| /* |
| * MikroTik RouterBOARD 2011 support |
| * |
| * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be> |
| * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) "rb2011: " fmt |
| |
| #include <linux/phy.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/ath9k_platform.h> |
| #include <linux/ar8216_platform.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/flash.h> |
| #include <linux/rle.h> |
| #include <linux/routerboot.h> |
| #include <linux/gpio.h> |
| |
| #include <asm/mach-ath79/ath79.h> |
| #include <asm/mach-ath79/ar71xx_regs.h> |
| |
| #include "common.h" |
| #include "dev-eth.h" |
| #include "dev-m25p80.h" |
| #include "dev-nfc.h" |
| #include "dev-wmac.h" |
| #include "machtypes.h" |
| #include "routerboot.h" |
| |
| #define RB2011_GPIO_NAND_NCE 14 |
| |
| #define RB_ROUTERBOOT_OFFSET 0x0000 |
| #define RB_ROUTERBOOT_SIZE 0xb000 |
| #define RB_HARD_CFG_OFFSET 0xb000 |
| #define RB_HARD_CFG_SIZE 0x1000 |
| #define RB_BIOS_OFFSET 0xd000 |
| #define RB_BIOS_SIZE 0x2000 |
| #define RB_SOFT_CFG_OFFSET 0xf000 |
| #define RB_SOFT_CFG_SIZE 0x1000 |
| |
| #define RB_ART_SIZE 0x10000 |
| |
| static struct mtd_partition rb2011_spi_partitions[] = { |
| { |
| .name = "routerboot", |
| .offset = RB_ROUTERBOOT_OFFSET, |
| .size = RB_ROUTERBOOT_SIZE, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "hard_config", |
| .offset = RB_HARD_CFG_OFFSET, |
| .size = RB_HARD_CFG_SIZE, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "bios", |
| .offset = RB_BIOS_OFFSET, |
| .size = RB_BIOS_SIZE, |
| .mask_flags = MTD_WRITEABLE, |
| }, { |
| .name = "soft_config", |
| .offset = RB_SOFT_CFG_OFFSET, |
| .size = RB_SOFT_CFG_SIZE, |
| } |
| }; |
| |
| static struct mtd_partition rb2011_nand_partitions[] = { |
| { |
| .name = "booter", |
| .offset = 0, |
| .size = (256 * 1024), |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| { |
| .name = "kernel", |
| .offset = (256 * 1024), |
| .size = (4 * 1024 * 1024) - (256 * 1024), |
| }, |
| { |
| .name = "rootfs", |
| .offset = MTDPART_OFS_NXTBLK, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct flash_platform_data rb2011_spi_flash_data = { |
| .parts = rb2011_spi_partitions, |
| .nr_parts = ARRAY_SIZE(rb2011_spi_partitions), |
| }; |
| |
| static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = { |
| .mode = AR8327_PAD_MAC_RGMII, |
| .txclk_delay_en = true, |
| .rxclk_delay_en = true, |
| .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, |
| .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, |
| }; |
| |
| static struct ar8327_platform_data rb2011_ar8327_data = { |
| .pad0_cfg = &rb2011_ar8327_pad0_cfg, |
| .cpuport_cfg = { |
| .force_link = 1, |
| .speed = AR8327_PORT_SPEED_1000, |
| .duplex = 1, |
| .txpause = 1, |
| .rxpause = 1, |
| } |
| }; |
| |
| static struct mdio_board_info rb2011_mdio0_info[] = { |
| { |
| .bus_id = "ag71xx-mdio.0", |
| .phy_addr = 0, |
| .platform_data = &rb2011_ar8327_data, |
| }, |
| }; |
| |
| static void __init rb2011_wlan_init(void) |
| { |
| u8 *hard_cfg = (u8 *) KSEG1ADDR(0x1f000000 + RB_HARD_CFG_OFFSET); |
| u16 tag_len; |
| u8 *tag; |
| char *art_buf; |
| u8 wlan_mac[ETH_ALEN]; |
| int err; |
| |
| err = routerboot_find_tag(hard_cfg, RB_HARD_CFG_SIZE, RB_ID_WLAN_DATA, |
| &tag, &tag_len); |
| if (err) { |
| pr_err("no calibration data found\n"); |
| return; |
| } |
| |
| art_buf = kmalloc(RB_ART_SIZE, GFP_KERNEL); |
| if (art_buf == NULL) { |
| pr_err("no memory for calibration data\n"); |
| return; |
| } |
| |
| err = rle_decode((char *) tag, tag_len, art_buf, RB_ART_SIZE, |
| NULL, NULL); |
| if (err) { |
| pr_err("unable to decode calibration data\n"); |
| goto free; |
| } |
| |
| ath79_init_mac(wlan_mac, ath79_mac_base, 11); |
| ath79_register_wmac(art_buf + 0x1000, wlan_mac); |
| |
| free: |
| kfree(art_buf); |
| } |
| |
| static void rb2011_nand_select_chip(int chip_no) |
| { |
| switch (chip_no) { |
| case 0: |
| gpio_set_value(RB2011_GPIO_NAND_NCE, 0); |
| break; |
| default: |
| gpio_set_value(RB2011_GPIO_NAND_NCE, 1); |
| break; |
| } |
| ndelay(500); |
| } |
| |
| static struct nand_ecclayout rb2011_nand_ecclayout = { |
| .eccbytes = 6, |
| .eccpos = { 8, 9, 10, 13, 14, 15 }, |
| .oobavail = 9, |
| .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } |
| }; |
| |
| static int rb2011_nand_scan_fixup(struct mtd_info *mtd) |
| { |
| struct nand_chip *chip = mtd->priv; |
| |
| if (mtd->writesize == 512) { |
| /* |
| * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot |
| * will not be able to find the kernel that we load. |
| */ |
| chip->ecc.layout = &rb2011_nand_ecclayout; |
| } |
| |
| return 0; |
| } |
| |
| static void __init rb2011_nand_init(void) |
| { |
| ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup); |
| ath79_nfc_set_parts(rb2011_nand_partitions, |
| ARRAY_SIZE(rb2011_nand_partitions)); |
| ath79_nfc_set_select_chip(rb2011_nand_select_chip); |
| ath79_register_nfc(); |
| } |
| |
| static void __init rb2011_gpio_init(void) |
| { |
| gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE"); |
| } |
| |
| static void __init rb2011_setup(void) |
| { |
| rb2011_gpio_init(); |
| |
| ath79_register_m25p80(&rb2011_spi_flash_data); |
| rb2011_nand_init(); |
| |
| ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | |
| AR934X_ETH_CFG_SW_ONLY_MODE); |
| |
| ath79_register_mdio(1, 0x0); |
| ath79_register_mdio(0, 0x0); |
| |
| mdiobus_register_board_info(rb2011_mdio0_info, |
| ARRAY_SIZE(rb2011_mdio0_info)); |
| |
| /* GMAC0 is connected to an ar8327 switch */ |
| ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); |
| ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
| ath79_eth0_data.phy_mask = BIT(0); |
| ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; |
| ath79_eth0_pll_data.pll_1000 = 0x06000000; |
| |
| ath79_register_eth(0); |
| |
| /* GMAC1 is connected to the internal switch */ |
| ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5); |
| ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
| ath79_eth1_data.speed = SPEED_1000; |
| ath79_eth1_data.duplex = DUPLEX_FULL; |
| |
| ath79_register_eth(1); |
| } |
| |
| MIPS_MACHINE(ATH79_MACH_RB_2011L, "2011L", "MikroTik RouterBOARD 2011L", |
| rb2011_setup); |
| |
| static void __init rb2011g_setup(void) |
| { |
| rb2011_setup(); |
| rb2011_wlan_init(); |
| } |
| |
| MIPS_MACHINE(ATH79_MACH_RB_2011G, "2011G", "MikroTik RouterBOARD 2011UAS-2HnD", |
| rb2011g_setup); |