
| + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break |
| + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break |
| + ac_count=`expr $ac_count + 1` |
| + if test $ac_count -gt ${ac_path_FGREP_max-0}; then |
| + # Best one so far, save it but keep looking for a better one |
| + ac_cv_path_FGREP="$ac_path_FGREP" |
| + ac_path_FGREP_max=$ac_count |
| fi |
| + # 10*(2^10) chars as input seems more than enough |
| + test $ac_count -gt 10 && break |
| + done |
| + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; |
| +esac |
| + |
| + |
| + $ac_path_FGREP_found && break 3 |
| + done |
| +done |
| + |
| +done |
| +IFS=$as_save_IFS |
| + |
| + |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 |
| - EGREP=$ac_cv_prog_egrep |
| |
| +FGREP="$ac_cv_path_FGREP" |
| +if test -z "$FGREP"; then |
| + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 |
| +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} |
| + { (exit 1); exit 1; }; } |
| +fi |
| |
| -echo "$as_me:$LINENO: checking for fgrep" >&5 |
| -echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 |
| -if test "${ac_cv_prog_fgrep+set}" = set; then |
| - echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| - if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1 |
| - then ac_cv_prog_fgrep='grep -F' |
| - else ac_cv_prog_fgrep='fgrep' |
| - fi |
| + ac_cv_path_FGREP=$FGREP |
| +fi |
| + |
| + |
| + fi |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5 |
| -echo "${ECHO_T}$ac_cv_prog_fgrep" >&6 |
| - FGREP=$ac_cv_prog_fgrep |
| +{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 |
| +echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } |
| + FGREP="$ac_cv_path_FGREP" |
| |
| |
| test -z "$GREP" && GREP=grep |
| @@ -4520,18 +5470,18 @@ |
| |
| |
| |
| -# Check whether --with-gnu-ld or --without-gnu-ld was given. |
| +# Check whether --with-gnu-ld was given. |
| if test "${with_gnu_ld+set}" = set; then |
| - withval="$with_gnu_ld" |
| - test "$withval" = no || with_gnu_ld=yes |
| + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes |
| else |
| with_gnu_ld=no |
| -fi; |
| +fi |
| + |
| ac_prog=ld |
| if test "$GCC" = yes; then |
| # Check if gcc -print-prog-name=ld gives a path. |
| - echo "$as_me:$LINENO: checking for ld used by $CC" >&5 |
| -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 |
| +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } |
| case $host in |
| *-*-mingw*) |
| # gcc leaves a trailing carriage return which upsets mingw |
| @@ -4560,11 +5510,11 @@ |
| ;; |
| esac |
| elif test "$with_gnu_ld" = yes; then |
| - echo "$as_me:$LINENO: checking for GNU ld" >&5 |
| -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for GNU ld" >&5 |
| +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } |
| else |
| - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 |
| -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 |
| +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } |
| fi |
| if test "${lt_cv_path_LD+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| @@ -4597,17 +5547,17 @@ |
| |
| LD="$lt_cv_path_LD" |
| if test -n "$LD"; then |
| - echo "$as_me:$LINENO: result: $LD" >&5 |
| -echo "${ECHO_T}$LD" >&6 |
| + { echo "$as_me:$LINENO: result: $LD" >&5 |
| +echo "${ECHO_T}$LD" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 |
| echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} |
| { (exit 1); exit 1; }; } |
| -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 |
| -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 |
| +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_gnu_ld+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4621,8 +5571,8 @@ |
| ;; |
| esac |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } |
| with_gnu_ld=$lt_cv_prog_gnu_ld |
| |
| |
| @@ -4633,8 +5583,8 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 |
| -echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 |
| +echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } |
| if test "${lt_cv_path_NM+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4682,8 +5632,8 @@ |
| : ${lt_cv_path_NM=no} |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 |
| -echo "${ECHO_T}$lt_cv_path_NM" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 |
| +echo "${ECHO_T}$lt_cv_path_NM" >&6; } |
| if test "$lt_cv_path_NM" != "no"; then |
| NM="$lt_cv_path_NM" |
| else |
| @@ -4693,8 +5643,8 @@ |
| do |
| # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. |
| set dummy $ac_tool_prefix$ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_DUMPBIN+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4707,25 +5657,27 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| DUMPBIN=$ac_cv_prog_DUMPBIN |
| if test -n "$DUMPBIN"; then |
| - echo "$as_me:$LINENO: result: $DUMPBIN" >&5 |
| -echo "${ECHO_T}$DUMPBIN" >&6 |
| + { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 |
| +echo "${ECHO_T}$DUMPBIN" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$DUMPBIN" && break |
| done |
| fi |
| @@ -4735,8 +5687,8 @@ |
| do |
| # Extract the first word of "$ac_prog", so it can be a program name with args. |
| set dummy $ac_prog; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4749,30 +5701,45 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN |
| if test -n "$ac_ct_DUMPBIN"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 |
| -echo "${ECHO_T}$ac_ct_DUMPBIN" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 |
| +echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| test -n "$ac_ct_DUMPBIN" && break |
| done |
| -test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":" |
| |
| - DUMPBIN=$ac_ct_DUMPBIN |
| + if test "x$ac_ct_DUMPBIN" = x; then |
| + DUMPBIN=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + DUMPBIN=$ac_ct_DUMPBIN |
| + fi |
| fi |
| |
| |
| @@ -4787,43 +5754,43 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 |
| -echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 |
| +echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } |
| if test "${lt_cv_nm_interface+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| lt_cv_nm_interface="BSD nm" |
| echo "int some_variable = 0;" > conftest.$ac_ext |
| - (eval echo "\"\$as_me:4797: $ac_compile\"" >&5) |
| + (eval echo "\"\$as_me:5764: $ac_compile\"" >&5) |
| (eval "$ac_compile" 2>conftest.err) |
| cat conftest.err >&5 |
| - (eval echo "\"\$as_me:4800: $NM \\\"conftest.$ac_objext\\\"\"" >&5) |
| + (eval echo "\"\$as_me:5767: $NM \\\"conftest.$ac_objext\\\"\"" >&5) |
| (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) |
| cat conftest.err >&5 |
| - (eval echo "\"\$as_me:4803: output\"" >&5) |
| + (eval echo "\"\$as_me:5770: output\"" >&5) |
| cat conftest.out >&5 |
| if $GREP 'External.*some_variable' conftest.out > /dev/null; then |
| lt_cv_nm_interface="MS dumpbin" |
| fi |
| rm -f conftest* |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 |
| -echo "${ECHO_T}$lt_cv_nm_interface" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 |
| +echo "${ECHO_T}$lt_cv_nm_interface" >&6; } |
| |
| -echo "$as_me:$LINENO: checking whether ln -s works" >&5 |
| -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 |
| +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } |
| LN_S=$as_ln_s |
| if test "$LN_S" = "ln -s"; then |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 |
| -echo "${ECHO_T}no, using $LN_S" >&6 |
| + { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 |
| +echo "${ECHO_T}no, using $LN_S" >&6; } |
| fi |
| |
| # find the maximum length of command line arguments |
| -echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 |
| -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 |
| +echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } |
| if test "${lt_cv_sys_max_cmd_len+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -4942,11 +5909,11 @@ |
| fi |
| |
| if test -n $lt_cv_sys_max_cmd_len ; then |
| - echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 |
| -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 |
| + { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 |
| +echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: none" >&5 |
| -echo "${ECHO_T}none" >&6 |
| + { echo "$as_me:$LINENO: result: none" >&5 |
| +echo "${ECHO_T}none" >&6; } |
| fi |
| max_cmd_len=$lt_cv_sys_max_cmd_len |
| |
| @@ -4959,8 +5926,8 @@ |
| : ${MV="mv -f"} |
| : ${RM="rm -f"} |
| |
| -echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 |
| -echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 |
| +echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } |
| # Try some XSI features |
| xsi_shell=no |
| ( _lt_dummy="a/b/c" |
| @@ -4969,18 +5936,18 @@ |
| && eval 'test $(( 1 + 1 )) -eq 2 \ |
| && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ |
| && xsi_shell=yes |
| -echo "$as_me:$LINENO: result: $xsi_shell" >&5 |
| -echo "${ECHO_T}$xsi_shell" >&6 |
| +{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 |
| +echo "${ECHO_T}$xsi_shell" >&6; } |
| |
| |
| -echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 |
| -echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 |
| +echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } |
| lt_shell_append=no |
| ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ |
| >/dev/null 2>&1 \ |
| && lt_shell_append=yes |
| -echo "$as_me:$LINENO: result: $lt_shell_append" >&5 |
| -echo "${ECHO_T}$lt_shell_append" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 |
| +echo "${ECHO_T}$lt_shell_append" >&6; } |
| |
| |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| @@ -5014,15 +5981,15 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 |
| -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 |
| +echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } |
| if test "${lt_cv_ld_reload_flag+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| lt_cv_ld_reload_flag='-r' |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 |
| -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 |
| +echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } |
| reload_flag=$lt_cv_ld_reload_flag |
| case $reload_flag in |
| "" | " "*) ;; |
| @@ -5050,8 +6017,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5064,32 +6031,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OBJDUMP=$ac_cv_prog_OBJDUMP |
| if test -n "$OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| -echo "${ECHO_T}$OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 |
| +echo "${ECHO_T}$OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OBJDUMP"; then |
| ac_ct_OBJDUMP=$OBJDUMP |
| # Extract the first word of "objdump", so it can be a program name with args. |
| set dummy objdump; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5102,27 +6071,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OBJDUMP="objdump" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" |
| fi |
| fi |
| ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP |
| if test -n "$ac_ct_OBJDUMP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 |
| +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OBJDUMP=$ac_ct_OBJDUMP |
| + if test "x$ac_ct_OBJDUMP" = x; then |
| + OBJDUMP="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OBJDUMP=$ac_ct_OBJDUMP |
| + fi |
| else |
| OBJDUMP="$ac_cv_prog_OBJDUMP" |
| fi |
| @@ -5134,8 +6117,8 @@ |
| |
| |
| |
| -echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 |
| -echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 |
| +echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } |
| if test "${lt_cv_deplibs_check_method+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5330,8 +6313,8 @@ |
| esac |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 |
| -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 |
| +echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } |
| file_magic_cmd=$lt_cv_file_magic_cmd |
| deplibs_check_method=$lt_cv_deplibs_check_method |
| test -z "$deplibs_check_method" && deplibs_check_method=unknown |
| @@ -5350,8 +6333,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5364,32 +6347,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_AR="${ac_tool_prefix}ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| AR=$ac_cv_prog_AR |
| if test -n "$AR"; then |
| - echo "$as_me:$LINENO: result: $AR" >&5 |
| -echo "${ECHO_T}$AR" >&6 |
| + { echo "$as_me:$LINENO: result: $AR" >&5 |
| +echo "${ECHO_T}$AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_AR"; then |
| ac_ct_AR=$AR |
| # Extract the first word of "ar", so it can be a program name with args. |
| set dummy ar; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_AR+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5402,27 +6387,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_AR="ar" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" |
| fi |
| fi |
| ac_ct_AR=$ac_cv_prog_ac_ct_AR |
| if test -n "$ac_ct_AR"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| -echo "${ECHO_T}$ac_ct_AR" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
| +echo "${ECHO_T}$ac_ct_AR" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - AR=$ac_ct_AR |
| + if test "x$ac_ct_AR" = x; then |
| + AR="false" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + AR=$ac_ct_AR |
| + fi |
| else |
| AR="$ac_cv_prog_AR" |
| fi |
| @@ -5443,8 +6442,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5457,32 +6456,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_STRIP="${ac_tool_prefix}strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| STRIP=$ac_cv_prog_STRIP |
| if test -n "$STRIP"; then |
| - echo "$as_me:$LINENO: result: $STRIP" >&5 |
| -echo "${ECHO_T}$STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $STRIP" >&5 |
| +echo "${ECHO_T}$STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_STRIP"; then |
| ac_ct_STRIP=$STRIP |
| # Extract the first word of "strip", so it can be a program name with args. |
| set dummy strip; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5495,27 +6496,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_STRIP="strip" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" |
| fi |
| fi |
| ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP |
| if test -n "$ac_ct_STRIP"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| -echo "${ECHO_T}$ac_ct_STRIP" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
| +echo "${ECHO_T}$ac_ct_STRIP" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - STRIP=$ac_ct_STRIP |
| + if test "x$ac_ct_STRIP" = x; then |
| + STRIP=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + STRIP=$ac_ct_STRIP |
| + fi |
| else |
| STRIP="$ac_cv_prog_STRIP" |
| fi |
| @@ -5530,8 +6545,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5544,32 +6559,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| RANLIB=$ac_cv_prog_RANLIB |
| if test -n "$RANLIB"; then |
| - echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| -echo "${ECHO_T}$RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $RANLIB" >&5 |
| +echo "${ECHO_T}$RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_RANLIB"; then |
| ac_ct_RANLIB=$RANLIB |
| # Extract the first word of "ranlib", so it can be a program name with args. |
| set dummy ranlib; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5582,27 +6599,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_RANLIB="ranlib" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" |
| fi |
| fi |
| ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
| if test -n "$ac_ct_RANLIB"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| -echo "${ECHO_T}$ac_ct_RANLIB" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
| +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - RANLIB=$ac_ct_RANLIB |
| + if test "x$ac_ct_RANLIB" = x; then |
| + RANLIB=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + RANLIB=$ac_ct_RANLIB |
| + fi |
| else |
| RANLIB="$ac_cv_prog_RANLIB" |
| fi |
| @@ -5675,8 +6706,8 @@ |
| |
| |
| # Check for command to grab the raw symbol name followed by C symbol from nm. |
| -echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 |
| -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 |
| +echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } |
| if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -5895,11 +6926,11 @@ |
| lt_cv_sys_global_symbol_to_cdecl= |
| fi |
| if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then |
| - echo "$as_me:$LINENO: result: failed" >&5 |
| -echo "${ECHO_T}failed" >&6 |
| + { echo "$as_me:$LINENO: result: failed" >&5 |
| +echo "${ECHO_T}failed" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: ok" >&5 |
| -echo "${ECHO_T}ok" >&6 |
| + { echo "$as_me:$LINENO: result: ok" >&5 |
| +echo "${ECHO_T}ok" >&6; } |
| fi |
| |
| |
| @@ -5924,11 +6955,11 @@ |
| |
| |
| |
| -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. |
| +# Check whether --enable-libtool-lock was given. |
| if test "${enable_libtool_lock+set}" = set; then |
| - enableval="$enable_libtool_lock" |
| + enableval=$enable_libtool_lock; |
| +fi |
| |
| -fi; |
| test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes |
| |
| # Some flags need to be propagated to the compiler or linker for good |
| @@ -5955,7 +6986,7 @@ |
| ;; |
| *-*-irix6*) |
| # Find out which ABI we are using. |
| - echo '#line 5958 "configure"' > conftest.$ac_ext |
| + echo '#line 6989 "configure"' > conftest.$ac_ext |
| if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| (eval $ac_compile) 2>&5 |
| ac_status=$? |
| @@ -6047,8 +7078,8 @@ |
| # On SCO OpenServer 5, we need -belf to get full-featured binaries. |
| SAVE_CFLAGS="$CFLAGS" |
| CFLAGS="$CFLAGS -belf" |
| - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 |
| -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 |
| +echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } |
| if test "${lt_cv_cc_needs_belf+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6074,35 +7105,32 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| lt_cv_cc_needs_belf=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -lt_cv_cc_needs_belf=no |
| + lt_cv_cc_needs_belf=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| ac_ext=c |
| ac_cpp='$CPP $CPPFLAGS' |
| @@ -6111,8 +7139,8 @@ |
| ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 |
| -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 |
| +echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } |
| if test x"$lt_cv_cc_needs_belf" != x"yes"; then |
| # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf |
| CFLAGS="$SAVE_CFLAGS" |
| @@ -6151,8 +7179,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_DSYMUTIL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6165,32 +7193,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| DSYMUTIL=$ac_cv_prog_DSYMUTIL |
| if test -n "$DSYMUTIL"; then |
| - echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 |
| -echo "${ECHO_T}$DSYMUTIL" >&6 |
| + { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 |
| +echo "${ECHO_T}$DSYMUTIL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_DSYMUTIL"; then |
| ac_ct_DSYMUTIL=$DSYMUTIL |
| # Extract the first word of "dsymutil", so it can be a program name with args. |
| set dummy dsymutil; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6203,27 +7233,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":" |
| fi |
| fi |
| ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL |
| if test -n "$ac_ct_DSYMUTIL"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 |
| -echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 |
| +echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - DSYMUTIL=$ac_ct_DSYMUTIL |
| + if test "x$ac_ct_DSYMUTIL" = x; then |
| + DSYMUTIL=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + DSYMUTIL=$ac_ct_DSYMUTIL |
| + fi |
| else |
| DSYMUTIL="$ac_cv_prog_DSYMUTIL" |
| fi |
| @@ -6231,8 +7275,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}nmedit; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_NMEDIT+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6245,32 +7289,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| NMEDIT=$ac_cv_prog_NMEDIT |
| if test -n "$NMEDIT"; then |
| - echo "$as_me:$LINENO: result: $NMEDIT" >&5 |
| -echo "${ECHO_T}$NMEDIT" >&6 |
| + { echo "$as_me:$LINENO: result: $NMEDIT" >&5 |
| +echo "${ECHO_T}$NMEDIT" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_NMEDIT"; then |
| ac_ct_NMEDIT=$NMEDIT |
| # Extract the first word of "nmedit", so it can be a program name with args. |
| set dummy nmedit; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6283,27 +7329,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_NMEDIT="nmedit" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":" |
| fi |
| fi |
| ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT |
| if test -n "$ac_ct_NMEDIT"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 |
| -echo "${ECHO_T}$ac_ct_NMEDIT" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 |
| +echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - NMEDIT=$ac_ct_NMEDIT |
| + if test "x$ac_ct_NMEDIT" = x; then |
| + NMEDIT=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + NMEDIT=$ac_ct_NMEDIT |
| + fi |
| else |
| NMEDIT="$ac_cv_prog_NMEDIT" |
| fi |
| @@ -6311,8 +7371,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}lipo; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_LIPO+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6325,32 +7385,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_LIPO="${ac_tool_prefix}lipo" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| LIPO=$ac_cv_prog_LIPO |
| if test -n "$LIPO"; then |
| - echo "$as_me:$LINENO: result: $LIPO" >&5 |
| -echo "${ECHO_T}$LIPO" >&6 |
| + { echo "$as_me:$LINENO: result: $LIPO" >&5 |
| +echo "${ECHO_T}$LIPO" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_LIPO"; then |
| ac_ct_LIPO=$LIPO |
| # Extract the first word of "lipo", so it can be a program name with args. |
| set dummy lipo; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6363,27 +7425,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_LIPO="lipo" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":" |
| fi |
| fi |
| ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO |
| if test -n "$ac_ct_LIPO"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 |
| -echo "${ECHO_T}$ac_ct_LIPO" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 |
| +echo "${ECHO_T}$ac_ct_LIPO" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - LIPO=$ac_ct_LIPO |
| + if test "x$ac_ct_LIPO" = x; then |
| + LIPO=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + LIPO=$ac_ct_LIPO |
| + fi |
| else |
| LIPO="$ac_cv_prog_LIPO" |
| fi |
| @@ -6391,8 +7467,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}otool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6405,32 +7481,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OTOOL="${ac_tool_prefix}otool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OTOOL=$ac_cv_prog_OTOOL |
| if test -n "$OTOOL"; then |
| - echo "$as_me:$LINENO: result: $OTOOL" >&5 |
| -echo "${ECHO_T}$OTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $OTOOL" >&5 |
| +echo "${ECHO_T}$OTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OTOOL"; then |
| ac_ct_OTOOL=$OTOOL |
| # Extract the first word of "otool", so it can be a program name with args. |
| set dummy otool; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6443,27 +7521,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OTOOL="otool" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":" |
| fi |
| fi |
| ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL |
| if test -n "$ac_ct_OTOOL"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 |
| -echo "${ECHO_T}$ac_ct_OTOOL" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 |
| +echo "${ECHO_T}$ac_ct_OTOOL" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OTOOL=$ac_ct_OTOOL |
| + if test "x$ac_ct_OTOOL" = x; then |
| + OTOOL=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OTOOL=$ac_ct_OTOOL |
| + fi |
| else |
| OTOOL="$ac_cv_prog_OTOOL" |
| fi |
| @@ -6471,8 +7563,8 @@ |
| if test -n "$ac_tool_prefix"; then |
| # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. |
| set dummy ${ac_tool_prefix}otool64; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_OTOOL64+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6485,32 +7577,34 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| fi |
| fi |
| OTOOL64=$ac_cv_prog_OTOOL64 |
| if test -n "$OTOOL64"; then |
| - echo "$as_me:$LINENO: result: $OTOOL64" >&5 |
| -echo "${ECHO_T}$OTOOL64" >&6 |
| + { echo "$as_me:$LINENO: result: $OTOOL64" >&5 |
| +echo "${ECHO_T}$OTOOL64" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| + |
| fi |
| if test -z "$ac_cv_prog_OTOOL64"; then |
| ac_ct_OTOOL64=$OTOOL64 |
| # Extract the first word of "otool64", so it can be a program name with args. |
| set dummy otool64; ac_word=$2 |
| -echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 |
| +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } |
| if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6523,27 +7617,41 @@ |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| for ac_exec_ext in '' $ac_executable_extensions; do |
| - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
| + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
| ac_cv_prog_ac_ct_OTOOL64="otool64" |
| echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
| break 2 |
| fi |
| done |
| done |
| +IFS=$as_save_IFS |
| |
| - test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":" |
| fi |
| fi |
| ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 |
| if test -n "$ac_ct_OTOOL64"; then |
| - echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 |
| -echo "${ECHO_T}$ac_ct_OTOOL64" >&6 |
| + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 |
| +echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| - OTOOL64=$ac_ct_OTOOL64 |
| + if test "x$ac_ct_OTOOL64" = x; then |
| + OTOOL64=":" |
| + else |
| + case $cross_compiling:$ac_tool_warned in |
| +yes:) |
| +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&5 |
| +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools |
| +whose name does not start with the host triplet. If you think this |
| +configuration is useful to you, please write to autoconf@gnu.org." >&2;} |
| +ac_tool_warned=yes ;; |
| +esac |
| + OTOOL64=$ac_ct_OTOOL64 |
| + fi |
| else |
| OTOOL64="$ac_cv_prog_OTOOL64" |
| fi |
| @@ -6574,8 +7682,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 |
| -echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 |
| +echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } |
| if test "${lt_cv_apple_cc_single_mod+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6601,10 +7709,10 @@ |
| rm -f conftest.* |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 |
| -echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6 |
| - echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 |
| -echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 |
| +echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } |
| + { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 |
| +echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } |
| if test "${lt_cv_ld_exported_symbols_list+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6628,41 +7736,38 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| lt_cv_ld_exported_symbols_list=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -lt_cv_ld_exported_symbols_list=no |
| + lt_cv_ld_exported_symbols_list=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LDFLAGS="$save_LDFLAGS" |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 |
| -echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 |
| +echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } |
| case $host_os in |
| rhapsody* | darwin1.[012]) |
| _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; |
| @@ -6703,8 +7808,8 @@ |
| ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 |
| -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 |
| +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } |
| # On Suns, sometimes $CPP names a directory. |
| if test -n "$CPP" && test -d "$CPP"; then |
| CPP= |
| @@ -6738,24 +7843,22 @@ |
| #endif |
| Syntax error |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| : |
| else |
| echo "$as_me: failed program was:" >&5 |
| @@ -6764,9 +7867,10 @@ |
| # Broken: fails on valid input. |
| continue |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| - # OK, works on sane cases. Now check whether non-existent headers |
| + # OK, works on sane cases. Now check whether nonexistent headers |
| # can be detected and how. |
| cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| @@ -6776,24 +7880,22 @@ |
| /* end confdefs.h. */ |
| #include <ac_nonexistent.h> |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| # Broken: success on invalid input. |
| continue |
| else |
| @@ -6804,6 +7906,7 @@ |
| ac_preproc_ok=: |
| break |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| done |
| @@ -6821,8 +7924,8 @@ |
| else |
| ac_cv_prog_CPP=$CPP |
| fi |
| -echo "$as_me:$LINENO: result: $CPP" >&5 |
| -echo "${ECHO_T}$CPP" >&6 |
| +{ echo "$as_me:$LINENO: result: $CPP" >&5 |
| +echo "${ECHO_T}$CPP" >&6; } |
| ac_preproc_ok=false |
| for ac_c_preproc_warn_flag in '' yes |
| do |
| @@ -6845,24 +7948,22 @@ |
| #endif |
| Syntax error |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| : |
| else |
| echo "$as_me: failed program was:" >&5 |
| @@ -6871,9 +7972,10 @@ |
| # Broken: fails on valid input. |
| continue |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| - # OK, works on sane cases. Now check whether non-existent headers |
| + # OK, works on sane cases. Now check whether nonexistent headers |
| # can be detected and how. |
| cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| @@ -6883,24 +7985,22 @@ |
| /* end confdefs.h. */ |
| #include <ac_nonexistent.h> |
| _ACEOF |
| -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
| - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
| +if { (ac_try="$ac_cpp conftest.$ac_ext" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } >/dev/null; then |
| - if test -s conftest.err; then |
| - ac_cpp_err=$ac_c_preproc_warn_flag |
| - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag |
| - else |
| - ac_cpp_err= |
| - fi |
| -else |
| - ac_cpp_err=yes |
| -fi |
| -if test -z "$ac_cpp_err"; then |
| + (exit $ac_status); } >/dev/null && { |
| + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + }; then |
| # Broken: success on invalid input. |
| continue |
| else |
| @@ -6911,6 +8011,7 @@ |
| ac_preproc_ok=: |
| break |
| fi |
| + |
| rm -f conftest.err conftest.$ac_ext |
| |
| done |
| @@ -6933,8 +8034,8 @@ |
| ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| |
| |
| -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 |
| -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 |
| +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } |
| if test "${ac_cv_header_stdc+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -6958,35 +8059,31 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| ac_cv_header_stdc=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_header_stdc=no |
| + ac_cv_header_stdc=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| |
| if test $ac_cv_header_stdc = yes; then |
| # SunOS 4.x string.h does not declare mem*, contrary to ANSI. |
| @@ -7042,6 +8139,7 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| #include <ctype.h> |
| +#include <stdlib.h> |
| #if ((' ' & 0x0FF) == 0x020) |
| # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') |
| # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) |
| @@ -7061,18 +8159,27 @@ |
| for (i = 0; i < 256; i++) |
| if (XOR (islower (i), ISLOWER (i)) |
| || toupper (i) != TOUPPER (i)) |
| - exit(2); |
| - exit (0); |
| + return 2; |
| + return 0; |
| } |
| _ACEOF |
| rm -f conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>&5 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } && { ac_try='./conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| + { (case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_try") 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); }; }; then |
| @@ -7085,12 +8192,14 @@ |
| ( exit $ac_status ) |
| ac_cv_header_stdc=no |
| fi |
| -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
| +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
| fi |
| + |
| + |
| fi |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 |
| -echo "${ECHO_T}$ac_cv_header_stdc" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 |
| +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } |
| if test $ac_cv_header_stdc = yes; then |
| |
| cat >>confdefs.h <<\_ACEOF |
| @@ -7113,9 +8222,9 @@ |
| inttypes.h stdint.h unistd.h |
| do |
| as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` |
| -echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 |
| -if eval "test \"\${$as_ac_Header+set}\" = set"; then |
| +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } |
| +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| cat >conftest.$ac_ext <<_ACEOF |
| @@ -7129,38 +8238,35 @@ |
| #include <$ac_header> |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| eval "$as_ac_Header=yes" |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -eval "$as_ac_Header=no" |
| + eval "$as_ac_Header=no" |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 |
| -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 |
| +ac_res=`eval echo '${'$as_ac_Header'}'` |
| + { echo "$as_me:$LINENO: result: $ac_res" >&5 |
| +echo "${ECHO_T}$ac_res" >&6; } |
| if test `eval echo '${'$as_ac_Header'}'` = yes; then |
| cat >>confdefs.h <<_ACEOF |
| #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 |
| @@ -7175,9 +8281,9 @@ |
| for ac_header in dlfcn.h |
| do |
| as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` |
| -echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 |
| -if eval "test \"\${$as_ac_Header+set}\" = set"; then |
| +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 |
| +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } |
| +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| cat >conftest.$ac_ext <<_ACEOF |
| @@ -7191,38 +8297,35 @@ |
| #include <$ac_header> |
| _ACEOF |
| rm -f conftest.$ac_objext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| - (eval $ac_compile) 2>conftest.er1 |
| +if { (ac_try="$ac_compile" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_compile") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest.$ac_objext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest.$ac_objext; then |
| eval "$as_ac_Header=yes" |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -eval "$as_ac_Header=no" |
| + eval "$as_ac_Header=no" |
| fi |
| -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 |
| -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 |
| +ac_res=`eval echo '${'$as_ac_Header'}'` |
| + { echo "$as_me:$LINENO: result: $ac_res" >&5 |
| +echo "${ECHO_T}$ac_res" >&6; } |
| if test `eval echo '${'$as_ac_Header'}'` = yes; then |
| cat >>confdefs.h <<_ACEOF |
| #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 |
| @@ -7242,10 +8345,9 @@ |
| |
| |
| |
| - # Check whether --enable-shared or --disable-shared was given. |
| + # Check whether --enable-shared was given. |
| if test "${enable_shared+set}" = set; then |
| - enableval="$enable_shared" |
| - p=${PACKAGE-default} |
| + enableval=$enable_shared; p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_shared=yes ;; |
| no) enable_shared=no ;; |
| @@ -7264,7 +8366,7 @@ |
| esac |
| else |
| enable_shared=yes |
| -fi; |
| +fi |
| |
| |
| |
| @@ -7273,10 +8375,10 @@ |
| |
| |
| |
| - # Check whether --enable-static or --disable-static was given. |
| + |
| + # Check whether --enable-static was given. |
| if test "${enable_static+set}" = set; then |
| - enableval="$enable_static" |
| - p=${PACKAGE-default} |
| + enableval=$enable_static; p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_static=yes ;; |
| no) enable_static=no ;; |
| @@ -7295,7 +8397,7 @@ |
| esac |
| else |
| enable_static=yes |
| -fi; |
| +fi |
| |
| |
| |
| @@ -7305,13 +8407,14 @@ |
| |
| |
| |
| -# Check whether --with-pic or --without-pic was given. |
| + |
| +# Check whether --with-pic was given. |
| if test "${with_pic+set}" = set; then |
| - withval="$with_pic" |
| - pic_mode="$withval" |
| + withval=$with_pic; pic_mode="$withval" |
| else |
| pic_mode=default |
| -fi; |
| +fi |
| + |
| |
| test -z "$pic_mode" && pic_mode=default |
| |
| @@ -7321,10 +8424,9 @@ |
| |
| |
| |
| - # Check whether --enable-fast-install or --disable-fast-install was given. |
| + # Check whether --enable-fast-install was given. |
| if test "${enable_fast_install+set}" = set; then |
| - enableval="$enable_fast_install" |
| - p=${PACKAGE-default} |
| + enableval=$enable_fast_install; p=${PACKAGE-default} |
| case $enableval in |
| yes) enable_fast_install=yes ;; |
| no) enable_fast_install=no ;; |
| @@ -7343,7 +8445,8 @@ |
| esac |
| else |
| enable_fast_install=yes |
| -fi; |
| +fi |
| + |
| |
| |
| |
| @@ -7403,8 +8506,8 @@ |
| setopt NO_GLOB_SUBST |
| fi |
| |
| -echo "$as_me:$LINENO: checking for objdir" >&5 |
| -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for objdir" >&5 |
| +echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } |
| if test "${lt_cv_objdir+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7418,8 +8521,8 @@ |
| fi |
| rmdir .libs 2>/dev/null |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 |
| -echo "${ECHO_T}$lt_cv_objdir" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 |
| +echo "${ECHO_T}$lt_cv_objdir" >&6; } |
| objdir=$lt_cv_objdir |
| |
| |
| @@ -7511,8 +8614,8 @@ |
| case $deplibs_check_method in |
| file_magic*) |
| if test "$file_magic_cmd" = '$MAGIC_CMD'; then |
| - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 |
| -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 |
| +echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } |
| if test "${lt_cv_path_MAGIC_CMD+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7564,11 +8667,11 @@ |
| |
| MAGIC_CMD="$lt_cv_path_MAGIC_CMD" |
| if test -n "$MAGIC_CMD"; then |
| - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| -echo "${ECHO_T}$MAGIC_CMD" >&6 |
| + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| +echo "${ECHO_T}$MAGIC_CMD" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| |
| @@ -7577,8 +8680,8 @@ |
| |
| if test -z "$lt_cv_path_MAGIC_CMD"; then |
| if test -n "$ac_tool_prefix"; then |
| - echo "$as_me:$LINENO: checking for file" >&5 |
| -echo $ECHO_N "checking for file... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for file" >&5 |
| +echo $ECHO_N "checking for file... $ECHO_C" >&6; } |
| if test "${lt_cv_path_MAGIC_CMD+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7630,11 +8733,11 @@ |
| |
| MAGIC_CMD="$lt_cv_path_MAGIC_CMD" |
| if test -n "$MAGIC_CMD"; then |
| - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| -echo "${ECHO_T}$MAGIC_CMD" >&6 |
| + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 |
| +echo "${ECHO_T}$MAGIC_CMD" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| |
| |
| @@ -7714,8 +8817,8 @@ |
| if test "$GCC" = yes; then |
| lt_prog_compiler_no_builtin_flag=' -fno-builtin' |
| |
| - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 |
| -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 |
| +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -7732,11 +8835,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:7735: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:8838: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>conftest.err) |
| ac_status=$? |
| cat conftest.err >&5 |
| - echo "$as_me:7739: \$? = $ac_status" >&5 |
| + echo "$as_me:8842: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s "$ac_outfile"; then |
| # The compiler can only warn and ignore the option if not recognized |
| # So say no if there are warnings other than the usual output. |
| @@ -7749,8 +8852,8 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } |
| |
| if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then |
| lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" |
| @@ -7769,8 +8872,8 @@ |
| lt_prog_compiler_pic= |
| lt_prog_compiler_static= |
| |
| -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 |
| -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 |
| +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } |
| |
| if test "$GCC" = yes; then |
| lt_prog_compiler_wl='-Wl,' |
| @@ -8041,8 +9144,8 @@ |
| lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" |
| ;; |
| esac |
| -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 |
| -echo "${ECHO_T}$lt_prog_compiler_pic" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 |
| +echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } |
| |
| |
| |
| @@ -8053,8 +9156,8 @@ |
| # Check to make sure the PIC flag actually works. |
| # |
| if test -n "$lt_prog_compiler_pic"; then |
| - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 |
| -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 |
| +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_pic_works+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8071,11 +9174,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:8074: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:9177: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>conftest.err) |
| ac_status=$? |
| cat conftest.err >&5 |
| - echo "$as_me:8078: \$? = $ac_status" >&5 |
| + echo "$as_me:9181: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s "$ac_outfile"; then |
| # The compiler can only warn and ignore the option if not recognized |
| # So say no if there are warnings other than the usual output. |
| @@ -8088,8 +9191,8 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } |
| |
| if test x"$lt_cv_prog_compiler_pic_works" = xyes; then |
| case $lt_prog_compiler_pic in |
| @@ -8112,8 +9215,8 @@ |
| # Check to make sure the static flag actually works. |
| # |
| wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" |
| -echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 |
| -echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 |
| +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_static_works+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8140,8 +9243,8 @@ |
| LDFLAGS="$save_LDFLAGS" |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } |
| |
| if test x"$lt_cv_prog_compiler_static_works" = xyes; then |
| : |
| @@ -8155,8 +9258,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_c_o+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8176,11 +9279,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:8179: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:9282: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>out/conftest.err) |
| ac_status=$? |
| cat out/conftest.err >&5 |
| - echo "$as_me:8183: \$? = $ac_status" >&5 |
| + echo "$as_me:9286: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s out/conftest2.$ac_objext |
| then |
| # The compiler can only warn and ignore the option if not recognized |
| @@ -8202,16 +9305,16 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } |
| |
| |
| |
| |
| |
| |
| - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 |
| +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } |
| if test "${lt_cv_prog_compiler_c_o+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -8231,11 +9334,11 @@ |
| -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ |
| -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ |
| -e 's:$: $lt_compiler_flag:'` |
| - (eval echo "\"\$as_me:8234: $lt_compile\"" >&5) |
| + (eval echo "\"\$as_me:9337: $lt_compile\"" >&5) |
| (eval "$lt_compile" 2>out/conftest.err) |
| ac_status=$? |
| cat out/conftest.err >&5 |
| - echo "$as_me:8238: \$? = $ac_status" >&5 |
| + echo "$as_me:9341: \$? = $ac_status" >&5 |
| if (exit $ac_status) && test -s out/conftest2.$ac_objext |
| then |
| # The compiler can only warn and ignore the option if not recognized |
| @@ -8257,8 +9360,8 @@ |
| $RM conftest* |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 |
| +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } |
| |
| |
| |
| @@ -8266,16 +9369,16 @@ |
| hard_links="nottested" |
| if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then |
| # do not overwrite the value of need_locks provided by the user |
| - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 |
| -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 |
| +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } |
| hard_links=yes |
| $RM conftest* |
| ln conftest.a conftest.b 2>/dev/null && hard_links=no |
| touch conftest.a |
| ln conftest.a conftest.b 2>&5 || hard_links=no |
| ln conftest.a conftest.b 2>/dev/null && hard_links=no |
| - echo "$as_me:$LINENO: result: $hard_links" >&5 |
| -echo "${ECHO_T}$hard_links" >&6 |
| + { echo "$as_me:$LINENO: result: $hard_links" >&5 |
| +echo "${ECHO_T}$hard_links" >&6; } |
| if test "$hard_links" = no; then |
| { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 |
| echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} |
| @@ -8290,8 +9393,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 |
| -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 |
| +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } |
| |
| runpath_var= |
| allow_undefined_flag= |
| @@ -8748,27 +9851,23 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| |
| lt_aix_libpath_sed=' |
| /Import File Strings/,/^$/ { |
| @@ -8786,8 +9885,10 @@ |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi |
| |
| @@ -8817,27 +9918,23 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| |
| lt_aix_libpath_sed=' |
| /Import File Strings/,/^$/ { |
| @@ -8855,8 +9952,10 @@ |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi |
| |
| @@ -9073,35 +10172,33 @@ |
| int foo(void) {} |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' |
| |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LDFLAGS="$save_LDFLAGS" |
| else |
| @@ -9358,8 +10455,8 @@ |
| fi |
| fi |
| |
| -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 |
| -echo "${ECHO_T}$ld_shlibs" >&6 |
| +{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 |
| +echo "${ECHO_T}$ld_shlibs" >&6; } |
| test "$ld_shlibs" = no && can_build_shared=no |
| |
| with_gnu_ld=$with_gnu_ld |
| @@ -9395,46 +10492,52 @@ |
| # Test whether the compiler implicitly links with -lc since on some |
| # systems, -lgcc has to come before -lc. If gcc already passes -lc |
| # to ld, don't add -lc before -lgcc. |
| - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 |
| -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 |
| - $RM conftest* |
| - echo "$lt_simple_compile_test_code" > conftest.$ac_ext |
| + { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 |
| +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } |
| +if test "${lt_cv_archive_cmds_need_lc+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + $RM conftest* |
| + echo "$lt_simple_compile_test_code" > conftest.$ac_ext |
| |
| - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
| (eval $ac_compile) 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } 2>conftest.err; then |
| - soname=conftest |
| - lib=conftest |
| - libobjs=conftest.$ac_objext |
| - deplibs= |
| - wl=$lt_prog_compiler_wl |
| - pic_flag=$lt_prog_compiler_pic |
| - compiler_flags=-v |
| - linker_flags=-v |
| - verstring= |
| - output_objdir=. |
| - libname=conftest |
| - lt_save_allow_undefined_flag=$allow_undefined_flag |
| - allow_undefined_flag= |
| - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 |
| + soname=conftest |
| + lib=conftest |
| + libobjs=conftest.$ac_objext |
| + deplibs= |
| + wl=$lt_prog_compiler_wl |
| + pic_flag=$lt_prog_compiler_pic |
| + compiler_flags=-v |
| + linker_flags=-v |
| + verstring= |
| + output_objdir=. |
| + libname=conftest |
| + lt_save_allow_undefined_flag=$allow_undefined_flag |
| + allow_undefined_flag= |
| + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 |
| (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| (exit $ac_status); } |
| - then |
| - archive_cmds_need_lc=no |
| - else |
| - archive_cmds_need_lc=yes |
| - fi |
| - allow_undefined_flag=$lt_save_allow_undefined_flag |
| - else |
| - cat conftest.err 1>&5 |
| - fi |
| - $RM conftest* |
| - echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 |
| -echo "${ECHO_T}$archive_cmds_need_lc" >&6 |
| + then |
| + lt_cv_archive_cmds_need_lc=no |
| + else |
| + lt_cv_archive_cmds_need_lc=yes |
| + fi |
| + allow_undefined_flag=$lt_save_allow_undefined_flag |
| + else |
| + cat conftest.err 1>&5 |
| + fi |
| + $RM conftest* |
| + |
| +fi |
| +{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 |
| +echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; } |
| + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc |
| ;; |
| esac |
| fi |
| @@ -9597,8 +10700,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 |
| -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 |
| +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } |
| |
| if test "$GCC" = yes; then |
| case $host_os in |
| @@ -10014,12 +11117,17 @@ |
| finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' |
| shlibpath_var=LD_LIBRARY_PATH |
| shlibpath_overrides_runpath=no |
| + |
| # Some binutils ld are patched to set DT_RUNPATH |
| - save_LDFLAGS=$LDFLAGS |
| - save_libdir=$libdir |
| - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ |
| - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" |
| - cat >conftest.$ac_ext <<_ACEOF |
| + if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then |
| + echo $ECHO_N "(cached) $ECHO_C" >&6 |
| +else |
| + lt_cv_shlibpath_overrides_runpath=no |
| + save_LDFLAGS=$LDFLAGS |
| + save_libdir=$libdir |
| + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ |
| + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" |
| + cat >conftest.$ac_ext <<_ACEOF |
| /* confdefs.h. */ |
| _ACEOF |
| cat confdefs.h >>conftest.$ac_ext |
| @@ -10035,40 +11143,42 @@ |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then |
| - shlibpath_overrides_runpath=yes |
| + lt_cv_shlibpath_overrides_runpath=yes |
| fi |
| |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| + |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| - LDFLAGS=$save_LDFLAGS |
| - libdir=$save_libdir |
| + LDFLAGS=$save_LDFLAGS |
| + libdir=$save_libdir |
| + |
| +fi |
| + |
| + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath |
| |
| # This implies no fast_install, which is unacceptable. |
| # Some rework will be needed to allow for fast_install |
| @@ -10278,8 +11388,8 @@ |
| dynamic_linker=no |
| ;; |
| esac |
| -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 |
| -echo "${ECHO_T}$dynamic_linker" >&6 |
| +{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 |
| +echo "${ECHO_T}$dynamic_linker" >&6; } |
| test "$dynamic_linker" = no && can_build_shared=no |
| |
| variables_saved_for_relink="PATH $shlibpath_var $runpath_var" |
| @@ -10380,8 +11490,8 @@ |
| |
| |
| |
| - echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 |
| -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 |
| +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } |
| hardcode_action= |
| if test -n "$hardcode_libdir_flag_spec" || |
| test -n "$runpath_var" || |
| @@ -10405,8 +11515,8 @@ |
| # directories. |
| hardcode_action=unsupported |
| fi |
| -echo "$as_me:$LINENO: result: $hardcode_action" >&5 |
| -echo "${ECHO_T}$hardcode_action" >&6 |
| +{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 |
| +echo "${ECHO_T}$hardcode_action" >&6; } |
| |
| if test "$hardcode_action" = relink || |
| test "$inherit_rpath" = yes; then |
| @@ -10450,8 +11560,8 @@ |
| |
| darwin*) |
| # if libdl is installed we need to link against it |
| - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dl_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10464,56 +11574,53 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| int |
| main () |
| { |
| -dlopen (); |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dl_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dl_dlopen=no |
| + ac_cv_lib_dl_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } |
| if test $ac_cv_lib_dl_dlopen = yes; then |
| lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" |
| else |
| @@ -10527,8 +11634,8 @@ |
| ;; |
| |
| *) |
| - echo "$as_me:$LINENO: checking for shl_load" >&5 |
| -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for shl_load" >&5 |
| +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } |
| if test "${ac_cv_func_shl_load+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10555,73 +11662,64 @@ |
| |
| #undef shl_load |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| -{ |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char shl_load (); |
| /* The GNU C library defines this for functions which it implements |
| to always fail with ENOSYS. Some functions are actually named |
| something starting with __ and the normal name is an alias. */ |
| -#if defined (__stub_shl_load) || defined (__stub___shl_load) |
| +#if defined __stub_shl_load || defined __stub___shl_load |
| choke me |
| -#else |
| -char (*f) () = shl_load; |
| -#endif |
| -#ifdef __cplusplus |
| -} |
| #endif |
| |
| int |
| main () |
| { |
| -return f != shl_load; |
| +return shl_load (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_func_shl_load=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_func_shl_load=no |
| + ac_cv_func_shl_load=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 |
| -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 |
| +echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } |
| if test $ac_cv_func_shl_load = yes; then |
| lt_cv_dlopen="shl_load" |
| else |
| - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 |
| -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 |
| +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dld_shl_load+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10634,61 +11732,58 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char shl_load (); |
| int |
| main () |
| { |
| -shl_load (); |
| +return shl_load (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dld_shl_load=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dld_shl_load=no |
| + ac_cv_lib_dld_shl_load=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } |
| if test $ac_cv_lib_dld_shl_load = yes; then |
| lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" |
| else |
| - echo "$as_me:$LINENO: checking for dlopen" >&5 |
| -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen" >&5 |
| +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } |
| if test "${ac_cv_func_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10715,73 +11810,64 @@ |
| |
| #undef dlopen |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| -{ |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| /* The GNU C library defines this for functions which it implements |
| to always fail with ENOSYS. Some functions are actually named |
| something starting with __ and the normal name is an alias. */ |
| -#if defined (__stub_dlopen) || defined (__stub___dlopen) |
| +#if defined __stub_dlopen || defined __stub___dlopen |
| choke me |
| -#else |
| -char (*f) () = dlopen; |
| -#endif |
| -#ifdef __cplusplus |
| -} |
| #endif |
| |
| int |
| main () |
| { |
| -return f != dlopen; |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_func_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_func_dlopen=no |
| + ac_cv_func_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } |
| if test $ac_cv_func_dlopen = yes; then |
| lt_cv_dlopen="dlopen" |
| else |
| - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 |
| +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dl_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10794,61 +11880,58 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| int |
| main () |
| { |
| -dlopen (); |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dl_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dl_dlopen=no |
| + ac_cv_lib_dl_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } |
| if test $ac_cv_lib_dl_dlopen = yes; then |
| lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" |
| else |
| - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 |
| -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 |
| +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_svld_dlopen+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10861,61 +11944,58 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dlopen (); |
| int |
| main () |
| { |
| -dlopen (); |
| +return dlopen (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_svld_dlopen=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_svld_dlopen=no |
| + ac_cv_lib_svld_dlopen=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } |
| if test $ac_cv_lib_svld_dlopen = yes; then |
| lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" |
| else |
| - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 |
| -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 |
| +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } |
| if test "${ac_cv_lib_dld_dld_link+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -10928,56 +12008,53 @@ |
| cat >>conftest.$ac_ext <<_ACEOF |
| /* end confdefs.h. */ |
| |
| -/* Override any gcc2 internal prototype to avoid an error. */ |
| +/* Override any GCC internal prototype to avoid an error. |
| + Use char because int might match the return type of a GCC |
| + builtin and then its argument prototype would still apply. */ |
| #ifdef __cplusplus |
| extern "C" |
| #endif |
| -/* We use char because int might match the return type of a gcc2 |
| - builtin and then its argument prototype would still apply. */ |
| char dld_link (); |
| int |
| main () |
| { |
| -dld_link (); |
| +return dld_link (); |
| ; |
| return 0; |
| } |
| _ACEOF |
| rm -f conftest.$ac_objext conftest$ac_exeext |
| -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
| - (eval $ac_link) 2>conftest.er1 |
| +if { (ac_try="$ac_link" |
| +case "(($ac_try" in |
| + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
| + *) ac_try_echo=$ac_try;; |
| +esac |
| +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 |
| + (eval "$ac_link") 2>conftest.er1 |
| ac_status=$? |
| grep -v '^ *+' conftest.er1 >conftest.err |
| rm -f conftest.er1 |
| cat conftest.err >&5 |
| echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); } && |
| - { ac_try='test -z "$ac_c_werror_flag" |
| - || test ! -s conftest.err' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; } && |
| - { ac_try='test -s conftest$ac_exeext' |
| - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
| - (eval $ac_try) 2>&5 |
| - ac_status=$? |
| - echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
| - (exit $ac_status); }; }; then |
| + (exit $ac_status); } && { |
| + test -z "$ac_c_werror_flag" || |
| + test ! -s conftest.err |
| + } && test -s conftest$ac_exeext && |
| + $as_test_x conftest$ac_exeext; then |
| ac_cv_lib_dld_dld_link=yes |
| else |
| echo "$as_me: failed program was:" >&5 |
| sed 's/^/| /' conftest.$ac_ext >&5 |
| |
| -ac_cv_lib_dld_dld_link=no |
| + ac_cv_lib_dld_dld_link=no |
| fi |
| -rm -f conftest.err conftest.$ac_objext \ |
| + |
| +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ |
| conftest$ac_exeext conftest.$ac_ext |
| LIBS=$ac_check_lib_save_LIBS |
| fi |
| -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 |
| -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 |
| +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 |
| +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } |
| if test $ac_cv_lib_dld_dld_link = yes; then |
| lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" |
| fi |
| @@ -11017,8 +12094,8 @@ |
| save_LIBS="$LIBS" |
| LIBS="$lt_cv_dlopen_libs $LIBS" |
| |
| - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 |
| -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 |
| +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } |
| if test "${lt_cv_dlopen_self+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -11028,7 +12105,7 @@ |
| lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 |
| lt_status=$lt_dlunknown |
| cat > conftest.$ac_ext <<_LT_EOF |
| -#line 11031 "configure" |
| +#line 12108 "configure" |
| #include "confdefs.h" |
| |
| #if HAVE_DLFCN_H |
| @@ -11108,13 +12185,13 @@ |
| |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 |
| -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 |
| +echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } |
| |
| if test "x$lt_cv_dlopen_self" = xyes; then |
| wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" |
| - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 |
| -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 |
| +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } |
| if test "${lt_cv_dlopen_self_static+set}" = set; then |
| echo $ECHO_N "(cached) $ECHO_C" >&6 |
| else |
| @@ -11124,7 +12201,7 @@ |
| lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 |
| lt_status=$lt_dlunknown |
| cat > conftest.$ac_ext <<_LT_EOF |
| -#line 11127 "configure" |
| +#line 12204 "configure" |
| #include "confdefs.h" |
| |
| #if HAVE_DLFCN_H |
| @@ -11204,8 +12281,8 @@ |
| |
| |
| fi |
| -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 |
| -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 |
| +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 |
| +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } |
| fi |
| |
| CPPFLAGS="$save_CPPFLAGS" |
| @@ -11243,13 +12320,13 @@ |
| |
| striplib= |
| old_striplib= |
| -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 |
| -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 |
| +{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 |
| +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } |
| if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then |
| test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" |
| test -z "$striplib" && striplib="$STRIP --strip-unneeded" |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| else |
| # FIXME - insert some real tests, host_os isn't really good enough |
| case $host_os in |
| @@ -11257,16 +12334,16 @@ |
| if test -n "$STRIP" ; then |
| striplib="$STRIP -x" |
| old_striplib="$STRIP -S" |
| - echo "$as_me:$LINENO: result: yes" >&5 |
| -echo "${ECHO_T}yes" >&6 |
| + { echo "$as_me:$LINENO: result: yes" >&5 |
| +echo "${ECHO_T}yes" >&6; } |
| else |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| fi |
| ;; |
| *) |
| - echo "$as_me:$LINENO: result: no" >&5 |
| -echo "${ECHO_T}no" >&6 |
| + { echo "$as_me:$LINENO: result: no" >&5 |
| +echo "${ECHO_T}no" >&6; } |
| ;; |
| esac |
| fi |
| @@ -11283,13 +12360,13 @@ |
| |
| |
| # Report which library types will actually be built |
| - echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 |
| -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 |
| - echo "$as_me:$LINENO: result: $can_build_shared" >&5 |
| -echo "${ECHO_T}$can_build_shared" >&6 |
| + { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 |
| +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } |
| + { echo "$as_me:$LINENO: result: $can_build_shared" >&5 |
| +echo "${ECHO_T}$can_build_shared" >&6; } |
| |
| - echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 |
| -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 |
| +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } |
| test "$can_build_shared" = "no" && enable_shared=no |
| |
| # On AIX, shared libraries and static libraries use the same namespace, and |
| @@ -11309,15 +12386,15 @@ |
| fi |
| ;; |
| esac |
| - echo "$as_me:$LINENO: result: $enable_shared" >&5 |
| -echo "${ECHO_T}$enable_shared" >&6 |
| + { echo "$as_me:$LINENO: result: $enable_shared" >&5 |
| +echo "${ECHO_T}$enable_shared" >&6; } |
| |
| - echo "$as_me:$LINENO: checking whether to build static libraries" >&5 |
| -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 |
| + { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 |
| +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } |
| # Make sure either enable_shared or enable_static is yes. |
| test "$enable_shared" = yes || enable_static=yes |
| - echo "$as_me:$LINENO: result: $enable_static" >&5 |
| -echo "${ECHO_T}$enable_static" >&6 |
| + { echo "$as_me:$LINENO: result: $enable_static" >&5 |
| +echo "${ECHO_T}$enable_static" >&6; } |
| |
| |
| |
| @@ -11343,7 +12420,7 @@ |
| |
| |
| |
| - ac_config_commands="$ac_config_commands libtool" |
| + ac_config_commands="$ac_config_commands libtool" |
| |
| |
| |
| @@ -11355,101 +12432,55 @@ |
| |
| if test -n "${sys_dir}"; then |
| case ${sys_dir} in |
| - a29khif) |
| - |
| -subdirs="$subdirs a29khif" |
| + a29khif) subdirs="$subdirs a29khif" |
| ;; |
| - arc) |
| - |
| -subdirs="$subdirs arc" |
| + arc) subdirs="$subdirs arc" |
| ;; |
| - arm) |
| - |
| -subdirs="$subdirs arm" |
| + arm) subdirs="$subdirs arm" |
| ;; |
| - d10v) |
| - |
| -subdirs="$subdirs d10v" |
| + avr32) subdirs="$subdirs avr32" |
| ;; |
| - decstation) |
| - |
| -subdirs="$subdirs decstation" |
| + d10v) subdirs="$subdirs d10v" |
| ;; |
| - h8300hms) |
| - |
| -subdirs="$subdirs h8300hms" |
| + decstation) subdirs="$subdirs decstation" |
| ;; |
| - h8500hms) |
| - |
| -subdirs="$subdirs h8500hms" |
| + h8300hms) subdirs="$subdirs h8300hms" |
| ;; |
| - linux) |
| - |
| -subdirs="$subdirs linux" |
| + h8500hms) subdirs="$subdirs h8500hms" |
| ;; |
| - m88kbug) |
| - |
| -subdirs="$subdirs m88kbug" |
| + linux) subdirs="$subdirs linux" |
| ;; |
| - mmixware) |
| - |
| -subdirs="$subdirs mmixware" |
| + m88kbug) subdirs="$subdirs m88kbug" |
| ;; |
| - netware) |
| - |
| -subdirs="$subdirs netware" |
| + mmixware) subdirs="$subdirs mmixware" |
| ;; |
| - rdos) |
| - |
| -subdirs="$subdirs rdos" |
| + netware) subdirs="$subdirs netware" |
| ;; |
| - rtems) |
| - |
| -subdirs="$subdirs rtems" |
| + rdos) subdirs="$subdirs rdos" |
| ;; |
| - sh) |
| - |
| -subdirs="$subdirs sh" |
| + rtems) subdirs="$subdirs rtems" |
| ;; |
| - sparc64) |
| - |
| -subdirs="$subdirs sparc64" |
| + sh) subdirs="$subdirs sh" |
| ;; |
| - sun4) |
| - |
| -subdirs="$subdirs sun4" |
| + sparc64) subdirs="$subdirs sparc64" |
| ;; |
| - sysmec) |
| - |
| -subdirs="$subdirs sysmec" |
| + sun4) subdirs="$subdirs sun4" |
| ;; |
| - sysnec810) |
| - |
| -subdirs="$subdirs sysnec810" |
| + sysmec) subdirs="$subdirs sysmec" |
| ;; |
| - sysnecv850) |
| - |
| -subdirs="$subdirs sysnecv850" |
| + sysnec810) subdirs="$subdirs sysnec810" |
| ;; |
| - sysvi386) |
| - |
| -subdirs="$subdirs sysvi386" |
| + sysnecv850) subdirs="$subdirs sysnecv850" |
| ;; |
| - sysvnecv70) |
| - |
| -subdirs="$subdirs sysvnecv70" |
| + sysvi386) subdirs="$subdirs sysvi386" |
| ;; |
| - tic80) |
| - |
| -subdirs="$subdirs tic80" |
| + sysvnecv70) subdirs="$subdirs sysvnecv70" |
| ;; |
| - w65) |
| - |
| -subdirs="$subdirs w65" |
| + tic80) subdirs="$subdirs tic80" |
| ;; |
| - z8ksim) |
| - |
| -subdirs="$subdirs z8ksim" |
| + w65) subdirs="$subdirs w65" |
| + ;; |
| + z8ksim) subdirs="$subdirs z8ksim" |
| ;; |
| esac; |
| fi |
| @@ -11471,7 +12502,7 @@ |
| fi |
| |
| |
| - ac_config_files="$ac_config_files Makefile" |
| +ac_config_files="$ac_config_files Makefile" |
| |
| cat >confcache <<\_ACEOF |
| # This file is a shell script that caches the results of configure |
| @@ -11491,39 +12522,58 @@ |
| |
| # The following way of writing the cache mishandles newlines in values, |
| # but we know of no workaround that is simple, portable, and efficient. |
| -# So, don't put newlines in cache variables' values. |
| +# So, we kill variables containing newlines. |
| # Ultrix sh set writes to stderr and can't be redirected directly, |
| # and sets the high bit in the cache file unless we assign to the vars. |
| -{ |
| +( |
| + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do |
| + eval ac_val=\$$ac_var |
| + case $ac_val in #( |
| + *${as_nl}*) |
| + case $ac_var in #( |
| + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| + esac |
| + case $ac_var in #( |
| + _ | IFS | as_nl) ;; #( |
| + *) $as_unset $ac_var ;; |
| + esac ;; |
| + esac |
| + done |
| + |
| (set) 2>&1 | |
| - case `(ac_space=' '; set | grep ac_space) 2>&1` in |
| - *ac_space=\ *) |
| + case $as_nl`(ac_space=' '; set) 2>&1` in #( |
| + *${as_nl}ac_space=\ *) |
| # `set' does not quote correctly, so add quotes (double-quote |
| # substitution turns \\\\ into \\, and sed turns \\ into \). |
| sed -n \ |
| "s/'/'\\\\''/g; |
| s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" |
| - ;; |
| + ;; #( |
| *) |
| # `set' quotes correctly as required by POSIX, so do not add quotes. |
| - sed -n \ |
| - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" |
| + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| ;; |
| - esac; |
| -} | |
| + esac | |
| + sort |
| +) | |
| sed ' |
| + /^ac_cv_env_/b end |
| t clear |
| - : clear |
| + :clear |
| s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ |
| t end |
| - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
| - : end' >>confcache |
| -if diff $cache_file confcache >/dev/null 2>&1; then :; else |
| - if test -w $cache_file; then |
| - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" |
| + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
| + :end' >>confcache |
| +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else |
| + if test -w "$cache_file"; then |
| + test "x$cache_file" != "x/dev/null" && |
| + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 |
| +echo "$as_me: updating cache $cache_file" >&6;} |
| cat confcache >$cache_file |
| else |
| - echo "not updating unwritable cache $cache_file" |
| + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 |
| +echo "$as_me: not updating unwritable cache $cache_file" >&6;} |
| fi |
| fi |
| rm -f confcache |
| @@ -11532,63 +12582,48 @@ |
| # Let make expand exec_prefix. |
| test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
| |
| -# VPATH may cause trouble with some makes, so we remove $(srcdir), |
| -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
| -# trailing colons and then remove the whole line if VPATH becomes empty |
| -# (actually we leave an empty line to preserve line numbers). |
| -if test "x$srcdir" = x.; then |
| - ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
| -s/:*\$(srcdir):*/:/; |
| -s/:*\${srcdir}:*/:/; |
| -s/:*@srcdir@:*/:/; |
| -s/^\([^=]*=[ ]*\):*/\1/; |
| -s/:*$//; |
| -s/^[^=]*=[ ]*$//; |
| -}' |
| -fi |
| - |
| # Transform confdefs.h into DEFS. |
| # Protect against shell expansion while executing Makefile rules. |
| # Protect against Makefile macro expansion. |
| # |
| # If the first sed substitution is executed (which looks for macros that |
| -# take arguments), then we branch to the quote section. Otherwise, |
| +# take arguments), then branch to the quote section. Otherwise, |
| # look for a macro that doesn't take arguments. |
| -cat >confdef2opt.sed <<\_ACEOF |
| +ac_script=' |
| t clear |
| -: clear |
| -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g |
| +:clear |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g |
| t quote |
| -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g |
| +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g |
| t quote |
| -d |
| -: quote |
| -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g |
| -s,\[,\\&,g |
| -s,\],\\&,g |
| -s,\$,$$,g |
| -p |
| -_ACEOF |
| -# We use echo to avoid assuming a particular line-breaking character. |
| -# The extra dot is to prevent the shell from consuming trailing |
| -# line-breaks from the sub-command output. A line-break within |
| -# single-quotes doesn't work because, if this script is created in a |
| -# platform that uses two characters for line-breaks (e.g., DOS), tr |
| -# would break. |
| -ac_LF_and_DOT=`echo; echo .` |
| -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` |
| -rm -f confdef2opt.sed |
| +b any |
| +:quote |
| +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g |
| +s/\[/\\&/g |
| +s/\]/\\&/g |
| +s/\$/$$/g |
| +H |
| +:any |
| +${ |
| + g |
| + s/^\n// |
| + s/\n/ /g |
| + p |
| +} |
| +' |
| +DEFS=`sed -n "$ac_script" confdefs.h` |
| |
| |
| ac_libobjs= |
| ac_ltlibobjs= |
| for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue |
| # 1. Remove the extension, and $U if already installed. |
| - ac_i=`echo "$ac_i" | |
| - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` |
| - # 2. Add them. |
| - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" |
| - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' |
| + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' |
| + ac_i=`echo "$ac_i" | sed "$ac_script"` |
| + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR |
| + # will be set to the directory where LIBOBJS objects are built. |
| + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" |
| + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' |
| done |
| LIBOBJS=$ac_libobjs |
| |
| @@ -11703,17 +12738,45 @@ |
| ## M4sh Initialization. ## |
| ## --------------------- ## |
| |
| -# Be Bourne compatible |
| +# Be more Bourne compatible |
| +DUALCASE=1; export DUALCASE # for MKS sh |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then |
| - set -o posix |
| + setopt NO_GLOB_SUBST |
| +else |
| + case `(set -o) 2>/dev/null` in |
| + *posix*) set -o posix ;; |
| +esac |
| + |
| +fi |
| + |
| + |
| + |
| + |
| +# PATH needs CR |
| +# Avoid depending upon Character Ranges. |
| +as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| +as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| +as_cr_digits='0123456789' |
| +as_cr_alnum=$as_cr_Letters$as_cr_digits |
| + |
| +# The user is always right. |
| +if test "${PATH_SEPARATOR+set}" != set; then |
| + echo "#! /bin/sh" >conf$$.sh |
| + echo "exit 0" >>conf$$.sh |
| + chmod +x conf$$.sh |
| + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| + PATH_SEPARATOR=';' |
| + else |
| + PATH_SEPARATOR=: |
| + fi |
| + rm -f conf$$.sh |
| fi |
| -DUALCASE=1; export DUALCASE # for MKS sh |
| |
| # Support unset when possible. |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| @@ -11723,8 +12786,43 @@ |
| fi |
| |
| |
| +# IFS |
| +# We need space, tab and new line, in precisely that order. Quoting is |
| +# there to prevent editors from complaining about space-tab. |
| +# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| +# splitting by setting IFS to empty value.) |
| +as_nl=' |
| +' |
| +IFS=" "" $as_nl" |
| + |
| +# Find who we are. Look in the path if we contain no directory separator. |
| +case $0 in |
| + *[\\/]* ) as_myself=$0 ;; |
| + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| +for as_dir in $PATH |
| +do |
| + IFS=$as_save_IFS |
| + test -z "$as_dir" && as_dir=. |
| + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| +done |
| +IFS=$as_save_IFS |
| + |
| + ;; |
| +esac |
| +# We did not find ourselves, most probably we were run as `sh COMMAND' |
| +# in which case we are not to be found in the path. |
| +if test "x$as_myself" = x; then |
| + as_myself=$0 |
| +fi |
| +if test ! -f "$as_myself"; then |
| + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| + { (exit 1); exit 1; } |
| +fi |
| + |
| # Work around bugs in pre-3.0 UWIN ksh. |
| -$as_unset ENV MAIL MAILPATH |
| +for as_var in ENV MAIL MAILPATH |
| +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| +done |
| PS1='$ ' |
| PS2='> ' |
| PS4='+ ' |
| @@ -11738,18 +12836,19 @@ |
| if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| eval $as_var=C; export $as_var |
| else |
| - $as_unset $as_var |
| + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| fi |
| done |
| |
| # Required to use basename. |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then |
| +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| as_basename=basename |
| else |
| as_basename=false |
| @@ -11757,159 +12856,120 @@ |
| |
| |
| # Name of the executable. |
| -as_me=`$as_basename "$0" || |
| +as_me=`$as_basename -- "$0" || |
| $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| - X"$0" : 'X\(/\)$' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X/"$0" | |
| - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } |
| - /^X\/\(\/\/\)$/{ s//\1/; q; } |
| - /^X\/\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - |
| - |
| -# PATH needs CR, and LINENO needs CR and PATH. |
| -# Avoid depending upon Character Ranges. |
| -as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| -as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| -as_cr_digits='0123456789' |
| -as_cr_alnum=$as_cr_Letters$as_cr_digits |
| - |
| -# The user is always right. |
| -if test "${PATH_SEPARATOR+set}" != set; then |
| - echo "#! /bin/sh" >conf$$.sh |
| - echo "exit 0" >>conf$$.sh |
| - chmod +x conf$$.sh |
| - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| - PATH_SEPARATOR=';' |
| - else |
| - PATH_SEPARATOR=: |
| - fi |
| - rm -f conf$$.sh |
| -fi |
| + sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\/\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + |
| +# CDPATH. |
| +$as_unset CDPATH |
| |
| |
| - as_lineno_1=$LINENO |
| - as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| - test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" || { |
| - # Find who we are. Look in the path if we contain no path at all |
| - # relative or not. |
| - case $0 in |
| - *[\\/]* ) as_myself=$0 ;; |
| - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in $PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| -done |
| |
| - ;; |
| - esac |
| - # We did not find ourselves, most probably we were run as `sh COMMAND' |
| - # in which case we are not to be found in the path. |
| - if test "x$as_myself" = x; then |
| - as_myself=$0 |
| - fi |
| - if test ! -f "$as_myself"; then |
| - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 |
| -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} |
| - { (exit 1); exit 1; }; } |
| - fi |
| - case $CONFIG_SHELL in |
| - '') |
| - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
| -do |
| - IFS=$as_save_IFS |
| - test -z "$as_dir" && as_dir=. |
| - for as_base in sh bash ksh sh5; do |
| - case $as_dir in |
| - /*) |
| - if ("$as_dir/$as_base" -c ' |
| as_lineno_1=$LINENO |
| as_lineno_2=$LINENO |
| - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
| test "x$as_lineno_1" != "x$as_lineno_2" && |
| - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then |
| - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } |
| - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } |
| - CONFIG_SHELL=$as_dir/$as_base |
| - export CONFIG_SHELL |
| - exec "$CONFIG_SHELL" "$0" ${1+"$@"} |
| - fi;; |
| - esac |
| - done |
| -done |
| -;; |
| - esac |
| + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| |
| # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| # uniformly replaced by the line number. The first 'sed' inserts a |
| - # line-number line before each line; the second 'sed' does the real |
| - # work. The second script uses 'N' to pair each line-number line |
| - # with the numbered line, and appends trailing '-' during |
| - # substitution so that $LINENO is not a special case at line end. |
| + # line-number line after each line using $LINENO; the second 'sed' |
| + # does the real work. The second script uses 'N' to pair each |
| + # line-number line with the line containing $LINENO, and appends |
| + # trailing '-' during substitution so that $LINENO is not a special |
| + # case at line end. |
| # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) |
| - sed '=' <$as_myself | |
| + # scripts with optimization help from Paolo Bonzini. Blame Lee |
| + # E. McMahon (1931-1989) for sed's syntax. :-) |
| + sed -n ' |
| + p |
| + /[$]LINENO/= |
| + ' <$as_myself | |
| sed ' |
| + s/[$]LINENO.*/&-/ |
| + t lineno |
| + b |
| + :lineno |
| N |
| - s,$,-, |
| - : loop |
| - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, |
| + :loop |
| + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| t loop |
| - s,-$,, |
| - s,^['$as_cr_digits']*\n,, |
| + s/-\n.*// |
| ' >$as_me.lineno && |
| - chmod +x $as_me.lineno || |
| - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 |
| -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} |
| + chmod +x "$as_me.lineno" || |
| + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| { (exit 1); exit 1; }; } |
| |
| # Don't try to exec as it changes $[0], causing all sort of problems |
| # (the dirname of $[0] is not the place where we might find the |
| - # original and so on. Autoconf is especially sensible to this). |
| - . ./$as_me.lineno |
| + # original and so on. Autoconf is especially sensitive to this). |
| + . "./$as_me.lineno" |
| # Exit status is that of the last command. |
| exit |
| } |
| |
| |
| -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in |
| - *c*,-n*) ECHO_N= ECHO_C=' |
| -' ECHO_T=' ' ;; |
| - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; |
| - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; |
| +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| + as_dirname=dirname |
| +else |
| + as_dirname=false |
| +fi |
| + |
| +ECHO_C= ECHO_N= ECHO_T= |
| +case `echo -n x` in |
| +-n*) |
| + case `echo 'x\c'` in |
| + *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| + *) ECHO_C='\c';; |
| + esac;; |
| +*) |
| + ECHO_N='-n';; |
| esac |
| |
| -if expr a : '\(a\)' >/dev/null 2>&1; then |
| +if expr a : '\(a\)' >/dev/null 2>&1 && |
| + test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| rm -f conf$$ conf$$.exe conf$$.file |
| +if test -d conf$$.dir; then |
| + rm -f conf$$.dir/conf$$.file |
| +else |
| + rm -f conf$$.dir |
| + mkdir conf$$.dir |
| +fi |
| echo >conf$$.file |
| if ln -s conf$$.file conf$$ 2>/dev/null; then |
| - # We could just check for DJGPP; but this test a) works b) is more generic |
| - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). |
| - if test -f conf$$.exe; then |
| - # Don't use ln at all; we don't have any links |
| + as_ln_s='ln -s' |
| + # ... but there are two gotchas: |
| + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| + # In both cases, we have to default to `cp -p'. |
| + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| as_ln_s='cp -p' |
| - else |
| - as_ln_s='ln -s' |
| - fi |
| elif ln conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s=ln |
| else |
| as_ln_s='cp -p' |
| fi |
| -rm -f conf$$ conf$$.exe conf$$.file |
| +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| +rmdir conf$$.dir 2>/dev/null |
| |
| if mkdir -p . 2>/dev/null; then |
| as_mkdir_p=: |
| @@ -11918,7 +12978,28 @@ |
| as_mkdir_p=false |
| fi |
| |
| -as_executable_p="test -f" |
| +if test -x / >/dev/null 2>&1; then |
| + as_test_x='test -x' |
| +else |
| + if ls -dL / >/dev/null 2>&1; then |
| + as_ls_L_option=L |
| + else |
| + as_ls_L_option= |
| + fi |
| + as_test_x=' |
| + eval sh -c '\'' |
| + if test -d "$1"; then |
| + test -d "$1/."; |
| + else |
| + case $1 in |
| + -*)set "./$1";; |
| + esac; |
| + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| + ???[sx]*):;;*)false;;esac;fi |
| + '\'' sh |
| + ' |
| +fi |
| +as_executable_p=$as_test_x |
| |
| # Sed expression to map a string onto a valid CPP name. |
| as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| @@ -11927,31 +13008,14 @@ |
| as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| |
| |
| -# IFS |
| -# We need space, tab and new line, in precisely that order. |
| -as_nl=' |
| -' |
| -IFS=" $as_nl" |
| - |
| -# CDPATH. |
| -$as_unset CDPATH |
| - |
| exec 6>&1 |
| |
| -# Open the log real soon, to keep \$[0] and so on meaningful, and to |
| +# Save the log message, to keep $[0] and so on meaningful, and to |
| # report actual input values of CONFIG_FILES etc. instead of their |
| -# values after options handling. Logging --version etc. is OK. |
| -exec 5>>config.log |
| -{ |
| - echo |
| - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
| -## Running $as_me. ## |
| -_ASBOX |
| -} >&5 |
| -cat >&5 <<_CSEOF |
| - |
| +# values after options handling. |
| +ac_log=" |
| This file was extended by newlib $as_me 1.17.0, which was |
| -generated by GNU Autoconf 2.59. Invocation command line was |
| +generated by GNU Autoconf 2.61. Invocation command line was |
| |
| CONFIG_FILES = $CONFIG_FILES |
| CONFIG_HEADERS = $CONFIG_HEADERS |
| @@ -11959,30 +13023,19 @@ |
| CONFIG_COMMANDS = $CONFIG_COMMANDS |
| $ $0 $@ |
| |
| -_CSEOF |
| -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 |
| -echo >&5 |
| +on `(hostname || uname -n) 2>/dev/null | sed 1q` |
| +" |
| + |
| _ACEOF |
| |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| # Files that config.status was made for. |
| -if test -n "$ac_config_files"; then |
| - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS |
| -fi |
| - |
| -if test -n "$ac_config_headers"; then |
| - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS |
| -fi |
| - |
| -if test -n "$ac_config_links"; then |
| - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS |
| -fi |
| +config_files="$ac_config_files" |
| +config_commands="$ac_config_commands" |
| |
| -if test -n "$ac_config_commands"; then |
| - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS |
| -fi |
| +_ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| - |
| ac_cs_usage="\ |
| \`$as_me' instantiates files from templates according to the |
| current configuration. |
| @@ -11990,7 +13043,7 @@ |
| Usage: $0 [OPTIONS] [FILE]... |
| |
| -h, --help print this help, then exit |
| - -V, --version print version number, then exit |
| + -V, --version print version number and configuration settings, then exit |
| -q, --quiet do not print progress messages |
| -d, --debug don't remove temporary files |
| --recheck update $as_me by reconfiguring in the same conditions |
| @@ -12004,19 +13057,21 @@ |
| $config_commands |
| |
| Report bugs to <bug-autoconf@gnu.org>." |
| -_ACEOF |
| |
| +_ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| ac_cs_version="\\ |
| newlib config.status 1.17.0 |
| -configured by $0, generated by GNU Autoconf 2.59, |
| - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" |
| +configured by $0, generated by GNU Autoconf 2.61, |
| + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" |
| |
| -Copyright (C) 2003 Free Software Foundation, Inc. |
| +Copyright (C) 2006 Free Software Foundation, Inc. |
| This config.status script is free software; the Free Software Foundation |
| gives unlimited permission to copy, distribute and modify it." |
| -srcdir=$srcdir |
| -INSTALL="$INSTALL" |
| + |
| +ac_pwd='$ac_pwd' |
| +srcdir='$srcdir' |
| +INSTALL='$INSTALL' |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| @@ -12027,60 +13082,42 @@ |
| do |
| case $1 in |
| --*=*) |
| - ac_option=`expr "x$1" : 'x\([^=]*\)='` |
| - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` |
| + ac_option=`expr "X$1" : 'X\([^=]*\)='` |
| + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` |
| ac_shift=: |
| ;; |
| - -*) |
| + *) |
| ac_option=$1 |
| ac_optarg=$2 |
| ac_shift=shift |
| ;; |
| - *) # This is not an option, so the user has probably given explicit |
| - # arguments. |
| - ac_option=$1 |
| - ac_need_defaults=false;; |
| esac |
| |
| case $ac_option in |
| # Handling of the options. |
| -_ACEOF |
| -cat >>$CONFIG_STATUS <<\_ACEOF |
| -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
| ac_cs_recheck=: ;; |
| - --version | --vers* | -V ) |
| - echo "$ac_cs_version"; exit 0 ;; |
| - --he | --h) |
| - # Conflict between --help and --header |
| - { { echo "$as_me:$LINENO: error: ambiguous option: $1 |
| -Try \`$0 --help' for more information." >&5 |
| -echo "$as_me: error: ambiguous option: $1 |
| -Try \`$0 --help' for more information." >&2;} |
| - { (exit 1); exit 1; }; };; |
| - --help | --hel | -h ) |
| - echo "$ac_cs_usage"; exit 0 ;; |
| - --debug | --d* | -d ) |
| + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) |
| + echo "$ac_cs_version"; exit ;; |
| + --debug | --debu | --deb | --de | --d | -d ) |
| debug=: ;; |
| --file | --fil | --fi | --f ) |
| $ac_shift |
| CONFIG_FILES="$CONFIG_FILES $ac_optarg" |
| ac_need_defaults=false;; |
| - --header | --heade | --head | --hea ) |
| - $ac_shift |
| - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" |
| - ac_need_defaults=false;; |
| + --he | --h | --help | --hel | -h ) |
| + echo "$ac_cs_usage"; exit ;; |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil | --si | --s) |
| ac_cs_silent=: ;; |
| |
| # This is an error. |
| - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 |
| -Try \`$0 --help' for more information." >&5 |
| -echo "$as_me: error: unrecognized option: $1 |
| -Try \`$0 --help' for more information." >&2;} |
| + -*) { echo "$as_me: error: unrecognized option: $1 |
| +Try \`$0 --help' for more information." >&2 |
| { (exit 1); exit 1; }; } ;; |
| |
| - *) ac_config_targets="$ac_config_targets $1" ;; |
| + *) ac_config_targets="$ac_config_targets $1" |
| + ac_need_defaults=false ;; |
| |
| esac |
| shift |
| @@ -12096,17 +13133,28 @@ |
| _ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| if \$ac_cs_recheck; then |
| - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
| - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
| + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
| + CONFIG_SHELL=$SHELL |
| + export CONFIG_SHELL |
| + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
| fi |
| |
| _ACEOF |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +exec 5>>config.log |
| +{ |
| + echo |
| + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
| +## Running $as_me. ## |
| +_ASBOX |
| + echo "$ac_log" |
| +} >&5 |
| |
| +_ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| # |
| -# INIT-COMMANDS section. |
| +# INIT-COMMANDS |
| # |
| - |
| AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" |
| |
| |
| @@ -12367,22 +13415,23 @@ |
| |
| _ACEOF |
| |
| - |
| - |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| + |
| +# Handling of arguments. |
| for ac_config_target in $ac_config_targets |
| do |
| - case "$ac_config_target" in |
| - # Handling of arguments. |
| - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
| - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
| - "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; |
| + case $ac_config_target in |
| + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
| + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; |
| + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
| + |
| *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
| echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
| { (exit 1); exit 1; }; };; |
| esac |
| done |
| |
| + |
| # If the user did not use the arguments to specify the items to instantiate, |
| # then the envvar interface is used. Set only those that are not. |
| # We use the long form for the default assignment because of an extremely |
| @@ -12393,397 +13442,493 @@ |
| fi |
| |
| # Have a temporary directory for convenience. Make it in the build tree |
| -# simply because there is no reason to put it here, and in addition, |
| +# simply because there is no reason against having it here, and in addition, |
| # creating and moving files from /tmp can sometimes cause problems. |
| -# Create a temporary directory, and hook for its removal unless debugging. |
| +# Hook for its removal unless debugging. |
| +# Note that there is a small window in which the directory will not be cleaned: |
| +# after its creation but before its name has been assigned to `$tmp'. |
| $debug || |
| { |
| - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 |
| + tmp= |
| + trap 'exit_status=$? |
| + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status |
| +' 0 |
| trap '{ (exit 1); exit 1; }' 1 2 13 15 |
| } |
| - |
| # Create a (secure) tmp directory for tmp files. |
| |
| { |
| - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && |
| + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && |
| test -n "$tmp" && test -d "$tmp" |
| } || |
| { |
| - tmp=./confstat$$-$RANDOM |
| - (umask 077 && mkdir $tmp) |
| + tmp=./conf$$-$RANDOM |
| + (umask 077 && mkdir "$tmp") |
| } || |
| { |
| echo "$me: cannot create a temporary directory in ." >&2 |
| { (exit 1); exit 1; } |
| } |
| |
| -_ACEOF |
| - |
| -cat >>$CONFIG_STATUS <<_ACEOF |
| - |
| # |
| -# CONFIG_FILES section. |
| +# Set up the sed scripts for CONFIG_FILES section. |
| # |
| |
| # No need to generate the scripts if there are no CONFIG_FILES. |
| # This happens for instance when ./config.status config.h |
| -if test -n "\$CONFIG_FILES"; then |
| - # Protect against being on the right side of a sed subst in config.status. |
| - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; |
| - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF |
| -s,@SHELL@,$SHELL,;t t |
| -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t |
| -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t |
| -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t |
| -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t |
| -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t |
| -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t |
| -s,@exec_prefix@,$exec_prefix,;t t |
| -s,@prefix@,$prefix,;t t |
| -s,@program_transform_name@,$program_transform_name,;t t |
| -s,@bindir@,$bindir,;t t |
| -s,@sbindir@,$sbindir,;t t |
| -s,@libexecdir@,$libexecdir,;t t |
| -s,@datadir@,$datadir,;t t |
| -s,@sysconfdir@,$sysconfdir,;t t |
| -s,@sharedstatedir@,$sharedstatedir,;t t |
| -s,@localstatedir@,$localstatedir,;t t |
| -s,@libdir@,$libdir,;t t |
| -s,@includedir@,$includedir,;t t |
| -s,@oldincludedir@,$oldincludedir,;t t |
| -s,@infodir@,$infodir,;t t |
| -s,@mandir@,$mandir,;t t |
| -s,@build_alias@,$build_alias,;t t |
| -s,@host_alias@,$host_alias,;t t |
| -s,@target_alias@,$target_alias,;t t |
| -s,@DEFS@,$DEFS,;t t |
| -s,@ECHO_C@,$ECHO_C,;t t |
| -s,@ECHO_N@,$ECHO_N,;t t |
| -s,@ECHO_T@,$ECHO_T,;t t |
| -s,@LIBS@,$LIBS,;t t |
| -s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t |
| -s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t |
| -s,@newlib_basedir@,$newlib_basedir,;t t |
| -s,@build@,$build,;t t |
| -s,@build_cpu@,$build_cpu,;t t |
| -s,@build_vendor@,$build_vendor,;t t |
| -s,@build_os@,$build_os,;t t |
| -s,@host@,$host,;t t |
| -s,@host_cpu@,$host_cpu,;t t |
| -s,@host_vendor@,$host_vendor,;t t |
| -s,@host_os@,$host_os,;t t |
| -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t |
| -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t |
| -s,@INSTALL_DATA@,$INSTALL_DATA,;t t |
| -s,@CYGPATH_W@,$CYGPATH_W,;t t |
| -s,@PACKAGE@,$PACKAGE,;t t |
| -s,@VERSION@,$VERSION,;t t |
| -s,@ACLOCAL@,$ACLOCAL,;t t |
| -s,@AUTOCONF@,$AUTOCONF,;t t |
| -s,@AUTOMAKE@,$AUTOMAKE,;t t |
| -s,@AUTOHEADER@,$AUTOHEADER,;t t |
| -s,@MAKEINFO@,$MAKEINFO,;t t |
| -s,@install_sh@,$install_sh,;t t |
| -s,@STRIP@,$STRIP,;t t |
| -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t |
| -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t |
| -s,@mkdir_p@,$mkdir_p,;t t |
| -s,@AWK@,$AWK,;t t |
| -s,@SET_MAKE@,$SET_MAKE,;t t |
| -s,@am__leading_dot@,$am__leading_dot,;t t |
| -s,@AMTAR@,$AMTAR,;t t |
| -s,@am__tar@,$am__tar,;t t |
| -s,@am__untar@,$am__untar,;t t |
| -s,@CC@,$CC,;t t |
| -s,@DEPDIR@,$DEPDIR,;t t |
| -s,@am__include@,$am__include,;t t |
| -s,@am__quote@,$am__quote,;t t |
| -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t |
| -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t |
| -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t |
| -s,@CCDEPMODE@,$CCDEPMODE,;t t |
| -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t |
| -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t |
| -s,@AS@,$AS,;t t |
| -s,@ac_ct_AS@,$ac_ct_AS,;t t |
| -s,@AR@,$AR,;t t |
| -s,@ac_ct_AR@,$ac_ct_AR,;t t |
| -s,@RANLIB@,$RANLIB,;t t |
| -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t |
| -s,@READELF@,$READELF,;t t |
| -s,@ac_ct_READELF@,$ac_ct_READELF,;t t |
| -s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t |
| -s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t |
| -s,@MAINT@,$MAINT,;t t |
| -s,@CCAS@,$CCAS,;t t |
| -s,@CCASFLAGS@,$CCASFLAGS,;t t |
| -s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t |
| -s,@LDFLAGS@,$LDFLAGS,;t t |
| -s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t |
| -s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t |
| -s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t |
| -s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t |
| -s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t |
| -s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t |
| -s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t |
| -s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t |
| -s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t |
| -s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t |
| -s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t |
| -s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t |
| -s,@OBJEXT@,$OBJEXT,;t t |
| -s,@oext@,$oext,;t t |
| -s,@aext@,$aext,;t t |
| -s,@lpfx@,$lpfx,;t t |
| -s,@libm_machine_dir@,$libm_machine_dir,;t t |
| -s,@machine_dir@,$machine_dir,;t t |
| -s,@sys_dir@,$sys_dir,;t t |
| -s,@SED@,$SED,;t t |
| -s,@DLLTOOL@,$DLLTOOL,;t t |
| -s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t |
| -s,@OBJDUMP@,$OBJDUMP,;t t |
| -s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t |
| -s,@LIBTOOL@,$LIBTOOL,;t t |
| -s,@CFLAGS@,$CFLAGS,;t t |
| -s,@CPPFLAGS@,$CPPFLAGS,;t t |
| -s,@ac_ct_CC@,$ac_ct_CC,;t t |
| -s,@EXEEXT@,$EXEEXT,;t t |
| -s,@EGREP@,$EGREP,;t t |
| -s,@FGREP@,$FGREP,;t t |
| -s,@GREP@,$GREP,;t t |
| -s,@LD@,$LD,;t t |
| -s,@DUMPBIN@,$DUMPBIN,;t t |
| -s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t |
| -s,@NM@,$NM,;t t |
| -s,@LN_S@,$LN_S,;t t |
| -s,@lt_ECHO@,$lt_ECHO,;t t |
| -s,@DSYMUTIL@,$DSYMUTIL,;t t |
| -s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t |
| -s,@NMEDIT@,$NMEDIT,;t t |
| -s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t |
| -s,@LIPO@,$LIPO,;t t |
| -s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t |
| -s,@OTOOL@,$OTOOL,;t t |
| -s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t |
| -s,@OTOOL64@,$OTOOL64,;t t |
| -s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t |
| -s,@CPP@,$CPP,;t t |
| -s,@subdirs@,$subdirs,;t t |
| -s,@CRT0@,$CRT0,;t t |
| -s,@HAVE_SYS_DIR_TRUE@,$HAVE_SYS_DIR_TRUE,;t t |
| -s,@HAVE_SYS_DIR_FALSE@,$HAVE_SYS_DIR_FALSE,;t t |
| -s,@LIBOBJS@,$LIBOBJS,;t t |
| -s,@LTLIBOBJS@,$LTLIBOBJS,;t t |
| -CEOF |
| - |
| -_ACEOF |
| - |
| - cat >>$CONFIG_STATUS <<\_ACEOF |
| - # Split the substitutions into bite-sized pieces for seds with |
| - # small command number limits, like on Digital OSF/1 and HP-UX. |
| - ac_max_sed_lines=48 |
| - ac_sed_frag=1 # Number of current file. |
| - ac_beg=1 # First line for current file. |
| - ac_end=$ac_max_sed_lines # Line after last line for current file. |
| - ac_more_lines=: |
| - ac_sed_cmds= |
| - while $ac_more_lines; do |
| - if test $ac_beg -gt 1; then |
| - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag |
| - else |
| - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag |
| - fi |
| - if test ! -s $tmp/subs.frag; then |
| - ac_more_lines=false |
| - else |
| - # The purpose of the label and of the branching condition is to |
| - # speed up the sed processing (if there are no `@' at all, there |
| - # is no need to browse any of the substitutions). |
| - # These are the two extra sed commands mentioned above. |
| - (echo ':t |
| - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed |
| - if test -z "$ac_sed_cmds"; then |
| - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" |
| - else |
| - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" |
| - fi |
| - ac_sed_frag=`expr $ac_sed_frag + 1` |
| - ac_beg=$ac_end |
| - ac_end=`expr $ac_end + $ac_max_sed_lines` |
| - fi |
| - done |
| - if test -z "$ac_sed_cmds"; then |
| - ac_sed_cmds=cat |
| +if test -n "$CONFIG_FILES"; then |
| + |
| +_ACEOF |
| + |
| + |
| + |
| +ac_delim='%!_!# ' |
| +for ac_last_try in false false false false false :; do |
| + cat >conf$$subs.sed <<_ACEOF |
| +SHELL!$SHELL$ac_delim |
| +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim |
| +PACKAGE_NAME!$PACKAGE_NAME$ac_delim |
| +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim |
| +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim |
| +PACKAGE_STRING!$PACKAGE_STRING$ac_delim |
| +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim |
| +exec_prefix!$exec_prefix$ac_delim |
| +prefix!$prefix$ac_delim |
| +program_transform_name!$program_transform_name$ac_delim |
| +bindir!$bindir$ac_delim |
| +sbindir!$sbindir$ac_delim |
| +libexecdir!$libexecdir$ac_delim |
| +datarootdir!$datarootdir$ac_delim |
| +datadir!$datadir$ac_delim |
| +sysconfdir!$sysconfdir$ac_delim |
| +sharedstatedir!$sharedstatedir$ac_delim |
| +localstatedir!$localstatedir$ac_delim |
| +includedir!$includedir$ac_delim |
| +oldincludedir!$oldincludedir$ac_delim |
| +docdir!$docdir$ac_delim |
| +infodir!$infodir$ac_delim |
| +htmldir!$htmldir$ac_delim |
| +dvidir!$dvidir$ac_delim |
| +pdfdir!$pdfdir$ac_delim |
| +psdir!$psdir$ac_delim |
| +libdir!$libdir$ac_delim |
| +localedir!$localedir$ac_delim |
| +mandir!$mandir$ac_delim |
| +DEFS!$DEFS$ac_delim |
| +ECHO_C!$ECHO_C$ac_delim |
| +ECHO_N!$ECHO_N$ac_delim |
| +ECHO_T!$ECHO_T$ac_delim |
| +LIBS!$LIBS$ac_delim |
| +build_alias!$build_alias$ac_delim |
| +host_alias!$host_alias$ac_delim |
| +target_alias!$target_alias$ac_delim |
| +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim |
| +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim |
| +newlib_basedir!$newlib_basedir$ac_delim |
| +build!$build$ac_delim |
| +build_cpu!$build_cpu$ac_delim |
| +build_vendor!$build_vendor$ac_delim |
| +build_os!$build_os$ac_delim |
| +host!$host$ac_delim |
| +host_cpu!$host_cpu$ac_delim |
| +host_vendor!$host_vendor$ac_delim |
| +host_os!$host_os$ac_delim |
| +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim |
| +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim |
| +INSTALL_DATA!$INSTALL_DATA$ac_delim |
| +CYGPATH_W!$CYGPATH_W$ac_delim |
| +PACKAGE!$PACKAGE$ac_delim |
| +VERSION!$VERSION$ac_delim |
| +ACLOCAL!$ACLOCAL$ac_delim |
| +AUTOCONF!$AUTOCONF$ac_delim |
| +AUTOMAKE!$AUTOMAKE$ac_delim |
| +AUTOHEADER!$AUTOHEADER$ac_delim |
| +MAKEINFO!$MAKEINFO$ac_delim |
| +install_sh!$install_sh$ac_delim |
| +STRIP!$STRIP$ac_delim |
| +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim |
| +mkdir_p!$mkdir_p$ac_delim |
| +AWK!$AWK$ac_delim |
| +SET_MAKE!$SET_MAKE$ac_delim |
| +am__leading_dot!$am__leading_dot$ac_delim |
| +AMTAR!$AMTAR$ac_delim |
| +am__tar!$am__tar$ac_delim |
| +am__untar!$am__untar$ac_delim |
| +CC!$CC$ac_delim |
| +DEPDIR!$DEPDIR$ac_delim |
| +am__include!$am__include$ac_delim |
| +am__quote!$am__quote$ac_delim |
| +AMDEP_TRUE!$AMDEP_TRUE$ac_delim |
| +AMDEP_FALSE!$AMDEP_FALSE$ac_delim |
| +AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim |
| +CCDEPMODE!$CCDEPMODE$ac_delim |
| +am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim |
| +am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim |
| +AS!$AS$ac_delim |
| +AR!$AR$ac_delim |
| +RANLIB!$RANLIB$ac_delim |
| +READELF!$READELF$ac_delim |
| +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim |
| +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim |
| +MAINT!$MAINT$ac_delim |
| +CCAS!$CCAS$ac_delim |
| +CCASFLAGS!$CCASFLAGS$ac_delim |
| +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim |
| +LDFLAGS!$LDFLAGS$ac_delim |
| +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim |
| +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim |
| +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim |
| +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim |
| +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim |
| +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim |
| +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim |
| +_ACEOF |
| + |
| + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then |
| + break |
| + elif $ac_last_try; then |
| + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 |
| +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} |
| + { (exit 1); exit 1; }; } |
| + else |
| + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " |
| fi |
| -fi # test -n "$CONFIG_FILES" |
| +done |
| + |
| +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` |
| +if test -n "$ac_eof"; then |
| + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` |
| + ac_eof=`expr $ac_eof + 1` |
| +fi |
| + |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
| +_ACEOF |
| +sed ' |
| +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g |
| +s/^/s,@/; s/!/@,|#_!!_#|/ |
| +:n |
| +t n |
| +s/'"$ac_delim"'$/,g/; t |
| +s/$/\\/; p |
| +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n |
| +' >>$CONFIG_STATUS <conf$$subs.sed |
| +rm -f conf$$subs.sed |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +CEOF$ac_eof |
| +_ACEOF |
| + |
| + |
| +ac_delim='%!_!# ' |
| +for ac_last_try in false false false false false :; do |
| + cat >conf$$subs.sed <<_ACEOF |
| +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim |
| +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim |
| +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim |
| +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim |
| +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim |
| +OBJEXT!$OBJEXT$ac_delim |
| +oext!$oext$ac_delim |
| +aext!$aext$ac_delim |
| +lpfx!$lpfx$ac_delim |
| +libm_machine_dir!$libm_machine_dir$ac_delim |
| +machine_dir!$machine_dir$ac_delim |
| +sys_dir!$sys_dir$ac_delim |
| +SED!$SED$ac_delim |
| +DLLTOOL!$DLLTOOL$ac_delim |
| +OBJDUMP!$OBJDUMP$ac_delim |
| +LIBTOOL!$LIBTOOL$ac_delim |
| +CFLAGS!$CFLAGS$ac_delim |
| +CPPFLAGS!$CPPFLAGS$ac_delim |
| +ac_ct_CC!$ac_ct_CC$ac_delim |
| +EXEEXT!$EXEEXT$ac_delim |
| +GREP!$GREP$ac_delim |
| +EGREP!$EGREP$ac_delim |
| +FGREP!$FGREP$ac_delim |
| +LD!$LD$ac_delim |
| +DUMPBIN!$DUMPBIN$ac_delim |
| +ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim |
| +NM!$NM$ac_delim |
| +LN_S!$LN_S$ac_delim |
| +lt_ECHO!$lt_ECHO$ac_delim |
| +DSYMUTIL!$DSYMUTIL$ac_delim |
| +NMEDIT!$NMEDIT$ac_delim |
| +LIPO!$LIPO$ac_delim |
| +OTOOL!$OTOOL$ac_delim |
| +OTOOL64!$OTOOL64$ac_delim |
| +CPP!$CPP$ac_delim |
| +subdirs!$subdirs$ac_delim |
| +CRT0!$CRT0$ac_delim |
| +HAVE_SYS_DIR_TRUE!$HAVE_SYS_DIR_TRUE$ac_delim |
| +HAVE_SYS_DIR_FALSE!$HAVE_SYS_DIR_FALSE$ac_delim |
| +LIBOBJS!$LIBOBJS$ac_delim |
| +LTLIBOBJS!$LTLIBOBJS$ac_delim |
| +_ACEOF |
| + |
| + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 41; then |
| + break |
| + elif $ac_last_try; then |
| + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 |
| +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} |
| + { (exit 1); exit 1; }; } |
| + else |
| + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " |
| + fi |
| +done |
| + |
| +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` |
| +if test -n "$ac_eof"; then |
| + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` |
| + ac_eof=`expr $ac_eof + 1` |
| +fi |
| |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof |
| +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end |
| +_ACEOF |
| +sed ' |
| +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g |
| +s/^/s,@/; s/!/@,|#_!!_#|/ |
| +:n |
| +t n |
| +s/'"$ac_delim"'$/,g/; t |
| +s/$/\\/; p |
| +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n |
| +' >>$CONFIG_STATUS <conf$$subs.sed |
| +rm -f conf$$subs.sed |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| +:end |
| +s/|#_!!_#|//g |
| +CEOF$ac_eof |
| _ACEOF |
| + |
| + |
| +# VPATH may cause trouble with some makes, so we remove $(srcdir), |
| +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
| +# trailing colons and then remove the whole line if VPATH becomes empty |
| +# (actually we leave an empty line to preserve line numbers). |
| +if test "x$srcdir" = x.; then |
| + ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
| +s/:*\$(srcdir):*/:/ |
| +s/:*\${srcdir}:*/:/ |
| +s/:*@srcdir@:*/:/ |
| +s/^\([^=]*=[ ]*\):*/\1/ |
| +s/:*$// |
| +s/^[^=]*=[ ]*$// |
| +}' |
| +fi |
| + |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue |
| - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". |
| - case $ac_file in |
| - - | *:- | *:-:* ) # input from stdin |
| - cat >$tmp/stdin |
| - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` |
| - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; |
| - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` |
| - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; |
| - * ) ac_file_in=$ac_file.in ;; |
| +fi # test -n "$CONFIG_FILES" |
| + |
| + |
| +for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS |
| +do |
| + case $ac_tag in |
| + :[FHLC]) ac_mode=$ac_tag; continue;; |
| + esac |
| + case $ac_mode$ac_tag in |
| + :[FHL]*:*);; |
| + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 |
| +echo "$as_me: error: Invalid tag $ac_tag." >&2;} |
| + { (exit 1); exit 1; }; };; |
| + :[FH]-) ac_tag=-:-;; |
| + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; |
| + esac |
| + ac_save_IFS=$IFS |
| + IFS=: |
| + set x $ac_tag |
| + IFS=$ac_save_IFS |
| + shift |
| + ac_file=$1 |
| + shift |
| + |
| + case $ac_mode in |
| + :L) ac_source=$1;; |
| + :[FH]) |
| + ac_file_inputs= |
| + for ac_f |
| + do |
| + case $ac_f in |
| + -) ac_f="$tmp/stdin";; |
| + *) # Look for the file first in the build tree, then in the source tree |
| + # (if the path is not absolute). The absolute path cannot be DOS-style, |
| + # because $ac_f cannot contain `:'. |
| + test -f "$ac_f" || |
| + case $ac_f in |
| + [\\/$]*) false;; |
| + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; |
| + esac || |
| + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 |
| +echo "$as_me: error: cannot find input file: $ac_f" >&2;} |
| + { (exit 1); exit 1; }; };; |
| + esac |
| + ac_file_inputs="$ac_file_inputs $ac_f" |
| + done |
| + |
| + # Let's still pretend it is `configure' which instantiates (i.e., don't |
| + # use $as_me), people would be surprised to read: |
| + # /* config.h. Generated by config.status. */ |
| + configure_input="Generated from "`IFS=: |
| + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." |
| + if test x"$ac_file" != x-; then |
| + configure_input="$ac_file. $configure_input" |
| + { echo "$as_me:$LINENO: creating $ac_file" >&5 |
| +echo "$as_me: creating $ac_file" >&6;} |
| + fi |
| + |
| + case $ac_tag in |
| + *:-:* | *:-) cat >"$tmp/stdin";; |
| + esac |
| + ;; |
| esac |
| |
| - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. |
| - ac_dir=`(dirname "$ac_file") 2>/dev/null || |
| + ac_dir=`$as_dirname -- "$ac_file" || |
| $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$ac_file" : 'X\(//\)[^/]' \| \ |
| X"$ac_file" : 'X\(//\)$' \| \ |
| - X"$ac_file" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$ac_file" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - { if $as_mkdir_p; then |
| - mkdir -p "$ac_dir" |
| - else |
| - as_dir="$ac_dir" |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + { as_dir="$ac_dir" |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$as_dir" : 'X\(//\)[^/]' \| \ |
| X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 |
| -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| { (exit 1); exit 1; }; }; } |
| - |
| ac_builddir=. |
| |
| -if test "$ac_dir" != .; then |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| + .) # We are building in place. |
| ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| +esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| -esac |
| |
| + case $ac_mode in |
| + :F) |
| + # |
| + # CONFIG_FILE |
| + # |
| |
| case $INSTALL in |
| [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; |
| - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; |
| + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; |
| esac |
| +_ACEOF |
| |
| - if test x"$ac_file" != x-; then |
| - { echo "$as_me:$LINENO: creating $ac_file" >&5 |
| -echo "$as_me: creating $ac_file" >&6;} |
| - rm -f "$ac_file" |
| - fi |
| - # Let's still pretend it is `configure' which instantiates (i.e., don't |
| - # use $as_me), people would be surprised to read: |
| - # /* config.h. Generated by config.status. */ |
| - if test x"$ac_file" = x-; then |
| - configure_input= |
| - else |
| - configure_input="$ac_file. " |
| - fi |
| - configure_input=$configure_input"Generated from `echo $ac_file_in | |
| - sed 's,.*/,,'` by configure." |
| - |
| - # First look for the input files in the build tree, otherwise in the |
| - # src tree. |
| - ac_file_inputs=`IFS=: |
| - for f in $ac_file_in; do |
| - case $f in |
| - -) echo $tmp/stdin ;; |
| - [\\/$]*) |
| - # Absolute (can't be DOS-style, as IFS=:) |
| - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 |
| -echo "$as_me: error: cannot find input file: $f" >&2;} |
| - { (exit 1); exit 1; }; } |
| - echo "$f";; |
| - *) # Relative |
| - if test -f "$f"; then |
| - # Build tree |
| - echo "$f" |
| - elif test -f "$srcdir/$f"; then |
| - # Source tree |
| - echo "$srcdir/$f" |
| - else |
| - # /dev/null tree |
| - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 |
| -echo "$as_me: error: cannot find input file: $f" >&2;} |
| - { (exit 1); exit 1; }; } |
| - fi;; |
| - esac |
| - done` || { (exit 1); exit 1; } |
| +cat >>$CONFIG_STATUS <<\_ACEOF |
| +# If the template does not know about datarootdir, expand it. |
| +# FIXME: This hack should be removed a few years after 2.60. |
| +ac_datarootdir_hack=; ac_datarootdir_seen= |
| + |
| +case `sed -n '/datarootdir/ { |
| + p |
| + q |
| +} |
| +/@datadir@/p |
| +/@docdir@/p |
| +/@infodir@/p |
| +/@localedir@/p |
| +/@mandir@/p |
| +' $ac_file_inputs` in |
| +*datarootdir*) ac_datarootdir_seen=yes;; |
| +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) |
| + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 |
| +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} |
| +_ACEOF |
| +cat >>$CONFIG_STATUS <<_ACEOF |
| + ac_datarootdir_hack=' |
| + s&@datadir@&$datadir&g |
| + s&@docdir@&$docdir&g |
| + s&@infodir@&$infodir&g |
| + s&@localedir@&$localedir&g |
| + s&@mandir@&$mandir&g |
| + s&\\\${datarootdir}&$datarootdir&g' ;; |
| +esac |
| _ACEOF |
| + |
| +# Neutralize VPATH when `$srcdir' = `.'. |
| +# Shell code in configure.ac might set extrasub. |
| +# FIXME: do we really want to maintain this feature? |
| cat >>$CONFIG_STATUS <<_ACEOF |
| sed "$ac_vpsub |
| $extrasub |
| @@ -12791,142 +13936,43 @@ |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| :t |
| /@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
| -s,@configure_input@,$configure_input,;t t |
| -s,@srcdir@,$ac_srcdir,;t t |
| -s,@abs_srcdir@,$ac_abs_srcdir,;t t |
| -s,@top_srcdir@,$ac_top_srcdir,;t t |
| -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t |
| -s,@builddir@,$ac_builddir,;t t |
| -s,@abs_builddir@,$ac_abs_builddir,;t t |
| -s,@top_builddir@,$ac_top_builddir,;t t |
| -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t |
| -s,@INSTALL@,$ac_INSTALL,;t t |
| -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out |
| - rm -f $tmp/stdin |
| - if test x"$ac_file" != x-; then |
| - mv $tmp/out $ac_file |
| - else |
| - cat $tmp/out |
| - rm -f $tmp/out |
| - fi |
| - |
| -done |
| -_ACEOF |
| -cat >>$CONFIG_STATUS <<\_ACEOF |
| - |
| -# |
| -# CONFIG_COMMANDS section. |
| -# |
| -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue |
| - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` |
| - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` |
| - ac_dir=`(dirname "$ac_dest") 2>/dev/null || |
| -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| - X"$ac_dest" : 'X\(//\)[^/]' \| \ |
| - X"$ac_dest" : 'X\(//\)$' \| \ |
| - X"$ac_dest" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| -echo X"$ac_dest" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - { if $as_mkdir_p; then |
| - mkdir -p "$ac_dir" |
| - else |
| - as_dir="$ac_dir" |
| - as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| - X"$as_dir" : 'X\(//\)[^/]' \| \ |
| - X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| -echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 |
| -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} |
| - { (exit 1); exit 1; }; }; } |
| +s&@configure_input@&$configure_input&;t t |
| +s&@top_builddir@&$ac_top_builddir_sub&;t t |
| +s&@srcdir@&$ac_srcdir&;t t |
| +s&@abs_srcdir@&$ac_abs_srcdir&;t t |
| +s&@top_srcdir@&$ac_top_srcdir&;t t |
| +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t |
| +s&@builddir@&$ac_builddir&;t t |
| +s&@abs_builddir@&$ac_abs_builddir&;t t |
| +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t |
| +s&@INSTALL@&$ac_INSTALL&;t t |
| +$ac_datarootdir_hack |
| +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out |
| + |
| +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && |
| + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && |
| + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && |
| + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&5 |
| +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| +which seems to be undefined. Please make sure it is defined." >&2;} |
| |
| - ac_builddir=. |
| - |
| -if test "$ac_dir" != .; then |
| - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + rm -f "$tmp/stdin" |
| + case $ac_file in |
| + -) cat "$tmp/out"; rm -f "$tmp/out";; |
| + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; |
| + esac |
| + ;; |
| |
| -case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| - ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| - ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| -esac |
| + :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 |
| +echo "$as_me: executing $ac_file commands" >&6;} |
| + ;; |
| + esac |
| |
| |
| - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 |
| -echo "$as_me: executing $ac_dest commands" >&6;} |
| - case $ac_dest in |
| - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do |
| + case $ac_file$ac_mode in |
| + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do |
| # Strip MF so we end up with the name of the file. |
| mf=`echo "$mf" | sed -e 's/:.*$//'` |
| # Check whether this is an Automake generated Makefile or not. |
| @@ -12936,18 +13982,29 @@ |
| # each Makefile.in and add a new line on top of each file to say so. |
| # So let's grep whole file. |
| if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then |
| - dirpart=`(dirname "$mf") 2>/dev/null || |
| + dirpart=`$as_dirname -- "$mf" || |
| $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$mf" : 'X\(//\)[^/]' \| \ |
| X"$mf" : 'X\(//\)$' \| \ |
| - X"$mf" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$mf" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$mf" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| else |
| continue |
| fi |
| @@ -12969,49 +14026,76 @@ |
| sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do |
| # Make sure the directory exists. |
| test -f "$dirpart/$file" && continue |
| - fdir=`(dirname "$file") 2>/dev/null || |
| + fdir=`$as_dirname -- "$file" || |
| $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$file" : 'X\(//\)[^/]' \| \ |
| X"$file" : 'X\(//\)$' \| \ |
| - X"$file" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$file" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$file" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| - { if $as_mkdir_p; then |
| - mkdir -p $dirpart/$fdir |
| - else |
| - as_dir=$dirpart/$fdir |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + { as_dir=$dirpart/$fdir |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$as_dir" : 'X\(//\)[^/]' \| \ |
| X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 |
| -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| { (exit 1); exit 1; }; }; } |
| - |
| # echo "creating $dirpart/$file" |
| echo '# dummy' > "$dirpart/$file" |
| done |
| done |
| ;; |
| - libtool ) |
| + "libtool":C) |
| |
| # See if we are running on zsh, and set the options which allow our |
| # commands through without removal of \ escapes. |
| @@ -13652,11 +14736,10 @@ |
| chmod +x "$ofile" |
| |
| ;; |
| + |
| esac |
| -done |
| -_ACEOF |
| +done # for ac_tag |
| |
| -cat >>$CONFIG_STATUS <<\_ACEOF |
| |
| { (exit 0); exit 0; } |
| _ACEOF |
| @@ -13686,7 +14769,7 @@ |
| fi |
| |
| # |
| -# CONFIG_SUBDIRS section, as fixed in confsubdir.m4. |
| +# CONFIG_SUBDIRS section. |
| # |
| if test "$no_recursion" != yes; then |
| |
| @@ -13733,7 +14816,12 @@ |
| case $ac_arg in |
| *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| esac |
| - ac_sub_configure_args="$ac_arg $ac_sub_configure_args" |
| + ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" |
| + |
| + # Pass --silent |
| + if test "$silent" = yes; then |
| + ac_sub_configure_args="--silent $ac_sub_configure_args" |
| + fi |
| |
| ac_popdir=`pwd` |
| for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue |
| @@ -13742,97 +14830,83 @@ |
| # parts of a large source tree are present. |
| test -d "$srcdir/$ac_dir" || continue |
| |
| - { echo "$as_me:$LINENO: configuring in $ac_dir" >&5 |
| -echo "$as_me: configuring in $ac_dir" >&6;} |
| - { if $as_mkdir_p; then |
| - mkdir -p "$ac_dir" |
| - else |
| - as_dir="$ac_dir" |
| + ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" |
| + echo "$as_me:$LINENO: $ac_msg" >&5 |
| + echo "$ac_msg" >&6 |
| + { as_dir="$ac_dir" |
| + case $as_dir in #( |
| + -*) as_dir=./$as_dir;; |
| + esac |
| + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| as_dirs= |
| - while test ! -d "$as_dir"; do |
| - as_dirs="$as_dir $as_dirs" |
| - as_dir=`(dirname "$as_dir") 2>/dev/null || |
| + while :; do |
| + case $as_dir in #( |
| + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| + *) as_qdir=$as_dir;; |
| + esac |
| + as_dirs="'$as_qdir' $as_dirs" |
| + as_dir=`$as_dirname -- "$as_dir" || |
| $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$as_dir" : 'X\(//\)[^/]' \| \ |
| X"$as_dir" : 'X\(//\)$' \| \ |
| - X"$as_dir" : 'X\(/\)' \| \ |
| - . : '\(.\)' 2>/dev/null || |
| + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$as_dir" | |
| - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
| - /^X\(\/\/\)[^/].*/{ s//\1/; q; } |
| - /^X\(\/\/\)$/{ s//\1/; q; } |
| - /^X\(\/\).*/{ s//\1/; q; } |
| - s/.*/./; q'` |
| + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)[^/].*/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\/\)$/{ |
| + s//\1/ |
| + q |
| + } |
| + /^X\(\/\).*/{ |
| + s//\1/ |
| + q |
| + } |
| + s/.*/./; q'` |
| + test -d "$as_dir" && break |
| done |
| - test ! -n "$as_dirs" || mkdir $as_dirs |
| - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 |
| -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} |
| + test -z "$as_dirs" || eval "mkdir $as_dirs" |
| + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| +echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| { (exit 1); exit 1; }; }; } |
| - |
| ac_builddir=. |
| |
| -if test "$ac_dir" != .; then |
| +case "$ac_dir" in |
| +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| +*) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| - # A "../" for each directory in $ac_dir_suffix. |
| - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
| -else |
| - ac_dir_suffix= ac_top_builddir= |
| -fi |
| + # A ".." for each directory in $ac_dir_suffix. |
| + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| + case $ac_top_builddir_sub in |
| + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| + esac ;; |
| +esac |
| +ac_abs_top_builddir=$ac_pwd |
| +ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| +# for backward compatibility: |
| +ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| - .) # No --srcdir option. We are building in place. |
| + .) # We are building in place. |
| ac_srcdir=. |
| - if test -z "$ac_top_builddir"; then |
| - ac_top_srcdir=. |
| - else |
| - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
| - fi ;; |
| - [\\/]* | ?:[\\/]* ) # Absolute path. |
| + ac_top_srcdir=$ac_top_builddir_sub |
| + ac_abs_top_srcdir=$ac_pwd ;; |
| + [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| - ac_top_srcdir=$srcdir ;; |
| - *) # Relative path. |
| - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
| - ac_top_srcdir=$ac_top_builddir$srcdir ;; |
| -esac |
| - |
| -# Do not use `cd foo && pwd` to compute absolute paths, because |
| -# the directories may not exist. |
| -case `pwd` in |
| -.) ac_abs_builddir="$ac_dir";; |
| -*) |
| - case "$ac_dir" in |
| - .) ac_abs_builddir=`pwd`;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; |
| - *) ac_abs_builddir=`pwd`/"$ac_dir";; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_builddir=${ac_top_builddir}.;; |
| -*) |
| - case ${ac_top_builddir}. in |
| - .) ac_abs_top_builddir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; |
| - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_srcdir=$ac_srcdir;; |
| -*) |
| - case $ac_srcdir in |
| - .) ac_abs_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; |
| - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; |
| - esac;; |
| -esac |
| -case $ac_abs_builddir in |
| -.) ac_abs_top_srcdir=$ac_top_srcdir;; |
| -*) |
| - case $ac_top_srcdir in |
| - .) ac_abs_top_srcdir=$ac_abs_builddir;; |
| - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; |
| - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; |
| - esac;; |
| + ac_top_srcdir=$srcdir |
| + ac_abs_top_srcdir=$srcdir ;; |
| + *) # Relative name. |
| + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| + ac_top_srcdir=$ac_top_build_prefix$srcdir |
| + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| esac |
| +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| |
| cd "$ac_dir" |
| @@ -13856,8 +14930,8 @@ |
| # Make the cache file name correct relative to the subdirectory. |
| case $cache_file in |
| [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; |
| - *) # Relative path. |
| - ac_sub_cache_file=$ac_top_builddir$cache_file ;; |
| + *) # Relative name. |
| + ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; |
| esac |
| |
| { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 |
| diff -Naur newlib-1.17.0/newlib/libc/sys/configure.in newlib-1.17.0-new/newlib/libc/sys/configure.in |
| --- newlib-1.17.0/newlib/libc/sys/configure.in 2007-05-24 19:33:37.000000000 +0200 |
| +++ newlib-1.17.0-new/newlib/libc/sys/configure.in 2009-05-22 09:57:50.000000000 +0200 |
| @@ -24,6 +24,7 @@ |
| a29khif) AC_CONFIG_SUBDIRS(a29khif) ;; |
| arc) AC_CONFIG_SUBDIRS(arc) ;; |
| arm) AC_CONFIG_SUBDIRS(arm) ;; |
| + avr32) AC_CONFIG_SUBDIRS(avr32) ;; |
| d10v) AC_CONFIG_SUBDIRS(d10v) ;; |
| decstation) AC_CONFIG_SUBDIRS(decstation) ;; |
| h8300hms) AC_CONFIG_SUBDIRS(h8300hms) ;; |
