/*
 * ALC260 quirk models
 * included by patch_realtek.c
 */

/* ALC260 models */
enum {
	ALC260_AUTO,
	ALC260_BASIC,
	ALC260_FUJITSU_S702X,
	ALC260_ACER,
	ALC260_WILL,
	ALC260_REPLACER_672V,
	ALC260_FAVORIT100,
#ifdef CONFIG_SND_DEBUG
	ALC260_TEST,
#endif
	ALC260_MODEL_LAST /* last tag */
};

static const hda_nid_t alc260_dac_nids[1] = {
	/* front */
	0x02,
};

static const hda_nid_t alc260_adc_nids[1] = {
	/* ADC0 */
	0x04,
};

static const hda_nid_t alc260_adc_nids_alt[1] = {
	/* ADC1 */
	0x05,
};

/* NIDs used when simultaneous access to both ADCs makes sense.  Note that
 * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
 */
static const hda_nid_t alc260_dual_adc_nids[2] = {
	/* ADC0, ADC1 */
	0x04, 0x05
};

#define ALC260_DIGOUT_NID	0x03
#define ALC260_DIGIN_NID	0x06

static const struct hda_input_mux alc260_capture_source = {
	.num_items = 4,
	.items = {
		{ "Mic", 0x0 },
		{ "Front Mic", 0x1 },
		{ "Line", 0x2 },
		{ "CD", 0x4 },
	},
};

/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
 * headphone jack and the internal CD lines since these are the only pins at
 * which audio can appear.  For flexibility, also allow the option of
 * recording the mixer output on the second ADC (ADC0 doesn't have a
 * connection to the mixer output).
 */
static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
	{
		.num_items = 3,
		.items = {
			{ "Mic/Line", 0x0 },
			{ "CD", 0x4 },
			{ "Headphone", 0x2 },
		},
	},
	{
		.num_items = 4,
		.items = {
			{ "Mic/Line", 0x0 },
			{ "CD", 0x4 },
			{ "Headphone", 0x2 },
			{ "Mixer", 0x5 },
		},
	},

};

/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
 * the Fujitsu S702x, but jacks are marked differently.
 */
static const struct hda_input_mux alc260_acer_capture_sources[2] = {
	{
		.num_items = 4,
		.items = {
			{ "Mic", 0x0 },
			{ "Line", 0x2 },
			{ "CD", 0x4 },
			{ "Headphone", 0x5 },
		},
	},
	{
		.num_items = 5,
		.items = {
			{ "Mic", 0x0 },
			{ "Line", 0x2 },
			{ "CD", 0x4 },
			{ "Headphone", 0x6 },
			{ "Mixer", 0x5 },
		},
	},
};

/* Maxdata Favorit 100XS */
static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
	{
		.num_items = 2,
		.items = {
			{ "Line/Mic", 0x0 },
			{ "CD", 0x4 },
		},
	},
	{
		.num_items = 3,
		.items = {
			{ "Line/Mic", 0x0 },
			{ "CD", 0x4 },
			{ "Mixer", 0x5 },
		},
	},
};

/*
 * This is just place-holder, so there's something for alc_build_pcms to look
 * at when it calculates the maximum number of channels. ALC260 has no mixer
 * element which allows changing the channel mode, so the verb list is
 * never used.
 */
static const struct hda_channel_mode alc260_modes[1] = {
	{ 2, NULL },
};


/* Mixer combinations
 *
 * basic: base_output + input + pc_beep + capture
 * fujitsu: fujitsu + capture
 * acer: acer + capture
 */

static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
	HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
	{ } /* end */
};

static const struct snd_kcontrol_new alc260_input_mixer[] = {
	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
	{ } /* end */
};

/* Fujitsu S702x series laptops.  ALC260 pin usage: Mic/Line jack = 0x12,
 * HP jack = 0x14, CD audio =  0x16, internal speaker = 0x10.
 */
static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
	ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
	HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
	ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
	{ } /* end */
};

/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks.  Note that current
 * versions of the ALC260 don't act on requests to enable mic bias from NID
 * 0x0f (used to drive the headphone jack in these laptops).  The ALC260
 * datasheet doesn't mention this restriction.  At this stage it's not clear
 * whether this behaviour is intentional or is a hardware bug in chip
 * revisions available in early 2006.  Therefore for now allow the
 * "Headphone Jack Mode" control to span all choices, but if it turns out
 * that the lack of mic bias for this NID is intentional we could change the
 * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
 *
 * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
 * don't appear to make the mic bias available from the "line" jack, even
 * though the NID used for this jack (0x14) can supply it.  The theory is
 * that perhaps Acer have included blocking capacitors between the ALC260
 * and the output jack.  If this turns out to be the case for all such
 * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
 * to ALC_PIN_DIR_INOUT_NOMICBIAS.
 *
 * The C20x Tablet series have a mono internal speaker which is controlled
 * via the chip's Mono sum widget and pin complex, so include the necessary
 * controls for such models.  On models without a "mono speaker" the control
 * won't do anything.
 */
static const struct snd_kcontrol_new alc260_acer_mixer[] = {
	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
	ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
			      HDA_OUTPUT),
	HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
			   HDA_INPUT),
	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
	{ } /* end */
};

/* Maxdata Favorit 100XS: one output and one input (0x12) jack
 */
static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
	ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
	HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
	HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
	ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
	{ } /* end */
};

/* Packard bell V7900  ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
 * Line In jack = 0x14, CD audio =  0x16, pc beep = 0x17.
 */
static const struct snd_kcontrol_new alc260_will_mixer[] = {
	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
	{ } /* end */
};

/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
 * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
 */
static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
	HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
	HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
	{ } /* end */
};

/*
 * initialization verbs
 */
static const struct hda_verb alc260_init_verbs[] = {
	/* Line In pin widget for input */
	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
	/* CD pin widget for input */
	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
	/* Mic1 (rear panel) pin widget for input and vref at 80% */
	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
	/* Mic2 (front panel) pin widget for input and vref at 80% */
	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
	/* LINE-2 is used for line-out in rear */
	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	/* select line-out */
	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
	/* LINE-OUT pin */
	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	/* enable HP */
	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
	/* enable Mono */
	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	/* mute capture amp left and right */
	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
	/* set connection select to line in (default select for this ADC) */
	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
	/* mute capture amp left and right */
	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
	/* set connection select to line in (default select for this ADC) */
	{0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
	/* set vol=0 Line-Out mixer amp left and right */
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	/* unmute pin widget amp left and right (no gain on this amp) */
	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* set vol=0 HP mixer amp left and right */
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	/* unmute pin widget amp left and right (no gain on this amp) */
	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* set vol=0 Mono mixer amp left and right */
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	/* unmute pin widget amp left and right (no gain on this amp) */
	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* unmute LINE-2 out pin */
	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
	 * Line In 2 = 0x03
	 */
	/* mute analog inputs */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
	/* mute Front out path */
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	/* mute Headphone out path */
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	/* mute Mono out path */
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{ }
};

/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
 * laptops.  ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
 * audio = 0x16, internal speaker = 0x10.
 */
static const struct hda_verb alc260_fujitsu_init_verbs[] = {
	/* Disable all GPIOs */
	{0x01, AC_VERB_SET_GPIO_MASK, 0},
	/* Internal speaker is connected to headphone pin */
	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
	/* Headphone/Line-out jack connects to Line1 pin; make it an output */
	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	/* Mic/Line-in jack is connected to mic1 pin, so make it an input */
	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
	/* Ensure all other unused pins are disabled and muted. */
	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},

	/* Disable digital (SPDIF) pins */
	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},

	/* Ensure Line1 pin widget takes its input from the OUT1 sum bus
	 * when acting as an output.
	 */
	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},

	/* Start with output sum widgets muted and their output gains at min */
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},

	/* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* Unmute Line1 pin widget output buffer since it starts as an output.
	 * If the pin mode is changed by the user the pin mode control will
	 * take care of enabling the pin's input/output buffers as needed.
	 * Therefore there's no need to enable the input buffer at this
	 * stage.
	 */
	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* Unmute input buffer of pin widget used for Line-in (no equiv
	 * mixer ctrl)
	 */
	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},

	/* Mute capture amp left and right */
	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	/* Set ADC connection select to match default mixer setting - line
	 * in (on mic1 pin)
	 */
	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Do the same for the second ADC: mute capture input amp and
	 * set ADC connection to line in (on mic1 pin)
	 */
	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Mute all inputs to mixer widget (even unconnected ones) */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */

	{ }
};

/* Initialisation sequence for ALC260 as configured in Acer TravelMate and
 * similar laptops (adapted from Fujitsu init verbs).
 */
static const struct hda_verb alc260_acer_init_verbs[] = {
	/* On TravelMate laptops, GPIO 0 enables the internal speaker and
	 * the headphone jack.  Turn this on and rely on the standard mute
	 * methods whenever the user wants to turn these outputs off.
	 */
	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
	/* Internal speaker/Headphone jack is connected to Line-out pin */
	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
	/* Internal microphone/Mic jack is connected to Mic1 pin */
	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
	/* Line In jack is connected to Line1 pin */
	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
	/* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
	/* Ensure all other unused pins are disabled and muted. */
	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	/* Disable digital (SPDIF) pins */
	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},

	/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
	 * bus when acting as outputs.
	 */
	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},

	/* Start with output sum widgets muted and their output gains at min */
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},

	/* Unmute Line-out pin widget amp left and right
	 * (no equiv mixer ctrl)
	 */
	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* Unmute mono pin widget amp output (no equiv mixer ctrl) */
	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* Unmute Mic1 and Line1 pin widget input buffers since they start as
	 * inputs. If the pin mode is changed by the user the pin mode control
	 * will take care of enabling the pin's input/output buffers as needed.
	 * Therefore there's no need to enable the input buffer at this
	 * stage.
	 */
	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},

	/* Mute capture amp left and right */
	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	/* Set ADC connection select to match default mixer setting - mic
	 * (on mic1 pin)
	 */
	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Do similar with the second ADC: mute capture input amp and
	 * set ADC connection to mic to match ALSA's default state.
	 */
	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Mute all inputs to mixer widget (even unconnected ones) */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */

	{ }
};

/* Initialisation sequence for Maxdata Favorit 100XS
 * (adapted from Acer init verbs).
 */
static const struct hda_verb alc260_favorit100_init_verbs[] = {
	/* GPIO 0 enables the output jack.
	 * Turn this on and rely on the standard mute
	 * methods whenever the user wants to turn these outputs off.
	 */
	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
	/* Line/Mic input jack is connected to Mic1 pin */
	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
	/* Ensure all other unused pins are disabled and muted. */
	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	/* Disable digital (SPDIF) pins */
	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},

	/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
	 * bus when acting as outputs.
	 */
	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},

	/* Start with output sum widgets muted and their output gains at min */
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},

	/* Unmute Line-out pin widget amp left and right
	 * (no equiv mixer ctrl)
	 */
	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* Unmute Mic1 and Line1 pin widget input buffers since they start as
	 * inputs. If the pin mode is changed by the user the pin mode control
	 * will take care of enabling the pin's input/output buffers as needed.
	 * Therefore there's no need to enable the input buffer at this
	 * stage.
	 */
	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},

	/* Mute capture amp left and right */
	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	/* Set ADC connection select to match default mixer setting - mic
	 * (on mic1 pin)
	 */
	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Do similar with the second ADC: mute capture input amp and
	 * set ADC connection to mic to match ALSA's default state.
	 */
	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Mute all inputs to mixer widget (even unconnected ones) */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */

	{ }
};

static const struct hda_verb alc260_will_verbs[] = {
	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
	{0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
	{0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
	{0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
	{0x1a, AC_VERB_SET_PROC_COEF, 0x3040},
	{}
};

static const struct hda_verb alc260_replacer_672v_verbs[] = {
	{0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
	{0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
	{0x1a, AC_VERB_SET_PROC_COEF, 0x3050},

	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
	{0x01, AC_VERB_SET_GPIO_DATA, 0x00},

	{0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
	{}
};

/* toggle speaker-output according to the hp-jack state */
static void alc260_replacer_672v_automute(struct hda_codec *codec)
{
        unsigned int present;

	/* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
	present = snd_hda_jack_detect(codec, 0x0f);
	if (present) {
		snd_hda_codec_write_cache(codec, 0x01, 0,
					  AC_VERB_SET_GPIO_DATA, 1);
		snd_hda_codec_write_cache(codec, 0x0f, 0,
					  AC_VERB_SET_PIN_WIDGET_CONTROL,
					  PIN_HP);
	} else {
		snd_hda_codec_write_cache(codec, 0x01, 0,
					  AC_VERB_SET_GPIO_DATA, 0);
		snd_hda_codec_write_cache(codec, 0x0f, 0,
					  AC_VERB_SET_PIN_WIDGET_CONTROL,
					  PIN_OUT);
	}
}

static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
                                       unsigned int res)
{
        if ((res >> 26) == ALC_HP_EVENT)
                alc260_replacer_672v_automute(codec);
}

static const struct hda_verb alc260_hp_dc7600_verbs[] = {
	{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
	{0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
	{}
};

/* Test configuration for debugging, modelled after the ALC880 test
 * configuration.
 */
#ifdef CONFIG_SND_DEBUG
static const hda_nid_t alc260_test_dac_nids[1] = {
	0x02,
};
static const hda_nid_t alc260_test_adc_nids[2] = {
	0x04, 0x05,
};
/* For testing the ALC260, each input MUX needs its own definition since
 * the signal assignments are different.  This assumes that the first ADC
 * is NID 0x04.
 */
static const struct hda_input_mux alc260_test_capture_sources[2] = {
	{
		.num_items = 7,
		.items = {
			{ "MIC1 pin", 0x0 },
			{ "MIC2 pin", 0x1 },
			{ "LINE1 pin", 0x2 },
			{ "LINE2 pin", 0x3 },
			{ "CD pin", 0x4 },
			{ "LINE-OUT pin", 0x5 },
			{ "HP-OUT pin", 0x6 },
		},
        },
	{
		.num_items = 8,
		.items = {
			{ "MIC1 pin", 0x0 },
			{ "MIC2 pin", 0x1 },
			{ "LINE1 pin", 0x2 },
			{ "LINE2 pin", 0x3 },
			{ "CD pin", 0x4 },
			{ "Mixer", 0x5 },
			{ "LINE-OUT pin", 0x6 },
			{ "HP-OUT pin", 0x7 },
		},
        },
};
static const struct snd_kcontrol_new alc260_test_mixer[] = {
	/* Output driver widgets */
	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
	HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
	HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
	HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),

	/* Modes for retasking pin widgets
	 * Note: the ALC260 doesn't seem to act on requests to enable mic
         * bias from NIDs 0x0f and 0x10.  The ALC260 datasheet doesn't
         * mention this restriction.  At this stage it's not clear whether
         * this behaviour is intentional or is a hardware bug in chip
         * revisions available at least up until early 2006.  Therefore for
         * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
         * choices, but if it turns out that the lack of mic bias for these
         * NIDs is intentional we could change their modes from
         * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
	 */
	ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
	ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
	ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
	ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
	ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
	ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),

	/* Loopback mixer controls */
	HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
	HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
	HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
	HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
	HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
	HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
	HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
	HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
	HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
	HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
	HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
	HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),

	/* Controls for GPIO pins, assuming they are configured as outputs */
	ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
	ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
	ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
	ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),

	/* Switches to allow the digital IO pins to be enabled.  The datasheet
	 * is ambigious as to which NID is which; testing on laptops which
	 * make this output available should provide clarification.
	 */
	ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
	ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),

	/* A switch allowing EAPD to be enabled.  Some laptops seem to use
	 * this output to turn on an external amplifier.
	 */
	ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
	ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),

	{ } /* end */
};
static const struct hda_verb alc260_test_init_verbs[] = {
	/* Enable all GPIOs as outputs with an initial value of 0 */
	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
	{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
	{0x01, AC_VERB_SET_GPIO_MASK, 0x0f},

	/* Enable retasking pins as output, initially without power amp */
	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},

	/* Disable digital (SPDIF) pins initially, but users can enable
	 * them via a mixer switch.  In the case of SPDIF-out, this initverb
	 * payload also sets the generation to 0, output to be in "consumer"
	 * PCM format, copyright asserted, no pre-emphasis and no validity
	 * control.
	 */
	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},

	/* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
	 * OUT1 sum bus when acting as an output.
	 */
	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
	{0x0c, AC_VERB_SET_CONNECT_SEL, 0},
	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
	{0x0e, AC_VERB_SET_CONNECT_SEL, 0},

	/* Start with output sum widgets muted and their output gains at min */
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},

	/* Unmute retasking pin widget output buffers since the default
	 * state appears to be output.  As the pin mode is changed by the
	 * user the pin mode control will take care of enabling the pin's
	 * input/output buffers as needed.
	 */
	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
	/* Also unmute the mono-out pin widget */
	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},

	/* Mute capture amp left and right */
	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	/* Set ADC connection select to match default mixer setting (mic1
	 * pin)
	 */
	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Do the same for the second ADC: mute capture input amp and
	 * set ADC connection to mic1 pin
	 */
	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},

	/* Mute all inputs to mixer widget (even unconnected ones) */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */

	{ }
};
#endif

/*
 * ALC260 configurations
 */
static const char * const alc260_models[ALC260_MODEL_LAST] = {
	[ALC260_BASIC]		= "basic",
	[ALC260_FUJITSU_S702X]	= "fujitsu",
	[ALC260_ACER]		= "acer",
	[ALC260_WILL]		= "will",
	[ALC260_REPLACER_672V]	= "replacer",
	[ALC260_FAVORIT100]	= "favorit100",
#ifdef CONFIG_SND_DEBUG
	[ALC260_TEST]		= "test",
#endif
	[ALC260_AUTO]		= "auto",
};

static const struct snd_pci_quirk alc260_cfg_tbl[] = {
	SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
	SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL),
	SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
	SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
	SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
	SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
	SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
	SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
	SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
	SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
	SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
	{}
};

static const struct alc_config_preset alc260_presets[] = {
	[ALC260_BASIC] = {
		.mixers = { alc260_base_output_mixer,
			    alc260_input_mixer },
		.init_verbs = { alc260_init_verbs },
		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
		.dac_nids = alc260_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
		.adc_nids = alc260_dual_adc_nids,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.input_mux = &alc260_capture_source,
	},
	[ALC260_FUJITSU_S702X] = {
		.mixers = { alc260_fujitsu_mixer },
		.init_verbs = { alc260_fujitsu_init_verbs },
		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
		.dac_nids = alc260_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
		.adc_nids = alc260_dual_adc_nids,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
		.input_mux = alc260_fujitsu_capture_sources,
	},
	[ALC260_ACER] = {
		.mixers = { alc260_acer_mixer },
		.init_verbs = { alc260_acer_init_verbs },
		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
		.dac_nids = alc260_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
		.adc_nids = alc260_dual_adc_nids,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
		.input_mux = alc260_acer_capture_sources,
	},
	[ALC260_FAVORIT100] = {
		.mixers = { alc260_favorit100_mixer },
		.init_verbs = { alc260_favorit100_init_verbs },
		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
		.dac_nids = alc260_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
		.adc_nids = alc260_dual_adc_nids,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
		.input_mux = alc260_favorit100_capture_sources,
	},
	[ALC260_WILL] = {
		.mixers = { alc260_will_mixer },
		.init_verbs = { alc260_init_verbs, alc260_will_verbs },
		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
		.dac_nids = alc260_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
		.adc_nids = alc260_adc_nids,
		.dig_out_nid = ALC260_DIGOUT_NID,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.input_mux = &alc260_capture_source,
	},
	[ALC260_REPLACER_672V] = {
		.mixers = { alc260_replacer_672v_mixer },
		.init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
		.dac_nids = alc260_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
		.adc_nids = alc260_adc_nids,
		.dig_out_nid = ALC260_DIGOUT_NID,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.input_mux = &alc260_capture_source,
		.unsol_event = alc260_replacer_672v_unsol_event,
		.init_hook = alc260_replacer_672v_automute,
	},
#ifdef CONFIG_SND_DEBUG
	[ALC260_TEST] = {
		.mixers = { alc260_test_mixer },
		.init_verbs = { alc260_test_init_verbs },
		.num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
		.dac_nids = alc260_test_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
		.adc_nids = alc260_test_adc_nids,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
		.input_mux = alc260_test_capture_sources,
	},
#endif
};