| /* |
| * MPC8568E MDS Device Tree Source |
| * |
| * Copyright 2007, 2008 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /include/ "fsl/mpc8568si-pre.dtsi" |
| |
| / { |
| model = "MPC8568EMDS"; |
| compatible = "MPC8568EMDS", "MPC85xxMDS"; |
| |
| aliases { |
| pci0 = &pci0; |
| pci1 = &pci1; |
| rapidio0 = &rio; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x0>; |
| }; |
| |
| lbc: localbus@e0005000 { |
| reg = <0x0 0xe0005000 0x0 0x1000>; |
| ranges = <0x0 0x0 0xfe000000 0x02000000 |
| 0x1 0x0 0xf8000000 0x00008000 |
| 0x2 0x0 0xf0000000 0x04000000 |
| 0x4 0x0 0xf8008000 0x00008000 |
| 0x5 0x0 0xf8010000 0x00008000>; |
| |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x02000000>; |
| bank-width = <2>; |
| device-width = <2>; |
| }; |
| |
| bcsr@1,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8568mds-bcsr"; |
| reg = <1 0 0x8000>; |
| ranges = <0 1 0 0x8000>; |
| |
| bcsr5: gpio-controller@11 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8568mds-bcsr-gpio"; |
| reg = <0x5 0x1>; |
| gpio-controller; |
| }; |
| }; |
| |
| pib@4,0 { |
| compatible = "fsl,mpc8568mds-pib"; |
| reg = <4 0 0x8000>; |
| }; |
| |
| pib@5,0 { |
| compatible = "fsl,mpc8568mds-pib"; |
| reg = <5 0 0x8000>; |
| }; |
| }; |
| |
| soc: soc8568@e0000000 { |
| ranges = <0x0 0x0 0xe0000000 0x100000>; |
| |
| i2c-sleep-nexus { |
| i2c@3000 { |
| rtc@68 { |
| compatible = "dallas,ds1374"; |
| reg = <0x68>; |
| interrupts = <3 1 0 0>; |
| }; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| tbi-handle = <&tbi0>; |
| phy-handle = <&phy2>; |
| }; |
| |
| mdio@24520 { |
| phy0: ethernet-phy@7 { |
| interrupts = <1 1 0 0>; |
| reg = <0x7>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupts = <2 1 0 0>; |
| reg = <0x1>; |
| device_type = "ethernet-phy"; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupts = <1 1 0 0>; |
| reg = <0x2>; |
| device_type = "ethernet-phy"; |
| }; |
| phy3: ethernet-phy@3 { |
| interrupts = <2 1 0 0>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| enet1: ethernet@25000 { |
| tbi-handle = <&tbi1>; |
| phy-handle = <&phy3>; |
| sleep = <&pmc 0x00000040>; |
| }; |
| |
| mdio@25520 { |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| par_io@e0100 { |
| num-ports = <7>; |
| |
| pio1: ucc_pin@01 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ |
| 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ |
| 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ |
| 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ |
| 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ |
| 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ |
| 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ |
| 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ |
| 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ |
| 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ |
| 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ |
| 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ |
| 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ |
| 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ |
| 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ |
| 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ |
| 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ |
| 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ |
| 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ |
| 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ |
| 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ |
| 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ |
| 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ |
| }; |
| |
| pio2: ucc_pin@02 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ |
| 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ |
| 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ |
| 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ |
| 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ |
| 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ |
| 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ |
| 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ |
| 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ |
| 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ |
| 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ |
| 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ |
| 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ |
| 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ |
| 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ |
| 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ |
| 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ |
| 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ |
| 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ |
| 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ |
| 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ |
| 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ |
| 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ |
| 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ |
| 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ |
| }; |
| }; |
| }; |
| |
| qe: qe@e0080000 { |
| ranges = <0x0 0x0 0xe0080000 0x40000>; |
| reg = <0x0 0xe0080000 0x0 0x480>; |
| |
| spi@4c0 { |
| mode = "cpu"; |
| }; |
| |
| spi@500 { |
| mode = "cpu"; |
| }; |
| |
| enet2: ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| pio-handle = <&pio1>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| enet3: ucc@3000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| pio-handle = <&pio2>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| mdio@2120 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2120 0x18>; |
| compatible = "fsl,ucc-mdio"; |
| |
| /* These are the same PHYs as on |
| * gianfar's MDIO bus */ |
| qe_phy0: ethernet-phy@07 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1 0 0>; |
| reg = <0x7>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy1: ethernet-phy@01 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1 0 0>; |
| reg = <0x1>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy2: ethernet-phy@02 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1 0 0>; |
| reg = <0x2>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy3: ethernet-phy@03 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1 0 0>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| }; |
| |
| pci0: pci@e0008000 { |
| reg = <0x0 0xe0008000 0x0 0x1000>; |
| ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>; |
| clock-frequency = <66666666>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x12 AD18 */ |
| 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0 |
| 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0 |
| 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0 |
| 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0 |
| |
| /* IDSEL 0x13 AD19 */ |
| 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0 |
| 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0 |
| 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 |
| 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>; |
| }; |
| |
| /* PCI Express */ |
| pci1: pcie@e000a000 { |
| ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000 |
| 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>; |
| reg = <0x0 0xe000a000 0x0 0x1000>; |
| pcie@0 { |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x10000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x800000>; |
| }; |
| }; |
| |
| rio: rapidio@e00c00000 { |
| reg = <0x0 0xe00c0000 0x0 0x20000>; |
| port1 { |
| ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| green { |
| gpios = <&bcsr5 1 0>; |
| }; |
| |
| amber { |
| gpios = <&bcsr5 2 0>; |
| }; |
| |
| red { |
| gpios = <&bcsr5 3 0>; |
| }; |
| }; |
| }; |
| |
| /include/ "fsl/mpc8568si-post.dtsi" |
