/* Script for ld -r: link without relocation */
OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips",
	      "elf64-tradlittlemips")
OUTPUT_ARCH(mips)
 /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */
SECTIONS
{
  /* Read-only sections, merged into text segment: */
  .MIPS.options : { *(.MIPS.options) }
  .note.gnu.build-id : { *(.note.gnu.build-id) }
  .dynamic      0 : { *(.dynamic) }
  .hash         0 : { *(.hash) }
  .gnu.hash     0 : { *(.gnu.hash) }
  .dynsym       0 : { *(.dynsym) }
  .dynstr       0 : { *(.dynstr) }
  .gnu.version  0 : { *(.gnu.version) }
  .gnu.version_d 0: { *(.gnu.version_d) }
  .gnu.version_r 0: { *(.gnu.version_r) }
  .rel.init     0 : { *(.rel.init) }
  .rela.init    0 : { *(.rela.init) }
  .rel.text     0 : { *(.rel.text) }
  .rela.text    0 : { *(.rela.text) }
  .rel.fini     0 : { *(.rel.fini) }
  .rela.fini    0 : { *(.rela.fini) }
  .rel.rodata   0 : { *(.rel.rodata) }
  .rela.rodata  0 : { *(.rela.rodata) }
  .rel.data.rel.ro 0 : { *(.rel.data.rel.ro) }
  .rela.data.rel.ro 0 : { *(.rela.data.rel.ro) }
  .rel.data     0 : { *(.rel.data) }
  .rela.data    0 : { *(.rela.data) }
  .rel.tdata	0 : { *(.rel.tdata) }
  .rela.tdata	0 : { *(.rela.tdata) }
  .rel.tbss	0 : { *(.rel.tbss) }
  .rela.tbss	0 : { *(.rela.tbss) }
  .rel.ctors    0 : { *(.rel.ctors) }
  .rela.ctors   0 : { *(.rela.ctors) }
  .rel.dtors    0 : { *(.rel.dtors) }
  .rela.dtors   0 : { *(.rela.dtors) }
  .rel.got      0 : { *(.rel.got) }
  .rela.got     0 : { *(.rela.got) }
  .rel.dyn      0 : { *(.rel.dyn) }
  .rel.sdata    0 : { *(.rel.sdata) }
  .rela.sdata   0 : { *(.rela.sdata) }
  .rel.sbss     0 : { *(.rel.sbss) }
  .rela.sbss    0 : { *(.rela.sbss) }
  .rel.sdata2   0 : { *(.rel.sdata2) }
  .rela.sdata2  0 : { *(.rela.sdata2) }
  .rel.sbss2    0 : { *(.rel.sbss2) }
  .rela.sbss2   0 : { *(.rela.sbss2) }
  .rel.bss      0 : { *(.rel.bss) }
  .rela.bss     0 : { *(.rela.bss) }
  .rel.iplt     0 :
    {
      *(.rel.iplt)
    }
  .rela.iplt    0 :
    {
      *(.rela.iplt)
    }
  .rel.plt      0 :
    {
      *(.rel.plt)
    }
  .rela.plt     0 :
    {
      *(.rela.plt)
    }
  .init         0 :
  {
    KEEP (*(.init))
  } =0
  .plt          0 : { *(.plt) }
  .iplt         0 : { *(.iplt) }
  .text         0 :
  {
    *(.text .stub)
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
  } =0
  .fini         0 :
  {
    KEEP (*(.fini))
  } =0
  .rodata       0 : { *(.rodata) }
  .rodata1      0 : { *(.rodata1) }
  .sdata2       0 :
  {
    *(.sdata2)
  }
  .sbss2        0 : { *(.sbss2) }
  .eh_frame_hdr : { *(.eh_frame_hdr) }
  .eh_frame     0 : ONLY_IF_RO { KEEP (*(.eh_frame)) }
  .gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table
  .gcc_except_table.*) }
  /* These sections are generated by the Sun/Oracle C++ compiler.  */
  .exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges
  .exception_ranges*) }
  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  /* Exception handling  */
  .eh_frame     0 : ONLY_IF_RW { KEEP (*(.eh_frame)) }
  .gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
  .exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
  /* Thread Local Storage sections  */
  .tdata	0 : { *(.tdata) }
  .tbss		0 : { *(.tbss) }
  .preinit_array   0 :
  {
    KEEP (*(.preinit_array))
  }
  .jcr          0 : { KEEP (*(.jcr)) }
  .data         0 :
  {
    *(.data)
  }
  .data1        0 : { *(.data1) }
  .got.plt      0 : { *(.got.plt) }
  .got          0 : { *(.got) }
  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata        0 :
  {
    *(.sdata)
  }
  .lit8         0 : { *(.lit8) }
  .lit4         0 : { *(.lit4) }
  .srdata       0 : { *(.srdata) }
  .sbss         0 :
  {
    *(.dynsbss)
    *(.sbss)
    *(.scommon)
  }
  .bss          0 :
  {
   *(.dynbss)
   *(.bss)
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.
      FIXME: Why do we need it? When there is no .bss section, we don't
      pad the .data section.  */
  }
  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }
  .comment       0 : { *(.comment) }
  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */
  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }
  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }
  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }
  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }
  /* DWARF 3 */
  .debug_pubtypes 0 : { *(.debug_pubtypes) }
  .debug_ranges   0 : { *(.debug_ranges) }
  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
}