| /* |
| * TP-LINK TL-WR1043N/ND board support |
| * |
| * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/rtl8366.h> |
| |
| #include <asm/mach-ath79/ath79.h> |
| #include <asm/mach-ath79/ar71xx_regs.h> |
| |
| #include "dev-eth.h" |
| #include "dev-m25p80.h" |
| #include "dev-gpio-buttons.h" |
| #include "dev-leds-gpio.h" |
| #include "dev-usb.h" |
| #include "dev-wmac.h" |
| #include "machtypes.h" |
| |
| #define TL_WR1043ND_GPIO_LED_USB 1 |
| #define TL_WR1043ND_GPIO_LED_SYSTEM 2 |
| #define TL_WR1043ND_GPIO_LED_QSS 5 |
| #define TL_WR1043ND_GPIO_LED_WLAN 9 |
| |
| #define TL_WR1043ND_GPIO_BTN_RESET 3 |
| #define TL_WR1043ND_GPIO_BTN_QSS 7 |
| |
| #define TL_WR1043ND_GPIO_RTL8366_SDA 18 |
| #define TL_WR1043ND_GPIO_RTL8366_SCK 19 |
| |
| #define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */ |
| #define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL) |
| |
| static const char *tl_wr1043nd_part_probes[] = { |
| "tp-link", |
| NULL, |
| }; |
| |
| static struct flash_platform_data tl_wr1043nd_flash_data = { |
| .part_probes = tl_wr1043nd_part_probes, |
| }; |
| |
| static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { |
| { |
| .name = "tp-link:green:usb", |
| .gpio = TL_WR1043ND_GPIO_LED_USB, |
| .active_low = 1, |
| }, { |
| .name = "tp-link:green:system", |
| .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, |
| .active_low = 1, |
| }, { |
| .name = "tp-link:green:qss", |
| .gpio = TL_WR1043ND_GPIO_LED_QSS, |
| .active_low = 0, |
| }, { |
| .name = "tp-link:green:wlan", |
| .gpio = TL_WR1043ND_GPIO_LED_WLAN, |
| .active_low = 1, |
| } |
| }; |
| |
| static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = { |
| { |
| .desc = "reset", |
| .type = EV_KEY, |
| .code = KEY_RESTART, |
| .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, |
| .gpio = TL_WR1043ND_GPIO_BTN_RESET, |
| .active_low = 1, |
| }, { |
| .desc = "qss", |
| .type = EV_KEY, |
| .code = KEY_WPS_BUTTON, |
| .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, |
| .gpio = TL_WR1043ND_GPIO_BTN_QSS, |
| .active_low = 1, |
| } |
| }; |
| |
| static void tl_wr1043nd_rtl8366rb_hw_reset(bool active) |
| { |
| if (active) |
| ath79_device_reset_set(AR71XX_RESET_GE0_PHY); |
| else |
| ath79_device_reset_clear(AR71XX_RESET_GE0_PHY); |
| } |
| |
| static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = { |
| .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, |
| .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, |
| .hw_reset = tl_wr1043nd_rtl8366rb_hw_reset, |
| }; |
| |
| static struct platform_device tl_wr1043nd_rtl8366rb_device = { |
| .name = RTL8366RB_DRIVER_NAME, |
| .id = -1, |
| .dev = { |
| .platform_data = &tl_wr1043nd_rtl8366rb_data, |
| } |
| }; |
| |
| static void __init tl_wr1043nd_setup(void) |
| { |
| u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); |
| u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); |
| |
| tl_wr1043nd_rtl8366rb_hw_reset(true); |
| |
| ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); |
| ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; |
| ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
| ath79_eth0_data.speed = SPEED_1000; |
| ath79_eth0_data.duplex = DUPLEX_FULL; |
| ath79_eth0_pll_data.pll_1000 = 0x1a000000; |
| |
| ath79_register_eth(0); |
| |
| ath79_register_usb(); |
| |
| ath79_register_m25p80(&tl_wr1043nd_flash_data); |
| |
| ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), |
| tl_wr1043nd_leds_gpio); |
| |
| platform_device_register(&tl_wr1043nd_rtl8366rb_device); |
| |
| ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL, |
| ARRAY_SIZE(tl_wr1043nd_gpio_keys), |
| tl_wr1043nd_gpio_keys); |
| |
| ath79_register_wmac(eeprom, mac); |
| } |
| |
| MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", |
| tl_wr1043nd_setup); |