| /* |
| * Linksys WRT400N board support |
| * |
| * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <asm/mach-ath79/ath79.h> |
| |
| #include "dev-ap9x-pci.h" |
| #include "dev-eth.h" |
| #include "dev-gpio-buttons.h" |
| #include "dev-leds-gpio.h" |
| #include "dev-m25p80.h" |
| #include "machtypes.h" |
| |
| #define WRT400N_GPIO_LED_POWER 1 |
| #define WRT400N_GPIO_LED_WPS_BLUE 4 |
| #define WRT400N_GPIO_LED_WPS_AMBER 5 |
| #define WRT400N_GPIO_LED_WLAN 6 |
| |
| #define WRT400N_GPIO_BTN_RESET 8 |
| #define WRT400N_GPIO_BTN_WLSEC 3 |
| |
| #define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ |
| #define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) |
| |
| #define WRT400N_MAC_ADDR_OFFSET 0x120c |
| #define WRT400N_CALDATA0_OFFSET 0x1000 |
| #define WRT400N_CALDATA1_OFFSET 0x5000 |
| |
| static struct mtd_partition wrt400n_partitions[] = { |
| { |
| .name = "uboot", |
| .offset = 0, |
| .size = 0x030000, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "env", |
| .offset = 0x030000, |
| .size = 0x010000, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "linux", |
| .offset = 0x040000, |
| .size = 0x140000, |
| }, { |
| .name = "rootfs", |
| .offset = 0x180000, |
| .size = 0x630000, |
| }, { |
| .name = "nvram", |
| .offset = 0x7b0000, |
| .size = 0x010000, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "factory", |
| .offset = 0x7c0000, |
| .size = 0x010000, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "language", |
| .offset = 0x7d0000, |
| .size = 0x020000, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "caldata", |
| .offset = 0x7f0000, |
| .size = 0x010000, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "firmware", |
| .offset = 0x040000, |
| .size = 0x770000, |
| } |
| }; |
| |
| static struct flash_platform_data wrt400n_flash_data = { |
| .parts = wrt400n_partitions, |
| .nr_parts = ARRAY_SIZE(wrt400n_partitions), |
| }; |
| |
| static struct gpio_led wrt400n_leds_gpio[] __initdata = { |
| { |
| .name = "wrt400n:blue:wps", |
| .gpio = WRT400N_GPIO_LED_WPS_BLUE, |
| .active_low = 1, |
| }, { |
| .name = "wrt400n:amber:wps", |
| .gpio = WRT400N_GPIO_LED_WPS_AMBER, |
| .active_low = 1, |
| }, { |
| .name = "wrt400n:blue:wlan", |
| .gpio = WRT400N_GPIO_LED_WLAN, |
| .active_low = 1, |
| }, { |
| .name = "wrt400n:blue:power", |
| .gpio = WRT400N_GPIO_LED_POWER, |
| .active_low = 0, |
| .default_trigger = "default-on", |
| } |
| }; |
| |
| static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { |
| { |
| .desc = "reset", |
| .type = EV_KEY, |
| .code = KEY_RESTART, |
| .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, |
| .gpio = WRT400N_GPIO_BTN_RESET, |
| .active_low = 1, |
| }, { |
| .desc = "wlsec", |
| .type = EV_KEY, |
| .code = KEY_WPS_BUTTON, |
| .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, |
| .gpio = WRT400N_GPIO_BTN_WLSEC, |
| .active_low = 1, |
| } |
| }; |
| |
| static void __init wrt400n_setup(void) |
| { |
| u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
| u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; |
| |
| ath79_register_mdio(0, 0x0); |
| |
| ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); |
| ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; |
| ath79_eth0_data.speed = SPEED_100; |
| ath79_eth0_data.duplex = DUPLEX_FULL; |
| |
| ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); |
| ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; |
| ath79_eth1_data.phy_mask = 0x10; |
| |
| ath79_register_eth(0); |
| ath79_register_eth(1); |
| |
| ath79_register_m25p80(&wrt400n_flash_data); |
| |
| ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), |
| wrt400n_leds_gpio); |
| |
| ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, |
| ARRAY_SIZE(wrt400n_gpio_keys), |
| wrt400n_gpio_keys); |
| |
| ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, |
| art + WRT400N_CALDATA1_OFFSET, NULL); |
| } |
| |
| MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); |